More annual reports from Schmitt Industries, Inc.:
2021 ReportUNITED STATESSECURITIES AND EXCHANGE COMMISSIONWashington, D.C. 20549FORM 10-K(Mark One)xANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934For the fiscal year ended: May 31, 2015or ¨TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF1934For the transition period from to Commission File Number: 000-23996SCHMITT INDUSTRIES, INC.(Exact name of registrant as specified in its charter) Oregon 93-1151989(State or other jurisdiction ofincorporation or organization) (IRS EmployerIdentification Number)2765 N.W. Nicolai StreetPortland, Oregon 97210(Address of principal executive offices) (Zip Code)(503) 227-7908(Registrant’s telephone number, including area code)Securities registered pursuant to Section 12(b) of the Act:Title of each class Name of each exchange on which registeredCommon Stock - no par value The NASDAQ Stock Market LLCSecurities registered pursuant to Section 12(g) of the Act:NoneIndicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No xIndicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No xIndicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter periodthat the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨Indicate by check mark whether the registrant has submitted electronically and posted on its Corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 ofRegulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy orinformation statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and“smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one): Large accelerated filer ¨ Accelerated filer ¨Non-accelerated filer ¨ Smaller reporting company xIndicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No xThe aggregate market value of the voting stock held by non-affiliates of the registrant as of November 28, 2014, the last business day of the registrant’s most recently completed second fiscal quarter, wasapproximately $5,264,900 based upon the closing price of $3.00 reported for such date on the NASDAQ Capital Market. For purposes of this disclosure, shares of Common Stock held by persons who holdmore than 10% of the outstanding shares of Common Stock and shares held by officers and directors of the registrant, have been excluded because such persons may be deemed to be affiliates. This determinationis not necessarily conclusive for other purposes.As of July 31, 2015, the registrant had 2,995,910 outstanding shares of Common Stock.Documents Incorporated by ReferencePortions of the registrant’s definitive Proxy Statement for its 2015 Annual Meeting of Shareholders are incorporated by reference into Part III hereof. PART I Item 1.BusinessForward-Looking StatementsThis Annual Report on Form 10-K (the “Report”), including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” inItem 7, contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 regarding future events and thefuture results of Schmitt Industries, Inc. and its consolidated subsidiaries (the “Company”) that are based on management’s current expectations, estimates,projections and assumptions about the Company’s business. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “sees,” “estimates”and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees offuture performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differmaterially from what is expressed or forecasted in such forward-looking statements due to numerous factors, including, but not limited to, those discussed inthe “Risk Factors” section in Item 1A, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 and elsewherein this Report as well as those discussed from time to time in the Company’s other Securities and Exchange Commission filings and reports. In addition, suchstatements could be affected by general industry and market conditions. Such forward-looking statements speak only as of the date of this Report or, in thecase of any document incorporated by reference, the date of that document, and we do not undertake any obligation to update any forward-lookingstatement to reflect events or circumstances after the date of this Report. If we update or correct one or more forward-looking statements, investors andothers should not conclude that we will make additional updates or corrections with respect to other forward-looking statements.IntroductionSchmitt Industries, Inc. (the Company), an Oregon corporation, designs, manufactures and sells high precision test and measurement products for two mainbusiness segments: the Balancer segment and the Measurement segment. For the Balancer segment, the Company designs, manufactures and sells computer-controlled vibration detection, balancing and process control systems for the worldwide machine tool industry, particularly for grinding machines. Throughits wholly owned subsidiary, Schmitt Measurement Systems, Inc., an Oregon corporation, the Company designs, manufactures and sells laser and white lightsensors for distance, dimensional and area measurement for a wide variety of commercial applications, laser-based microroughness measurement products forthe semiconductor wafer and hard disk drive industries and for other industrial applications, laser-based surface analysis and measurement products for avariety of scientific applications, and ultrasonic measurement products that accurately measure the fill levels of tanks holding propane, diesel and othertank-based liquids and transmit that data via satellite to a secure web site for display (the Measurement segment). The Company also provides sales andservice for Europe and Asia through its wholly owned subsidiary, Schmitt Europe Limited (SEL), located in Coventry, England and through its salesrepresentative office located in Shanghai, China. The Company’s corporate office is located at 2765 N.W. Nicolai Street, Portland, Oregon.“SBS,” “SMS,” “Acuity,” “Xact,” “Lasercheck” and “AccuProfile” are registered trademarks owned by the Company.Balancer SegmentThe Company’s principal product line for this segment is the Schmitt Dynamic Balance System (SBS), which consists of a vibration sensor, a computercontrol unit, and a balance head that is placed either externally on the grinding wheel spindle with the use of a spindle mounted adaptor or internally insidethe spindle bore. The SB-5500 control panel contains up to four slots for additional circuit boards designed for specific functions, such as manual balancing,balancing using hydro chambers and process monitoring, which involves the detection and Page 2 analysis of high frequency noise, known as acoustic emission (AE), generated by the grinding process. SBS products are designed as economical yet highlyprecise measurement and control devices for permanent or portable installation on grinding machines that can detect and correct imbalance caused byvibration as small as 0.02 microns. Customers can also detect and analyze the AE signal generated during grinding or wheel dressing to help monitor andimprove the grinding process. Customers include both end user operators as well as manufacturers of grinding machines worldwide for a wide variety ofindustries that utilize the grinding process, including the automotive, industrial, aerospace, and medical industries where specifications and operatingtolerances on machined parts are increasingly precise.The SB-5500 is fully automated, eliminating the need to pre-balance parts such as grinding wheels. This reduces machine setup time and ensures a smootherand more efficient grinding process. Operating on a principle of mass compensation for wheel imbalance, the balance head contains two movable eccentricweights, each driven by electric motors through a precision gear train. These weights are repositioned to offset any imbalance in a grinding wheel or otherapplication. Imbalance or vibration is picked up by the vibration sensor that feeds the detected signal to the control unit, which filters the signal byrevolutions per minute. The controller then automatically drives the balance head weights in a direction that reduces the amplitude of the vibration signal.The balance cycle is complete when the weights are positioned to achieve the lowest vibration level, as low as 0.02 microns.The SB-5500 also includes an optional Acoustic Emission Monitoring System (AEMS) control card, which uses proprietary acoustic sensor technology tomonitor the AE signal generated on the grinding machine during key events in the grinding process. The AEMS card allows rapid, automatic grinding wheelin-feed, right up to the point of initial contact of the grinding wheel with a new part loaded in the machine. The system can automatically detect the initialcontact and very quickly report this event to the machine control, stopping the wheel in-feed without operator intervention. Part crash occurs when a part orfixture is incorrectly loaded into a grinding machine or some abnormal condition occurs. Rapid in-feed of the wheel may then result in a dangerous orexpensive crash. The AEMS card allows the grinding machine’s operating system (known as a computer numeric control or CNC system) on the machine tomonitor the acoustic levels and detect any unexpected contact when it happens. The system then reports that abnormal contact and instructs the CNCprogram to stop the grinding process, usually within one millisecond.The SB-5500 also offers two process control cards that fit inside the control panel to provide enhanced control of the grinding process: the ExactControl™card and the ExactDress™ card. The ExactControl process control card offers multi-functional grinding process control capability by detecting andanalyzing either the AE signal pattern or the machine power fluctuations and then using one of seven process control strategies to adjust and optimize thegrinding process based on that signal data, resulting in improved part quality and reduced operating costs. Software control strategies includeExactDisplay (graphically displays the measurement signal), ExactGap (displays and evaluates the measurement signal against a predetermined signalthreshold to automatically determine when the grinding wheel touches the work piece and to shorten the time between grinding work pieces), ExactTime(displays and evaluates the time interval of a measurement signal that is above a predetermined signal threshold to monitor the minimum or maximumprocessing time, ExactIntegral (displays and evaluates the area under a measurement signal curve to optimize the grinding process for the particular workpiece), and ExactDress (displays and evaluates the measurement signal and compares it to a standard threshold to optimize the grinding wheel dressprocess).The ExactDress control strategy is also available in a separate process control card as part of the AEMS system to automatically monitor and control thegrinding wheel dressing process. The AE signal pattern of a wheel dress is displayed and compared to a stored “master” AE signal pattern and indicates whenthe dressing process has been successfully completed. Monitoring for AE levels during wheel dressing permits the operator or CNC control to determine if thewheel is being dressed fully across its width, control the aggressiveness of the process and maintain the quality of the dressed wheel to conserve wheelmaterial.Additional SBS products include the SB-2000 and the AE-1000. The SB-2000 is an easy-to-use, compact manual balancing system offering both one and twoplane manual balancing capabilities. The system comes in a Page 3TMTMTMTM dedicated machine installation version (SB-2000) and a portable version (SB-2000-P). Each version of the system displays up to four digits of resolution forvibration and six digits for RPM readings and supports a spindle speed range of 30 to 100,000 RPM. The portable SB-2000-P version attaches magneticallyto any location on the machine for easy setup and use. The AE-1000 is a dedicated AE control platform that reduces air machine grinding time and alerts theoperator to potential grinding wheel crash conditions by using proprietary AE detection technology to monitor the high frequency signals generated by thegrinding process.Notable features of the SBS system include its ability to fit almost all grinding machines, ease of installation, compact and modular construction, ability tobalance a wheel while on a machine, virtual elimination of wheel vibration, automatic monitoring of balancing, display in a variety of languages and inmetric units of measurement, instrument grade calibration, short balance process, measurement of both displacement and/or velocity and minimal operatormaintenance. The SB-5500 also offers the capability of fully integrating its operation and output within any grinding machine’s CNC operating system bythe use of its IVIS (Intelligent Visualization) software.Benefits of using the SBS system include improved quality of finished parts, elimination of grinding gap time in the grind cycle resulting in increasedefficiency and part throughput, ease of product adaptation, monitoring and correction of part crash, minimal downtime, complete and ready installation,elimination of static balancing, longer life of the grinding wheel, diamond dressings and spindle bearings, the ability to balance within 0.02 microns and itsadaptability to all types of machines.Precision grinding is necessary in major manufacturing areas including the automotive industry (gear trains, camshafts, crankshafts, valves), bearings (rollerand tapered types), ceramics (precision shaping), electric motors (shafts), pumps (shafts and turbines), aircraft (engine parts such as turbine blades), andgeneral manufacturing. Precision grinding has an established worldwide presence in all industrialized countries and is expanding as a method of materialremoval and part processing. Within the Company’s customer base for the SBS system, there are three major market segments:Machine Tool Builders – These companies design and manufacture a variety of specialty application grinding machines. SBS systems are distributedto markets throughout the world through machine tool original equipment manufacturers (OEMs), who incorporate the SBS system into their products.Examples of some well-known worldwide machine tool builders who have offered and/or installed the SBS System include Shanghai Machine ToolWorks (China), ANCA (Australia), Capco Machinery (U.S.), Drake Manufacturing (U.S.), Ecotech/SMTW (China/U.S.), Erwin Junker (U.S.), MatrixMachine Tool (U.K.), Schleifring Group (Germany, China), Shaanxi Qinchuan Machinery Development Co. (China), Cinetic Landis Grinding (U.S.),Koyo Machinery (U.S./Japan), Micron Machinery Limited (Japan/U.S.), USACH Technologies (U.S.), Tschudin (U.S.) and Weldon Solutions (U.S.). TheCompany currently sells its products directly to major machine builders throughout the world.Machine Tool Rebuilders – These customers, found in most, if not all, industrialized nations, develop their business by offering to completely updateand refurbish older grinding machines. These rebuilders typically tear the old machine apart and install new components, such as the SBS system. TheCompany currently sells its products directly to major machine rebuilders throughout the world.Grinding Machine Users – These end users become aware of the SBS system through trade shows, trade magazine advertising, distributors, fieldrepresentatives, referrals and new machine suppliers. The Company’s business is conducted worldwide with some better known customers including:Black & Decker, Briggs and Stratton, Schaeffler, Caterpillar, Eaton, Emerson Power Transmission, Cummins Engine, Ford Motor Company, GeneralElectric, General Motors, Ingersoll Rand, Komatsu, Sumitomo Heavy Industries, SKF Bearing Industries, Timken, TRW Automotive Components andUniversal Bearing.For the years ended May 31, 2015, May 31, 2014 and May 31, 2013 (Fiscal 2015, 2014 and 2013), net sales of the Company’s balancing products totaled$7,850,236, $7,721,211 and $7,714,122, respectively. Net sales of balancing products accounted for 60%, 64% and 62% of the Company’s total sales inFiscal 2015, 2014 and 2013, respectively. See Note 6 to Consolidated Financial Statements. Page 4 CompetitionCompetitors in the Balancer Segment primarily come from Germany and Italy. These competitors produce electromechanical and water balancers and processcontrol products similar to SBS. The Company’s primary competitors are Marposs S.p.A., MPM Micro Prazision Marx GmbH and Balance Systems S.r.l.Measurement SegmentWithin the Measurement Segment, the Company designs, manufactures and sells laser and white light sensors for distance, dimensional and areameasurement for a wide variety of commercial applications, laser-based microroughness measurement products for the semiconductor wafer and hard diskdrive industries and for other industrial applications, laser-based surface analysis and measurement products for a variety of scientific applications, andultrasonic measurement products that accurately measure the fill levels of tanks holding propane, diesel and other tank-based liquids and transmit that datavia satellite to a secure web site for display.Laser and White Light SensorsThese products include lasers utilizing both triangulation and time-of-flight methods of measurement, and confocal chromatic white light sensors that areused in a wide range of industrial applications including manufacturing, lumber production, steel casting, glass and paper production, medical imaging,crane control and micron-level part and surface inspection and are sold under the Acuity brand. Presently, there are 12 products offered under the Acuitybrand: The AccuRange (AR)1000, AR2000, AR2500 and AR3000 distance measurement sensors, the AR700, AR500 and AR200 series of triangulating laserdisplacement sensors, the AR CCS Prima and the AR CCS Initial chromatic confocal sensors, the AccuProfile (AP) 400 and AP820 and the Aquity (AQ) 6 2Dlaser line scanners. The Company designs, manufactures and sells the AR200 and AR700 and distributes the AR500, AR1000, AR2000, AR2500, AR3000,AR CCS Prima, AR CCS Initial, AP400, AP820 and the AQ6, primarily into North America.The AR1000, AR2000, AR2500 and AR3000 distance measurement lasers utilize pulsed time of flight measurement principles to accurately measuredistances of up to 30 meters (up to 300 meters with retro-reflective tape) with the AR1000, up to 100 meters (500 meters with retro-reflective tape) with theAR2000, up to 50 meters (500 meters with retro-reflective tape) with the AR2500 and up to 300 meters (3000 meters with retro-reflective tape) with theAR3000. These products are highly versatile, being able to measure distances both indoors and outdoors. Applications include, but are not limited to, loadconfirmation, alignment, lumber positioning, crane monitoring, fill level measurement, velocity measurement and laser altimeter.The AR700 is a triangulation laser displacement sensor that provides superior performance in terms of accuracy, repeatability, and sample speed. The AR700boasts output speeds up to 9400 Hz and resolutions as a micron. The laser will output 9400 distance readings in a single second. The unit is also verycompact, measuring approximately 80% smaller than its predecessor, the AR600. Model variations permit applications up to 50 inches in range. Applicationsinclude high speed road profiling, product dimensional or thickness measurement, rubber thickness measurement, lumber or plywood thickness measurement,carton dimensioning and product positioning.The AR500 is a compact triangulation laser displacement sensor that provides accurate measurements (+/- 0.15% linearity) at high speeds (standard to 9400Hz, high speed option up to 56K Hz). The same compact enclosure houses models with ranges from 5 to 1000 millimeters. Sensor options include blue laserdiodes, faster speeds and cooling jackets. Applications include radiating surfaces and high speed applications such as road texture, ballistics and high speedevent monitoring.The AR200 line is the Company’s most compact series of triangulating laser displacement sensors. Five models cover metric measurement ranges from 6 to100 millimeters. All models boast a 1/500 accuracy rating for measurements within twelve microns. All models are standard with analog, limit switch andserial outputs. The Page 5 AR200 sensors, much like the longer-range AR700 sensors, project a beam of visible laser light that creates a spot on the target surface. Reflected light fromthe surface is viewed from an angle by a line scan camera and the target’s distance is computed from the image pixel data. The AR200-6M, -12M, -25M, -50M, and -100M have ranges in millimeters that match their model number. The AR200 displacement sensor cannot be overloaded and measures accuratelyeven when a mirror reflects the entire light beam back to the detector.The AR CCS Prima white light confocal-chromatic displacement sensor is the most precise measurement system from Acuity. Using a novel optical principleof measuring the reflected light’s component wavelengths, these confocal sensors measure distance and position to within nanometers. These compact probescan measure to opaque, shiny or even transparent surfaces. Unlike the other Acuity distance sensors, the Prima Confocal systems are comprised of an opticalmeasurement “pen” and a separate controller. This controller houses all of the electronics, light source, etc. Only emitted white light and reflected signals arepassed between the pen and the controller via a thin fiber-optic transmission cable. The Confocal-Chromatic Sensors (CCS) are offered in a variety ofmeasurement ranges and standoff distances, each with a corresponding resolution. The shortest-range models resolve to 5 nanometers of height change.The AR CCS Initial confocal sensor is an extremely precise point sensor for measuring displacement and thickness. Each system includes a controller unit, afiber optic cable, a measuring probe and all necessary cables and software. The CCS Initial measures distance and topography of varied targets, includingsilicon, polished metals, glass, contoured lenses, polymers, semiconductor masks and natural materials. The technology in the CCS Initial supportsnanometer-scale resolutions and the system comes in five different measurement models that range from 0.4 to 12.0 mm.The AP400 series line sensors are entry-level two-dimensional CMOS digital sensors for industrial surface dimensioning and measurement applications. Thescanner quickly and accurately generates low noise 2D profile scans of objects, surface or scenes. The sensor has an onboard processor and memory andcomes with AcuityView image analysis software. Typical applications include weld gap tracking and weld bead profiling, positional control of objects andsurfaces, tire profiling, wheel profiling, surface profiling, 3D profile generation and dimensional measurement.The AP820 is a two-dimensional laser line scanner that measures surface height profiles by projecting a beam of visible laser light that creates a line on atargeted surface. The AP820 is a highly accurate sensor for industrial surface dimensional and measurement applications. The scanner quickly and accuratelygenerates low-noise 2D or 3D profile scans of objects, surfaces or scenes. The sensor automatically adjusts laser power and detector exposure to compensatefor varying surface conditions. Typical scanner applications include weld gap tracking and weld bead profiling, positional control of objects and surfaces,tire profiling, wheel profiling, surface profiling, 3D profile generation and dimensional measurement.The new AQ6 laser line sensor offers higher speed and higher resolution, with models from 0.3 megapixels to over 12 megapixels. The AQ6 uses the latest innew high density CMOS camera design with new Gigabit Ethernet communications and the newly released GeniCam high speed vision protocols. Thisallows the customer to increase the resolution on the target and reduce the amount of sensors needed for larger parts. The new outputs also will allow for afaster and less expensive integration of the sensor into the customer’s application. Applications include pipe and tube manufacturers, large laser lineapplications for flaw detection and high accuracy scans of difficult targets. The AQ6 also lends itself to custom OEM applications with laser lines of over 80inches in length. Currently there are nine AQ6 models available.Surface Roughness Measurement ProductsThese products use a patented technology using laser light scatterometry to perform rapid, accurate, repeatable, non-destructive and non-contact surfacemeasurement tests that quantify surface micro-roughness. The Page 6 technology is extremely precise, measuring surface roughness at the molecular (sub-Angstrom) level. Products are sold to manufacturers of hard disk drives,semiconductors, silicon wafers and optical products and industries involved in fabrication processes that require precise and reliable measurements.Computer hard disk drives require exact manufacturing control and a narrow tolerance band for acceptable roughness, with surface roughness outside thatnarrow band resulting in a reduction in data density or storage capacity. The Company’s technology simultaneously measures disk surface roughness in twodirections, radially, when the read/write head is moving to another disk sector, and circumferentially, when the read/write head is processing information onthe disk. The two separate roughness levels are required for proper head operation. The Company believes the precise measurement methods provided by itsproducts are not possible through any other cost-effective measurement means.The Company’s product for the disk industry is the TMS (Texture Measurement System) 2000-RC, an accurate non-contact texture measurement system. Theproduct (used on aluminum substrates) is currently used worldwide by most major disk drive manufacturers, providing fast, accurate and repeatablemicroroughness measurements while quadrupling production throughput when compared to other testing devices. Surface roughness can be measured tolevels below 0.5 Angstroms. An Angstrom (Å) is a unit of measure equal to 1 hundred-millionth of a centimeter (the point of a needle is one million Å indiameter).The Company offers two products devoted to the semiconductor wafer industry: the TMS2000W-RC and TMS3000W-RC. Both products provide fast,accurate, repeatable measurements for manufacturers of silicon wafers, device quality semiconductors and memory devices. This industry demandsmanufacturing precision to increase performance and capacity and these products help achieve those goals. Silicon wafers are carefully cut and polished toprovide the base upon which a computer or memory chip is produced. Therefore, chip manufacturing is extremely dependent on the beginning surfaceroughness of the wafer. Since all silicon wafers exhibit a microscopic level of surface roughness stemming from production techniques such as chemicaldeposition, grinding, polishing and etching, some method of measuring surface roughness is required. The Company’s wafer measurement products provide away for customers to quantify and control their manufacturing process. The system provides measurements to less than 0.5 Å.The Company also offers the Lasercheck line of surface roughness measurement gauges. Lasercheck is a unique laser-based non-contact roughness gaugeincorporating patented laser light-scatter technology that can make precise and repeatable surface roughness measurements in the 0.025 to 2 micron (<1.0 to80 micro inches) range. Lasercheck provides high-speed in-process measurements in a fraction of a second and is optimized for surface measurements ofground, sanded, polished, hone, super-finished and shot-blasted surfaces.Laser Light-Scatter Surface Measurement ProductsThe Company’s CASI (Complete Angle Scatter Instrument) Scatterometers are sold to companies and institutions involved in scientific research anddevelopment. The CASI Scatterometer uses visible, ultraviolet or infrared laser light as a nondestructive probe to measure surface quality, opticalperformance, smoothness, appearance, defects and contamination on a wide variety of materials. These products are scientific measurement instrumentsproviding customers with molecular-level precision in roughness measurement of optical surfaces, diffuse materials, semiconductor wafers, magnetic storagemedia and precision-machined surfaces, as well as surfaces affecting the cosmetic appearance of consumer products.The MicroScan system is a portable device consisting of a hand-held control unit, an interchangeable measurement head and a separate charging unit. Toperform a measurement, the operator places the measurement head on the objective area and presses a button. Each measurement takes less than five secondswith results displayed and stored in system memory. The MicroScan can store 700 measurements in 255 files and provides the capability to program pass/failcriteria. Software is available for control, analysis and file conversion. From a single measurement, a user can determine RMS surface roughness, reflectanceand scatter light levels (BRDF) on either flat or curved surfaces and under any lighting conditions. Page 7 CompetitionManagement believes the TMS and Lasercheck surface measurement products are two of only a few systems that provide fast, accurate, repeatable non-contact microroughness measurement for a wide variety of commercial customers. The Company believes its surface measurement products are currently theonly systems that can provide measurements as low as a few hundredths of an Å, with reproducibility +/- 0.2Å or 1% and repeatability of +/-0.1Å. There aredifferences between our surface measurement products and other optical techniques (which include profilometers, scanning tunneling microscopes, atomicforce microscopes or interferometers). These other technologies require the intervention of a skilled operator to perform measurements relatively slowly,whereas our surface measurement products are much simpler and, consequently, can make measurements more rapidly while still maintaining excellentrepeatability and accuracy. Stylus profilometers are simpler devices that require less skilled operators. However, measurements must be conducted undervibration isolation conditions, and large areas require numerous scans; thus, stylus profilometers are generally destructive to soft materials such as mostcoated optics.The market for distance measurement and dimensional sizing products is extremely competitive, characterized by rapidly changing technology. TheCompany believes the principal elements of competition include quality of ongoing technical support and maintenance coupled with responsiveness tocustomer needs, as well as price, product quality, reliability and performance. The differences between the Company’s sensors and competitive productsinclude pushbutton selection of output signals in certain models and sensors that can be programmed using serial commands through a PC computer.Competing surface measurement products and dimensional sizing products come from established multinational competitors, most of which are significantlylarger and have greater financial, engineering, manufacturing and marketing resources. Company pricing is intended to obtain market share and meetcompetitive supplier prices. The market strategy is to establish measurement products with the best quality, reliability and performance and superioreconomic value.Remote Tank Monitoring ProductsThe Company’s Xact Tank Monitoring System provides remote fill level monitoring of propane, diesel and other tank-based liquids for tanks, large or small,anywhere in the world. Accessing accurate fill level information is essential to effectively manage inventory, improve delivery efficiency, reduce operatingcosts and increase profitability, and justify capital expenditures. The Xact system utilizes an ultrasonic sensor that is applied externally to the tank tocalculate the fill level inside the tank with great accuracy (+/- 2% for large tanks, +/-1% for small tanks). The Xact system can also be installed to measure thefill levels of bobtail and transport trucks. For smaller tanks that are difficult to access or where the precise accuracy provided by the ultrasonic sensor is not asimportant, Xact also offers a sensor that is affixed to the dial of a preinstalled float gauge (known as a “gauge reader”) which detects the fill level that isreported by the gauge. Float gauges have a typical accuracy of +/- 8% to 12%. Tank fill data is then transmitted via the Globalstar satellite network to asecure website for display. There is no reliance on phone land lines or cellular networks and therefore no dropped data. The use of satellite telemetry permitsmonitoring of any tank anywhere in the world. With the Xact system, minimum or maximum alarm or fill levels can be set to automatically notify operatorsby email anytime a particular tank reading exceeds thresholds or needs refilling. The Xact system can be used to monitor tanks as small as 125 gallons (473liters) and as large as 90,000 gallons (340,686 liters). With Xact, operators can obtain timely and accurate readings of inventory levels and tank refillrequirements instantly.There are three main components to the Xact Tank Monitoring System:Tank SensorThe Xact ultrasonic sensor incorporates patented technology and is externally mounted to the bottom of the tank. The sensor produces a smallelectrical pulse, or a “ping,” that travels through the tank’s steel shell, which is reflected off the bottom surface of the liquid stored in the tank in theform of an echo that is Page 8® detected by the sensor. The time of flight between the “ping” and the echo, which is measured in milliseconds, is then calculated to determine, basedupon additional data regarding tank size and shape, the volume of liquid the tank contains. This information is then remotely transmitted via a satelliteradio transmitter. For smaller tanks that are difficult to access or where the precise accuracy provided by the ultrasonic sensor is not as important, Xactalso offers a sensor that is affixed to the dial of a preinstalled float gauge (known as a “gauge reader”).The gauge reader detects the fill level that isreported by the gauge and transmits that data by satellite in the same manner as the ultrasonic sensor. Float gauges have a typical accuracy range of +/-8% to 12%.Satellite Radio TransmitterThe Xact radio transmitter is placed on the top of the tank and is connected by cable to the tank sensor or gauge reader. The satellite transmittertransmits the tank data using the GlobalStar satellite network to a GlobalStar ground station and then to the Xact secure website where the tank datais displayed or is automatically directed to a customer’s automated inventory or delivery management system.Xact WebsiteThe Xact website is a secured location providing controlled access to the tank data for each customer’s various tank locations. The tank fill level dataand geometry of the tank are used to calculate and display the precise fill level at predetermined measurement times along with additional informationsuch as temperature, battery status, GPS coordinates and map location, fill levels that trigger email notification and the list of email recipients. Inaddition to the data being displayed on the website, the data can also be automatically directed to a customer’s automated inventory or deliverymanagement system for full automation of the delivery process. Operators can now obtain highly accurate readings and tank information from even themost remote tanks conveniently and cost-effectively using their desktop computer, laptop, tablet or smart phone.BenefitsBenefits of using the Xact Tank Monitoring System include external mounting with no reliance on existing mechanical gauges when using the ultrasonicsensors, tank fill data is sent directly and instantly from the tank to the user via satellite, no reliance on telephone lines or cellular networks and no droppeddata, temperature adjusted readings for accuracy within +/- 2% for large tanks and +/- 1% for smaller tanks when using the ultrasonic sensor, user-set alarmlevels and automatic low tank-level messaging via email or cell phone, the ability to operate in a wide range of operating environments from -40ºC to 60ºC,long battery life, quick and easy installation, secure data transmission via satellite, the ability to integrate directly into delivery scheduling managementsystems and the ability to monitor any tank anywhere in the world.CustomersCustomers of the Xact Tank Monitoring System include large, regional and local propane distributors, such as Superior Propane (Canada), Suburban Propane(U.S.), AmeriGas (U.S.), Pacific Propane (U.S.) and TermoGas (Mexico). The Company is focusing its business development efforts on the propane industry inthe United States, Canada, Mexico, Central and South America.CompetitionManagement believes that the Xact Tank Monitoring System offers the only ultrasonic sensor specifically designed to provide independent precise tanklevel calculation while most other competitors utilize gauge-reading technology, which reads the tank fill level from a pre-installed float gauge and is lessaccurate. Competitors offer telemetry options based on cellular or closed loop communication networks whereas Xact telemetry is satellite based.Competitors include, but are not limited to, Independent Technologies, Inc. (Wesroc), NasCorp (SkyTracker), WacnGo, Silicon Controls, TankLink,Centeron, TankScan and Enertrack. Page 9®® In Fiscal 2015, 2014 and 2013, net sales of Measurement products totaled $5,218,855, $4,413,295 and $4,738,130, respectively, and accounted for 40%,36% and 38% of the Company’s total sales in Fiscal 2015, 2014 and 2013, respectively. See Note 6 to Consolidated Financial Statements.Sales by Geographic AreaIn Fiscal 2015, 2014 and 2013, the Company recorded net sales of its products in the United States, its country of domicile, of $7,174,257, $6,704,239 and$7,431,528, respectively. Net sales in the last three fiscal years by geographic areas were: NorthAmerica Europe Asia Others Fiscal 2015 $8,165,268 $1,194,186 $3,388,757 $320,880 Fiscal 2014 $7,474,067 $1,773,928 $2,693,767 $192,744 Fiscal 2013 $8,413,970 $1,192,049 $2,499,593 $346,640 Business and Marketing StrategyThe Company designs, manufactures and markets all of its products with operations divided into a number of different channels and geographies.Balancer Segment ProductsThe Company markets and sells its SBS products in a variety of ways. First are the channels provided by independent manufacturers’ representatives anddistributors. There are currently approximately 65 individuals and/or organizations throughout the world acting in one of these capacities, includingapproximately 15 in the United States and 15 in China.Second, OEMs integrate the Balancer Segment products on the machine tools they produce. Users thus purchase the SBS products concurrently with themachine tools. Conversely, end users of grinding machines that have purchased the SBS system directly from the Company, and after enjoying the benefits ofthe products, often request that SBS products be included with the new equipment they order from OEMs. The SBS Systems are often installed by machinetool builders prior to displaying their own machine tools at various trade shows, becoming endorsements that prove beneficial to the Company’s sales efforts.Third, worldwide trade shows have proven to be an excellent source of business. Company representatives, usually one or more of the marketing managersand the CEO, attend these events along with local Company representatives. These individuals operate a display booth featuring an SBS Systemdemonstration stand and product and technical literature. Representatives from all facets of the Company’s target markets attend these trade shows.In North America and Asia, products are shipped directly to customers from the Company’s factory in Portland, Oregon. Where the Company has distributors,the product is shipped to the distributor, who in turn pays the Company directly and then delivers and installs the product for the end user. Europeandistribution to customers is handled by shipping the product directly from the Company’s Portland headquarters to its European subsidiary in the UnitedKingdom, which in turn sells and distributes the products.Measurement Segment ProductsSimilar to the Balancer Segment, the Measurement Segment uses a variety of methods to market and sell its products. First, sales and marketing managersdirect the overall worldwide marketing efforts for surface measurement, laser and white light sensor and remote tank monitoring products. Second, both amarketing manager and a sales manager direct the overall worldwide marketing and sales efforts for distance measurement Page 10 and dimensional sizing products. Third, the Company uses distributors for international markets for the promotion and sale of surface measurement productsin China, Taiwan, Japan and Korea. The Xact product line utilizes two business development personnel, in addition to distributors for selected markets. AllMeasurement Segment products are assembled in the Portland, Oregon facility and shipped worldwide directly to customers.BacklogThe Company does not generally track backlog. Normally, orders are shipped within one to two weeks after receipt unless the customer requests otherwise.ManufacturingThere are no unique sources of supply or raw materials in any product lines. Essential electronic components, available in large quantities from varioussuppliers, are assembled into the Balancing and Measurement electronic control units under the Company’s quality and assembly standards. Company-owned software and firmware are coupled with the electronic components to provide the basis of the Company’s various electronic control units.Management believes several supply sources exist for all electronic components and assembly work incorporated into its electronic control systems.Mechanical parts for the Company’s products are produced by high quality machine shops. The Company is not dependent on any one supplier ofmechanical components. In the event of supply problems, the Company believes that two or three alternatives could be developed within 30 days. TheCompany is subject to availability and pricing on the various components parts purchased, which has had, and may continue to have, a material impact onoperations.The Company uses in-house skilled assemblers to construct and test vendor-supplied components. Component inventory of finished vendor-supplied parts isheld on Company property to assure adequate flow of parts to meet customer order requirements. Inventory is monitored by a computer control systemdesigned to assure timely re-ordering of components. In-house personnel assemble various products and test all finished components before placing them inthe finished goods inventory. Finished goods inventory is maintained via computer to assure timely shipment and service to customers. All customershipments are from the finished goods inventory.The Company’s Quality Control Program first received full ISO 9001 certification in 1996. In 2005, the Company received its certification to the newer ISO9001:2000 requirements and in 2011 and 2014 received its recertification.Proprietary TechnologyThe Company’s success depends in part on its proprietary technology, which the Company protects through patents, copyrights, trademarks, trade secrets andother measures. The Company has U.S. patents covering both Balancer and Measurement products, processes and methods that the Company believesprovide it with a competitive advantage. The Company has a policy of seeking patents where appropriate on inventions concerning new products andimprovements developed as part of its ongoing research, development and manufacturing activities. While patents provide certain legal rights ofenforceability, there can be no assurance the historic legal standards surrounding questions of validity and enforceability will continue to be applied or thatcurrent defenses with respect to issued patents will, in fact, be considered substantial in the future. There can be no assurance as to the degree and range ofprotection any patent will afford and whether patents will be issued or the extent to which the Company may inadvertently infringe upon patents granted toothers.The Company manufactures its Balancer Segment products under copyright protection in the U.S. for electronic board designs. Encapsulation of the finishedproduct further protects the Company’s technologies including software.The Company also relies upon trade secret protection for its confidential and proprietary information. There can be no assurance that others will notindependently develop substantially equivalent proprietary information and techniques or otherwise gain access to the Company’s trade secrets or disclosesuch technology or that the Company can meaningfully protect its trade secrets. Page 11 While the Company pursues patent, trademark, trade secret and copyright protection for products and various trademarks, it also relies on know-how andcontinuing technology advancement, manufacturing capabilities, affordable high-quality products, new product introduction and direct marketing efforts todevelop and maintain its competitive position.Product DevelopmentThe Company maintains an ongoing research and development program to expand the product lines and capabilities of its business segments. The goal ofthis program is to expand the product base in historic markets and to enter new market areas so as to reduce reliance on historic market segments. DuringFiscal 2015, 2014 and 2013, the Company’s research and development expense totaled $378,305, $475,430 and $573,461, respectively.EmployeesAs of July 31, 2015, the Company employed 56 individuals worldwide on a full-time basis. There was also one part-time employee. None of the Company’semployees are covered by a collective bargaining agreement. Item 1A.RISK FACTORSThe following are important factors that could cause actual results or events to differ materially from those contained in any forward-looking statements madeby or on behalf of the Company (see the forward-looking statements disclaimer at the beginning of Part 1, Item 1 in this Report). In addition, the risks anduncertainties described below are not the only ones that the Company faces. Unforeseen risks could arise and problems or issues that the Company now viewsas minor could become more significant. If the Company were unable to adequately respond to any risks, the Company’s business, financial condition orresults of operations could be materially adversely affected. In addition, the Company cannot be certain that any actions taken to reduce known or unknownrisks and uncertainties will be effective.General economic conditions and uncertainties may adversely affect the Company’s business, operating results and financial conditionThe Company’s operations and performance depend significantly on worldwide economic conditions, particularly in the industrial, manufacturing andautomotive sectors in the U.S., Asia and Europe, and their impact on levels of capital spending, which have deteriorated significantly in the past and maybecome depressed, or be subject to further deterioration. Economic factors that could adversely influence demand for the Company’s products includeuncertainty about global economic conditions leading to reduced levels of investment, reduction in demand for our customers’ products, customers’ andsuppliers’ access to credit and the stability of the global financial system, the overall health of our markets, unemployment and other macroeconomic factorsgenerally affecting commercial and industrial spending behavior.The past distress in the global financial markets and global economy has resulted in reduced liquidity and a tightening of credit markets. As a result of theseconditions, the Company could experience several potential adverse effects, including the inability of customers to obtain credit to finance purchases of theCompany’s products, the insolvency of customers resulting in reduced sales and bad debts, and the insolvency of key suppliers resulting in productdevelopment and production delays.The Company’s primary markets are volatile and unpredictableThe Company’s business depends on the demand for our various products in a variety of commercial and industrial markets. In the past, demand for ourproducts in these markets has fluctuated due to a variety of factors, some of which are beyond our control, including: general economic conditions, bothdomestically and internationally, the timing, number and size of orders from, and shipments to, our customers as well as the relative mix of those orders andvariations in the volume of orders for a particular product line in a particular quarter. Page 12 The Company’s efforts to continue to accelerate growth of the Xact Tank Monitoring System may not be successfulThe Xact Tank Monitoring System, which was introduced by the Company in 2009, measures the fill levels of tanks holding propane, diesel and other tank-based liquids and communicates that data via satellite to a secure web site. Although the initial acquisition and further development of the Xact product linehave negatively impacted operating results, the product line is adding sales and profits to the Company. The Company’s efforts to continue to accelerate thegrowth of Xact in its two primary markets of North America and Latin America may not be successful, anticipated market demand for the products may notmaterialize, and additional products or market opportunities may not be identified, developed and brought to market in a timely and cost-effective manner.All of this could continue to negatively impact future operating results and result in large and immediate write-offs of recorded intangible asset balances.New products may not be developed to satisfy changes in consumer demandsThe failure to develop new products or enhance existing products or react to changes in existing technologies could result in decreased revenues and a loss ofmarket share to competitors. Financial performance depends on the ability to design, develop, manufacture, assemble, test, market and support new productsand enhancements on a timely and cost-effective basis. New product opportunities may not be identified and developed and brought to market in a timelyand cost-effective manner. Products or technologies developed by other companies may render products or technologies obsolete or noncompetitive, or afundamental shift in technologies in the product markets could have a material adverse effect on the Company’s competitive position within historicindustries.Competition is intense and the Company’s failure to compete effectively would adversely affect its businessCompetition in the markets for the Company’s products is intense. The speed with which the Company can identify new applications for the Company’svarious technologies, develop products to meet those needs and supply commercial quantities at low prices to those new markets are important competitivefactors. The principal competitive factors in the Company’s markets are product features, performance, reliability and price. Many of the Company’scompetitors have greater financial, technical, engineering, production and marketing resources than we do. Those competitors with greater resources may, inaddition to other things, be able to better withstand periodic downturns, compete more effectively on the basis of price and technology, or more quicklydevelop enhancements to products that compete with the products we manufacture and market. New companies may enter the markets in which we compete,further increasing competition in those markets. No assurance can be given that the Company will be able to compete effectively in the future, and the failureto do so would have a material adverse effect on the Company’s business, financial condition and results of operations.The Company may experience increased pricing pressureWe have experienced and continue to experience pricing pressure in the sale of our products, from both competitors and customers. Pricing pressurestypically have become more intense during cyclical downturns when competitors seek to maintain or increase market share, reduce inventory or introducemore technologically advanced products or lower cost products. In addition, we may agree to pricing concessions or extended payment terms with ourcustomers in connection with volume orders or to reduce cost of ownership in highly competitive applications. Our business, financial condition, margins orresults of operations may be materially and adversely affected by competitive pressure and intense price-based competition.The Company may experience uncertainties resulting from conflict minerals regulationOn August 22, 2012, the SEC adopted a new rule requiring disclosures of specified minerals, known as conflict minerals, that are necessary to thefunctionality or production of products manufactured or contracted to be manufactured by companies filing public reports. The new rule requires a disclosurereport to be filed annually with the SEC and this report will require companies to perform due diligence, disclose and report whether such minerals originatefrom the Democratic Republic of Congo or an adjoining country. The new rule could affect Page 13 sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of our products. The number of supplierswho provide conflict-free minerals may be limited. In addition, there may be material costs associated with complying with the disclosure requirements, suchas costs related to determining the source of certain minerals used in our products as well as costs of possible changes to products, processes, or sources ofsupply as a consequence of such verification activities. Since our supply chain is complex, we may not be able to sufficiently verify the origins of therelevant minerals used in our products through the due diligence procedures that we implement, which may harm our reputation. In addition, we mayencounter challenges to satisfy those customers who require that all of the components of our products be certified as conflict-free, which could place us at acompetitive disadvantage if we are unable to do so.Production time and the overall cost of products could increase if any of the primary suppliers are lost or if a primary supplier increased the prices of rawmaterialsManufacturing operations depend upon obtaining adequate supplies of raw materials on a timely basis. The results of operations could be adversely affectedif adequate supplies of raw materials cannot be obtained in a timely manner or if the costs of raw materials increased significantly.The Company may not be able to ramp up manufacturing to satisfy increasing orders, which may lead to the loss of significant revenue opportunitiesThe Company manufactures several different product lines, all of which involve complicated technology and individual attention for each product made.The production time for each product can vary, depending on a variety of circumstances, including component availability, timing of delivery ofcomponents from suppliers and employee availability. Should the Company receive a large increase in orders, an increase in the size of orders or a shorteningof the required delivery time on existing orders, the Company may not be able to ramp up manufacturing to satisfy customer expectations, which may lead tothe loss of significant revenue opportunities.The Company maintains a significant investment in inventories in anticipation of future salesThe Company believes it maintains a competitive advantage by shipping product to its customers more rapidly than its competitors. As a result, theCompany has a significant investment in inventories. These inventories are recorded using the lower of cost or market method, which requires management tomake certain estimates. Management evaluates the recorded inventory values based on customer demand, market trends and expected future sales, andchanges these estimates accordingly. A significant shortfall of sales may result in carrying higher levels of inventories of finished goods and raw materialsthereby increasing the risk of inventory obsolescence and corresponding inventory write-downs. As a result, the Company may not carry adequate reserves tooffset such write-downs.The Company’s existing cash may not be sufficient and the Company may not be able to obtain financing to fund operations or future growthThe Company had a cash balance of $1.8 million as of May 31, 2015 and has no bank line of credit facility. The Company believes that its existing cash andinvestments combined with the cash from operating activities will be sufficient to meet its cash requirements for the near term. However, if sales weaken orthe Company needs to fund growth, and the Company is unable to reduce its operating costs in a timely manner or access additional financing throughcommercial loans or capital fund raising at terms acceptable to the Company and its shareholders, the liquidity or operations of the Company may besignificantly impacted.Fluctuations in quarterly and annual operating results make it difficult to predict future performanceQuarterly and annual operating results are likely to fluctuate in the future due to a variety of factors, some of which are beyond management’s control. As aresult of quarterly operating fluctuations, it is important to realize Page 14 quarter-to-quarter comparisons of operating results are not necessarily meaningful and should not be relied upon as indicators of future performance.The Company faces risks from international sales and currency fluctuationsThe Company markets and sells its products worldwide and international sales have accounted for and are expected to continue to account for a significantportion of future revenue. International sales are subject to a number of risks, including: the imposition of governmental controls; trade restrictions; difficultyin collecting receivables; changes in tariffs and taxes; difficulties in staffing and managing international operations; political and economic instability;general economic conditions; and fluctuations in foreign currencies. No assurances can be given that these factors will not have a material adverse effect onfuture international sales and operations and, consequently, on our business, financial condition and results of operations.The Company may experience a downturn due to the risks of operating a global businessSales to customers outside the U.S. accounted for 45.1% of total sales in Fiscal 2015. We expect that sales to customers outside the U.S. will continue torepresent a significant percentage of sales in the future. We currently have a sales and service office in Coventry, England and a sales office in Shanghai,China. We may need to increase our foreign operations in the future. Our international sales, purchases and operations are subject to risks inherent inconducting business abroad, many of which are outside of our control, including periodic local or geographical economic downturns, fluctuations in therelative values of currencies, difficulties in protecting intellectual property, shipping delays and disruptions, local labor disputes, unexpected changes intrading policies, regulatory requirements, tariffs and duties and difficulties in managing a global presence, including staffing, collecting accounts receivable,and managing distributors and sales representatives.The Company may not be able to reduce operating costs quickly enough if sales declineOperating expenses are generally fixed in nature and largely based on anticipated sales. However, should future sales decline significantly and rapidly, thereis no guarantee management could take actions that would further reduce operating expenses in either a timely manner or without seriously impacting theoperations of the Company.Future success depends in part on attracting and retaining key management and qualified technical and sales personnelFuture success depends on the efforts and continued services of key management, technical and sales personnel. Significant competition exists for suchpersonnel and there is no assurance key technical and sales personnel can be retained or that other highly qualified technical and sales personnel as requiredcan be attracted, assimilated and retained. There is also no guarantee that key employees will not leave and subsequently compete against the Company. Theinability to attract and retain key personnel could adversely impact the business, financial condition and results of operations.Changes in the effective tax rate may have an adverse effect on the Company’s results of operationsThe Company’s future effective tax rate may be adversely affected by a number of factors including: the jurisdictions in which profits are determined to beearned and taxed; the resolution of issues arising from future, potential tax audits with various tax authorities; changes in the valuation of our deferred taxassets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes; changesin available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretations of such tax laws and changes in generallyaccepted accounting principles. Page 15 Failure to protect intellectual property rights could adversely affect future performance and growthFailure to protect existing intellectual property rights may result in the loss of valuable technologies or paying other companies for infringing on theirintellectual property rights. The Company relies on patent, trade secret, trademark and copyright law to protect such technologies. There is no assurance anyof the Company’s U.S. patents will not be invalidated, circumvented, challenged or licensed to other companies.Changes in securities laws and regulations have increased and could continue to increase Company expensesChanges in the laws and regulations affecting public companies, including the provisions of the Sarbanes-Oxley Act of 2002 and rules promulgated by theSecurities and Exchange Commission, have increased and may continue to increase Company expenses as the Company devotes resources to ensurecompliance with all applicable laws and regulations. In addition, the NASDAQ Capital Market, on which the Company’s common stock is listed, has alsoadopted comprehensive rules and regulations relating to corporate governance. These laws, rules and regulations have increased the scope, complexity andcost of corporate governance, reporting and disclosure practices. The Company may be required to hire additional personnel and use outside legal,accounting and advisory services to address these laws, rules and regulations. The Company also expects these developments to make it more difficult andmore expensive for the Company to obtain director and officer liability insurance in the future, and the Company may be required to accept reduced coverageor incur substantially higher costs to obtain coverage. Further, the Company’s board members, Chief Executive Officer and Chief Financial Officer could facean increased risk of personal liability in connection with the performance of their duties. As a result, we may have difficulty attracting and retaining qualifiedboard members and executive officers, which would adversely affect the Company. Item 1B.Unresolved Staff CommentsNone. Item 2.PropertiesThe Company’s design and assembly facilities and executive offices are located in Portland, Oregon in three company-owned buildings totalingapproximately 40,500 square feet. SEL occupies a 1,080-square foot facility in Coventry, England pursuant to a three-year lease, renewable for an additionalthree-year period. In March 2014, the Company exercised the lease renewal. The current basic monthly rent amount is £1,002 ($1,531 as of May 31, 2015)and the lease will expire in March 2017. Item 3.Legal ProceedingsThere are no material legal proceedings currently pending against the Company. Item 4.Mine Safety DisclosuresNone. Page 16 PART II Item 5.Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity SecuritiesThe Company’s Common Stock is traded on the NASDAQ Capital Market under the symbol “SMIT.”The following tables set forth the high and low closing prices of the Company’s Common Stock as reported on the NASDAQ Capital Market for the periodsindicated. Year Ended May 31, 2014 High Low First Quarter $3.05 $2.51 Second Quarter $2.70 $2.44 Third Quarter $2.70 $2.51 Fourth Quarter $3.03 $2.65 Year Ended May 31, 2015 High Low First Quarter $3.06 $2.65 Second Quarter $3.20 $2.70 Third Quarter $2.99 $2.65 Fourth Quarter $2.80 $2.62 As of July 31, 2015, there were 2,995,910 shares of Common Stock outstanding held by approximately 71 holders of record. The number of holders does notinclude individual participants in security position listings; the Company believes that there are more than 900 individual holders of shares of CommonStock.The Company has not paid any dividends on its Common Stock since 1994. The Company’s current policy is to retain earnings to finance the Company’sbusiness. Future dividends will be dependent upon the Company’s financial condition, results of operations, current and anticipated cash requirements,acquisition plans and plans for expansion and any other factors that the Company’s Board of Directors deems relevant. The Company has no presentintention of paying dividends on its Common Stock in the foreseeable future.This table shows information about equity awards under the Company’s equity compensation plans at May 31, 2015: Plan Category Number of Securities tobe issued upon exercise ofoutstanding options Weighted-averageexercise price ofoutstanding options Number of Securities remaining availablefor future issuance under equitycompensation plans (excluding securitiesin column a) (a) (b) (c) Equity compensation plans approved bysecurity holders 332,500 $3.68 212,500 Equity compensation plans notapproved by security holders 0 0 0 332,500 $3.68 212,500 Recent Sales of Unregistered SecuritiesNone.Issuer Purchases of Equity SecuritiesNone. Page 17 Item 6.Selected Financial DataIn thousands, except per share information Year Ended 5/31/2015 5/31/2014 5/31/2013 5/31/2012 5/31/2011 Net sales $13,069 $12,135 $12,452 $14,437 $11,493 Net income (loss) $(94) $(540) $(540) $77 $(205) Net income (loss) per common share, basic $(0.03) $(0.18) $(0.18) $0.03 $(0.07) Weighted average number of common shares, basic 2,996 2,996 2,991 2,930 2,895 Net income (loss) per common share, diluted $(0.03) $(0.18) $(0.18) $0.03 $(0.07) Weighted average number of common shares, diluted 2,996 2,996 2,991 2,944 2,895 Stockholders’ equity $9,489 $9,613 $10,015 $10,484 $10,157 Total assets $11,104 $10,824 $11,625 $12,026 $11,589 Long-term debt (including current portion) $0 $0 $0 $0 $0 Item 7.Management’s Discussion and Analysis of Financial Condition and Results of OperationsRESULTS OF OPERATIONSOverviewSchmitt Industries, Inc. (the Company), an Oregon corporation, designs, manufactures and sells high precision test and measurement products for two mainbusiness segments: the Balancer segment and the Measurement segment. For the Balancer segment, the Company designs, manufactures and sells computer-controlled vibration detection, balancing and process control systems for the worldwide machine tool industry, particularly for grinding machines. Throughits wholly owned subsidiary, Schmitt Measurement Systems, Inc., an Oregon corporation, the Company designs, manufactures and sells laser and white lightsensors for distance, dimensional and area measurement for a wide variety of commercial applications, laser-based microroughness measurement products forthe semiconductor wafer and hard disk drive industries and for other industrial applications, laser-based surface analysis and measurement products for avariety of scientific applications, and ultrasonic measurement products that accurately measure the fill levels of tanks holding propane, diesel and other tank-based liquids and transmit that data via satellite to a secure web site for display (the Measurement segment). The Company also provides sales and service forEurope and Asia through its wholly owned subsidiary, Schmitt Europe Limited (SEL), located in Coventry, England and through its sales representativeoffice located in Shanghai, China.For the fiscal year ended May 31, 2015 (Fiscal 2015), total sales increased $934,585, or 7.7%, to $13,069,091 from $12,134,506 in the fiscal year endedMay 31, 2014 (Fiscal 2014). Balancer segment sales focus throughout the world on end-users, rebuilders and original equipment manufacturers of grindingmachines with the target geographic markets of North America, Asia, and Europe. Balancer sales increased $129,025, or 1.7%, to $7,850,236 in Fiscal 2015compared to $7,721,211 in Fiscal 2014. Sales into Asia, Germany and other European countries increased $712,846, or 23.8%, for Fiscal 2015 as compared toFiscal 2014. These sales were offset by lower volumes of shipments into North America and other regions of the world. The Measurement segment productlines consist of SMS and Lasercheck laser-based surface microroughness measurement systems, Acuity laser-based distance measurement and dimensionalsizing laser sensors, and Xact ultrasonic-based remote tank monitoring products. Total Measurement segment sales increased $805,560, or 18.3%, to$5,218,855 for the year ended May 31, 2015 as compared to $4,413,295 for the year ended May 31, 2014. The increase is primarily increased revenuesassociated with the sales of Xact remote tank monitoring products and related monitoring services and an increase in sales of SMS laser-based surfacemeasurement products.Operating expenses increased $66,605, or 1.1%, to $6,205,156 in Fiscal 2015 from $6,138,551 in Fiscal 2014. General, administrative and sales expensesincreased $163,730, or 2.9%, in Fiscal 2015 to $5,826,851 as compared to $5,663,121 in the prior fiscal year. Research and development expenses decreased$97,125, or 20.4%, to $378,305 in Fiscal 2015 from $475,430 in Fiscal 2014. Page 18 Net loss was $93,669, or $0.03 per fully diluted share, for the year ended May 31, 2015 as compared to net loss of $539,624, or $0.18 per fully diluted share,for the year ended May 31, 2014.Critical Accounting PoliciesRevenue Recognition – The Company recognizes revenue for sales and billing for freight charges upon delivery of the product to the customer at a fixed ordeterminable price with a reasonable assurance of collection, passage of title to the customer as indicated by shipping terms and fulfillment of all significantobligations, pursuant to the guidance provided by Accounting Standards Codification Topic 605. For sales to all customers, including manufacturerrepresentatives, distributors or their third-party customers, these criteria are met at the time product is shipped. When other significant obligations remainafter products are delivered, revenue is recognized only after such obligations are fulfilled. In addition, judgments are required in evaluating the creditworthiness of our customers. Credit is not extended to customers and revenue is not recognized until we have determined that collectability is reasonablyassured. The Company estimates customer product returns based on historical return patterns and reduces sales and cost of sales accordingly.Allowance for Doubtful Accounts – The Company maintains credit limits for all customers based upon several factors, including but not limited to financialcondition and stability, payment history, published credit reports and use of credit references. Management performs various analyses to evaluate accountsreceivable balances to ensure recorded amounts reflect estimated net realizable value. This review includes accounts receivable agings, other operating trendsand relevant business conditions, including general economic factors, as they relate to the Company’s domestic and international customers. If these analyseslead management to the conclusion that potential significant accounts are uncollectible, a reserve is provided.Inventories – Inventories are valued at the lower of cost or market with cost determined on the average cost basis. Costs included in inventories consist ofmaterials, labor and manufacturing overhead, which are related to the purchase or production of inventories. Write-downs, when required, are made to reduceexcess inventories to their net realizable values. Such estimates are based on assumptions regarding future demand and market conditions. If actualconditions become less favorable than the assumptions used, an additional inventory write-down may be required.Deferred Taxes – The Company applies the asset and liability method in recording income taxes, under which deferred income tax assets and liabilities aredetermined, based on the differences between the financial reporting and tax bases of assets and liabilities and are measured using currently enacted tax ratesand laws. Additionally, deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of thedeferred tax asset will not be realized. Management continues to review the level of the valuation allowance on a quarterly basis. There can be no assurancethat the Company’s future operations will produce sufficient earnings so that the deferred tax assets can be fully utilized.Intangible Assets – Intangible and other long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate the carryingamount of the asset may not be recoverable. Recoverability is determined by comparing the forecasted future undiscounted net cash flows from theoperations to which the assets relate, based on management’s best estimates using the appropriate assumptions and projections at the time, to the carryingamount of the assets. If the carrying value is determined to be in excess of future operating cash flows, the asset is considered impaired and a loss isrecognized equal to the amount by which the carrying amount exceeds the estimated fair value of the assets. Page 19 Recently issued accounting pronouncementsRefer to Note 2 of the Notes to Consolidated Financial Statements for a discussion of recently issued accounting pronouncements.Discussion of Operating Results Year Ended May 31, 2015 2014 2013 Balancer sales $7,850,236 60.1% $7,721,211 63.6% $7,714,122 61.9% Measurement sales 5,218,855 39.9% 4,413,295 36.4% 4,738,130 38.1% Total sales 13,069,091 100.0% 12,134,506 100.0% 12,452,252 100.0% Cost of sales 6,928,394 53.0% 6,508,360 53.6% 6,357,452 51.1% Gross profit 6,140,697 47.0% 5,626,146 46.4% 6,094,800 48.9% Operating expenses: General, administration and sales 5,826,851 44.6% 5,663,121 46.7% 6,083,611 48.9% Research and development 378,305 2.9% 475,430 3.9% 573,461 4.6% Total operating expenses 6,205,156 47.5% 6,138,551 50.6% 6,657,072 53.5% Operating loss (64,459) (0.5%) (512,405) (4.2%) (562,272) (4.5%) Other income (expense) (19,123) (0.1%) (17,887) (0.1%) 14,106 0.1% Loss before income taxes (83,582) (0.6%) (530,292) (4.4%) (548,166) (4.4%) Provision (benefit) for income taxes 10,087 0.1% 9,332 0.1% (8,284) (0.1%) Net loss $(93,669) (0.7%) $(539,624) (4.4%) $(539,882) (4.3%) Sales – Sales in the Balancer segment increased $129,025, or 1.7%, to $7,850,236 for Fiscal 2015 compared to $7,721,211 for Fiscal 2014. This increase wasprimarily attributed to stronger sales in Asia and other regions of the world, offset by lower shipments into North America and Europe. Sales into Asiaincreased $574,923, or 24.0%, and sales into other regions of the world increased $126,352, or 117.0%, during Fiscal 2015 as compared to Fiscal 2014. NorthAmerican sales decreased $530,905, or 13.0%, in Fiscal 2015 compared to Fiscal 2014. While sales into Europe decreased $41,345, or 3.7%, in Fiscal 2015compared to Fiscal 2014, sales into Germany and other European countries increased $137,923, or 18.9% in Fiscal 2015 compared to the prior year. Theincreases in sales into Asia and other regions of the world were due to an increase in demand for the Company’s SBS products, while the increase in sales intoGermany and other European countries is in response to the targeted market strategy we have in those areas. The decline in sales in North America reflectedfluctuations in demand in the markets we serve. The levels of demand for our Balancer products in any of these geographic markets cannot be forecasted withany certainty given current economic trends and the historical volatility experienced in this market.Sales in the Measurement segment increased $805,560, or 18.3%, to $5,218,855 in Fiscal 2015 compared to $4,413,295 in Fiscal 2014. Sales of Acuity laser-based distance measurement and dimensional-sizing products decreased $499,937, or 20.1%, primarily due to a reduction in the markets we serve. Sales ofXact remote tank monitoring products increased $723,595, or 74.4%, to $1,695,939 during Fiscal 2015 due to an increase in product shipments andincreasing monitoring revenues associated with unit sales. Sales of SMS and Lasercheck laser-based surface measurement products increased $581,902, or61.3%, primarily due to an increase in demand for these products. Future sales of laser-based or ultrasonic measurement products cannot be forecasted withany certainty given the historical volatility experienced in this market.Sales in the Balancer segment increased $7,089, or 0.1%, to $7,721,211 for Fiscal 2014 compared to $7,714,122 for Fiscal 2013. This increase was primarilydue to increased sales into Europe and Asia, offset by lower Page 20 shipments into North America and other regions of the world. Sales into Europe increased $199,287, or 21.5%, in Fiscal 2014 compared to Fiscal 2013. Salesinto Asia increased $145,137, or 6.4%, in Fiscal 2014 compared to the prior year. North American sales decreased $218,349, or 5.1%, in Fiscal 2014compared to Fiscal 2013. Sales in other regions of the world decreased $118,986, or 52.4%, during Fiscal 2014 as compared to the prior year. The increases insales in Europe and Asia were due to a gradual increase in demand for the Company’s SBS products, while the decline in sales in North America and otherregions of the world reflected fluctuations in demand due to uncertainties about the pace of economic recovery in the markets we serve. The levels of demandfor our Balancer products in any of these geographic markets cannot be forecasted with any certainty given current economic trends and the historicalvolatility experienced in this market.Sales in the Measurement segment decreased $324,835, or 6.9%, to $4,413,295 in Fiscal 2014 compared to $4,738,130 in Fiscal 2013. Sales of Acuity laser-based distance measurement and dimensional-sizing products decreased $626,701, or 20.1%, primarily due to a reduction in orders as the uncertainty andinconsistency in the U.S. economic recovery continues to have a negative impact in the markets we serve. Sales of SMS and Lasercheck laser-based surfacemeasurement products increased $206,175, or 27.7%, primarily due to an increase in demand for these products. Sales of Xact remote tank monitoringproducts increased $95,691 to $972,344 during Fiscal 2014 due to the higher volume of shipments and the developing monitoring revenues associated withunit sales. Future sales of laser- based or ultrasonic measurement products cannot be forecasted with any certainty given the historical volatility experiencedin this market.Gross margin – Gross margin in Fiscal 2015 increased to 47.0% compared to 46.4% in Fiscal 2014. The variance in gross margin was primarily due to shiftsin the product sales mix involving our five product lines. Gross margin in Fiscal 2014 decreased to 46.4% compared to 48.9% in Fiscal 2013. The variance ingross margin was primarily due to shifts in the product sales mix involving our five product lines and the impact of increased costs associated with theproducts sold.Operating expenses – Operating expenses increased $66,605, or 1.1%, to $6,205,156 for Fiscal 2015 compared to $6,138,551 for Fiscal 2014. General,administrative and sales expenses increased $163,730, or 2.9%, to $5,826,851 in Fiscal 2015 compared to $5,663,121 in the prior year. Increases in personnelcosts and commissions expense were offset by decreases in professional fees, depreciation expense and other general office expenses. Research anddevelopment expenses decreased $97,125, or 20.4%, to $378,305 in Fiscal 2015 compared to $475,430 in Fiscal 2014. The decrease in research anddevelopment expense was primarily due to the timing of completion of some of the development projects occurring within our existing product lines, withnew projects starting during the fourth quarter of Fiscal 2015.Operating expenses decreased $518,521, or 7.8%, to $6,138,551 for Fiscal 2014 compared to $6,657,072 in Fiscal 2013. General, administrative and salesexpenses decreased $420,490, or 6.9%, to $5,663,121 in Fiscal 2014 compared to $6,083,611 in the prior year. This decrease was the result of lower sales andmarketing and travel and entertainment expenses. Research and development expenses decreased $98,031, or 17.1%, to $475,430 in Fiscal 2014 compared to$573,461 in Fiscal 2013. The decrease in research and development expense was primarily due to the completion of some of the development projects withinour existing product lines.Other income (expense) – Other income (expense) consists of interest income, interest expense, foreign currency exchange gain (loss) and other income(expense). Interest income was $191, $1,558 and $1,226 in Fiscal 2015, 2014 and 2013, respectively. Fluctuations in interest income are impacted by thelevels of our average cash and investment balances and changes in interest rates. Interest expense was $3,452, $9,158, and $0 in Fiscal 2015, 2014 and 2013,respectively. Fiscal 2015 interest expense is related to the capital lease of a piece of manufacturing equipment. Fiscal 2014 interest expense was related to theinterest charges on the outstanding balances on our line of credit. Foreign currency exchange loss was $33,411 and $23,375 in Fiscal 2015 and 2014,respectively. Foreign currency exchange gain was $12,884 in Fiscal 2013. The foreign currency exchange gain (loss) fluctuated with the strength of foreigncurrencies against the U.S. dollar during the respective periods. In Page 21 Fiscal 2015 and 2014, other income included gains in the amounts of $17,500 and $13,667, respectively, which were the result of sales of certain fixed assets.Income tax provision – The effective tax rate in Fiscal 2015 was 12.1%. The effective tax rate on consolidated net loss in Fiscal 2015 differed from thefederal statutory tax rate primarily due to changes in the deferred tax valuation allowance and certain expenses not being deductible for income tax reporting,offset by tax credits related to research and experimentation expenses. The effective tax rate in Fiscal 2014 was 1.8%. The effective tax rate on consolidatednet loss in Fiscal 2014 differed from the federal statutory tax rate primarily due to changes in the deferred tax valuation allowance and certain expenses notbeing deductible for income tax reporting, offset by tax credits related to research and experimentation expenses. The effective tax rate in Fiscal 2013 was(1.5)%. The effective tax rate on consolidated net loss in Fiscal 2013 differed from the federal statutory tax rate primarily due to changes in the deferred taxvaluation allowance and certain expenses not being deductible for income tax reporting offset by tax credits related to research and experimentationexpenses.Net income (loss) – Net loss decreased $445,955 to a net loss of $93,669, or $0.03 per diluted share, for Fiscal 2015 as compared to net loss of $539,624, or$0.18 per diluted share, for Fiscal 2014. Net loss for Fiscal 2015 reflected increased sales and a higher gross margin percentage, which was partially offset byan increase in operating expenses. Net loss decreased $258 to a net loss of $539,624, or $0.18 per diluted share, for Fiscal 2014 as compared to net loss of$539,882, or $0.18 per diluted share, for Fiscal 2013. Net loss for Fiscal 2014 reflected decreased sales and a lower gross margin percentage, which waspartially offset by reduced operating expenses.Inflation RiskThe Company does not believe that inflation has had a material effect on its business, financial condition or results of operations. However, if its costs were tobecome subject to significant inflationary pressures, the Company may not be able to fully offset such higher costs through price increases. The Company’sinability or failure to do so could harm its business, financial condition and results of operations.Off Balance Sheet ArrangementsThe Company did not have any off-balance sheet arrangements during the fiscal year ended May 31, 2015.LIQUIDITY AND CAPITAL RESOURCESThe Company’s working capital increased $75,242 to $7,553,315 as of May 31, 2015 compared to $7,478,073 as of May 31, 2014. Cash and cashequivalents increased $285,089 from $1,510,565 as of May 31, 2014 to $1,795,654 as of May 31, 2015.Cash provided by operating activities was $390,146 in Fiscal 2015 as compared to cash used in operations of $392,376 in Fiscal 2014. The increase in theamount of cash used for operating activities was primarily due to the reduction in net loss incurred by the Company, reductions in inventories, and increasesin accounts payable and accrued liabilities, offset by the increase in accounts receivable.At May 31, 2015, accounts receivable increased $425,232 to $2,660,426 compared to $2,235,194 as of May 31, 2014. The increase in accounts receivablewas due to the increase in sales in the fourth quarter and the resulting timing of receipts. Inventories decreased $232,255 to $4,557,567 as of May 31, 2015compared to $4,789,822 as of May 31, 2014 as a result of our continued focus on right-sizing the levels of inventories held for each of the Company’sproduct lines. At May 31, 2015, total current liabilities increased $404,247 to $1,615,331 as compared to $1,211,084 at May 31, 2014. The increase wasprimarily due to the timing of payments on accounts payable and increases in accruals for commissions resulting from the increase in fourth quarter sales.During the year ended May 31, 2014, net cash used in investing activities was $49,127, which primarily consisted of additions to property and equipment ofa new vehicle and new manufacturing and computer equipment, offset by the disposition of one of the Company’s vehicles.The Company had a $2 million bank line of credit secured by U.S. accounts receivable, inventories, general intangibles, and a depository account. The lineof credit was subject to certain covenant requirements if draws on Page 22 the line were executed. Interest was payable at the bank’s prime rate or LIBOR plus 2.0%. The term on the line of credit expired September 1, 2014, and theCompany chose not to renew the line. There were no outstanding balances on the line of credit at May 31, 2015 and 2014.We believe that our existing cash and investments combined with the cash we anticipate to generate from operating activities and financing available fromother sources will be sufficient to meet our cash requirements for the foreseeable future. We do not have any significant commitments nor are we aware of anysignificant events or conditions that are likely to have a material impact on our liquidity or capital resources.QUARTERLY FINANCIAL DATAIn thousands, except per share information (unaudited) 2015 Quarter Ended August31 November30 February28 May31 Sales $3,049 $3,152 $3,011 $3,858 Gross profit $1,464 $1,554 $1,350 $1,773 Net income (loss) $52 $(70) $(168) $93 Net income (loss) per share, basic $0.02 $(0.02) $(0.06) $0.03 Net income (loss) per share, diluted $0.02 $(0.02) $(0.06) $0.03 2014 Quarter Ended August31 November30 February28 May31 Sales $2,899 $3,143 $3,066 $3,026 Gross profit $1,331 $1,468 $1,458 $1,369 Net loss $(147) $(163) $(72) $(158) Net loss per share, basic $(0.05) $(0.05) $(0.02) $(0.05) Net loss per share, diluted $(0.05) $(0.05) $(0.02) $(0.05) Item 7A.Quantitative and Qualitative Disclosures about Market RiskInterest Rate RiskThe Company did not have any derivative financial instruments as of May 31, 2015. However, the Company could be exposed to interest rate risk at any timein the future and, therefore, employs established policies and procedures to manage its exposure to changes in the market risk of its cash equivalents.The Company’s interest income and expense are most sensitive to changes in the general level of U.S. interest rates. In this regard, changes in the U.S. interestrates affect the interest earned on the Company’s interest bearing cash equivalents and short term investments. During Fiscal 2015, the Company allowed itsvariable rate line of credit facility with a bank to expire, and as such there was no outstanding balance as of May 31, 2015. Also, there is no other long-termobligation whose interest rates are based on variable rates that may fluctuate over time based on economic changes in the environment. Therefore, at thistime, the Company is not subject to interest rate risk on outstanding interest bearing obligations if market interest rates fluctuate and does not expect anychange in the interest rates to have a material effect on the Company’s results from operations.Foreign Currency RiskThe Company markets and sells its products worldwide and international sales have accounted for and are expected to continue to account for a significantportion of future revenue. The Company operates a subsidiary in the United Kingdom and acquires certain materials and services from vendors transacted inforeign currencies. Therefore, the Company’s business and financial condition is sensitive to currency exchange rates or any other restrictions imposed ontheir currencies. For Fiscal 2015, 2014 and 2013, results of operations included gains (losses) on foreign currency translation of $(33,411), $(23,375) and$12,884, respectively. The foreign exchange gains or losses in Fiscal 2015, 2014 and 2013 are primarily attributable to Company’s United Kingdomsubsidiary, Schmitt Europe, Ltd. Page 23 Item 8.Financial Statements and Supplementary DataSCHMITT INDUSTRIES, INC.CONSOLIDATED BALANCE SHEETS May 31, 2015 May 31, 2014 ASSETS Current assets Cash and cash equivalents $1,795,654 $1,510,565 Accounts receivable, net 2,660,426 2,235,194 Inventories 4,557,567 4,789,822 Prepaid expenses 153,970 152,237 Income taxes receivable 1,029 1,339 9,168,646 8,689,157 Property and equipment, net 1,110,878 1,191,591 Other assets Intangible assets, net 824,411 943,643 TOTAL ASSETS $11,103,935 $10,824,391 LIABILITIES & STOCKHOLDERS’ EQUITY Current liabilities Accounts payable $834,002 $512,219 Accrued commissions 284,944 204,772 Accrued payroll liabilities 140,872 127,035 Other accrued liabilities 355,513 366,848 Income taxes payable 0 210 Total current liabilities 1,615,331 1,211,084 Commitments and contingencies (Note 5) Stockholders’ equity Common stock, no par value, 20,000,000 shares authorized, 2,995,910 shares issued and outstanding at May 31,2015 and May 31, 2014 10,511,324 10,438,750 Accumulated other comprehensive loss (366,945) (263,337) Accumulated deficit (655,775) (562,106) Total stockholders’ equity 9,488,604 9,613,307 TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY $11,103,935 $10,824,391 The accompanying notes are an integral part of these consolidated financial statements. Page 24 SCHMITT INDUSTRIES, INC.CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS Year Ended May 31, 2015 2014 2013 Net sales $13,069,091 $12,134,506 $12,452,252 Cost of sales 6,928,394 6,508,360 6,357,452 Gross profit 6,140,697 5,626,146 6,094,800 Operating expenses: General, administration and sales 5,826,851 5,663,121 6,083,611 Research and development 378,305 475,430 573,461 Total operating expenses 6,205,156 6,138,551 6,657,072 Operating loss (64,459) (512,405) (562,272) Other income (expense) (19,123) (17,887) 14,106 Loss before income taxes (83,582) (530,292) (548,166) Provision (benefit) for income taxes 10,087 9,332 (8,284) Net loss $(93,669) $(539,624) $(539,882) Net loss per common share, basic $(0.03) $(0.18) $(0.18) Weighted average number of common shares, basic 2,995,910 2,995,910 2,990,910 Net loss per common share, diluted $(0.03) $(0.18) $(0.18) Weighted average number of common shares, diluted 2,995,910 2,995,910 2,990,910 Comprehensive loss Net loss $(93,669) $(539,624) $(539,882) Foreign currency translation adjustment (103,608) 68,587 (18,629) Total comprehensive loss $(197,277) $(471,037) $(558,511) The accompanying notes are an integral part of these consolidated financial statements. Page 25 SCHMITT INDUSTRIES, INC.CONSOLIDATED STATEMENTS OF CASH FLOWS Year Ended May 31, 2015 2014 2013 Cash flows relating to operating activities Net loss $(93,669) $(539,624) $(539,882) Adjustments to reconcile net loss to net cash provided by (used in) operating activities: Depreciation and amortization 266,572 328,293 347,715 (Gain) loss on disposal of property and equipment (17,500) (13,667) 0 Stock based compensation 72,574 57,726 89,888 (Increase) decrease in: Accounts receivable (455,905) (224,309) 510,531 Inventories 205,399 292,594 (1,082,931) Prepaid expenses (3,701) 69,201 (33,509) Income taxes receivable 310 46,756 (40,315) Increase (decrease) in: Accounts payable 326,899 (411,954) 149,574 Accrued liabilities and customer deposits 89,377 2,398 (80,183) Income taxes payable (210) 210 0 Net cash provided by (used in) operating activities 390,146 (392,376) (679,112) Cash flows relating to investing activities Purchase of property and equipment (66,627) (56,192) (175,835) Proceeds from sale of property and equipment 17,500 19,500 0 Decrease (increase) in other long term assets 0 0 291 Net cash used in investing activities (49,127) (36,692) (175,544) Cash flows relating to financing activities Common stock issued on exercise of stock options 0 11,500 0 Increase in line of credit 0 400,000 0 Payments on line of credit 0 (400,000) 0 Net cash provided by financing activities 0 11,500 0 Effect of foreign exchange translation on cash (55,930) 19,062 (13,090) Increase (decrease) in cash and cash equivalents 285,089 (398,506) (867,746) Cash and cash equivalents, beginning of year 1,510,565 1,909,071 2,776,817 Cash and cash equivalents, end of year $1,795,654 $1,510,565 $1,909,071 Supplemental disclosure of cash flow information Cash paid during the year for income taxes $9,978 $8,989 $39,635 Cash paid during the year for interest $3,452 $9,159 $0 The accompanying notes are an integral part of these consolidated financial statements. Page 26 SCHMITT INDUSTRIES, INC.CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY Shares Amount Accumulatedothercomprehensiveloss Retainedearnings Total Balance, May 31, 2012 2,990,910 $10,279,636 $(313,295) $517,400 $10,483,741 Stock based compensation 0 89,888 0 0 89,888 Net loss 0 0 0 (539,882) (539,882) Other comprehensive loss 0 0 (18,629) 0 (18,629) Balance, May 31, 2013 2,990,910 10,369,524 (331,924) (22,482) 10,015,118 Stock options exercised net of related tax benefit of $0 5,000 11,500 0 0 11,500 Stock based compensation 0 57,726 0 0 57,726 Net loss 0 0 0 (539,624) (539,624) Other comprehensive income 0 0 68,587 0 68,587 Balance, May 31, 2014 2,995,910 10,438,750 (263,337) (562,106) 9,613,307 Stock based compensation 0 72,574 0 0 72,574 Net loss 0 0 0 (93,669) (93,669) Other comprehensive loss 0 0 (103,608) 0 (103,608) Balance, May 31, 2015 2,995,910 $10,511,324 $(366,945) $(655,775) $9,488,604 The accompanying notes are an integral part of these consolidated statements. Page 27 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013NOTE 1THE COMPANYSchmitt Industries, Inc. (the “Company”) designs, manufactures, and sells high precision test and measurement products for two main business segments: theBalancer Segment and the Measurement Segment. The Company designs, manufactures, and sells computer-controlled vibration detection, balancing andprocess control systems for the worldwide machine tool industry, particularly for grinding machines (the “Balancer Segment”). Through its wholly ownedsubsidiary, Schmitt Measurement Systems, Inc., the Company designs, manufactures and sells laser and white light sensors for distance, dimensional and areameasurement products for a variety of commercial, industrial and scientific applications, and ultrasonic measurement products that accurately measure the filllevels of tanks holding propane, diesel and other tank-based liquids and transmit that data via satellite to a secure web site for display (the “MeasurementSegment”).NOTE 2SIGNIFICANT ACCOUNTING POLICIESPrinciples of ConsolidationThese consolidated financial statements include those of the Company and its wholly owned subsidiaries: Schmitt Measurement Systems, Inc. (“SMS”),Schmitt Europe, Ltd. (“SEL”) and Schmitt Industries (Canada) Limited. All significant intercompany accounts and transactions have been eliminated in thepreparation of the consolidated financial statements.Revenue RecognitionThe Company recognizes revenue for sales and billing for freight charges upon delivery of the product to the customer at a fixed and determinable price witha reasonable assurance of collection, passage of title to the customer as indicated by shipping terms and fulfillment of all significant obligations, pursuant tothe guidance provided by Accounting Standards Codification (“ASC”) Topic 605. For sales to all customers, including manufacturer representatives,distributors or their third-party customers, these criteria are met at the time product is shipped. When other significant obligations remain after products aredelivered, revenue is recognized only after such obligations are fulfilled. In addition, judgments are required in evaluating the credit worthiness of ourcustomers. Credit is not extended to customers and revenue is not recognized until we have determined that collectability is reasonably assured. TheCompany estimates customer product returns based on historical return patterns and reduces sales and cost of sales accordingly.Cash EquivalentsThe Company generally invests excess cash in money market funds and investment grade highly liquid securities. The Company considers securities that arehighly liquid, readily convertible into cash and have original maturities of less than three months when purchased to be cash equivalents. The Company’scash consists of demand deposits in large financial institutions. At times, balances may exceed federally insured limits.Accounts ReceivableThe Company maintains credit limits for all customers based upon several factors, including but not limited to financial condition and stability, paymenthistory, published credit reports and use of credit references. Management performs various analyses to evaluate accounts receivable balances to ensurerecorded amounts reflect estimated net realizable value. This review includes using accounts receivable agings, other operating trends and relevant businessconditions, including general economic factors, as they relate to each of the Page 28 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Company’s domestic and international customers. If these analyses lead management to the conclusion that potential significant accounts are uncollectible, areserve is provided. The allowance for doubtful accounts was $56,370 and $63,297 as of May 31, 2015 and 2014, respectively.InventoriesInventories are valued at the lower of cost or market with cost determined on the average cost basis. Costs included in inventories consist of materials, laborand manufacturing overhead, which are related to the purchase or production of inventories. Write-downs, when required, are made to reduce excessinventories to their net realizable values. Such estimates are based on assumptions regarding future demand and market conditions. If actual conditionsbecome less favorable than the assumptions used, an additional inventory write-down may be required. As of May 31 inventories consisted of: 2015 2014 Raw materials $1,845,037 $1,888,985 Work-in-process 836,346 994,009 Finished goods 1,876,184 1,906,828 $4,557,567 $4,789,822 Property and EquipmentProperty and equipment are stated at cost. Depreciation is computed using the straight-line method over estimated useful lives of three to seven years forfurniture, fixtures, and equipment; three years for vehicles; and twenty-five years for buildings and improvements. Expenditures for maintenance and repairsare charged to expense as incurred. As of May 31 property and equipment consisted of: 2015 2014 Land $299,000 $299,000 Buildings and improvements 1,814,524 1,805,951 Furniture, fixtures and equipment 1,381,691 1,370,131 Vehicles 96,587 86,838 3,591,802 3,561,920 Less accumulated depreciation (2,480,924) (2,370,329) $1,110,878 $1,191,591 Page 29 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Intangible AssetsAmortizable intangible assets, which include purchased technology and patents, are amortized over their estimated useful lives ranging from five toseventeen years. As of May 31, 2015 and 2014, amortizable intangible assets were $2,200,883, and accumulated amortization was $1,376,472 and$1,257,240, respectively. Amortization expense for each of the following years ending May 31 is expected to be as follows: Year ending May 31, 2016 $111,531 2017 111,530 2018 104,583 2019 104,583 2020 104,583 Thereafter 287,601 $824,411 Intangible and other long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate the carrying amount of the assetmay not be recoverable. Recoverability is determined by comparing the forecasted future undiscounted cash flows from the operations to which the assetsrelate, based on management’s best estimates using the appropriate assumptions and projections at the time, to the carrying amount of the assets. If thecarrying value is determined to be in excess of future operating cash flows, the asset is considered impaired and a loss is recognized equal to the amount bywhich the carrying amount exceeds the estimated fair value of the assets. As of May 31, 2015 and 2014, no impairment existed.Foreign CurrencyFinancial statements for the Company’s subsidiaries outside the United States are translated into U.S. dollars at year-end exchange rates for assets andliabilities and weighted average exchange rates for income and expenses. The resulting translation adjustments are included as a separate component ofstockholders’ equity titled “Accumulated Other Comprehensive Loss.” Transaction gains and losses are included in net income (loss).AdvertisingAdvertising costs included in general, administration and sales, are expensed when the advertising first takes place. Advertising expense was $33,451,$45,155 and $82,289 for the years ended May 31, 2015, 2014 and 2013, respectively.Research and Development CostsResearch and development costs, predominately internal labor costs and costs of materials, are charged to expense when incurred.Warranty ReserveWarranty costs are estimated and charged to operations to cover a defined warranty period. The estimated warranty cost is based on the history of warrantyclaims for each particular product type. For new product types without a warranty history, preliminary estimates are based on historical information for similarproduct types. The warranty reserve accruals, included in other accrued liabilities, are reviewed periodically and updated based on warranty trends. Page 30 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Stock-Based CompensationStock-based compensation includes expense charges for all stock-based awards to employees and directors granted under the Company’s stock option plan.The Company requires the measurement and recognition of compensation for all stock-based awards made to employees and directors including stockoptions based on estimated fair values.Stock-based compensation recognized during the period is based on the value of the portion of the stock-based award that will vest during the period,adjusted for expected forfeitures. Compensation cost for all stock-based awards is recognized using the straight-line method.Income TaxesThe Company applies the asset and liability method in recording income taxes, under which deferred income tax assets and liabilities are determined, basedon the differences between the financial reporting and tax bases of assets and liabilities and are measured using currently enacted tax rates and laws.Additionally, deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of the deferred taxasset will not be realized. Management continues to review the level of the valuation allowance on a quarterly basis. There can be no assurance that theCompany’s future operations will produce sufficient earnings so that the deferred tax asset can be fully utilized. The Company currently maintains a fullvaluation allowance against net deferred tax assets.Earnings (Loss) Per ShareBasic earnings (loss) per share is computed using the weighted average number of common shares outstanding. Diluted earnings (loss) per share is computedusing the weighted average number of common shares outstanding, adjusted for dilutive incremental shares attributed to outstanding options to purchasecommon stock. Common stock equivalents for stock options are computed using the treasury stock method. In periods in which a net loss is incurred, nocommon stock equivalents are included since they are antidilutive and as such all stock options outstanding are excluded from the computation of dilutednet loss in those periods. 3,375, 7,636 and 13,002 potentially dilutive common shares from outstanding stock options have been excluded from dilutedearnings (loss) per share for the years ended May 31, 2015, 2014 and 2013, respectively.Concentration of Credit RiskFinancial instruments that potentially expose the Company to concentration of credit risk are trade accounts receivable. Credit terms generally include adiscount of 1.5% if the invoice is paid within ten days, with the net amount payable in 30 days.Financial InstrumentsThe carrying value of all other financial instruments potentially subject to valuation risk (principally consisting of cash and cash equivalents, accountsreceivable and accounts payable) approximates fair value because of their short-term maturities.Shipping and Handling ChargesThe Company incurs costs related to shipping and handling of its manufactured products. These costs are expensed as incurred as a component of cost ofsales. Shipping and handling charges related to the receipt of raw materials are also incurred, which are recorded as a cost of the related inventory. Page 31 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Use of EstimatesThe preparation of the consolidated financial statements in conformity with accounting principles generally accepted in the United States of Americarequires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes.Actual results could differ from those estimates.NOTE 3LINE OF CREDITThe Company had a $2 million bank line of credit secured by U.S. accounts receivable, inventories, general intangibles and a depository account. The line ofcredit was subject to certain covenant requirements if draws on the line were executed. Interest was payable at the bank’s prime rate or LIBOR plus 2.0%. Theterm on the line of credit expired September 1, 2014, and the Company chose not to renew the line. The outstanding balance on the line of credit was $0 ofMay 31, 2015 and 2014.NOTE 4INCOME TAXESThe provision for income taxes is as follows: Year ended May 31, 2015 2014 2013 Current $10,087 $9,332 $(8,284) Deferred 3,558 (155,252) (283,447) Change in valuation allowance (3,558) 155,252 283,447 Total provision for income taxes $10,087 $9,332 $(8,284) Deferred tax assets are comprised of the following components: 2015 2014 Basis difference of assets $336,196 $346,939 Inventory related items 260,152 269,916 Other reserves and liabilities 111,694 80,513 Net operating loss carryforward 850,655 880,373 General business and other credit carryforward 454,060 437,786 Other deferred items, net 8,322 1,994 Gross deferred tax assets 2,021,079 2,017,521 Deferred tax asset valuation allowance (2,021,079) (2,017,521) Net deferred tax asset $0 $0 Deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of the deferred tax asset will not berealized. The Company has recorded a substantial deferred tax asset related to temporary differences between book and tax bases of assets and liabilities.During the years ended May 31, 2015, 2014 and 2013, the Company increased its valuation allowance $3,558, $155,252, and $283,447 respectively, as aresult of the increase in the Company’s deferred tax assets. The Company has provided a full valuation allowance against all of its deferred tax assets as therecent losses have been given more weight than projected future income when determining the need for a valuation allowance. Page 32 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 The Company has federal net operating loss carryforwards of approximately $1.8 million which begin to expire in 2030 along with the federal generalbusiness and other credit carryforwards. The Company has state net operating loss carryforwards of approximately $2.4 million which begin to expire in2024.The provision for income taxes differs from the amount of income taxes determined by applying the U.S. statutory federal tax rate to pre-tax loss due to thefollowing: Year ended May 31, 2015 2014 2013 Statutory federal tax rate (34.0)% (34.0)% (34.0)% State taxes, net of federal benefit (4.4) (4.4) (4.4) Change in valuation allowance 3.8 29.3 51.7 Stock-based compensation 28.1 4.2 6.3 R&E tax credits (21.6) 1.5 (17.7) Effect of foreign income tax rates 11.1 1.8 1.9 Permanent and other differences 29.1 3.4 (5.3) Effective tax rate 12.1% 1.8% (1.5)% Each year the Company files income tax returns in the various federal, state and local income taxing jurisdictions in which it operates. These tax returns aresubject to examination and possible challenge by the taxing authorities. Positions challenged by the taxing authorities may be settled or appealed by theCompany. As a result, there is an uncertainty in income taxes recognized in the Company’s financial statements in accordance with ASC Topic 740. TheCompany applies this guidance by defining criteria that an individual income tax position must meet for any part of the benefit of that position to berecognized in an enterprise’s financial statements and provides guidance on measurement, derecognition, classification, accounting for interest and penalties,accounting in interim periods, disclosure, and transition. The liability for unrecognized tax benefits was $0 as of May 31, 2015 and 2014.Interest and penalties associated with uncertain tax positions are recognized as components of the “Provision for income taxes.” The liability for payment ofinterest and penalties was $0 as of May 31, 2015 and 2014.Several tax years are subject to examination by major tax jurisdictions. In the United States, federal tax years for Fiscal 2012 and after are subject toexamination. In the United Kingdom, tax years for Fiscal 2012 and after are subject to examination. In Canada, tax years for Fiscal 2005 and after are subjectto examination.NOTE 5COMMITMENTS AND CONTINGENCIESThe Company entered into a 5-year lease of manufacturing equipment in May 2014. The lease is classified as a capital lease and the asset, valued at $38,890,is included in the furniture, fixtures and equipment amount in Note 2 – Property and Equipment as of May 31, 2015 and 2014. Page 33 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 The future minimum lease payments under the capital lease for each of the years ending May 31 are as follows: Year ending May 31, 2016 $9,019 2017 9,019 2018 9,019 2019 12,384 2020 0 Thereafter 0 Total minimum lease payments 39,441 Less: amount representing interest (6,744) Present value of minimum lease payments $32,697 (1)Reflected in other accrued liabilities on the balance sheet as of May 31, 2015 and 2014.The Company leases certain facilities and equipment to support operations under non-cancelable operating leases and other contractual obligations. Totallease expense under operating leases for the years ended May 31, 2015, 2014 and 2013 amounted to $59,481, $58,517 and $56,721, respectively.The future minimum commitments under operating leases for each of the years ending May 31 are as follows: Year ending May 31, 2016 $39,860 2017 32,260 2018 0 2019 0 2020 0 Thereafter 0 In a transaction related to the acquisition of Schmitt Measurement Systems, Inc., formerly TMA Technologies, Inc. (“TMA”), the Company established aroyalty pool and vested in each shareholder and debt holder of the acquired company an interest in the royalty pool equal to the amount invested or loanedincluding interest payable through March 1995. The royalty pool is funded at 5% of net sales (defined as gross sales less returns, allowances and salescommissions) of the Company’s surface measurement products and future derivative products developed by Schmitt Industries, Inc., which utilize thesetechnologies. As part of the royalty pool agreement, each former shareholder and debt holder released TMA from any claims with regard to the acquisitionexcept their rights to future royalties. Royalty expense applicable to the years ended May 31, 2015, 2014 and 2013 amounted to $59,712, $30,386 and$28,797, respectively.In a transaction related to the acquisition of Xtero Datacom Inc., a British Columbia corporation (“Xtero”), former Xtero shareholders were eligible to receiveshares of stock that were exchangeable for shares of Schmitt common stock on a one-for-one basis based on 50% of the after-tax earnings derived from Xteroproducts during a five-year earn-out program that ended on May 31, 2013. This additional consideration would have increased the value of the intangibleasset recorded in connection with the acquisition. No additional shares of stock were issued to former Xtero shareholders during the five-year earn-outprogram. Page 34(1) Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 NOTE 6SEGMENT INFORMATIONThe Company has two reportable business segments: the design and assembly of dynamic balancing systems and components for the machine tool industry(Balancer), and the design and assembly of laser-based test and measurement systems (Measurement). The Company operates in three principal geographicmarkets: United States, Europe and Asia. Year Ended May 31, 2015 2014 2013 Balancer Measurement Balancer Measurement Balancer Measurement Gross sales $9,132,167 $5,191,970 $8,675,628 $4,472,945 $8,546,010 $4,796,620 Intercompany sales (1,281,931) 26,885 (954,417) (59,650) (831,888) (58,490) Net sales $7,850,236 $5,218,855 $7,721,211 $4,413,295 $7,714,122 $4,738,130 Operating loss $(323,288) $258,829 $(316,863) $(195,542) $(63,622) $(498,650) Depreciation expense $103,349 $43,991 $137,808 $55,849 $142,288 $70,794 Amortization expense $0 $119,232 $0 $134,636 $0 $134,633 Capital expenditures $58,700 $7,927 $56,192 $0 $80,492 $95,343 Geographic Information Year Ended May 31, 2015 2014 2013 North America $8,165,269 $7,474,067 $8,413,970 Europe 1,194,186 1,773,928 1,192,049 Asia 3,388,757 2,693,767 2,499,593 Other markets 320,879 192,744 346,640 Total Net Sales $13,069,091 $12,134,506 $12,452,252 Year Ended May 31, 2015 2014 2013 United States Europe United States Europe United States Europe Operating loss $(69,399) $4,940 $(479,218) $(33,187) $(442,939) $(119,333) Depreciation expense $147,340 $0 $193,657 $0 $213,082 $0 Amortization expense $119,232 $0 $134,636 $0 $134,633 $0 Capital expenditures $66,627 $0 $56,192 $0 $175,835 $0 Page 35 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Segment and Geographic Assets May 31, 2015 May 31, 2014 Segment assets to total assets Balancer $5,059,567 $4,863,423 Measurement 4,247,684 4,449,064 Corporate assets 1,796,684 1,511,904 Total assets $11,103,935 $10,824,391 Geographic assets to long-lived assets United States $1,110,878 $1,191,591 Europe 0 0 Total assets $1,110,878 $1,191,591 Geographic assets to total assets United States $10,107,523 $10,090,242 Europe 996,412 734,149 Total assets $11,103,935 $10,824,391 Note – Europe is defined as the European subsidiary, Schmitt Europe, Ltd.NOTE 7STOCK OPTIONS AND STOCK BASED COMPENSATIONThe Board of Directors adopted the 2014 Equity Incentive Plan (2014 Plan) on August 19, 2014, the 2004 Stock Option Plan (2004 Plan) in August 2004 andthe 1995 Stock Option Plan (1995 Plan) in December 1995, which was amended in August 1996 and restated in August 1998. The 2014 Plan provides for thegrant of (i) stock options (both nonqualified and incentive stock options), (ii) stock appreciation rights or SARs, (iii) restricted stock, (iv) restricted stockunits or RSUs, (v) performance awards, and (vi) other share-based awards. An incentive stock option (NSO) granted under the 2014 Plan is intended to qualifyas an incentive stock option (ISO) and a nonstatutory stock option granted under the 2014 Plan is not intended to qualify as an ISO. An option granted underthe 2004 Plan and/or 1995 Plan (the Plans) might be either an ISO, or an NSO. ISOs may be granted only to employees and members of the Board of Directorsof the Company and are subject to certain limitations, in addition to restrictions applicable to all stock options under the Plan. Options not meeting theselimitations will be treated as NSOs. The purchase price of ISOs is fair market value on the date of grant; the purchase price of NSOs may vary from fair marketvalue. Vesting is at the discretion of the compensation committee of the Board of Directors, but generally is either 50% at grant date and 16.7% on eachanniversary thereafter; 25% at grant date and 25% on each anniversary thereafter or 0% at grant date and 33% on each anniversary thereafter. The Companyinitially reserved 400,000 shares for issuance under the 1995 Plan and 300,000 shares for issuance under the 2004 Plan and the 2014 Plan. The 1995 Planexpired in December 2005 and no additional options may be issued under the 1995 Plan, although expiration of the 1995 Plan did not affect the rights ofpersons who received stock grants under the 1995 Plan. The 2004 Plan expired in August 2015 and no additional options may be issued under the 2004 Plan.Stock-based compensation recognized in the Company’s Consolidated Financial Statements for the years ended May 31, 2015, 2014 and 2013 includescompensation cost for stock-based awards granted. All outstanding options will expire no later than 2024.The Company uses the Black-Scholes option pricing model as its method of valuation for stock-based awards. The Company’s determination of the fair valueof stock-based awards on the date of grant using an option pricing Page 36 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 model is affected by our stock price as well as assumptions regarding a number of highly complex and subjective variables. Although the fair value of stock-based awards is determined in accordance with ASC Topic 718, the Black-Scholes option pricing model requires the input of highly subjective assumptions,and other reasonable assumptions could provide differing results. These variables include, but are not limited to: • Risk-Free Interest Rate. The Company bases the risk-free interest rate on the implied yield currently available on U.S. Treasury issues with anequivalent remaining term approximately equal to the expected life of the award. • Expected Life. The expected life of awards granted represents the period of time that they are expected to be outstanding. The Companydetermines the expected life based on historical experience with similar awards, giving consideration to the contractual terms, vesting schedulesand pre-vesting and post-vesting forfeitures. • Expected Volatility. The Company estimates the volatility of its common stock at the date of grant based on the historical volatility of itscommon stock. The volatility factor the Company uses is based on its historical stock prices over the most recent period commensurate with theestimated expected life of the award. These historical periods may exclude portions of time when unusual transactions occurred. • Expected Dividend Yield. The Company does not anticipate paying any cash dividends in the foreseeable future. Consequently, the Companyuses an expected dividend yield of 0. • Expected Forfeitures. The Company uses relevant historical data to estimate pre-vesting option forfeitures. The Company records stock-basedcompensation only for those awards that are expected to vest.The Company has computed, to determine stock-based compensation expense recognized for the years ended May 31, 2015, 2014 and 2013, the value of allstock options granted using the Black-Scholes option pricing model as prescribed by ASC Topic 718 using the following assumptions: Year Ended May 31, 2015 2014 2013Risk-free interest rate 2.7% 3.5% 2.5%Expected life 4.7 years 4.3 years 4.2 yearsExpected volatility 55.3% 62.5% 63.8%Stock-Based Compensation Under ASC Topic 718The total stock-based compensation expense recognized under ASC Topic 718 was $72,574, $57,726 and $89,888 during Fiscal 2015, 2014 and 2013,respectively. All stock-based compensation expense has been recorded as general, administration and sales expense in the Consolidated FinancialStatements.As of May 31, 2015, the Company had a total of 332,500 outstanding stock options (213,335 vested and exercisable and 119,165 non-vested) with aweighted average exercise price of $3.68. The Company estimates that a total of $84,898 will be recorded as additional stock-based compensation expenseover a weighted-average period of 1.5 years for all options which were outstanding as of May 31, 2015, but which were not yet vested. Page 37 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 Options outstanding and exercisable consist of the following as of May 31, 2015: Outstanding Options Exercisable Options Numberof Shares WeightedAverageExercisePrice WeightedAverageRemainingContractualLife (yrs) Numberof Shares WeightedAverageExercisePrice 0 $2.30 0.0 0 $2.30 35,000 2.53 8.4 11,668 2.53 112,500 2.84 9.0 16,667 2.90 130,000 3.65 6.0 130,000 3.65 5,000 5.80 0.4 5,000 5.80 50,000 6.25 3.0 50,000 6.25 332,500 3.68 6.7 213,335 4.19 Options granted, exercised, canceled and expired under the Company’s stock option plan during the years ended May 31, 2015, 2014 and 2013 aresummarized as follows: Numberof Shares WeightedAverageExercise Price Options outstanding - May 31, 2012 281,666 $4.16 Options granted 25,000 2.90 Options exercised 0 0.00 Options forfeited/cancelled (5,000) 3.65 Options outstanding - May 31, 2013 301,666 4.06 Options granted 35,000 2.53 Options exercised (5,000) 2.30 Options forfeited/cancelled (50,000) 4.82 Options outstanding - May 31, 2014 281,666 3.77 Options granted 87,500 2.82 Options exercised 0 0.00 Options forfeited/cancelled (36,666) 2.30 Options outstanding - May 31, 2015 332,500 3.68 The total intrinsic value of all outstanding options as of May 31, 2015 and 2014 was $7,350 and $2,450, respectively, and the total intrinsic value ofexercisable options as of May 31, 2015 and 2014 was $31,366 and $20,166, respectively. The total intrinsic value of options exercised during the yearsended May 31, 2015, 2014 and 2013 was $0, $3,025 and $0, respectively. Page 38 Schmitt Industries, Inc.NOTES TO CONSOLIDATED FINANCIAL STATEMENTSFOR THE YEARS ENDED MAY 31, 2015, 2014 AND 2013 NOTE 8EARNINGS PER SHAREBasic earnings per share is computed using the weighted average number of shares outstanding. Diluted earnings per share is computed using the weightedaverage number of shares outstanding, adjusted for dilutive incremental shares attributed to outstanding options to purchase common stock. The followingtable is a reconciliation of the numerators and denominators of the basic and diluted per share computations for each of the three years in the period endedMay 31: Netincome/(loss)(Numerator) WeightedAverage Shares(Denominator) Per ShareAmount Year ended May 31, 2015 Basic earnings per share Loss available to common stockholders $(93,669) 2,995,910 $(0.03) Effect of dilutive securities stock options 0 0 Diluted earnings per share Loss available to common stockholders $(93,669) 2,995,910 $(0.03) Year ended May 31, 2014 Basic earnings per share Income available to common stockholders $(539,624) 2,995,910 $(0.18) Effect of dilutive securities stock options 0 0 Diluted earnings per share Income available to common stockholders $(539,624) 2,995,910 $(0.18) Year ended May 31, 2013 Basic earnings per share Loss available to common stockholders $(539,882) 2,990,910 $(0.18) Effect of dilutive securities stock options 0 0 Diluted earnings per share Loss available to common stockholders $(539,882) 2,990,910 $(0.18) NOTE 9EMPLOYEE BENEFIT PLANSThe Company adopted the Schmitt Industries, Inc. 401(k) Profit Sharing Plan & Trust effective June 1, 1996. Employees must meet certain age and servicerequirements to be eligible. Participants may contribute up to 15% of their eligible compensation which may be partially matched by the Company. TheCompany may make further contributions in the form of a profit sharing contribution or a discretionary contribution. The Company made matchingcontributions in conjunction with employee contributions to the plan totaling $51,999, $55,917 and $56,633 during the years ended May 31, 2015, 2014and 2013, respectively. Page 39 Report of Independent Registered Public Accounting FirmBoard of Directors and ShareholdersSchmitt Industries, Inc.We have audited the accompanying consolidated balance sheets of Schmitt Industries, Inc. and its subsidiaries (the “Company”) as of May 31, 2015 and2014, and the related consolidated statements of operations and comprehensive loss, stockholders’ equity and cash flows for the years ended May 31, 2015,2014 and 2013. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion onthese financial statements based on our audits.We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require thatwe plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. TheCompany is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included considerationof internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose ofexpressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An auditalso includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accountingprinciples used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believethat our audits provide a reasonable basis for our opinions.In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of SchmittIndustries, Inc. as of May 31, 2015 and 2014 and the consolidated results of its operations and its cash flows for the years ended May 31, 2015, 2014 and2013 in conformity with accounting principles generally accepted in the United States of America./s/ MOSS-ADAMS LLPPortland, OregonAugust 12, 2015 Page 40 Item 9.Changes in and Disagreements with Accountants on Accounting and Financial DisclosureNone. Item 9A.Controls and ProceduresEvaluation of Disclosure Controls and ProceduresWe maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted underthe Securities Exchange Act of 1934, as amended (Exchange Act), is recorded, processed, summarized and reported within the time periods specified in SECrules and forms. Our disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required tobe disclosed in our reports filed under the Exchange Act is accumulated and communicated to management as appropriate to allow timely decisionsregarding required disclosures. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures, including thepossibility of human error and the circumvention or overriding of the controls and procedures. Accordingly, even effective disclosure controls andprocedures can only provide reasonable assurance of achieving their control objectives, and management necessarily is required to use its judgment inevaluating the cost-benefit relationship of possible controls and procedures.An evaluation was carried out under the supervision and with the participation of the Company’s management, including the Chief Executive Officer (CEO)and Chief Financial Officer (CFO), of the effectiveness of our disclosure controls and procedures as of the end of the period covered by this report as definedin Exchange Act Rule 13a-15(e) and Rule 15d-15(e). Based on that evaluation, the CEO and CFO have concluded that, as of the end of the period covered bythis report, the Company’s disclosure controls and procedures are effective in ensuring that information required to be disclosed in our Exchange Act reportsis (1) recorded, processed, summarized and reported in a timely manner, and (2) accumulated and communicated to our management, including the our CEOand CFO, as appropriate, to allow timely decisions regarding required disclosure.Management’s Report on Internal Control Over Financial ReportingOur management is responsible for establishing and maintaining adequate internal controls over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)). Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an evaluation of theeffectiveness of our internal controls over financial reporting based on the framework in Internal Controls – Integrated Framework issued by the Committeeof Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal Control – Integrated Framework, ourmanagement concluded that our internal controls over financial reporting were effective as of May 31, 2015.This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financialreporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to SEC rules adopted inconformity with the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010.Changes in Internal Control over Financial ReportingThere were no changes in our internal control over financial reporting (as defined in Exchange Rules 13a-15(f) and 15d-15(f)) that occurred during thequarter ended May 31, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. Item 9B.Other InformationNone. Page 41 PART IIICertain information required by Part III is included in the Company’s definitive Proxy Statement for its 2015 Annual Meeting of Shareholders (“ProxyStatement”) and is incorporated herein by reference. The Proxy Statement will be filed pursuant to Regulation 14A of the Securities Exchange Act of 1934not later than 120 days after the end of the fiscal year covered by this Report. Item 10.Directors, Executive Officers and Corporate GovernanceThe information required by this item is included in the Company’s Proxy Statement relating to the 2015 Annual Meeting of Shareholders and isincorporated herein by reference. Item 11.Executive CompensationThe information required by this item is included in the Company’s Proxy Statement relating to the 2015 Annual Meeting of Shareholders and isincorporated herein by reference. Item 12.Security Ownership of Certain Beneficial Owners and Management and Related Stockholder MattersThe information required by this item is included in the Company’s Proxy Statement relating to the 2015 Annual Meeting of Shareholders and isincorporated herein by reference. Item 13.Certain Relationships and Related Transactions and Director IndependenceThe information required by this item is included in the Company’s Proxy Statement relating to the 2015 Annual Meeting of Shareholders and isincorporated herein by reference. Item 14.Principal Accounting Fees and ServicesThe information required by this item is included in the Company’s Proxy Statement relating to the 2015 Annual Meeting of Shareholders and isincorporated herein by reference. Page 42 PART IV Item 15.Exhibits and Financial Statement Schedules (a)Financial Statements: (1)Consolidated Balance Sheets as of May 31, 2015 and 2014Consolidated Statements of Operations and Comprehensive Loss for the years ended May 31, 2015, 2014 and 2013Consolidated Statements of Cash Flows for the years ended May 31, 2015, 2014 and 2013Consolidated Statements of Stockholders’ Equity for the years ended May 31, 2015, 2014 and 2013Notes to Consolidated Financial Statements for the years ended May 31, 2015, 2014 and 2013Report of Independent Registered Public Accounting Firm (2)Financial Statement Schedules: All financial statement schedules are omitted either because they are not applicable, not required, or therequired information is included in the financial statements or notes thereto. (3)Exhibits: Reference is made to the list on page 45 of the Exhibits filed with this report. Page 43 SIGNATURESPursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on itsbehalf by the undersigned, thereunto duly authorized. SCHMITT INDUSTRIES, INC.By: /s/ James A. Fitzhenry James A. Fitzhenry President and Chief Executive OfficerDate: August 12, 2015Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrantand in the capacities indicated on August 12, 2015. Signature Title/s/ Wayne A. CaseWayne A. Case Chairman of the Board/s/ James A. FitzhenryJames A. Fitzhenry Director, President and Chief Executive Officer (PrincipalExecutive Officer)/s/ Ann M. FergusonAnn M. Ferguson Chief Financial Officer and Treasurer(Principal Financial and Accounting Officer)/s/ Maynard BrownMaynard Brown Director/s/ Michael J. EllsworthMichael J. Ellsworth Director/s/ David M. HudsonDavid M. Hudson Director Page 44 INDEX TO EXHIBITS Exhibits DescriptionExhibits marked with an asterisk (*) are incorporated by reference to exhibits or appendices previously filed with the Securities and Exchange Commission,as indicated by the references in brackets. All other exhibits are filed herewith. *2.1 Arrangement Agreement by and among Schmitt Industries, Inc., Schmitt Industries (Canada) Limited, and Xtero Datacom Inc. datedDecember 14, 2007.[Form 10-Q for the fiscal quarter ended February 29, 2008, Exhibit 2.1] *2.2 Amending Agreement to Arrangement Agreement by and among Schmitt Industries, Inc., Schmitt Industries (Canada) Limited, and XteroDatacom Inc. dated February 7, 2008.[Form 10-Q for the fiscal quarter ended February 29, 2008, Exhibit 2.2] *2.3 Asset Purchase Agreement between Schmitt Industries, Inc., and Glenn Valliant, an individual doing business as Optical Dimensions,dated September 30, 2009.[Form 10-Q for the fiscal quarter ended November 30, 2009, Exhibit 2.1] *3.1 Second Restated Articles of Incorporation of Schmitt Industries, Inc.[Form 10-K for the fiscal year ended May 31, 1999, Exhibit 3(i)] *3.2 Second Restated Bylaws of Schmitt Industries, Inc.[Form 10-K for the fiscal year ended May 31, 1999, Exhibit 3(ii)] *4.1 See exhibits 3.1 and 3.2 for provisions of the Articles of Incorporation and Bylaws defining the rights of security holders.*10.1† Schmitt Industries, Inc. Amended & Restated Stock Option Plan.[Form 10-K for the fiscal year ended May 31, 1999, Exhibit 10.1]*10.2† Schmitt Industries, Inc. 2004 Stock Option Plan.[Appendix B to Schedule 14A filed on August 23, 2004]*10.3 Amendment No. 1 to Loan Agreement between the Company and Bank of America, N.A. dated February 28, 2012.[Form 10-Q for the fiscal quarter ended February 29, 2012, Exhibit 10.1]*10.4 Form of Indemnification Agreement.[Form 8-K filed on April 11, 2014, Exhibit 10.1]*10.5 First Amended and Restated Loan Agreement with Bank of America, N.A.[Form 8-K filed on April 11, 2014, Exhibit 10.2]*10.6 Security Agreement (Multiple Use) with Bank of America, N.A.[Form 10-Q for the quarterly period ended February 28, 2009, Exhibit 10.2]*10.7 Security Agreement (Deposit Account – Specific) with Bank of America, N.A.[Form 8-K filed on April 11, 2014, Exhibit 10.4]*10.8† Schmitt Industries, Inc. 2014 Equity Incentive Plan.[Appendix A to Schedule 14A filed on August 26, 2014]*14.1 Code of Ethics and Business Conduct.[Form 10-K for the fiscal year ended May 31, 2004, Exhibit 14.1] 21.1 Subsidiaries of Schmitt Industries, Inc. as of May 31, 2015. 23.1 Consent of Independent Registered Public Accounting Firm. 31.1 Certification of Principal Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-OxleyAct of 2002. Page 45 Exhibits Description 31.2 Certification of Principal Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-OxleyAct of 2002. 32.1 Certification of Principal Executive Officer and Principal Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant toSection 906 of the Sarbanes-Oxley Act of 2002.101.INS XBRL Instance Document101.SCH XBRL Taxonomy Extension Schema Document101.CAL XBRL Taxonomy Extension Calculation Linkbase Document101.LAB XBRL Taxonomy Extension Label Linkbase Document101.PRE XBRL Taxonomy Extension Presentation Linkbase Document101.DEF XBRL Taxonomy Extension Definition Linkbase Document †Management contract or compensatory plan or arrangement required to be filed as an exhibit to this Form 10-K. Page 46 EXHIBIT 21.1SUBSIDIARIES OF SCHMITT INDUSTRIES, INC.AS OF MAY 31, 2015 Subsidiary State of Incorporation orCountry in Which OrganizedSchmitt Measurement Systems, Inc. OregonSchmitt Europe, Ltd. United KingdomSchmitt Industries Canada, Ltd. Canada EXHIBIT 23.1CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRMWe consent to the incorporation by reference in the Registration Statement (No. 333-03910) on Form S-8 of our report dated August 12, 2015, relating to theconsolidated financial statements appearing in this Annual Report on Form 10-K of Schmitt Industries, Inc. for the year ended May 31, 2015./s/ Moss-Adams LLPPortland, OregonAugust 12, 2015 EXHIBIT 31.1CERTIFICATION PURSUANT TO18 U.S. C. SECTION 1350,AS ADOPTED PURSUANT TOSECTION 302 OF THE SARBANES-OXLEY ACT OF 2002I, James A. Fitzhenry, certify that:1. I have reviewed this annual report on Form 10-K of Schmitt Industries, Inc.;2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make thestatements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financialcondition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in ExchangeAct Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13-15(f) and 15d-15(f)) for the registrantand have:(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, toensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities,particularly during the period in which this report is being prepared;(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under oursupervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposesin accordance with generally accepted accounting principles;(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about theeffectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscalquarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, theregistrant’s internal control over financial reporting; and5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to theregistrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonablylikely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controlover financial reporting. Date: August 12, 2015 /s/ James A. Fitzhenry James A. Fitzhenry, President and Chief Executive Officer EXHIBIT 31.2CERTIFICATION PURSUANT TO18 U.S. C. SECTION 1350,AS ADOPTED PURSUANT TOSECTION 302 OF THE SARBANES-OXLEY ACT OF 2002I, Ann M. Ferguson, certify that:1. I have reviewed this annual report on Form 10-K of Schmitt Industries, Inc.;2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make thestatements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financialcondition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in ExchangeAct Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13-15(f) and 15d-15(f)) for the registrantand have:(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, toensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities,particularly during the period in which this report is being prepared;(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under oursupervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposesin accordance with generally accepted accounting principles;(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about theeffectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscalquarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, theregistrant’s internal control over financial reporting; and5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to theregistrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonablylikely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controlover financial reporting. Date: August 12, 2015 /s/ Ann M. Ferguson Ann M. Ferguson, Chief Financial Officer and Treasurer Exhibit 32.1CERTIFICATION PURSUANT TO18 U.S.C. SECTION 1350,AS ADOPTED PURSUANT TOSECTION 906 OF THE SARBANES-OXLEY ACT OF 2002In connection with the Annual Report of Schmitt Industries, Inc. (the “Company”) on Form 10-K for the fiscal year ended May 31, 2015 as filed with theSecurities and Exchange Commission on the date hereof (the “Report”), we, James A. Fitzhenry and Ann M. Ferguson, President and Chief Executive Officerand Chief Financial Officer and Treasurer, respectively, of the Company, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that to our knowledge:(1) The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended; and(2) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company. /s/ James A. FitzhenryJames A. FitzhenryPresident and Chief Executive OfficerAugust 12, 2015/s/ Ann M. FergusonAnn M. FergusonChief Financial Officer and TreasurerAugust 12, 2015
Continue reading text version or see original annual report in PDF format above