Vuzix
Annual Report 2015

Plain-text annual report

UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K þ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 31, 2015 o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 Commission file number: 001-35955 Vuzix Corporation (Exact name of registrant as specified in its charter) Delaware (State of incorporation) 25 Hendrix Road, Suite A West Henrietta, New York (Address of principal executive office) 04-3392453 (I.R.S. employer identification no.) 14586 (Zip code) (585) 359-5900 (Registrant’s telephone number including area code) Securities registered pursuant to Section 12(b) of the Act: common stock, par value $0.001 per share Securities registered pursuant to Section 12(g) of the Act: warrants to purchase common stock Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No þ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes o No þ Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No o Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference into Part III of this Form 10-K or any amendment to this Form 10-K. o Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one): Large accelerated filer o Accelerated filer o Non-accelerated filer o (Do not check if a smaller reporting company) Smaller reporting company þ Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ The aggregate market value of the voting and non-voting common equity of the registrant held by non-affiliates as of June 30, 2015 was approximately $74,461,000 (based on the closing price of the common stock of $5.99 per share on that date, as reported on the NASDAQ Capital Market and, for purposes of this computation only, the assumption that all of the registrant’s directors and executive officers are affiliates and that beneficial holders of 10% or more of the outstanding common stock are affiliates). As of March 30, 2016, there were 16,097,951 shares of the registrant’s common stock outstanding. DOCUMENTS INCORPORATED BY REFERENCE Part III of this Form 10-K incorporates by reference portions of the registrant’s proxy statement for its 2016 annual meeting of stockholders.  TABLE OF CONTENTS Item 1 Item 1A Item 1B Item 2 Item 3 Item 4 Item 5 Item 6 Item 7 Item 7A Item 8 Item 9 Item 9A Item 9B Item 10 Item 11 Item 12 Item 13 Item 14 Item 15 Business Risk Factors Unresolved Staff Comments Properties Legal Proceedings Mine Safety Disclosure Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities Selected Financial Data Management’s Discussion and Analysis of Financial Condition and Results of Operations Quantitative and Qualitative Disclosures about Market Risk Financial Statements and Supplementary Data Changes in and Disagreements with Accountants on Accounting and Financial Disclosure Controls and Procedures Other Information Directors, Executive Officers and Corporate Governance Executive Compensation Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters Certain Relationships and Related Transactions, and Director Independence Principal Accounting Fees and Services Exhibits and Financial Statement Schedules Page 1 14 32 32 33 33 33 34 34 45 45 45 45 48 48 48 48 48 48 49 ii FORWARD-LOOKING STATEMENTS This annual report includes forward-looking statements. These statements are based on our management’s beliefs and assumptions and on information currently available to our management. The forward-looking statements are contained principally under the headings “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business.” Forward- looking statements include statements concerning: • • • • • • • • • • • our possible or assumed future results of operations; our business strategies; our ability to attract and retain customers; our ability to sell additional products and services to customers; our cash needs and financing plans; our competitive position; our industry environment; our potential growth opportunities; expected technological advances by us or by third parties and our ability to leverage them; the effects of future regulation; and the effects of competition. All statements in this annual report that are not historical facts are forward-looking statements. We may, in some cases, use terms such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “will,” “would” or similar expressions that convey uncertainty of future events or outcomes to identify forward-looking statements. Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date the statements are made and we undertake no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as may be required by applicable law. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance or achievements. Except as required by applicable law, including the securities laws of the United States, we do not intend to update any of the forward-looking statements to conform these statements to actual results. PART I Item 1. Business Company Overview We are engaged in the design, manufacture, marketing and sale of wearable display and smart glasses devices known commercially as Video Eyewear (also referred to as head mounted displays (or HMDs), Smart Glasses, wearable displays, video glasses, personal viewers, near-eye virtual displays, and near-eye displays or NEDs). These devices are worn like eyeglasses and feature built-in video screens and in some cases a computer, that enable the user to view and interact with video and digital content, such as movies, computer data, the Internet or video games. Our Video Eyewear products provide virtual large high-resolution screens, fit in a user’s pocket or purse and can be viewed practically anywhere, anytime. They can also be used for virtual and augmented reality applications, in which the wearer is either immersed in a computer generated world or has their real world view augmented with computer generated information or graphics as is typical in enterprise applications. In early 2014, we started selling Smart Glasses, a new category of Video Eyewear that is currently aimed at enterprise customers. Our Smart Glasses include a wearable computer and has much of the capabilities of a smartphone including wireless internet access, GPS, Android OS and more, and are literally worn like a pair of glasses. We produce both monocular and binocular Video Eyewear devices. Video Eyewear are designed to work with mobile electronic devices, such as cell phones, laptop computers, tablets, portable media players and gaming systems. Historically, we have focused on three markets: the consumer markets for gaming, entertainment and mobile video, smart glass products for enterprise, and rugged mobile displays for defense markets. In June 2012, we sold the assets that sold products and provided services, directly and indirectly, to military organizations and defense organizations. Accordingly, we now focus primarily on the consumer entertainment and enterprise markets. Users of mobile devices, like tablets and smartphones, sometimes use such devices to replace their personal computer or console game systems. We believe the displays currently used in these mobile devices do not always work ideally for this purpose because they are either too small, which makes it difficult to view the detail of the images that they display, or too large, making them heavy and difficult to carry. In contrast, our Video Eyewear products enable users of many mobile devices to effectively view the entire screen on a small, eyeglass-like device. Our Smart Glasses, although designed to work as a peripheral to the smartphone, have many of the same capabilities of the smartphone itself, allowing them to be used as a hands free wearable computer. Our products can be used as a wearable substitute for large-screen televisions or desktop computer monitors and with the Smart Glasses, allow users to utilize many smartphone applications while keeping their smartphones in a pocket or purse. Our Video Eyewear products employ microdisplays that are smaller than one-inch diagonally, with some as small as one-quarter of an inch. They currently can display an image with a resolution of up to 1280×720 pixels (High Definition or HD). Users view the display through our proprietary optics and projection engines. Using these optics and displays, our Video Eyewear provides a virtual image that appears similar to the image ranging from laptop PC at normal working distances up to wall sized home theatre screens. For example, when viewed through our optics, a high-resolution 0.24-inch diagonal microdisplay can provide a viewing experience comparable to that on a 125-inch diagonal television screen viewed at ten feet. We believe one of the most promising future uses of wearable displays are Smart Glasses and Augmented Reality (AR) glasses where virtual 3D computer-generated objects and information is superimposed to enhance their real world views. This see-through capability is accomplished using a see-through optic, such as our waveguide optics. In the past, see-through HMDs displayed the real world using semi-transparent mirrors placed in front of the user’s eyes. These HMDs were large and bulky and so they had little mass market appeal. We have developed thin optics, called waveguides that enable miniature display engines to be mounted in the temples of the HMD, which allows the form factor of the Smart Glasses to be comparable to conventional eyeglasses. We believe that with a hands free wearable computer like our M100 Smart Glasses that can support AR applications, you have the capability to merge virtual information with the real world. With this capability we have the potential to penetrate many new markets in the consumer and enterprise markets. An example of AR is the yellow “first down” line seen in television broadcasts of American football games, in which the line the offensive team must cross to receive a first down is superimposed on the field itself. The real-world elements are the football field and players; the virtual element is the yellow line. We believe see-through Video Eyewear will enable this kind of experience on smartphones or on Smart Glasses running their own native AR applications, virtually anywhere and anytime. Our Smart Glasses product line runs these kinds of applications natively as they have much of the capabilities of a smartphone built into them; including running full operating systems like Google, Inc.’s Android. Overall Strategy Our goal is to establish and maintain a leadership position as a worldwide supplier of Video Eyewear and Smart Glasses solutions. We intend to offer our technologies across major markets, platforms and applications. We will strive to be an innovator in designing near- eye wearable display devices that can enable new mobile video viewing, general entertainment and VR and AR applications. 2 To maintain and enhance our position as a leading provider of Video Eyewear and Smart Glasses solutions, we intend to: · · · · · · · · · · · · improve brand name recognition; provide excellent products and service; develop products based on our unique technology for both specialized and large enterprise and consumer markets; broaden and develop strategic relationships and partnerships; offer to sell our products or license our technology to third party companies that would incorporate and sell them as a new product with their own brand name (OEM partners); promote and enhance development of third party software that can take advantage of our products; reduce production and overhead costs by further outsourcing while moving to higher margin product offerings; extend our proprietary technology leadership; enhance and protect our intellectual property portfolio; establish multiple revenue sources; invest in highly qualified personnel; and build and maintain strong product design capabilities. The Market Current mobile display technology is almost universally based on direct view screens. These displays for mobility purposes are designed to be small and make portability easy. At the same time these displays must be held by the user and depending on their size, it can be difficult for these displays to produce human readable high resolution content without magnification, which reduces screen resolution, or being held at a reasonably close reading distance. Our products are aimed at solving these problems by creating hands-free large screens that are interactive and fit in tiny packages (eyeglasses). The wireless and entertainment industry has evolved considerably, and continues to do so. The mobile phone, once simply a means to communicate by voice while “on-the-go,” has evolved into a ubiquitous, location-aware, smart mobile computing device. Mobile products such as smartphones and tablet computers have become the leading computing platforms with an installed base surpassing that of PCs. Mobile technology is redefining the way people interact with their world and has become an essential lifestyle management and entertainment tool personalized to users’ unique needs. We believe that interactive AR content will significantly change the way mobile products are used. We believe wearable near-eye displays that can provide the equivalent of a high resolution wired internet experience at home or office will be a key component in advanced wearable wireless devices as these systems provide high resolution images without compromising the portability of the product or requiring the users of the product to hold it in their hands. Our business focuses on the mobile consumer entertainment and gaming markets and the mobile commercial, enterprise and industrial markets. The demand for wearable displays in these markets is being driven by such factors as: · Increasing demand for Internet access “anywhere, anytime”. · An increasing number of hands-free enterprise, commercial and medical applications for which our products are well suited and when wearable display products are employed for these use cases a significant ROI is typically achieved. · Video gaming around the world continues to grow even as more users migrate a greater portion of their game time to mobile devices. We believe that our high resolution Virtual Display technologies can significantly increase user satisfaction with gaming applications by engaging the user with a large high resolution mobile screen that also enables stereoscopic imagery and interactive head tracking. Our Virtual Reality and Augmented Reality Video Eyewear products provide this capability. · We believe the growing use of augmented reality applications on smartphones will drive the need for a wearable display solution to replace the need to hold up the smartphones to use the application. 3 · The continued expansion of 3D and 3600 virtual video content ranging from Hollywood movies, to games, and to immersive virtual experiences is creating a need for methods to play and interact with this content. We believe that Video Eyewear, with its dual display design and built in tracking sensors, is well suited for the playback of 3D and 3600 virtual video content and avoids many of the drawbacks such as flicker, image cross talk and color separation, commonly encountered by shutter or color anaglyph glasses. Target Markets Our target markets and applications by major sector are: Enterprise Our Smart Glasses products are currently focused on the enterprise, industrial and medical markets. These Smart Glasses products run native Android applications within the glasses that allow them to stream video in real-time which is very useful for many applications. Within the short period of time we have been selling M100s they are being used for many applications including remote camera viewfinder displays and wearable computer displays, viewing of wireless sensor data, providing hands-free access to manuals and other information and for on-site, in-the-field maintenance, warehouse pick and place, servicing, training and education. Consumer Media and Entertainment. We believe that there is an increasing demand for convenient, high-resolution, interactive 3D displays to enjoy content such as VR 360 videos, movies, entertainment and the Internet in mobile environments and as a secondary display in the home. Gaming. We believe that there is a need for high-resolution, interactive, stereoscopic 3D display devices for use with desktop computers, consoles, tablets and other gaming products. We believe that gaming on mobile devices that have graphics and processing capabilities closely equivalent to laptop computers and consoles but with small, direct view screens is not a satisfactory experience for many consumers. Our Video Eyewear products are designed to significantly enhance a consumer’s experience by providing larger-appearing, high-resolution images with stereoscopic 3D capabilities. We anticipate that VR and AR will become increasingly popular entertainment applications. Both VR and AR are difficult to implement using traditional desktop computer monitors and televisions but can be successfully implemented with Video Eyewear. Our technologies and products enable a user to use those applications. Augmented Reality for all Markets We offer smart wearable display products that enable development and deployment of AR applications. AR Smart Glasses enable its wearer to see computer-generated information, graphics or images projected into the real world environment or upon an object that the user is observing. Thus, whether in the warehouse, on the factory floor, or in-the-field, users may access a manual, tutorial, or image that will assist them in completing a task or locating an item, while also viewing their current surroundings and nearby objects. We anticipate AR applications will include the following areas: Field service, warehousing, and maintenance; · · Task support for industrial, manufacturing and medical applications; · Advanced navigation both for the enterprise and consumer markets; · · · Mobile commerce and visual search applications; and · Social networking; Location and scene based entertainment and education applications; Real time language translation. 4 Additional possible applications of AR-enabled Smart Glasses include hands free alerts, messaging, location and context sensitive information and social interaction. Products We now produce and sell two main types of wearable display products: Video Eyewear (for on-the-go users as mobile displays for entertainment, gaming and VR for stepping into virtual worlds, simulations & gaming); and Smart Glasses with Augmented Reality (AR) (for overlaying virtual information from the cloud onto the real world). Our products are available with varying features, including with and without computers, and are offered as either monocular or binocular display systems. Our Smart Glasses have many of the capabilities of a smartphone such as cameras and computer processors that can allow applications to be run directly in the Smart Glasses, enabling cloud connected applications through a wireless link directly with the glasses. We believe we provide one of the broadest range of Video Eyewear and Smart Glass product offerings available in the market and that our products contain some of the most advanced electronics and optics for their target markets and uses. Our products include: Binocular Video Eyewear Products We have won Consumer Electronics Show (CES) awards for innovation for the past 11 consecutive years (2005 to 2016) for our series of Binocular Video Eyewear. Our binocular Video Eyewear products have included several models with differing native resolutions and virtual screen sizes. Our binocular Video Eyewear products contain two microdisplays (a separate display for each eye), typically mounted in a frame attached to eyeglass-style temples or stereo headphones. These products enable mobile and hands-free private viewing of video content on screens that simulate home theater-sized screens, all of which support 3D video applications. These products can be employed as mobile high-resolution displays with products such as smartphones with video output capability, laptop computers, tablet computers, portable DVD/Blu-Ray players, and personal digital media/video players (such as video iPods). The Wrap series of binocular Video Eyewear, introduced in the fall of 2009, was the fourth generation of Video Eyewear products that we have produced since 2005. It was discontinued in early 2015 due to its lower resolution capabilities in anticipation of our new higher resolution models. At recent CES shows we introduced a new binocular Video Eyewear concept, “video headphones” that have won awards in the last two years in the wearable technology categories. Video headphones are effectively noise isolating audio headphones with an HD video visor that slides down in front of the user’s eyes to create a wearable home theater experience. These first video headphones model, iWear are for the mobile video and VR gaming markets. This model will include 720p HD displays, HDMI 1.4a 3D video support. The iWear Video Headphones commenced shipping in December 2015. At CES 2016 we presented a new line of Video Eyewear called the VidWear® B3000 which allows for full see-through capabilities in fashion glasses. Several models of this technology will ultimately be available, including the VidWear B3000 HDMI based video viewer, the VidWear B3000 wireless smart glasses, which allow users to experience cloud connected information and entertainment everywhere they go and the powerful AR3000 Augmented Reality glasses. Both the B3000 and AR3000 are expected to be released in the first half of 2017. We expect this advanced line of products will utilize extremely thin and light weight optics employed in fashion wear eyeglass frames. Monocular Video Eyewear Products From 2003 to 2009, we sold a line of monocular (single eye) Video Eyewear Products called the M920, which were discontinued in 2009 and replaced with a monocular high-resolution Video Eyewear model called Tac-Eye. This product is ruggedized and designed to clip onto a pair of ballistic sunglasses, helmets or conventional safety goggles. The Tac-Eye product line was sold as part of the sale of our defense division in June 2012. 5 Monocular products, due to their single eye display are best used for “information snacking”. Other monocular eyewear issues can include possible visual rivalry problems for eye dominance and focus for the user wearing them. Typically monocular products have smaller fields of view that result in less information display capability and no stereoscopic 3D or depth information. Binocular Video Eyewear products overcome these issues and are the best choice in many applications. For the industrial research sector in the fourth quarter of 2013 we began selling our first waveguide based HMD that is fully enabled for AR use. The M2000AR has tracking sensors, hi- resolution camera, HDMI interface, and see through waveguide based optics that can be mounted to hardhats or goggles. In early 2014 we began selling our first monocular pair of Smart Glasses, the M100. Designed for the enterprise, industrial and commercial markets, our focus has been on the developer community and customers in the enterprise and medical markets. We have been attempting to create an eco-system around the M100 developer community. Major corporate partners like SAP, AT&T, NTT Docomo, HP, DHL and others have been particularly active. We also created an M100 app store with a growing list of applications and tools to enable application development. Future versions will include increased resolutions, more powerful computers and our thin waveguide see-through optics. Two new models of our monocular Smart Glasses products were introduced and prototype models shown at the January 2016 CES. The M300 and the M3000 Monocular Waveguide Smart Glasses. The M300 is an updated design with enhanced functionality and wearability to follow on the popular Vuzix M100. The new Vuzix M300 is not a departure from the M100 product, but rather a next generation model with significantly improved ergonomics and technical features, such as hot swappable batteries, Intel Atom processor running Android 6.0, and much more, all in a ruggedized form designed specifically for enterprise and industrial use. The second model, the M3000 was honored at CES 2016 for its innovative design and engineering, and is our next-generation waveguide based wearable eyewear for the enterprise sector. The M3000 features improved display resolution and employs our advanced waveguide optics that allow see through operation for more advanced augmented reality applications. Both of these smart glasses can connect to the cloud to deliver digital content directly to and from the job site and connecting it “overlaid” onto the real world. Virtual Reality Products Virtual Reality (VR) Video Eyewear products provide a user with 3D computer simulated environments that can simulate the real or an imaginary world. By definition, VR Products are binocular so they can provide an immersive 3D world view for the user. Our prior VR product, the Wrap 1200DX VR, was the fourth generation of our VR Video Eyewear. These Virtual Reality products contain “three degrees of freedom” head tracking technology, which enables the user to look around the environment being viewed by moving his or her head. Today VR is primarily used for game playing, interactive 360 videos, training and simulations. In December 2015, we began shipments of the Vuzix iWear Video Headphones which includes support for VR applications. It was the winner of four CES 2015 awards. The iWear features dual HD Displays and revolutionary nano-optics that provide the equivalent experience of a 125" home television from 10 feet and allow the wearer to play games, interact with apps, watch 2D, 3D and 360°VR movies and even fly drones. iWear is completely portable and battery-driven so that the user can enjoy it at home or on-the-go and it delivers a one-of-a-kind experience. At CES 2016, a wireless version of the iWear Video Headphones was demonstrated. The product was awarded as the Winner of the “Best of” in Gaming and Virtual Reality. The iWear Wireless requires no cable, runs Android 5.0 and is compatible with thousands of applications and was viewed as the ultimate in wearable video entertainment and gaming system at the CES show. Augmented Reality Products Augmented Reality Products provide a user a live, direct or indirect, view of a physical, real-world environment whose elements are augmented by computer generated sensory input such as sound, video, graphics or GPS data. It is designed to plug into a computer’s USB and HDMI video port. It also contains head tracking technology, which enables the user to look around the environment being viewed by moving his or her head which in turn sends that information back to the computer which then adjusts the computer generated AR image accordingly. Our prior AR products included the Wrap 1200DX-AR and STAR 1200DX, both of which were phased out in the second quarter of 2015. 6 The STAR 1200DX is our second AR Video Eyewear product with see-through technology that enables the user to see the real world directly through and around its transparent WVGA widescreen video displays. With the built in sensors and a high performance HD camera, computer content, such as text, images and video can be overlaid and connected to the real world with the see through displays in full color 2D or 3D. This product was primarily used by individual researchers and AR software developers. A new replacement see- through AR product should be available in late 2016 that will incorporate our see-through waveguide optics and a built-in computer that will eliminate the need for an external computing device to create the virtual AR objects. Our M100 Smart Glasses, are an intelligent wearable computing systems specifically designed to enable computing and augmented reality cloud connected information to the real world. We received an Innovations Design and Engineering Award for the M100 Smart Glasses at the January 2014 Consumer Electronics Show. The M100 is a wearable “hands free display” designed for the enterprise markets. The M100 Smart Glasses include a small display, camera, compass, motion-tracker, GPS and audio system for wirelessly connecting via Bluetooth or Wi-Fi. The embedded camera in the Smart Glasses are used for recording and/or seeing the real world. Additionally the camera enables a variety of AR applications. Input and control of the M100 consists of using the wirelessly connected smartphone, gesture sensor, and speech recognition voice control or gesture sensor. Finally, as the M100 runs the standard Android OS, Ice Cream Sandwich version, it is compatible with thousands of existing titles “out of the box” and it allows for fast and easy third party applications to be developed, sold and downloaded to run directly in the M100 Smart Glasses. We are building an eco-system of developers around these smart glasses and anticipate that most of the software being developed can be used on future generations of our smart glasses. At the January 2016 Consumer Electronics trade show, we also won an innovation award for the prototype of our B3000 series of binocular Smart Glasses technology. This new technology, based on our proprietary see-through waveguide optics and HD display technology, is designed to fit into the frames of designer-styled glasses. We intend to introduce binocular Smart Glasses within the next 12 months using this technology. These new smart glasses will allow users to see and augment the real world as if looking through a conventional pair of fashionable eyeglasses. Again, because this product will run the Android operating system and is built upon the eco- system we are building for the M100, a significant base of applications should already exist for them when we launch and newly developed applications will be easily enabled using these advanced AR functions. Cloud or internet-connected Smart Glasses applications are being created for manufacturing, medical, field maintenance and repair, training, gaming and social media uses for both our monocular and binocular smart glasses product lines. Custom Solutions and Engineering Solutions We have in the past provided full optics systems, including head mounted displays, human computer interface devices, near-eye display related engineering services and wearable computers to commercial, industrial and defense customers. As a result of the sale our defense division in June 2012, we no longer pursue general engineering services work with defense or security organizations. In early 2015, we completed our last U.S. Navy Research labs waveguide engineering contract and have no active programs with the U.S. Department of Defense. Technology We believe that it is important to make substantial investments in research and development to maintain our competitive advantage. The development and procurement of intellectual property rights relating to our technologies is a key aspect of our business strategy. We believe that it is now technologically feasible to improve upon the weight, ergonomics, optical performance, see-through capabilities, luminance, power efficiency, compactness, field of view and resolution of the current generation of virtual displays and display components. “Early technology adopters” have been the majority of the purchasers of our consumer Video Eyewear products to date. However, our near-to-eye virtual display technology has been gradually improving in performance and we believe will soon meet the high expectations of both the enterprise and the consumer mass markets with respect to screen resolution, computer power, image size and ergonomics. We expect to continue to improve our products through our ongoing research and development and advancements made by our third party suppliers of key components. 7 We also develop intellectual property through our ongoing performance under engineering service contracts. We intend to continue to pursue select development contracts for applications that enhance our waveguide optics and other display technology. Our policy is to retain our proprietary rights with respect to the principal commercial applications of our technology under any engineering services work we perform, whenever possible. During 2015 and 2014, we spent $3,595,437 and $1,752,560, respectively, on research and development activities. We expect to increase our research and development expenditures in the future as our revenues grow. We have also acquired and licensed technologies developed by third parties and we may do so in the future. We believe that the range of our proprietary technologies gives us a significant competitive advantage. Our technologies relate to advanced optics systems including passive and active see-through imaging waveguides; micro-projection display engines; high resolution scanning displays; motion tracking systems; and specialized software drivers and applications for video eyewear displays. We also have a portfolio of trade secrets and expertise in nano-imprinting using quartz mold substrates, Nano structure UV (ultra violet) embossing, and engineering tool sets for the design and manufacturing of diffractive waveguide optics. We believe that display engines are also important for commercializing wearable displays. We are developing proprietary micro DLP based engines and laser modulated engines designed specifically for our waveguide optics solutions. These engines will allow fuller vertical integration of our supply chain which we believe will help us obtain a strong competitive advantage. We completed t commercialization of the waveguide technologies for our first product, the M2000 in 2014. We have since been focusing our efforts on the next generation waveguides and display engines that will shrink the entire assembly to a module that will fit in typical off-the-shelf sports sunglasses. We anticipate launching several new waveguide based products in 2016 and 2017. In August 2011, we entered into a technology license agreement with Nokia Corporation for their Exit Pupil Expanding (EPE) optics technology. Under the agreement, we perform on-going research and development on the EPE optics and are expected to manufacture and bring to market components and products containing the licensed technology. In addition, we will provide Nokia with the ability to purchase products and components which incorporate the licensed technology. Major technologies that we employ in our products include: Hardware Technology Virtual Display Technology (including Lens Technology and Optics Assemblies) Microdisplay optics represent a significant cost of goods for both us and our competitors. This cost is a function of the physical size of the microdisplay and the cost of the supporting optics. Smaller microdisplays are less expensive to produce but they require larger and more sophisticated optics to make near-eye systems that have no user adjustments, large fields of view and very low distortion specifications. Larger displays require less magnification and less complex optics, but the optics become very bulky and the displays are significantly more expensive to manufacture. To improve our Video Eyewear’s fashion and ergonomics, we are developing thin and lightweight optics that can be integrated with very small microdisplays that we expect will match conventional eyewear frames in size and weight. These new optics and displays provide what we believe are significantly improved ergonomics compared to competing wearable virtual displays. See-Through Waveguides: We are developing both passive and dynamic waveguide optics that are the basis for our future slim wearable Video Eyewear displays. Our dynamic waveguides use index modulated liquid crystal material to switch beam steering gratings built in a thin glass window to scan an image into the user’s eye. We are also developing passive optical display engine that uses a 1.4 mm thick see-through blade of glass or plastic with an ultra-compact micro display engine to magnify and focus the light from a display into a user’s eye. We have established that this technology performs to HD standards but thus far sold only limited quantities of products that incorporate waveguides. We will introduce new waveguide based products in 2016. We are now on a path to improve the waveguide’s performance to provide larger fields of view and better optical efficiency. Wearable Video Eyewear incorporating these engines will appear to others as practically indistinguishable from today’s conventional sunglasses by most every measure, including comfort, size, weight and ergonomics. We have filed patent applications with respect to this technology. We have also entered into a technology license agreement with Nokia Corporation for their Exit Pupil Expanding (EPE) optics technology. 8 Custom Display Engines: We have patents and patents pending on modulated laser based display engines and IP around micro DLP display engines. The micro DLP engine is one of the smallest volume engines built around DLPs and the laser engine is being design for use with next generation waveguides capable of 90 plus degree fields of view. Both the display engine and waveguide optic combine into a single monolithic design that we believe will enable us to produce low cost, HD resolution displays in a form factor that will be integrated into frames similar in size to ordinary sunglasses. We have successfully prototyped both monochrome and color versions of the DLP engine and our upcoming M3000 Smart Glasses will use this engine. Nanoimprinting: We continue to develop a portfolio of trade secrets and expertise in nanoimprinting. From quartz substrate molds with unique nano-structured grating surfaces built into them to ultra violet (UV) embossing, and engineering tool sets for the design of diffractive waveguide optics. These trade secrets deal with the manufacture of molds through to volume production UV embossing. We believe these technologies are essential to the production of our 1.4 mm thick see through lenses which we believe are the cornerstone to making fashionable eyeglass styled Smart Glasses. Patents and other Intellectual Property We have an intellectual property policy which has as its objectives: (i) the development of new intellectual property to further our intellectual property position in relation to personal display technology; and (ii) the maintenance and protection of our valuable trade secrets and know-how. We seek to further achieve these objectives through the education and training of our engineering staff and the adoption of appropriate systems, policies and procedures for the creation, identification and protection of intellectual property. Our general practice is to file patent applications for our technology in the United States, Europe and Japan, and in additional countries, including Canada, Russia and China for inventions which we believe have the greatest potential. We file and prosecute our patent applications in pursuit of the most extensive fields of protection possible including, where appropriate, the application of the relevant technology to the broader display industry. We believe that our intellectual property portfolio, coupled with our key supplier relationships and accumulated experience in the personal display field, gives us an advantage over potential competitors. We also believe our copyrights, trademarks, and patents are critical to our success, and we intend to maintain and protect these. We also rely on proprietary technology, trade secrets, and know-how, which are not patented. To protect our rights in these areas, we require all employees and, where appropriate, contractors, consultants, advisors and collaborators, to enter into confidentiality, invention assignment and non-competition agreements. Our technologies enable us to provide low-cost, small form factor, high-resolution Video Eyewear products. To protect our technologies, we have developed a patent portfolio which currently consists of 40 issued U.S. and foreign patents and 23 pending U.S. and foreign patent applications. We are also currently preparing several invention disclosures for the purposes of submitting design and utility patent applications. Our U.S. and foreign patents will expire on various dates from May 13, 2017 to October 13, 2031. In addition, in connection with our sale of our defense division in 2012, we received a worldwide, royalty free, assignable grant-back license to all the patents and other intellectual property sold for use in the manufacture and sale of products in the consumer markets. In addition to our various patents, we have eight registered U.S. trademarks, 42 trademark registrations worldwide and two pending international trademark applications. Competitors and Competitive Advantage The personal display industry in which we operate is highly competitive. We compete against both direct view display technology and near-eye display technology. We believe that the principal competitive factors in the personal display industry include image size, image quality, image resolution, power efficiency, manufacturing cost, weight and dimension, feature implementation, ergonomics and, finally, the interactive capabilities of the overall display system. 9 Most of our competitors’ products for mobile use are based on direct view display systems in which the user views the display device, or screen, directly without magnification. These products have several disadvantages compared to near-eye virtual displays and our wearable Video Eyewear products. If the screens are large enough to read a full conventional internet page or HD video without external magnification or image zooming, the products must be large and bulky, such as laptops, tablets, personal computers. If the displays are small, such as those incorporated in smartphones and smart watches, the screens can be difficult to read when displaying higher resolution content. Despite the limitations of direct view personal displays, smartphones and now smart watches are being produced in ever increasing volumes by a number of manufacturers, including Google (Alphabet), Nokia Corporation, Sony Ericsson Mobile Communications AB, Blackberry, Samsung Electronics Co., Ltd., LG Electronics Apple Inc. (Apple), Pebble, Qualcomm, Chinese based and focused firms, and others. We expect that these large and well-funded companies, as well as newer entrants into the marketplace, will make products that are competitive with ours based on improvements to their existing direct view display technologies or on new technologies. Examples of new display technology include foldable displays, e-ink, flexible OMLEDs and Qualcomm’s mirasol reflective technology called IMOD. The displays on the latest smart phone and tablets provide very high resolution and are proving effective as mobile direct view personal displays for a variety of applications, including many that were once considered applications where Video Eyewear was superior. Additionally the introduction of smart phone holders in goggle worn systems like the Samsung Gear VR, provide yet another view for users to get a very large screen experience from a 5 to 6” smart phone screen. Aside from direct view displays, we also have competitors who produce near eye personal displays, or Video Eyewear. For the past decade most of such products were mainly low-resolution, bulky in size, poor ergonomically, costly, and heavy in their power requirements. We believe that most of our competitors’ near eye products have had inferior optics, marginal electronics and poor industrial design and that, as a result, our Video Eyewear products are superior to many of our competitors’ in both visual performance and ergonomics. Competition - Binocular Video Eyewear Products Today, there are few companies that compete with Vuzix in the binocular Video Eyewear space using microdisplays; they include Carl Zeiss, Seiko Epson (Epson), Sony, and Acupix. Carl Zeiss introduced its first model called the Cinemizer several years ago and has updated to OLED displays but has restricted its sales primarily to Germany thus far. It was discontinued by that firm in mid-2015. Epson and Sony are both selling products that look like the larger head mounted displays from 10 to 15 years ago. Epson ships their “Moverio” HMD and Sony introduced their “HMZ” HMD late in 2011 for home or fixed location use. Sony decided in the spring of 2015 to discontinue their HMZ product line and has moved its focus to developing a VR goggle system for its PlayStation 4 game console, which will ship commercially in October 2016. We believe neither of these competitive products were received well in the market place due to their bulky and non-user-friendly designs. Brother International also began marketing a see-through HMD on a very limited basis in Japan in late 2011. In the fall of 2012, Acupix of Korea introduced a WVGA video eyewear model with HDMI inputs, but it lacks support for legacy video devices and user optical adjustments. In early January 2014, TDG Acquisition Company, LLC (the purchaser of our defense division, now operating as Six-15 Technologies) announced its new Tac-Eye AR line of see-through AR products for its target marketplaces. A new entity, Oculus has been shipping developer kits for its large field of view VR goggle HMD called the Oculus Rift and has announced that a new model will be available for consumers in 2016. Further there are head worn goggle attachments for smart phones, like the Samsung Gear VR and the Carl Zeiss VR One which can offer an inexpensive way for owners of compatible smart phones to experience virtual reality. We believe all these unit are very bulky relative to the wearer’s head, offer only limited resolution to each eye, and often have less than clear optical performance across their viewing area. We expect that, as the market grows and matures and as the technology becomes more refined, more companies may compete with us. There are a number of smaller companies that have products that compete with our Video Eyewear products. In the past they have generally used binocular display module (BDM) produced by Kopin Corporation. Kopin offers binocular display modules of varying resolutions to original equipment manufacturers (or OEMs). Those modules are designed for easy customization by OEMs and include microdisplays, backlights, optics and optional drive electronics. Similar products are offered by other microdisplay manufacturers. The availability of those BDMs has greatly reduced the investment required for new competitors to enter the business. Currently, Kopin BDMs are primarily used by Asian-based Video Eyewear manufacturers. There are also several Chinese companies offering what we believe are inferior solutions in this market, but we believe their distribution in North America and Europe is limited. Other microdisplay manufacturers may also introduce BDM modules built around their products. We believe that the products produced by those manufacturers have one or more of the deficiencies described above. Kopin does not currently compete with Vuzix at the retail level. Kopin is also our primary supplier of microdisplays. 10 In 2010, our previous largest competitor, MyVu, ceased operations. Its intellectual property assets were sold to unnamed parties in Asia. Other companies that have stated their intention to enter this market when their product development is complete are Lumus and Microvision Corporation. At recent CES tradeshows, Lumus demonstrated a see-through HD optics engine in a pair of Video Eyewear. They have not yet announced a product that is production ready. Microvision has also announced that they are currently focused on the Pico projection markets, as described below, and that they are not planning to introduce a wearable display solution. Another product incorporating recently developed technology is a handheld projector that utilizes micro-displays and optics to project digital images onto any nearby viewing surface, such as a wall. These devices are referred to as pocket projectors or pico projectors and are designed to overcome the limitations of the native small screen on smartphones and other mobile devices. Pico projectors use either liquid crystal on silicon displays (LCOS) or color lasers to create their image. We believe pico projectors have had higher unit sales to date than Video Eyewear primarily because of their cost advantage and higher resolutions. In the VR and AR markets, there are few competitors in the consumer space with effectively no competition in all but the very high- end researcher market. Oculus is still just selling a developers’ kit of its fully immersive VR head mounted display, and both Cinemizer and Sony have announced their intent to offer upgrades to their new products for virtual reality applications. Seiko Epson added a camera to their see-through Moverio BT-200 smart glasses in 2015 which now allows it to be used and for AR purposes. And while today’s VR applications are primarily PC based entertainment applications, Sony has demonstrated a fully immersive VR HMD for its PlayStation 4game console with an expected release date in mid-2016. HTC in conjunction with the software developer Valve, have announced their full immersive VIVE virtual reality system for use with Valve’s Steam VR system. This product is expected to be available in 2016. Further, industry bloggers have speculated that companies such as Apple and Microsoft may offer or support AR Video Eyewear products in the near future. In January 2015 Microsoft publicly demonstrated its Hololens AR system, but no specific product launch details have been officially announced. Competition - Monocular Video Eyewear Products Although several companies produce monocular Video Eyewear, we believe that sales of their products to date have been limited. To date, the market opportunity for monocular products other than night vision products has been limited primarily to trial tests rather than commercial volume purchases for industrial applications. Current competitors in these markets are Liteye Systems, Inc., Lumus, Shimadzu Corporation, Kopin, Zebra Technologies (inclusive of business unit formerly part of Motorola), Creative Display Systems, Brother, Google, LLC, Garmin BAE Systems, Six-15 Technologies, LLC (the purchaser of our defense division), Rockwell Collins, Inc.. Kopin has begun to aggressively promote its upcoming Golden-i that combines a speech recognition controlled head mounted computer with a monocular near-eye display and recently demonstrated several new monocular reference designs that they claim they are only licensing to OEM customers. The Motorola Solutions group introduced Golden-i in late 2012. Google has developed a wearable display device named Google Glass which is a headset product with similar form and function to our M100 Smart Glasses. In January 2015, Google stopped selling its first version of Glass. And while not officially announced, industry rumors indicate a second generation of Google Glass is now in limited test with developers. Several Japanese electronics companies including Hitachi, Toshiba, Murata, Sony and Olympus have announced monocular smart glass systems for industry and have commenced marketing and sales of these systems. We expect that we will encounter competition in the future from major consumer electronics companies and suppliers of imaging and information products for defense applications. 11 There is competition in all classes of products manufactured by us, including from divisions of large companies and many small companies. Our sales do not represent a significant share of the market for any class of products. The principal points of competition for these products include, among other factors: price, product performance, the availability of supporting applications, the experience and brand name of the particular company and history of its dealings in such products. We believe that most of the monocular Video Eyewear products currently offered by our competitors are inferior to ours because they are bulky, have smaller image sizes with lesser performing optics and/or are currently priced higher than our products. Sales and Marketing Sales We have two distinct strategies for the sales of our products. In the smart glasses and AR markets we are focused on the enterprise space and as such are building strategic marketing relationships with software firms to address and support enterprise customers. We are in parallel developing a value added reseller (VAR) network with leading companies in various vertical markets from warehousing to field service to medical. As these VARs finish their value added software and services offerings we expect them to roll out their finished solutions to their customer base. We are also supporting select larger key accounts with our in-house direct sales team. For our smart glasses we are also developing a rich eco system with application developers from around the world. We have introduced our own hosted application store where our smart glasses customers can download and purchase applications and software developer kits. We are also hosting many developer hackathon events with partners companies like NTT docomo and AT&T. On the consumer side, our products are targeted at applications including video viewing, gaming and Virtual Reality. In 2005, as our products and technology evolved, we began to sell standard Video Eyewear products for the consumer markets and have since built a multi- national sales channel with offices out of the UK and Japan that has spanned sales into over 50 countries. In 2007, we introduced Virtual Reality products and in 2010 we introduced our first Augmented Reality products. We are either currently or intending to selling our iWear Video Headphones directly to consumers and intend to expand that to select distributors, and online retailers worldwide once we are able to efficiently mass produce this product in the second quarter of 2016. As we broaden our markets we will continue to expand on these strategies for each of our target application areas and markets. Finally, we regularly attend industry trade shows in our application markets. Marketing Our marketing group is responsible for product management, planning, advertising, marketing communications, and public relations. We have an internal public relations effort in the U.S. and have retained two external public relations firms for the U.S. market. One for our consumer focused products and the other for our enterprise smart glass products. In the UK we employ a public relations firm part-time. We also employ two marketing firms to help prepare brochures, packaging, tradeshow messaging and advertising campaigns, again focused on either the consumer or enterprise markets. All our products are currently sold under the Vuzix brand name. We intend Vuzix to become known as one of the premier supplier of Video Eyewear products for video viewing and Virtual and Augmented Reality enabled Smart Glasses. We plan to undertake specific marketing activities as needed, including, but not limited to: · · · · · product reviews, case studies and promotions in trade publications; enhancement and maintenance of our Website, Web Store and Social Media sites; internet and web page advertising and targeted emails; public relations; print advertising, catalogs and point of purchase displays; and 12 · trade shows and event sponsorships. Engineering Services We primarily solicit sales of our engineering services programs directly. We believe we have established a solid reputation for quality, performance and innovation for near-eye virtual display systems that will be attractive to many types of commercial users that want to leverage our services and products within their businesses. Attendance at industry trade shows, conferences and application white papers are tools we use to generate customer interest. In regard to defense and security markets, due to the sale of our defense division in June 2012, we no longer are performing engineering work or selling products into these markets, except through the purchaser of our defense division assets. Consumer We engage in a variety of marketing efforts that are intended to drive customers to our products and to grow awareness of our AR Smart Glasses, VR products and Video Eyewear in general. Public relations are an important aspect of our marketing and we intend to continue to distribute samples of our products to key industry participants. We intend to focus our marketing efforts for the next 12 months on: · distinguishing our Video Eyewear and Smart Glasses product categories from current competitors and by offering products with superior performance and optics to that of our competitors; · working with third party software developers to support the unique capabilities of our new products; and · creating brand awareness with the press and general public of Vuzix and its products, with particular emphasis on our new forthcoming waveguide based products. Our Video Eyewear products are currently primarily sold directly to consumers and at times through select specialty retailers, online retailers such as Amazon, through catalogue offerings and through third party North American distributors including D&H. Our website, www.vuzix.com is an important part of our direct sales efforts. For resellers with physical retail locations in the United States, we have in the past offered point of purchase systems that include a video frame running a slide show presentation about the products and an integrated fully functional Video Eyewear product that allows potential customers to use our products. Where and when applicable we will create and offer new point of purchase systems for select products. We currently sell our products internationally through distributors, resellers, online stores and various Vuzix operated web stores in Europe and Japan. Our international focus is currently on Japan and the EU. In Japan, we have a branch sales and service office in Tokyo, and a small warehouse outside of Tokyo. We employ two full-time staff in Japan. In spring 2008, we created a wholly owned subsidiary, Vuzix (Europe) Limited, through which to conduct our business in the EU and Middle Eastern markets. Resellers in 50 countries placed orders with us during the last two years. We maintain a small European sales office in Oxford, England. We have also retained a sales consultant (who acts as our European Director of Operations), and a UK public relations firm. For customer support and warehousing, we have contracted with a third-party end user technical support firm and fulfillment center to service our customers in the EU. Manufacturing Currently, we purchase product components from our suppliers, engage third party contract manufacturing firms to perform electronic circuit board and cable assemblies, and have the final assembly of our products done primarily in China at our contract manufacturer there. In the past we have built products ourselves in our Rochester, New York based facility. We are experienced in the successful production of our products in moderate volumes. We expect to only perform, at most final assembly of our new Video Eyewear products ourselves on a test basis however we expect to manufacture all our waveguide optics at our West Henrietta, New York facility. 13 We currently purchase almost all of the microdisplays used in our products from Kopin and Microvision. Our relationship with these microdisplay suppliers is generally on a purchase order basis and neither firm has a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. We procure a small percentage of our microdisplays from other sources such as Syndiant and Texas Instruments. While we do not manufacture our components, we own the tooling that is used to make our custom components with the exception of certain authentication chips and connectors that may be required to support industry standard device connectivity. We believe that we are not dependent on our relationships with any supplier other than Kopin or Microvision. Kopin before we sold the defense divisions had also been a significant customer of our night vision display electronics modules and owns just under 3% of our common stock. Some of our accessory products are sourced from third parties as finished goods. We typically have them print our Vuzix brand name on these products of they are co-branded. Such third party products represented less than 5% of our sales in 2015. We generally procure our other non-microdisplay components and products from our vendors on a purchase order basis without any long-term commitments. We currently use several Asian manufacturing sources, where we have located some of our tooling. Over time, we expect to globally source almost all of our components which we believe will minimize product costs. We anticipate that procuring assembled products from third parties will result in decreased labor force requirements, capital equipment costs, component inventories, and the cost of maintaining inventories of work in progress. Employees As of March 27, 2015, we had 39 full-time employees in North America: 7 in sales and marketing, distribution, and customer service; 20 in research and development and engineering services support; 5 in manufacturing, operations and purchasing; 1 in quality assurance; and 6 in accounting, management, IT, and administration. We also work with a group of sub-contractors, mainly for industrial and mechanical design assistance in the Rochester, New York area. To further our waveguide research development we work with various commercial and academic researchers in the United Stated and Finland. In Japan, we have 2 full-time employees and in the UK we have 2 full-time and 1 part-time contractor to manage our European sales and marketing activities. History We were incorporated in Delaware in 1997 as VR Acquisition Corp. In 1997, we acquired substantially all of the assets of Forte Technologies, Inc. (Forte), which was engaged in the manufacture and sale of Virtual Reality headsets and the development of related technologies. Forte was originally owned and controlled by Kopin, our main current microdisplay supplier. Most of the technologies developed by Forte are now owned and used by us. In 1997 we changed our name to Kaotech Corporation. In 1998 we changed our name to Interactive Imaging Systems, Inc. In 2004 we changed our name to Vicuity Corporation and then to Icuiti Corporation. In 2007, we changed to our current name, Vuzix Corporation. None of these name changes were the result of a change in our ownership control. Reference in this report to “Vuzix”, the “Company”, “we,” “us,” “our” and similar words refer to Vuzix Corporation and its wholly- owned subsidiaries. Item 1A Risk Factors An investment in our securities involves a high degree of risk. An investor should carefully consider the risks described below, together with all of the other information included in this annual report, before making an investment decision. Our business, financial condition or results of operations could suffer as a result of these risks. In that case, the market value of our securities could decline, and an investor may lose all or part of his or her investment. 14 Risks Related to Our Business We have incurred net losses since our inception and if we continue to incur net losses in the foreseeable future the market price of our common stock may decline. We reported a net loss of $13,427,478 for the year ended December 31, 2015, and we reported net loss of $7,868,858 for the year ended December 31, 2014. We have an accumulated deficit of $57,588,868 as of December 31, 2015. We may not achieve or maintain profitability in the future. We will need to increase sales in order to achieve and maintain profitability. In addition, we expect that our expenses relating product development and research, sales and marketing, as well as our general and administrative costs, may increase, requiring us to increase sales in order to achieve and maintain profitability. If we do not achieve and maintain profitability, our financial condition will ultimately be materially and adversely affected and we would eventually be required to raise additional capital. We may not be able to raise any necessary capital on commercially reasonable terms or at all. If we fail to achieve or maintain profitability on a quarterly or annual basis within the timeframe expected by investors, the market price of our common stock may decline. In preparing our consolidated financial statements, our management determined that our disclosure controls and procedures and internal controls over financial reporting were ineffective as of December 31, 2015 and 2014 which could result in material misstatements in our financial statements. Our management is responsible for establishing and maintaining adequate internal control over our financial reporting, as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended, or the Exchange Act. As of December 31, 2015, our management has determined that our disclosure controls and procedures and internal control over financial reporting were ineffective because of material weaknesses including a financial reporting and close process that does not ensure accurate financial reporting on a timely basis, limited segregation of duties, lack of adequate monitoring of subsidiaries, and weaknesses in our inventory control. We intend to implement remedial measures designed to address the ineffectiveness of our disclosure controls and procedures and internal controls during our 2016 fiscal year. With the closing of our private placement of Series A Preferred Stock in January 2015 (the “Series A Private Placement”) we now have the financial resources to permit the hiring of additional staff and the development, assessment, implementation and testing of the changes in controls and procedures that we believe are necessary to conclude that the material weakness has been remediated. If these remedial measures are insufficient to address the ineffectiveness of our disclosure controls and procedures and internal controls, or if other material weaknesses or significant deficiencies in our internal control are discovered or occur in the future and the ineffectiveness of our disclosure controls and procedures and internal controls continues, we may fail to meet our future reporting obligations on a timely basis, our consolidated financial statements may contain material misstatements, we could be required to restate our prior period financial results, our operating results may be harmed, and we may be subject to class action litigation. Any failure to address the ineffectiveness of our disclosure controls and procedures could also adversely affect the results of the periodic management evaluations regarding the effectiveness of our internal control over financial reporting and our disclosure controls and procedures that are required to be included in our annual report on Form 10-K. Internal control deficiencies and ineffective disclosure controls and procedures could also cause investors to lose confidence in our reported financial information. We can give no assurance that the measures we plan to take in the future will remediate the ineffectiveness of our disclosure controls and procedures or that any material weaknesses or restatements of financial results will not arise in the future due to a failure to implement and maintain adequate internal control over financial reporting or adequate disclosure controls and procedures or circumvention of these controls. In addition, even if we are successful in strengthening our controls and procedures, in the future those controls and procedures may not be adequate to prevent or identify irregularities or errors or to facilitate the fair presentation of our consolidated financial statements. We operate in a highly competitive market and the size and resources of some of our competitors may allow them to compete more effectively than we can, which could result in a loss of our market share and a decrease in our revenue and profitability. The market for display devices, including Video Eyewear and Smart Glasses, is highly competitive. Further, we expect competition to intensify in the future as existing competitors introduce new and more competitive offerings alongside their existing products, and as new market entrants introduce new products into our markets. We compete against established, well-known diversified consumer electronics manufacturers such as Samsung Electronics Co., Sony Corporation, LG Electronics (LGE) and Toshiba Corporation, and large software and other products companies such as Google, Microsoft and Facebook. Many of our current competitors have substantial market share, diversified product lines, well-established supply and distribution systems, strong worldwide brand recognition and greater financial, marketing, research and development and other resources than we do. In addition, many of our existing and potential competitors enjoy substantial competitive advantages, such as: 15 · · · · · · · longer operating histories; the capacity to leverage their sales efforts and marketing expenditures across a broader portfolio of products; broader distribution and established relationships with channel partners; access to larger established customer bases; greater resources to make acquisitions; larger intellectual property portfolios; and the ability to bundle competitive offerings with other products and services. Moreover, smartphones, tablets and new wearable devices with ever growing larger video display screens and computing power have significantly improved the mobile personal computing experience. It is possible that, in the future, the manufacturers of these devices, such as Apple Inc., Samsung, LGE, Fitbit, Garmin, Microsoft and others may design or develop products similar to ours. In addition to competition or potential competition from large, established companies, new companies may emerge and offer competitive products. Increased competition may result in pricing pressures and reduced profit margins and may impede our ability to increase the sales of our products, any of which could substantially harm our business and results of operations. Our lack of long-term purchase orders and commitments from our customers may lead to a rapid decline in our sales and profitability. All of our customers issue purchase orders solely in their own discretion, often shortly before the requested date of shipment. Our customers are generally able to cancel orders (without penalty) or delay the delivery of products on relatively short notice. In addition, our current customers may decide not to purchase products from us for any reason. If those customers do not continue to purchase our products, our sales volume and profitability could decline rapidly with little or no warning. We cannot rely on long-term purchase orders or commitments to protect us from the negative financial effects of a decline in demand for our products. We typically plan our production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. The uncertainty of product orders makes it difficult for us to forecast our sales and allocate our resources in a manner consistent with our actual sales. Moreover, our expense levels and the amounts we invest in capital equipment and new product development costs are based in part on our expectations of future sales and, if our expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. Furthermore, because we have historically often depended on a small number of customers for the majority of our sales, the ramifications of these risks is greater than if we had a greater number of customers. As a result of our lack of long-term purchase orders and purchase commitments, we may experience a rapid decline in our sales and profitability. As a result of these and other factors, investors should not rely on our revenues and our operating results for any one quarter or year as an indication of our future revenues or operating results. If our quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of our common stock could fall substantially. 16 If we do not effectively maintain and further develop our sales channels for our products, including developing and supporting our retail sales channel, value added resellers (VARs) and distributors, our business could be harmed. We depend upon effective sales channels to assist us in reaching the customers who are the ultimate purchasers of our Video Eyewear and Smart Glass products. In the United States, we primarily sell our products directly from our in-house sales team, our website, VARs and for our more consumer focused products through a mix of specialty retailers and online stores, some of which we reach certain U.S. markets through distributors. In international markets, we primarily sell directly to consumers, enterprises, VARs or occasionally through distributors who in turn sell to local retailers. Our distributors and VARs generally offer products from several different manufacturers. Accordingly, we are at risk that these distributors and VARs may give higher priority to selling other companies’ products. If we were to lose the services of a distributor or VAR, we might need to find another in that area, and there can be no assurance of our ability to do so in a timely manner or on favorable terms. Further, our distributors can at times build inventories in anticipation of future sales, and if such sales do not occur as rapidly as they anticipate, our distributors will decrease the size of their future product orders. We are also subject to the risks of our distributors and VARs encountering financial difficulties, which could impede their effectiveness and also expose us to financial risk if they are unable to pay for the products they purchase from us. Any reduction in sales by our current distributors or VARs, loss of key distributors and VARs or decrease in revenue from our distributors and VARs could adversely affect our revenue, operating results and financial condition. Our future growth and profitability may be adversely affected if our marketing initiatives are not effective in generating sufficient levels of brand awareness. Our future growth and profitability from our consumer and enterprise products will depend in large part upon the effectiveness and efficiency of our marketing efforts, including our ability to: · · · · create awareness of our brand and products; convert consumer awareness into actual product purchases; effectively manage marketing costs (including creative and media) in order to maintain acceptable operating margins and return on marketing investment; successfully offer to sell our products or license our technology to third party companies for sale under their own brand name as OEM partners; Our planned marketing expenditures may not result in increased total sales or generate sufficient levels of product and brand name awareness. We may not be able to manage our marketing expenditures on a cost-effective basis. If we fail to accurately forecast seasonal demand for our consumer Video Eyewear products, our results of operations for the entire fiscal year may be materially adversely affected. Historically, a high percentage of our consumer Video Eyewear product annual sales have been attributable to the winter holiday selling season. Like many manufacturers of consumer electronics products, we must make merchandising and inventory decisions for the winter holiday selling season well in advance of actual sales. Further compounding the difficulty of this forecasting are other fluctuations in demand for the consumer electronics products that work with our Video Eyewear products, often due to the same seasonal influences, as well as technological advances and new models which are often introduced later in the calendar year. Inaccurate projections of demand or deviations in the demand for our products may cause large fluctuations in our fourth quarter results and could have a material adverse effect on our results of operations for the entire fiscal year. In contrast, a substantial portion of our expenses are personnel related and include salaries, stock-based compensation, benefits and research and development expenses, which are not seasonal in nature. Accordingly, in the event of revenue shortfalls, we are generally unable to mitigate the negative impact on our results from operations in the short term. 17 Our products require ongoing research and development and we may experience technical problems or delays, which could lead our business to fail. Our research and development efforts remain subject to all of the risks associated with the development of new products based on emerging and innovative technologies, including, for example, unexpected technical problems or the possible insufficiency of funds for completing development of these products. If we experience technical problems or delays, further improvements in our products and the introduction of future products could be delayed, and we could incur significant additional expenses and our business may fail. We depend on advances in technology by other companies and if those advances do not materialize, some of our anticipated new products could be delayed or cancelled. We rely on and will continue to rely on technologies (including microdisplays) that are developed and produced by other companies. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies. We may, from time to time, contract with and support companies developing key technologies in order to accelerate the development of them for our specific uses. Such activities might not result in useful technologies or components for us. We are attempting to mitigate this risk by exploring ways to develop our own microdisplay technologies using LED scanning displays, but there can be no assurance that we will be successful in doing so. If we fail to keep pace with changing technologies or are unable to anticipate customer preferences, our business and results of operations may be materially adversely affected. Rapidly changing customer requirements, evolving technologies and industry standards characterize the consumer electronics, wireless phone, and display industries. To achieve our goals, we need to enhance our existing products and develop and market new products that keep pace with continuing changes in industry standards, requirements and customer preferences. Our success depends on our ability to identify and originate product trends as well as to anticipate and react to changing customer demands in a timely manner. If we are unable to introduce new products or novel technologies in a timely manner or our new products or technologies are not accepted by customers, our competitors may introduce more attractive products, which could hurt our competitive position. Our new products might not receive customer acceptance if their preferences shift to other products, and our future success depends in part on our ability to anticipate and respond to these changes. Failure to anticipate and respond in a timely manner to changing customer preferences could lead to, among other things, lower revenue and excess inventory levels. As we continually seek to enhance our products, we may incur additional costs to incorporate new or revised features. We might not be able to, or determine that it is not in our interests to, raise prices to compensate for these additional costs. If microdisplay-based personal displays do not gain some reasonable level of acceptance in the market for mobile displays, our business strategy may fail. The mobile display market is dominated by displays larger than one-inch, most of which are based on direct view liquid crystal display, or LCD and organic light emitting display, or OLED technology. A number of companies have made and continue to make substantial investments in, and are conducting research to improve characteristics of, small direct view LCDs. Many of the leading manufacturers of these larger direct view LCDs, including LG Electronics, Royal Philips Electronics, Samsung Electronics Co., Ltd., Sony Corporation, HiMax, Omnivision, Citizen, and Sharp Corporation, are large, established companies with global marketing capabilities, widespread brand recognition and extensive financial resources. Advances in direct view LCD and OLED technology or other technologies may overcome their current limitations and permit them to remain or become more attractive technologies for personal viewing applications, which could limit the potential market for our Video Eyewear technology and cause our business strategy to fail. 18 Another product incorporating recently developed technology is a handheld projector that utilizes microdisplays and optics to project digital images onto any nearby viewing surface, such as a wall. These devices are referred to as pocket projectors or Pico projectors and are designed to overcome the limitations of the native small screen on smartphones and other mobile devices. As a result we view Pico projector as an competitive alternative to our mobile displays. Pico projectors use either liquid crystal on silicon displays (LCOS), digital light processing displays (DLP) or color lasers to create their image. To date, we believe Pico projectors have had higher unit sales than Video Eyewear primarily because of their cost advantage, which results from their requiring only a single display. Pico projectors have recently been incorporated into cellular phones in an effort to produce a shareable large screen that is easier to view. Recently introduced head worn goggle attachments for smart phones, like the Samsung Gear VR, the Carl Zeiss VR One and the Google Cardboard can offer an inexpensive way for owners of compatible smart phones to experience virtual reality by taking advantage of the smart phone’s display. These systems require pre-formatted video content and simple optics, to allow the wearer to view the screens less than 1” for the wearer’s eyes. It is difficult to assess or predict with any certainty the potential size, timing and viability of market opportunities for our microdisplay-based Video Eyewear products or their level of market acceptance. Market acceptance of Video Eyewear technology will depend, in part, upon consumer acceptance of near-to-eye displays and upon microdisplay technology providing benefits comparable to or greater than those provided by alternative direct view display technology at a competitive price. Video Eyewear products work best when used close to the eye, which may not be acceptable to consumers. Such acceptance may depend on the relative complexity, reliability, usefulness and cost-effectiveness of our near-eye display products compared to other display products available in the market or that may be developed by our competitors. In addition, our products are not designed for a shared experience amongst multiple viewers at the same time. Potential customers may be reluctant to adopt our Video Eyewear products because of concerns surrounding perceived risks relating to use and the fact that it is a new technology. If consumers fail to accept near-to-eye displays in the numbers we anticipate or as soon as we anticipate, the sales of our Video Eyewear products and our results of operations would be adversely affected and our business strategy may fail. There are a number of competing providers of microdisplay-based personal display technology, including smart glasses, and we may fail to capture a substantial portion of the personal display market. In addition to competing with direct view displays, we also compete with microdisplay-based personal display technologies that have been developed by other companies. Our primary personal display competitors include Carl Zeiss, Inc., Sony, Epson, Google, Brother International, 5DT Inc., eMagin Corporation, Oculus VR (Facebook), Kopin Corporation (Kopin), MicroVision, Inc. (Microvision), Lumus Ltd. (Lumus), Kaiser Electro Optics Inc., Toshiba, Garmin, HTC Value, TDG Acquisition Company, LLC, and Accupix of Korea. Oculus, which was purchased by Facebook in March 2014, intends to introduce a very wide field of view head-worn goggle system in spring 2016. Samsung since September 2014 has been shipping a head worn goggle frame, called the Gear VR which allow users to mount their smart phones inside it to create an Oculus content compatible immersive VR system. There are similar smart phone mounting and viewing systems now available from a variety of manufactures ranging from simple ones like the Google Cardboard which can turn most smart phones into a display device to view basic interactive VR content, to more advanced systems similar to the Samsung Gear VR. Numerous other start-up companies have announced their intentions to offer AR smart glass and VR products and developer kits in the near future. In 2015 Razer demonstrated its Open-Source VR Gaming head worn goggle system similar to the Oculus developer kit, and Carl Zeiss demonstrated its VR One, a head worn goggle for existing smart phones with larger direct view screens for VR applications, like the Samsung Gear VR. Further, industry blogs have speculated that companies such as Apple may offer or support VR and AR Video Eyewear products in the near future. In January 2015, Microsoft introduced its Hololens project, a head worn AR smart glass helmet with transparent holographic optics. No pricing, technical details, or formal release date has been released other than developer kits now being available to select developers. Another new company, Magic Leap says it is working on a head-mounted virtual display system for AR applications, however no details have been public regarding its technical capabilities or release date. 19 The Gear VR, Zeiss VR One, and even Google Cardboard utilize the wearer’s existing smart phone rather than microdisplays, which reduces the cost of these VR systems substantially, assuming the customer already owns the compatible smart phone. Most of our competitors have greater financial, marketing, distribution and technical resources than we do. Moreover, our competitors may succeed in developing new microdisplay-based personal display technologies and near-eye products that are more affordable or have more or more desirable features than our technology. If our products are unable to capture a reasonable portion of the personal display market, our business strategy may fail. Our business and products are subject to government regulation and we may incur additional compliance costs or, if we fail to comply with applicable regulations, may incur fines or be forced to suspend or cease operations. Our products must comply with certain requirements of the U.S. Federal Communications Commission (FCC) regulating electromagnetic radiation in order to be sold in the United States and with comparable requirements of the regulatory authorities of the European Union, or EU, China and other jurisdictions in order to be sold in those jurisdictions. Our smart glasses products include wireless radios and receivers which require additional emission testing. We are also subject to various environmental laws and governmental regulations related to toxic, volatile, and other hazardous chemicals used in the third party components incorporated into our products, including the Restriction of Certain Hazardous Substances Directive, or RoHS and the EU Waste Electrical and Electronic Equipment Directive, or the WEEE Directive, as well as the implementing legislation of the EU member states. This directive restricts the distribution of products within the EU that exceed very low maximum concentration values of certain substances, including lead. Similar laws and regulations have been passed or are pending in China, South Korea, Norway and Japan and may be enacted in other regions, including in the United States, and we are, or may in the future be, subject to these laws and regulations. We believe that all our current products comply with the regulations of the jurisdictions in which they are sold. From time to time, our products are subject to new domestic and international requirements. Compliance with regulations enacted in the future could substantially increase our cost of doing business or otherwise have a material adverse effect on our results of operations and our business. Any inability by us to comply with regulations in the future could result in the imposition of fines or in the suspension or cessation of our operations or sales in the applicable jurisdictions. Any such inability by us to comply with regulations may also result in our not being permitted, or limit our ability to ship our products, which would adversely affect our revenue and ability to achieve or maintain profitability. Although we have policies and procedures in place requiring our contract manufacturers and major component suppliers to comply with the RoHS Directive requirements, we cannot assure you that our manufacturers and suppliers consistently comply with these requirements. In addition, if there are changes to these or other laws (or their interpretation) or if new similar laws are passed in other jurisdictions, we may be required to re-engineer our products to use components compatible with these regulations. This re-engineering and component substitution could result in additional costs to us or disrupt our operations or logistics. The WEEE Directive requires electronic goods producers to be responsible for the collection, recycling and treatment of such products. Changes in interpretation of the directive may cause us to incur costs or have additional regulatory requirements to meet in the future in order to comply with this directive, or with any similar laws adopted in other jurisdictions. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, substantial product inventory write-offs, reputational damage, penalties and other sanctions, which could harm our business and financial condition. We also expect that our products will be affected by new environmental laws and regulations on an ongoing basis. To date, our expenditures for environmental compliance have not had a material impact on our results of operations or cash flows and, although we cannot predict the future impact of such laws or regulations, they will likely result in additional costs and may increase penalties associated with violations or require us to change the content of our products or how they are manufactured, which could have a material adverse effect on our business and financial condition. Our products may be subject to future health and safety regulations that could increase our development and production costs. Products incorporating microdisplays and wearable computers could become subject to new health and safety regulations that would reduce our ability to commercialize these near-eye display products. Compliance with any such new regulations could increase our cost to develop and produce products using the microdisplay display engine and adversely affect our financial results. 20 Regulations related to conflict minerals may cause us to incur additional expenses and could limit the supply and increase the costs of certain metals used in the manufacturing of our products. As a public company, we are subject to requirements under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, that require us to diligence, disclose and report whether or not our products contain conflict minerals. The implementation of these new requirements could adversely affect the sourcing, availability and pricing of the materials used in the manufacture of components used in our products. In addition, we have and will continue to incur additional costs to comply with the disclosure requirements, including costs related to conducting diligence procedures to determine the sources of conflict minerals that may be used or necessary to the production of our products and, if applicable, potential changes to products, processes or sources of supply as a consequence of such verification activities. It is also possible that we may face reputational harm if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to alter our products, processes or sources of supply to avoid such materials. Our products will likely experience rapidly declining unit prices and we may not be able to offset that decline with production cost decreases or higher unit sales. In the markets in which we compete, prices of established consumer electronics display products tend to decline significantly over time. In order to maintain our profit margins over the long term, we believe that we will need to continuously develop product enhancements and new technologies that will either slow price declines of our products or reduce the cost of producing and delivering our products. While we anticipate many opportunities to reduce production costs over time, we may not be able to reduce our component costs. We expect to attempt to offset the anticipated decrease in our average selling price by introducing new products, increasing our sales volumes or adjusting our product mix. If we fail to do so, our results of operations will be materially and adversely affected. If we cannot obtain and maintain appropriate patent and other intellectual property rights protection for our technology, our business will suffer. The value of our personal display, smart glasses and related technologies is dependent on our ability to secure and maintain appropriate patent and other intellectual property rights protection. We intend to continue to pursue additional patent protection for our new products and technology. Although we own many patents covering our technology that have already been issued, we may not be able to obtain additional patents that we apply for, our patents may be found invalid if challenged and our patents may not afford the degree of protection that we desire or require. Any patent or trademark owned by us may be challenged and invalidated or circumvented. Patents may not issue from any of our pending or future patent applications. Any claims and issued patents or pending patent applications may not be broad or strong enough to adequately protect our business. Effective intellectual property protection may be unavailable or limited in certain foreign countries. Unauthorized parties may attempt to copy or otherwise use aspects of our processes and products that we regard as proprietary. Policing unauthorized use of our proprietary information and technology is difficult and our efforts to do so may not prevent misappropriation of our technologies. We may become engaged in litigation to protect or enforce our patent and other intellectual property rights or in International Trade Commission proceedings to abate the importation of goods that would compete unfairly with our products and, if unsuccessful, these actions could result in the loss of patent or other intellectual property rights protection for the key technologies on which our business strategy depends. We rely in part on unpatented proprietary technology, and others may independently develop the same or similar technology or otherwise obtain access to our unpatented technology. We require employees, consultants, financial advisors, suppliers and strategic partners to enter into confidentiality agreements, but these agreements may not provide sufficient protection for our trade secrets, know- how or other proprietary information 21 Our products could infringe on the intellectual property rights of others. Companies in the consumer electronics, wireless communications, semiconductor and display industries steadfastly pursue and protect intellectual property rights. This has resulted in considerable and costly litigation to determine the validity of patents and claims by third parties of infringement of patents or other intellectual property rights. Our products could be found to infringe on the intellectual property rights of others. Other companies may hold or obtain patents or inventions or other proprietary rights in technology necessary for our business. Periodically, other companies inquire about our products and technology in their attempts to assess whether we violate their intellectual property rights. If we are forced to defend against infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted. If there is a successful claim of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease using one or more of our business or product names due to a successful trademark infringement claim against us, it could adversely affect our business. Our intellectual property rights and proprietary rights may not adequately protect our products. Our commercial success will depend substantially on our ability to obtain patents and other intellectual property rights and maintain adequate legal protection for our products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets. As of the date of this filing, we have 40 issued U.S. and foreign patents and 23 pending U.S. and foreign patent applications. We apply for patents covering our products, services, technologies and designs, as we deem appropriate. We may fail to apply for patents on important products, services, technologies or designs in a timely fashion, or at all. We do not know whether any of our patent applications will result in the issuance of any patents. Even if patents are issued, they may not be sufficient to protect our products, services, technologies, or designs. Our existing and future patents may not be sufficiently broad to prevent others from developing competing products, services technologies, or designs. Intellectual property protection and patent rights outside of the United States are even less predictable. As a result, the validity and enforceability of patents cannot be predicted with certainty. Moreover, we cannot be certain whether: · we were the first to conceive of or invent the inventions covered by each of our issued patents and pending patent applications; · we were the first to reduce to practice inventions covered by each of our issued patents and pending patent applications; · we were the first to file patent applications for these inventions; · others will independently develop similar or alternative products, technologies, services or designs or duplicate any of our products, technologies, services or designs; any patents issued to us will provide us with any competitive advantages, or will be challenged by third parties; · · we will develop additional proprietary products, services, technologies or designs that are patentable; or · the patents of others will have an adverse effect on our business. The patents we own or license and those that may be issued to us in the future may be challenged, invalidated, rendered unenforceable or circumvented, and the rights granted under any issued patents may not provide us with proprietary protection or competitive advantages. Moreover, third parties could practice our inventions in territories where we do not have patent protection or in territories where they could obtain a compulsory license to our technology where patented. Such third parties may then try to import products made using our inventions into the United States or other territories. We cannot ensure that any of our pending patent applications will result in issued patents, or even if issued, predict the breadth, validity and enforceability of the claims upheld in our and other companies’ patents. 22 We have registered and applied to register certain of our trademarks in several jurisdictions worldwide. In some jurisdictions where we have applied to register our trademarks, other applications or registrations exist for the same, similar or otherwise related products or services. If we are not successful in arguing that there is no likelihood of confusion between our marks and the marks that are the subject of the other applications or registrations owned by third parties, our applications may be denied, preventing us from obtaining trademark registrations and adequate protection for our marks in the relevant jurisdictions, which could impact our ability to build our brand identity and market our products and services in those jurisdictions. Whether or not our application is denied, third parties may claim that our trademarks infringe their rights. As a result, we could be forced to pay significant settlement costs or cease the use of these trademarks and associated elements of our brand in the United States or other jurisdictions. Even in those jurisdictions where we are able to register our trademarks, competitors may adopt or apply to register similar trademarks to ours, may register domain names that mimic ours or incorporate our trademarks, or may purchase keywords that are identical or confusingly similar to our brand names as terms in Internet search engine advertising programs, which could impede our ability to build our brand identity and lead to confusion among potential customers of our products and services. If we are not successful in proving that we have prior rights in our marks and arguing that there is a likelihood of confusion between our marks and the marks of these third parties, our inability to prevent these third parties from use may negatively impact the strength, value and effectiveness of our brand names and our ability to market our products and prevent consumer confusion. The laws of certain countries do not protect intellectual property and proprietary rights to the same extent as the laws of the United States and, therefore, in certain jurisdictions, we may be unable to protect our products, services, technologies and designs adequately against unauthorized third-party copying, infringement or use, which could adversely affect our competitive position. To protect or enforce our intellectual property rights, we may initiate proceedings or litigation against third parties. Such proceedings or litigation may be necessary to protect our trade secrets or know-how, products, technologies, designs, brands, reputation, likeness, authorship works or other intellectual property rights. Such proceedings or litigation also may be necessary to determine the enforceability, scope and validity of the proprietary rights of others. Any proceedings or lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Additionally, we may provoke third parties to assert claims against us. These claims could invalidate or narrow the scope of our own intellectual property rights. We may not prevail in any proceedings or lawsuits that we initiate and the damages or other remedies awarded, if any, may be commercially valuable. The occurrence of any of these events may adversely affect our business, financial condition and operating results. If our customers are not satisfied with our technical support or software updates on some of our products, they may choose not to purchase our products, either of which would adversely impact our business and operating results. Our business relies, in part, on our customers’ satisfaction with the technical support and software updates we provide to support our products. If we fail to provide technical support services that are responsive, satisfy our customers’ expectations and resolve issues that they encounter with our products, customers may choose not to purchase additional products and we may face brand and reputational harm, which could adversely affect our operating results. If we lose our rights under our third-party technology licenses, our operations could be adversely affected. Our business depends in part on technology rights licensed from third parties. We could lose our exclusivity or other rights to use the technology under our licenses if we fail to comply with the terms and performance requirements of the licenses. In addition, certain licensors may terminate a license upon our breach and have the right to consent to sublicense arrangements. If we were to lose our rights under any of these licenses, or if we were unable to obtain required consents to future sublicenses, we could lose a competitive advantage in the market, and may even lose the ability to commercialize certain products or technologies completely. Either of these results could substantially decrease our revenues. 23 We may be subject to product liability or warranty claims that could result in significant direct or indirect costs, or we could experience greater returns from our resellers than expected, which could harm our business and operating results. We generally provide a one-year warranty on all of our products, except in the European Union, or EU, where we provide a two-year warranty on all of our products. The occurrence of any material defects in our products could make us liable for damages and warranty claims in excess of our current reserves. In addition, we could incur significant costs to correct any defects, warranty claims or other problems, including costs related to product recalls. Any negative publicity related to the perceived quality and safety of our products could affect our brand image, decrease retailer, distributor and customer demand, and adversely affect our operating results and financial condition. Also, while our warranty is limited to repairs and returns, warranty claims may result in litigation, the occurrence of which could adversely affect our business and operating results. Our dependence on sales to VARs, resellers, and distributors increases the risks of managing our supply chain and may result in excess inventory or inventory shortages. We expect the majority of our various resller relationships for our Video Eyewear and Smart Glasses products and their accessories could involve them taking inventory positions and reselling to multiple customers. Under some typical distributor relationships, we would not recognize revenue until the distributors sell the product through to their end user customers and receive payment thereon; however, at this time we do not currently enter into these types of arrangements. Our distributor relationships may reduce our ability to forecast sales and increase risks to our business. Since our distributors would act as intermediaries between us and the end user customers or resellers, we would be required to rely on our distributors to accurately report inventory levels and production forecasts. This may require us to manage a more complex supply chain and monitor the financial condition and credit worthiness of our distributors and their major end user customers. Our failure to manage one or more of these risks could result in excess inventory or shortages that could adversely impact our operating results and financial condition. Our operating results may be adversely impacted by worldwide political and economic uncertainties and specific conditions in the markets we address. In the recent past, the economy in the United States and elsewhere has experienced periods of slower economic activity, large government debt levels and operating deficits, increased energy costs, decreased consumer confidence, reduced corporate profits and capital spending, and adverse business conditions. Any worsening of the current global economic and financial conditions could materially adversely affect (i) our ability to raise, or the cost of, needed capital, and (ii) demand for our current and future products. We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery, worldwide, or in the display industry. Our results of operations may suffer if we are not able to successfully manage our increasing exposure to foreign exchange rate risks. A substantial majority of our sales and cost of components are denominated in U.S. dollars. As our business grows both our sales and production costs may increasingly be denominated in other currencies. Where such sales or production costs are denominated in other currencies, they are converted to U.S. dollars for the purpose of calculating any sales or costs to us. Our sales may decrease as a result of any appreciation of the U.S. dollar against these other currencies. The majority of our current expenditures are incurred in U.S. dollars and many of our components come from countries that currently peg their currency against the U.S. dollar. If the pegged exchange rates should change adversely or be allowed to float up, additional U.S. dollars will be required to fund our purchases of these components. Although we do not currently enter into currency option contracts or engage in other hedging activities, we may do so in the future. There is no assurance that we will undertake any such hedging activities or that, if we do so, they will be successful in reducing the risks to us of our exposure to foreign currency fluctuations. 24 Due to our significant level of international operations, including the use of foreign contract manufactures, we are subject to international operational, financial, legal and political risks which could harm our operating results. We purchase product components from our suppliers, engage third party contract manufacturing firms to perform electronic circuit board and cable assemblies, and, up until most recently, have performed the final assembly of our products ourselves in our prior Rochester, New York facility. In September 2014, we began having final assembly of our M100 Smart Glasses product done, and recently began having our new iWear Video Headphones assembled in China. We expect to continue to have final assembly of most of our products performed externally however we intend to use our new West Henrietta, New York facility primarily for the production of waveguides and their related display engines. Some final assembly initial production runs of new products may also continue at our Henrietta plant. However, if our volume increases and cost effective third party sourcing becomes feasible, we anticipate that we may outsource the bulk of the final assembly, with the possible exception of certain critical optical and display components. Accordingly, a substantial part of our operations, including manufacturing of certain components used in our products and most recently the M100 Smart Glasses and iWear Video Headphones, are outside of the United States and many of our customers and suppliers have some or all of their operations in countries other than the United States. Risks associated with our doing business outside of the United States include: · · · · · · · compliance burdens and costs with a wide variety of foreign laws and regulations, particularly labor, environmental and other laws and regulations that govern our operations in those countries; legal uncertainties regarding foreign taxes, tariffs, quotas, export controls, export licenses, import controls and other trade barriers; economic instability and high levels of inflation in the countries of our suppliers and customers, particularly in the Asia-Pacific region, causing delays or reductions in orders for their products and therefore our sales; political instability in the countries in which our suppliers operate, particularly in China, Korea and Taiwan; changes or volatility in currency exchange rates. difficulties in collecting accounts receivable and longer accounts receivable payment cycles; and potentially adverse tax consequences. Any of these factors could harm our own, our suppliers’ and our customers’ international operations and businesses and impair our and their ability to continue expanding into international markets. Terrorism and the uncertainty of future terrorist attacks or war could reduce consumer confidence which could adversely affect our operating results. Terrorist acts or acts of war may cause damage or disruption to our facilities, information systems, vendors, employees and customers, which could significantly harm our sales and results of operations. In the future, fears of war or additional acts of terrorism may have a negative effect on consumer confidence or consumer discretionary spending patterns, as well as have an adverse effect on the economy in general. This impact may be particularly harmful to our business because we expect to rely heavily on discretionary consumer spending and consumer confidence levels. We could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act or similar anti-bribery laws in other jurisdictions in which we operate. The global nature of our business and the significance of our international revenue create various domestic and local regulatory challenges and subject us to risks associated with our international operations. We operate in areas of the world that experience corruption by government officials to some degree and, in certain circumstances, compliance with anti-bribery and anticorruption laws may conflict with local customs and practices. Our global operations require us to import and export to and from several countries, which geographically expands our compliance obligations. In addition, changes in such laws could result in increased regulatory requirements and compliance costs which could adversely affect our business, financial condition and results of operations. 25 The U.S. Foreign Corrupt Practices Act, or the FCPA, the U.K. Bribery Act 2010, or the U.K. Bribery Act, and similar anti-bribery and anticorruption laws in other jurisdictions generally prohibit U.S.-based companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business, directing business to another, or securing an advantage. In addition, U.S. public companies are required to maintain records that accurately and fairly represent their transactions and have an adequate system of internal accounting controls. Under the FCPA, U.S. companies may be held liable for the corrupt actions taken by directors, officers, employees, agents, or other strategic or local partners or representatives. As such, if we or our intermediaries fail to comply with the requirements of the FCPA or similar legislation, governmental authorities in the United States and elsewhere could seek to impose substantial civil and/or criminal fines and penalties which could have a material adverse effect on our business, reputation, operating results and financial condition. We are subject to governmental export and import controls and economic sanctions laws that could subject us to liability and impair our ability to compete in international markets. The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of some technologies. Our products are subject to U.S. export controls, including the Commerce Department’s Export Administration Regulations and various economic and trade sanctions regulations established by the Treasury Department’s Office of Foreign Assets Controls, and exports of our products must be made in compliance with these laws. Furthermore, U.S. export control laws and economic sanctions prohibit the provision of products and services to countries, governments, and persons targeted by U.S. sanctions. Even though we take precautions to prevent our products from being provided to targets of U.S. sanctions, our products, including our firmware updates, could be provided to those targets or provided by our customers despite such precautions. Any such provision could have negative consequences, including government investigations, penalties and reputational harm. Our failure to obtain required import or export approval for our products could harm our international and domestic sales and adversely affect our revenue. If our estimates or judgments relating to our critical accounting policies prove to be incorrect, our operating results could be adversely affected. The preparation of financial statements in conformity with United States GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, as provided in the section titled “Management’s discussion and analysis of financial condition and results of operations” in this report. The results of these estimates form the basis for making judgments about the carrying values of assets, liabilities and equity, and the amount of revenue and expenses that are not readily apparent from other sources. Our operating results may be adversely affected if our assumptions change or if actual circumstances differ from those in our assumptions, which could cause our operating results to fall below the expectations of securities analysts and investors, resulting in a decline in our stock price. Significant assumptions and estimates used in preparing our consolidated financial statements include those related to revenue recognition, stock-based compensation expense, software development costs, derivatives and fair value measurements, excess and obsolete inventory write-downs, warranty reserves, and long-lived assets. Any significant disruption to our ecommerce business could result in lost sales. Our sales through our ecommerce channel have been growing. Sales through vuzix.com and our related EU, UK and Japanese web stores generally have higher profit margins than sales through resellers. Online sales are subject to a number of risks. System interruptions or delays could cause potential customers to fail to purchase our products and could harm our brand. The operation of our direct to consumer ecommerce business through vuzix.com depends on our ability to maintain the efficient and uninterrupted operation of online order-taking and fulfillment operations. Our ecommerce operations subject us to certain risks that could have an adverse effect on our operating results, including risks related to the computer systems that operate our website and related support systems, such as system failures, viruses, computer hackers and similar disruptions. If we are unable to continually add software and hardware, effectively upgrade our systems and network infrastructure and take other steps to improve the efficiency of our systems, system interruptions or delays could occur that adversely affect our operating results. 26 We utilize third party vendors for our customer-facing ecommerce technology, portions of our order management system and fulfillment internationally. We depend on our technology vendors to manage “up-time” of the front-end ecommerce store, manage the intake of our orders, and export orders for fulfillment. In the future, we could begin to run all or a greater portion of our ecommerce components ourselves rather than use third party vendors. Any failure on the part of our third party ecommerce vendors or in our ability to transition third party services effectively could result in lost sales and harm our business. Failure to adequately protect customer data could harm our brand and our reputation in the marketplace. Changing regulations and laws governing the Internet, data privacy, data protection and ecommerce transactions (including taxation, pricing and electronic communications) could impede the growth of our ecommerce business, increase our cost of doing business and limit our ability to collect and use information collected from our customers. Further, new regulations limiting our ability to collect, use and disclose customer data, or imposing additional requirements with respect to the retention and security of customer data, could limit our marketing activities and could adversely affect our business and financial condition. In connection with our ecommerce services, we process, store and transmit customer data. We also collect customer data through certain marketing activities. Failure to prevent or mitigate data loss or other security breaches, including breaches of our vendors’ technology and systems, could expose us or our customers to a risk of loss or misuse of such information, adversely affect our operating results, result in litigation or potential liability for us and otherwise harm our business. Further, we are subject to general business regulations and laws, as well as regulations and laws specifically governing the Internet, ecommerce and electronic devices. Existing and future laws and regulations, or new interpretations of these laws, may adversely affect our ability to conduct our ecommerce business. We may lose the services of key management personnel and may not be able to attract and retain other necessary personnel. Changes in our management could have an adverse effect on our business. This is especially an issue while our staff is small. We are dependent upon the active participation of several key management personnel, including Paul J. Travers, our President and Chief Executive Officer. Mr. Travers is critical to the strategic direction and overall management of our company as well as our research and development process. Mr. Travers is an at-will employee and there are no vesting restrictions on any of the common stock that he owns other than on some incentive stock options representing less than 2% of his total holdings. The loss of Mr. Travers could adversely affect our business, financial condition and operating results. We do not carry key person life insurance on any of our senior management or other key personnel other than our CEO. While we have life insurance coverage on our CEO, we do not believe the coverage would be sufficient to completely protect us against losses we may suffer if his services were to become unavailable to us in the future. Our Executive Vice President and Chief Financial Officer, Grant Russell, a Canadian citizen, currently has his principal residence in Vancouver, Canada and a second residence in Rochester, New York. If he becomes unable to legally or efficiently travel to and work in the United States, his ability to perform some of his duties could be materially adversely affected. We will need to hire and retain highly skilled technical personnel as employees and as independent contractors in order to develop our products. The competition for highly skilled technical, managerial and other personnel is at times intense. Our recruiting and retention success is substantially dependent on our ability to offer competitive salaries and benefits to our employees. We must compete with companies that possess greater financial and other resources than we do and that may be more attractive to potential employees and contractors. To be competitive, we may have to increase the compensation, bonuses, stock options and other fringe benefits offered to employees in order to attract and retain such personnel. The costs of retaining or attracting new personnel may have a material adverse effect on our business and operating results. If we fail to attract and retain the technical and managerial personnel we need to be successful, our business, operating results and financial condition could be materially adversely affected. 27 Our failure to effectively manage growth could harm our business. We intend to expand the number and types of products we sell. We will need to replace and regularly introduce on a timely basis new products and technologies, enhance existing products, and effectively stimulate customer demand for new products and upgraded versions of our existing products. The replacement and expansion of our products places a significant strain on our management, operations and engineering resources. Specifically, the areas that are strained most by these activities include the following: · New Product Launch: With the growth of our product portfolio, we will experience increased complexity in coordinating product development, manufacturing, and shipping. As this complexity increases, it places a strain on our ability to accurately coordinate the commercial launch of our products with adequate supply to meet anticipated customer demand and effectively market to stimulate demand and market acceptance. We have experienced delays in the past. If we are unable to scale and improve our product launch coordination, we could frustrate our customers and lose possible retail shelf space and product sales; · Existing Products Impacted by New Introductions: The introduction of new products or product enhancements may shorten the life cycle of our existing products, or replace sales of some of our current products, thereby offsetting the benefit of even a successful product introduction, and may cause customers to defer purchasing our existing products in anticipation of the new products and potentially lead to challenges in managing inventory of existing products. We may also provide price protection to some of our retailers as a result of our new product introductions. If we fail to effectively manage new product introductions, our revenue and profitability may be harmed; · Forecasting, Planning and Supply Chain Logistics: With the growth of our product portfolio, we will experience increased complexity in forecasting customer demand, in planning for production, and in transportation and logistics management. If we are unable to scale and improve our forecasting, planning and logistics management, we could frustrate our customers, lose product sales or accumulate excess inventory. Our facilities and information systems and those of our key suppliers could be damaged as a result of disasters or unpredictable events, which could have an adverse effect on our business operations. We operate the majority of our business from one location in the West Henrietta, a suburb of the Rochester, New York area. We also rely on third party manufacturing plants in Asia and third party logistics, sales and marketing facilities in Japan and England, and in other parts of the world to provide key components of our products and services necessary for our operations. If major disasters such as earthquakes, fires, floods, wars, terrorist attacks, computer viruses, transportation disasters or other events occur in any of these locations, or our information systems or communications network or those of any of our key component suppliers breaks down or operates improperly as a result of such events, our facilities or those of our key suppliers may be seriously damaged, and we may have to stop or delay production and shipment of our products. We may also incur expenses relating to such damages. If production or shipment of our products or components is stopped or delayed or if we incur any increased expenses as a result of damage to our facilities, our business, operating results and financial condition could be materially adversely affected. Additionally such events could impair our ability to record, process and report accurate information to the SEC could have a material adverse effect on our financial condition. A breach of our cyber security systems could materially adversely affect our business. A breach that compromises our proprietary data or our ability to meet our customers’ needs or impairs our ability to record, process and report accurate information could have a material adverse effect on our financial condition. 28 Risks Related to Manufacturing We do not manufacture our own microdisplays, one of the key components of our Video Eyewear and Smart Glasses products, and we may not be able to obtain the microdisplays we need. We do not currently own or operate any manufacturing facilities for microdisplays, one of the key components in our products. Certain other components and services necessary for the manufacture of our products are available from only a limited number of sources, and other components and services are only available from a single source. We currently purchase almost all of the microdisplays used in our Smart Glasses products from Kopin and the microdisplays used in our iWear Video Headphones from Omnivision. Our relationship with these companies generally is on a purchase order basis and neither firm has a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. Either firm could discontinue sourcing merchandise for us at any time. If one or both of these firms were to discontinue its relationships with us, or discontinue providing specific products to us, and we are unable to contract with a new supplier that can meet our requirements, or if they or such other supplier were to suffer a disruption in their production, we could experience disruption of our inventory flow, a decrease in sales and the possible need to redesign our products. Any such event could disrupt our operations and have an adverse effect on our business, financial condition and results of operations. Recently several new LCOS and alternative OLED suppliers have begun offering microdisplays suitable for use in our products. These manufacturers include Syndiant, Texas Instruments, HiMax, eMagin, Silicon Microdisplay, Sony, Omnivision, Citizen and others. With new tooling and electronics any one of these alternative displays could be incorporated into our products but our costs of production could be higher and make our products uneconomic for the marketplace. If we lose access to components from a particular supplier, or experience a significant disruption in the supply of products and components from a current supplier, we may be unable to locate alternative suppliers of comparable quality at an acceptable price, or at all, and our business could be materially and adversely affected. In addition, if we experience a significant increase in demand for our products, our suppliers might not have the capacity or elect to meet our needs as they allocate components to other customers. Identifying a suitable supplier is an involved process that requires us to become satisfied with the supplier’s quality control, responsiveness and service, financial stability and labor and other ethical practices, and if we seek to source materials from new suppliers there can be no assurance that we could do so in a manner that does not disrupt the manufacture and sale of our products. Our reliance on single source, or a limited number of, suppliers involves a number of additional risks, including risks related to: · · · · · · · supplier capacity constraints; price increases; timely delivery; component quality; failure of a key supplier to remain in business and adjust to market conditions; delays in, or the inability to execute on, a supplier roadmap for components and technologies; and natural disasters, fire, acts of terrorism or other catastrophic events. Our inability to obtain sufficient quantities of high quality components or services on a timely basis could result in future manufacturing delays, increased costs and ultimately in reduced or delayed sales or lost orders which could materially and adversely affect our operating results. We do not control our contract manufacturers or suppliers, or require them to comply with a formal code of conduct, and actions that they might take could harm our reputation and sales. We do not control our contract manufacturers or suppliers, including their labor, environmental or other practices, or require them to comply with a formal code of conduct. Though we conduct periodic visits to some of our contract manufacturers and suppliers, these visits are not so frequent or thorough enough to detect non-compliance with applicable laws and good industry practices. A violation of labor, environmental or other laws by our contract manufacturers or suppliers, or a failure of these parties to follow ethical business practices, could lead to negative publicity and harm our reputation. In addition, we may choose to seek alternative manufacturers or suppliers if these violations or failures were to occur. Identifying and qualifying new manufacturers or suppliers can be time consuming and we might not be able to substitute suitable alternatives in a timely manner or at an acceptable cost. Other consumer products companies have faced significant criticism for the actions of their manufacturers and suppliers, and we could face such criticism ourselves. Any of these events could adversely affect our brand, harm our reputation, reduce demand for our products and harm our ability to meet demand if we need to identify alternative manufacturers or suppliers. 29 We depend on third parties to provide integrated circuit chip sets and other critical components for use in our products. We do not manufacture the integrated circuit chip sets, optics, microdisplays, backlights, printed circuit boards or other electronic components which are used in our products. Instead, we purchase them from third party suppliers or rely on third party independent contractors for these integrated circuit chip sets and other critical components, some of which are customized or specially made for us. We also may use third parties to assemble all or portions of our products. Some of these third party contractors and suppliers are small companies with limited financial resources. If any of these third party contractors or suppliers were unable or unwilling to supply these integrated circuit chip sets or other critical components to us, we would be unable to manufacture and sell our products until a replacement supplier could be found. We cannot assure investors that a replacement third party contractor or supplier could be found on reasonable terms or in a timely manner. Any interruption in our ability to manufacture and distribute our products could cause our display business to be unsuccessful and the value of investors’ investment in us may decline. The consumer electronics industry is subject to significant fluctuations in the availability of components. If we do not properly anticipate the need for critical components, we may be unable to meet the demands of our customers and end-users on a timely basis. The availability of certain of the components that we require to produce our Video Eyewear and Smart Glasses products may decrease. As the availability of components decreases, the cost of acquiring those components ordinarily increases. High growth product categories such as the consumer electronics and mobile phone markets have experienced chronic shortages of components during periods of exceptionally high demand. If we do not properly anticipate the need for or procure critical components, we may pay higher prices for those components, our gross margins may decrease and we may be unable to meet the demands of our customers and end-users, which could reduce our competitiveness, cause a decline in our market share and have a material adverse effect on our results of operations. Unanticipated disruptions in our operations or slowdowns by our suppliers, distributors and shipping companies could adversely affect our ability to deliver our products and service our customers. Our ability to provide high quality customer service, process and fulfill orders and manage inventory depends on the efficient, timely and uninterrupted performance of our manufacturing and distribution facilities and our management information systems and the facilities and systems of our third party suppliers, distributors and shipping companies. Any material disruption or slowdown in the operation of our manufacturing and distribution facilities or our management information systems, or comparable disruptions or slowdowns suffered by our principal suppliers, distributors or shippers could cause delays in our ability to receive, process and fulfill customer orders and may cause orders to be canceled, lost or delivered late, goods to be returned or receipt of goods to be refused. If any of these events occur, our sales and operating results could be materially and adversely affected. Risks Related to Our Common Stock Additional stock offerings in the future may dilute then existing stockholders’ percentage ownership of our company. Given our plans and expectations that we may need additional capital, we may need to issue additional shares of common stock or securities convertible or exercisable for shares of common stock, including convertible preferred stock, convertible notes, stock options or warrants. The issuance of additional securities in the future will dilute the percentage ownership of then existing stockholders. 30 The rights of holders of common stock may be impaired by the possible future issuance of additional preferred stock. Our board of directors has the right, without approval of the holders of our common stock, to issue additional preferred stock with voting, dividend, conversion, liquidation and other rights which could adversely affect the voting power and equity interest of the holders of common stock, which could be issued with the right to more than one vote per share, and could be utilized as a method of discouraging, delaying or preventing a change of control. The possible negative impact on takeover attempts could adversely affect the price of our common stock. Although we have no present intention to issue any shares of preferred stock other than the Series A Preferred Stock currently outstanding or to create any additional series of preferred stock, we may issue these shares in the future. We have not paid dividends in the past and do not expect to pay dividends in the future on our common stock. We have never paid cash dividends on our common stock and do not anticipate paying cash dividends in the foreseeable future. The payment of dividends on our common stock will depend on earnings, financial condition, debt covenants in place, and other business and economic factors affecting us at such time as our board of directors may consider relevant. If we do not pay dividends, our common stock may be less valuable because a return on a stockholders’ investment will only occur if our stock price appreciates. In addition, the holder of our outstanding shares of Series A Preferred Stock is entitled to certain dividends prior to payments of dividends to holders of common stock. If securities analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline. The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If one or more of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price would likely decline. Securities analysts have only recently commenced research coverage on us. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, demand for our stock could decrease, which might cause our stock price and trading volume to decline. Our issuance of common stock upon conversion of convertible notes or preferred stock or exercise of warrants or options may depress the price of our common stock. As of March 25, 2016, we have issued and outstanding 16,097,951 shares of common stock, 49,626 shares of Series A Preferred Stock convertible into 4,962,600 shares of common stock, an aggregate of $1,896,240 in principal amount of convertible notes convertible into an aggregate of 842,773 shares of common stock, warrants to purchase 535,091 shares of common stock, and options to purchase 1,022,789 shares of common stock. The issuance of shares of common stock upon conversion of convertible notes or preferred stock, or exercise of outstanding warrants or options could result in substantial dilution to our stockholders, which may have a negative effect on the price of our common stock. The interests of the holder of our Series A Preferred Stock, which holds shares representing approximately 24% of the voting power of our stock and has the right to nominate and elect two directors, may conflict with the interests of our other stockholders. On January 2, 2015, we entered into and closed a Series A Preferred Stock Purchase Agreement, pursuant to which we issued and sold to Intel Corporation (the “Series A Purchaser”) 49,626 shares of Series A Preferred Stock. Each share of Series A Preferred Stock is convertible into 100 shares of common stock and votes on an as-converted basis with the common stock. The shares issuable upon conversion of the Series A Preferred Stock then represented approximately 30% of the total voting power of our outstanding stock. As of the date of this filing, the shares issuable upon conversion of the Series A Preferred Stock represent approximately 24% of the total voting power of our outstanding stock. The Series A Purchaser will be able to vote this significant amount of shares with respect to any matter submitted to stockholders for a vote. In addition, the Series A Purchaser is entitled to nominate and elect two additional directors to the Company’s Board of Directors (the “Board Election Right”), one of whom is required to qualify as an “independent” director, as that term is used in applicable exchange listing rules. The Series A Purchaser has not yet exercised the Board Election Right, but if it does so, the Series A Purchaser will have increased influence over matters considered by the Board of Directors. The Series A Purchaser may exercise its stockholder rights in a way that it believes is in its best interests, which may conflict with the interests of our other stockholders. 31 Sales of common stock by the Series A Purchaser may depress the price of our common stock. The shares of common stock issuable upon conversion of the outstanding shares of Series A Preferred Stock currently represent approximately 24% of our outstanding common stock, giving effect to conversion of such shares of Series A Preferred Stock. Resale of such conversion shares by the Series A Purchaser may depress the price of our common stock. Our stock price may be volatile in the future. The trading price of our common stock has been subject to wide fluctuations in response to quarter-to-quarter variations in results of operations, announcements of technological innovations or new products by us or our competitors, general conditions in the wireless communications, semiconductor and display markets, changes in earnings estimates by analysts or other events or factors. In addition, the public stock markets recently have experienced extreme price and trading volatility. This volatility has significantly affected the market prices of securities of many technology companies for reasons frequently unrelated to the operating performance of the specific companies. These broad market fluctuations may adversely affect the market price of our common stock. Item 1B. Unresolved Staff Comments Not required for a smaller reporting company. Item 2. Properties We lease approximately 29,000 square feet as our main facility at 25 Hendrix Road, West Henrietta, New York, 14563. This facility houses our office, R&D and manufacturing space under an operating lease that we began occupying in October 2015. The base rent contractual payment obligations under this operating lease is $335,248 per year. The lease has an original five year term with an option by the Company to renew for two additional three year terms at pre-agreed to lease rates. We lease approximately 8,800 square feet at our old manufacturing and offices facilities located at 2166 Brighton Henrietta Townline Road, Rochester, New York 14623. This older facility, holds portions of our research and development and equipment related to waveguides. We currently pay approximately $65,000 per year in rent, including common area maintenance costs. The existing one-year lease will expire on October 31, 2016 before which all remaining waveguide equipment will be relocated to our new 25 Hendrix Road location. We believe that both facilities are in good operating condition and currently adequately serves our needs, however we intend to move from the 2166 location on or before the current lease expires in October 2016. In Oxford, England, we rent 400 square feet of office space at a cost of approximately $10,900 per year. We lease this location pursuant to a renewable two-year lease which is scheduled to expire on September 29, 2017. In Tokyo, Japan, we rent 175 square feet of office space at a cost of approximately $25,000 per year. We lease this location pursuant to a renewable one-year lease which is scheduled to expire on March 1, 2017. 32 Item 3. Legal Proceedings We are not currently involved in any pending legal proceeding or litigation and we are not aware of any such proceedings contemplated by or against us or that our property is subject to. To our knowledge, there are no material legal proceedings to which any of our directors, officers or affiliates, or any beneficial owner of more than five percent of our common stock, or any associate of any of the foregoing, is a party adverse to us or any of our subsidiaries or has a material interest adverse to us or any of our subsidiaries. Item 4. Mine Safety Disclosures Not applicable. PART II Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities Market for our Common Stock Our common stock is listed on the NASDAQ Capital Market under the symbol “VUZI”. Prior to January 28, 2015 our stock was quoted in the United States on the OTCQB under the symbol “VUZI”. The following table sets forth, for the fiscal quarters indicated, the high and low closing sales prices for Vuzix’ common stock as quoted on NASDAQ or the OTCQB. The quotations on the OTCQB reflect inter-dealer prices, without mark-up, mark-down or commission, and may not represent actual transactions. Vuzix Stock Prices Low High Fiscal Quarters First 2015 Second 2015 Third 2015 Fourth 2015 Vuzix Stock Prices Fiscal Quarters First 2014 Second 2014 Third 2014 Fourth 2014 $ $ 4.21 $ 5.50 3.98 4.54 7.20 7.12 6.84 8.51 Low High 2.45 $ 2.10 2.42 2.65 4.58 3.45 4.14 4.75 Holders of Record As of March 28, 2016, there were 43 holders of record of our common stock. Dividends We currently do not pay regular dividends on our outstanding common stock. The declaration of any future dividends and, if declared, the amount of any such dividends, will be subject to our actual future earnings, capital requirements, regulatory restrictions, debt covenants, other contractual restrictions and to the discretion of our board of directors. Our board of directors may take into account such matters as general business conditions, our financial condition and results of operations, our capital requirements, our prospects and such other factors as our board of directors may deem relevant. Shares of Series A Preferred stock are entitled to receive dividends at a rate of 6% per year, compounded quarterly and payable in cash or in kind, at our discretion. 33 Issuer Purchases of Equity Securities We did not purchase equity securities that are registered under Section 12 of the Exchange Act during the year ended December 31, 2015. Unregistered Sales of Equity Securities and use of Proceeds Sales of Unregistered Securities - During the three months ended December 31, 2015, we issued 7,500 shares of common stock for investor relations services. - During the three months ended December 31, 2015, we issued 21,017 shares of common stock upon the exercise of warrants. In connection with the foregoing, we relied upon the exemption from registration provided by Section 4(a)(2) under the Securities Act of 1933, as amended, for transactions not involving a public offering. Equity Compensation Plan Information The following table provides information about our equity compensation plans as of December 31, 2015. Plan Category Equity compensation plans approved by security holders Equity compensation plans not approved by security holders Total Number of Securities to be Issued Upon Exercise of Outstanding Options, Warrants and Rights(2) Weighted Average Exercise Price of Outstanding Options, Warrants and Rights Number of Securities Remaining Available for Future Issuance (1) 1,022,789 $ — 1,022,789 $ 4.59 — 4.59 744,295 — 744,295 (1) The amount appearing under “Number of securities remaining available for future issuance under equity compensation plans” includes shares available under our 2014 Equity Incentive Plan. The 2014 Plan has an “evergreen provision”, under which the maximum number of shares of common stock that may be issued under the 2014 Plan automatically increases each time the Company issues additional shares of common stock so that the total number of shares issuable thereunder at all times equals 10% of the then outstanding shares of common stock, unless in any case the Board of Directors adopts a resolution providing that the number of shares issuable under the 2014 Plan not be so increased. Item 6. Selected Financial Data Not required for a smaller reporting company. Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations The following discussion and analysis of financial condition and results of operations should be read in conjunction with our financial statements and related notes appearing elsewhere in this annual report. In addition to historical information, the following discussion and analysis includes forward looking statements that involve risks, uncertainties and assumptions. Our actual results and the timing of events could differ materially from those anticipated in these forward looking statements as a result of a variety of factors, including those discussed in “Risk Factors” and elsewhere in this annual report. See the discussion under “Forward Looking Statements” beginning on page 3 of this annual report. Overview We are engaged in the design, manufacture, marketing and sale of wearable display devices that are worn like eyeglasses and feature built-in video screens that enable the user to view video and digital content, such as movies, computer data, the Internet or video games. Our wearable display products, known commercially as Video Eyewear (also referred to as head mounted displays or HMDs), smart glasses, wearable displays, video glasses, personal viewers, near-eye virtual displays, and near-eye displays (NEDs) contain micro video displays that offer users a portable high-quality viewing experience. Our Video Eyewear products provide virtual large high-resolution screens, fit in a user’s pocket or purse and can be viewed practically anywhere, anytime. They can also be used for virtual and augmented reality applications, in which the wearer is either immersed in a computer generated world or has their real world view augmented with computer generated information or graphics. In the 4th quarter of 2014, we started shipping smart glasses, a new category of Video Eyewear that has much of the capabilities of a smartphone including wireless internet access but that is worn like glasses. We produce both monocular and binocular Video Eyewear devices. Video Eyewear are designed to work with mobile electronic devices, such as cell phones, laptop computers, tablets, portable media players and gaming systems. 34 Our Video Eyewear products feature high performance miniature display modules, low power electronics and related optical systems. We produce both monocular and binocular Video Eyewear devices that we believe are excellent solutions for many mobile computer or video viewing requirements. With respect to our Video Eyewear products, we focus on the consumer markets for gaming and mobile video while our Virtual and Augmented Reality products are also sold in the consumer, industrial, commercial, academic and medical markets. The consumer electronics and mobile phone accessory markets in which we compete has been subject to rapid technological change including the rapid adoption of tablets and most recently larger screen sizes and display resolutions along with declining prices on mobile phones, and as a result we must continue to improve our products’ performance and lower our costs. Today, we believe our intellectual property portfolio gives us a leadership position in microdisplay electronics, waveguides, ergonomics, packaging, motion tracking and optical systems. Critical Accounting Policies and Significant Developments and Estimates The discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements and related notes appearing elsewhere in this annual report. The preparation of these statements in conformity with generally accepted accounting principles requires the appropriate application of certain accounting policies, many of which require us to make estimates and assumptions about future events and their impact on amounts reported in our consolidated financial statements, including the statement of operations, balance sheet, cash flow and related notes. We continually evaluate our estimates used in the preparation of our consolidated financial statements, including those related to revenue recognition, bad debts, inventories, warranty reserves, product warranty, carrying value of long-lived assets, derivatives, valuation of stock compensation awards, and income taxes. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not apparent from other sources. Since future events and their impact cannot be determined with certainty, the actual results will inevitably differ from our estimates. Such differences could be material to the consolidated financial statements. We believe that our application of accounting policies, and the estimates inherently required therein, are reasonable. We periodically reevaluate these accounting policies and estimates, and make adjustments when facts and circumstances dictate a change. Historically, we have found our application of accounting policies to be appropriate, and actual results have not differed materially from those determined using necessary estimates. Our accounting policies are more fully described in the notes to our consolidated financial statements included in this annual report on Form 10-K. The critical accounting policies, judgments and estimates that we believe have the most significant effect on our financial statements are: • Valuation of inventories; • • • • • • • Carrying value of long-lived assets; Software development costs Revenue recognition; Product warranty; Fair value measurement of financial instruments and embedded derivatives; Stock-based compensation; and Income taxes. Valuation of Inventories Inventory is stated at the lower of cost or market, with cost determined on a weighted average first-in, first-out method. Inventory includes purchased parts and components, work in process and finished goods. Provisions for excess, obsolete or slow moving inventory are recorded after periodic evaluation of historical sales, current economic trends, forecasted sales, estimated product lifecycles and estimated inventory levels. Purchasing practices, electronic component obsolescence, accuracy of sales and production forecasts, introduction of new products, product lifecycles, product support and foreign regulations governing hazardous materials are the factors that contribute to inventory valuation risks. Exposure to inventory valuation risks is managed by maintaining safety stocks, minimum purchase lots, managing product and end-of-life issues brought on by aging components or new product introductions, and by utilizing certain inventory minimization strategies such as vendor-managed inventories. The accounting estimate related to valuation of inventories is considered a “critical accounting estimate” because it is susceptible to changes from period-to-period due to the requirement for management to make estimates relative to each of the underlying factors, ranging from purchasing, to sales, to production, to after-sale support. If actual demand, market conditions or product lifecycles differ from estimates, inventory adjustments to lower market values would result in a reduction to the carrying value of inventory, an increase in inventory write-offs and a decrease to gross margins. 35 Carrying Value of Long-Lived Assets If facts and circumstances indicate that a long-lived asset, including a products’ mold tooling and equipment, may be impaired, the carrying value is reviewed in accordance with FASB ASC Topic 360-10. If this review indicates that the carrying value of the asset will not be recovered as determined based on projected undiscounted cash flows related to the asset over its remaining life, the carrying value of the asset is reduced to its estimated fair value. Impairment losses are dependent on a number of factors such as general economic trends and major technology advances, and thus could be significantly different than historical results. No impairment charges on tooling and equipment were recorded in 2015 or 2014. We perform a valuation of our patents and trademark assets when events or circumstances indicate their carrying amounts may be unrecoverable. We recorded an impairment charge of $13,222 representing cost of $21,954, less accumulated amortization of $8,732 in 2015, and an impairment charge of $104,716 representing cost of $166,500, less accumulated amortization of $61,784 in 2014 regarding our abandoned patents and trademarks. The value of the remaining intellectual property, such as patents and trademarks, were valued (net of accumulated amortization) at $515,697 as of December 31, 2015, because management believes that its value is recoverable. Software Development Costs The Company capitalizes the costs of obtaining and developing its software once technological feasibility has been determined by management. Such costs are accumulated and capitalized. These projects could take several years to complete. The capitalized costs are then amortized over 3 to 5 years on a straight-line basis. Unsuccessful or discontinued software projects are written off and expensed in the fiscal period where the application is abandoned or discontinued. The value of the unamortized software development costs remaining, were valued (net of accumulated amortization) at $501,288 as of December 31, 2015, because management believes that its value is recoverable. Revenue Recognition We recognize revenue from product sales in accordance with FASB ASC Topic 605, Revenue Recognition. Product sales represent the majority of our revenue and there have been no material changes in or inflation in our product pricing over the past two fiscal periods. We recognize revenue from these product sales when persuasive evidence of an arrangement exists, delivery has occurred or services have been provided, the sale price is fixed or determinable, and collectability is reasonably assured. Additionally, we sell our products on terms which transfer title and risk of loss at a specified location, typically shipping point. Accordingly, revenue recognition from product sales occurs when all factors are met, including transfer of title and risk of loss, which typically occurs upon shipment by us. If these conditions are not met, we will defer the revenue recognition until such time as these conditions have been satisfied. We collect and remit sales taxes in certain jurisdictions and report revenue net of any associated sales taxes. We also sell certain products through distributors who are granted limited rights of return for stock balancing against purchases made within a prior 90 day period, including price adjustments downwards on any existing inventory. The provision for product returns and price adjustments is assessed for adequacy both at the time of sale and at each quarter end and is based on recent historical experience and known customer claims. Revenue from any engineering consulting and other services is recognized at the time the services are rendered. For our longer-term development contracts, which to date have all been firm, fixed-priced contracts, we recognize revenue on the percentage-of-completion method. Under this method income is recognized as work on contracts progresses, but estimated losses on contracts in progress are charged to operations immediately. To date, all of our longer-term development contracts have been less than one calendar year in duration. We generally submit invoices for our work under these contracts on a monthly basis. The percentage-of-completion is determined using the cost-to-cost method. 36 We recognize software license revenue under ASC 985-605 “Software Revenue Recognition” and under ASC 605-25 “Revenue Arrangements with Multiple Deliverables”, and related interpretations, as amended. Licensed software may be sold as a stand-alone element, with other software elements, or in conjunction with hardware products. When our products consists of more than one element, the product is considered to be a multiple element arrangement (MEA). When sold as a stand-alone element, the revenue is recognized upon shipment as discussed above. When sold as part of a MEA, revenue from the licensed software is recognized when the product and embedded software is shipped to the customer. For either a single element transaction or a MEA, the Company allocates consideration to all deliverables based on their relative stand-alone selling prices. Amendments to ASC 605-25, which became effective January 1, 2011, establish a hierarchy to determine the stand-alone selling price as follows: • • • Vendor Specific Objective Evidence of the fair value (VSOE), Third Party Evidence (TPE) Best Estimate of the Selling Price (ESP) Sales which constitute a MEA are accounted for by determining if the elements can be accounted for as separate accounting units, and if so, by applying values to those units, per the hierarchy above. If VSOE is not available, management estimates the fair selling price using historical pricing for similar items, in conjunction with current pricing and discount policies. Revenue from licensed software is recognized upon shipment and in accordance with industry-specific software recognition accounting guidance. Software updates that will be provided free of charge are evaluated on a case-by-case basis to determine whether they meet the definition of an upgrade and create a multiple element arrangement. Fees charged to customers for post-contract Technical Support are recognized ratably over the term of the contract. Costs related to maintenance obligations are expensed as incurred. Product Warranty Warranty obligations are generally incurred in connection with the sale of our products. The warranty period for these products is generally one year except in European countries where it is two years. Warranty costs are accrued, to the extent that they are not recoverable from third party manufacturers, for the estimated cost to repair or replace products for the balance of the warranty periods. We provide for the costs of expected future warranty claims at the time of product shipment or over-builds to cover replacements. The adequacy of the provision is assessed at each quarter end and is based on historical experience of warranty claims and costs. The costs incurred to provide for these warranty obligations are estimated and recorded as an accrued liability at the time of sale. Future warranty costs are estimated based on historical performance rates and related costs to repair given products. The accounting estimate related to product warranty is considered a “critical accounting estimate” because judgment is exercised in determining future estimated warranty costs. Should actual performance rates or repair costs differ from estimates, revision to the estimated warranty liability would be required. Derivatives and Fair Value Measurements FASB ASC Topic 820, “Fair Value Measurements and Disclosures” (ASC 820) defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles, and expands disclosures about fair value measurements. ASC 820 clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. ASC 820 permits an entity to measure certain financial assets and financial liabilities at fair value with changes in fair value recognized in earnings each period. In accordance with ASC 815-10-25, we measured the derivative liability using a Lattice pricing model at their issuance date and subsequently they are remeasured. Accordingly, at the end of each quarterly reporting date the derivative fair market value is remeasured and adjusted to current market value. Derivatives that have more than one year remaining in their life are shown as long term derivative liabilities. Significant unobservable inputs are used in the fair value measurement of the Company’s derivative liability. The primary input factors driving the economic or fair value of the derivatives warrants and convertible notes are the stock price of the Company’s shares; the price volatility of the shares, reset events, and exercise behavior. An important valuation input factor used in determining fair value was the expected volatility of observed share prices and the probability of projected resets in warrant exercise and note conversion prices from financing before each security’s maturity. For exercise behavior the Company assumed that without a target price of 2 times the projected reset price or higher that the holders of the warrants and convertible notes would hold to maturity. In determining the fair value of the derivatives it was assumed that the Company’s business would be conducted as a going concern and that holding to maturity was reasonable. Further the January 2, 2015 Series A Preferred financing reduced the expected probability to near zero for price resets from financing events. 37 ASC 820 establishes a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value. Level 1 inputs are quoted prices in active markets for identical assets or liabilities. Level 2 inputs are inputs other than quoted prices included in Level 1 that are directly or indirectly observable for the asset or liability. Such inputs include quoted prices in active markets for similar assets and liabilities, quoted prices for identical or similar assets or liabilities in markets that are not active, inputs other than quoted prices that are observable for the asset or liability, or inputs derived principally from or corroborated by observable market data by correlation or other means. Level 3 inputs are unobservable inputs for the asset or liability. Such inputs are used to measure fair value when observable inputs are not available. Stock-Based Compensation Our board of directors approves grants of stock options to employees to purchase our common stock. A stock compensation expense is recorded based upon the estimated fair value of the stock option at the date of grant. The accounting estimate related to stock-based compensation is considered a “critical accounting estimate” because estimates are made in calculating compensation expense including expected option lives, forfeiture rates and expected volatility. The fair market value of our common stock on the date of each option grant is determined based on the most recent quoted sales price on our primary trading stock exchange, currently the NASDAQ Capital Market. Income Taxes We have historically incurred domestic operating losses from both a financial reporting and tax return standpoint. Accordingly, we provide deferred income tax assets and liabilities based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities based on currently enacted tax laws. Any future recorded value of our deferred tax assets will be dependent upon our ability to generate taxable income in the jurisdictions in which we operate. These assets consist primarily of credit carry-forwards and net operating loss carry-forwards and the future tax effect of temporary differences between balances recorded for financial statement purposes and for tax return purposes. AA valuation allowance is established for deferred tax assets in amounts for which realization is not considered more likely than not to occur. The accounting estimate related to income taxes is considered a “critical accounting estimate” because judgment is exercised in estimating future taxable income, including prudent and feasible tax planning strategies, and in assessing the need for any valuation allowance. To date we have determined a 100% valuation allowance is required and accordingly no amounts have been reflected in our consolidated financial statements. In the event that it should be determined that all or part of a deferred tax asset in the future is in excess of the nil amount currently recorded, an adjustment of the valuation allowance would increase income to be recognized in the period such determination was made. In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. As a result we recognize liabilities for uncertain tax positions based on the two-step process prescribed within the interpretation. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step requires us to estimate and measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as this requires us to determine the probability of various possible outcomes. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period. The Company currently has no uncertain tax positions. Off Balance Sheet Arrangements We do not have any off-balance sheet arrangements that have, or are reasonably likely to have, an effect on our financial condition, financial statements, revenues or expenses. 38 Recent Accounting Pronouncements In May 2014, the Financial Accounting Standards Board issued Accounting Standards Update No. 2014-09 (ASU 2014-09), Revenue from Contracts with Customers, an updated standard on revenue recognition. ASU 2014-09 provides enhancements to the quality and consistency of how revenue is reported while also improving comparability in the financial statements of companies reporting using International Financial Reporting Standards and GAAP. The core principle of the new standard is for companies to recognize revenue to depict the transfer of goods or services to customers in amounts that reflect the consideration to which the company expects to be entitled in exchange for those goods or services. The new standard also will result in enhanced disclosures about revenue, provide guidance for transactions that were not previously addressed comprehensively, and improve guidance for multiple-element arrangements. ASU 2014-09 will be effective in the first quarter of fiscal 2018 and may be applied on a full retrospective or modified retrospective approach. The Company is currently evaluating the impact of implementation of this standard on its financial statements. In August 2014, the FASB issued ASU 2014-15, “Presentation of Financial Statements – Going Concern”, which provides guidance on determining when and how to disclose going-concern uncertainties in the financial statements. The new standard requires management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued. An entity will be required to provide certain disclosures if conditions of events raise substantial doubt about the entity’s ability to continue as a going concern. The ASU applies to all entities and is effective for annual periods ending after December 15, 2016, and interim periods thereafter, with early adoption permitted. We are currently evaluating the impact of the adoption of ASU 2014- 15 on our consolidated financial statements and have not yet determined when we will adopt the standard. In July 2015, the Financial Accounting Standards Board (FASB) issued guidance which requires inventory within the scope of the standard to be measured at the lower of cost and net realizable value. Previous guidance required inventory to be measured at the lower of cost or market (where market was defined as replacement cost, with a ceiling of net realizable value and floor of net realizable value less a normal profit margin). The updated guidance is effective for interim and annual reporting periods beginning after December 15, 2016, with early adoption permitted. The Company is currently evaluating the impact, if any, the adoption of this standard will have on the consolidated financial statements. In February 2016, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update ASU 2016-02, Leases (Topic 842). Current US generally accepted accounting principles (GAAP) requires lessees and lessors to classify leases as either capital leases or operating leases. Lessees recognize assets and liabilities for capital leases but do not recognize assets and liabilities for operating leases. ASU 2016-02 requires lessees to recognize assets and liabilities for all leases (with an exception for short-term leases). The new FASB guidance will be effective for fiscal years beginning after December 15, 2018, and interim periods thereafter. The Company is currently evaluating the impact, if any, the adoption of this standard will have on the consolidated financial statements. 39 Results of Operations for Fiscal Years Ended December 31, 2015 and December 31, 2014 The following table compares the Company’s consolidated statements of operations data for the years ended December 31, 2015 and 2014. Years Ended December 31, 2015 2014 Dollar Change % Increase (Decrease) Sales of Products Sales of Engineering Services $ 2,544,153 205,831 $ 2,474,559 557,517 $ 69,594 (351,686) Total Sales 2,749,984 3,032,076 (282,092) Cost of Sales — Products Cost of Sales — Engineering Services Total Cost of Sales Gross Profit Gross Margin % Operating Expenses: Research and Development Selling and Marketing General and Administrative Depreciation and Amortization Impairment of Patents and Trademarks 2,101,466 82,332 1,884,678 217,233 216,788 (134,901) 2,183,798 2,101,911 81,887 566,186 930,165 (363,979) 21% 31% 3,595,437 1,798,041 6,120,101 380,841 13,222 1,752,560 1,232,520 2,593,384 279,317 104,716 1,842,877 565,521 3,526,717 101,524 (91,494) Loss from Operations (11,341,456) (5,032,332) (6,309,124) Other Income (Expense) Other Taxes Foreign Exchange Loss Interest Income and Gain on Debt Conversions and Extinguishment Loss on Derivative Valuation Amortization of Senior Term Debt Discount Interest Expense (54,432) (277) (83,419) (2,713) 28,987 2,436 20,790 (1,098,465) (798,415) (155,223) 29,262 (2,194,001) (393,525) (192,130) (8,472) 1,095,536 (404,890) 36,907 Total Other Income (Expense) (2,086,022) (2,836,526) 750,504 Loss Before Provision for Income Taxes Provision for Income Taxes (13,427,478) (7,868,858) — — (5,558,620) — Net Loss $ (13,427,478) $ (7,868,858) $ (5,558,620) 3% (63)% (9)% 12% (62)% 4% (39)% (10)% 105% 46% 136% 36% (87)% 125% (35)% (89)% (29)% (50)% 103% (19)% 26% (71)% — (71)% Sales. While overall product sales for the year ended December 31, 2015 were just 3% higher than the same period in 2014, there were changes in the composition of these product revenues. The Wrap Video Eyewear products, used for Video Viewing, Augmented Reality, and Virtual Reality applications, were phased out in early 2015 and as a consequence we had very limited quantities left for sale in the 2015 period as compared to the 2014 period. As a result sales of Video Eyewear, AR, and VR products decreased by 65% over the comparative period in 2014 and represented just 8% of revenues for 2015 as compared to 20% of revenues in 2014. Sales of M100 Smart Glasses rose 13% during 2015 and represented 67% of product revenues as compared to 54% in the 2014 period. Waveguide display engine shipments were 14% of revenues for the 2015 period versus Nil in comparative 2014 period. Sales from our engineering services for the year ended December 31, 2015, was $205,831 compared to $557,517 in the same period in 2014. The decrease is primarily the result completion of US military engineering services program in early 2015 with no follow on military engineering programs, while in 2014 approximately 56% of engineering services revenues were to the US military. 40 Cost of Sales and Gross Margin. Cost of product revenues and engineering services is comprised of materials, components, labor, warranty costs, freight costs, manufacturing overhead, software royalties, and the non-cash amortization of software development costs related to the production of our products and rendering engineering services. The net lower gross margin percentage earned in 2015 was primarily the result of increased software development costs amortization and software royalties, some of which are annual minimums in 2015 as compared to 2014. We began to amortize software development costs in the fourth quarter of 2014, and 2015 represented the first full year of amortization. Component of Cost of Sales Product Cost of Sales Manufacturing Overhead Warranty Costs Amortization of Software Costs Software Royalties Total Cost of Sales – Products Gross Profit – Product Sales $ Year Ended December 31, 2015 1,168,601 410,149 92,236 286,450 144,030 As % Related Sales Year Ended December 31, 2014 1,175,100 481,390 104,465 71,613 52,110 46% $ 16% 4% 11% 6% As % of Related Sales Dollar Change (6,499) (71,241) (12,229) 214,837 91,920 48% $ 19% 4% 3% 2% $ $ 2,101,466 83% $ 1,884,678 76% $ 216,788 442,687 17% $ 589,881 24% $ (147,194) Research and Development. Our research and development expenses consist primarily of compensation costs for personnel, related stock compensation expenses, third party services, purchase of research supplies and materials, and consulting fees related to research and development costs. Software development expenses to determine technical feasibility before final development and ongoing maintenance that are not capitalized are included in research and development costs. Comparing the research and development costs for the year ended December 31, 2015 versus the same period in 2014, there was an increase in 2015 salary, benefits and stock compensation expenses of $1,054,104, primarily the result of additional R&D staff versus the same period in 2014 when $189,231 of salaries related to software development costs were capitalized; hiring expenses of $182,200 in 2015 compared to $395 in 2014; an increase in project development and research costs of $521,964 primarily related to the new iWear Video Headphones, waveguide research and other new product development and a $119,893 increase in travel costs, primarily to and from Asia related to the commencement of new third party product manufacturing services in China. Selling and Marketing. Selling and marketing costs consist of trade show costs, advertising, travel costs, sales staff compensation costs, consulting fees and sales commissions paid to full-time staff and outside consultants. These costs increased overall for the year ended December 31, 2015 by $565,521 as compared to the same period in 2014 primarily due to the following main factors: higher personnel salary costs and new staff additions totaling $301,172, increased trade show, advertising and public relations costs of $240,145 and a $23,578 increase in website support costs. General and Administrative. General and administrative costs include professional fees, investor relations (IR) costs including shares and warrants issued for IR services, salaries and related stock compensation, travel costs, office and rental costs. These costs increased for the year ended December 31, 2015 as compared to the same period in 2014 primarily because of higher non-cash compensation expense related to stock awards totaling $1,375,000 to our officers and directors awarded in January 2015; increased IR activities of $1,244,797, inclusive of a non-cash expense of $1,043,613 for shares of common stock and warrants awarded to consultants; $221,807 increase in professional fees, of which $100,000 was for a stock award to our attorneys in January 2015; $71,765 in increased travel costs; $106,450 increase in fees paid to our external board members as compared to the 2014 period when only $31,600 were paid; and increased salary and benefits costs of $145,302. Of the overall $3,526,717 increase in 2015 over 2014, a total of approximately $2,804,522 was non-cash share and warrant compensation expense, leaving a net increase of approximately $722,195 as the result of cash general and administrative expenses described above. 41 Depreciation and Amortization. Depreciation and amortization expense for the year ended December 31, 2015 was $380,841 as compared to $279,317 in the same period in 2014, an increase of $101,524. The increase in depreciation and amortization expense is due to new investments in depreciable assets during 2015. Other Income (Expense). Total other expense was $2,086,022 for the year ended December 31, 2015 compared to an expense of $2,836,526 in the same period in 2014. The largest expense for the 2015 period was the loss of $1,098,465 on the derivative liability valuation mark-to-market revaluation for 2015 versus a loss of $2,194,001 in 2014. We incurred $798,415 in expenses for the amortization of term debt discounts and deferred issuance costs in 2015 as compared to $393,525 in 2014, when the June 2014 Notes were only issued half way through comparative year’s twelve month period. The provision for other taxes for 2015 was $54,432 compared to $83,419 for 2014. The composition of each year’s other taxes provision was primarily for franchise taxes payable to the State of Delaware, our state of incorporation, which has decreased somewhat due to the reduction in authorized capital effected in June 2014. The balance represents Japanese branch taxes which currently average approximately $12,000 per annum. Provision for Income Taxes. There were no provisions for income taxes in 2015 or 2014. Liquidity and Capital Resources As of December 31, 2015, we had cash and cash equivalents of $11,877,058, an increase of $11,792,091 from $84,967 as of December 31, 2014. At December 31, 2015, we had current assets of $16,530,211 compared to current liabilities of $1,802,122 which resulted in a working capital position of $14,728,089. As at December 31, 2014 we had a negative working capital position of $1,427,139. Our current liabilities are comprised principally of accounts payable and accrued expenses. Operating Activities. We used $11,668,079 of cash for operating activities in 2015 compared to $4,609,050 in 2014. In addition to the net loss adjusted for non-cash items, working capital operating uses for 2015 resulted from a $2,437,149 increase in inventory and a $1,276,132 reduction in accounts payable. The working capital operating items for 2014 resulted from a $237,006 decrease in accounts payable, a $168,613 increase in accounts receivable and a $208,367 increase in prepaid expenses. Investing Activities. Investing activities used $2,084,739 of cash for 2015 as compared to a use of $901,340 for the same period in 2014. In 2015, we used $1,892,831 of cash primarily for the purchase of lease improvements and equipment for our new office and manufacturing facility as well as additions to product tooling, as compared to $195,903 primarily for purchases of computer equipment and tooling additions for the same period in 2014. The costs of registering our intellectual property rights were $191,908 in 2015 and $86,647 in the same period in 2014. We invested $618,790 in software development costs related to our products in 2014, as compared to $-0- in 2015. Financing Activities. We generated $25,544,909 of cash from financing activities in 2015 as compared to generating $5,285,217 of cash from financing activities in 2014. During the year ending December 31, 2015, the primary sources of cash from financing activities were the proceeds of $24,813,000 from the sale of Series A Preferred Stock on January 2, 2015 to Intel Corporation (discussed below), less direct offering costs of $214,169 and the cash proceeds of $1,272,627 from warrant exercises. During 2014, the primary source of cash were the gross proceeds from the sale of senior convertible notes of $3,000,000, less direct offering associated costs of $139,340, the proceeds of $2,682,669 from the exercise of warrants for cash, less the repayment of $345,942 in short-term notes payable. Capital Resources. As of December 31, 2015, we had a cash balance of $11,877,058, an increase of $11,792,091 from $84,967 as of December 31, 2014. The Company had no outstanding balances under any line of credits as of December 31, 2015. 42 On January 2, 2015 (the “Series A Closing Date”), we entered into and closed a Series A Preferred Stock Purchase Agreement (the “Series A Purchase Agreement”) with Intel Corporation (the “Series A Purchaser”), pursuant to which we issued and sold to the Series A Purchaser, an aggregate of 49,626 shares of the Company’s Series A Preferred Stock, at a purchase price of $500 per share, for an aggregate purchase price of $24,813,000 (the “Series A Private Placement”). Each share of Series A Preferred Stock is convertible, at the option of the Series A Purchaser, into 100 shares of the Company’s common stock (determined by dividing the Series A Original Issue Price of $500 by the Series A Conversion Price. The Series A Conversion Price is $5.00, subject to adjustment in the event of stock splits, dividends or other combinations). Each share of Series A Preferred Stock is entitled to receive dividends at a rate of 6% per year, compounded quarterly and payable in cash or in kind, at the Company’s sole discretion. In the event of the liquidation, dissolution or winding up of the Company, each share of Series A Preferred Stock is entitled to a liquidation preference equal to one times (1x) the Series A Purchaser’s original per share purchase price, plus a right to receive an additional liquidation distribution together with the common stock holders pro rata on an as converted basis, but not in excess of $1,000 per share in the aggregate (subject to adjustment for accrued but unpaid dividends and in the event of stock splits, dividends or other combinations). Each share of Series A Preferred Stock is entitled to vote with the holders of the Company’s common stock on matters presented to its stockholders, and is entitled to cast such number of votes equal to the whole number of shares of common stock into which such shares of Series A Preferred Stock are convertible. The holders of record of the Series A Preferred Stock are entitled to nominate and elect 2 directors to the Company’s Board of Directors (the “Board Election Right”), at least one of whom is required to qualify as an “independent” director, as that term is used in applicable exchange listing rules. The Board Election Right with respect to the independent director will terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 40% of the original amount purchased by the Series A Purchaser. The Board Election Right with respect to the second director shall terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 20% of the original amount purchased by the Series A Purchaser. The Company also granted the Series A Purchaser the right to have a board observer at meetings of the Company’s Board of Directors and committees thereof. As of the date of the filing of this report, the Series A Purchaser has not requested the appointment of its 2 directors nor asked to have its observer attend board meetings. For as long as at least 25% (or 12,406 shares) of the Series A Preferred Stock is outstanding, the Company may not, without the consent of holders of at least 60% of the then outstanding shares of Series A Preferred Stock, take certain actions, including but not limited to: (i) liquidate, dissolve, or wind up the business and affairs of the Company; (ii) amend, alter or repeal any provision of its charter or bylaws in a manner that adversely effects the rights of the Series A Preferred Stock; (iii) create or issue any capital stock that is equal to or senior to the Series A Preferred Stock with respect to preferences; (iv) create or issue any debt security, subject to certain exceptions; (v) pay off any debt obligation prior to its stated maturity date; or (vi) enter into any stockholders rights plan or similar arrangement or take other actions that may limit actions that holders of a majority of the Series A Preferred Stock can take under Section 203 (“Section 203”) of the Delaware General Corporation Law, as well as such other customary provisions protecting the rights of the holder of the Series A Preferred Stock, as are outlined in the Certificate of Designation. The Series A Purchaser has the right to participate in any proposed issuance by the Company of its securities, subject to certain exceptions (the “Participation Right”). In the event the Series A Purchaser is not afforded the opportunity to exercise its Participation Right, the Series A Purchaser will have the right, but not the obligation, up to two times per calendar year, to acquire additional securities from the Company in such amount as is sufficient to maintain the Series A Purchaser’s ownership percentage in the Company, calculated immediately prior to such applicable financing, at a purchase price equal to the per share price of the Company’s securities in such applicable financing. Additionally, the Company’s Board of Directors approved the Series A Private Placement for purposes of Section 203, which prohibits transactions with interested stockholders under Delaware state law. The Board of Directors approved the exemption of the Series A Purchaser from Section 203 with respect to any future business combinations or other transactions covered by Section 203 and, for such purposes, the Series A Purchaser will not be deemed an “interested stockholder”. Furthermore, the Board of Directors has waived any claims based on the corporate opportunity doctrine under Delaware state law or with respect to any duty of the Series A Purchaser, the directors appointed pursuant to the Board Election Right or the board observer, to disclose any information regarding the Series A Purchaser that may be of interest to the Company or permit the Company to participate in any projects or investments based on such information. 43 In connection with the Series A Private Placement, the Company entered into an investor’s rights agreement with the Series A Purchaser, pursuant to which the Company agreed to file a “resale” registration statement with the Securities and Exchange Commission (the “SEC”) covering all shares of common stock issuable upon conversion of the Series A Preferred Stock sold in the Series A Private Placement. The Company filed the registration statement on February 12, 2015 and the registration statement was declared effective by the SEC on February 17, 2015. In connection with the Series A Private Placement, each of the holders of notes issued by the Company on June 3, 2014 (the “June 2014 Notes”) agreed to irrevocably waive their rights to anti-dilution protection under Section 5(b) of the June 2014 Notes in the event the Company issues additional securities at a per share price lower than the conversion price of the June 2014 Notes (the “June 2014 Note Waiver”). The obligations of the holder of the June 2014 Notes under the June 2014 Note Waiver will be binding on all assignees of the June 2014 Notes. Additionally, holders of the June 2014 Notes waived their rights of participation with respect to the Series A Private Placement and agreed to subordinate their participation rights to the Series A Purchaser’s Participation Right. In connection with the Series A Private Placement, holders of approximately 86% of outstanding warrants issued by the Company in its public offering on August 5, 2013 and in connection with the conversion by certain holders of the Company’s outstanding debt in connection with the Company’s public offering (collectively, the “Public Offering Warrants”) agreed to irrevocably waive their rights to anti-dilution protection under Section 2(b) of the Public Offering Warrants in the event the Company issues additional securities at a per share price lower than the exercise price of the Public Offering Warrants (the “Public Offering Warrant Waiver”). The obligations of the holder of the Public Offering Warrants under the Public Offering Warrant Waiver will be binding on all assignees of the Public Offering Warrants. We will need to continue to increase our product sales to achieve positive cash flow from operations. We have developed an operating plan which includes the expansion of our existing premises and personnel resources. As part of this plan we relocated our corporate offices, research and development facilities and manufacturing to a facility approximately four times the size of our prior facility during October 2015. This relocation includes the installation of new cleanroom space to meet the expanded production needs of our waveguide optics. During 2016 new personnel resources will be added primarily focused on research and development staff and select marketing and sales personnel. We also intend adding finance personnel to improve the Company’s financial reporting controls. Such expenditures, along with further future net operating losses, product tooling expenses, and related working capital investments, will be the principal uses of our cash. Late in the 4th quarter of 2015 we attempted to start mass production of our new iWear Video Headphones, but unfortunately we were not able to produce them at anywhere near our planned production rates. The iWear utilizes very unique components that are required for the large magnifications necessary to produce a large 55 degree FOV from only a 0.24” micro-display. This has placed very high quality demands on each component in the optics chain of the iWear. It has taken us to March 2016 to finally resolve all of the issues with components from vendors in Finland, Japan, USA and China. Because of these issues, production has been very limited with yields that are unacceptable to produce economically in higher volumes. Although we have experienced strong customer interest in Vuzix iWear, we chosen not to actively promote and market this new product yet and create further possible customer frustrations by our slowness in delivery. As of the end of Q1 2016 we are finally starting to build near our planned volume production levels up with yields now approaching 90%. This delay in the start of volume production has clearly put our revenue expectations of the iWear behind schedule, both for our completed 2015 fiscal year and for the first quarter of fiscal 2016. We expect from April 2016 onwards that production will accelerate as will our planned marketing and sales activities around iWear. Even with these startup production issues, through this period we have been able to continue our efforts with our growing software developer community. We now have over 120 titles that support the iWear with many more expected. At CES in January 2016, we received 8 product innovation awards for several new products that should commence shipping in the second half of fiscal 2016. Many of these awards were for our next generation enterprise based Smart Glasses, the M300 and M3000. These new devices are being met very favorably based on initial customer and market feedback. Both these Smart Glasses will offer significant enhancements that have come from the last 2 years of in the field use of the existing M100 Smart Glasses by our customers. It appears that many of our current customers using the M100 that are preparing for larger rollouts of smart glasses in their enterprise environments, may or will pause doing so in anticipation of the M300 and the waveguide based M3000 Smart Glasses. To help offset customer purchasing hesitation, we announced in early February 2016 a promotional package that allows such customers to easily upgrade from M100 to M300 when it is available or place pre-orders for the M300 and shortly for the M3000 Smart Glasses. 44 Generally Smart Glass adoption by larger enterprise for broader roll-outs based on successful pilots continues to be slow. Some customers are waiting and need the improvements offered by the upcoming M300 and M3000 Smart Glasses. And, based on discussions with our M100 customers, many are planning on moving from smaller pilots to significant rollouts with our VAR partners and our direct in-house sales team, commencing in 2016. In Q2 of 2016 we expect growing revenues from our iWear Video Headphones, continuing sales of our M100s and possibly late in Q2, the first sales of our new M300s. We anticipate that by fall 2016 Vuzix should have as many as 4 new products in the market as compared to the same period in 2015. The iWear Video Headphones, the M300 and M3000 Smart Glasses and our first B3000 binocular in a sunglasses format in late Q4. To help ensure a timely and effective transition from R&D into production we have entered into a new development and contract manufacturing relationship with a Tier 1 manufacturing services company to help us build out our next generation M300/M3000 Smart Glasses. First volume production runs will take place in their U.S. based plants to help us achieve volume production more efficiently and faster. Additionally management intends to continue ahead with its waveguide development and the ramp up for volume production. Pursuant to these activities we are negotiating third party and OEM collaboration and development agreements in order to better leverage our successes. As a result we do not expect to achieve a positive net income for the year ending December 31, 2016, however we expect with our new products and expected increased sales that our operating losses will be significantly less than for our 2015 fiscal year. We believe our existing cash and cash equivalent balances and cash flow from future operations will be sufficient to meet our working capital and capital expenditure needs for the foreseeable future even with continued operating losses similar in size to the amounts reported during for the years ended December 31, 2015 or the year ended December 31, 2014. There can however be no assurance that we will be able to generate positive cash flows from operations in the future. Item 7A. Quantitative and Qualitative Disclosures about Market Risk. Not required for a smaller reporting company Item 8. Financial Statements and Supplementary Data The information required by this item is incorporated herein by reference to pages F-1 through F-27 of this annual report and is indexed under Item 15(a)(1) and (2). Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure None. Item 9A. Controls and Procedures The information contained in this section covers management’s evaluation of our disclosure controls and procedures and our assessment of our internal control over financial reporting as of December 31, 2015. (a) Evaluation of Disclosure Controls and Procedures Our management, including our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this annual report as required by Rule 13a-15 under the Securities Exchange Act of 1934 (the “Exchange Act”). Disclosure controls and procedures are those controls and other procedures that are designed to ensure that information required to be disclosed in reports filed or submitted under the Exchange Act is recorded, processed, summarized, and reported, within the time periods specified by the rules and forms promulgated by the SEC. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that such information is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. As a result of this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were not effective as of December 31, 2015 because of the material weaknesses set forth below. 45 (b) Management’s Annual Report on Internal Control Over Financial Reporting This annual report does not include an attestation report of our registered public accounting firm due to exemption provisions established by the rules of the Securities and Exchange Commission for smaller reporting companies. Our management is responsible for establishing and maintaining adequate “internal control over financial reporting,” as defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act. Our system of internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external reporting purposes in accordance with US GAAP. Our internal control over financial reporting includes those policies and procedures that (a) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (b) provide reasonable assurance that transactions are recorded as necessary to permit preparation of consolidated financial statements in accordance with US GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (c) provide reasonable assurance regarding prevention or timely detection of unauthorized use, acquisition, or disposition of our assets that could have a material effect on the consolidated financial statements. Because of its inherent limitations, internal control over financial reporting, no matter how well conceived or operated, can only provide reasonable assurance, not absolute assurance, that the objectives of the control system are met. Such controls may not prevent or detect every misstatement. An evaluation of effectiveness is subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may decrease over time. Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our internal control over financial reporting as of December 31, 2015. In making this assessment, we utilized the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control — Integrated Framework (2013). A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. During the fall of 2015, we had a detailed review and assessment of our controls and procedures currently in place prepared by external consultants. The results of this SOX Readiness Assessment work has been reviewed by management and our external auditors. As a result we have developed, with input from the SOX consultants, a proposed system of internal controls over financial reporting sufficient to remediate existing control deficiencies and fully implement the system of internal controls over financial reporting that were designed in Phase I of this SOX readiness project. Our management is now preparing plans for implementing these Phase II changes in our controls and procedures as a result. As of December 31, 2015, we have not completed the development, assessment, implementation and testing of all the changes in controls and procedures that we believe are necessary to conclude that the material weakness has been remediated and, therefore, our management has concluded that we cannot assert that the control deficiencies relating to the reported material weakness have been effectively remediated. As a result, our CEO and CFO have concluded that our internal control over financial reporting is ineffective as of December 31, 2015 because of the material weaknesses set forth below. 46 The following is a summary of our material weaknesses as of December 31, 2015: Financial Reporting and Close Process Our current financial close process does not ensure accurate financial reporting on a timely basis. We also did not maintain effective controls over the period-end financial close and reporting processes in relation to the consolidation of our subsidiary’s financial information. The specific deficiencies contributing to this material weakness related (a) to inadequate policies and procedures, (b) ineffective procedures and controls over journal entries, accruals and reserves, (c) inadequate controls and procedures related to the timely preparation and review of account reconciliations, (d) inadequate segregation of duties, (e) inadequate controls over cut-off procedures, (f) deficiencies in end-user computing controls of critical spreadsheets, and (g) an insufficient complement of personnel with appropriate levels of knowledge and experience. Due to the actual and potential errors on financial statement balances and disclosures, management has concluded that these deficiencies in internal controls over the period-end financial close and reporting processes constituted a material weakness in internal control over financial reporting. We intend to establish and document financial close processes and procedures including responsibilities and due dates. We also intend to commence utilizing a closing checklist to ensure all procedures are performed and appropriate reviews are completed on a timely basis each quarter and year-end period. Additionally, we intend to implement controls over critical spreadsheets, including change control, input control, access and data security and appropriate review procedures. Further, we intend to seek additional resources with strong accounting and reporting experience when financial resources are available. Segregation of Duties There is limited segregation of duties which could result in a material misstatement in our financial statements. Given our staff levels, certain duties within the accounting and finance department cannot be properly segregated. However, we believe that none of these segregation of duty deficiencies resulted in material misstatement to the financial statements as we rely on certain compensating controls, including periodic substantive review of the financial statements by the Chief Executive Officer, Chief Financial Officer, Audit Committee and Board of Directors. Monitoring of Subsidiaries We have not designed adequate monitoring controls related to our European subsidiary or Japanese branch sales office, such that we can be assured that a material misstatement of financial results would be prevented or detected on a timely basis. Inventory We have identified weaknesses in our inventory controls as follows: · Documented processes and controls are insufficient and are not working effectively for several key inventory processes · · including inventory adjustments and reserves for excess, defective and obsolete inventory. Supervision and checking of physical counts. Inventory valuation processes and controls are not sufficiently documented and are not working effectively including costs to be expensed versus inventoried and maintenance of adequate supporting documentation for current unit costs and bill of materials. Internal Controls Procedures and Risk Assessment Program We have concluded that formal written internal control policies and procedures do not currently exist for all areas within our operations. A well-established and documented internal control structure is pertinent to our ability to maintain accurate books and records, prevent and detect fraud, maintain segregation of duties, report timely financial results and to properly comply with management’s requirements to report on the effectiveness of internal controls over financial reporting pursuant to the Sarbanes-Oxley Act. In determining key controls and appropriate internal controls for us management needs to further develop its risk assessment process, including a fraud risk assessment and monitoring program, that is appropriate for our size and complexity, to assess the risks of material misstatement in the significant accounts and disclosures and related assertions and to ensure implementation of controls to prevent or detect errors or fraud that could result in material misstatements. 47 (c) Change in Internal Control Over Financial Reporting No change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) occurred during the three months ended December 31, 2015 that has materially affected, or is likely to materially affect, our internal control over financial reporting. Item 9B. Other Information None. Item 10. Directors, Executive Officers and Corporate Governance PART III The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto. Item 11. Executive Compensation The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto, except, however, the section entitled “Compensation Committee Report” shall not be deemed to be “soliciting material” or to be filed with the Securities and Exchange Commission or subject to Regulation 14A or 14C, or to the liabilities of Section 18 of the Exchange Act of 1934, as amended. Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto. Item 13. Certain Relationships and Related Transactions, and Director Independence The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto. Item 14. Principal Accounting Fees and Services The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto. 48 PART IV Item 15. Exhibits and Financial Statement Schedules (a) The following documents are filed as part of this report (1) Financial Statements Report of Freed Maxick CPAs, P.C., Independent Registered Public Accounting Firm Consolidated Balance Sheets as of December 31, 2015 and 2014 Consolidated Statements of Stockholders’ (Deficit) Equity For The Years Ended December 31, 2015 and 2014 Consolidated Statements of Operations For the Years Ended December 31, 2015 and 2014 Consolidated Statement of Cash Flows For the Years Ended December 31, 2015 and 2014 Notes to Consolidated Financial Statements (2) Financial Statement Schedules Page F-2 F-3 F-4 F-5 F-6 F-7 Financial statement schedules have been omitted since they are not required, not applicable or the information is otherwise included. (3) Exhibits A list of exhibits filed with this annual report is set forth in the Exhibit Index and is incorporated in this Item 15(a)(3) by reference. 49 VUZIX CORPORATION INDEX TO CONSOLIDATED FINANCIAL STATEMENTS Report of Freed Maxick CPAs, P.C., Independent Registered Public Accounting Firm Consolidated Balance Sheets — For the Years Ended December 31, 2015 and 2014 Consolidated Statements of Stockholders’ Equity (Deficit) — For The Years Ended December 31, 2015 and 2014 Consolidated Statements of Operations — For the Years Ended December 31, 2015 and 2014 Consolidated Statements of Cash Flows — For the Years Ended December 31, 2015 and 2014 Notes to Consolidated Financial Statements Page F-2 F-3 F-4 F-5 F-6 F-7 F-1 REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM Board of Directors and Stockholders Vuzix Corporation Rochester, New York We have audited the accompanying consolidated balance sheets of Vuzix Corporation and its subsidiary (the “Company”) as of December 31, 2015 and December 31, 2014, and the related consolidated statements of operations, cash flows, and changes in stockholders’ equity (deficit) for the years then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform an audit of the Company’s internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Vuzix Corporation and its subsidiary as of December 31, 2015 and December 31, 2014, and the results of their operations and their cash flows for the years then ended, in conformity with U.S. generally accepted accounting principles. /s/ Freed Maxick CPAs, P.C. Rochester, New York March 30, 2016 F-2 VUZIX CORPORATION CONSOLIDATED BALANCE SHEETS ASSETS December 31, December 31, 2015 2014 $ 11,877,058 $ 325,694 3,349,098 369,411 608,950 16,530,211 2,015,433 515,697 501,288 84,967 383,533 911,949 156,091 422,909 1,959,449 416,965 423,489 787,738 $ 19,562,629 $ 3,587,641 Current Assets Cash and Cash Equivalents Accounts Receivable, Net Inventories, Net Manufacturing Vendor Prepayments Prepaid Expenses and Other Assets Total Current Assets Tooling and Equipment, Net Patents and Trademarks, Net Software Development Costs, Net Total Assets $ LIABILITIES AND STOCKHOLDERS’ EQUITY (DEFICIT) Current Liabilities Accounts Payable Line of Credit Notes Payable Current Portion of Long-term Debt, net of discount Current Portion of Capital Leases Customer Deposits Unearned Revenue Accrued Expenses Income and Other Taxes Payable Total Current Liabilities Long-Term Liabilities Long-Term Derivative Liability Long-Term Portion of Term Debt, net of discounts Long-Term Portion of Accrued Expenses Long-Term Portion of Accrued Interest Total Long-Term Liabilities Total Liabilities Stockholders’ Equity (Deficit) Preferred Stock — $.001 Par Value, 5,000,000 Shares Authorized; 49,626 and 0 Shares Issued and Outstanding Respectively Common Stock — $.001 Par Value, 100,000,000 Shares Authorized December 31, 2015 and 2014; 16,087,951 Shares Issued and Outstanding December 31, 2015 and 11,295,387 on December 31, 2014 Additional Paid-in Capital Accumulated Deficit Total Stockholders’ Equity (Deficit) 907,434 $ — — 55,790 — 27,847 69,481 734,497 7,073 2,183,565 112,500 37,038 128,425 16,882 120,550 53,403 699,067 35,158 1,802,122 3,386,588 240,786 1,227,550 38,333 160,967 13,541,138 976,475 — 81,451 1,667,636 14,599,064 3,469,758 17,985,652 50 — 16,088 73,665,601 (57,588,868) 11,296 29,752,083 (44,161,390) 16,092,871 (14,398,011) Total Liabilities and Stockholders’ Equity (Deficit) $ 19,562,629 $ 3,587,641 The accompanying notes are an integral part of these consolidated financial statements. F-3 CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ (DEFICIT) EQUITY VUZIX CORPORATION Preferred Stock Common Stock Additional Shares Amount Shares Amount Paid-In Capital Accumulated Deficit Total Balance — December 31, 2013 $ 9,600,453 $ 9,600 $ 23,244,639 $ (36,292,532) $ (13,038,293) Stock Issued for Services Conversion of Note Payable Exercise of Warrants Stock Compensation Expense Reclass Fair Value of Warrant Derivative Liability upon Exercise Reclass Fair Value of Derivative Liability upon Note conversion 2014 Net Loss 188,574 277,778 1,228,582 189 278 1,229 564,685 372,881 2,681,466 260,746 2,127,405 500,261 564,874 373,159 2,682,695 260,746 2,127,405 (7,868,858) 500,261 (7,868,858) Balance — December 31, 2014 $ 11,295,387 $ 11,296 $ 29,752,083 $ (44,161,390) $ (14,398,011) Exercise of Warrants Conversion of Note Payable and Interest Stock Issued for Services Warrants Issued for Services Stock Compensation Expense Common Stock Awards to Officers, Directors and Law Firm Proceeds from Preferred Stock Offering Direct Costs of Preferred Stock Offering Reclass Fair Value of Note Derivative Liability upon Waiver of Certain Anti-Dilutive Provisions Reclass Fair Value of Derivative Liability upon Waiver of Certain Anti-Dilutive Provisions Exercise of Stock Options Reclass Fair Value of Warrant Derivative Liability upon Exercise 2015 Net Loss 4,128,271 210,000 120,837 4,128 210 121 49,626 50 325,000 325 1,268,498 472,290 676,544 260,373 568,848 1,669,375 24,812,950 (214,169) 2,806,942 8,736,412 1,272,626 472,500 676,665 260,373 568,848 1,669,700 24,813,000 (214,169) 2,806,942 8,736,412 8,456 8 (8) 2,855,463 2,855,463 (13,427,478) (13,427,478) Balance — December 31, 2015 49,626 $ 50 16,087,951 $ 16,088 $ 73,665,601 $ (57,588,868) $ 16,092,871 The accompanying notes are an integral part of these consolidated financial statements. F-4 VUZIX CORPORATION CONSOLIDATED STATEMENTS OF OPERATIONS Sales of Products Sales of Engineering Services Total Sales Cost of Sales — Products Cost of Sales — Engineering Services Total Cost of Sales (exclusive of depreciation shown separately below) Gross Profit Operating Expenses: Research and Development Selling and Marketing General and Administrative Depreciation and Amortization Impairment of Patents and Trademarks Total Operating Expenses Loss from Operations Other Income (Expense) Other Taxes Investment Income Foreign Exchange Loss Amortization of Deferred Financing Costs Gain (Loss) on Debt Conversions and Extinguishment Loss on Derivative Valuation Amortization of Senior Term Debt Discount Interest Expense Total Other Income (Expense) Loss Before Provision for Income Taxes Provision for Income Taxes Net Loss Preferred Stock Dividends Loss Attributable to Common Stockholders Basic and Diluted Loss per Share Weighted-average Shares Outstanding Basic and Diluted For Years Ended December 31, 2015 2014 $ 2,544,153 $ 205,831 2,474,559 557,517 2,749,984 3,032,076 2,101,466 82,332 1,884,678 217,233 2,183,798 2,101,911 566,186 930,165 3,595,437 1,798,041 6,120,101 380,841 13,222 1,752,560 1,232,520 2,593,384 279,317 104,716 11,907,642 (11,341,456) 5,962,497 (5,032,332) (54,432) 20,790 (277) (46,447) — (83,419) — (2,713) (26,819) 29,262 (1,098,465) (751,968) (155,223) (2,194,001) (393,525) (165,311) (2,086,022) (2,836,526) (13,427,478) — (7,868,858) — $ (13,427,478) $ (1,514,081) (14,941,559) (7,868,858) — (7,868,858) $ (0.97) $ (0.75) 15,408,724 10,476,971 The accompanying notes are an integral part of these consolidated financial statements. F-5 VUZIX CORPORATION CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS Cash Flows from Operating Activities Net Loss Non-Cash Adjustments Depreciation and Amortization Amortization of Software Development Costs in cost of sales products Impairment of Patents and Trademarks Common Stock Awards Compensation Expense Stock-Based Option Compensation Expense Amortization of Term Debt Discount Amortization of Debt Issuance Costs Gain on Extinguishment of Debt for Note Conversions Common Stock and Warrants Issued for Services Loss on Derivative Valuation (Increase) Decrease in Operating Assets Accounts Receivable Inventories Vendor Prepayments Prepaid Expenses and Other Assets Increase (Decrease) in Operating Liabilities Accounts Payable Accrued Expense Customer Deposits Unearned Revenue Income and Other Taxes Payable Accrued Compensation Accrued Interest & Long-Term Accrued Interest Converted For the Years Ended December 31, 2015 2014 $ (13,427,478) $ (7,868,858) 380,841 286,450 13,222 1,669,700 568,848 751,968 46,447 — 1,057,074 1,098,465 57,839 (2,437,149) (213,320) (306,078) (1,276,132) 143,830 (92,703) 16,078 (28,085) (70,067) 92,171 279,317 71,613 104,716 — 260,747 368,223 52,121 (29,262) 395,205 2,194,001 (168,613) 41,679 — (208,367) (237,006) 1,216 (10,528) 13,701 (40,693) 68,116 103,622 Net Cash Flows Used in Operating Activities (11,668,079) (4,609,050) Cash Flows from Investing Activities Purchases of Tooling and Equipment Investments in Software Investments in Patents and Trademarks Net Cash Used in Investing Activities Cash Flows from Financing Activities Proceeds from Exercise of Warrants Repayment of Capital Leases Repayment of Long-Term Debt and Notes Payable Proceeds from Senior Convertible Debt Issuance Costs on Senior Convertible Debt Proceeds from Preferred Stock Offering Issuance Costs on Preferred Stock Offering Net Change in Lines of Credit Net Cash Flows Provided by Financing Activities Net Increase (decrease) in Cash and Cash Equivalents Cash and Cash Equivalents — Beginning of Period Cash and Cash Equivalents — End of Period Supplemental Disclosures Interest Paid Common Stock and Warrants Issued for Services, Classified as Prepaid Expense Accrued Interest Converted into Common Stock Conversion of Term Debt into Common Stock Discount on Senior Convertible Debt attributed to embedded Conversion Price Adjustment Option (1,892,831) — (191,908) (195,903) (618,790) (86,647) (2,084,739) (901,340) 1,272,627 (16,882) (197,167) — — 24,813,000 (214,169) (112,500) 2,682,669 (24,670) (345,942) 3,000,000 (139,340) — — 112,500 25,544,909 5,285,217 11,792,091 84,967 (225,173) 310,140 $ 11,877,058 $ 84,967 $ $ $ $ $ 41,194 $ 936,937 $ 12,655 $ 459,845 $ — $ 88,508 564,873 — 625,000 1,938,988 Reclassification of Derivative Liability to Paid-In Capital upon Waiver of Certain Anti-Dilutive Unamortized Discount Upon Conversion of Term Debt Reclassification of Derivative Liability Upon Warrant Exercises Provisions of Warrants and Convertible Debt $ $ $ 11,543,354 $ — $ 2,855,463 $ 2,627,666 222,580 — The accompanying notes are an integral part of these condensed consolidated financial statements. F-6 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS Note 1 — Summary of Significant Accounting Policies Operations Vuzix Corporation (the Company) was formed in 1997 under the laws of the State of Delaware and maintains its corporate offices in Rochester, New York. The Company is engaged in the design, manufacture, marketing and sale of devices that are worn like eyeglasses and which feature built-in video screens that enable the user to view video and digital content, such as movies, computer data, the Internet or video games. Our products (known commercially as “Video Eyewear”) are used to view high resolution video and digital information from portable devices, such as cell phones, portable media players, gaming systems and laptop computers and from personal computers. Our products provide the user with a virtual viewing experience that emulates viewing a large screen television or desktop computer monitor practically anywhere, anytime. Principles of Consolidation The consolidated financial statements include the accounts of the Company and its wholly owned subsidiary, Vuzix Europe. All significant inter-company transactions have been eliminated. Certain prior year amounts have been reclassified to be consistent with current year presentation. Segment Data, Geographic Information and Significant Customers The Company is not organized by market and is managed and operated as one business. A single management team that reports to the chief operating decision maker comprehensively manages the entire business. The Company does not operate any material separate lines of business or separate business entities. Accordingly, the Company does not accumulate discrete information, other than product revenue and material costs, with respect to separate product lines and does not have separately reportable segments as defined by FASB ASC Topic 280, “Disclosures about Segments of an Enterprise and Related Information,” Shipments to customers outside of the United States approximated 32% and 43% of sales in 2015 and 2014, respectively. No single international country represented more than 10% of revenues. One United States based customer represented 17% of revenues in 2015 and 0% in 2014. This customer accounted for 89% and 0% of accounts receivable at December 31, 2015 and 2014, respectively. The Company does not maintain significant amounts of long-lived assets outside of the United States other than tooling held by its third party manufacturers, primarily in China. F-7 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) The Company has at times had a concentration of sales to the U.S. government, which amounted to approximately 4% and 10% of sales in 2015 and 2014, respectively. Accounts receivable from the U.S. government accounted for 0% and 6% of accounts receivable at December 31, 2015 and 2014, respectively. Foreign Currency Transactions The British Pound is the functional currency of the Company’s foreign subsidiary. Gains and losses arising upon settlement of foreign currency denominated transactions or balances are included in the determination of net loss. The cumulative translation adjustment at December 31, 2015 and 2014 was not material. Use of Estimates The preparation of the consolidated financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at year end and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates. Concentration of Credit Risk The Company maintains its cash in bank deposit accounts, which at times may exceed federally insured limits. Cash and Cash Equivalents Cash and cash equivalents can include highly liquid investments with original maturities of three months or less. Fair Value of Financial Instruments The Company’s financial instruments primarily consists of cash and cash equivalents, accounts receivable, accounts payable, lines of credit, long-term debt and capital leases, customer deposits, accrued expenses, and income taxes payable. As of the consolidated balance sheet dates, the estimated fair values of the financial instruments were not materially different from their carrying values as presented due to both the short maturities of these instruments and that the interest rates on borrowing approximate those that would have been available for loans for similar remaining maturity and risk profiles. Accounts Receivable The Company carries its trade accounts receivable at invoice amount less an allowance for doubtful accounts. The Company establishes an allowance for uncollectible trade accounts receivable based on the age of outstanding invoices and management’s evaluation of collectability of outstanding balances. These provisions are established when the aging of outstanding amounts exceeds allowable terms and are re-evaluated at each quarter end for adequacy. In determining the adequacy of the provision, the Company considers known uncollectible or at risk receivables. There was no allowance for doubtful accounts as of December 31, 2015 and 2014. The Company does not accrue interest on past due accounts receivable unless it goes into collection. Inventories Inventories are valued at the lower of cost or market using the weighted average first-in, first-out method. The Company includes labor and overhead costs in its inventory valuation costing. The Company records provisions for excess, obsolete or slow moving inventory based on changes in customer demand, technology developments or other economic factors. The Company’s products have product life cycles that range on average from two to three years currently. At both the product introduction and product discontinuation stage, there is a higher degree of risk of inventory obsolescence. The provision for obsolete and excess inventory is evaluated for adequacy at each quarter end. The estimate of the provision for obsolete and excess inventory is partially based on expected future product sales, which are difficult to forecast for certain products. F-8 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Revenue Recognition The Company recognizes revenue from product sales in accordance with FASB ASC Topic 605 “Revenue Recognition”. Product sales represent the majority of the Company’s revenue. The Company recognizes revenue from these product sales when persuasive evidence of an arrangement exists, delivery has occurred, the sale price is fixed or determinable, and collectability is reasonably assured. The Company sells its products on terms which transfer title and risk of loss at a specified location, typically shipping point. Accordingly, revenue recognition from product sales occurs when all factors are met. If these conditions are not met, the Company will defer revenue recognition until such time as these conditions have been satisfied. The Company collects and remits sales taxes in certain jurisdictions and reports revenue net of any associated sales taxes. The Company also sells certain products through distributors who are granted limited rights of return for stock balancing against purchases made within a prior 90 day period, including price adjustments downwards that the Company implements on any existing inventory. The provision for product returns and price adjustments is assessed for adequacy both at the time of sale and at each quarter end and is based on recent historical experience and known customer claims and was not material as of December 31, 2015 or 2014. Revenue from any engineering consulting and other services is recognized at the time the services are rendered. The Company accounts for its longer-term development contracts, which to date have all been firm fixed-priced contracts, on the percentage-of-completion method, whereby income is recognized as work on contracts progresses, but estimated losses on contracts in progress are charged to operations immediately. The percentage-of-completion is determined using the cost-to-cost method. Amounts are generally billed on a monthly basis. To date all such contracts have been less than one calendar year in duration. The Company recognizes software license revenue under ASC 985-605 “Software Revenue Recognition” and under ASC 605-25 “Revenue Arrangements with Multiple Deliverables”, and related interpretations, as amended. Licensed software may be sold as a stand-alone element, with other software elements, or in conjunction with hardware products. When the Company’s products consists of more than one element, it is considered to be a multiple element arrangement (MEA). When sold as a stand-alone element, the revenue is recognized upon shipment as discussed above. When sold as part of a MEA, revenue from the licensed software is recognized when the product and embedded software is shipped to the customer. For either a single element transaction or a MEA, the Company allocates consideration to all deliverables based on their relative stand- alone selling prices. Amendments to ASC 605-25, establish a hierarchy to determine the stand-alone selling price as follows: • • • Vendor Specific Objective Evidence of the fair value (VSOE), Third Party Evidence (TPE) Best Estimate of the Selling Price (BESP) Sales which constitute a MEA are accounted for by determining if the elements can be accounted for as separate accounting units, and if so, by applying values to those units, per the hierarchy above. If VSOE is not available, management estimates the fair selling price using historical pricing for similar items, in conjunction with current pricing and discount policies. Revenue from licensed software is recognized upon shipment and in accordance with industry-specific software recognition accounting guidance. Software updates that will be provided free of charge are evaluated on a case-by-case basis to determine whether they meet the definition of an upgrade and create a multiple element arrangement. The consideration allocated to the unspecified software upgrade rights and non-software services is deferred and recognized ratably over the 24-month estimated life of the devices. The Company’s BESP for the unspecified software upgrade right and non-software services is $25 per unit for the M100 Smart Glass and had been $40 for M100 software developer kits, which became free in fall 2015 and therefore no new amounts are being deferred. F-9 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Unearned Revenue These amounts represent deferred revenue against unfulfilled deliverables of multiple-element products, including unspecified post- delivery support and software updates. Tooling and Equipment Tooling and equipment are stated at cost. Depreciation of tooling and equipment is provided for using the straight-line method over the following estimated useful lives: Computers and Software Manufacturing Equipment Tooling Furniture and Equipment 3 years 5 years 3 years 5 years Leasehold improvements are depreciated over the shorter of their expected useful life or the lease term. Repairs and maintenance costs are expensed as incurred. Asset betterments are capitalized and depreciated over their expected useful life. Patents and Trademarks The Company capitalizes the costs of obtaining its patents and registration of Trademarks. Such costs are accumulated and capitalized during the filing periods, which can take several years to complete. Successful applications that result in the granting of a patent or trademark are then amortized over 15 years on a straight-line basis. Unsuccessful applications are written off and expensed in the fiscal period where the application is abandoned or discontinued. Software Development Costs The Company capitalizes the costs of obtaining or developing its software once technological feasibility has been determined by management. Such costs are accumulated and capitalized and projects can take several years to complete. Unsuccessful or discontinued software projects are written off and expensed in the fiscal period where the application is abandoned or discontinued. Costs incurred internally in researching and developing a computer software product are charged to expense until technological feasibility has been established for the product. Once technological feasibility is established, all software costs are capitalized until the product is available for general release to customers. Judgment is required in determining when technological feasibility of a product is established. Once the product is available for general release, accumulated costs are amortized over the life of the asset. The amortization of these costs is included in cost of revenue over the estimated life of the products, which currently is estimated as 3 years using a straight-line basis. Long-Lived Assets The Company at least annually assesses all of its long-lived assets for impairment when events or circumstances indicate their carrying amounts may not be recoverable, in accordance with FASB ASC Topic 360-10, “Accounting for the Impairment or Disposal of Long-Lived Assets.” In 2015, an impairment charge of $13,222 was recorded related to abandoned patents and trademarks. In 2014, an impairment charge of $104,716 was recorded related to abandoned patents and trademarks. Research and Development Research and development costs, are expensed as incurred consistent with the guidance of FASB ASC Topic 730, “Research and Development,” and include employee related costs, office expenses, third party design and engineering services, and new product prototyping costs. Costs incurred internally in researching and developing a computer software product are charged to expense until technological feasibility has been established for the product. Shipping and Handling Costs Amounts charged to customers and costs incurred by the Company related to shipping and handling are included in net sales and cost of goods sold, respectively. F-10 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Provision for Future Warranty Costs The Company provides for the estimated returns under warranty and the costs of fulfilling our obligations under product warranties at the time the related revenue is recognized. The Company estimates the costs based on historical and projected product failure rates, historical and projected repair costs, and knowledge of specific product failures (if any). The specific warranty terms and conditions vary depending upon the country in which we do business, but generally include parts and labor over a period generally ranging from one to two years from the date of product shipment. The Company provides a reserve for expected future warranty returns at the time of product shipment or produces over-builds to cover replacements. We regularly reevaluate our estimates to assess the adequacy of the recorded warranty liabilities and adjust the amounts as necessary each quarter end and is based on historical experience of warranty claims and costs. Customer Deposits Customer deposits represents money the Company received in advance of providing a product or engineering services to a customer. All such deposits are short term in nature as the Company delivers the product, unfulfilled portions or engineering services to the customer before the end of its next annual fiscal period. These deposits are credited to the customer against product deliveries or at the completion of the customer’s order. Advertising Advertising costs are expensed as incurred and recorded in “Selling and Marketing” in the Consolidated Statements of Operations. Advertising expense for the years ended December 31, 2015 and 2014 amounted to $432,325 and $192,181, respectively. Income Taxes The Company accounts for income taxes in accordance with FASB ASC Topic 740-10, “Income Taxes.” Accordingly, the Company provides deferred income tax assets and liabilities based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities based on currently enacted tax laws. A valuation allowance is established for deferred tax assets in amounts for which realization is not considered more likely than not to occur. The Company reports any interest and penalties accrued relating to uncertain income tax positions as a component of the income tax provision. Earnings Per Share Basic earnings per share is computed by dividing the net (loss) income less accrued dividends on any outstanding preferred stock by the weighted average number of common shares outstanding for the period. Diluted earnings per share calculations reflect the assumed exercise of all dilutive employee stock options and warrants applying the treasury stock method promulgated by FASB ASC Topic 260, “Earnings Per Share” and the conversion of any outstanding convertible preferred shares or notes payable that are-in-the-money, applying the as-if-converted method. However, if the assumed exercise of stock options and warrants and the conversion of any preferred shares or convertible notes payable are anti-dilutive, basic and diluted earnings per share are the same for all periods. As a results of the net loss generated in 2015 and 2014 all outstanding instruments would be antidilutive. As of December 31, 2015 and 2014, there were 7,366,036 and 7,012,767 respectively, of common stock share equivalents potentially issuable under convertible debt agreements (excluding accrued interest), options, conversion of preferred shares (excluding accrued dividends), and warrants that could potentially dilute basic earnings per share in the future. F-11 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Stock-Based Employee Compensation The Company accounts for share-based compensation to employees and directors in accordance with FASB ASC Topic 718 “Compensation Stock Expense,” which requires that compensation expense be recognized in the consolidated financial statements for share-based awards based on the grant-date fair value using a Black-Scholes valuation model of those awards. The Company uses the fair market value of our common stock on the date of each option grant based on market price of the Company’s common shares. Stock-based compensation expense includes an estimate of forfeitures and is recognized over the requisite service periods of the awards on a straight- line or graded vesting basis, which is generally commensurate with the vesting term. Stock-based compensation expense associated with stock option grants for the years ending December 31, 2015 and 2014 was $568,848 and $260,747, respectively. The Company issues new shares upon stock option exercises. Please refer to Note 15 Stock Option Plans, for further information. Derivative Liability and Fair Value Measurements FASB ASC Topic 820, “Fair Value Measurements and Disclosures” defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles, and expands disclosures about fair value measurements. ASC 820 clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. ASC 820 permits an entity to measure certain financial assets and financial liabilities at fair value with changes in fair value recognized in earnings each period. In accordance with ASC 815-10-25, we measured the derivative liability using a Lattice pricing model at their issuance date and subsequently they are remeasured. Accordingly, at the end of each quarterly reporting date the derivative fair market value is remeasured and adjusted to current market value. Derivatives that have more than one year remaining in their life are shown as long term derivative liabilities. Significant unobservable inputs are used in the fair value measurement of the Company’s derivative liability. The primary input factors driving the economic or fair value of the derivative liabilities related to the warrants and convertible notes are the stock price of the Company’s shares, the price volatility of the shares, reset events, and exercise behavior. An important valuation input factor used in determining fair value was the expected volatility of observed share prices and the probability of projected resets in warrant exercise and note conversion prices from financing events before each security’s maturity. For exercise behavior the Company assumed that without a target price of 2 times the projected reset price or higher that the holders of the warrants and convertible notes would hold to maturity. In determining the fair value of the derivatives it was assumed that the Company’s business would be conducted as a going concern and that holding to maturity was reasonable. Further the January 2, 2015 Series A Preferred financing reduced the expected probably to near zero for price resets from financing events. Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. ASC Topic 820 establishes a three-tier fair value hierarchy which prioritizes the inputs used in measuring fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (level 1 measurements) and the lowest priority to unobservable inputs (level 3 measurements). These tiers include: o o o Level 1, defined as observable inputs such as quoted prices for identical instruments in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable such as quoted prices for similar instruments in active markets or quoted prices for identical or similar instruments in markets that are not active; and Level 3, defined as unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions, such as valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable. F-12 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Recent Accounting Pronouncements In May 2014, the Financial Accounting Standards Board issued Accounting Standards Update No. 2014-09 ("ASU 2014-09"), Revenue from Contracts with Customers, an updated standard on revenue recognition. ASU 2014-09 provides enhancements to the quality and consistency of how revenue is reported while also improving comparability in the financial statements of companies reporting using International Financial Reporting Standards and GAAP. The core principle of the new standard is for companies to recognize revenue to depict the transfer of goods or services to customers in amounts that reflect the consideration to which the company expects to be entitled in exchange for those goods or services. The new standard also will result in enhanced disclosures about revenue, provide guidance for transactions that were not previously addressed comprehensively, and improve guidance for multiple-element arrangements. ASU 2014-09 will be effective in the first quarter of fiscal 2018 and may be applied on a full retrospective or modified retrospective approach. Earlier application is permitted only as of annual reporting periods beginning after December 15, 2016, including interim reporting periods within that reporting period. The Company is still currently evaluating the impact of implementation of this standard on its financial statements. In August 2014, the FASB issued ASU 2014-15, ”Presentation of Financial Statements – Going Concern”, which provides guidance on determining when and how to disclose going-concern uncertainties in the financial statements. The new standard requires management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued. An entity will be required to provide certain disclosures if conditions of events raise substantial doubt about the entity’s ability to continue as a going concern. The ASU applies to all entities and is effective for annual periods ending after December 15, 2016, and interim periods thereafter, with early adoption permitted. We are currently evaluating the impact of the adoption of ASU 2014- 15 on our consolidated financial statements and have not yet determined when we will adopt the standard. In July 2015, the Financial Accounting Standards Board (“FASB”) issued guidance which requires inventory within the scope of the standard to be measured at the lower of cost and net realizable value. Previous guidance required inventory to be measured at the lower of cost or market (where market was defined as replacement cost, with a ceiling of net realizable value and floor of net realizable value less a normal profit margin). The updated guidance is effective for interim and annual reporting periods beginning after December 15, 2016, with early adoption permitted. The Company is currently evaluating the impact, if any, the adoption of this standard will have on the consolidated financial statements. In February 2016, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2016-02, Leases (Topic 842). Current US generally accepted accounting principles (GAAP) requires lessees and lessors to classify leases as either capital leases or operating leases. Lessees recognize assets and liabilities for capital leases but do not recognize assets and liabilities for operating leases. ASU 2016-02 requires lessees to recognize assets and liabilities for all leases (with an exception for short-term leases). The new FASB guidance will be effective for fiscal years beginning after December 15, 2018, and interim periods thereafter. The Company is currently evaluating the impact, if any, the adoption of this standard will have on the consolidated financial statements. There are no other recent accounting pronouncements that are expected to have a material impact on the consolidated financial statements. Change in method of accounting for presentation of debt issuance costs The Company changed its presentation of debt issuance costs on its financial statements in its current fiscal year as a result of FASB ASU 2015-03—Interest—Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs. This ASU requires that debt issuance costs be presented in the balance sheet as a direct deduction from the carrying amount of the related debt liability (same treatment as debt discounts). FASB ASU 2015-3 is effective for the annual periods beginning after December 15, 2015. Early adoption was permitted for financial statements that not have been previously issued and the Company has chosen to adopt this new policy early. The following financial statement line items for fiscal years 2015 and 2014 were affected by the change in accounting principle. Non-Current Assets – Net Debt Issuance Costs Total Assets Long-Term Portion of Term Debt, Net of Discount Total Long-Term Liabilities and Total Liabilities Total Liabilities and Stockholders’ Equity (Deficit) There were no changes in the Statement of Operations as a result of this change. Note 2 — Inventories, Net Inventories consisted of the following: December 31, 2015 December, 31, 2014 $ $ $ $ $ (66,074) $ (66,074) $ (66,074) $ (66,074) $ (112,521) (112,521) (112,521) (112,521) (66,074) $ (112,521) December 31, 2015 December, 31, 2014 Purchased Parts and Components Work in Process Finished Goods Less: Reserve for Obsolescence Net $ 3,069,261 $ 154,880 612,451 (487,494) 1,251,224 25,974 300,889 (666,138) $ 3,349,098 $ 911,949 F-13 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 3 — Tooling and Equipment, Net Tooling and equipment consisted of the following: Tooling and Manufacturing Equipment Leaseholds Computers and Software Furniture and Equipment Less: Accumulated Depreciation Net December 31, 2015 December 31, 2014 $ 1,082,845 $ 365,766 519,226 1,089,718 1,374,751 — 581,472 607,327 3,057,555 (1,042,122) 2,563,550 (2,146,585) $ 2,015,433 $ 416,965 Total depreciation expense for tooling and equipment for the years ending December 31, 2015 and 2014 was $294,363 and $225,267, respectively. Note 4 — Patents and Trademarks, Net Patents and Trademarks Less: Accumulated Amortization Net December 31, 2015 December 31, 2014 $ $ 867,545 $ (351,848) 697,591 (274,102) 515,697 $ 423,489 Total amortization expense for patents and trademarks for the years ending December 31, 2015 and 2014 was $86,478 and $54,050, respectively. The estimated aggregate annual amortization expense for each of the next five fiscal years is approximately $63,126. We recorded an impairment charge of $13,222 representing cost of $21,954, less accumulated amortization of $8,732 for the year ending December 31, 2015. We recorded an impairment charge of $104,716 representing cost of $166,500, less accumulated amortization of $61,784 for the year ending December 31, 2014 regarding our abandoned patents and trademarks. F-14 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 5 — Software Development Costs, Net Software Development Costs Less: Accumulated Amortization Net December 31, 2015 December 31, 2014 $ $ 859,351 $ (358,063) 859,351 (71,613) 501,288 $ 787,738 Total amortization expense for capitalized software development costs for the years ending December 31, 2015 was $286,450 and $71,613 for 2014. These costs are being amortized over 3 years and have been included in Cost of Sales – Products on the Consolidated Statement of Operations. The software was completed in September 2014. The estimated aggregate annual amortization expense for the year ending December 31, 2016 is approximately $286,000, and is approximately $215,000 in the year ending December 31, 2017. Note 6 — Line of Credit The Company had a $112,500 line of credit with interest payable at the bank’s prime rate plus 1% in 2014. The line was unsecured and personally guaranteed by an officer of the Company. The outstanding balance on this line of credit amounted to $-nil- and $112,500 at December 31, 2015 and 2014, respectively. The credit facility was terminated by the Company in August 2015. Note 7 — Notes Payable Notes payable represent promissory notes payable by the Company. December 31, 2015 December 31, 2014 Note payable to officers and shareholders of the Company. The notes bore interest at 18.5% per year and were secured by all the assets of the Company. Paid in full during 2015. $ — $ 37,038 A total of $1,228 and $32,209 in accrued interest was paid during the years ending December 31, 2015 and 2014 respectively, to officers and stockholders related to various notes described above. F-15 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 8 — Accrued Expenses Accrued expenses consisted of the following: Accrued Wages and Related Costs Accrued Compensation Accrued Professional Services Accrued Warranty Obligations Accrued Interest Other Accrued Expenses Total $ December 31, 2015 December 31, 2014 102,792 $ 358,719 89,000 64,002 109,984 10,000 101,445 428,786 45,000 39,624 75,471 8,741 $ 734,497 $ 699,067 Included in the above accrued compensation amounts owed to officers of the Company for services rendered that remain outstanding. These amounts are not subject to a fixed repayment schedule and they bear interest at a rate of 8% per annum, compounding monthly. The amounts were $327,469 as of December 31, 2015 and $393,536 as of December 31, 2014. The related interest amounts included in Accrued Interest was $97,801 and $62,081 respectively at December 31, 2015 and December 31, 2014. The Company has warranty obligations in connection with the sale of certain of its products. The warranty period for its products is generally one year except in European countries where it is two years. The costs incurred to provide for these warranty obligations are estimated and recorded as an accrued liability at the time of sale. The Company estimates its future warranty costs based on product-based historical performance rates and related costs to repair. The changes in the Company’s accrued warranty obligations for the years ended December 31, 2015 and 2014 were as follows: Accrued Warranty Obligations at December 31, 2013 Reductions for Settling Warranties Warranty Issued During Year Accrued Warranty Obligations at December 31, 2014 Reductions for Settling Warranties Warranty Issued During Year Accrued Warranty Obligations at December 31, 2015 Note 9 – Derivative Liability and Fair Value Measurements $ $ 31,619 (96,460) 104,465 39,624 (67,858) 92,236 64,002 The Company recognized a derivative liability for the warrants to purchase shares of its common stock issued in connection with the equity offering and related debt conversions on August 5, 2013. These warrants have a cashless exercise provision and an exercise price that is subject to adjustment in the event of subsequent equity sales at a lower purchase price (subject to certain exceptions) along with full-ratchet anti-dilution provisions. In accordance with ASC 815-10-25, we measured the derivative liability using a Monte Carlo Options Lattice pricing model at their issuance date and subsequently remeasured the liability on each reporting date. Accordingly, at the end of each quarterly reporting date the derivative fair market value is remeasured and adjusted to current market value. As at December 31, 2015 and 2014 a total of 45,100 and 4,730,992 warrants were outstanding that contained a full-ratchet anti-dilution provision. In connection with the Series A Private Placement on January 2, 2015 (see Note 13), holders of approximately 86% of outstanding warrants issued by the Company in its public offering and in connection with the conversion by certain holders of the Company’s outstanding debt in connection with the Company’s public offering (collectively, the “Public Offering Warrants”) agreed to irrevocably waive their rights to anti-dilution protection under Section 2(b) of the Public Offering Warrants in the event the Company issues additional securities at a per share price lower than the exercise price of the Public Offering Warrants (the “Public Offering Warrant Waiver”). As a result the related derivative liability was reversed to Nil and reclassified into stockholders equity under Additional Paid-In Capital. The Company recognized a derivative liability during the year ended December 31, 2014 for the $3,000,000 of senior convertible notes with a conversion price that is subject to adjustment in the event of subsequent equity sales at a lower purchase price (subject to certain exceptions). In accordance with ASC 815-10-25, we measured the derivative liability of this embedded conversion option using a Monte Carlo Options Lattice pricing model at the June 3, 2014 issuance date as $1,938,988. The value of the derivative liability at issuance was recorded as a discount against the notes in the Long-Term Debt section of the balance sheet. Accordingly, at the end of each quarterly reporting date the derivative fair market value is remeasured and adjusted to current market value. In connection with the Series A Private Placement on January 2, 2015, each of the holders of notes issued by the Company on June 3, 2014 (the “June 2014 Notes”) agreed to irrevocably waive their rights to anti-dilution protection under Section 5(b) of the June 2014 Notes in the event the Company issues additional securities at a per share price lower than the conversion price of the June 2014 Notes (the “June 2014 Note Waiver”). As a result this derivative liability was reversed to Nil and reclassified into stockholders equity under Additional Paid-In Capital. F-16 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) We measure certain financial instruments at fair value on a recurring basis. Assets and liabilities measured at fair value on a recurring basis are as follows at December 31, 2015: Warrant Liability Total liabilities measured at fair value (Long-Term) $ $ 240,786 $ 240,786 $ — $ — $ — $ — $ 240,786 240,786 Total Level 1 Level 2 Level 3 We measure certain financial instruments at fair value on a recurring basis. Assets and liabilities measured at fair value on a recurring basis are as follows at December 31, 2014: Total Level 1 Level 2 Level 3 Note Conversion Feature Liability Warrant Liability Total liabilities measured at fair value (Long-Term) $ $ 2,806,942 $ 10,734,196 13,541,138 $ — $ — — $ Fair value – December 31, 2013 Reclassification of warrant exercises to Additional Paid-in Capital Change in fair value for the period of warrant derivative liability Convertible debt issued with an embedded conversion price adjustment provision Extinguishment of liability upon conversion of debt Change in fair value of debt conversion price adjustment for the period Fair value – December 31, 2014 Reclassification of warrant exercises to Additional Paid-in Capital Change in fair value for the period of warrant derivative liability Reclassification of embedded debt conversion price adjustment provision liability to Additional Paid-in Capital upon waiver of certain anti-dilutive provisions Reclassification of warrant exercise price adjustment provision liability to Additional Paid-in Capital upon waiver of certain anti-dilutive provisions — $ — — $ 2,806,942 10,734,196 13,541,138 $ 12,035,815 (2,127,405) 825,786 1,938,988 (500,261) 1,368,215 13,541,138 (2,855,463) 1,098,465 (2,806,942) (8,736,412) Fair value – December 31, 2015 $ 240,786 For the period ending December 31, 2015, since the embedded conversion option as described above was permanently waived on January 2, 2015, the value reduced to zero. For the period ending December 31, 2014, the Monte Carlo Options Lattice pricing model was used to estimate the fair value of the embedded conversion option on the convertible notes issued during this period. The following summary table shows the assumptions used to compute the fair value of the embedded conversion option when granted at issuance and as of December 31, 2014: Assumptions for Pricing Model: Expected term in years Volatility range for years 1 to 5 Expected annual dividends Value of convertible debt price adjustment: Fair value of debt embedded conversion price adjustment option December 31, 2014 At Issuance – June 3, 2014 2.67 81% None 3.00 57% None $ 2,806,942 $ 1,938,988 The Monte Carlo Options Lattice pricing model was used to estimate the fair value of warrants outstanding: Assumptions for Pricing Model: Expected term in years Volatility range for years Risk-free interest rate Expected annual dividends December 31, 2015 December 31, 2014 2.60 103% 3.21 to 3.78 81 to 89% 1.06% 0.83 to 1.11% None None Value of warrants outstanding: Fair value of warrants $ 240,786 $ 10,734,196 F-17 VUZIX CORPORATION AND SUBSIDIARY NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 10 — Long-Term Debt Long-term debt consisted of the following: Note payable for research and development equipment. The principal is subject to a fixed semi- annual repayment schedule commencing October 31, 2013 over 48 months. The note carries a 0% interest rate. $ The note carries a 0% interest, but imputed interest has been accrued based on a 12% discount rate and is reflected as a reduction in the principal. Note payable for which the principal and interest is subject to a fixed blended repayment schedule of 36 months, commencing July 15, 2013. The loan bears interest at 12% per year and is secured by a subordinated position in all the assets of the Company. Convertible, Senior Secured Notes payable. The principal is due June 3, 2017 and no principal payments are required prior to maturity. The notes carry a 5% interest, payable upon the note’s maturity. Both the interest plus accrued interest is convertible into shares of the Company’s common shares at $2.25, subject to normal adjustments. The notes are secured by a first security position in all the assets of the Company. Most of the notes are held by existing stockholders of the Company. Convertible, Senior Secured Notes issued on June 3, 2014 Debt Issuance Costs of $139,340, net of accumulated amortization. The estimated aggregate annual amortization expense for each of the next fiscal years until maturity is approximately $46,000 and approximately $20,000 in the following fiscal year. Unamortized debt discount related to derivative liability associated with above notes’ conversion price that is subject to adjustment in the event of subsequent equity sales at a lower purchase price (subject to certain exceptions). Upon issuance on June 3, 2014 the discount was $1,938,988 which is being amortized as interest expense over the life of the loan or sooner if the related debt is converted. Less: Amount Due Within One Year Amount Due After One Year December 31, 2015 December 31, 2014 59,917 $ 186,131 (21,085) (46,399) 16,958 50,874 1,915,155 2,375,000 (66,074) (112,521) (621,531) (1,348,185) $ 1,283,340 $ (55,790) 1,104,900 (128,425) $ 1,227,550 $ 976,475 The calendar year aggregate maturities for all long-term borrowings exclusive of discounts as of December 31, 2015 are as follows: Total Aggregate Maturity For Period 2016 2017 Total Required Principal Payments Exclusive of Debt Discounts Total Unamortized Debt Discounts and Deferred Costs Total Net Long-Term Borrowings as of December 31, 2015 F-18 Amounts $ 76,875 1,915,155 1,992,030 (708,690) $ 1,283,340 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) On June 3, 2014, we entered into and closed a securities purchase agreement (the “June 2014 Purchase Agreement”) with various accredited investors (the “June 2014 Investors”) pursuant to which we issued and sold to the June 2014 Investors a total of $3,000,000 principal amount of 5% Senior Secured Convertible Notes (the “June 2014 Notes”). The Company granted the June 2014 Investors a first priority security interest in all of the present and future assets of the Company and its subsidiaries, including the equity interests of its subsidiaries. There are no scheduled payments on the June 2014 Notes, which are due on June 3, 2017, prior to maturity. Interest on the June 2014 Notes accrues at the rate of 5% per year, compounded annually, and is payable at maturity in cash, or (provided certain conditions are met) in shares of common stock valued at the then effective conversion price. The June 2014 Notes are convertible into common stock at an initial conversion price of $2.25 per share, subject to adjustment in the event of stock splits, stock dividends, and similar transactions, and, and under their initial terms, in the event of subsequent sales of common stock or securities convertible or exercisable for common stock, at a price per share lower than the then effective conversion price, subject to certain exceptions. The Company is not permitted to prepay any portion of the principal amount of the June 2014 Notes without the prior written consent of the June 2014 Investors unless certain conditions are met. Pursuant to a registration rights agreement, dated June 3, 2014, between the Company and the June 2014 Investors, the Company agreed to file a registration statement, relating to the resale of common stock issuable upon conversion of the June 2014 Notes and payable as interest on the June 2014 Notes. The Company filed such registration statement on July 2, 2014, and the registration statement was declared effective by the Securities and Exchange Commission on July 10, 2014. Of these June 2014 Notes, $459,845 were converted into 204,376 shares of common stock during the year ended December 31, 2015. And $625,000 of these June 2014 Notes were converted into 277,000 shares of common stock during the year ended December 31, 2014. $12,655 of accrued interest on these Notes were converted into 5,624 shares of common stock during the year ended December 31, 2015. No interest was converted during the year ended December 31, 2014. F-19 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 11 — Capital Lease Obligations The Company maintains equipment held under capital lease obligations due in monthly installments of $2,049 with an implied interest rate of 26.71%. The related equipment is collateral to the leases. Final payments under the Company’s capital lease obligations were made in September 2015 and there are no further capital lease obligations. Total Principal Payments Less: Amount Due Within One Year Amount Due After One Year The following is a summary of assets held under capital leases: December 31, Computers and Software Furniture and Equipment Less: Accumulated Depreciation Net December 31, 2015 December 31, 2014 $ $ $ $ — $ — — $ 16,882 (16,882) — 2015 2014 — $ — — — — $ 16,200 35,083 51,283 (42,230) 9,053 Depreciation expense related to the assets under capital lease amounted to $9,053 and $12,417 for years ended December 31, 2015 and 2014, respectively. F-20 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 12 — Income Taxes The Company files U.S. federal and various state and foreign tax returns. Pre-tax earnings consisted of the following for the years ended December 31, 2015 and 2014: December 31, Pre-Tax (Loss) Earnings U.S. Outside the U.S. Total Pre-Tax (Loss) Earnings 2015 2014 $ $ (13,425,887) $ (1,591) (13,427,478) $ (7,868,858) — (7,868,858) The provision (benefit) for income taxes for the years ended December 31, 2015 and 2014 was as follows: U.S. Income Taxes Current Provision Deferred Provision Income Taxes Outside the U.S. Current Provision Deferred Provision State Income Taxes Current Provision Deferred Provision Total Provision 2015 2014 $ $ — $ — — — — — — $ — — — — — — — A reconciliation of the statutory U.S. federal income tax rate to the effective rates for the years ended December 31, 2015 and 2014 is as follows: Federal Income Tax at Statutory Rate State Tax Provision, Net of Federal Benefit Foreign Income Taxed at Other Than 34% Loss on Derivative Valuation Change in Rate Assumptions Other Effective Tax Rate Change in Valuations Allowance Net Effective Tax Rate F-21 2015 2014 34.0% 0.3% (0.0)% (6.3)% 0.0% 0.7% 28.7% (28.7)% 0.0% 34.0% 0.2% (0.0)% (11.1)% 0.0% (2.2)% 20.9% (20.9)% 0.0% VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Deferred tax assets (liabilities) for the years ended December 31, 2015 and 2014 consist of the following: Deferred Tax Assets Net Operating Loss Carry-forwards Tax Credit Carry-forwards Other Total Deferred Tax Assets Deferred Tax Liabilities Other Net Deferred Tax Assets Before Valuation Allowance Valuation Allowance Net Deferred Tax Assets 2015 2014 15,027,603 $ 1,823,661 393,218 17,244,482 11,418,496 1,433,229 876,606 13,728,331 271,565 614,027 16,972,917 $ (16,972,917) 13,114,304 (13,114,304) — $ — $ $ $ As of December 31, 2015, the Company has approximately $43.9 million in net operating loss carry-forwards and approximately $1.8 million of federal and state credit carry-forwards which will begin to expire in 2018 if not utilized. As the result of the assessment of the FASB ASC 740-10 (Prior Authoritative Literature: FASB Interpretation No. 48 (“FIN 48”), Accounting for Uncertainty in Income Taxes — An Interpretation of FASB Statement No. 109), the Company has no unrecognized tax benefits. By statute, tax years 2012-2015 are open to examination by the major taxing jurisdictions to which the Company is subject. FASB ASC 740, requires recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are determined based on differing treatment of items for financial reporting and income tax reporting purposes. The deferred tax balances are adjusted to reflect tax rates by tax jurisdiction, based on currently enacted tax laws, which will be in effect in the years in which the temporary differences are expected to reverse. In light of the historic losses of the Company, a 100% valuation allowance has been recorded to fully offset any benefit associated with the net deferred tax assets, which the company believes more-likely-than-not will not be recognized. Note 13 — Capital Stock Preferred stock Shares of undesignated preferred stock may be issued in one or more series. The Board of Directors is authorized to establish and designate the different series and to fix and determine the voting powers and other special rights and qualifications. A total of 5,000,000 shares of preferred authorized are authorized as of December 31, 2015 and December 31, 2014. There were 49,626 shares issued or outstanding on December 31, 2015 and 0 shares outstanding on December 31, 2014. There were no declared preferred dividends owed as of December 31, 2015 or 2014. On January 2, 2015 (the “Series A Closing Date”), we entered into and closed a Series A Preferred Stock Purchase Agreement (the “Series A Purchase Agreement”) with Intel Corporation (the “Series A Purchaser”), pursuant to which we issued and sold to the Series A Purchaser, an aggregate of 49,626 shares of the Company’s Series A Preferred Stock, at a purchase price of $500 per share, for an aggregate purchase price of $24,813,000 (the “Series A Private Placement”). Each share of Series A Preferred Stock is convertible, at the option of the Series A Purchaser, into 100 shares of the Company’s common stock (determined by dividing the Series A Original Issue Price of $500 by the Series A Conversion Price. The Series A Conversion Price is $5.00, subject to adjustment in the event of stock splits, dividends or other combinations). Total costs incurred connection with this offering were $214,169. F-22 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Each share of Series A Preferred Stock is entitled to receive dividends at a rate of 6% per year, compounded quarterly and payable in cash or in kind, at the Company’s sole discretion. As of December 31, 2015, total accrued and unpaid preferred dividends were $1,514,081. In the event of the liquidation, dissolution or winding up of the Company, each share of Series A Preferred Stock is entitled to a liquidation preference equal to one times (1x) the Series A Purchaser’s original per share purchase price, plus a right to receive an additional liquidation distribution together with the common stock holders pro rata on an as converted basis, but not in excess of $1,000 per share in the aggregate (subject to adjustment for accrued but unpaid dividends and in the event of stock splits, dividends or other combinations). Each share of Series A Preferred Stock is entitled to vote with the holders of the Company’s common stock on matters presented to its stockholders, and is entitled to cast such number of votes equal to the whole number of shares of common stock into which such shares of Series A Preferred Stock are convertible. The holders of record of the Series A Preferred Stock are entitled to nominate and elect 2 directors to the Company’s Board of Directors (the “Board Election Right”), at least one of whom isrequired to qualify as an “independent” director, as that term is used in applicable exchange listing rules. The Board Election Right with respect to the independent director will terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 40% of the original amount purchased by the Series A Purchaser. The Board Election Right with respect to the second director shall terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 20% of the original amount purchased by the Series A Purchaser. The Company also granted the Series A Purchaser the right to have a board observer at meetings of the Company’s Board of Directors and committees thereof. For as long as at least 25% (or 12,406 shares) of the Series A Preferred Stock is outstanding, the Company may not, without the consent of holders of at least 60% of the then outstanding shares of Series A Preferred Stock, take certain actions, including but not limited to: (i) liquidate, dissolve, or wind up the business and affairs of the Company; (ii) amend, alter or repeal any provision of its charter or bylaws in a manner that adversely effects the rights of the Series A Preferred Stock; (iii) create or issue any capital stock that is equal to or senior to the Series A Preferred Stock with respect to preferences; (iv) create or issue any debt security, subject to certain exceptions; (v) pay off any debt obligation prior to its stated maturity date; or (vi) enter into any stockholders rights plan or similar arrangement or take other actions that may limit actions that holders of a majority of the Series A Preferred Stock can take under Section 203 (“Section 203”) of the Delaware General Corporation Law, as well as such other customary provisions protecting the rights of the holder of the Series A Preferred Stock, as are outlined in the Certificate of Designation. The Series A Purchaser has the right to participate in any proposed issuance by the Company of its securities, subject to certain exceptions (the “Participation Right”). In the event the Series A Purchaser is not afforded the opportunity to exercise its Participation Right, the Series A Purchaser will have the right, but not the obligation, up to two times per calendar year, to acquire additional securities from the Company in such amount as is sufficient to maintain the Series A Purchaser’s ownership percentage in the Company, calculated immediately prior to such applicable financing, at a purchase price equal to the per share price of the Company’s securities in such applicable financing. In connection with the Series A Private Placement, the Company entered into an investor’s rights agreement with the Series A Purchaser, pursuant to which the Company agreed to file a “resale” registration statement with the Securities and Exchange Commission (the “SEC”) covering all shares of common stock issuable upon conversion of the Series A Preferred Stock sold in the Series A Private Placement on or before February 14, 2015. The Company filed the registration statement on February 12, 2015 and the registration statement was declared effective by the SEC on February 17, 2015. Common Stock The Company’s authorized common stock consists of 100,000,000 shares, par value of $0.001 as of December 31, 2015 and 2014. There were 16,087,951 and 11,295,387 shares of common stock issued and outstanding as of December 31, 2015 and December 31, 2014, respectively. F-23 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 14 — Stock Warrants The following table shows the various changes in warrants for the years December 31, 2015 and 2014. Warrants Outstanding, Beginning of Year Exercised During the Year Issued During the Year Forfeited During the Year Warrants Outstanding, End of Year December 31, 2015 December 31, 2014 5,236,660 (4,746,755) 60,000 (14,814) 7,147,775 (1,285,746) — (625,369) 535,091 5,236,660 The outstanding warrants as of December 31, 2015 expire from November 3, 2017 to August 5, 2018. The weighted average remaining term of the warrants is 2.3 years. The weighted average exercise price is $2.43 per share. During the year ending December 31, 2015 a total of 4,178,267 warrants were exercised on a cashless basis resulting in the issuance of 3,559,783 shares. During the year ending December 31, 2015 a total of 568,488 warrants were exercised on a cash basis resulting in proceeds of $1,272,627. The Black-Scholes-Merton pricing model was used to estimate the fair value of share-based awards under FASB ASC Topic 718. The Black-Scholes-Merton pricing model incorporates various highly subjective assumptions, including expected term and expected volatility. The following summary table shows the assumptions used to compute the fair value of the 60,000 warrants granted during the year ending December 30, 2015 for investor relations services and their estimated value: · · · · · Expected term in years Volatility Risk-free interest rate Expected annual dividends Fair value of warrants issued 2.8 to 3.0 years 122.8 to 122.9% 0.90 to 0.99% None $260,373 The entire fair value amount of the warrants issued was recognized during the year ended December 31, 2015. Note 15 — Stock Option Plans The Company has the following Stock Option Plans (“Plans”) that allow for the granting of both statutory and incentive stock options or ISOs, which can result in potentially favorable tax treatment to the participant, and non-statutory stock options. The Company’s 2014 Equity Incentive Plan (the “2014 Plan”) was approved by the stockholders of the Company on June 26, 2014. The Company will no longer issue any options under the 2007 and 2009 Plans. The 2014 Plan has an “evergreen provision”, under which the maximum number of shares of common stock that may be issued under the 2014 Plan was initially 1,000,000 and automatically increase each time the Company issues additional shares of common stock so that the total number of shares issuable thereunder at all times equals 10% of the then outstanding shares of common stock, unless in any case the Board of Directors adopts a resolution providing that the number of shares issuable under the 2014 Plan not be so increased. As at December 31, 2015, the authorized shares of common stock under the 2014 Plan totaled 1,608,795. The exercise price per share subject to an option is determined by the administrator, but in the case of an ISO must not be less than the fair market value of a share of our common stock on the date of grant and in the case of a non-statutory stock option must not be less than 100% of the fair market value of a share of our common stock on the date of grant. Under the 2014 Plan, the Company may grant stock options, stock appreciation rights, performance awards of stock and/or cash, and stock awards of restricted stock. Outstanding as of December 31, 2015 Available for future issuance under plan Totals authorized by plan 2007 Plan 2009 Plan 2014 Plan 37,447 — 37,447 120,842 — 120,842 864,500 744,295 1,608,795 Total 1,022,789 744,295 1,767,084 The 2014 Plan gives the Board of Directors of the Company the ability to determine vesting periods for all stock incentives granted under the 2014 Plan, and allows option terms to be up to ten years from the original grant date. Employees’ incentive stock options must vest at a minimum rate of 20% per year over a five year period, commencing on the date of grant. Most vest ratably over four years commencing on the date of the option grant. In the case of directors, such options are granted annually and expire ten years after the date of their grant and vest ratably, on a monthly basis, over the next 12 months. Non-employee directors have vesting of 50% immediately on grant and the balance vest ratably, on a monthly basis, over the next 12 months. Advisors or consultants can have vesting range from 100 percent of the option grants vesting immediately to ratably, on a monthly basis, up to 48 months. F-24 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) The following table summarizes stock option activity for the years ended December 31, 2015 and 2014: Outstanding at December 31, 2013 Granted Exercised Expired or Forfeited Outstanding at December 31, 2014 Granted Exercised Expired or Forfeited Outstanding at December 31, 2015 Number of Shares Weighted Average Exercise Price Weighted Average Remaining Life (years) 214,518 $ 548,000 (10,819) (31,148) 720,551 $ 374,000 (15,833) (55,929) 1,022,789 $ 9.72 2.63 1.71 2.71 4.46 5.67 2.60 8.12 4.59 6.11 8.56 7.56 As of December 31, 2015, there were 424,688 options that were fully vested and exercisable at weighted average exercise price of $5.34 per share. The weighted average remaining contractual term on the vested options is 7.4 years. The unvested balance of 598,101 options as of December 31, 2015, are exercisable at a weighted average exercise price of $4.05 per share. The weighted average remaining contractual term on the vested options is 7.4 years. The aggregate intrinsic value of the options outstanding as of December 31, 2015 was approximately $3,449,805. F-25 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) The Black-Scholes-Merton option pricing model was used to estimate the fair value of share-based awards under FASB ASC Topic 718. The Black-Scholes-Merton option pricing model incorporates various and highly subjective assumptions, including expected term and expected volatility. For valuation purposes, stock option awards were categorized into two groups, stock option grants to employees and stock option grants to members of the Board of Directors. The expected term of options granted was estimated to be the average of the vesting term, historical exercise and forfeiture rates, and the contractual life of the option. The expected volatility at the grant date is estimated using historical stock prices based upon the expected term of the options granted. The risk-free interest rate assumption is determined using the rates for U.S. Treasury zero-coupon bonds with maturities similar to those of the expected term of the award being valued. Cash dividends have never been paid and are not anticipated to be paid in the foreseeable future. Therefore, the assumed expected dividend yield is zero. The following summary table shows the assumptions used to compute the fair value of stock options granted during 2015 and 2014 and their estimated value: December 31, Assumptions for Black-Scholes: Expected term in years Volatility Risk-free interest rate Expected annual dividends Value of options granted: Number of options granted Weighted average fair value/share Fair value of options granted 2015 2014 6.0 to 7.9 5.6 to 10.0 111.4 to 113.5% 118.6 to 119.7% 1.70 to 2.42% 1.74% to 2.02% None None $ $ 374,000 4.50 $ 1,684,179 $ 548,000 2.63 1,241,994 FASB ASC Topic 718 requires pre-vesting option forfeitures at the time of grant to be estimated and periodically revised in subsequent periods if actual forfeitures differ from those estimates. Stock-based compensation expense is recorded only for those awards expected to vest using an estimated forfeiture rate based on historical pre-vesting forfeiture data. Unrecognized stock-based compensation expense was approximately $2,186,000 as of December 31, 2015, relating to a total of 598,101 unvested stock options under the Company’s stock option plans. This stock-based compensation expense is expected to be recognized over a weighted average period of approximately 2.2 years. Unrecognized stock-based compensation expense was approximately $1,100,000 as of December 31, 2014, relating to a total of 462,765 unvested stock options under the Company’s stock option plans. F-26 VUZIX CORPORATION AND SUBSIDIARIES NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) Note 16 — Commitments The Company has signed several lease agreements, with the largest being for its new office and manufacturing space under an operating lease that commenced October 3, 2015, that expires on October 3, 2020. The base rent contractual payment obligations under this operating lease will be $335,248 per year. The lease has an original five year term with an option by the Company to renew for two additional three year terms at pre-agreed to lease rates. The Company also leases small office spaces in England under a two year lease and under a one year lease arrangements in Japan. Future minimum payments required under operating lease obligations as of December 31, 2015 are as follows: Year Ending Dec 31, 2016 2017 2018 2019 2020 Total $ $ Total Minimum Lease Payments 416,052 348,089 335,248 335,248 251,436 1,686,073 For the lease agreements described above, the Company is required to pay the pro rata share of the real property taxes and assessments, expenses and other charges associated with these facilities. Rent expense for the years ended December 31, 2015 and 2014 totaled $186,471 and $116,743, respectively. The Company pursuant to its new office and manufacturing space has made commitments that total approximately $250,000 for its new clean room and other areas. These amounts are expected to be incurred during the first quarter of 2016. Note 17 — Employee Benefit Plans The Company has a Section 401(k) Savings Plan which covers employees who meet certain age and length of service requirements. To date the plan is comprised of 100% employee deferrals. Note 18 — Litigation We are not currently involved in any pending legal proceeding or litigation. Note 19 — Concentrations For 2015 and 2014, sales to the U.S. government accounted for approximately 4% and 10% of the Company’s sales, respectively. One United States based customer represented 18% of revenues in 2015 and 0% in 2014. Accounts receivable from the U.S. government accounted for 0%, and 6% of accounts receivable at December 31, 2015 and 2014, respectively. Note 20 — Related Party Transactions Included in the above accrued compensation amounts owed to officers of the Company for services rendered that remain outstanding. These amounts are not subject to a fixed repayment schedule and they bear interest at a rate of 8% per annum, compounding monthly. The amounts were $327,469 as of December 31, 2015 and $393,536 as of December 31, 2014. The related interest amounts included in Accrued Interest were was $97,801 and $62,081 respectively at December 31, 2015 and December 31, 2014. Interest expense related to the outstanding current accrued compensation in Accrued Expenses (Note 8) to officers was $35,722 and $33,907 for the years ended December 31, 2015 and 2014, respectively. During the year ended December 31, 2015, $481,920 or 18% of total revenues, were derived from a major stockholder (24% on as- converted to common stock basis with respect to shares of Series A Preferred Stock held by such stockholder) of the Company who also represented $290,750 of the accounts receivable balance at December 31, 2015. All such amounts were nil in the prior year’s period. F-27 Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on the 30 day of March, 2016. SIGNATURES VUZIX CORPORATION /s/ Paul J. Travers Paul J. Travers Chief Executive Officer POWER OF ATTORNEY KNOW BY ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints jointly and severally, Paul J. Travers and Grant Russell, and each one of them, his or her attorneys-in-fact, each with the power of substitution, for him or her in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof. Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated: Signature /s/ Paul J. Travers Paul J. Travers /s/ Grant Russell Grant Russell /s/ Michael Scott Michael Scott /s/ Alexander Ruckdaeschel Alexander Ruckdaeschel Title President, Chief Executive Officer and Director (Principal Executive Officer) Chief Financial Officer, Executive Vice- President and Director (Principal Financial and Accounting Officer) Director Director 50 Date March 30, 2016 March 30, 2016 March 30, 2016 March 30, 2016 Exhibit Index 2.1 (12) 3.1(2) 3.2(2) 3.3(14) 3.4 (25) 3.5 (28) 4.1(2) 4.2(3) 4.3(4) 4.4 (19) 10.1(1) 10.2(1) 10.3(2) 10.4(1) 10.5(1) 10.6(1) 10.7(2)† 10.8(3) 10.9(3) 10.10(4) Asset Purchase Agreement, dated as June 15, 2012, by and between the registrant and TDG Acquisition Company LLC Amended and Restated Certificate of Incorporation Amended and Restated Bylaws Amendment to Amended and Restated Certificate of Incorporation Amendment to Amended and Restated Certificate of Incorporation Certificate of Designation of Series A Preferred Stock Specimen certificate evidencing shares of common stock Common Stock Purchase Warrant dated as of May 21, 2010 issued by the registrant to Kopin Corporation Common Stock Purchase Warrant dated as of October 21, 2010 issued by the registrant to Kopin Corporation Form of Warrant 2007 Amended and Restated Stock Option Plan 2009 Stock Option Plan Form of Option Agreement under 2009 Stock Plan Form of Indemnification Agreement by and between the registrant and each director and executive officer Employment Agreement dated as of August 1, 2007 by and between the registrant and Paul J. Travers Employment Agreement dated as of August 1, 2007 by and between the registrant and Grant Russell Technology Purchase and Royalty Agreement dated as of December 23, 2005 between the registrant and New Light Industries, Ltd. Revolving Line of Trade Credit Agreement dated as of May 21, 2010 by and between the registrant and Kopin Corporation Security Agreement dated as of May 21, 2010 by and between the Company and Kopin Corporation Amendment to Revolving Line of Trade Credit Agreement dated as of October 8, 2010 by and between the registrant and Kopin Corporation 10.11(5) Convertible Loan and Security Agreement, dated as of December 23, 2010 by and between the registrant and LC Capital Master Fund Ltd. 10.12(5) Intellectual Property Security Agreement dated as of December 23, 2010 by and between the registrant and LC Capital Master Fund Ltd. 10.13(5) 10.14(5) 10.15(6) 10.16(6) 10.17(6) 10.18(6) 10.19(6) Warrant to Purchase Stock dated December 23, 2010 issued by the Vuzix Corporation to LC Capital Master Fund Ltd. Convertible Promissory Note issued by the registrant to LC Capital Master Fund Ltd. Letter Agreement dated as of December 23, 2010 by and between the registrant and Kopin Corporation Letter Agreement dated as of December 23, 2010 by and between the registrant and Vast Technologies Inc. Letter Agreement dated as of December 23, 2010 by and between the registrant and Paul J. Travers Letter Agreement dated as of December 23, 2010 by and between the registrant and John Burtis Warrant issued by the registrant to Vast Technologies Inc. entitling Vast to purchase up to 1,662,274 shares of Common Stock at an exercise price of $.09965 per share 10.20 (20) 10.21(6) 10.22(6) 10.23(15) Warrant issued by the registrant to Kopin Corporation Warrant issued by the registrant to Paul J. Travers Warrant issued by the registrant to John Burtis Loan and Security Agreement dated as of March 21, 2011 by and between the registrant and Bridge Bank National Association 10.24(15) Intellectual Property Security Agreement dated as of March 21, 2011 by and between the registrant and Bridge Bank National Association 10.25(15) Intercreditor Agreement dated as of March 21, 2011 by and between the registrant and Bridge Bank National Association 51 10.26(15) Subordination Agreement dated as of March 21, 2011 by and between Kopin Corporation and Bridge Bank National Association 10.27(15) Subordination Agreement dated as of March 21, 2011 by and between Vast Corporation and Bridge Bank National Association 10.28(15) Subordination Agreement dated as of March 21, 2011 by and between Paul J. Travers and John Burtis, on the one hand, and Bridge Bank National Association on the other hand 10.29(7) 10.30(8) Supplemental Agreement, dated as of December 8, 2011, by and between the registrant and LC Capital Master Fund Ltd. Second Supplement Agreement, dated as of January 23, 2012, by and between the registrant and LC Capital Master Fund Ltd. 10.31(9) Third Supplemental Agreement, dated as of February 23, 2012 by and between the registrant and LC Capital Master Fund Ltd. 10.32(10) Fourth Supplemental Agreement, dated as of March 23, 2012, by and between the registrant and LC Capital Master Fund Ltd. 10.33 (11) Promissory Note and Security Agreement, dated as of May 19, 2012, by and between the registrant and LC Capital Master Fund Ltd. 10.34 (12) Shared Services Agreement, dated as of June 15, 2012, by and between Vuzix Corporation and TDG Acquisition Company LLC 10.35 (12) 10.36 (12) Reseller Agreement, dated as June 15, 2012, by and between Vuzix Corporation and TDG Acquisition Company LLC. Restrictive Covenants Agreement, dated as June 15, 2012, by and between Paul Travers and TDG Acquisition Company LLC 10.37 (12) Kopin Loan Modification Agreement dated as June 15, 2012, by and among the Company, Kopin Corporation, TDG Acquisition Company LLC and Chu, Ring & Hazel, LLP 10.38 (12) LC Master Fund Loan Modification Agreement, dated as June 15, 2012, by and between the Company and LC Master Fund, LLC 10.39 (13) Amended and Restated Convertible Loan and Security Agreement, dated as of June 15, 2012, by and between the Company and LC Capital Master Fund Ltd. 10.40 (13) Convertible Promissory Note, dated as of June 15, 2012, in the principal amount of $619,122 issued by the Company in favor of LC Capital Master Fund Ltd. 10.41 (16) Securities Purchase Agreement, dated as of March 21, 2013, by and between the registrant and Hillair Capital Investments L.P. 10.42 (16) 10.43 (16) 16% Senior Secured Convertible Debenture, dated as of March 27, 2013, issued to Hillair Capital Investments L.P. Security Agreement, dated as of March 27, 2013, by and between the registrant, subsidiaries of the registrant and Hillair Capital Investments L.P. 10.44 (16) Subsidiary Guarantee, dated as of March 21, 2013, by and between the guarantors named therein in favor of Hillair Capital Investments L.P. 10.45 (16) 10.46 (16) Common Stock Purchase Warrant, dated as of March 27, 2013, issued to Hillair Capital Investments L.P. Pledge and Security Agreement, dated as of March 27, 2013, by and between the registrant, Travers Family LLC, Paul Travers, and Hillair Capital Investments L.P. 10.47 (16) 10.48 (17) 10.49 (17) 10.50 (17) 10.51 (17) 10.52 (17) 10.53 (17) 10.54 (17) 10.55 (17) 10.56 (17) 10.57 (21) Form of Subordination Agreement Debt Conversion Agreement by and between the registrant and Paul Travers Debt Conversion Agreement by and between the registrant and Vast Technologies Debt Conversion Agreement by and between the registrant and Kopin Corporation Conversion/Exchange Agreement by and between the registrant and LC Capital Master Fund Ltd Deferred Compensation and Conversion Option Agreement by and between the registrant and Paul Travers Deferred Compensation and Conversion Option Agreement by and between the registrant and Grant Russell Amendment to Debt Conversion Agreement by and between the registrant and Vast Technologies, Inc. Amendment to Debt Conversion Agreement by and between the registrant and Kopin Corporation Amendment to Debt Conversion Agreement by and between the registrant and Paul Travers Amendment No. 2 to Debt Conversion Agreement by and between the registrant and Paul Travers 52 10.58 (21) 10.59 (21) 10.60 (21) 10.61 (21) 10.62 (21) 10.63 (18) 10.64 (18) 10.65 (18) 10.66 (19) 10.67 (22) 10.68 (19) 10.69 (19) Amendment No.2 to Debt Conversion Agreement by and between the registrant and Vast Technologies Amendment No.2 to Debt Conversion Agreement by and between the registrant and Kopin Corporation Amendment to Conversion/Exchange Agreement by and between the registrant and LC Capital Master Fund Ltd Amendment to Deferred Compensation and Conversion Option Agreement by and between the registrant and Paul Travers Amendment to Deferred Compensation and Conversion Option Agreement by and between the registrant and Grant Russell Securities Purchase Agreement, dated July 15, 2013 16% Senior Secured Convertible Debenture due March 21, 2018 Common Stock Warrant, dated July 15, 2013 Amendment No. 3 to Debt Conversion Agreement between the registrant and Vast Technologies, Inc. Amendment No. 3 to Debt Conversion Agreement between the registrant and Kopin Corporation Amendment No. 3 to Debt Conversion Agreement between the registrant and Paul Travers Amendment No. 2 to Deferred Compensation and Conversion Option Agreement by and between the registrant and Paul Travers 10.70 (19) Amendment No. 2 to Deferred Compensation and Conversion Option Agreement by and between the registrant and Grant 10.71 (23) 10.72 (23) 10.73 (23) 10.74 (23) 10.75 (24) 10.76 (27) 10.77 (28) 10.78 (28) 10.79 (28) 10.80 (28) 14.1* 16.1 (26) 21.1 (20) 23.1* 31.1* 31.2* 32.1* 32.2* 101* Russell Securities Purchase Agreement, dated June 3, 2014 5% Senior Secured Convertible Note due June 3, 2017 Security Agreement dated June 3, 2014 Registration Rights Agreement dated June 3, 2014 2014 Equity Incentive Plan Letter Agreement with Chardan Capital Markets, LLC Series A Preferred Stock Purchase Agreement dated January 2, 2015 Series A Preferred Stock Investor’s Rights Agreement, dated January 2, 2015 Form of Waiver and Consent (June Notes) Form of Waiver and Consent (July 2013 Warrants) Code of Ethics EFPR letter to the SEC dated October 8, 2014 Subsidiaries Consent of Freed Maxick, CPAs, P.C. Certification of CEO as required by Rule 13a-14 or 15d-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes Oxley Act of 2002 Certification of CFO as required by Rule 13a-14 or 15d-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes Oxley Act of 2002 Section 1350 CEO Certification Section 1350 CFO Certification The following materials, formatted in XBRL (Extensible Business Reporting Language): (i) Consolidated Balance Sheets, (ii) Consolidated Statements of Income, (iii) Consolidated Statements of Cash Flows, and (iv) Notes to Consolidated Financial Statements, tagged as blocks of text † * Confidential treatment granted as to certain portions. Filed herewith. (1) Filed as an exhibit to the Registration Statement on Form S-1 filed on July 2, 2009 and incorporated herein by reference. (2) Filed as an exhibit to Amendment No. 3 to the Registration Statement on Form S-1 filed October 16, 2009 and incorporated herein by reference. (3) Filed as an exhibit to the Current Report on Form 8-K filed June 2, 2010 and incorporated herein by reference. 53 (4) Filed as an exhibit to the Current Report on Form 8-K filed October 27, 2010 and incorporated herein by reference. (5) Filed as an exhibit to the Current Report on Form 8-K filed December 30, 2010 and incorporated herein by reference. (6) Filed as an exhibit to the Current Report on Form 8-K filed December 30, 2010 and incorporated herein by reference. (7) Filed as an exhibit to the Current Report on Form 8-K filed December 19, 2011 and incorporated herein by reference. (8) Filed as an exhibit to the Current Report on Form 8-K filed January 27, 2012 and incorporated herein by reference. (9) Filed as an exhibit to the Current Report on Form 8-K filed February 29, 2012 and incorporated herein by reference. (10) Filed as an exhibit to the Current Report on Form 8-K filed March 27, 2012 and incorporated herein by reference. (11) Filed as an exhibit to the Current Report on Form 8-K filed May 24, 2012 and incorporated herein by reference. (12) Filed as an exhibit to the Current Report on Form 8-K filed June 21, 2012 and incorporated herein by reference. (13) Filed as an exhibit to the Current Report on Form 8-K filed July 3, 2012 and incorporated herein by reference. (14) Filed as an exhibit to the Current Report on Form 8-K filed February 7, 2013 and incorporated herein by reference. (15) Filed as an exhibit to the Current Report on Form 8-K filed March 25, 2011 and incorporated herein by reference. (16) Filed as an exhibit to the Current Report on Form 8-K filed March 27, 2013 and incorporated herein by reference. (17) Filed as an exhibit to the Current Report on Form 8-K filed April 2, 2013 and incorporated herein by reference. (18) Filed as an exhibit to the Current Report on Form 8-K filed July 16, 2013 and incorporated herein by reference. (19) Filed as an exhibit to the S-1/A filed July 29, 2013 and incorporated herein by reference. (20) Filed as an exhibit to the S-1 filed December 21, 2012 and incorporated herein by reference. (21) Filed as an exhibit to the S-1/A filed June 10, 2013 and incorporated herein by reference. (22) Filed as an exhibit to the S-1/A filed July 30, 2013 and incorporated herein by reference. (23) Filed as an exhibit to the Current Report on Form 8-K filed June 4, 2014 and incorporated herein by reference. (24) Filed with Definitive Proxy Statement on April 30, 2014 and incorporated herein by reference. (25) Filed as an exhibit to the Current Report on Form 8-K filed June 30, 2014 and incorporated herein by reference. (26) Filed as an exhibit to the Current Report on Form 8-K filed October 9, 2014 and incorporated herein by reference. (27) Filed as an exhibit to the Post-Effective Amendment to Form S-1 filed December 5, 2014 and incorporated herein by reference. (28) Filed as an exhibit to the Current Report on Form 8-K filed January 2, 2015 and incorporated herein by reference. 54 VUZIX CORPORATION Code of Ethics and Business Conduct for Employees, Officers and Directors Exhibit 14.1 Vuzix Corporation and its subsidiaries (collectively, the “Company”) are committed to conducting business with highest integrity and in accordance with applicable laws, rules and regulations. The policies outlined in this Code are designed to ensure that the Company’s employees, officers and directors participate in and foster a culture of transparency, integrity and honesty in the Company. Each director, officer and employee is required to review this Code and be aware of the laws that are applicable to the Company’s business. This Code provides rules and procedures to help the Company’s employees, officers and directors recognize and respond to situations that present ethical issues. The Code applies to all of our employees, officers and directors, wherever they are located and whether they work for the Company on a full or part-time basis. Employees, officers and directors are expected to read the policies set forth in this Code and understand and comply with them. Those who violate the standards in this Code will be subject to disciplinary action. 1. Compliance Standards and Procedures. Our Board of Directors will designate an Ethics Officer to be available to assist you with questions regarding this Code or report violations of the Code misconduct. The Ethics officer is responsible for applying these policies to specific situations in which questions may arise and has the authority to interpret these policies in any particular situation. Any questions relating to how these policies should be interpreted or applied should be addressed to the Ethics Officer. Any employee, officer or director who becomes aware of any existing or potential violation of laws, rules, regulations or this Code is required to notify the Ethics Officer promptly. Failure to do so is itself a violation of this Code. To encourage employees to report any violations, the Company will not allow retaliation for reports made in good faith. It is obviously not possible to anticipate every circumstance or situation which this Code would apply. Accordingly, this Code cannot, and is not intended to provide answers to every question that might arise. Nevertheless, the basic principles set forth herein can and should serve as guidance in dealings with shareholders, fellow employees, business partners, and all others with whom the Company has relationships. Ultimately the Company must rely on each person’s good sense of what is right, including a sense of when it is proper to seek guidance from others as to the appropriate course of conduct. When determining the proper course of action, you should carefully analyze the situation and seek guidance from your supervisor or other appropriate personnel in accordance with the following four steps: a. Gather all the Facts. Do not take any action that may violate the Code until you have gathered all the facts that are required to make a well-informed decision and, if necessary, you have consulted with your supervisor or the Ethics Officer. 1 b. Ask Whether the Action is Illegal or Contrary to the Code . If the action is illegal or contrary to the provision of this Code, you should not carry out the act. If you believe that the Code has been violated by an employee, an officer or a director, you must promptly report the violation in accordance with the procedures set forth herein. c. Discuss the Problem with your Supervisor. It is your supervisor’s duty to assist you to comply with this Code. Feel free to discuss the situation with your supervisor if you have any questions. You will suffer no retaliation for seeking such guidance. d. If Necessary, Seek Additional Resources. The Ethics Officer is available to speak with you about problematic situations if you do not feel comfortable approaching your direct supervisor. The Ethics Officer is also available to assist you in complying with those aspects of the Code that involve more complex issues, such as insider trading and conflicts of interest. 2. Conflicts of Interest. A conflict of interest exists when an employee, officer or director takes action or enters into relationships that oppose the interests of the Company or that interfere with his or her performance or independent judgment when carrying out his or her duties. You may not exploit your position or relationship with the Company for personal gain. Conflicts of interests are prohibited as a matter of corporate policy unless they have been approved by the Company in accordance with applicable law. Employees, officers and directors shall take every reasonable step to promptly disclose to a supervisor or the Ethics Officer any business or financial interest or relationship of any employee, officer or director that might interfere with their ability to pursue the best interests of the Company. For example, there is a likely conflict of interest if you: a. Cause the Company to engage in business transactions with relatives or friends; b. Use nonpublic Company, customer or vendor information for personal gain by you, relatives or friends (including securities transactions based on such information); c. Have more than a modest financial interest in the Company’s vendors, customers or competitors (see below for guidelines); d. Receive a loan, or guarantee of any obligation, from the Company or a third party as a result of your position at the Company; e. Receive any payments or gifts, other than gifts of nominal value, from any third party as a result of your position with the Company; or f. Compete, or prepare to compete, with the Company while still employed by the Company. Employees, officers and directors must understand the potential for conflicts of interest in investing in the Company’s vendors, customers, partners or competitors. The Company’s employees, officers and directors must always serve the Company’s stockholders first, and investing in companies with which the Company does business may not be in our stockholders’ best interests. The following guidelines apply with respect to such investments: 2 Public Companies: Passive investments of less than one percent (1%) of the outstanding shares of companies that are listed on a U.S. or international stock exchange or quoted on Nasdaq, are permitted without the Company’s approval, provided that the investment is not so large financially in either absolute dollars or percentage of the individual’s total investment portfolio as to create the appearance of a conflict of interest. Investments that are not within these limits must be approved by the Audit Committee of the Board of Directors, but in such cases approval will likely not be granted. No investment may involve any confidential inside or proprietary information, such as information that may have been learned about the other company as a result of the Company’s relationship with the other company. Private Companies: Any investment in the Company’s vendors, partners, customers or competitors that are privately held requires disclosure to the Ethics Officer. If the employee, officer or director either directly or through the chain of authority at the Company has responsibility to affect or implement the Company’s relationship with another company, review and approval of their investment by the Audit Committee is required, but in such cases approval will likely not be granted. There are other situations in which a conflict of interest may arise. If you have concerns about any situation, follow the steps outlined in the Section entitled “Reporting Violations.” Engaging in any conduct that represents a conflict of interest is strictly prohibited. 3 . Gifts, Bribes and Kickbacks. Other than modest gifts given or received in the normal course of business (including travel or entertainment), neither you nor your relatives may give gifts to, or receive gifts from, the Company’s customers or vendors. Other gifts may be given or accepted only with prior approval of your supervisor or the Company’s management and in no event should you put the Company or yourself in a position that would be embarrassing if information about the gift was made public. When dealing with public officials, employees and directors must avoid any activity that is or appears illegal or unethical. Many federal, state and local governmental bodies strictly prohibit the receipt of any gratuities by their employees, including meals, transportation, lodging and entertainment. You must be aware of and strictly follow these prohibitions. Any employee or director who pays or receives bribes or kickbacks will be immediately terminated and reported as warranted, to the appropriate authorities. A kickback or bribe includes any item intended to improperly obtain favorable treatment, including a bribe to guarantee that the Company will use the services of a particular vendor when such use is not advantageous to the Company. In addition, the U.S. Foreign Corrupt Practices Act (“FCPA”) prohibits giving anything of value, directly or indirectly, to officials of foreign governments or foreign political candidates to obtain or retain business. This prohibition also extends to payments to sales representatives or agents if there is reason to believe that the payment will be used indirectly for a prohibited payment to a foreign official. Violation of the FCPA can result in severe fines and criminal penalties, as well as disciplinary actions by the Company, up to and including termination of employment. 3 Certain small facilitation payments to foreign officials may be permissible under the FCPA if customary in the country or locality and intended to secure routine government action. Governmental Action is “routine” if it is ordinarily and commonly performed by a foreign official and does not involve the exercise of discretion. For instance, routine functions would include setting up a telephone line or expediting a shipment through customs. To ensure legal compliance, before making any facilitation payments, you should consult with the Ethics Officer. 4. Protection and Proper use of Company Assets. Every employee must safeguard company assets from loss or theft, and ensure their efficient use. All company assets should be used only for legitimate business purposes. Company assets include confidential information, intellectual property, computers, office equipment, inventories and supplies. You must appropriately secure all company assets within your control to prevent theft, damage or unauthorized use. Employees may make limited non-business use of the company’s electronic communications systems, provided that such use (i) is occasional (ii) does not interfere with the employee’s professional responsibilities (iii) does not diminish productivity, and (iv) does not violate this code or the company’s electronic communications system policy then in effect. 5 . Confidentiality. In carrying out the company’s business, employees, officers and directors often learn confidential or proprietary information about the company, its customers, vendors or joint venture parties. You may not use or reveal company, customer or vendor confidential or proprietary information to others, except when disclosure is authorized or legally mandated. Additionally, you must take appropriate steps, including without limitation, securing documents, limiting access to computers and electronic media, and proper disposal methods, to prevent unauthorized access to such information. Proprietary and/or confidential information, among other things, includes: business methods; sales, pricing, costing, marketing and all other financial data; strategy; computer code; information regarding the company’s intellectual property, including its technology and products; screens; forms; experimental research; and information about, or received from, the company’s current, former and prospective customers, vendors and employees. 6. Gathering Competitive Information . You may not accept, use or disclose the confidential information of our competitors. When you obtain competitive information, you must not violate our competitors’ rights. Particular care must be taken when dealing with competitors’ customers, ex-customers and ex-employees. Never ask for a competitor’s confidential or proprietary information. Never ask a person to violate a non-competition or non-disclosure agreement. If you are uncertain, the Ethics Officer can assist you. 7. Fair Dealing. Each employee and director shall endeavor to deal fairly with the Company’s shareholders, customers, suppliers, competitors and employees. No Company employee, director or officer should take unfair advantage of anyone through manipulation, concealment, abuse of privileged information, misrepresentation of material facts, or any other unfair-dealing practice. 4 8. Fair Competition and Antitrust Laws. The Company must comply with all applicable fair competition and antitrust laws. These laws attempt to ensure that businesses compete fairly and honestly and prohibit conduct seeking to reduce or restrain competition. If you are uncertain whether a contemplated action raises unfair competition or antitrust issues, the Ethics Officer can assist you. 9. Securities Laws and Insider Trading. It is usually illegal to buy or sell securities using material information not available to the public. Persons who give such undisclosed “inside” information to others may be as liable as persons who trade securities while possessing such information. Securities laws may be violated if you, or any relatives or friends trade in securities of the Company, or any of its customers or vendors, while possessing inside information or unpublished knowledge. If you are uncertain about the legality of a particular trade, you should consult with the Ethics Officer before making any such purchase or sale. 10. Retention of Books and Records. The Company business records must be maintained for the periods specified in the company’s record retention policy or any more specific policies of your business unit. Records may be destroyed only at the expiration of the pertinent period. In no case may documents related to a pending or threatened litigation, government inquiry or under subpoena or other information request, be altered, discarded or destroyed, regardless of the periods specified in the record retention policy. In addition, you may never destroy, alter, or conceal, with an improper purpose, any record or otherwise impede any official proceeding, either personally, in conjunction with, or by attempting to influence, another person. 11. Recordkeeping. The Company requires honest and accurate recording and reporting of information in order make responsible business decisions. This requires that no fund, asset, liability, revenue or expense be concealed or incompletely recorded for any purpose. All entries must be supported by documentation adequate to permit the books and records to be verified by audit. Proper accounting requires not only careful compliance by the Company’s internal auditors, but also the cooperation of all employees who are involved in keeping financial records of any type. a. Full, fair, accurate, timely and understandable disclosures in the Company’s periodic reports to the public and to governmental authorities are legally required and are essential to the success of our business. All filings with the SEC must be fair, accurate and timely. You should exercise the highest standard of care in contributing to or preparing such reports in accordance with the following guidelines: b. All the Company accounting records, as well as reports produced from those records, must be in accordance with the laws of each applicable jurisdiction. c. All records must fairly and accurately reflect the transactions or occurrences to which they relate. d. All records must fairly and accurately reflect, in reasonable detail, the Company’s assets, liabilities, revenues and expenses. 5 e. The Company’s accounting records must not contain any false or intentionally misleading entries. f. No transactions should be intentionally misclassified as to accounts, departments or accounting periods. g. All transactions must be supported by accurate documentation in reasonable detail and recorded in the proper account and in the proper accounting period. h. No information should be concealed from the internal auditors or the independent auditors, who shall have unrestricted access to all documents and records. i. Compliance with the Company’s system of internal accounting controls is required. If you have knowledge of any unreported or improperly reported financial activity you must report the information to your supervisor, the Ethics Officer or the Audit Committee. 12. Reporting Violations. Employees are encouraged to talk to supervisors or the Ethics Officer when in doubt as to the best course of action in a particular situation or about any observed illegal or unethical behavior, or any violations of this Code. Your conduct can reinforce an ethical atmosphere and positively influence the conduct of your fellow employees. If you are powerless to stop suspected misconduct or if you discover it after it has occurred, you must report it promptly to the appropriate level of management at your location. Misconduct cannot be excused because it was directed or requested by another. In this regard, you are expected to alert management promptly whenever an illegal, dishonest or unethical act is discovered or suspected. Management is required to report to the Audit Committee any such reports made to it by any employee. If you are still concerned after speaking with your local management or feel uncomfortable speaking with them for whatever reason, you must (anonymously if you wish) either contact the Ethics Officer by speaking with him or her or sending a detailed note, with relevant documents, to the Ethics Officer delivered to the Company’s address at 75 Town Centre Drive, Rochester, New York 14623, or you may directly contact the Audit Committee of the Company’s Board of Directors by sending a detailed note, with relevant documents, to: Audit Committee Compliance Matters, c/o Vuzix Corporation, 75 Town Centre Drive, Rochester, New York 14623or by email to: auditcommittee@vuzix.com. If you choose to remain anonymous and make an anonymous report, you should create and preserve your own record of this report in order to be able to demonstrate your compliance with the requirement of reporting violations. Reports made to the Ethics Officer will may be reported to the Audit Committee. Your calls, detailed notes and/or e-mails will be dealt with confidentially, although there may be a point where your identity may become known or have to be revealed in the course of an investigation or to take corrective action. You have the commitment of the Company and of the Audit Committee of the Company’s Board of Directors, which is composed of independent directors, that you will be protected from retaliation for your good faith actions. Any employee who attempts to or encourages others to retaliate against an individual who has reported a violation will be subject to disciplinary action. 13. Waivers. The Company expects you to comply with the provisions of this Code. Any waiver of this Code for executive officers or directors may be made only by the Board of Directors and will be promptly disclosed to the public as required by law and the rules of the American Stock Exchange. When necessary, a waiver will be accompanied by appropriate controls designed to protect the Company. 6 CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM Exhibit 23.1 We consent to the incorporation by reference in S-3 Registration Statements (No. 333-209304 and 333-202045) of Vuzix Corporation of our report dated March 30, 2016, relating to our audit of the consolidated financial statements, which appear in the Annual Report on Form 10-K of Vuzix Corporation for the year ended December 31, 2015. /s/ Freed Maxick CPAs, P.C. Rochester, New York March 30, 2016 Exhibit 31.1 CERTIFICATION PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002 I, Paul J. Travers, certify that: 1. I have reviewed this Annual Report on Form 10-K of Vuzix Corporation; 2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report; 3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report; 4. The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have: (a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared; (b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; (c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and (d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and 5. The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions): (a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and (b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting. Date: March 30, 2016 /s/ Paul J. Travers Paul J. Travers Chief Executive Officer Exhibit 31.2 CERTIFICATION PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002 I, Grant Russell, certify that: 1. I have reviewed this Annual Report on Form 10-K of Vuzix Corporation; 2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report; 3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report; 4. The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have: (a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared; (b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; (c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and (d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and 5. The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions): (a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and (b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting. Date: March 30, 2016 /s/ Grant Russell Grant Russell Chief Financial Officer CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002 Exhibit 32.1 In connection with the Annual Report of Vuzix Corporation (“Vuzix”) on Form 10-K for the fiscal year ended December 31, 2015 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Paul J. Travers, Chief Executive Officer of Vuzix, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that: (1) The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and (2) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of Vuzix. Date: March 30, 2016 /s/ Paul J. Travers Paul J. Travers Chief Executive Officer CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002 Exhibit 32.2 In connection with the Annual Report of Vuzix Corporation (“Vuzix”) on Form 10-K for the fiscal year ended December 31, 2015 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Grant Russell, Chief Financial Officer of Vuzix, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that: (1) The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and (2) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of Vuzix. Date: March 30, 2016 /s/ Grant Russell Grant Russell Chief Financial Officer 

Continue reading text version or see original annual report in PDF format above