UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15 (D) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2013
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934
For transition period from __________ to __________
Commission file number 1-32302
ANTARES PHARMA, INC.
(Exact name of registrant as specified in its charter)
A Delaware corporation
I.R.S. Employer Identification No. 41-1350192
100 Princeton South, Suite 300, Ewing, NJ 08628
Registrant’s telephone number, including area code: (609) 359-3020
Securities registered pursuant to section 12(b) of the Act:
Title of each class
Common Stock
Name of each exchange on which registered
NASDAQ Capital Market
Securities registered pursuant to section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
YES[ ] NO[X]
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
YES[ ] NO[X]
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the
Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was
required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. YES[X] NO[ ]
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any,
every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the
preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
YES[X] NO[ ]
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein,
and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or
a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting
company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer [ ] Accelerated filer [X] Non –accelerated filer [ ] Smaller reporting company [ ]
(Do not check if a smaller reporting company)
Indicate by check mark if the registrant is a shell company (as defined in Rule 12b-2 of the Act). YES[ ] NO[X]
Aggregate market value of the voting and non-voting common stock held by nonaffiliates of the registrant as of June 30,
2013, was $472,932,000 (based upon the last reported sale price of $4.16 per share on June 28, 2013, on the NASDAQ
Capital Market).
There were 129,928,018 shares of common stock outstanding as of March 7, 2014.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the definitive proxy statement for the registrant’s 2014 annual meeting of stockholders to be filed within 120
days after the end of the period covered by this annual report on Form 10-K are incorporated by reference into Part III
of this annual report on Form 10-K.
ANTARES PHARMA, INC.
FORM 10-K
TABLE OF CONTENTS
PART I
Item 1
Item 1A
Item 1B
Item 2
Item 3
Item 4
Business
Risk Factors
Unresolved Staff Comments
Properties
Legal Proceedings
Mine Safety Disclosures
PART II
Item 5
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer
Purchases of Equity Securities
Item 6
Item 7
Item 7A
Item 8
Item 9
Item 9A
Item 9B
Selected Financial Data
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures About Market Risk
Financial Statements and Supplementary Data
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
Controls and Procedures
Other Information
PART III
Item 10
Item 11
Item 12
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related
Stockholder Matters
Item 13
Item 14
Certain Relationships and Related Transactions, and Director Independence
Principal Accounting Fees and Services
Item 15
Exhibits and Financial Statement Schedules
Signatures
PART IV
1
28
44
44
45
45
46
48
49
59
61
85
85
86
86
86
86
87
87
88
91
PART I
Item 1.
BUSINESS
Forward-Looking Statements
This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of
1933, as amended, Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and the
Private Securities Litigation Reform Act of 1995 that are subject to risks and uncertainties. You should not place
undue reliance on those statements because they are subject to numerous uncertainties and factors relating to our
operations and business environment, all of which are difficult to predict and many of which are beyond our control.
You can identify these statements by the fact that they do not relate strictly to historical or current facts. Such
statements may include words such as “anticipate,” “will,” “estimate,” “expect,” “project,” “intend,” “should,”
“plan,” “believe,” “hope,” and other words and terms of similar meaning in connection with any discussion of,
among other things, future operating or financial performance, strategic initiatives and business strategies,
regulatory or competitive environments, our intellectual property and product development. In particular, these
forward-looking statements include, among others, statements about:
our expectations regarding commercialization of OTREXUP™ (methotrexate injection);
our expectations regarding product developments with Teva Pharmaceutical Industries, Ltd. (“Teva”);
our expectations regarding product development and potential U.S. Food and Drug Administration
(“FDA”) approval of Vibex® QuickShot™ (“Vibex® QS T”) (testosterone injection);
our expectations regarding product development and potential FDA approval of Vibex® Sumatriptan
(sumatriptan injection);
our expectations regarding product development and potential FDA approval of Vibex® Epinephrine
(epinephrine injection);
our expectations regarding trends in pharmaceutical drug delivery characteristics;
our anticipated continued reliance on contract manufacturers to manufacture our products;
our sales and marketing plans;
product development and commercialization plans regarding our other products and product candidates;
our future cash flow and our ability to support our operations;
our projected net loss for the year ending December 31, 2014;
our ability to raise additional funds, if needed; and
other statements regarding matters that are not historical facts or statements of current condition.
These forward-looking statements are based on assumptions that we have made in light of our industry
experience as well as our perceptions of historical trends, current conditions, expected future developments and
other factors we believe are appropriate under the circumstances. As you read and consider this annual report, you
should understand that these statements are not guarantees of performance results. They involve risks, uncertainties
and assumptions. Although we believe that these forward-looking statements are based on reasonable assumptions,
you should be aware that many factors could affect our actual financial results or results of operations and could
cause actual results to differ materially from those in the forward-looking statements. You should keep in mind that
forward-looking statements made by us in this annual report speak only as of the date of this annual report. Actual
results could differ materially from those currently anticipated as a result of a number of risk factors, including, but
not limited to, the risks and uncertainties discussed under the caption “Risk Factors.” New risks and uncertainties
come up from time to time, and it is impossible for us to predict these events or how they may affect us. We do not
undertake to update or revise the forward-looking statements in this annual report after the date of this annual report
except as required by law. In light of these risks and uncertainties, you should keep in mind that any forward-
looking statement in this annual report or elsewhere might not occur.
Overview
Antares Pharma, Inc. (“Antares,” “we,” “our,” “us” or the “Company”) is an emerging specialty pharmaceutical
company that focuses on developing and commercializing self-administered parenteral pharmaceutical products and
1
technologies. We have numerous partnerships with pharmaceutical companies as well as multiple internal product
development programs.
On October 14, 2013 we announced the approval of OTREXUP™ (methotrexate) injection by the FDA, and in
January 2014 we announced the product launch of OTREXUP™. OTREXUP™, our proprietary combination
product comprised of a pre-filled methotrexate syringe and our Medi-Jet™ self-injection system, is indicated for
adults with severe active rheumatoid arthritis (“RA”) or children with active polyarticular juvenile idiopathic
arthritis and adults with severe recalcitrant psoriasis. OTREXUP™ is the first FDA approved subcutaneous
methotrexate for once weekly self-administration with an easy-to-use, single dose, disposable auto injector. We
have worldwide marketing rights for OTREXUP™ and will commercialize OTREXUP™ on our own in the U.S. for
the treatment of RA. We have provided LEO Pharma an exclusive license to commercialize OTREXUP™ in the
U.S. for the treatment of psoriasis.
We have developed both subcutaneous and intramuscular injection technology systems which include Vibex®
disposable pressure-assisted auto injectors, reusable needle-free injectors, and disposable multi-use pen injectors. In
addition to the development of OTREXUP™, we have other internal development programs in process, and are
currently conducting clinical studies of Vibex® QS T for testosterone replacement therapy and manufacturing
development work for Vibex® QS M for an undisclosed central nervous system (“CNS”) indication. We have
licensed our reusable needle-free injection device for use with human growth hormone (“hGH”) to Teva, Ferring
Pharmaceuticals BV (“Ferring”) and JCR Pharmaceuticals Co., Ltd. (“JCR”), with Teva and Ferring being two of
our primary customers. Teva markets our needle-free injection device as the Tjet® injector system to administer
their 5mg Tev-Tropin® brand hGH promoted in the U.S. and Ferring commercialized our needle-free injection
system with their 4mg and 10mg hGH formulations marketed as Zomajet® 2 Vision and Zomajet® Vision X,
respectively, in Europe and Asia. We have also licensed both the Vibex® disposable auto injector and pen injection
devices to Teva for use in certain fields and territories and we are engaged in product development activities for
Teva utilizing these devices.
We also have a portfolio of gel-based products. We received FDA approval in December 2011 for an
oxybutynin gel product, Gelnique 3%™, for the treatment of overactive bladder (“OAB”). We have a licensing
agreement with Actavis under which Actavis is currently marketing Gelnique 3%™ in the U.S. In January 2012, we
entered into a licensing agreement with Daewoong Pharmaceuticals (“Daewoong”) under which Daewoong will
commercialize our oxybutynin gel 3% product, once approved in South Korea. Our gel portfolio of products also
includes Elestrin® (estradiol gel) currently marketed by Meda Pharmaceuticals (“Meda”) in the U.S. for the
treatment of moderate-to-severe vasomotor symptoms associated with menopause.
Our products and product opportunities are summarized and briefly described below:
Product
Drug
Partners
Preclinical
Clinical
Filed
Approved
Marketed
OTREXUP™
OTREXUP™
Tjet® Needle-free Injector
Zomajet® Needle-free
Injector
Twin-Jector® EZ II Needle-
free Injector
Elestrin®
Oxybutynin Gel 3%
Oxybutynin Gel 3%
Vibex® Auto Injector
Vibex® Auto Injector
Vibex® QS T
Vibex® QS M
Disposable Pen Injector
Disposable Pen Injector
Undisclosed
Methotrexate (RA)
Methotrexate (Psoriasis)
hGH
hGH
hGH
Estradiol
Oxybutynin
Oxybutynin
Epinephrine
Sumatriptan
Testosterone
Undisclosed
Undisclosed Product #1
Undisclosed Product #2
Undisclosed
Nestragel™
Nestorone®
None
LEO
Teva
Ferring
JCR
Meda
Actavis
Daewoong
Teva
Teva
None
None
Teva
Teva
Pfizer
Population
Council
2
Currently our only reportable segment is drug delivery, which includes the development of injection devices
and injection based pharmaceutical products as well as transdermal gel products. See Note 10 to the Consolidated
Financial Statements for segment financial information.
History
On January 31, 2001, we (Antares, formerly known as Medi-Ject Corporation, or Medi-Ject) completed a
business combination to acquire the operating subsidiaries of Permatec Holding AG (“Permatec”), headquartered in
Basel, Switzerland. Medi-Ject was at that time, focused on delivering drugs across the skin using needle-free
technology, and Permatec specialized in delivering drugs across the skin using gel technologies. With both
companies focused on drug delivery but with a focus on different sectors, it was believed that a business
combination would be attractive to both pharmaceutical partners and to our stockholders. Upon completion of the
transaction our name was changed from Medi-Ject Corporation to Antares Pharma, Inc.
Our Parenteral Products Group is located in Minneapolis, Minnesota, where we develop and manufacture for
ourselves and with partners novel pressure assisted injectors, with and without needles, which allow patients to self-
inject drugs. We make a reusable, needle-free, spring-action injector device known as the Tjet® and Zomajet®,
which is marketed for use with human growth hormone. We have had success in achieving distribution of our
device for use with hGH through licenses to pharmaceutical partners, and it has resulted in product sales and
royalties. Distribution of growth hormone injectors occurs in the U.S., Europe, Japan and other Asian countries
through our pharmaceutical company relationships.
We have also developed variations of the needle-free injector by adding a small shielded needle to a pre-filled,
single-use disposable injector, called the Vibex® pressure assisted auto injection system. This system is an
alternative to the needle-free system for use with injectable drugs in unit dose containers and is suitable for branded
and generic injectables. We also developed a disposable multi-dose pen injector for use with standard multi-dose
cartridges. We have entered into multiple licenses for these devices mainly in the U.S., Europe and Canada with
Teva. We have also developed the Medi-Jet™ auto injector for our product OTREXUP™, for delivery of
methotrexate for treatment of rheumatoid arthritis and psoriasis.
On October 14, 2013 we announced the approval of OTREXUP™ (methotrexate) injection by the FDA.
OTREXUP™ is the first FDA approved subcutaneous methotrexate for once weekly self-administration with an
easy-to-use, single dose, disposable auto injector. Additionally, we are developing our next internally developed
combination product, Vibex® QS T for testosterone replacement therapy. We have also initiated manufacturing
development work for a third internal combination product, Vibex® QS M.
Our Product Development Group, located in Ewing, New Jersey, heads the clinical, regulatory and pre-
commercial development of our internal drug/device combination products.
Our Product Development Group also led the successful development of FDA approved gel-based products. In
2006, the FDA approved our first transdermal gel (Elestrin®) with a partner’s drug product for the treatment of
vasomotor symptoms in post-menopausal women. In December 2011, we received FDA approval for our topical
oxybutynin gel product, Gelnique 3%™, for the treatment of OAB. In April 2012, our licensee, Actavis, launched
Gelnique 3%™ in the U.S.
Antares Pharmaceuticals, our commercial organization is also located in Ewing, New Jersey, and is responsible
for sales, marketing, medical affairs, trade, and third party reimbursement for our internally developed products. In
January 2014 we launched OTREXUP™, and are calling on rheumatologists for the indication of severe rheumatoid
arthritis. In March 2014, LEO Pharma began detailing OTREXUP™ to dermatologists for the indication of
psoriasis.
We are a Delaware corporation with principal executive offices located at 100 Princeton South, Suite 300,
Ewing, New Jersey 08628. Our telephone number is (609) 359-3020. We have wholly-owned subsidiaries in
Switzerland (Antares Pharma AG and Antares Pharma IPL AG) and in the United Kingdom (Antares Pharma UK
Limited).
3
Market Overview
Our focus is specifically on the market for delivery of self-administered injectable drugs, comprised of non-
biologic small molecule drugs and biological products or biosimilars. We believe that many injectable products
currently offered in vials could be replaced with user friendly auto injectors promoting better compliance and
improvement in dose accuracy. Several manufacturers of injectable products have introduced convenient
alternatives to vials, such as prefilled syringes and injector systems; and an increasing proportion of people who
self-administer drugs are transitioning to prefilled syringes and other injector systems when offered. We believe that
our injection technologies and products offer further improvements in convenience and comfort for patients self-
administering injectable products as well as provide the appropriate technique to the patient to accurately self-inject
and that our business model of developing our own pharmaceutical products in targeted therapeutic categories using
our pressure assisted auto injectors and pen injectors has the potential for further market penetration in the future.
Also, partnering with pharmaceutical manufacturers of injectable products that are outside of our therapeutic focus
offers us additional potential to profit from our proprietary injector systems.
SELF-ADMINISTRATION OF INJECTABLE DRUGS
Injectable drugs are often used in managing chronic medical conditions, presenting a need for repeated
injections over time. Cost containment pressure by managed care combined with patient preferences for
convenience and comfort are driving a change in the treatment setting from the health care facility to patients’
homes. This trend is creating a shift from the injection being given by a doctor or nurse to self-administration by the
patient or administration by a family member or other lay caregiver. This shift has produced a transition in how
injectable drugs are configured to facilitate use by consumers. In many therapeutic categories pre-filled syringes
and other injection systems offering greater ease-of-use and security for patients now exceed vials in unit volume,
often at substantial unit price premium. These therapeutic categories and example products include:
Condition
Diabetes
Growth deficiency
Rheumatoid Arthritis
Multiple Sclerosis
Chronic Hepatitis C
Anemia/Neutropenia
Migraine
Allergic Emergency
(Roche), Noridtropin
Products
Humalog (Lilly), Humulin (Lilly), Novolog (Novo Nordisk),
Apidra (Sanofi Aventis), Lantus (Sanofi Aventis), Levemir
(Novo Nordisk), Byetta (Lilly)
Genotropin (Pfizer), Tev-Tropin (Teva), Humatrope (Lilly),
(Novo Nordisk),
Nutropin AQ
Saizen/Serostem (EMD Serono), Omnitrope (Sandoz)
Enbrel (Amgen), Humira (Abbvie), Simponi (Centocor Ortho
Biotech), Cimzia (UCB)
Avonex (Biogen Idec), Betaseron (Bayer), Copaxone (Teva),
Rebif (EMD Serono)
Intron-A (Merck), Pegasys (Roche), Peg-Intron (Merck)
Aranesp (Amgen), Neulasta (Amgen)
Imitrex (GSK, Par, Sandoz), Sumavel (Zogenix), Alsuma (Pfizer)
Sumatriptan Autoinjector (Sun Pharma)
Epipen (Pfizer), Twinject (Amedra), Auvi-Q (Sanofi)
In addition to the drugs listed in the table above and the products we already have in development, we have
identified more than 60 additional injectable single and multi-source drug products currently on the market that are
appropriate for self-administration and are candidates for our device technologies.
Non-biologic injectable drugs
According to a June 2013 Bank of America Merrill Lynch report, non-biologic injectables accounted for
roughly 15% of the U.S. pharma market in 2012, making the segment valued at $49.0 billion. Generic injectables
accounted for about $7.0 billion in 2012, which represents a disproportionately large proportion of unit volume due
to substantially lower unit cost compared to branded injectable products. Based on the Bank of America Merrill
Lynch analysis, roughly 60 products representing approximately $16.0 billion worth of branded injectable sales
could face first-time generic competition in 2013-2022. Converting patent expirations into generic sales, excluding
4
biologics and assuming no base-business erosion, they estimate U.S. generic injectables could grow from $7.0
billion in 2012 to between $10.0 billion and $12.2 billion in 2017-2022.
Many non-biologic small molecule drugs are injected rather than taken orally for one or more of several reasons
including improved absorption, onset of action, tolerability and safety. Our OTREXUP™ product is an example of
changing the route of administration from oral to injection for better absorption and tolerability. Vibex® Sumatriptan
and Vibex® Epinephrine are examples of using the injection route for faster onset of action. Generic products, like
sumatriptan and methotrexate, are the majority of non-biologic injectable product volume in the current market.
THERAPEUTIC MARKET OPPORTUNITIES FOR OUR INJECTOR SYSTEMS
OTREXUP™ (methotrexate) injection
OTREXUP™ is our proprietary combination product comprised of a pre-filled methotrexate syringe and our
Medi-Jet™ self-injection system designed to enable rheumatoid arthritis and psoriasis patients to self-inject
methotrexate reliably, comfortably, and conveniently at home. On October 14, 2013, we announced the FDA had
approved OTREXUP™ (methotrexate) injection, the first FDA approved subcutaneous methotrexate for once
weekly self-administration with an easy-to-use, single dose, disposable auto injector. OTREXUP™ is indicated for
use in adults with severe active rheumatoid arthritis or children with active polyarticular-course juvenile idiopathic
rheumatoid arthritis, and adults with severe recalcitrant psoriasis. Rheumatoid arthritis is a chronic autoimmune
disease in which an affected person’s white blood cells (leukocytes) attack the synovial tissues surrounding the
joints, resulting in pain, stiffness, swelling, joint damage, and loss of function of the joints. According to a study
sponsored by the Arthritis Foundation, rheumatoid arthritis affects approximately 1.5 million Americans, which is
almost 1% of the U.S. population. The disease onset generally occurs between the ages of 30 to 60 years and is
about three times as prevalent among women as among men. According to Symphony Health Solutions, U.S. sales
of biologic agents products approved to treat rheumatoid arthritis were approximately $18.2 billion in 2013. Some
of these agents are also approved for other indications including plaque psoriasis, Crohn’s disease, ulcerative colitis,
juvenile idiopathic, ankylosing spondylitis, and psoriatic arthritis, making it difficult to determine the proportion of
sales attributable to use in rheumatoid arthritis.
Methotrexate is the most commonly prescribed disease modifying anti-rheumatic drug (DMARD), used in an
estimated 70% of rheumatoid arthritis patients. Methotrexate is started at a low dose, generally 7.5mg given orally,
once-a-week, and titrated up for greater therapeutic effect, or until the patient incurs side effects. The maximum oral
dose given is generally 20mg to 25mg per week (8 to 10, 2.5mg tablets given in one dose). Studies have reported as
many as 30% to 60% of patients experience gastrointestinal side effects with oral methotrexate, preventing further
dose escalation or requiring discontinuation in some patients. Also, the extent of oral absorption of methotrexate
varies considerably between patients and we have shown in a clinical study plateaus with increasing doses, which
may also contribute to insufficient therapeutic response even after dose escalation. Published studies have shown
that switching patients from oral to parenteral methotrexate improves absorption and has been associated with
improved therapeutic response. Additionally, some studies have shown a lower incidence of gastrointestinal side
effects in patients that were switched from oral to parenteral methotrexate.
Other rheumatological conditions for which methotrexate is an approved treatment are polyarticular-course
juvenile idiopathic rheumatoid arthritis (JIA), in children who have had an insufficient therapeutic response to, or
are intolerant of, an adequate trial of first-line therapy including full dose non-steroidal anti-inflammatory agents
(NSAIDs) and in patients with severe, recalcitrant, disabling psoriasis that is not adequately responsive to other
forms of therapy after a definite diagnosis has been established, as by biopsy, for example. The recommended
dosing schedule for methotrexate in psoriasis is 10 to 25 mg per week until adequate response is achieved. In JIA
the recommended dosing range is 10 mg/m2 to 30 mg/m2 given once weekly.
Psoriasis is believed to be an autoimmune disease, characterized by thick patches of inflamed, scaly skin,
created by abnormal, rapid, and excessive proliferation of skin cells. The National Psoriasis Foundation has stated
that psoriasis is the most prevalent autoimmune disease in the U.S. According to current studies, as many as 7.5
million Americans, or approximately 2.2% of the population suffer from psoriasis, with a higher incidence in
Caucasians. And, according to the World Psoriasis Day consortium, 125 million people worldwide, or 2% to 3% of
the total population have psoriasis.
5
JIA is the most common rheumatic disease in childhood with an estimated prevalence between 7 and 400 for
every 100,000 children. According to the Arthritis Foundation, JIA affects nearly 300,000 children in the U.S.
Most forms of JIA are autoimmune disorders that cause pain, swelling, stiffness, and loss of motion in the joints. It
can persist over many years and can also lead to disability and dysfunction in adulthood.
We believe that OTREXUP™ offers physicians and patients an important alternative to oral methotrexate
tablets and vials of the injectable form of the drug. Many patients who start on oral methotrexate fail to achieve
adequate therapeutic results due in part to poor oral absorption or poor tolerability. Published studies have
demonstrated that switching to a parenteral route of administration can improve absorption; however, fewer than
10% of patients on methotrexate are being prescribed the injectable form. Instead, patients who fail to achieve
adequate response on oral methotrexate are often prescribed a biologic response modifier (biologic). The biologics
have been demonstrated to improve the patient’s therapeutic response when added to methotrexate. However,
according to Source Healthcare Analytics and published in the December 2012 issue of Consumer Reports, the
average retail price for biologics was in excess of $32,000 annually, excluding administrative and other fees that
could be incurred. Biologics have shown to have their own limitations including increasing the risk of serious
infections and certain malignancies and are not appropriate for all patients. OTREXUP™ could offer physicians
and patients a convenient, practical and cost-effective option for administering parenteral methotrexate as an
alternative to proceeding directly from oral methotrexate to biologics. Additionally, OTREXUP™ is a self-
contained injection device which should minimize accidental contact with methotrexate, a hazardous drug agent.
In an independent marketing survey of rheumatologists commissioned by Antares, the OTREXUP™ product
concept was well received with the majority of physicians expressing interest in having the product available as an
option for their patients. Physicians surveyed cited the potential advantages of parenteral vs. oral methotrexate and
the auto injector system to improve patient acceptance of self-injection, while also assuring dosing accuracy, as
specific advantages of prescribing the product.
Vibex® QS T (testosterone)
Vibex® QS T is the Company’s wholly owned, proprietary combination product that consists of testosterone and
our next generation Vibex® QS auto injector in development for the treatment of testosterone deficiency or
testosterone replacement therapy. The Vibex® QS auto injector is designed specifically to provide a fast injection
of highly-viscous fluids such as testosterone in oil.
The U.S. testosterone replacement therapy (TRT) market in 2013 was approximately $2.8 billion according to a
Symphony Health Solutions report, and grew 17% vs. 2012. According to a Global Industry Analysts report, the
market is projected to be $5.0 billion by 2017. There is significant competition with the TRT market between many
pharmaceutical companies including Abbvie (formerly Abbott), Lilly, Endo, Pfizer, Actavis, Auxilium, Sandoz,
Mylan, Bedford Labs, and Teva.
According to the Urology Care Foundation, low serum testosterone, also known as hypogonadism or
Andropause, affects roughly 39% of men over the age of 45. The prevalence of low testosterone increases with age.
Researchers have found that the incidence of low testosterone increases from approximately 20% of men over 60, to
30% of men over 70 and 50% of men over 80 years of age. Forbes.com estimates 13 million men in the U.S. suffer
from lower than average testosterone. Symptoms and health risks associated with low testosterone include reduced
libido, compromised sexual function, loss of bone density, reduced muscle mass, lethargy, mood disorders, impaired
cognition, and cardiovascular disease. Several factors, including low awareness, embarrassment and stigma
associated with low testosterone are believed to contribute to the relatively low diagnosis and treatment levels.
Testosterone replacement therapy is given to restore patients’ testosterone levels to within the normal range,
generally defined as 300 to 1100 nanograms per deciliter (ng/dL) of serum. The Association of Clinical
Endocrinologists (AACE) guidelines for treatment state that men with testosterone levels less than 200 ng/dL are
definite candidates for therapy. AACE states the potential benefits of therapy are restored libido and erectile
function, increased energy levels, and improved mood. TRT can also improve body composition by decreasing fat
mass, increase lean body mass, potentially increase muscle strength, and stabilize or increase bone mineral density,
as well as reduce bone fractures.
6
Topical formulations such as Androgel, Testim, Fortesta, Axiron, dermal patches and buccal delivery are the
most frequently prescribed versions of TRT, accounting for nearly 70% of prescriptions according to Symphony
Health Solutions. Injectable testosterone formulations including implantable pellets account for nearly 30% of
prescriptions.
Not all men are able to adequately absorb the gel formulations or otherwise find them unacceptable for reasons
including risks of transferring the gel to spouses or children or dissatisfaction with the application process.
Injectable testosterone is an option for men who prefer to avoid gels or have inadequate response. The injections are
usually given deep into the muscle tissue of the buttocks with large bore needles (typically 19 gauge needles).
Injection testosterone is an esterified formulation in oil which is absorbed slowly from the muscle tissue, producing
a sustained increase in serum testosterone over time, requiring repeated injections typically administered in the
physician’s office every two to four weeks. The higher doses given to facilitate less frequent injections are
sometimes associated with supra-physiologic levels. Such high levels may lead to polycythemia, a proliferation of
red blood cells, which places the patient at increased risk of thrombus or clot formation leading to strokes, heart
attacks, pulmonary embolism, and possibly death. Excessive variability between peak testosterone levels occurring
shortly after the injection to the lowest levels immediately preceding a dose are also associated with mood swings.
For these reasons the Company is developing Vibex® QS T as a once-weekly subcutaneous injectable testosterone
product that could be conveniently self-administered at potentially lower dosages given more frequently than is
generally practical with repeated visits to the physician’s office. The Vibex® QS T utilizes a small 27 gauge needle
for patient comfort.
Tjet® / Zomajet® (hGH)
Tjet® / Zomajet® is our needle-free auto injector offered by Teva and Ferring, respectively, to patients who use
their brands of hGH. It is designed to deliver hGH treatment to children without the use of a needle.
According to Symphony Health Solutions, hGH sales in the U.S. were $1.0 billion in 2013. There is significant
competition within the hGH market between major pharmaceutical companies such as Lilly, Roche, Pfizer,
NovoNordisk, Sandoz, Teva and Merck Serono among others. We believe that product attributes, including patient
comfort and ease-of-use, play a key role, along with price and promotion, in determining performance in the market.
Our pharmaceutical partner in Europe, Ferring, has an established branded product in the hGH market using our
needle-free injector, marketed as the Zomajet® 2 Vision for their 4 mg formulation and Zomajet® Vision X for their
10 mg formulation. Teva entered the hGH market without the benefit of an injection device and initially struggled
to gain market share. Since the launch of the Tjet® needle-free device in late 2009, gross sales of Teva’s hGH Tev-
Tropin® continue to increase year over year. This trend supports the notion that devices can increase patient use of a
partner’s brand of drug due to the benefits of a device. Teva’s net sales of Tev-Tropin® are stable, but continue to
be subject to high discounts and rebates due to a very competitive market. We sell the Tjet® and Zomajet® devices
along with disposables to our partners as well as receive a royalty on net sales of the hGH product.
Vibex® with Epinephrine
We have a license agreement with Teva for our Vibex® system which we have designed for a product
containing epinephrine and have scaled up the commercial tooling and molds for this product. We are awaiting
FDA approval of the product as a generic substitute of Pfizer’s branded product, EpiPen®, which is distributed by
Mylan, Inc.
The EpiPen® is the global market leader in the epinephrine auto injector market. In the U.S., according to
Symphony Health Solutions, sales of epinephrine injection products were approximately $1.0 billion in 2013 with
the EpiPen® accounting for 91% of the total. Mylan, Inc. reported that EpiPen® has a 90% world market share in
the U.S. and worldwide. Epinephrine is utilized for the treatment of severe allergic reactions (anaphylaxis) to insect
venom, foods, drugs and other allergens as well as anaphylaxis to unknown substances or exercise-induced
anaphylaxis.
7
Vibex® with Sumatriptan
We have a license agreement with Teva for our Vibex® system which we have designed for a product
containing sumatriptan and are in the process of scaling up the commercial tooling and molds for this product. We
are awaiting FDA approval of the product as a generic substitute of GlaxoSmithKline’s branded product, Imitrex®
STATdose Pen®. In the U.S., according to Symphony Health solutions, sales of migraine products were about $2.4
billion in 2013. Oral drugs accounted for $2.0 billion of the total. Injectable and nasal products accounted for about
$440 million.
According to a survey commissioned by the National Headache Foundation migraines affect nearly 37 million
Americans. Migraine headaches are often characterized by a headache of moderate or severe intensity, nausea (the
most common characteristic), one-sided and/or pulsating quality, aggravated by routine physical activity, duration of
hours to 2-3 days; and an attack frequency anywhere between once a year and once a week. Healthcare
professionals frequently prescribe triptans to stop migraine attacks , such as GSK’s Imitrex (sumatriptan) and
Amerge (naratriptan); Pfizer’s Relpax (eletriptan), Merck’s Maxalt (rizatriptan), Impax Laboratories’ Zomig
(zolmitriptan), Janssen Pharmaceuticals’ Axert (almotriptan), and Endo Pharmaceuticals’ Frova (frovatriptan) to
relieve acute symptoms of a migraine attack (Medco claims database study).
The majority of patients who use triptans take oral tablets. While the oral triptans have benefited many
migraine sufferers, they are most consistently effective when taken at a relatively early stage in the migraine attack.
None is as effective – and as rapid-acting as injectable sumatriptan in treating a migraine headache that has reached
the moderate to severe level of intensity. About 9% of triptan prescriptions are for injectable triptans. Sumatriptan
is the only injectable triptan approved for use in the U.S. Several manufacturers offer versions of injectable
sumatriptan with a delivery device, including GSK (Imitrex StatDose), Pfizer (Alsuma) Zogenix (Sumavel
DosePro), and Sun Pharma (generic sumatriptan autoinjector) and recently Dr. Reddy’s Laboratories (generic
sumatriptan autoinjector). Two companies, Par and Sandoz, market authorized generic versions of GSK’s Imitrex
STATdose. At least three companies, including Bedford Labs, Teva, and Fresenius Kabi have FDA approval to
market injection sumatriptan in prefilled syringes, although we are not aware of any that presently market this
product configuration. Additionally, several generics manufacturers offer injectable sumatriptan in vials.
Other Injectable Drugs
Other injectable drugs that are presently self-administered and may be suitable for injection with our systems
include therapies for the prevention of blood clots and treatments for multiple sclerosis, inflammatory diseases,
impotence, infertility, AIDS and hepatitis. We believe that many injectable drugs currently under development will
be administered by self-injection once they reach the market. Our belief is supported by the continuing development
of important chronic care products that can only be given by injection, the ongoing effort to reduce hospital and
institutional costs by early patient release, and the gathering momentum of new classes of drugs that require
injection. A partial list of such drugs (and their manufacturer) introduced in recent years that require self-injection
include Cimzia® (UCB), Simponi® (Centocor Ortho Biotech), Enbrel® (Amgen, Pfizer) and Humira® (Abbvie) for
treatment of rheumatoid arthritis, Epogen® and Aranesp® (Amgen) for treatment of anemia, Forteo™ (Lilly) for
treatment of osteoporosis, Intron® A (Merck) and Roferon® (Roche) for hepatitis C, Lantus® (Sanofi Aventis) and
Byetta® (Bristol Myers) for diabetes, Rebif® (EMD Serono) for multiple sclerosis, Copaxone® (Teva) for multiple
sclerosis and Gonal-F® (EMD Serono) for fertility treatment.
THERAPEUTIC MARKET OPPORTUNITIES FOR TRANSDERMAL GEL PRODUCTS
Oxybutynin Gel 3%
Our topical oxybutynin gel 3% product for the treatment of OAB was approved by the FDA in December 2011.
According to Symphony Health Solutions, the U.S. OAB market value was about $1.4 billion, based on over 9.7
million prescriptions written in 2013. OAB is a condition marked by urinary urgency, which is a sudden need to
urinate that can happen at any time whether or not the bladder is full. OAB is typically caused when the smooth
muscle of the bladder undergoes involuntary contractions and may result in uncontrolled leakage. OAB is defined as
urgency, with or without incontinence and usually includes increased urinary voiding frequency and nocturia
(waking up one or more times during the night to urinate). According to published reports it is estimated that more
8
than 30 million Americans have OAB, and while it can happen at any age is more prevalent among older
individuals. Patient acceptance of older incontinence drugs, such as oral oxybutynin, is hindered by anticholinergic
side-effects including moderate to severe dry mouth, constipation and somnolence. A goal of transdermal delivery
is to minimize these common anticholinergic side effects.
In July 2011 we licensed our oxybutynin gel 3% product to Actavis for commercialization in the U.S. and
Canada and in January 2012 we licensed this product to Daewoong Pharmaceuticals for commercialization, once
approved in South Korea. The product was approved by the FDA in December 2011 and in April 2012 we
announced, with Actavis, the launch of Gelnique 3% in the U.S.
Actavis is currently marketing Gelnique 3% along with Gelnique 10% with a large sales force focused on
urologists. Gelnique has not experienced the patient acceptance originally anticipated and is a small product in this
field. We receive royalties on net sales of both Gelnique 3% and Gelnique 10%.
Elestrin®
According to Symphony Health Solutions, the U.S. hormone replacement market, including estrogens,
progestogens, and estrogen-progestogen and estrogen-androgen combinations, was $1.7 billion in 2013. According
to industry estimates, approximately six million women in the U.S. currently are receiving some form of estrogen or
combined estrogen hormone therapy. Elestrin®, which is currently being marketed by Meda as an estrogen
replacement gel for the treatment of hot flashes, has been steadily growing month over month but is still a relatively
small product in this market. We receive a single digit royalty from Meda on the net end sales of Elestrin®.
Nestragel™ (Contraception)
According to IMS Health, the U.S. contraceptives market in 2013 was $4.9 billion. Oral contraceptives account
for the majority of the market with the remainder consisting of hormonal implants and patches, injections and intra-
uterine systems. Transdermal contraceptive systems potentially provide women an attractive alternative to the pill
by offering convenience and discretion. The Company has a development agreement with the Population Council
(an international, nonprofit research organization) to develop a novel hormonal contraceptive comprising a
combination of the progestin Nestorone® and a form of estrogen, called 17β-estradiol (E2), which is chemically
identical to the naturally occurring estrogen. This combination was chosen because of its potential for offering a
superior tolerability and safety profile compared to other commonly used hormonal contraceptives. Nestorone is a
novel synthetic progestin that has been shown to be effective at stopping ovulation at a low dose. It is not active
when taken orally and is therefore especially appropriate for topical application.
We have a joint development agreement with the Population Council, to develop a contraceptive formulation
product containing Nestorone®, by using the Population Council’s patented compound and other proprietary
information covering the compound, and our transdermal delivery gel. We are responsible for research and
development activities as they relate to the gel and the Population Council will be responsible for clinical trial
design development and management. Together, we are looking for a commercial development partner to complete
the development of this product.
Technology and Product Platforms
We are leveraging our experience in device technologies to enhance the product performance of established
drugs as well as new drugs in development. Our current portfolio includes disposable pressure assisted auto injection
systems (Vibex®); disposable pen injection systems and reusable needle-free injection systems.
Disposable (Vibex®) Injectors
A significant challenge beyond discovery of new molecules is how to effectively deliver them by means other
than conventional needle and syringe. The majority of these molecules have not, to date, been amenable to oral
administration due to a combination of several factors, including breakdown in the gastrointestinal tract,
fundamentally poor absorption, or high first pass liver metabolism.
9
Pressure assisted auto injection is a form of parenteral drug delivery that continues to gain acceptance among
the medical and patient community. Encompassing a wide variety of sizes and designs, this technology operates by
using pressure to force the drug, in solution or suspension, through the skin and deposits the drug into the
subcutaneous tissue. We have designed disposable, pressure assisted auto injector devices to address acute and
chronic medical needs, such as rheumatoid arthritis and psoriasis, allergic reactions, migraine headaches, acute pain
and other undisclosed therapies. Our proprietary Vibex® disposable auto injector systems combine a low-energy,
spring-based power source with a shielded needle, which delivers up to 0.5ml of the needed drug solution
subcutaneously or intramuscularly.
In order to minimize the anxiety and perceived pain associated with injection-based technologies, the Vibex®
system features a triggering collar that shields the needle from view. The patented retracting collar springs back and
locks in place as a protective needle guard after the injection, making the device safe for general disposal. In clinical
studies, this device has outperformed other delivery methods in terms of completeness of injection and user
preference, while limiting pain and bleeding. A summary of the key competitive advantages of the Vibex® system is
provided below:
Competitive Advantages of Vibex® Disposable Injectors
Rapid injection
Eliminates sharps disposal
Ease of use in emergencies
Reduces psychological barriers since the patient never sees the needle
Reliable subcutaneous or intramuscular injection
Designed around conventional pre-filled syringes
The primary goal of the Vibex® disposable pressure assisted auto injector is to provide a fast, safe, and time-
efficient method of self-injection. This device is designed around conventional single dose pre-filled syringes, which
is a primary drug container, offering ease of transition for potential pharmaceutical partners. We have signed two
license agreements with Teva for our Vibex® system. One of these agreements is for a product containing
epinephrine and the other is for sumatriptan. We also developed the Medi-Jet™ auto injector, based on the Vibex®
system, for delivery of methotrexate (OTREXUP™) for treatment of rheumatoid arthritis and psoriasis.
Our latest advancement in our proprietary line of Vibex® auto injectors is the Vibex® QS auto injector system
which offers a dose capacity of 1 mL and greater in a compact design. Vibex® QS is designed to enhance
performance on the attributes most critical to patient acceptance—speed, comfort and discretion. Vibex® QS
achieves these advancements by incorporating a novel triggering mechanism and space-saving spring configuration.
The new design also accommodates fast injection of highly-viscous drug products that stall less-powerful
conventional auto injectors. Many self-injectable biological agents currently marketed and in clinical development
are formulated to be administered in a 1 mL dose volume and tend to be of higher viscosity than non-biologic
injectable products. We are developing Vibex® QS T, based on the Vibex® QS system, for delivery of testosterone
as replacement therapy in men who have testosterone deficiency.
Disposable Pen Injector System
Our multi use, disposable pen injector complements our portfolio of single-use pressure assisted auto injector
devices. The disposable pen injector device is designed to deliver drugs by injection through needles from multi-
dose cartridges. Our disposable pen injector is designed for chronic conditions such as diabetes, which require daily
injection of a product. Depending on dose, our pens can hold up to thirty days of drug dosing. The disposable pen
is in the commercial tooling stage of development where equipment and molds are being scaled up for commercial
scale production. Although differing from the other pressure assisted injection strategies common to the above
portfolio of injection therapy, this device includes a dosing mechanism design that is drawn from our variable dose
needle-free technology. We have signed a license agreement with Teva for our pen injector device for two
undisclosed products.
10
Needle-Free Injectors
Needle-free injection combines proven delivery technology for molecules that require parenteral administration
with a device that eliminates the part of the injection that patients dislike – the needle. Improving patient comfort
through needle-free injection may increase compliance and mitigate the problem of daily injections. Needle-free
delivery eliminates the risk of needlestick injuries as well, which occur frequently in institutions in the U.S., and can
result in disease transmission to healthcare workers. One of the primary factors influencing development in the
category of needle-free injection is the inherent problematic dependence on needles. It is also recognized that greater
willingness to accept injection therapy could have a beneficial impact on disease outcomes. However, needle-free
devices may be commercially limited due to the high cost of the product and the need for consumable disposables.
Our Marketed Injection Products
OTREXUP™
OTREXUP™ is our proprietary combination product comprised of a pre-filled methotrexate syringe and our
Medi-Jet™ self-injection system designed to enable rheumatoid arthritis and psoriasis patients to self-inject
methotrexate reliably, comfortably, and conveniently at home. On October 14, 2013 we announced the approval of
OTREXUP™ (methotrexate) injection by the FDA, and in January 2014 we announced the launch of OTREXUP™.
OTREXUP™ is the first FDA approved subcutaneous methotrexate for once weekly self-administration with an
easy-to-use, single dose, disposable auto injector. OTREXUP™ is indicated for use in adults with severe active
rheumatoid arthritis or children with active polyarticular-course juvenile idiopathic rheumatoid arthritis, and adults
with severe recalcitrant psoriasis. We have worldwide marketing rights for OTREXUP™ and will commercialize
OTREXUP™ on our own in the U.S. for the treatment of RA. We have provided LEO Pharma the exclusive right
to commercialize OTREXUP™ in the U.S. for the treatment of psoriasis. Commercial sales of OTREXUP™ have
recently commenced and success of the product will be dependent on multiple factors including doctor acceptance,
third party reimbursement and patient preferences.
Zomajet® / Tjet®
The Zomajet®/Tjet® has been sold for use in more than 30 countries to deliver hGH. The product features a
reusable, spring-based power source and disposable needle-free syringe, which acts as the pathway for the injectable
drug through the skin and allows for easy viewing of the medication dose prior to injection. The device’s primary
advantages are its ease of use and lack of a needle for injection. The product is also reusable, with each device
designed to last for approximately 3,000 injections (or approximately two years) while the needle-free syringe is
disposable after approximately one week when used by a patient for injecting from multi-dose vials.
The Zomajet®/Tjet® administers injectables by using a spring to push the active ingredient in solution or
suspension through a micro-fine opening in the needle-free syringe. The opening is approximately half the diameter
of a standard 30-gauge needle. A fine liquid stream then penetrates the skin, and the dose is dispersed into the layer
of fatty, subcutaneous tissue. The drug is subsequently distributed throughout the body, successfully producing the
desired effect.
We believe this method of administration is a particularly attractive alternative to the needle and syringe for the
groups of patients described below:
Patient Candidates for Needle-Free Injection
Young adults and children
Patients looking for an alternative to needles
Patients unable to comply with a prescribed needle program
Patients transitioning from oral medication
New patients beginning an injection treatment program
Patients with metal allergies
11
The Zomajet®/Tjet® is primarily used in the U.S., Europe, Asia, Japan and elsewhere to provide a needle-free
means of administering human growth hormone to patients with growth retardation. We typically sell our injection
devices to partners in these markets who manufacture and/or market human growth hormone directly. The partners
then market our device with their growth hormone. We receive benefits from these agreements in the form of
product sales and royalties on sales of their products.
Our Marketed Transdermal Products
Our transdermal gels consist of a hydro-alcoholic base including a combination of permeation enhancers. The
gels are designed to be absorbed quickly through the skin after application, which is typically to the arms, shoulders,
or abdomen, and release the active ingredient into the blood stream predictably over approximately a 24 hour period
of time.
The following is a summary of the products on the market.
Gelnique 3%™
In December 2011, the FDA approved Gelnique 3%™ (oxybutynin gel) for the treatment of OAB. In July
2011, we entered into a licensing agreement with Actavis to commercialize Gelnique 3%™ in the U.S. and Canada.
Actavis launched the product (Gelnique 3%) in the U.S. in April 2012. Under this agreement we received payments
for certain manufacturing start-up activities, delivery of launch quantities, milestone payments and upon launch of
the product, we began receiving royalties based on net sales of both Gelnique 3%™ and their oxybutynin gel
product Gelnique® 10%. In January 2012, we entered into a licensing agreement with Daewoong Pharmaceuticals
under which Daewoong will commercialize our oxybutynin gel 3% product in South Korea, once approved. Under
this agreement we will receive milestone payments and royalties.
Elestrin®
Elestrin® is a transdermal estradiol gel for the treatment of moderate-to-severe vasomotor symptoms associated
with menopause. We licensed the rights to Elestrin® in the U.S. and other markets to ANI Pharmaceuticals (“ANI” -
formerly BioSante Pharmaceuticals) through a license agreement. ANI sublicensed Elestrin® to Azur Pharma
International II Limited (“Azur”), who was subsequently acquired by Jazz Pharmaceuticals (“Jazz”). In October
2012 Jazz divested its women’s health business including Elestrin® to Meda, which is currently marketing the
product in the U.S. We receive royalties on net sales of Elestrin® from Meda.
Research and Development
We currently perform clinical, regulatory and commercial development work primarily in our Ewing, NJ
corporate location for our own portfolio of products. Additionally, we perform parenteral device development work
primarily at our Minneapolis, MN facility. We have various products at earlier stages of development as highlighted
in our products schedule on page 2 above. Additionally, pharmaceutical partners are developing compounds using
our technology (see “Collaborative Arrangements and License Agreements”).
OTREXUP™ (methotrexate auto injector). Historically, parenteral methotrexate use has been limited in
clinical practice for several reasons including the inconvenience of weekly injections by a healthcare professional,
and/or the challenges associated with teaching patients with impaired hand function, safe and sterile self-injection
techniques. To address these issues, we developed the OTREXUP™ methotrexate system incorporating the easy-to-
use, single-use Medi-Jet™ auto injector to optimize the clinical benefit of methotrexate by allowing patients to self-
administer parenteral methotrexate conveniently at home and potentially reduce overall healthcare costs. In
December 2012, we filed a New Drug Application (NDA) for OTREXUP™ for the treatment of rheumatoid arthritis
(RA), poly-articular-course juvenile RA and psoriasis and in February 2013, the NDA was accepted for filing by the
FDA. On October 14, 2013 we announced the approval of OTREXUP™ (methotrexate) injection by the FDA, and
in January 2014 we announced the launch of OTREXUP™.
In November 2012, we announced positive results from an open-label, randomized, crossover study comparing
the systemic availability of OTREXUP™ to oral methotrexate in adult patients with rheumatoid arthritis. This study
12
was designed to compare the relative systemic availability of methotrexate following oral administration to
subcutaneous (SC) self-administered methotrexate using the Medi-Jet™ device. Patients were assigned to one of
four dose levels of methotrexate, 10 mg, 15 mg, 20 mg, and 25 mg. Results showed that the systemic availability of
methotrexate following oral dosing plateaus above 15 mg. Following administration of methotrexate with Medi-
Jet™, the systemic availability increased proportionally at every dose, which will extend the range of exposure
compared to patients receiving oral therapy.
In September 2012, we announced positive results from an Actual Human Use (AHU) study for OTREXUP™.
The clinical trial was conducted as a multi-center, open-label, single-arm, in-clinic study to evaluate the actual
human use of methotrexate administered via the Medi-Jet™ auto injector in adult patients with rheumatoid arthritis.
The study assessed the safe usability of OTREXUP™ for self-administration of parenteral methotrexate in adult RA
patients after standardized training by site personnel and review of written instructions. Secondary objectives
included evaluation of the reliability, ease of use and robustness of the Medi-Jet™; assess the safety and local
tolerance of Medi-Jet™ administered methotrexate and to evaluate the effectiveness of the patient education tools
including written instructions for use.
The AHU study consisted of three visits over nine days and included a screening period, a treatment period and
a follow-up visit. In total, 101 patients were enrolled in four study dose groups, 10 mg. (n=20), 15 mg. (n=30), 20
mg. (n=31) and 25 mg. (n=20). The single methotrexate dose was self-administered by the patient from one of the
four dose groups using the Medi-Jet™ auto injector. The results of this study showed that self-administration of
methotrexate using Medi-Jet™ was safe and well tolerated. Following standardized training by site personnel and
review of written instructions, all 101 patients performed the self-administration successfully. In addition, the Medi-
Jet™ functioned correctly and as intended for each and every administration thereby demonstrating reliability and
robustness. Results of the Ease of Use Questionnaire indicated that 98% of patients found the Medi-Jet™ easy to use
and 100% of patients found the instructions and training to be clear and easy to follow. Patients were also asked to
report site administration pain at the end of the treatment period. Administration site pain was measured using a 100
mm Visual Analog Scale (VAS) and showed that patients experienced minimal or no pain with a mean value of 3.6
mm on a scale of 100 mm. Importantly, no patients experienced treatment-emergent serious adverse events related
to the drug.
In June 2012, we announced positive results from a human factors usability study for the Medi-Jet™ auto
injector. The purpose of this study was to conduct a cumulative and summative round of simulated usability testing
of the Medi-Jet™ auto injector in accordance with Food and Drug Administration (FDA) draft guidance “Applying
Human Factors and Usability Engineering to Optimize Medical Device Design, dated June 22, 2011”. The study
design was reviewed by the FDA prior to initiation. Fifty individuals representing three user groups participated in
this study, including 17 RA patients, 16 lay caregivers and 17 healthcare professionals. All participants in the patient
group had been diagnosed with rheumatoid arthritis by a physician. In addition, the patients were screened twice
using the Health Assessment 20 Item Disability Scale (HAQ) to determine the extent of hand function impairment of
the sort associated with RA patients. Patients with an average HAQ score of 2.0 to 2.5, defined as “severe to very
severe” hand function impairment, were enrolled into the study. The RA patients and lay caregivers (n=33)
completed simulated injections on two days spaced one week apart, which is reflective of the intended weekly
dosing. The healthcare professionals (n=17) participated in a single session where they used Medi-Jet™ on a
simulated patient. The results of the study showed that the Medi-Jet™ auto injector is safe and effective for intended
users, uses and use environments. The validation testing proved the product is easy to learn and safe to use as
demonstrated by correct and successful injections.
In August 2011, we announced the positive results of a pharmacokinetic study evaluating several dose strengths
of methotrexate delivered by a healthcare professional to RA patients with the Medi-Jet™ auto injector versus the
currently approved route, intramuscular injection, using a conventional needle and syringe. The primary end points
were met with all three methods of administration providing equivalent performance in the patients studied, together
with comparable safety.
Vibex® QS and QS T (testosterone). We are developing Vibex® QS T for self-administered weekly injections
of testosterone enanthate in a preservative free formulation for clinically hypogonadal men requiring testosterone
replacement. The Vibex® QS T injector is based on our Vibex® QS auto injector system which offers a dose
capacity of 1 mL and greater in a compact design. Vibex® QS is designed to enhance performance on the attributes
13
most critical to patient acceptance—speed, comfort and discretion. Vibex® QS achieves these advancements by
incorporating a novel triggering mechanism and space-saving spring configuration. The new design also
accommodates fast injection of highly-viscous drug products, such as testosterone, that stall less-powerful
conventional auto injectors.
On December 5, 2012, we conducted a pre-IND meeting with the FDA as part of preparing to initiate clinical
development of Vibex® QS T, establishing an agreed upon clinical path forward. In September 2013, we
announced that the first patients were dosed in a clinical study evaluating the pharmacokinetic profile (“PK”) of
testosterone enanthate administered weekly by subcutaneous injection at doses of 50 mg and 100 mg via the
VIBEX® QS T auto injector device in hypogonadal adult males. The study enrolled 39 patients at nine investigative
sites in the United States. We announced our top line results of this study in a press release on February 20, 2014.
The results are considered positive in that Vibex® QS T treatment resulted in most patients achieving average levels
of testosterone within the normal range from the first dose onward. Vibex® QS T was also safe and well tolerated
by all dosed patients. We intend to begin a Phase 3 clinical study in 2014 to validate our results in a larger group of
hypogonadal men over an extended period of at-home weekly dosing.
In addition to collecting PK, efficacy and safety information, the phase 3 study will also collect Actual Human
Use experience with the device from the approximately 200 hypogonadal male patients that will receive Vibex® QS
T for home use. The study will assess the safe usability of Vibex® QS T for self-administration following
standardized training by site personnel and review of written instructions. Additional assessments will include
reliability, ease of use, robustness of Vibex® QS T, as well as an evaluation of the effectiveness of the patient
education tools, including written instructions for use.
We have also recently initiated feasibility studies with potential partners for delivery of their viscous drug
products using our Vibex® QS auto injector.
Gelnique 3%™ (Oxybutynin Gel 3%). In December 2011, the FDA approved our topical oxybutynin gel 3%
product, Gelnique 3%™, for the treatment of OAB. Our oxybutynin gel 3% is a topical, translucent hydroalcoholic
gel containing oxybutynin, an antispasmodic, antimuscarinic agent. Applied once daily to the thigh, abdomen, upper
arm or shoulder, an 84 mg (approx. 3 mL) dose delivers a consistent dose of oxybutynin through the skin over a 24-
hour period, providing significant efficacy without sacrificing tolerability. The approval of our oxybutynin gel 3%
was based on a 12-week, multi-center placebo controlled Phase 3 clinical study. Patients were randomized to either
an 84 mg (3 pumps of dispenser) or 56 mg (2 pumps of dispenser) dose application of oxybutynin gel 3% versus
placebo. The FDA approved the 84 mg dose application. Patients treated with 84 mg oxybutynin gel daily achieved
steady state drug concentrations within three days and experienced a statistically significant decrease in OAB
symptoms versus placebo, including the number of urinary incontinence episodes per week. Statistically significant
improvements in daily urinary frequency and urinary void volume were also seen with the 84 mg dose.
The product was well tolerated in the study. The most frequently reported treatment-related adverse events
(>3%) were dry mouth (12.1% versus 5% in placebo), application site erythema (3.7% versus 1.0% in placebo) and
application site rash (3.3% versus 0.5% in placebo).
In July 2011, we licensed our oxybutynin gel 3% product to Actavis for commercialization in the U.S. and
Canada. Under this agreement we received payments for certain manufacturing start-up activities, delivery of
launch quantities, and royalties on both our oxybutynin gel 3% product and their oxybutynin gel product Gelnique®
10%, and will potentially receive sales based milestone payments. In January 2012, we entered into a licensing
agreement with Daewoong Pharmaceuticals under which Daewoong will commercialize our oxybutynin gel 3%
product, once approved in South Korea. Under this agreement we will receive milestone payments and royalties.
Device Development Projects. We, along with our pharmaceutical partner Teva, are engaged in research and
development activities related to our Vibex® disposable pressure assisted auto injectors and our disposable pen
injectors. We have signed license agreements with Teva for our Vibex® system for a product containing
epinephrine and for a product containing sumatriptan as well as for our pen injector device for two undisclosed
products. Our pressure assisted auto injectors are designed to deliver drugs by injection from single dose prefilled
syringes. The disposable pen injector device is designed to deliver drugs by injection through needles from multi-
dose cartridges. The development programs consist of determination of the device design, development of prototype
14
tooling, production of prototype devices for testing and clinical studies, performance of clinical studies, and
development of commercial tooling and assembly. The following is a summary of the development stage for the
four products in development with Teva.
Vibex® with Epinephrine
We have designed the Vibex® for a product containing epinephrine and have scaled up the commercial tooling
and molds for this product. During 2013, 2012 and 2011, we received approximately $1,600,000, $850,000 and
$1,000,000, respectively, from Teva for this tooling as well as other development work for this program. In 2013,
we made initial sales to Teva of pre-launch quantities of this product totaling $6,204,000. From a regulatory
standpoint Teva filed this product as an abbreviated new drug application (“ANDA”), and the FDA accepted the
filing as such. Currently, Teva is conducting its own development work on the drug product (epinephrine). An
amendment to the ANDA is expected to be filed with the FDA in 2014 and then the FDA is expected to complete its
review of the ANDA, the timing of which is completely dependent on Teva and the FDA.
Vibex® with Sumatriptan
We had designed the Vibex® for a product containing sumatriptan and had completed the majority of the
commercial tooling and molds for the product. From a regulatory standpoint Teva filed the product as an ANDA
and the FDA rejected the filing as such. The FDA’s rejection was based primarily on the opinion that the device
was sufficiently different than the innovator’s device not to warrant an ANDA. We redesigned the device to address
the FDA’s concern of device similarity and submitted the new device to the FDA. The FDA reactivated the ANDA
file in 2010, and since that time we have been conducting user studies and scaling up commercial tooling and molds
for the newly designed device. In the fourth quarter of 2013 we received a complete response letter from the FDA
with additional items to be addressed in our filing. We plan on submitting this new data in the first half of 2014 and
then the FDA is expected to complete its review of the ANDA, the timing of which is completely dependent on the
FDA.
Disposable pen injector #1
We previously provided clinical supplies for the first pen injector product to Teva. From a regulatory
standpoint Teva has conducted a bioequivalence study for the product and determined the appropriate regulatory
pathway is a 505(b)(2). The FDA has requested additional clinical work be conducted in support of the filing. Teva
decided to redesign the pen injector for this product and we completed the process of making significant design
modifications. Teva is developing this product for both Europe and the U.S. with the European clinical/regulatory
team leading the development. Drug development and delivery of devices for a drug stability program to support a
regulatory filing is anticipated to be completed during 2014.
Disposable pen injector #2
We have designed and produced prototype pen injectors for the second pen injector product. Teva believes the
regulatory pathway for this product is an ANDA pathway. Teva has initiated drug stability and completed the
device development program and filed an ANDA with the FDA in the second half of 2013. There is also a
concurrent development program which was initiated in 2011 for this product in Europe. If the drug stability and
ANDA filing are successful, full commercial development of the device molds, tooling and automation equipment
will need to be completed during the regulatory review process.
The development timelines of the auto and pen injectors related to the Teva products are controlled by Teva.
We expect development related to the Teva products to continue in 2014, but the timing and extent of near-term
future development will be dependent on decisions made by Teva.
See Research and Development Programs in Item 7 – Management’s Discussion and Analysis of Financial
Condition and Results of Operations – for amounts spent on Company sponsored research and development
activities.
15
Manufacturing
We do not have the facilities or capabilities to commercially manufacture any of our products and product
candidates. We have no current plans to establish a manufacturing facility. We expect that we will be dependent to a
significant extent on contract manufacturers for commercial scale manufacturing of our product candidates in
accordance with regulatory standards. Contract manufacturers may utilize their own technology, technology
developed by us, or technology acquired or licensed from third parties. When contract manufacturers develop
proprietary process technology, our reliance on such contract manufacturers is increased. Technology transfer from
the original contract manufacturer may be required. Any such technology transfer may also require transfer of
requisite data for regulatory purposes, including information contained in a proprietary drug master file (“DMF”)
held by a contract manufacturer. FDA approval of the new manufacturer and manufacturing site would also be
required.
We are responsible for U.S. device manufacturing in compliance with current Quality System Regulations
(“QSR”) established by the FDA and by the centralized European regulatory authority (Medical Device Directive).
Injector and disposable parts are manufactured by third-party suppliers. Assembly and packaging of all of our
products, including our needle-free device for all of our partners and OTREXUP™, is performed by third-party
suppliers under our direction. Product release is performed by us. We operate under a manufacturing agreement
with Minnesota Rubber and Plastics (“MRP”), a contract manufacturing company, who manufactures and assembles
our needle-free devices and certain related disposable component parts for our partners Teva, Ferring and JCR. We
have contracted with Phillips-Medisize Corporation, an international outsource provider of design and
manufacturing services, to produce clinical and commercial quantities of our Vibex® QS T auto injector device and
our pen injector device for an undisclosed Teva product. We have contracted with Nypro Inc. (“Nypro”), an
international manufacturing development company to supply commercial quantities of our Vibex® pressure assisted
auto injector device in compliance with FDA QSR regulations for our OTREXUP™ and Vibex® epinephrine
products. We have contracted with Uman Pharma (Montreal, Canada) to supply commercial quantities of
methotrexate pre-filled syringes for the U.S and Canadian markets for OTREXUP™. We have contracted with
Sharp Corporation (“Sharp”), an international contract packaging company, to assemble and package OTREXUP™.
We are currently working on qualifying a backup supplier for the pre-filled syringes of methotrexate, an additional
supplier of the raw material of methotrexate and currently have an additional approved site for the naked pre-filled
syringes. All of our pharmaceutical manufacturing and packaging suppliers are subject to compliance with Current
Good Manufacturing Practices (“cGMP”).
Distribution
In connection with the launch of OTREXUP™ we have contracted with a third-party logistics provider,
Cardinal Health 105, Inc. (a/k/a Specialty Pharmaceutical Services), for key services related to logistics,
warehousing and inventory management, distribution, contract administration and chargeback processing, accounts
receivable management and call center management. In addition, we will utilize third parties to perform various
other services for us relating to sample accountability and regulatory monitoring, including adverse event reporting,
safety database management and other product maintenance services.
Trade
In connection with the launch of OTREXUP™ we have contracted with numerous wholesale distributors such
as McKesson, Cardinal and Amerisource Bergen to distribute our OTREXUP™ product to the retail pharmacies as
well as the Veterans Administration (VA) and other governmental agencies. In addition to shipping our product, the
major distributors will provide inventory and sales reports as well as other services. In exchange for these services
we pay fees to certain distributors based on a percentage of wholesale acquisition cost (WAC).
Third Party Reimbursement and Pricing
In both U.S. and foreign markets, our ability to commercialize OTREXUP™ successfully depends in significant
part on the availability of adequate coverage and reimbursement from third-party payers, including, in the U.S.,
government payers such as the Medicare and Medicaid programs, managed care organizations and private health
insurers. Third-party payers are increasingly challenging the prices charged for medicines and examining their cost
16
effectiveness, in addition to their safety and efficacy. This is especially true in markets where generic options exist.
Third-party payers may use tiered reimbursement which may adversely affect demand for OTREXUP™ by placing
it in a more expensive patient co-payment tier. We cannot be certain that OTREXUP™ will successfully be placed
on the list of drugs covered by particular health plan formularies. Many states have also created preferred drug lists
and include drugs on those lists only when the manufacturers agree to pay a supplemental rebate. If OTREXUP™ is
not included on these preferred drug lists, physicians may not be inclined to prescribe it to their Medicaid patients,
thereby diminishing the potential market for OTREXUP™.
We may need to conduct pharmacoeconomic studies to demonstrate the cost effectiveness of OTREXUP™ for
formulary coverage and reimbursement. Even with studies, OTREXUP™ may be considered less safe, less effective
or less cost-effective than existing products, and third-party payers may not provide coverage and reimbursement for
OTREXUP™, in whole or in part. Political, economic and regulatory influences are subjecting the healthcare
industry in the U.S. to fundamental changes. There have been, and we expect there will continue to be, legislative
and regulatory proposals to change the healthcare system in ways that could significantly affect our future business.
For example, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education
Affordability Reconciliation Act, or collectively the PPACA, enacted in March 2010, substantially changed the way
healthcare is financed by both governmental and private insurers. Among other cost containment measures, PPACA
establishes:
an annual, nondeductible fee on any entity that manufactures or imports certain branded prescription drugs
and biologic agents;
a new Medicare Part D coverage gap discount program, in which pharmaceutical manufacturers who wish
to have their drugs covered under Part D must offer discounts to eligible beneficiaries during their coverage
gap period (the "donut hole"); and
a new formula that increases the rebates a manufacturer must pay under the Medicaid Drug Rebate
Program.
In the future, there may continue to be additional proposals relating to the reform of the U.S. healthcare system.
Certain of these proposals could limit the prices we are able to charge for OTREXUP™ or the amounts of
reimbursement available for OTREXUP™, and could limit the acceptance and availability of OTREXUP™. The
adoption of some or all of these proposals could materially impact numerous aspects of our business.
Our partnered products encounter the same issues with reimbursement stated above. Although we do not
control the reimbursement rate or discounts contracted with third party payers by our partners, it ultimately affects
our royalty payments on products such as Tev-Tropin® and Gelnique®. We have encountered a widening gap
between gross sales and net sales after discounts on both of these products which has negatively affected our royalty
revenue.
Sales and Marketing
OTREXUP™
On October 14, 2013 we announced the approval of OTREXUP™ (methotrexate) injection by the FDA, and in
January 2014 we announced the launch of OTREXUP™. We have worldwide marketing rights for OTREXUP™
and will commercialize OTREXUP™ on our own in the U.S. for the treatment of RA. We have been building an
internal sales and marketing organization, and have entered into agreements with a contract sales organization and
other vendors for commercialization services such as third party contracting and distribution. We have a contracted
field force comprised initially of approximately 25 sales representatives and three district managers to market the
product in the U.S. to key rheumatology specialists. We have also contracted for six medical science liaisons who
interface with the physician on a scientific level. We have provided LEO Pharma the exclusive right to
commercialize OTREXUP™ in the U.S. for the treatment of psoriasis. We intend to enter into licensing or
additional distribution arrangements for commercialization of our products outside the U.S. As part of our longer-
term strategy, we anticipate we will further develop our product candidates and selectively license or acquire
additional products and/or late stage product candidates that are synergistic with our commercial strategy.
17
Partnered Products
During 2013, 2012 and 2011, international revenue accounted for approximately 20%, 25% and 38%,
respectively, of total revenue. Europe accounted for 94%, 88% and 93% of international revenue in 2013, 2012 and
2011, respectively, with the remainder coming primarily from Asia. Teva accounted for 66%, 33% and 50% of our
worldwide revenues in 2013, 2012 and 2011, respectively, Ferring accounted for 19%, 22% and 35% of our
worldwide revenues in 2013, 2012 and 2011, respectively, and Actavis accounted for 7% and 30% of our worldwide
revenues in 2013 and 2012, respectively. Revenue from Teva and Ferring resulted from sales of injection devices
and disposable components for their hGH formulations, and related royalties. Revenue from Teva also included
development and product revenue related to license agreements with Teva for our Vibex® system and for our pen
injector device. Revenue from Actavis in 2013 resulted from Gelnique 3% product sales and royalties, and in 2012
resulted from Gelnique 3% product sales, manufacturing start-up and other development activities, royalties and a
milestone payment that was recognized in 2012. Product sales to Actavis ended in the first quarter of 2013, as
Actavis assumed all manufacturing of Gelnique 3% in 2013 as contracted.
See Results of Operations – Revenues in Part II, Item 7 – Management’s Discussion and Analysis of Financial
Condition and Results of Operations – for a discussion of our products and services revenues and Note 10 to the
Consolidated Financial Statements for revenues by geographic area.
Collaborative Arrangements and License Agreements
The following table describes existing pharmaceutical and device relationships and license agreements:
Partner
Ferring
Ferring
Teva
JCR
Teva
Teva
Teva
Teva
Actavis
Daewoong
Meda
Drug
hGH (Zomacton®)
(4mg formulation)
hGH (Zomacton®)
(10 mg formulation)
hGH (Tev-Tropin®) 5mg
hGH
Epinephrine
Sumatriptan
Undisclosed
Product #1
Undisclosed
Product #2
Oxybutynin
Oxybutynin
Estradiol
Pfizer
Population Council
Ferring
LEO Pharma
Undisclosed
Nestorone®/Estradiol
Undisclosed
Methotrexate
Market Segment
Growth Retardation
(U.S., Europe, Asia & Pacific)
Growth Retardation
(U.S., Europe, Asia & Pacific)
Growth Retardation (United States)
Growth Retardation (Japan)
Anaphylaxis (U.S. and Canada)
Migraines (U.S. and Canada)
Undisclosed
(North America, Europe & others)
Undisclosed
(North America, Europe & others)
U.S. and Canada
South Korea
Hormone replacement therapy
(North America, other countries)
Consumer Health
Contraception (Worldwide)
Undisclosed (Worldwide)
Dermatology (U.S.)
Product
Needle Free
Zomajet® 2 Vision
Needle Free
Zomajet® Vision X
Needle Free Tjet®
Needle Free Twin-Jector® EZ II
Vibex® Auto Injector
Vibex® Auto Injector
Pen Injector
Pen Injector
Gelnique 3%
Oxybutynin Gel 3%
Elestrin® Gel
Undisclosed
Nestragel™
Transdermal Gel
OTREXUP™
The table above summarizes agreements under which our partners are selling products, conducting clinical
evaluation, and performing development of our products. For competitive reasons, our partners may not divulge
their name, the product name or the exact stage of clinical development.
In June 2000, we granted an exclusive license to ANI to develop and commercialize four of our gel technology
products for use in hormone replacement therapy in North America and other countries. ANI paid us an upfront
payment upon execution of the agreement and is also required to make royalty payments once commercial sales of
the products have begun. The royalty payments are based on a percentage of sales of the products and must be paid
for a period of 10 years following the first commercial sale of the products, or when the last patent for the products
expires, whichever is later. The agreement also provides for milestone payments to us upon the occurrence of certain
events related to regulatory filings and approvals. In November 2006, ANI entered into a sublicense and marketing
agreement with Bradley Pharmaceuticals, Inc. (“Bradley”) for Elestrin®. In December 2006, the FDA approved
18
Elestrin® for marketing in the United States. Bradley was acquired by Nycomed Inc. in February 2008 and returned
Elestrin® to ANI. In December 2008, Elestrin® was sublicensed to Azur and subsequently relaunched in 2009. In
January 2012, Azur was acquired by Jazz. In October 2012, Jazz’ women’s health business, including Elestrin®, was
acquired by Meda. We receive royalties on sales of Elestrin® as well as potential sales-based milestone payments.
Currently we expect that Elestrin® will be the only product developed under this license agreement.
In January 2003, we entered into a revised License Agreement with Ferring, under which we licensed certain of
our intellectual property and extended the territories available to Ferring for use of certain of our reusable needle-
free injection devices to include all countries and territories in the world except Asia/Pacific. Specifically, we
granted to Ferring an exclusive, royalty-bearing license, within a prescribed manufacturing territory, to utilize
certain of our reusable needle-free injector devices for the field of hGH until the expiration of the last to expire of
the patents in any country in the territory. We granted to Ferring similar non-exclusive rights outside of the
prescribed manufacturing territory. In 2007, we amended this agreement providing for non-exclusive rights in Asia
along with other changes to financial terms of the agreement. We receive a purchase price and a royalty for each
device sold to Ferring and a royalty on their hGH sales if we meet certain product quality metrics.
We have an agreement with JCR through 2014 under which they will continue to market our needle free
injector in Japan for use with their hGH product Growject®. We receive a negotiated purchase price for each device
sold, as well as royalties on JCR’s net sales of hGH.
In July 2006, we entered into an exclusive License Development and Supply Agreement with Teva. Pursuant to
the agreement; Teva is obligated to purchase all of its delivery device requirements from us for an epinephrine auto
injector product to be marketed in the United States and Canada. We received an upfront cash payment, and will
receive a negotiated purchase price for each device sold, as well as royalties on sales of their product. This
agreement has been amended numerous times and provides for payment of capital equipment and other development
work that was outside the scope of the original agreement. The agreement will continue until the later of July 2016
or the expiration of the last to expire patent that is filed no later than 12 months after FDA approval.
In July 2006, we entered into a joint development agreement with the Population Council, an international, non-
profit research organization, to develop contraceptive formulation products containing Nestorone®, by using the
Population Council’s patented compound and other proprietary information covering the compound, and our
transdermal delivery gel. Under the terms of the joint development agreement, we are responsible for research and
development activities as they relate to the gel. The Population Council will be responsible for clinical trial design
development and management. Together, we are looking for a worldwide or regional commercial development
partner to complete the clinical program for this potential product. The term of the agreement is perpetual unless
mutually terminated.
In September 2006, we entered into a Supply Agreement with Teva. Pursuant to the agreement, Teva is
obligated to purchase all of its delivery device requirements from us for hGH marketed in the United States. We
received an upfront cash payment and have received milestone fees and royalty payments on Teva’s net sales of
hGH, as well as a purchase price for each device sold. The original term of this agreement extended through
September 2013. In May 2013 the agreement was amended to provide for one year automatic renewals unless
terminated by either party six months ahead of the expiring term.
In December 2007, we entered into a license, development and supply agreement with Teva under which we
will develop and supply a disposable pen injector for use with two undisclosed patient-administered pharmaceutical
products. Under the agreement, an upfront payment, development milestones, and royalties on product sales are to
be received by us under certain circumstances. In January 2011, this agreement was amended to provide payments
to us for capital equipment and other development work. In 2013, 2012 and 2011, statements of work in connection
with continued development of these two products were agreed upon, providing additional payments to us. This
agreement will continue until the later of December 2017 or the expiration date of the last to expire patent covering
the device or product that is filed no later than 12 months after FDA approval, and will be automatically renewed for
successive periods of two years each.
In November 2009 we entered into a license agreement with Ferring under which we licensed certain of our
patents and agreed to transfer know-how for our transdermal gel technology for certain pharmaceutical products.
19
Under this agreement, we received an upfront payment, milestone payments and will receive additional milestone
payments as certain defined product development milestones are achieved. The agreement is effective until the last
to expire patent.
In July 2011, we entered into a licensing agreement with Actavis (formerly Watson) under which Actavis will
commercialize our oxybutynin gel 3% product in the U.S. and Canada. Under this agreement we received payments
for certain manufacturing start-up activities, delivery of launch quantities, and royalties on both our oxybutynin gel
3% product and their oxybutynin gel product Gelnique® 10%, and will potentially receive sales based milestone
payments. The term of the agreement ends on the later of April 2024 or the expiration date of the last to expire
patent.
In December 2011, we entered into a licensing agreement with Pfizer Consumer Healthcare (“Pfizer”) for one
of our drug delivery technologies to develop an undisclosed product on an exclusive basis for North America. Pfizer
will assume full cost and responsibility for all clinical development, manufacturing, and commercialization of the
product in the licensed territory, which also includes certain non-exclusive territories outside of North America. We
will receive undisclosed upfront payments, development milestones and sales based milestones, as well as royalties
on net sales for three years post launch in the U.S.
In January 2012, we entered into a licensing agreement with Daewoong Pharmaceuticals under which
Daewoong will commercialize our oxybutynin gel 3% product in South Korea, once approved. The agreement
terms include an upfront payment, development and sales-based milestone payments and escalating royalties based
on product sales in South Korea. The term of the agreement ends on the later of fifteen years following launch of
the product or the expiration date of the last to expire patent.
In November 2012, we entered into a license, supply and distribution agreement with Teva for an auto injector
product containing sumatriptan for the treatment of migraines. We will manufacture the device and do final
assembly and packaging of the final product, and Teva will manufacture and supply the drug and will distribute the
product in the United States. Teva also received an option for rights in other territories. Under the agreement, we
received an upfront payment and will receive a milestone payment upon commercial launch. In addition, net profits
will be split 50/50 between us and Teva. The term of the agreement is seven years from commercial launch, with
automatic one year renewals unless terminated by either party after the initial term.
In November 2013, we entered into a promotion and license agreement with LEO Pharma. Under this
agreement we granted LEO Pharma the exclusive right to promote OTREXUP™ to dermatologists for symptomatic
control of severe recalcitrant psoriasis in adults in the U.S. LEO Pharma is responsible for promotion and marketing
activities in dermatology and we are responsible for the supply of OTREXUP™ product and samples. We received
from LEO Pharma a non-refundable upfront payment of $5.0 million and received a second milestone payment of
$5.0 million upon launch of the product and meeting other performance obligations in March 2014. Additionally,
we may receive a $10.0 million milestone payment upon realizing a defined level of net sales in a calendar year.
The Company will pay LEO Pharma a percentage of net sales generated in dermatology as evidenced by psoriasis
prescriptions.
Competition
Competition in the methotrexate market includes tablets and parenteral forms that are currently marketed in the
U.S. by several generic manufacturers, including Teva, Mylan, Roxane, Bedford Labs, APP Pharmaceuticals, and
Hospira. In several European countries, Canada, and South Korea, Medac International or its licensees market
methotrexate in prefilled syringes (Metoject®) and in 2013 launched an auto injector with methotrexate in those
territories. On January 27, 2014, Medac Pharma Inc. (“Medac Pharma”), a privately held pharmaceutical company,
announced FDA acceptance of a New Drug Application for their lead product candidate MPI-2505, a subcutaneous
injectable methotrexate in a ready-to-use injection device for potential use in the treatment of rheumatoid arthritis,
poly-articular course juvenile arthritis and psoriasis. If approved, Medac Pharma is targeting the potential
commercialization of this product candidate in late 2014. Other commonly used pharmaceutical treatments for
rheumatoid arthritis include analgesics, non-steroidal anti-inflammatory drugs (NSAIDs), corticosteroids, so-called
disease modifying anti-rheumatic drugs (DMARDs) and biologic response modifiers. In addition to methotrexate,
the DMARDs include azathioprine (Imuran®), cyclosporine (Neoral®), hydroxychloroquine (Plaquenil®), auranofin
20
(Ridura®), leflunomide (Arava®) and sulfasalazine (Azulfidine®). The biologic response modifiers include
etanercept (Enbrel®), adalimumab (Humira®), golimumab (Simponi®), tocilizumab (Actemra®), certolizumab
(Cimzia®), infliximab (Remicaid®), abatacept (Orencia®), and rituximab (Rituxan®). They are often prescribed in
combination with DMARDs such as methotrexate. Because biologics work by suppressing the immune system, they
could be problematic for patients who are potentially prone to frequent infection.
Competition in the U.S. testosterone replacement market includes Abbvie’s Androgel® and Androgel® 1.62%,
Lilly’s Axiron®, Endo Pharmaceuticals’ Fortesta® and Delatestryl®, Pfizer’s Depo®-Testosterone, Actavis’
Androderm®, Auxillium’s Testim®, Actient’s Striant® and Testopel® and several generic testosterone in oil products
sold by Actavis, Sandoz, Mylan, Bedford Labs, Teva and others. In addition, at least two additional treatments for
low testosterone levels are in development. Clarus Therapeutics is developing an oral formulation of testosterone
undecanoate, CLR-610, announcing positive Phase III clinical study results in September 2012. Trimel
Pharmaceuticals is developing an intra-nasal testosterone formulation, CompleoTRT™, submitting an NDA with the
FDA in April 2013 that now has a PDUFA date recently extended to May 28, 2014. Endo Pharmaceuticals has
recently received U.S. FDA approval of testosterone undecanoate injection, Aveed™. Endo Pharmaceuticals
licensed testosterone undecanoate injection from Bayer, which markets the product as Nebido® in Europe and
elsewhere. Endo Pharmaceuticals has not yet launched this product.
Competition in the U.S. OAB market includes Pfizer’s Detrol® LA (tolterodine extended release capsules),
Janssen Pharmaceutical’s Ditropan® XL (oxybutynin extended release tablets) and generic forms of oxybutynin
tablets, GSK/Astellas’ Vesicare® (sofenicin tablets) (17%), Warner Chilcott’s Enablex® (darifenacin extended
release tablets), Pfizer’s Toviaz® (fesoteridine tablets), Allergan’s Sanctura XR® (tropsium extended release
capsules), Astellas Pharma’s Myrbetriq® (mirabegron extended release tablets), Actavis’ transdermal oxybutynin
patch Oxytrol® and Allergan’s Botox® (onabotulinumtoxinA).
Competition in the hGH market consists of products from several manufacturers, including Humatrope (Lilly),
Norditropin (NovoNordisk), Genotropin (Pfizer), Nutropin (Roche/Genentech), Omnitrope (Sandoz), Serostim
(EMD Serono), Saizen (EMD Serono), Zorptive (EMD Serono), and Tev-Tropin (Teva). While all hGH products
currently available in the United States are exclusively produced from recombinant technology in the form of
somatropin, individual hGH products vary in the indications for which they are approved, the formulations (ready-
to-use liquids and lyophyllized powder for reconstitution), strengths, and drug delivery systems (e.g., vials for use
with conventional needle and syringe, pre-filled syringes, pens, needle-free auto-injectors) in which they are
available. Approved indications include growth hormone deficiency in children, Turner’s syndrome, Prader-Willi
syndrome, Noonan syndrome, small for gestational age (SGA), growth delay in children with chronic renal failure
and SHOX (short stature homeobox-containing gene) gene deletion. Approved indications in adults includes growth
hormone deficiency in adults, continuation of therapy from growth hormone deficiency in childhood, treatment of
AIDS wasting, and treatment of short bowel syndrome. Different manufacturers’ hGH products may or may not be
approved for one or more of the indicated uses, which, along with differences in formulation, available strengths,
drug delivery devices, promotional activities, and price discounts and rebates all combine to form a highly complex
and competitive hGH market.
Competition in the hormone replacement market consists of products from several manufacturers, including
Premarin tablets (Pfizer), Premarin vaginal cream (Pfizer), Vagifem (NovoNordisk), Estrace (Warner-Chilcott),
Vivelle-Dot (Novartis), Estradiol Transdermal System (Mylan), Climara (Bayer). Our gel product Elestrin is
competing against oral tablets, vaginal creams and transdermal patches, which together make up nearly 97% of the
U.S. market for hormone replacement therapy.
Competition in the disposable, single-use injector market includes, but is not limited to, Ypsomed AG, SHL
Group AB, OwenMumford Ltd., West Pharmaceuticals, Becton Dickinson, Haselmeir GmbH, Elcam Medical and
Vetter Pharma, while competition in the reusable needle-free injector market includes Bioject Medical Technologies
Inc. and The Medical House PLC. Additionally, in the drug injection field we face competition from internal groups
within large pharmaceutical companies as well as design houses which complete the design of devices for
companies but don’t have manufacturing management capabilities.
Competition in the injectable drug delivery market is intensifying. We face competition from traditional needles
and syringes as well as newer pen-like and sheathed needle syringes and other injection systems as well as
21
alternative drug delivery methods including oral, transdermal and pulmonary delivery systems. Nevertheless, the
majority of injections are still currently administered using needles. Because injections are typically only used when
other drug delivery methods are not feasible, the auto injector systems may be made obsolete by the development or
introduction of drugs or drug delivery methods which do not require injection for the treatment of conditions we
have currently targeted. In addition, because we intend to, at least in part, enter into collaborative arrangements with
pharmaceutical companies, our competitive position will depend upon the competitive position of the
pharmaceutical company with which we collaborate for each drug application.
Industry Trends
Based upon our experience in the healthcare industry, we believe the following significant trends in healthcare
have important implications for the growth of our business.
Major pharmaceutical companies market directly to consumers and encourage the use of innovative, user-
friendly drug delivery systems, offering patients an ability to self-inject products at home. We believe the patient-
friendly attributes of our injection technologies meet these market needs.
Many drugs, including selected protein biopharmaceuticals, are degraded in the gastrointestinal tract and may
only be administered through the skin by injection. Injection therefore remains the mainstay of protein delivery. The
growing number of protein biopharmaceuticals requiring injection may have limited commercial potential if patient
compliance with conventional injection treatment is not optimal. The failure to take all prescribed injections can lead
to increased health complications for the patient, decreased drug sales for pharmaceutical companies and increased
healthcare costs for society. In addition, it is becoming increasingly recognized that conventional needles and
syringes are inherently unreliable and require special and often costly disposal methods. Industry expectations are
that improvements in protein delivery methods such as our injector systems will continue to be accepted by the
market. In addition to the increase in the number of drugs requiring self-injection, recommended changes in the
frequency of injections may contribute to an increase in the number of self-injections.
In March 2010, Congress passed the “Biologics Price Competition and Innovation Act” as part of the “Patient
Protection and Affordable Care Act.” This legislation creates a pathway for regulatory approval, authorizing the
FDA to establish criteria for review and approval of “biosimilar” and “interchangeable” biological products that are
similar to the innovator biologic after patent and exclusivity expiration of the innovator product. The approval of
biosimilar products is intended to reduce the cost of biological products by increasing competition just as the Hatch-
Waxman legislation did by creating an abbreviated pathway for approval of generic drugs. In order to differentiate
between different versions of similar biologic agents, novel patented delivery systems are becoming more important
to extend product proprietary position as well as secure patient preference.
Furthermore, patented pharmaceutical products continue to be challenged by generic companies once
substantial proprietary sales are generated. All of our proprietary device systems may provide pharmaceutical
companies with the ability to protect and extend the life of a product.
When a drug loses patent protection, the branded version of the drug typically faces competition from generic
alternatives. It may be possible to preserve market share by altering the delivery method. We expect branded and
specialty pharmaceutical companies will continue to seek differentiating device characteristics to defend against
generic competition and to optimize convenience to patients. The new device may offer therapeutic advantages,
convenience or improved dosing schedules. Major pharmaceutical companies now focus on life cycle management
of their products to maximize return on investment and often consider phased product improvement opportunities to
maintain competitiveness.
Recently a trend has emerged where companies are now focusing on “branded generics” wherein an established
drug is coupled with a device technology in order to improve the drug utility to the patient or improve the ease of
use of an injectable drug. This concept is the basis of our OTREXUP™ and Vibex® QS T products and potentially
provides the pharmaceutical company a high value branded product.
Finally, our device platforms work well in the generic marketplace, the opposite end of the branded strategy.
There are a large number of injectable branded products losing patent protection in the near term which will be or
22
have been subject to the Abbreviated New Drug Application (“ANDA”) pathway. Three of our potential products
with our partner Teva (Epinephrine, Sumatriptan and an undisclosed product in our pen technology) are being
developed as generic substitutes to the branded products. Unlike branded products which need to be detailed to a
physician by a sales force, a generic product with an AB rating is substituted at the pharmacy in lieu of the branded
product affording a potentially low cost, high penetration generic product. Our device platform allows for device
customization which can provide multiple opportunities in the generic market space.
Seasonality of Business
We do not believe our business, either device or pharmaceutical, is subject to seasonality. We are subject to and
affected by the business practices of our pharmaceutical/device partners. Inventory practices, such as safety stock
levels, of our partners may subject us to product sales fluctuations quarter to quarter or year over year. Additionally,
development revenue we derive from our partners is subject to fluctuation based on the number of programs being
conducted by our partners as well as delays or lack of funding for those programs.
Proprietary Rights
When appropriate, we actively seek protection for our products and proprietary information by means of U.S.
and international patents and trademarks. We currently hold numerous patents and numerous additional patent
applications pending in the U.S. and other countries. Our patents have expiration dates ranging from 2015 to 2031.
In addition to issued patents and patent applications, we are also protected by trade secrets in all of our technologies.
Some of our technology is developed on our behalf by independent outside contractors. To protect the rights of
our proprietary know-how and technology, Company policy requires all employees and consultants with access to
proprietary information to execute confidentiality agreements prohibiting the disclosure of confidential information
to anyone outside the Company. These agreements also require disclosure and assignment to us of discoveries and
inventions made by such individuals while devoted to Company-sponsored activities. Companies with which we
have entered into development agreements have the right to certain technology developed in connection with such
agreements.
Government Regulation
Any potential products discovered, developed and manufactured by us or our collaborative partners must
comply with comprehensive regulation by the FDA in the United States and by comparable authorities in other
countries. These national agencies and other federal, state, and local entities regulate, among other things, the pre-
clinical and clinical testing, safety, effectiveness, approval, manufacturing operations, quality, labeling, distribution,
marketing, export, storage, record keeping, event reporting, advertising and promotion of pharmaceutical products
and medical devices. Facilities and certain company records are also subject to inspections by the FDA and
comparable authorities or their representatives. The FDA has broad discretion in enforcing the Federal Food, Drug
and Cosmetic Act (“FD&C Act”) and the regulations thereunder, and noncompliance can result in a variety of
regulatory enforcement actions ranging from warning letters, product detentions, device alerts or field corrections to
mandatory recalls, seizures, manufacturing shut downs, quarantines, injunctive actions and civil or criminal actions
or penalties.
Drug Approval Process
Pharmaceutical based products or drug delivery technologies indicated for the treatment of systemic or local
treatments respectively are regulated by the FDA in the U.S. and other similar regulatory agencies in other countries
as drug products. Drug delivery based products are considered to be controlled release dosage forms and may not be
marketed in the U.S. until they have been demonstrated to be safe and effective. The regulatory approval routes for
products include the filing of an NDA for new drugs, new indications of approved drugs or new dosage forms of
approved drugs. Alternatively, these dosage forms can obtain marketing approval as a filing under Section 505(b)(2)
of the FD&C Act where there is an acceptable reference or as a generic product by the filing of an ANDA, providing
the new generic product is bioequivalent to and has the same labeling as a comparable approved product. The
combination of the drug, its dosage form and label claims, and differences, if any, from the reference product and
FDA requirements will ultimately determine which regulatory approval route will be required.
23
The process required by the FDA before a new drug (pharmaceutical product) or a new route of administration
of a pharmaceutical product may be approved for marketing in the United States generally involves:
pre-clinical laboratory and animal tests;
submission to the FDA of an IND application, which must be in effect before clinical trials may begin;
adequate and well controlled human clinical trials to establish the safety and efficacy of the drug for its
intended indication(s);
FDA compliance inspection and/or clearance of all manufacturers and facilities;
submission to the FDA of an NDA; and
FDA review of the NDA or product license application in order to determine, among other things, whether
the drug is safe and effective for its intended uses.
Pre-clinical tests include laboratory evaluation of product chemistry and formulation, as well as animal studies,
to assess the potential safety and efficacy of the product. Certain pre-clinical tests must comply with FDA
regulations regarding current good laboratory practices. The results of the pre-clinical tests are submitted to the FDA
as part of an IND, to support human clinical trials and are reviewed by the FDA, with patient safety as the primary
objective, prior to the IND commencement of human clinical trials.
Clinical trials are conducted according to protocols that detail matters such as a description of the condition to
be treated, the objectives of the study, a description of the patient population eligible for the study and the
parameters to be used to monitor safety and efficacy. Each protocol must be submitted to the FDA as part of the
IND. Protocols must be conducted in accordance with FDA regulations concerning good clinical practices to ensure
the quality and integrity of clinical trial results and data. Failure to adhere to good clinical practices and the
protocols may result in FDA rejection of clinical trial results and data, and may delay or prevent the FDA from
approving the drug for commercial use.
Clinical trials are typically conducted in three sequential Phases, which may overlap. During Phase I, when the
drug is initially given to human subjects, the product is tested for safety, dosage tolerance, absorption, distribution,
metabolism and excretion. Phase I studies are often conducted with healthy volunteers depending on the drug being
tested. Phase II involves studies in a limited patient population, typically patients with the conditions needing
treatment, to evaluate preliminarily the efficacy of the product for specific, targeted indications; determine dosage
tolerance and optimal dosage; and identify possible adverse effects and safety risks.
Pivotal or Phase III adequate and well-controlled trials are undertaken in order to evaluate efficacy and safety in
a comprehensive fashion within an expanded patient population for the purpose of registering the new drug. The
FDA may suspend or terminate clinical trials at any point in this process if it concludes that patients are being
exposed to an unacceptable health risk or if they decide it is unethical to continue the study. Results of pre-clinical
and clinical trials must be summarized in comprehensive reports for the FDA. In addition, the results of Phase III
studies are subject to rigorous statistical analyses. This data may be presented in accordance with the guidelines for
the International Committee of Harmonization that can facilitate registration in the United States, the EU and Japan.
FDA approval of our own and our collaborators’ products is required before the products may be
commercialized in the United States. FDA approval of an NDA will be based, among other factors, on the
comprehensive reporting of clinical data, risk/benefit analysis, animal studies and manufacturing processes and
facilities. The process of obtaining NDA approvals from the FDA can be costly and time consuming and may be
affected by unanticipated delays.
An sNDA is a submission to an existing NDA that provides for changes to the NDA and therefore requires
FDA approval. Changes to the NDA that require FDA approval relate to the active ingredients, the drug product
and/or the labeling, or significant manufacturing changes. A supplement is required to fully describe the change.
Both before and after market approval is obtained, a product, its manufacturer and the holder of the NDA for
the product, are subject to comprehensive regulatory oversight. Violations of regulatory requirements at any stage,
including after approval, may result in various adverse consequences, including the FDA’s delay in approving or
refusal to approve a product, withdrawal of an approved product from the market and the imposition of criminal
penalties against the manufacturer and NDA holder. In addition, later discovery of previously unknown problems
24
may result in restrictions on the product, manufacturer or NDA holder, including withdrawal of the product from the
market. Furthermore, new government requirements may be established that could delay or prevent regulatory
approval of our products under development.
FDA approval is required before a generic drug equivalent can be marketed. We seek approval for such
products by submitting an ANDA or 505(b)(2) to the FDA. When processing an ANDA, the FDA waives the
requirement of conducting complete clinical studies, although it normally requires bioavailability and/or
bioequivalence studies. “Bioavailability” indicates the extent of absorption of a drug product in the blood stream.
“Bioequivalence” indicates that the active drug substance that is the subject of the ANDA submission is equivalent
to the previously approved drug. An ANDA may be submitted for a drug on the basis that it is the equivalent of a
previously approved drug or, in the case of a new dosage form, is suitable for use for the indications specified.
The timing of final FDA approval of an ANDA depends on a variety of factors, including whether the applicant
challenges any listed patents for the drug and whether the brand-name manufacturer is entitled to one or more
statutory exclusivity periods, during which the FDA may be prohibited from accepting applications for, or
approving, generic products. In certain circumstances, a regulatory exclusivity period can extend beyond the life of a
patent, and thus block ANDAs from being approved on the patent expiration date. For example, in certain
circumstances the FDA may extend the exclusivity of a product by six months past the date of patent expiry if the
manufacturer undertakes studies on the effect of their product in children, a so-called pediatric extension.
Before approving a product, either through the NDA or ANDA route, the FDA also requires that our procedures
and operations or those of our contracted manufacturer conform to cGMP regulations, relating to good
manufacturing practices as defined in the U.S. Code of Federal Regulations. We and our contracted manufacturer
must follow the cGMP regulations at all times during the manufacture of our products. We will continue to spend
significant time, money and effort in the areas of production and quality testing to help ensure full compliance with
cGMP regulations and continued marketing of our products now or in the future. New track and trace requirements
will also become effective in January 2015, and will require new systems to track the distribution of drug products.
If the FDA believes a company is not in compliance with cGMP, sanctions may be imposed upon that company
including:
withholding from the company new drug approvals as well as approvals for supplemental changes to
existing applications;
preventing the company from receiving the necessary export licenses to export its products; and
classifying the company as an “unacceptable supplier” and thereby disqualifying the company from selling
products to federal agencies.
Our products, such as OTREXUP™, or products marketed by our partners, such as Gelnique 3%™ (oxybutynin
gel 3%) and Elestrin®, as well as our products being developed by our partners such as Nestragel™ and the
undisclosed Pfizer product are subject to the above regulations. Device combination products developed by us, such
as OTREXUP™ or Vibex® QS T, and being developed by our partner Teva are subject to the NDA, ANDA, sNDA,
sANDA and 505(b)(2) regulations cited above, as well as the device approval process below.
Device Approval Process
Drug delivery systems such as our injectors can also be evaluated as part of the drug approval process such as
an NDA, sNDA, ANDA, 505(b)(2) or a Biologic Product License Application (“BLA”). Combination drug/device
products raise unique scientific, technical and regulatory issues. The FDA has established an Office of Combination
Products (“OCP”) to address the challenges associated with the review and regulation of combination products. The
OCP assists in determining strategies for the approval of drug/delivery combinations and assuring agreement within
the FDA on review responsibilities. The device specific information is filed with FDA as part of the drug approval
submission or it may be filed separately in the form of a device master file (“MAF”). In most cases, the device
specific information may need to be filed as part of the drug approval submission, and in those cases we will seek
agreement from the Agency for review of the device portion of the submission by the Center for Devices and
Radiological Health (“CDRH”) under the medical device provisions of the law.
25
An MAF filing typically supports a regulatory filing in the approval pathway. Where common data elements
may be part of several submissions for regulatory approval, as in the case of information supporting an injection
system; an MAF filing with the FDA may be the preferred route. A delivery device that is considered a product
only when combined with a drug, and where such a device is applicable to a variety of drugs, represents another
opportunity for such a filing. We intend to pursue such strategies as permitted by the law and as directed by the
FDA either through guidance documents or discussions.
Development of a device with a previously unapproved new drug likely will be handled as part of the NDA for
the new drug itself. Under these circumstances, the device component will be handled as a drug accessory and will
be approved, if ever, only when the NDA itself is approved. Our injectors may be required to be approved as a
combination drug/device product under an sNDA for use with previously approved drugs. Under these
circumstances, our device could be used with the drug only if and when the supplemental NDA is approved for this
purpose. It is possible that, for some or even all drugs, the FDA may take the position that a drug-specific approval
must be obtained through a full NDA or supplemental NDA before the device may be packaged and sold in
combination with a particular drug. Teva launched the Tjet® device in August of 2009 for use in delivery of Teva’s
form of hGH, Tev-Tropin®, following the approval of the hGH sNDA in June 2009.
To the extent that our injectors are packaged with the drug, as part of a drug delivery system, the entire package
will be subject to the requirements for drug/device combination products. These include drug manufacturing
requirements, drug adverse reaction reporting requirements, and all of the restrictions that apply to drug labeling and
advertising. In general, the drug requirements under the FD&C Act are more onerous than medical device
requirements. These requirements could have a substantial adverse impact on our ability to commercialize our
products and our operations.
The FD&C Act also regulates quality control and manufacturing procedures by requiring that we and our
contract manufacturers demonstrate compliance with the current QSR. The FDA’s interpretation and enforcement of
these requirements have been increasingly strict in recent years and seem likely to be even more stringent in the
future. The FDA monitors compliance with these requirements by requiring manufacturers to register with the FDA
and by conducting periodic FDA inspections of manufacturing facilities. If the inspector observes conditions that
might violate the QSR, the manufacturer must correct those conditions or explain them satisfactorily. Failure to
adhere to QSR requirements would cause the devices produced to be considered in violation of the FDA Act and
subject to FDA enforcement action that might include physical removal of the devices from the marketplace.
The FDA’s Medical Device Reporting regulation requires companies to provide information to the FDA on the
occurrence of any death or serious injuries alleged to have been associated with the use of their products, as well as
any product malfunction that would likely cause or contribute to a death or serious injury if the malfunction were to
recur. FDA also requires reporting of recalls and other field actions taken to reduce a risk to health or to remedy a
violation caused by a device that may present a risk to health. In addition, FDA regulations prohibit a device from
being marketed for unapproved or uncleared indications. If the FDA believes that a company is not in compliance
with these regulations, it could institute proceedings to detain or seize company products, issue a recall, seek
injunctive relief or assess civil and criminal penalties against the company or its executive officers, directors or
employees.
In addition to regulations enforced by the FDA, we must also comply with regulations under the Occupational
Safety and Health Act, the Environmental Protection Act, the Toxic Substances Control Act, the Resource
Conservation and Recovery Act and other federal, state and local regulations.
Foreign Approval Process
In addition to regulations in the United States, we are subject to various foreign regulations governing clinical
trials and the commercial sales and distribution of our products. We must obtain approval of a product by the
comparable regulatory authorities of foreign countries before we can commence clinical trials or marketing of the
product in those countries. The requirements governing the conduct of clinical trials, product licensing, pricing and
reimbursement and the regulatory approval process all vary greatly from country to country. Additionally, the time it
takes to complete the approval process in foreign countries may be longer or shorter than that required for FDA
approval. Foreign regulatory approvals of our products are necessary whether or not we obtain FDA approval for
26
such products. Finally, before a new drug may be exported from the United States, it must either be approved for
marketing in the United States or meet the requirements of exportation of an unapproved drug under Section 802 of
the Export Reform and Enhancement Act or comply with FDA regulations pertaining to INDs.
Under European Union regulatory systems, we are permitted to submit marketing authorizations under either a
centralized or decentralized procedure. The centralized procedure provides for the grant of a single marketing
authorization that is valid for all member states of the European Union. The decentralized procedure provides for
mutual recognition of national approval decisions by permitting the holder of a national marketing authorization to
submit an application to the remaining member states. Within 90 days of receiving the applications and assessment
report, each member state must decide whether to recognize approval.
Sales of medical devices outside of the U.S. are subject to foreign legal and regulatory requirements. Certain of
our transdermal and injection systems have been approved for sale only in certain foreign jurisdictions. Legal
restrictions on the sale of imported medical devices and products vary from country to country. The time required to
obtain approval by a foreign country may be longer or shorter than that required for FDA approval, and the
requirements may differ. We rely upon the companies marketing our injectors in foreign countries to obtain the
necessary regulatory approvals for sales of our products in those countries.
We have ISO 13485: 2003 certification, the medical device industry standard for our quality systems. This
certification shows that our device development and manufacturing comply with standards for quality assurance,
design capability and manufacturing process control. Such certification, along with compliance with the European
Medical Device Directive enables us to affix the CE Mark (a certification indicating that a product has met EU
consumer safety, health or environmental requirements) to current products and supply the device with a Declaration
of Conformity. Regular surveillance audits by our notified body, British Standards Institute, are required to
demonstrate continued compliance.
Employees
We believe that our success is largely dependent upon our ability to attract and retain qualified personnel in the
research, development, manufacturing, business development and commercialization fields. As of March 4, 2014,
we had 60 full-time employees. Of the 60 employees, 38 are primarily involved in research, development and
manufacturing activities, 9 are primarily involved in commercialization, with the remainder engaged in executive
and administrative capacities. Although we believe that we are appropriately sized to focus on our mission, we
intend to add personnel with specialized expertise, as needed.
We believe that we have been successful to date in attracting skilled and experienced scientific and business
professionals. We consider our employee relations to be good, and none of our employees are represented by any
labor union or other collective bargaining unit.
Available Information
We file with the United States Securities and Exchange Commission (“SEC”) annual reports on Form 10-K,
quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements and other documents as required by
applicable law and regulations. The public may read and copy any materials that we file with the SEC at the SEC’s
Public Reference Room at 100 F Street, N. E., Washington, DC 20549. The public may obtain information on the
operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330 (1-800-732-0330). The SEC
maintains an Internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other
information regarding
We maintain an Internet site
(http://www.antarespharma.com). We make available free of charge on or through our Internet website our annual
reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to these
reports, as soon as reasonably practicable after electronically filing those documents with or furnishing them to the
SEC. The information on our website is not incorporated into and is not a part of this annual report.
that file electronically with
the SEC.
issuers
27
Item 1A. RISK FACTORS
The following “risk factors” contain important information about us and our business and should be read in their
entirety. Additional risks and uncertainties not known to us or that we now believe to be not material could also
impair our business. If any of the following risks actually occur, our business, results of operations and financial
condition could suffer significantly. As a result, the market price of our common stock could decline and you could
lose all of your investment. In this Section, the terms the “Company,” “we”, “our” and “us” refer to Antares
Pharma, Inc.
Risks Related to Our Operations
We have incurred significant losses to date, and there is no guarantee that we will ever become profitable.
We incurred net losses of $20,506,776 and $11,427,450 in the fiscal years ended 2013 and 2012, respectively.
In addition, we have accumulated aggregate net losses from the inception of business through December 31, 2013 of
$173,295,941. The costs for research and product development of our product candidates and drug delivery
technologies along with marketing and selling expenses and general and administrative expenses have been the
principal causes of our losses. We may not ever become profitable and if we do not become profitable your
investment would be harmed.
We may need additional capital in the future in order to continue our operations.
In the fourth quarter of 2012, we sold 14,259,868 shares of common stock at a price of $4.00 per share in a
public offering. The sale of common stock resulted in net proceeds of $53,328,188 after deducting offering
expenses of $3,711,284. In addition, we received proceeds from warrant and stock option exercises of $2,326,838
and $11,579,413 in 2013 and 2012, respectively. If in the future we do not turn profitable or generate cash from
operations and additional capital is needed to support operations, economic and market conditions may make it
difficult to raise additional funds through debt or equity financings.
At December 31, 2013 we had cash and investments of $69,089,710. The combination of our current cash and
investments balance and projected product sales, product development, license revenues, milestone payments and
royalties should provide us with sufficient funds to support operations. However, if funds are not sufficient to
support operations, we may need to pursue a financing or reduce expenditures to meet our cash requirements. If we
do obtain such financing, we cannot assure that the amount or the terms of such financing will be as attractive as we
may desire. If we are unable to obtain such financing when needed, or if the amount of such financing is not
sufficient, it may be necessary for us to take significant cost saving measures or generate funding in ways that may
negatively affect our business in the future. To reduce expenses, we may be forced to make personnel reductions or
curtail or discontinue development programs. To generate funds, it may be necessary to monetize future royalty
streams, sell intellectual property, divest of technology platforms or liquidate assets. However, there is no assurance
that, if required, we will be able to generate sufficient funds or reduce spending to provide the required liquidity.
Long-term capital requirements will depend on numerous factors, including, but not limited to, the status of
collaborative arrangements, the progress of research and development programs and the receipt of revenues from
sales of products. Our ability to achieve and/or sustain profitable operations depends on a number of factors, many
of which are beyond our control. These factors include, but are not limited to, the following:
our ability to successfully sell OTREXUP™;
our ability to successfully develop our own product candidates such as Vibex® QS T;
the success of our partners in selling our products;
our ability to successfully sell future products if we choose not to partner the product;
our ability to manufacture products efficiently, at the appropriate commercial scale, and with the required
quality;
timing of our partners’ development, regulatory and commercialization plans;
the demand for our technologies from current and future pharmaceutical partners;
our ability to increase and continue to outsource manufacturing capacity to allow for new product
introductions;
28
the level of product competition and of price competition;
patient acceptance of our current and future products;
our ability to obtain reimbursement for our products from third party payers;
our ability to develop additional commercial applications for our products;
our ability to obtain regulatory approvals;
our ability to attract the right personnel to execute our plans;
our ability to develop, maintain or acquire patent positions;
our ability to control costs; and
general economic conditions.
We have recently launched OTREXUP™ and as a company we have limited marketing and internal sales
capabilities.
We have recently commercially launched OTREXUP™. Although we have hired highly qualified personnel
with specialized expertise, as a company, we have limited experience commercializing pharmaceutical products on
our own. In order to commercialize OTREXUP™, we have been building our sales, marketing, distribution,
managerial and other non-technical capabilities and have made arrangements with third parties to perform these
services when needed. We have engaged a third party contract sales organization, Quintiles, to commercialize
OTREXUP™ for RA in the U.S. and have provided LEO Pharma the exclusive right to commercialize
OTREXUP™ in the U.S. for the treatment of psoriasis. To the extent we are relying on third parties to
commercialize OTREXUP™, we may receive less revenues or incur more expenses than if we had commercialized
OTREXUP™ ourselves. In addition, we may have limited control over the sales efforts of any third parties
involved in our commercialization efforts. If we are unable to successfully implement our commercial plans and
drive adoption by patients and physicians of OTREXUP™ through our sales, marketing and commercialization
efforts, or if our partner fails to successfully commercialize OTREXUP™, then we may not be able to generate
sustainable revenues from product sales which will have a material adverse effect on our business and future product
opportunities. Similarly, we may not be successful in establishing the necessary commercial infrastructure,
including managed care, medical affairs and pharmacovigilance teams. The establishment and development of
commercialization capabilities to market OTREXUP™ has been and will continue to be expensive and time-
consuming. As we continue to develop these capabilities, we will have to compete with other pharmaceutical
companies to recruit, hire, train and retain sales and marketing personnel. If we have underestimated the necessary
sales and marketing capabilities or have not established the necessary infrastructure to support successful
commercialization, or if our efforts to do so take more time and expense than anticipated, our ability to market and
sell OTREXUP™ may be adversely affected.
Commercialization of OTREXUP™ will require significant resources and if we do not achieve the sales expected we
may lose the substantial investment made in OTREXUP™.
We have made and are continuing to make substantial expenditures commercializing OTREXUP™. We are
devoting substantial resources to building our manufacturing and assembly equipment for OTREXUP™ as well as
continued investment in commercial supply inventories of OTREXUP™ to support commercialization. We have
and expect to continue to devote substantial resources to establish and maintain a marketing capability for
OTREXUP™. These costs have increased as we have recently launched OTREXUP™. If we are unsuccessful in
our commercialization efforts and do not achieve the sales levels of OTREXUP™ that we expect, we may be unable
to recover the large investment we have made in research, development, manufacturing, inventory and marketing
efforts, and our business and financial condition could be materially adversely affected.
Our commercialization partner, LEO Pharma, may not successfully commercialize OTREXUP™ in the U.S. for the
treatment of psoriasis.
We have provided LEO Pharma (LEO) an exclusive license to commercialize OTREXUP™ in the U.S. for the
treatment of psoriasis. LEO is solely responsible for all promotional and marketing activities related to
OTREXUP™ for psoriasis. If LEO fails to adequately market and promote OTREXUP™ or is unsuccessful in their
efforts, we may receive less revenue than we desire or may receive less than if we had commercialized the product
ourselves. We may disagree with LEO as to sales and marketing tactics or the manner in which LEO is positioning
29
OTREXUP™. A breach by either party, or disagreement with LEO, may lead to termination of the agreement,
which could have a material adverse effect on our sales level of OTREXUP™.
We will rely on third parties to perform many necessary services for OTREXUP™, including services related to the
distribution, invoicing, storage and transportation of our products.
We have retained third-party service providers to perform a variety of functions related to the sale and
distribution of our products, key aspects of which are out of our direct control. For example, we will rely on
Cardinal Health 105, Inc. (a/k/a Specialty Pharmaceutical Services) to provide key services related to logistics,
warehousing and inventory management, distribution, contract administration and chargeback processing, accounts
receivable management and call center management, and, as a result, most of our finished goods inventory is stored
at a single warehouse maintained by the service provider. We place substantial reliance on this provider as well as
other third-party providers that perform services for us, including entrusting our inventories of products to their care
and handling. If these third-party service providers fail to comply with applicable laws and regulations, fail to meet
expected deadlines, or otherwise do not carry out their contractual duties to us, or encounter physical damage or
natural disaster at their facilities, our ability to deliver product to meet commercial demand would be significantly
impaired. In addition, we utilize third parties to perform various other services for us relating to sample
accountability and regulatory monitoring, including adverse event reporting, safety database management and other
product maintenance services. If the quality or accuracy of the data maintained by these service providers is
insufficient, our ability to continue to market our products could be jeopardized or we could be subject to regulatory
sanctions. We do not currently have the internal capacity to perform these important commercial functions, and we
may not be able to maintain commercial arrangements for these services on reasonable terms.
If we do not develop and maintain relationships with manufacturers of our drug products or candidates, then we
may be unable to successfully manufacture and sell our pharmaceutical products.
We do not possess the facilities to manufacture commercial quantities of our drug/device combination product,
OTREXUP™, or any other of our products or product candidates. We must contract with manufacturers to produce
products according to government regulations. Our future development and delivery of our product candidates
depends on the timely, profitable and competitive performance of these manufacturers. A limited number of
manufacturers exist which are capable of manufacturing our product candidates. We may fail to contract with the
necessary manufacturers or we may contract with manufactures on terms that may not be favorable to us. Our
manufacturers must obtain FDA approval for their manufacturing processes, and we have no control over this
approval process. Additionally, use of contract manufacturers exposes us to risks in the manufacturer's business such
as their potential inability to perform from a technical, operational or financial standpoint.
We have entered into multiple commercial supply agreements with third-party manufacturers, including,
without limitation:
the supply of the methotrexate drug substance;
the manufacture of prefillable syringes;
the production of the methotrexate drug substance in pre-filled syringes;
the manufacture and partial assembly of Medi-Jet auto injectors; and
the final assembly and packaging of OTREXUP™ in Medi-Jet auto injectors.
Reliance on third-party manufacturers entails risks to which we would not be subject if we manufactured
products ourselves, including:
reliance on the third party for regulatory compliance, quality assurance and adequate training in
management of manufacturing staff;
the possible breach of the manufacturing agreement by the third party because of factors beyond our
control; and
the possibility of termination or non-renewal of the agreement by the third party, based on its own
business priorities, at a time that is costly or inconvenient for us.
30
We depend on these third party manufacturers to comply with Current Good Manufacturing Practice regulations
(cGMPs) enforced by the FDA and other regulatory requirements and to deliver materials on a timely basis. In
addition, because regulatory approval to manufacture a drug is generally site-specific, the FDA and other regulatory
authorities will repeatedly inspect our current and future third-party manufacturers’ facilities for compliance with
cGMPs. If we or our third-party manufacturers fail to comply with applicable regulatory requirements, a regulatory
agency may issue warning letters or suspend or withdraw our regulatory approval for approved or in-market
products, among other things. Our third-party manufacturers may also fail to pass the audits by our internal quality
and regulatory group. Any of these actions could delay our development of products, delay the submission of these
products for regulatory approval or result in insufficient product quantity to support commercial demand. As a
result, our business, financial condition and results of operations could be seriously harmed. See additional risk
factors associated with manufacturing in the section “Risks Related to Regulatory Matters.”
The following are three of our significant third-party manufacturing arrangements.
We have contracted with Uman Pharma (Montreal, Canada) to supply commercial quantities of methotrexate
pre-filled syringes for the U.S and Canadian markets for OTREXUP™. Any failure by Uman to successfully
manufacture the methotrexate pre-filled syringes in commercial quantities, be in compliance with FDA and other
regulatory regulations, or pass the audits by our internal quality and regulatory group would have a negative impact
on our future revenue expectations.
We have contracted with Nypro, an international manufacturing development company to commercialize our
Vibex® pressure assisted auto injector device, for our proprietary OTREXUP™ methotrexate system, in compliance
with FDA QSR regulations. Any failure by Nypro to successfully manufacture the pressure assisted auto injector
device in commercial quantities, be in compliance with regulatory regulations, or pass the audits by our internal
quality and regulatory group would have a negative impact on our future revenue expectations.
We have contracted with Sharp Corporation (“Sharp”), an international contract packaging company, to
assemble and package OTREXUP™. Sharp is subject to regulatory requirements covering, among other things,
manufacturing, testing, quality control and record keeping relating to our product, and is subject to ongoing
inspections by regulatory agencies. Failure by Sharp to comply with applicable regulations may result in long delays
and interruptions to our supply of OTREXUP™, and increase our costs, while we seek to secure another contract
packaging company who meets all regulatory requirements. Accordingly, the loss of Sharp or any of our current
third-party manufacturers or suppliers could have a material adverse effect on our business, results of operations,
and financial condition.
We are dependent on numerous third parties in our supply chain for the commercial supply of OTREXUP™, most of
which are currently single source suppliers, and if any of these single-source suppliers are not able to satisfy
demand and alternative sources are not available, the manufacturing and distribution of OTREXUP™ could be
delayed and our business could be harmed.
We currently have the following single source suppliers in our supply chain for the commercial supply of
OTREXUP™:
Supplier of the Active Pharmaceutical Ingredient (API) for methotrexate;
Uman Pharma for supply of commercial quantities of methotrexate pre-filled syringes;
Nypro for the supply of commercial quantities of the Medi-Jet auto injectors;
Sharp Corporation for assembly and packaging of OTREXUP™;
Cardinal Health 105, Inc. (a/k/a Specialty Pharmaceutical Services) for services related to logistics,
warehousing and inventory management, distribution, contract administration and chargeback
processing, accounts receivable management and call center management.
We are currently working on qualifying a backup supplier for the pre-filled syringes of methotrexate and an
additional supplier of methotrexate API. Although we plan to qualify these and additional manufacturers and
suppliers in our supply chain for OTREXUP™, there can be no assurance that we will be able to do so and the
current manufacturers and suppliers will likely be single source suppliers to us for a significant period of time. If
any of these manufacturers is unable to supply its respective component for any reason, including due to violations
31
of the FDA’s Quality System Regulation, or QSR, requirements, our ability to manufacture the finished
OTREXUP™ product will be adversely affected and our ability to meet the distribution requirements for any
product sales of OTREXUP™ and the resulting revenue therefrom will be negatively affected. Accordingly, there
can be no assurance that any failure in any part of our supply chain will not have a material adverse effect on our
ability to generate revenue from OTREXUP™, which in turn could have a material adverse effect on our business,
results of operations and financial condition.
To mitigate some of the short-term risk of relying on single source suppliers, we intend to build a safety stock
of component and finished goods inventories. However, there can be no assurance that these inventories will be
adequate or that we will be able to maintain our desired level of safety stock. Additionally, maintaining a high level
of safety stock exposes us to additional risks such as excess and obsolete inventory if the sales volume of
OTREXUP™ does not meet our forecasts.
If we are unable to achieve and maintain adequate levels of coverage and reimbursement for OTREXUP™, or any
of our other product candidates for which we may receive regulatory approval, their commercial success may be
severely hindered.
Successful sales of our products depend on the availability of adequate coverage and reimbursement from third-
party payors. Patients who are prescribed medicine for the treatment of their conditions generally rely on third-party
payors to reimburse all or part of the costs associated with their prescription drugs. Adequate coverage and
reimbursement from governmental healthcare programs, such as Medicare and Medicaid, and commercial payors is
critical to new product acceptance. Coverage decisions may depend upon clinical and economic standards that
disfavor new drug products when more established or lower cost therapeutic alternatives are already available or
subsequently become available. Assuming coverage is approved; the resulting reimbursement payment rates might
not be adequate or may require co-payments that patients find unacceptably high. Patients are unlikely to use our
products unless coverage is provided and reimbursement is adequate to cover a significant portion of the cost of our
products.
In addition, the market for our products will depend significantly on access to third-party payors' drug
formularies, or lists of medications for which third-party payors provide coverage and reimbursement. The industry
competition to be included in such formularies often leads to downward pricing pressures on pharmaceutical
companies. Also, third-party payors may refuse to include a particular branded drug in their formularies or otherwise
restrict patient access to a branded drug when a less costly generic equivalent or other alternative is available.
Third-party payors, whether foreign or domestic, or governmental or commercial, are developing increasingly
sophisticated methods of controlling healthcare costs. In addition, in the United States, no uniform policy of
coverage and reimbursement for drug products exists among third-party payors. Therefore, coverage and
reimbursement for drug products can differ significantly from payor to payor.
Further, we believe that future coverage and reimbursement will likely be subject to increased restrictions both
in the United States and in international markets. Third-party coverage and reimbursement for OTREXUP™ or any
of our other product candidates for which we may receive regulatory approval may not be available or adequate in
either the United States or international markets, which could have a material adverse effect on our business, results
of operations, financial condition and prospects.
Our Tjet® device was launched by Teva in the U.S. in 2009 for use with Teva’s hGH, Tev-Tropin®. Although
Teva currently provides the device and disposables at no cost to the patient, the amount of health insurance
reimbursement of Tev-Tropin® has a direct impact on the device product sales and royalty due from Teva to us.
Additionally, Teva has provided significant rebates to third party payors, which reduces net sales of Tev-Tropin®
thus reducing the royalty payable to us.
Elestrin®, for which we receive royalties from our partner Meda based on net commercial sales, was launched in
June 2007. Since it is not our product, we have no way of knowing if health insurance companies’ reimbursement
has negatively impacted patient use of Elestrin®. The sales of Elestrin® are growing month over month but continue
to be modest.
32
Gelnique 3%, for which we receive royalties from our partner Actavis based on net sales, was launched in April
2012. Actavis has provided significant rebates to third party payors, which reduces net sales of Gelnique, thus
reducing the royalty payable to us. The use of large rebates to the third party payors has not had a positive impact
on the growth of Gelnique prescriptions.
The failure of any of our third-party licensees to develop, obtain regulatory approvals for, market, distribute and
sell our products as planned may result in us not meeting revenue and profit targets.
Pharmaceutical company partners such as Teva help us develop, obtain regulatory approvals for, manufacture
and sell our products. If one or more of these pharmaceutical company partners fail to pursue the development or
marketing of the products as planned, our revenues and profits may not reach expectations or may decline. We may
not be able to control the timing and other aspects of the development of products because pharmaceutical company
partners may have priorities that differ from ours. Therefore, commercialization of products under development
may be delayed unexpectedly. The success of the marketing organizations of our pharmaceutical company partners,
as well as the level of priority assigned to the marketing of the products by these entities, which may differ from our
priorities, will determine the success of the products incorporating our technologies. Competition in this market
could also force us to reduce the prices of our technologies below currently planned levels, which could adversely
affect our revenues and future profitability.
We are currently working with Teva on four products (Vibex® with epinephrine, Vibex® with sumatriptan and
2 undisclosed pen products) for which we are anticipating approval and launch in the 2015 to 2016 timeframe.
Additionally, we are working with Pfizer on an undisclosed product for which we are anticipating approval and
launch in 2016. There is no assurance that development of these products will continue or that they will receive
FDA approval or if FDA approved they will be a significant revenue source for us.
We currently depend on a limited number of customers for the majority of our revenue, and the loss of any one of
these customers could substantially reduce our revenue and impact our liquidity.
For the year ended December 31, 2013, we derived approximately 66% of our revenue from Teva, 19% from
Ferring and 7% from Actavis. For the year ended December 31, 2012, we derived approximately 33% of our
revenue from Teva, 22% from Ferring and 30% from Actavis. The revenue from Teva was product sales, royalties
and license and development revenue. The revenue from Actavis was product sales, manufacturing start-up and
other development activities, royalties and a milestone payment that was recognized in 2012. Although significant
in 2012, Actavis product sales and development revenue was minimal in 2013, as Actavis assumed manufacturing
responsibilities in early 2013. The revenue from Ferring was primarily product sales and royalties.
The loss of any of these significant customers or partners or reduction in our business activities could cause our
revenues to decrease significantly and increase our continuing losses from operations. If OTREXUP™ is not
successful and we cannot broaden our customer base, we will continue to depend on a few customers for the
majority of our revenues. Additionally, if we are unable to negotiate favorable business terms with these customers
in the future, our revenues and gross profits may be insufficient to allow us to achieve and/or sustain profitability or
continue operations.
We have entered into four license, development and/or supply agreements for five potential products since
November of 2005 with Teva or an affiliate of Teva. To date we have received FDA approval of one of those
products, the Tjet® needle-free device for use with Teva’s 5mg Tev-Tropin® brand hGH. Teva is currently
marketing the Tjet® device to its patients and we expect product sales and royalties from this product into the future.
Although certain upfront, milestone, development payments and devices sales have been received for the other
programs with Teva, timelines have been extended and there can be no assurance that there ever will be commercial
sales or future milestone payments under these other agreements.
We have a license agreement with Ferring, under which Ferring commercialized our needle-free injection
system with their 4mg and 10mg hGH formulations marketed as Zomajet® 2 Vision and Zomajet® Vision X,
respectively, in Europe and Asia. We receive a purchase price and a royalty for each device sold to Ferring and a
royalty on their hGH sales if we meet certain product quality metrics. Although these products have been on the
33
market for many years, there can be no assurance that Ferring will continue to use our device or that approval of
new devices developed by us will occur.
In July 2011, we entered into an exclusive licensing agreement with Actavis for Actavis to commercialize, in
the U.S. and Canada, our topical oxybutynin gel 3% product, which was subsequently approved by the FDA in
December 2011. Under terms of the agreement, Actavis made payments for certain manufacturing start-up activities
and milestone payments based on the achievement of regulatory approval. Additionally, milestone payments will be
made upon the achievement of certain sales levels. Upon launch of the product, we began receiving royalties based
on product sales in the U.S. and Canada for both our oxybutynin gel 3% product and their oxybutynin gel product
Gelnique® 10%. In early 2013, Actavis assumed all responsibility for manufacture and supply of the product.
Although milestone payments and royalties have been received from Actavis, there is no assurance that future sales
based milestones or significant royalties will be received under this agreement.
In December 2011, we licensed one of our drug delivery technologies to Pfizer Inc.’s Consumer Healthcare
Business Unit to develop an undisclosed product on an exclusive basis for North America. Pfizer will assume full
cost and responsibility for all clinical development, manufacturing, and commercialization of the product in the
licensed territory, which also includes certain non-exclusive territories outside of North America. We received an
upfront payment, and will receive development milestones and sales based milestones, as well as royalties on net
sales for three years post launch in the U.S. Although an upfront payment has been received, there can be no
assurance that there ever will be commercial sales or future milestone payments or royalties under this agreement.
We have become more commercially oriented by further developing our own products and less dependent on our
pharmaceutical partners, and we may not have sufficient resources to fully execute our plan.
We must make choices as to the drugs that we develop on our own. We may not make the correct choice of
drug or technologies when combined with a drug, which may not be accepted by the marketplace as we expected or
at all. FDA approval processes for the drugs and drugs with devices may be longer in time and/or more costly
and/or require more extended clinical evaluation than anticipated. Funds required to bring our own products to
market may be more than anticipated or may not be available at all. We have limited experience in bringing such
products to market; therefore, we may experience difficulties in execution of development of internal product
candidates.
If we do not develop and maintain relationships with manufacturers of our device products, then we may be unable
to successfully manufacture and sell our device products.
Our device manufacturing for our needle-free device has involved the assembly of products from machined
stainless steel and composite components in limited quantities. Our device manufacturing for our Medi-Jet™ auto
injector for OTREXUP™ has involved high volume production of numerous complex parts as well as assembly of
those parts. Our planned future device business may necessitate changes and additions to our contract
manufacturing and assembly process or the use of a secondary manufacturer due to the anticipated larger scale of
manufacturing in our business plan. Our devices must be manufactured in compliance with regulatory requirements,
in a timely manner and in sufficient quantities while maintaining quality and acceptable manufacturing costs. In the
course of these changes and additions to our manufacturing and production methods, we may encounter difficulties,
including problems involving scale-up, yields, quality control and assurance, product reliability, manufacturing
costs, existing and new equipment and component supplies, any of which could result in significant delays in
production.
We operate under a manufacturing agreement with Minnesota Rubber and Plastics (“MRP”), a contract
manufacturing company, who manufactures and assembles our needle-free devices and certain related disposable
component parts for our partners Teva, Ferring and JCR. There can be no assurance that MRP will be able to
continue to meet these regulatory requirements or our own quality control standards. Therefore, there can be no
assurance that we will be able to continue to successfully produce and manufacture our products. Our
pharmaceutical partners retain the right to audit the quality systems of our manufacturing partner, and there can be
no assurance that MRP will be successful in these audits. Any of these failures would negatively impact our
business, financial condition and results of operations. We will also continue to outsource manufacturing of our
future disposable injection products to third parties. Such products will be price sensitive and may be required to be
34
manufactured in large quantities, and we have no assurance that this can be done. Additionally, use of contract
manufacturers exposes us to risks in the manufacturers’ business such as their potential inability to perform from a
technical, operational or financial standpoint.
We have contracted with Nypro, an international manufacturing development company to commercialize our
Vibex® pressure assisted auto injector device, for our epinephrine auto injector for Teva and our proprietary
OTREXUP™ methotrexate system, in compliance with FDA QSR regulations. Any failure by Nypro to
successfully manufacture the pressure assisted auto injector device in commercial quantities, be in compliance with
regulatory regulations, or pass the audits by our internal quality and regulatory group or pharmaceutical partner
would have a negative impact on our future revenue expectations.
We have contracted with Phillips-Medisize Corporation (Phillips), an international outsource provider of design
and manufacturing services, to produce clinical and commercial quantities of our Vibex® QS T auto injector device
and our pen injector device for an undisclosed Teva product. Any failure by Phillips to successfully manufacture the
Vibex® QS T auto injector device or the pen injector device in clinical and commercial quantities, be in compliance
with regulatory regulations, or pass the audits by our internal quality and regulatory group or pharmaceutical partner
would have a negative impact on our future revenue expectations.
We rely on third parties to supply components for our products, and any failure to retain relationships with these
third parties could negatively impact our ability to manufacture our products.
Certain of our technologies contain a number of customized components manufactured by various third parties.
Regulatory requirements applicable to manufacturing can make substitution of suppliers costly and time-consuming.
In the event that we could not obtain adequate quantities of these customized components from our suppliers, there
can be no assurance that we would be able to access alternative sources of such components within a reasonable
period of time, on acceptable terms or at all. The unavailability of adequate quantities, the inability to develop
alternative sources, a reduction or interruption in supply or a significant increase in the price of components could
have a material adverse effect on our ability to manufacture and market our products.
If transdermal gels do not achieve greater market acceptance, we may not realize significant revenue from these
products.
Because transdermal gels are not a widely understood method of drug delivery, our partners and consumers may
have little experience with such products. To date, transdermal gels have gained successful entry into only a limited
number of markets such as the testosterone replacement market and the pain market. There can be no assurance that
transdermal gels will ever gain market acceptance beyond these markets sufficient to allow us to achieve significant
royalties in this product area.
Elestrin®, our transdermal estradiol gel, was launched by ANI’s marketing partner Bradley in June 2007.
Bradley was acquired by Nycomed in February 2008. ANI reacquired Elestrin® from Nycomed and in December
2008 relicensed all manufacturing, distribution and marketing responsibilities of Elestrin® to Azur. In January 2012
Azur was acquired by Jazz. Elestrin® is currently being marketed in the U.S. by Meda, who acquired the product
from Jazz in 2012. The multiple licenses of Elestrin® and shifting marketing responsibilities has had a negative
impact on the marketing efforts of Elestrin® and to date, the market penetration of Elestrin® has been low. The
increased focus on the product by Meda has recently had a positive effect on the growth of the product but there is
no assurance that this growth will continue.
Gelnique 3%, our transdermal oxybutynin product, competes in a large market dominated by oral products. To
date, transdermal products such as gels and patches have not had overwhelming success in gaining market share.
Gelnique 3% was launched in April 2012 by our partner Actavis. Actavis is currently marketing Gelnique 3% along
with Gelnique 10% with a large sales force focused on urologists. We receive royalties on net sales of both
Gelnique 3% and Gelnique 10%. Gelnique has not experienced the patient acceptance originally anticipated and is a
small product in this field.
35
The loss of any existing licensing agreements or the failure to enter into new licensing agreements could
substantially affect our revenue.
One of our business strategies to reduce development risk is to enter into license agreements with
pharmaceutical companies covering the development, manufacture, use and marketing of our drug delivery devices
with specific drug therapies. Under these arrangements, the partners typically assist us in the development of the
product and sponsor the collection of the appropriate data for submission for regulatory approval of the use of the
drug delivery device with the licensed drug therapy. Our licensees may also be responsible for distribution and
marketing of the product or technologies for these therapies either worldwide or in specific territories. We are
currently a party to a number of such agreements, all of which are currently in varying stages of development. We
may not be able to meet future milestones established in our agreements (such milestones generally being structured
around satisfactory completion of certain phases of clinical development,
regulatory approvals and
commercialization of our product) and thus, would not receive the fees expected from such arrangements, related
future royalties or product sales. Moreover, there can be no assurance that we will be successful in executing
additional collaborative agreements or that existing or future agreements will result in increased sales of our drug
delivery technologies or products. In such event, our business, results of operations and financial condition could be
adversely affected, and our revenues and gross profits may be insufficient to allow us to achieve and/or sustain
profitability. As a result of our collaborative agreements, we are dependent upon the development, data collection
and marketing efforts of our licensees. The amount and timing of resources such licensees devote to these efforts
are not within our control, and such licensees could make material decisions regarding these efforts that could
adversely affect our future financial condition and results of operations. In addition, factors that adversely impact
the introduction and level of sales of any drug or drug device covered by such licensing arrangements, including
competition within the pharmaceutical and medical device industries, the timing of regulatory or other approvals and
intellectual property litigation, may also negatively affect sales of our drug delivery technology. We are relying on
partners such as Teva, Ferring, Actavis, Meda, Pfizer and LEO Pharma for future milestone, sales and royalty
revenue. Any or all of these partners may never commercialize a product with our technologies, may be
unsuccessful in commercializing a product, or significant delays in anticipated launches of these products may
occur. Any potential loss of anticipated future revenue could have an adverse effect on our business and the value of
your investment.
If we cannot develop and market our products as rapidly or cost-effectively as our competitors, then we may never
be able to achieve profitable operations.
Competitors in the methotrexate, overactive bladder, injector device and other markets, some with greater
resources and experience than us, may enter these markets, as there is an increasing recognition of a need for
branded 505(b)2 products. Our success depends, in part, upon maintaining a competitive position in the
development of products and technologies in rapidly evolving fields. If we cannot maintain competitive products
and technologies, our current and potential pharmaceutical company partners may choose to adopt the technologies
of our competitors. Companies that compete with our injector based technologies include Ypsomed, Owen
Mumford, Elcam, SHL, Bioject Medical Technologies, Inc., Haselmeier, Bespak-Consort Medical, West
Pharmaceuticals and Becton Dickinson, along with other companies. We also compete generally with other
biotechnology and pharmaceutical companies engaged in the development of alternative drug delivery technologies
or new drug research and testing.
The rheumatoid arthritis market, which is the main focus of our efforts for OTREXUP™, is intensely
competitive. We face competition with respect to OTREXUP™ from major pharmaceutical companies and
biotechnology companies worldwide. Potential competitors also include academic institutions and other public and
private research institutions that conduct research, seek patent protection and establish collaborative arrangements
for research, development, manufacturing and commercialization. Our competitors may develop products that are
safer, more effective, have fewer side effects, are more convenient or are less costly than OTREXUP™.
In the rheumatoid arthritis market we face competition from several branded and generic products, many from
larger companies that have more experience and greater resources than does our Company. Competition in the
rheumatoid arthritis market includes tablets and parenteral forms of methotrexate that are currently marketed in the
U.S. by several generic manufacturers, including Teva, Mylan, Roxane, Bedford Labs, APP Pharmaceuticals and
Hospira. In several European countries, Canada, and South Korea, Medac International or its licensees market
36
methotrexate in prefilled syringes (Metoject®) and recently methotrexate in an auto injector. Other commonly used
pharmaceutical treatments for rheumatoid arthritis include analgesics, non-steroidal anti-inflammatory drugs
(NSAIDs), corticosteroids, so-called disease modifying anti-rheumatic drugs (DMARDs) and biologic response
modifiers. In addition to methotrexate, the DMARDs include azathioprine (Imuran®), cyclosporine (Neoral®),
hydroxychloroquine (Plaquenil®), auranofin (Ridura®), leflunomide (Arava®) and sulfasalazine (Azulfidine®). The
biologic response modifiers include blockbuster products etanercept (Enbrel®), adalimumab (Humira®), golimumab
(Simponi®), tocilizumab (Actemra®), certolizumab (Cimzia®), infliximab (Remicaid®), abatacept (Orencia®), and
rituximab (Rituxan®). They are often prescribed in combination with DMARDs such as methotrexate.
The Biologics Price Competition and Innovation Act permits the FDA to approve biosimilar versions of
biological products like Humira®, Enbrel®, Simponi®, Cimzia®, Orencia®, Actemra®, Rituxan® and Remicaid®
through an abbreviated approval pathway. This regulatory pathway could result in earlier entry of lower-cost
biosimilars which could lower our value proposition of OTREXUP™ relative to that of costlier branded biologics.
The approval of lower-cost biosimilar products could decrease the revenue we receive for OTREXUP™.
Many of our competitors have significantly greater financial resources and expertise in research and
development, manufacturing, pre-clinical testing, conducting clinical trials, obtaining regulatory approvals and
marketing and distributing approved products than we do. Smaller or early stage companies may also prove to be
significant competitors, particularly through collaborative arrangements with large and established companies.
These competitors also compete with us in acquiring products, product candidates and technologies complementary
to our programs or advantageous to our business.
Although not currently approved for subcutaneous administration, we may face competition from generic
versions of injectable methotrexate offered at substantially lower cost. Manufacturers may seek approval to market
low cost generic products without the cost and benefit of an auto injector which could appeal to third party payers
and reduce the market penetration of OTREXUP™.
Additionally, in January 2014, Medac Pharma announced that it had received FDA acceptance of a New Drug
Application (NDA) for a methotrexate containing auto-pen. Medac Pharma stated that it expected to self-
commercialize the methotrexate product upon FDA approval of the product. There is no assurance that Medac
Pharma will obtain FDA approval of the NDA or be able to launch the product in the U.S. market, but if approved
and launched Medac Pharma’s product would compete directly with OTREXUP™, which could reduce the market
penetration of OTREXUP™.
Although we have applied for, and/or have received, several patents and trademarks, we may be unable to protect
our intellectual property, which would negatively affect our ability to compete.
Our success depends, in part, on our ability to obtain and enforce patents for our products and device
technologies and to preserve our trade secrets and other proprietary information. If we cannot do so, our
competitors may exploit our innovations and deprive us of the ability to realize revenues and profits from our
developments.
We currently hold numerous patents and have numerous patent applications pending in the U.S. and other
countries. Our current patents may not be valid or enforceable and may not protect us against competitors that
challenge our patents, obtain their own patents that may have an adverse effect on our ability to conduct business, or
are able to otherwise circumvent our patents. Additionally, our products and technologies are complex and one
patent may not be sufficient to protect our products where a series of patents may be needed. Further, we may not
have the necessary financial resources to enforce or defend our patents or patent applications. In addition, any patent
applications we may have made or may make relating to inventions for our actual or potential products and
technologies may not result in patents being issued or may result in patents that provide insufficient or incomplete
coverage for our inventions.
Based on a Medac Pharma press release, we became aware that Medac Pharma submitted an NDA to the FDA
for an auto-pen containing methotrexate. On February 28, 2014, Antares filed a complaint against Medac Pharma
and Medac GmbH (“Medac GmbH”), the parent company of Medac Pharma, in the United States District Court for
the District of Delaware, alleging infringement of two of the Company’s patents regarding an auto-injector and an
37
auto-injector containing methotrexate. The complaint asserts that Medac Pharma’s NDA submission infringes, that
Medac Pharma’s proposed product will infringe the Company’s patents, and that Medac Pharma should be enjoined
from marketing its product. There is no assurance of success with any patent litigation, and it could be costly and
time consuming and depending on the ultimate outcome of the litigation may have an adverse effect on results of
operations and OTREXUP™ market penetration.
To protect our trade secrets and proprietary technologies and processes, we rely, in part, on confidentiality
agreements with employees, consultants and advisors. These agreements may not provide adequate protection for
our trade secrets and other proprietary information in the event of any unauthorized use or disclosure, or if others
lawfully and independently develop the same or similar information.
Others may bring infringement claims against us, which could be time-consuming and expensive to defend.
Third parties may claim that the manufacture, use or sale of our drug delivery technologies infringe their patent
rights. On March 7, 2014, Medac Pharma and Medac GmbH filed a patent infringement suit against Antares, LEO
Pharma and its parent company LEO Pharma A/S in the United State District Court for the District of New Jersey.
See “Legal Proceedings.” As with any litigation where claims may be asserted, we may have to seek licenses,
defend infringement actions or challenge the validity of those patents in the patent office or the courts. If these are
not resolved favorably, we may not be able to continue to develop and commercialize our product candidates. Even
if we were able to obtain rights to a third party’s intellectual property, these rights may be non-exclusive, thereby
giving our competitors potential access to the same intellectual property. If we are found liable for infringement or
are not able to have these patents declared invalid or unenforceable, we may be liable for significant monetary
damages, encounter significant delays in bringing products to market or be precluded from participating in the
manufacture, use or sale of products or methods of drug delivery covered by patents of others. Any litigation could
be costly and time-consuming and could divert the attention of our management and key personnel from our
business operations. We may not have identified, or be able to identify in the future, United States or foreign patents
that pose a risk of potential infringement claims. Ultimately, we may be unable to commercialize some of our
product candidates as a result of patent infringement claims, which could potentially harm our business.
In November 2008, Meridian Medical Technologies (“Meridian”) received U.S. Patent 7,449,012 (“the ‘012
patent”) relating to a specific type of auto injector for use with epinephrine. On August 28, 2009, King and
Meridian had filed suit against Teva in the U.S. District Court for the District of Delaware asserting its ‘012 patent.
On October 21, 2009, Teva filed its answer asserting non-infringement and invalidity of the ‘012 patent. On
November 3, 2011, Meridian and King requested to dismiss their claims against Teva involving the '012 patent, and
the Court entered the dismissal on November 7, 2011, removing the '012 patent from the litigation.
In September 2010, King received U.S. Patent No. 7,794,432 (“the ‘432 patent”) relating to certain features of
an auto injector for use with epinephrine. King and Meridian filed an amended complaint, in the same litigation as
the ‘012 patent, adding the ‘432 patent. Trial was held in February and March, 2012, and on April 26, 2012 the
Company announced that Meridian Medical Technologies, a Pfizer subsidiary, entered into a settlement agreement
with Teva that would resolve pending patent litigation related to its abbreviated new drug application (ANDA) for a
generic epinephrine auto injector. According to the terms of the settlement, Teva may launch a generic epinephrine
auto-injector covered by its ANDA on June 22, 2015 or earlier under certain circumstances, subject to receipt of
approval from the U.S. Food and Drug Administration.
Under a separate agreement, Teva has agreed to provide the Company with device orders of an undisclosed
amount in the years 2013 and 2014, to make a milestone payment to the Company upon FDA approval of
epinephrine auto-injector, and to assume all litigation costs related to the patent litigation between Teva and
Meridian Medical.
Although the litigation has been settled, there can be no assurance that the epinephrine auto injector product will
be approved by the FDA or that we will receive a milestone payment or royalties in the future under our agreement
with Teva.
38
Additionally, we are developing other products for Teva under the ANDA pathway and there can be no
assurance that those products do not follow the same type of litigation process of the epinephrine case which could
delay or prohibit the launch of those potential products.
If we do not have adequate insurance for product liability or clinical trial claims, then we may be subject to
significant expenses relating to these claims.
Our business entails the risk of product liability and clinical trial claims. Although we have not experienced any
material claims to date, any such claims could have a material adverse impact on our business. Insurance coverage
is expensive and may be difficult to obtain, and may not be available in the future on acceptable terms, or at all. We
maintain product and clinical trial liability insurance with coverage of $10 million per occurrence and an annual
aggregate maximum of $10 million and evaluate our insurance requirements on an ongoing basis. If we are subject
to a product liability claim, our product liability insurance may not reimburse us, or may not be sufficient to
reimburse us, for any expenses or losses that may have been suffered. A successful product liability claim against
us, if not covered by, or if in excess of our product liability insurance, may require us to make significant
compensation payments, which would be reflected as expenses on our statement of operations. Adverse claim
experience for our products or licensed technologies or medical device, pharmaceutical or insurance industry trends
may make it difficult for us to obtain product liability insurance or we may be forced to pay very high premiums,
and there can be no assurance that insurance coverage will continue to be available on commercially reasonable
terms or at all. Additionally, if the coverage limits of the product liability insurance are not adequate, a claim
brought against us, whether covered by insurance or not, could have a material adverse effect on our business,
results of operations, financial condition and cash flows.
If we make any acquisitions, we will incur a variety of costs and might never successfully integrate the acquired
product or business into ours.
We might attempt to acquire products or businesses that we believe are a strategic complement to our business
model. We might encounter operating difficulties and expenditures relating to integrating an acquired product or
business. These acquisitions might require significant management attention that would otherwise be available for
ongoing development of our business. In addition, we might never realize the anticipated benefits of any
acquisition. We might also make dilutive issuances of equity securities, incur debt or experience a decrease in cash
available for our operations, or incur contingent liabilities and/or amortization expenses relating to goodwill and
other intangible assets, in connection with future acquisitions.
Risks Related to Regulatory Matters
We or our licensees may incur significant time and costs seeking approval for our products, which could delay the
realization of revenue and, ultimately, decrease our revenues from such products.
The design, development, testing, manufacturing and marketing of pharmaceutical compounds and medical
devices are subject to regulation by governmental authorities, including the FDA and comparable regulatory
authorities in other countries. The approval process is generally lengthy, expensive and subject to unanticipated
delays. Currently we, along with our partners, are actively pursuing marketing approval for a number of products
from regulatory authorities in other countries and anticipate seeking regulatory approval from the FDA for products
developed internally and pursuant to our license agreements. In the future we, or our partners, may need to seek
approval for newly developed products. Our revenue and profit will depend, in part, on the successful introduction
and marketing of some or all of such products by our partners or us.
Applicants for FDA approval often must submit extensive clinical data and supporting information to the FDA.
Varying interpretations of the data obtained from pre-clinical and clinical testing could delay, limit or prevent
regulatory approval of a drug product. Changes in FDA approval policy during the development period, or changes
in regulatory review for each submitted NDA also may cause delays or rejection of an approval. Even if the FDA
approves a product, the approval may limit the uses or “indications” for which a product may be marketed, or may
require further studies. The FDA also can withdraw product clearances and approvals for failure to comply with
regulatory requirements or if unforeseen problems follow initial marketing.
39
We are developing our own combination products such as Vibex® QS T (testosterone) as well as injection
devices for use with our partner’s drugs. The regulatory path for approval of such combination products may be
subject to review by several centers within the FDA and although precedent and guidance exists for the requirements
for such combination products, there is no assurance that the FDA will not change what it requires or how it reviews
such submissions. Human clinical testing may be required by the FDA in order to commercialize these products and
devices and there can be no assurance that such trials will be successful. Such changes in review processes or the
requirement for clinical studies could delay anticipated launch dates or be at a cost which makes launching the
product or device cost prohibitive for ourselves or our partners. Such delay or failure to launch these products or
devices could adversely affect our revenues and future profitability.
In December 2008, one of our device partners, Teva, filed an ANDA for their epinephrine product. The ANDA
submission was accepted by the FDA. Teva is in the process of completing the work required for the submission.
The submission of the ANDA does not ensure that the FDA will approve the filing and without FDA approval we
cannot market or sell our injector for use with this drug product in the U.S.
In 2007, our partner Teva filed a second injector device with sumatriptan as an ANDA and the FDA rejected
such filing. The FDA’s rejection was based primarily on the opinion that the device was sufficiently different than
the innovator’s device not to warrant an ANDA. We redesigned the device to address the FDA’s concern of device
similarity and submitted the new device to the FDA. The FDA reactivated the ANDA file in 2010, and since that
time we have successfully completed user studies and are scaling up commercial tooling and molds for the newly
designed device. In the fourth quarter of 2013 we received a complete response letter from the FDA with additional
items to be addressed in our filing. We plan on submitting this new data in the first half of 2014 and then the FDA
is expected to complete its review of the ANDA, the timing of which is completely dependent on the FDA. The
submission of the requested data does not ensure that the FDA will approve the filing and without FDA approval we
cannot market or sell our injector for use with sumatriptan in the U.S.
In the second half of 2013, our partner Teva filed an ANDA for an undisclosed multidose pen product. The
ANDA submission has not been accepted to date by the FDA. The submission of the ANDA does not ensure that
the FDA will approve the filing and without FDA approval we cannot market or sell our injector for use with this
undisclosed drug product in the U.S.
In other jurisdictions, we, and the pharmaceutical companies with whom we are developing technologies (both
drugs and devices), must obtain required regulatory approvals from regulatory agencies and comply with extensive
regulations regarding safety and quality. If approvals to market the products are delayed, if we fail to receive these
approvals, or if we lose previously received approvals, our revenues may not materialize or may decline. We may
not be able to obtain all necessary regulatory approvals. Additionally, clinical data that we generate or obtain from
partners from FDA regulatory filings may not be sufficient for regulatory filings in other jurisdictions and we may
be required to incur significant costs in obtaining those regulatory approvals.
In 2012, our partner Daewoong filed with the regulatory agency in South Korea for approval of our oxybutynin
gel 3% product. We cannot offer any assurances or predict with any certainty as to when or if our oxybutynin gel
3% product will be approved for marketing in South Korea. If approval is delayed or is not received, we may not
realize any further revenues under this agreement.
The 505(b)(2) and 505(j) (ANDA) regulatory pathway for many of our potential products is uncertain and could
result in unexpected costs and delays of approvals.
Drug/device combination products indicated for the treatment of systemic or local treatments respectively are
regulated by the FDA in the U.S. and other similar regulatory agencies in other countries as drug products.
Drug/device combination products may not be marketed in the U.S. until they have been demonstrated to be safe
and effective. The regulatory approval routes for drug/device combination products include the filing of an NDA
for new drugs, new indications of approved drugs or new dosage forms of approved drugs. Alternatively, these
dosage forms can obtain marketing approval as a filing under Section 505(b)(2) where there is an acceptable
reference product or as a generic product by the filing of an ANDA, providing the new generic product is
bioequivalent to and has the same labeling as a comparable approved product. The combination of the drug, its
40
dosage form and label claims and FDA requirement will ultimately determine which regulatory approval route will
be required.
Many of our drug/device combination product candidates may be developed via the 505(b)(2) route. The
505(b)(2) regulatory pathway is continually evolving and advice provided in the present is based on current
standards, which may or may not be applicable when we potentially submit an NDA. Additionally, it is customary
to reference the most similar predicate products when submitting a 505(b)(2) application in order to potentially
reduce testing requirements. It is therefore probable that:
should a more appropriate reference product(s) be approved by the FDA at any time before or during the
review of our NDA, we would be required to submit a new application referencing the more appropriate
product;
the FDA cannot disclose whether such predicate product(s) is under development or has been submitted at
any time during another company’s review cycle.
Drug delivery systems such as injectors are reviewed by the FDA and may be legally marketed as a medical
device or may be evaluated as part of the drug approval process. Combination drug/device products raise unique
scientific, technical and regulatory issues. The FDA has established the OCP to address the challenges associated
with the review and regulation of combination products. The OCP assists in determining strategies for the approval
of drug/delivery combinations and assuring agreement within the FDA on review responsibilities. We may seek
approval for a product including an injector and a generic pharmaceutical by filing an ANDA claiming
bioequivalence and the same labeling as a comparable referenced product or as a filing under Section 505(b)(2) if
there is an acceptable reference product. In reviewing the ANDA filing, the agency may decide that the unique
nature of combination products allows them to dispute the claims of bioequivalence and/or same labeling resulting
in our re-filing the application under Section 505(b)(2). If such combination products require filing under Section
505(b)(2) we may incur delays in product approval and may incur additional costs associated with testing including
clinical trials. The result of an approval for a combination product under Section 505(b)(2) may result in additional
selling expenses and a decrease in market acceptance due to the lack of substitutability by pharmacies or
formularies.
If the use of our injection devices require additions to or modifications of the drug labeling regulated by the
FDA, the review of this labeling may be undertaken by the FDA’s Office of Surveillance and Epidemiology (OSE).
Additionally, the instructions for use (IFU) for a device in a drug/device combination product is also reviewed for
accuracy, ease of use and educational requirements. These reviews could increase the time needed for review
completion of a successful application and may require additional studies, such as usage studies, to establish the
validity of the instructions. Such reviews and requirement may extend the time necessary for the approval of drug-
device combinations. Such was the case for the approval of our needle-free device for use with hGH. The approval
process took much more time than contemplated.
Accordingly, these regulations and the FDA’s interpretation of them might impair our ability to obtain product
approval in a reasonable time, or at all, or effectively market our products.
Our business could be harmed if we fail to comply with regulatory requirements and, as a result, are subject to
sanctions.
If we, or pharmaceutical companies with whom we are developing technologies, fail to comply with applicable
regulatory requirements, the pharmaceutical companies, and we, may be subject to sanctions, including the
following:
fines;
product seizures, quarantines or recalls;
injunctions;
refusals to permit products to be imported into or exported out of the applicable regulatory jurisdiction;
total or partial suspension of production;
warning letters;
withdrawals of previously approved marketing applications; or
criminal prosecutions.
41
Any relationships with healthcare professionals, principal investigators, consultants, customers (actual and
potential) and third-party payors in connection with our current and future business activities are and will continue
to be subject, directly or indirectly, to federal and state healthcare fraud and abuse laws, false claims laws,
marketing expenditure tracking and disclosure (or “sunshine”) laws, government price reporting, and health
information privacy and security laws. If we are unable to comply, or have not fully complied, with such laws, we
could face penalties, contractual damages, reputational harm, diminished profits and future earnings.
Our business operations and activities may be directly, or indirectly, subject to various federal, state and local
fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute and the federal False Claims
Act. These laws may impact, among other things, our current activities with principal investigators and research
subjects, as well as proposed and future sales, marketing and education programs. In addition, we may be subject to
patient privacy regulation by the federal government, state governments and foreign jurisdictions in which we
conduct our business. The laws that may affect our ability to operate include, but are not limited to:
the federal Anti-Kickback Statute, which prohibits, among other things, knowingly and willfully soliciting,
receiving, offering or paying any remuneration (including any kickback, bribe or rebate), directly or
indirectly, overtly or covertly, in cash or in kind, to induce, or in return for, the referral of an individual for
the furnishing or arranging for the furnishing of any item or service, or the purchase, lease, order,
arrangement for, or recommendation of the purchase, lease, or order of any good, facility, item or service
for which payment may be made, in whole or in part, under a federal healthcare program, such as the
Medicare and Medicaid programs;
the civil federal False Claims Act, which imposes civil penalties, including through civil whistleblower or
qui tam actions, against individuals or entities for, among other things, knowingly presenting, or causing to
be presented, to the federal government, claims for payment that are false or fraudulent; knowingly making,
using or causing to be made or used, a false record or statement to get a false or fraudulent claim paid or
approved by the government; conspiring to defraud the government by getting a false or fraudulent claim
paid or approved by the government; or knowingly making, using or causing to be made or used a false
record or statement to avoid, decrease or conceal an obligation to pay money to the federal government;
the criminal federal False Claims Act, which imposes criminal fines or imprisonment against individuals or
entities who make or present of a claim to the government knowing such claim to be false, fictitious or
fraudulent;
the civil monetary penalties statute, which imposes penalties against any person or entity who, among other
things, is determined to have presented or caused to be presented a claim to a federal health program that
the person knows or should know is for an item or service that was not provided as claimed or is false or
fraudulent;
the Veterans Health Care Act of 1992 that requires manufacturers of “covered drugs” to offer them for sale
to certain federal agencies, including but not limited to, the Department of Veterans Affairs, on the Federal
Supply Schedule, which requires compliance with applicable federal procurement laws and regulations and
subjects manufacturers to contractual remedies as well as administrative, civil and criminal sanctions;
the federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, which created new
federal criminal statutes that prohibit knowingly and willfully executing, or attempting to execute, a
scheme to defraud any healthcare benefit program or obtain, by means of false or fraudulent pretenses,
representations or promises, any of the money or property owned by, or under the custody or control of,
any healthcare benefit program, regardless of the payor (e.g., public or private), knowingly and willfully
embezzling or stealing from a health care benefit program, willfully obstructing a criminal investigation of
a health care offense and knowingly and willfully falsifying, concealing or covering up by any trick or
device a material fact or making any materially false statements in connection with the delivery of, or
payment for, healthcare benefits, items or services relating to healthcare matters;
HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009,
or HITECH, and their respective implementing regulations, which impose requirements on certain covered
healthcare providers, health plans and healthcare clearinghouses as well as their respective business
associates that perform services for them that involve individually identifiable health information, relating
to the privacy, security and transmission of individually identifiable health information without appropriate
authorization, including mandatory contractual terms as well as directly applicable privacy and security
standards and requirements;
42
the federal Physician Payment Sunshine Act, created under the PPACA, and its implementing regulations
requires manufacturers of drugs, devices, biologicals and medical supplies for which payment is available
under Medicare, Medicaid or the Children’s Health Insurance Program (with certain exceptions) to report
annually to the United States Department of Health and Human Services, or HHS, information related to
payments or other transfers of value made to physicians (defined to include doctors, dentists, optometrists,
podiatrists and chiropractors) and teaching hospitals, as well as ownership and investment interests held by
physicians and their immediate family members, with data collection required beginning August 1, 2013
and reporting to CMS required by March 31, 2014 and by the 90th day of each subsequent calendar year;
federal consumer protection and unfair competition laws, which broadly regulate marketplace activities and
activities that potentially harm consumers;
federal government price reporting laws, changed by the PPACA to, among other things, increase the
minimum Medicaid rebates owed by most manufacturers under the Medicaid Drug Rebate Program and
offer such rebates to additional populations, that require us to calculate and report complex pricing metrics
to government programs, where such reported prices may be used in the calculation of reimbursement
and/or discounts on our marketed drugs. Participation in these programs and compliance with the
applicable requirements may subject us to potentially significant discounts on our products, increased
infrastructure costs and potentially limit our ability to offer certain marketplace discounts and failure to
report accurate pricing information exposes us to federal False Claims Act liability;
the Foreign Corrupt Practices Act, a United States law which regulates certain financial relationships with
foreign government officials (which could include, for example, certain medical professionals); and
state law equivalents of each of the above federal laws, such as anti-kickback, false claims, consumer
protection and unfair competition laws which may apply to our business practices, including but not limited
to, research, distribution, sales and marketing arrangements as well as submitting claims involving
healthcare items or services reimbursed by any third-party payors, including commercial insurers; state
laws that require pharmaceutical companies to comply with the pharmaceutical industry’s voluntary
compliance guidelines and the relevant compliance guidance promulgated by the federal government that
otherwise restricts payments that may be made to healthcare providers; state laws that require drug
manufacturers to file reports with states regarding marketing information, such as the tracking and
reporting of gifts, compensations and other remuneration and items of value provided to healthcare
professionals and entities (compliance with such requirements may require investment in infrastructure to
ensure that tracking is performed properly, and some of these laws result in the public disclosure of various
types of payments and relationships, which could potentially have a negative effect on our business and/or
increase enforcement scrutiny of our activities); and state laws governing the privacy and security of health
information in certain circumstances, many of which differ from each other in significant ways, with
differing effects.
Moreover, the recently enacted Drug Supply Chain Security Act imposes new obligations on manufacturers of
pharmaceutical products, among others, related to product tracking and tracing. Among the requirements of this
new legislation, manufacturers will be required to provide certain information regarding the drug products to
individuals and entities to which product ownership is transferred, label drug product with a product identifier, and
keep certain records regarding the drug product. The transfer of information to subsequent product owners by
manufacturers will eventually be required to be done electronically. Manufacturers will also be required to verify
that purchasers of the manufacturers' products are appropriately licensed. Further, under this new legislation,
manufactures will have drug product investigation, quarantine, disposition, and notification responsibilities related
to counterfeit, diverted, stolen, and intentionally adulterated products, as well as products that are the subject of
fraudulent transactions or which are otherwise unfit for distribution such that they would be reasonably likely to
result in serious health consequences or death.
Our revenues may be limited if the marketing claims asserted about our products are not approved.
Once a drug product is approved by the FDA, the Office of Prescription Drug Promotion (OPDP), the FDA’s
marketing surveillance department within the Center for Drug Evaluation and Research (CDER), must approve
marketing claims asserted by our pharmaceutical company partners. If we or a pharmaceutical company partner fails
to obtain from OPDP acceptable marketing claims for a product incorporating our drug technologies, our revenues
from that product may be limited. Marketing claims are the basis for a product’s labeling, advertising and
43
promotion. The claims the pharmaceutical company partners are asserting about our drug delivery technologies, or
the drug product itself, may not be approved by OPDP.
Risks Related to our Common Stock
Future conversions or exercises by holders of options could dilute our common stock.
As of March 4, 2014, we had options outstanding that are exercisable, at exercise prices ranging from $0.47 to
$4.57 per share, for an aggregate of approximately 7,200,000 shares of our common stock. Purchasers of our
common stock could therefore experience dilution of their investment upon exercise of the above options.
Sales of our common stock by our officers and directors may lower the market price of our common stock.
As of March 4, 2014, our officers and directors beneficially owned an aggregate of approximately 16,700,000
shares (or approximately 12.5%) of our outstanding common stock, including stock options exercisable within 60
days. If our officers and directors, or other stockholders, sell a substantial amount of our common stock, it could
cause the market price of our common stock to decrease.
We do not expect to pay dividends in the foreseeable future.
We intend to retain any earnings in the foreseeable future for our continued growth and, thus, do not expect to
declare or pay any cash dividends in the foreseeable future.
Anti-takeover effects of certain certificate of incorporation and bylaw provisions could discourage, delay or prevent
a change in control.
Our certificate of incorporation and bylaws could discourage, delay or prevent persons from acquiring or
attempting to acquire us. Our certificate of incorporation authorizes our board of directors, without action of our
stockholders, to designate and issue preferred stock in one or more series, with such rights, preferences and
privileges as the board of directors shall determine. In addition, our bylaws grant our board of directors the
authority to adopt, amend or repeal all or any of our bylaws, subject to the power of the stockholders to change or
repeal the bylaws. In addition, our bylaws limit who may call meetings of our stockholders.
Item 1B. UNRESOLVED STAFF COMMENTS
None.
Item 2.
PROPERTIES
We currently lease approximately 11,000 square feet of office space in Ewing, New Jersey for our corporate
headquarters facility. We have amended the lease to add approximately 2,700 square feet, which we expect will be
ready for occupancy in April 2014. This lease will terminate in October 2019. We believe the facility will be
sufficient to meet our requirements for the foreseeable future.
We currently lease approximately 9,300 square feet of office, laboratory and manufacturing space in Plymouth,
a suburb of Minneapolis, Minnesota. In November 2013, we exercised an early termination option under which we
must exit our current Plymouth location by August 31, 2014. In December 2013, we entered into a lease agreement
for approximately 18,000 square feet of office, laboratory and manufacturing space in a new Plymouth location,
which we expect will be ready for occupancy in April 2014. This lease will terminate in March 2022. We believe
the facility will be sufficient to meet our requirements at this time.
We also lease a small amount of office space in Muttenz, Switzerland. The lease is month-to-month and
requires a three month notice prior to termination. We believe the facilities will be sufficient to meet our
requirements through the lease period at this location.
44
Item 3.
LEGAL PROCEEDINGS
On March 7, 2014, Medac Pharma and Medac GmbH (together, “Medac”) filed suit against Antares, LEO
Pharma and its parent company LEO Pharma A/S (together, “LEO Entities”) in the United State District Court for
the District of New Jersey, alleging that Antares and LEO Entities infringe on Medac’s U.S. Patent 8,664,231 (the
“231 patent”) that was issued by the U.S. Patent and Trademark Office on March 4, 2014. The complaint states that
the 231 patent covers a method for the treatment of inflammatory autoimmune disease, comprising subcutaneously
administering to a patient a medicament comprising methotrexate in a pharmaceutically acceptable solvent at a
concentration of more than 30mg/mL. Medac alleges that OTREXUP™ infringes the 231 patent, and demands that
we and LEO Entities be enjoined from making, using, selling, importing or offering OTREXUP™ and pay
unspecified amount of compensatory damages, treble damages and attorneys’ fees. We believe Medac’s allegations
are without merit and intend to defend ourselves vigorously.
Item 4. MINE SAFETY DISCLOSURES
Not applicable.
45
PART II
Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND
ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock began trading on the NASDAQ Capital Market on June 15, 2012 under the symbol
“ATRS”. Prior to that time, our common stock traded on the NYSE Amex under the symbol “AIS”. The following
table sets forth the per share high and low closing sales prices of our common stock for each quarterly period during
the two most recent fiscal years.
2013:
First Quarter
Second Quarter
Third Quarter
Fourth Quarter
2012:
First Quarter
Second Quarter
Third Quarter
Fourth Quarter
High
Low
$
$
$
$
$
$
$
$
4.30
4.20
4.58
4.69
3.32
3.71
5.32
4.40
$
$
$
$
$
$
$
$
3.36
3.43
3.96
3.64
2.05
2.72
3.67
3.59
Common Shareholders
As of February 28, 2014, we had 84 shareholders of record of our common stock as well as approximately
20,000 shareholders in street name.
Dividends
We have not paid or declared any cash dividends on our common stock during the past ten years. We have no
intention of paying cash dividends in the foreseeable future on our common stock.
46
Performance Graph
The graph below provides an indication of cumulative total stockholder returns (“Total Return”) for the
Company as compared with the NASDAQ Composite Index, the NASDAQ Biotechnology Stock Index, the Amex
Composite Index, and the Amex Biotechnology Stock Index weighted by market value at each measurement point.
Our common stock began trading on the NASDAQ Capital Market on June 15, 2012 and prior to that time was
traded on NYSE Amex. For this reason, we are comparing Total Returns for the Company to indexes from both
NASDAQ and NYSE Amex. The graph covers the period beginning December 31, 2008, through December 31,
2013. The graph assumes $100 was invested in each of our common stock, the NASDAQ Composite Index, the
NASDAQ Biotechnology Stock Index, the Amex Composite Index, and the Amex Biotechnology Stock Index on
December 31, 2008 (based upon the closing price of each). Total Return assumes reinvestment of dividends.
$1,400.00
$1,200.00
$1,000.00
$800.00
$600.00
$400.00
$200.00
$0.00
2008
31‐Dec
2009
31‐Dec
2010
31‐Dec
2011
31‐Dec
2012
31‐Dec
2013
31‐Dec
Antares Pharma
NASDAQ Composite Index
NASDAQ Biotechnology Stock Index
AMEX Composite Index
2008
2009
December 31,
2011
2010
2012
2013
Antares Pharma, Inc.
$ 100.00
$ 308.11
$ 459.46
$ 594.59
$ 1,029.73
$ 1,208.11
NASDAQ Composite Index
100.00
143.89
168.22
165.19
191.47
264.84
NASDAQ Biotechnology
Stock Index
100.00
115.63
132.98
148.69
Amex Composite Index
100.00
130.58
158.02
163.03
196.12
168.56
324.80
173.61
Amex Biotechnology Stock
Index
100.00
145.58
200.51
168.65
239.05
360.10
47
Item 6.
SELECTED FINANCIAL DATA
The following table summarizes certain selected financial data. The selected financial data is derived from, and is
qualified by reference to, our audited consolidated financial statements for the years ended December 31, 2013,
2012, 2011, 2010 and 2009 and should be read in conjunction with those statements (amounts expressed in
thousands, except per share amounts).
2013
2012
2011
2010
2009
At December 31,
Balance Sheet Data:
$
Cash and cash equivalents
Investments
Working capital
Total assets
Long-term liabilities, less current maturities
Accumulated deficit
Total stockholders’ equity
39,067
30,022
56,297
88,932
1,855
(173,296)
70,714
$
$
52,097
33,129
69,721
95,527
1,038
(152,789)
86,551
19,358
15,038
26,257
41,963
810
(141,362)
31,144
$
9,848
-
5,804
15,141
1,843
(136,974 )
6,627
$
13,559
-
8,307
19,143
2,051
(130,883)
8,851
Year Ended December 31,
2013
2012
2011
2010
2009
Statement of Operations Data:
Product sales
Development revenue
Licensing fees
Royalties
Revenues
Cost of product sales
Cost of development revenue
Research and development
Sales and marketing
General and administrative
Operating expenses
Operating loss
Net other income (expense)
Net loss before income taxes
Income tax provision (benefit)
Net loss applicable to common shares
$
10,958
$
9,138
$
7,630
$
5,774
$
4,139
849
4,672
20,618
6,990
2,207
15,263
8,714
8,294
32,271
(20,850)
43
(20,807)
(300)
$ (20,507)
7,422
2,141
3,874
4,462
1,221
3,145
2,127
2,856
2,062
22,575
16,458
12,819
6,117
3,403
14,921
1,413
8,172
24,506
3,623
3,174
6,699
-
7,399
2,799
1,474
8,803
-
5,769
14,098
14,572
(11,451)
24
(11,427)
-
(4,437)
49
(4,388)
-
(6,026 )
(65 )
(6,091 )
-
3,506
2,607
1,595
603
8,311
1,813
2,327
7,903
-
5,962
13,865
(9,694)
(597)
(10,291)
-
$ (11,427) $
(4,388)
$
(6,091 )
$ (10,291)
Net loss per common share (1) (2)
$
(0.16)
$
(0.10) $
(0.05)
$
(0.07 )
$
(0.14)
Weighted average number of common shares
126,897
110,185
96,995
83,170
73,489
(1) Basic and diluted loss per share amounts are identical as the effect of potential common shares is anti-dilutive.
(2) We have not paid any dividends on our common stock since inception.
48
Item 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF
OPERATIONS
You should read the following discussion in conjunction with Item 1A. (“Risk Factors”) and our audited consolidated financial
statements included elsewhere in this annual report. Some of the statements in the following discussion are forward-looking
statements. See the discussion about forward-looking statements in Item 1. (“Business”) and “Forward-Looking Statements in
Management’s Discussion and Analysis.”
Forward-Looking Statements in Management’s Discussion and Analysis
Management’s discussion and analysis of the significant changes in the consolidated results of operations,
financial condition and cash flows of the Company is set forth below. Certain statements in this report may be
considered to be “forward-looking statements” as that term is defined in the U.S. Private Securities Litigation
Reform Act of 1995, such as statements that include the words “expect,” “estimate,” “project,” “anticipate,”
“should,” “intend,” “probability,” “risk,” “target,” “objective” and other words and terms of similar meaning in
connection with any discussion of, among other things, future operating or financial performance, strategic
initiatives and business strategies, regulatory or competitive environments, our intellectual property and product
development. In particular, these forward-looking statements include, among others, statements about:
our expectations regarding commercialization of OTREXUP™ (Vibex® MTX);
our expectations regarding product development of Vibex® QS T;
our expectations regarding continued product development with Teva;
our plans regarding potential manufacturing and marketing partners;
our future cash flow;
the impact of new accounting pronouncements; and
our expectations regarding the year ending December 31, 2014.
The words “may,” “will,” “expect,” “intend,” “anticipate,” “estimate,” “believe,” “continue,” and similar
expressions may identify forward-looking statements, but the absence of these words does not necessarily mean that
a statement is not forward-looking. Forward-looking statements involve known and unknown risks, uncertainties
and achievements, and other factors that may cause our or our industry’s actual results, levels of activity,
performance, or achievements to be materially different from the information expressed or implied by these
forward-looking statements. While we believe that we have a reasonable basis for each forward-looking statement
contained in this report, we caution you that these statements are based on a combination of facts and factors
currently known by us and projections of the future about which we cannot be certain. Many factors may affect our
ability to achieve our objectives, including:
delays in product introduction and marketing or interruptions in supply;
a decrease in business from our major customers and partners;
our inability to compete successfully against new and existing competitors or to leverage our research and
development capabilities and our marketing capabilities;
our inability to effectively market our services or obtain and maintain arrangements with our customers,
partners and manufacturers;
our inability to attract and retain key personnel;
adverse economic and political conditions; and
our inability to obtain additional financing, reduce expenses or generate funds when necessary.
In addition, you should refer to the “Risk Factors” section of this Form 10-K report for a discussion of other
factors that may cause our actual results to differ materially from those described by our forward-looking statements.
As a result of these factors, we cannot assure you that the forward-looking statements contained in this report will
prove to be accurate and, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material.
We encourage readers of this report to understand forward-looking statements to be strategic objectives rather
than absolute targets of future performance. Forward-looking statements speak only as of the date they are made.
We do not intend to update publicly any forward-looking statements to reflect circumstances or events that occur
after the date the forward-looking statements are made or to reflect the occurrence of unanticipated events except as
49
required by law. In light of the significant uncertainties in these forward-looking statements, you should not regard
these statements as a representation or warranty by us or any other person that we will achieve our objectives and
plans in any specified time frame, if at all.
The following discussion and analysis, the purpose of which is to provide investors and others with information
that we believe to be necessary for an understanding of our financial condition, changes in financial condition and
results of operations, should be read in conjunction with the financial statements, notes and other information
contained in this report.
Overview
Antares Pharma, Inc. is an emerging specialty pharmaceutical company that focuses on developing and
commercializing self-administered parenteral pharmaceutical products and technologies. We have numerous
partnerships with pharmaceutical companies as well as multiple internal product development programs. We have
developed both subcutaneous and intramuscular injection technology systems which include Vibex® disposable
pressure-assisted auto injectors, reusable needle-free injectors, and disposable multi-use pen injectors.
On October 14, 2013 we announced the approval of OTREXUP™ (methotrexate) injection by the FDA, and in
January 2014 we announced the launch of OTREXUP™. OTREXUP™ is the first FDA approved subcutaneous
methotrexate for once weekly self-administration with an easy-to-use, single dose, disposable auto injector.
OTREXUP™ is indicated for adults with severe active rheumatoid arthritis (“RA”) or children with active
polyarticular juvenile idiopathic arthritis and adults with severe recalcitrant psoriasis. We have worldwide
marketing rights for OTREXUP™ and will commercialize OTREXUP™ on our own in the U.S. for the treatment of
RA and we have provided LEO Pharma the exclusive right to commercialize OTREXUP™ in the U.S. for the
treatment of psoriasis.
We are also developing Vibex® QS T for testosterone replacement therapy for men suffering from symptomatic
testosterone deficiency. In February 2014 we announced positive top line results from a clinical study evaluating
the PK of testosterone enanthate administered weekly by subcutaneous injection at doses of 50 mg and 100 mg via
the VIBEX® QS T auto injector device in hypogonadal adult males. The study enrolled 39 patients at nine
investigative sites in the United States. The results are considered positive in that Vibex® QS T treatment resulted
in most patients achieving average levels of testosterone within the normal range from the first dose onward.
Vibex® QS T was also safe and well tolerated by all dosed patients. We intend to begin a Phase 3 clinical study in
2014 to validate our results in a larger group of hypogonadal men over an extended period of at-home weekly
dosing.
We have licensed our reusable needle-free injection device for use with human growth hormone (“hGH”) to
Teva Pharmaceutical Industries, Ltd. (“Teva”), Ferring Pharmaceuticals BV (“Ferring”) and JCR Pharmaceuticals
Co., Ltd. (“JCR”), with Teva and Ferring being two of our primary customers. Our needle-free injection device is
marketed by Teva as the Tjet® injector system to administer their 5mg Tev-Tropin® brand hGH marketed in the U.S.
Our needle-free injection device is marketed by Ferring with their 4mg and 10mg hGH formulations as Zomajet® 2
Vision and Zomajet® Vision X, respectively, in Europe and Asia. We have also licensed both disposable auto and
pen injection devices to Teva for use in certain fields and territories and are engaged in product development
activities for Teva utilizing these devices.
We also have a portfolio of gel-based products. We announced with Actavis on April 26, 2012, the launch of
Gelnique 3%™, our topical oxybutynin gel product for the treatment of overactive bladder (“OAB”), which was
approved by the FDA in December 2011. We have a licensing agreement with Actavis under which Actavis is
currently marketing Gelnique 3%™ in the U.S. In January 2012, we entered into a licensing agreement with
Daewoong Pharmaceuticals under which Daewoong will commercialize this product, once approved in South Korea.
Our gel portfolio also includes Elestrin® (estradiol gel) currently marketed by Meda Pharma in the U.S. for the
treatment of moderate-to-severe vasomotor symptoms associated with menopause.
We have two facilities in the U.S. The Parenteral Products Group located in Minneapolis, Minnesota directs the
manufacturing and marketing of our reusable needle-free injection devices and related disposables, and develops our
disposable pressure-assisted auto injector and pen injector systems. Our corporate head office, Product
50
Development Group and Commercial Group are located in Ewing, New Jersey, where the Product Development
Group directs the clinical, regulatory and pre-commercial development of our internal drug/device combination
products. Our Commercial Group is responsible for sales, marketing, medical affairs, trade, and third party
reimbursement for our internally developed products.
Critical Accounting Policies and Use of Estimates
In preparing the consolidated financial statements in conformity with U.S. generally accepted accounting
principles (GAAP), management must make decisions that impact reported amounts and related disclosures. Such
decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which
to base accounting estimates. In reaching such decisions, management applies judgment based on its understanding
and analysis of relevant circumstances. Note 2 to the consolidated financial statements provides a summary of the
significant accounting policies followed in the preparation of the consolidated financial statements. The following
accounting policies are considered by management to be the most critical to the presentation of the consolidated
financial statements because they require the most difficult, subjective and complex judgments.
Revenue Recognition
A significant portion of our revenue relates to product sales for which revenue is recognized upon shipment,
with limited judgment required related to product returns. Product sales are shipped FOB shipping point. We also
enter into arrangements that are often complex as they may involve license, development, manufacturing and
commercialization components. Licensing and development revenue recognition requires significant management
judgment to evaluate the effective terms of agreements, our performance commitments and determination of fair
value of the various deliverables under the arrangement. Current applicable accounting standards require a vendor
to allocate revenue to each unit of accounting in arrangements involving multiple deliverables. To separate
deliverables into individual units of accounting, there must be evidence of standalone selling price for each
deliverable. The evidence preferred includes either vendor specific objective evidence or third party evidence, but a
vendor is allowed to make its best estimate of the standalone selling price when neither of these is available.
We have deferred revenue amounts of $6,386,416 at December 31, 2013, where non-refundable cash payments
have been received, but the revenue is not immediately recognized due to the nature of the respective agreements.
Subsequent factors affecting the initial estimate of the effective terms of agreements could either increase or
decrease the period over which the deferred revenue is recognized.
Due to the requirement to defer significant amounts of revenue and the extended period over which the revenue
will be recognized, along with the requirement to recognize certain deferred development costs over an extended
period of time, revenue recognized and cost of revenue may be materially different from cash flows.
On an overall basis, our reported revenues can differ significantly from billings and/or accrued billings based on
terms in agreements with customers. The table below is presented to help explain the impact of the deferral of
revenue on reported revenues, and is not meant to be a substitute for accounting or presentation requirements under
U.S. generally accepted accounting principles.
Product sales
Development fees
Licensing fees and milestone payments
Royalties
Billings received and/or accrued per contract
Deferred billings received and/or accrued
Deferred revenue recognized
Total revenue as reported
2013
$ 10,957,932
3,561,063
5,200,000
4,671,711
24,390,706
(7,629,270)
3,857,064
$ 20,618,500
2012
$ 9,137,573
4,054,993
2,215,716
3,874,284
19,282,566
(3,075,758 )
6,368,770
$22,575,578
2011
$ 7,630,402
3,986,564
3,200,000
3,144,980
17,961,946
(5,138,081)
3,634,627
$ 16,458,492
51
Valuation of Long-Lived and Intangible Assets and Goodwill
Long-lived assets, including patent rights, are reviewed for impairment whenever events or changes in
circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. Recoverability of
assets to be held and used is measured by a comparison of the carrying amount of an asset to future net cash flows
expected to be generated by the asset or asset group. This analysis can be very subjective as we rely upon signed
distribution or license agreements with variable cash flows to substantiate the recoverability of long-lived assets. If
such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the
carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower
of the carrying amount or fair value less costs to sell.
Each year we review patent costs for impairment and identify patents related to products for which there are no
signed distribution or license agreements or for which no revenues or cash flows are anticipated. No impairment
charges were recognized in 2013, 2012 or 2011. The gross carrying amount and accumulated amortization of
patents, which are our only intangible assets subject to amortization, were $2,635,706 and $1,290,529, respectively,
at December 31, 2013 and were $2,244,086 and $1,120,434, respectively, at December 31, 2012. The Company’s
estimated aggregate patent amortization expense for the next five years is $145,000, $152,000, $160,000, $160,000
and $160,000 in 2014, 2015, 2016, 2017 and 2018, respectively.
We have $1,095,355 of goodwill recorded as of December 31, 2013 that relates to our Minnesota operations.
We evaluate the carrying amount of goodwill on December 31 of each year and between annual evaluations if
events occur or circumstances change that would more likely than not reduce the fair value of the reporting unit
below its carrying amount. Such circumstances could include, but are not limited to: (1) a significant adverse change
in legal factors or in business climate, (2) unanticipated competition, (3) an adverse action or assessment by a
regulator, or (4) a sustained significant drop in our stock price. When evaluating whether goodwill is impaired, we
compare the fair value of the Minnesota reporting unit to the carrying amount, including goodwill. If the carrying
amount of the Minnesota reporting unit exceeds its fair value, then the amount of the impairment loss must be
measured. The impairment loss would be calculated by comparing the implied fair value of goodwill to its carrying
amount. In calculating the implied fair value of goodwill, the fair value of the Minnesota reporting unit would be
allocated to all of its other assets and liabilities based on their fair values. The excess of the fair value of the
Minnesota reporting unit over the amount assigned to its other assets and liabilities is the implied fair value of
goodwill. An impairment loss would be recognized when the carrying amount of goodwill exceeds its implied fair
value.
In evaluating whether the fair value of the Minnesota reporting unit was below its carrying amount, we used the
market capitalization of the Company at December 31, 2013, which was approximately $575 million, to calculate an
estimate of fair value of the Minnesota reporting unit. We determined that the percentage of the total market
capitalization of the Company at December 31, 2013 attributable to the Minnesota reporting unit would have to be
unreasonably low before the fair value of the Minnesota reporting unit would be less than its carrying amount. In
making this determination, we evaluated the activity at the Minnesota reporting unit compared to the total Company
activity, and considered the source and potential value of agreements currently in place, the source of recent product
sales and development revenue growth, the source of total Company revenue and the source of cash generating
activities. After performing the market capitalization analysis and concluding that the fair value of the Minnesota
reporting unit was not below its carrying amount, we determined that no further detailed determination of fair value
was required.
Our evaluation of goodwill completed during 2013, 2012 and 2011 resulted in no impairment losses.
52
Results of Operations
Years Ended December 31, 2013, 2012 and 2011
Revenues
Total revenue was $20,618,500, $22,575,578 and $16,458,492 for the years ended December 31, 2013, 2012
and 2011, respectively.
Product sales were $10,957,932, $9,137,573 and $7,630,402 for the years ended December 31, 2013, 2012 and
2011, respectively. Product sales in 2013 included $6,204,000 of initial sales to Teva of our Vibex® auto injector for
Teva’s generic epinephrine auto injector product. In 2013 and 2012, product sales included approximately $500,000
and $3,100,000, respectively, of sales of our topical oxybutynin gel 3% product to Actavis in connection with their
launch of Gelnique 3% in April 2012, which was the primary reason for the increase in product sales in 2012
compared to 2011. Product sales to Actavis ended in the first quarter of 2013, as Actavis assumed all manufacturing
of Gelnique 3% in 2013 as contracted. A portion of our product sales in 2013 and 2012 also included sales of pre-
commercial auto injector and/or pen injector devices to Teva. The balance of our product sales in each year
consisted mainly of reusable needle-free injector devices and disposable components. Our sales of reusable needle-
free injector devices and disposable components are generated primarily from sales to Ferring and Teva. Ferring
uses our needle-free injector with their 4mg and 10mg hGH formulations marketed as Zomajet® 2 Vision and
Zomajet® Vision X, respectively, in Europe and Asia. Teva uses our Tjet® needle-free device with their 5mg hGH
Tev-Tropin® marketed in the U.S. In 2013, 2012 and 2011, revenue from sales of needle-free injector devices
totaled $1,278,586, $1,285,042 and $2,054,315, respectively. Sales of disposable components in 2013, 2012 and
2011 totaled $2,059,420, $4,047,895 and $5,457,621, respectively. The 2013 and 2012 decreases in sales of devices
and disposable components were due to decreases in sales to both Ferring and Teva. Sales of the hGH drug product
for both Ferring and Teva continue to be strong, but we do not control our partners’ inventory levels of our hGH
injectors or disposable components and this can cause significant fluctuations in product sales.
Development revenue was $4,139,672, $7,422,412 and $4,462,287 for the years ended December 31, 2013,
2012 and 2011, respectively. The development revenue in 2013 and 2012 included $3,974,879 and $3,627,157,
respectively, related to the Teva auto injector and pen injector programs. The revenue in 2012 also included
$2,764,234 recognized under our license agreement with Actavis, $750,000 earned when Pfizer achieved a
development milestone related to its undisclosed Consumer Healthcare product, and amounts earned under various
other agreements. The revenue in 2011 included $2,083,977 and $1,314,069 related to the Teva auto injector and
pen injector programs, respectively. The development revenue related to the pen injector program in 2011 included
the recognition of $304,600 of previously deferred development revenue in connection with an amendment, in the
first quarter of 2011, to a license, development and supply agreement with Teva originally entered into in December
of 2007. In addition, the 2011 development revenue included $1,024,240 earned under the Actavis license
agreement.
Licensing revenue was $849,185, $2,141,309 and $1,220,823 for the years ended December 31, 2013, 2012 and
2011, respectively. The licensing revenue in 2013 was primarily due to revenue recognized in connection with our
license and promotion agreement with LEO Pharma executed in November of 2013. The licensing revenue in 2012
was primarily due to an upfront license fee received in connection with our licensing agreement with Daewoong
signed in January of 2012 and revenue recognized in connection with our license agreement with Actavis. The
licensing revenue in 2011 was primarily due to an upfront payment from Pfizer associated with a license agreement
entered into in December 2011. The licensing revenue in each year also included revenue recognized that was
previously deferred in connection with license agreements with Teva, Ferring and other customers.
Royalty revenue was $4,671,711, $3,874,284 and $3,144,980 for the years ended December 31, 2013, 2012 and
2011, respectively. We receive royalties from Teva and Ferring related to needle-free injector device sales and/or
hGH sales, from Meda Pharma on sales of Elestrin® and from Actavis on sales of Gelnique 3%. In 2013, 2012 and
2011 our royalties related to needle-free injector device sales and/or hGH sales accounted for approximately 66%,
71% and 91%, respectively, of our overall royalty revenue. We received our first royalty payments from Actavis in
2012, which was the primary reason for the increase in royalties in 2012 compared to 2011. The increase in
royalties in 2013 was spread relatively evenly among each of our three products.
53
Cost of Revenues and Gross Margins
The cost of product sales includes product acquisition costs from third party manufacturers and internal
manufacturing overhead expenses. Cost of product sales were $6,990,186, $6,116,726 and $3,623,186 for the years
ended December 31, 2013, 2012 and 2011, respectively, resulting in gross margins of 36%, 33% and 53%,
respectively. The slight gross margin increase in 2013 was due to the significant reduction in sales of our topical
oxybutynin gel 3% product to Actavis, which was sold at a lower gross margin than is realized on injector related
product sales. This gross margin increase was partially offset by the gross margin impact of the increase in initial
sales to Teva of pre-launch quantities of our Vibex® auto injector for Teva’s generic epinephrine auto injector
product, which was sold at a lower gross margin than our other injector related products but at a slightly higher gross
margin than our oxybutynin gel 3% product. The gross margin decrease in 2012 was due primarily due to sales of
approximately $3,100,000 of our topical oxybutynin gel 3% product to Actavis at a lower gross profit than is
realized on injector related product sales.
The cost of development revenue consists primarily of direct external costs, some of which may have been
previously incurred and deferred. Cost of development revenue was $2,207,044, $3,403,746 and $3,174,006 for the
years ended December 31, 2013, 2012 and 2011, respectively. Approximately $2,105,000, $2,760,000 and
$2,128,000 of development costs were recognized in 2013, 2012 and 2011, respectively, in connection with revenue
recognized related to auto injector and pen injector development programs with Teva. Of the amount recognized in
2011, $408,250 had been previously deferred and was recognized as a result of the amended license, development
and supply agreement with Teva, as discussed in Note 9 to the consolidated financial statements. In 2012 and 2011,
development costs of approximately $589,000 and $1,024,000, respectively, were related to certain manufacturing
readiness activities under the Actavis license agreement.
Research and Development
Research and development expenses consist of external costs for studies and analysis activities, design work
and prototype development, and salaries and overhead costs. Research and development expenses were
$15,263,371, $14,921,552 and $6,699,325 for the years ended December 31, 2013, 2012 and 2011, respectively.
External expenses in connection with development of OTREXUP™ totaled approximately $3,000,000, $7,600,000
and $2,000,000 in 2013, 2012 and 2011, respectively. The expenses in 2012 included a fee of approximately
$2,000,000 paid in connection with the New Drug Application submitted to the FDA in December 2012. External
expenses in connection with development of Vibex® QS T for testosterone replacement therapy totaled
approximately $3,400,000, $900,000 and $0 in 2013, 2012 and 2011, respectively. Personnel costs were
approximately $5,900,000, $4,500,000 and $3,000,000 in 2013, 2012 and 2011, respectively. The increases were
primarily due to the addition of new employees. The balance of the research and development expenses in each year
consisted of external expenses in connection with other development projects and general operating and overhead
expenses associated with research and development activities.
Sales and Marketing
Sales and marketing expenses were $8,714,461, $1,412,565 and $0 for the years ended December 31, 2013,
2012 and 2011, respectively. Expenses related to OTREXUP™ market research, product branding and pre-
commercialization activities were approximately $6,700,000 and $600,000 in 2013 and 2012, respectively.
Personnel costs were approximately $1,800,000 and $710,000 in 2013 and 2012, respectively. The increase in
personnel costs was the result of hiring new employees as we continued to build our sales and marketing
organization in connection with commercialization of OTREXUP™. The balance of the sales and marketing
expenses in each year consisted of general operating and overhead expenses associated with sales and marketing
activities. We expect sales and marketing costs in 2014 to be two to three times higher than the 2013 level in
connection with the launch and commercialization of OTREXUP™.
General and Administrative
General and administrative expenses were $8,293,755, $8,172,488 and $7,398,762 for the years ended
December 31, 2013, 2012 and 2011, respectively. Personnel costs were approximately $4,400,000, $3,700,000 and
$3,500,000 for 2013, 2012 and 2011, respectively. The increases were due to the addition of new employees,
54
increases in noncash stock compensation expenses and salary increases. Board of Director compensation expenses
were approximately $1,100,000, $1,100,000 and $650,000 for 2013, 2012 and 2011, respectively. Expenses in
connection with our intellectual property totaled approximately $1,000,000, $1,100,000 and $900,000 in 2013, 2012
and 2011, respectively. Professional fees including audit, tax, legal and other consulting services totaled
approximately $600,000, $1,100,000 and $1,200,000 in 2013, 2012 and 2011, respectively. The balance of the
general and administrative expenses consists of general operating and overhead expenses. Noncash stock
compensation expenses, which are included in both personnel costs and director compensation expenses, were
approximately $1,600,000, $1,500,000 and $1,400,000 in 2013, 2012 and 2011, respectively.
Liquidity and Capital Resources
We have reported net losses of $20,506,776, $11,427,450 and $4,387,920 in the fiscal years ended 2013, 2012
and 2011, respectively. We have accumulated aggregate net losses from the inception of business through
December 31, 2013 of $173,295,941. We have not historically generated, and do not currently generate, enough
revenue to provide the cash needed to support our operations, and have continued to operate primarily by raising
capital.
In 2013, we received proceeds of $2,326,838 from the exercise of warrants and stock options, which resulted in
the issuance of 2,452,254 shares of our common stock.
In 2012, we sold 14,259,868 shares of common stock at a price of $4.00 per share in a public offering. The sale
of common stock resulted in net proceeds of $53,328,188 after deducting offering expenses of $3,711,284. Proceeds
from this offering were raised for further development and commercialization of OTREXUP™, development of the
Company’s proprietary VIBEX® QS T product for male testosterone deficiency and general corporate purposes.
In 2012, we received proceeds of $11,579,413 from the exercise of warrants and stock options, which resulted
in the issuance of 8,021,672 shares of our common stock.
In May 2011, we received net proceeds of $21,280,718 from the sale of 14,375,000 shares of common stock at a
price of $1.60 per share in a public offering. Proceeds from this offering were used for development of
OTREXUP™ and for general corporate purposes.
In 2011, we received proceeds of $6,020,436 in connection with exercises of options and warrants to purchase
shares of our common stock, which resulted in the issuance of 4,475,335 shares of our common stock.
At December 31, 2013 we had cash and investments of $69,089,710. All investments are U.S. Treasury bills or
U.S. Treasury notes which we intend to hold to maturity. We believe that the combination of our current cash and
investments balances and projected product sales, product development, license revenues, milestone payments and
royalties will provide us with sufficient funds to support operations. We do not currently have any bank credit lines.
If in the future we do not turn profitable or generate cash from operations as anticipated and additional capital is
needed to support operations, we may be unable to obtain such financing, or obtain it on favorable terms, in which
case we may be required to curtail development of new products, limit expansion of operations or accept financing
terms that are not as attractive as we may desire.
Net Cash Used in Operating Activities
Operating cash inflows are generated primarily from product sales, license and development fees and royalties.
Operating cash outflows consist principally of expenditures for manufacturing costs, general and administrative
costs, research and development projects including clinical studies, and sales, marketing and business development
activities. Net cash used in operating activities was $14,968,151, $10,472,988 and $1,926,007 for the years ended
December 31, 2013, 2012 and 2011, respectively. Net operating cash outflows were primarily the result of net
losses of $20,506,776, $11,427,450 and $4,387,920 in 2013, 2012 and 2011, respectively, adjusted by noncash
expenses and changes in operating assets and liabilities.
In 2013, the net loss increased by $9,079,326 to $20,506,776 from $11,427,450 in 2012. This increase was
primarily due to an increase in sales and marketing spending associated with the commercialization of OTREXUP™
55
of approximately $6,100,000, an increase in personnel costs of approximately $3,300,000 associated mainly with
employee additions related to increased sales and marketing and research and development activities, and a
reduction in gross profit of approximately $1,600,000. The increase in the net loss was partially reduced by a
decrease in external direct research and development expenses of approximately $2,000,000.
In 2012, the net loss increased by $7,039,530 to $11,427,450 from $4,387,920 in 2011 primarily due to an
increase in spending associated with OTREXUP™ of approximately $5,600,000, including a $2,000,000 NDA
filing fee, and an increase in personnel costs of approximately $3,500,000 associated mainly with employee
additions related to increased research and development activities. The increase in the net loss due to the increase in
expenses was partially reduced by an increase in gross profit of approximately $3,300,000.
Noncash expenses totaled $3,203,597, $2,375,989 and $2,010,945 in 2013, 2012 and 2011, respectively. The
increase in 2013 was primarily due to an increase in stock-based compensation expense of $409,728, an increase in
depreciation and amortization of $327,252 and an increase in amortization of premiums and discounts of $143,733.
The increase in depreciation and amortization was due to depreciation of OTREXUP™ production equipment which
began in 2013 and due to an increase in patent amortization. The increase in 2012 was primarily due to an increase
in stock-based compensation expense of $152,760 and due to the loss on disposal of equipment, molds, furniture and
fixtures of $119,429 related mainly to the write off of a tool replacement.
In 2013, the change in operating assets and liabilities generated cash of $2,335,028. This was mainly due to an
increase in accounts payable of $2,528,740, accrued expenses and other liabilities of $2,534,293 and deferred
revenue of $3,196,862, partially offset by an increase in inventories of $5,460,365. Accounts payable and accrued
expenses increased at December 31, 2013 compared to December 31, 2012 mainly in connection with
commercialization activities and inventory production in preparation for the launch of OTREXUP™. The increase
in deferred revenue was primarily related to the $5,000,000 payment received from LEO Pharma in November 2013.
In 2012, the change in operating assets and liabilities used cash of $1,421,527. This use of cash was mainly due
to a decrease in deferred revenue of $3,340,951, partially offset by an increase in accrued expenses and other current
liabilities of $687,297 and an increase in accounts payable of $724,802. Deferred revenue decreased primarily due
to recognition of amounts received and deferred in 2011 under our license agreement with Actavis and amounts
recognized under pen and auto injector development programs with Teva. The increases in accrued expenses and
other current liabilities and accounts payable were affected by overall company growth which included personnel
additions and increases in operating activities, particularly research and development activities.
In 2011, the change in operating assets and liabilities generated cash of $450,968. The primary reasons for this
were an increase in deferred revenue of $1,543,840, which was due mainly to a payment received from Actavis and
payments from Teva that together exceeded amounts recognized as revenue during 2011 that had been deferred in
prior years, and increases in accounts payable and accrued expenses and other current liabilities that totaled
$772,346, partially offset by an increase in accounts receivable of $1,300,995 and an increase in inventories of
$629,510. The receivable increase was due to billings to Ferring and Teva in December for product shipments and
development work, nearly all of which was collected in January 2012. The inventory increase was due to timing of
production of devices and disposable components for order fulfillment in early 2012, along with raw material
inventory purchased for production of Gelnique 3%™ launch quantities.
Net Cash Used in Investing Activities
In 2013, cash used in investing activities was $293,121, consisting of purchases of investments of $21,129,535,
purchases of equipment, molds, furniture and fixtures of $2,743,253, additions to patent rights of $420,333, and
proceeds from maturities of investments of $24,000,000. In 2012, cash used in investing activities was $21,667,632,
consisting of purchases of investments of $30,166,239, purchases of equipment, molds, furniture and fixtures of
$3,256,632, additions to patent rights of $244,761, and proceeds from maturities of investments of $12,000,000.
The purchases of equipment, molds, furniture and fixtures in 2013 and 2012 were primarily for OTREXUP™ auto
injector device molds and assembly equipment. In 2011, cash used in investing activities was $15,605,780,
consisting of purchases of investments of $15,053,981, additions to patent rights of $231,260, purchases of
equipment, molds, furniture and fixtures of $350,539, and net proceeds from sales of equipment, molds, furniture
and fixtures of $30,000. The investment purchases in 2013, 2012 and 2011 were U.S. Treasury bills or U.S.
56
Treasury notes with maturity dates of less than twenty-four months at date of purchase and were classified as held-
to-maturity because we had the positive intent and ability to hold the securities to maturity.
Net Cash Provided by Financing Activities
Net cash provided by financing activities totaled $2,222,509, $64,878,685 and $27,067,863 for the years ended
December 31, 2013, 2012 and 2011. In 2013, we received proceeds of $2,326,838 from the exercise of warrants
and stock options, and we made payments of $104,329 for employee withholding taxes on net share settlement of
equity awards. In 2012, we received net proceeds of $53,328,188 from the sale of common stock and $11,579,413
from the exercise of warrants and stock options, and we made payments of $28,916 for employee withholding taxes
on net share settlement of equity awards. In 2011, we received net proceeds of $21,280,718 from the sale of
common stock and $6,020,436 from the exercise of warrants and stock options, and we made payments of $233,291
for employee withholding taxes on net share settlement of equity awards. A portion of shares held by employees
that vested in 2013, 2012 and 2011 were net-share settled such that the Company withheld shares with value
equivalent to the employees’ minimum statutory obligation for the applicable income and other employment taxes,
and remitted the cash to the appropriate taxing authorities. The total shares withheld were 30,153, 11,165 and
121,182 in 2013, 2012 and 2011, respectively, and were based on the value of the shares on their vesting date as
determined by the Company’s closing stock price.
Our contractual cash obligations at December 31, 2013 are associated with operating leases and are summarized
in the following table:
Total contractual cash obligations
Total
$ 3,824,013
Off Balance Sheet Arrangements
Less than
1 year
$ 437,288
Payment Due by Period
1-3
years
$1,151,345
3-5
years
$ 1,197,459
After 5 years
$ 1,037,921
We do not have any off-balance sheet arrangements, including any arrangements with any structured finance,
special purpose or variable interest entities.
Research and Development Programs
During 2013, our research and development activities were primarily related to OTREXUP™, Vibex® QS T
and device development projects.
OTREXUP™. OTREXUP™, our proprietary combination product comprised of a pre-filled methotrexate
syringe and our Medi-Jet™ self-injection system, is indicated for adults with severe active rheumatoid arthritis or
children with active polyarticular juvenile idiopathic arthritis and adults with severe recalcitrant psoriasis. In
January 2014 we announced the launch of OTREXUP™ after receiving approval of OTREXUP™ (methotrexate)
injection by the FDA in October 2013. OTREXUP™ is the first FDA approved subcutaneous methotrexate for once
weekly self-administration with an easy-to-use, single dose, disposable auto injector.
In December 2012, we submitted a New Drug Application to the FDA for OTREXUP™, which NDA was
accepted for filing in February 2013. In November 2012, we announced positive results from an open-label,
randomized, crossover study comparing the systemic availability of OTREXUP™ to oral methotrexate in adult
patients with rheumatoid arthritis. This study was designed to compare the relative systemic availability of
methotrexate following oral administration to subcutaneous (SC) self-administered methotrexate using the Medi-
Jet™ device. Patients were assigned to one of four dose levels of methotrexate, 10 mg, 15 mg, 20 mg, and 25 mg.
Results showed that the systemic availability of methotrexate following oral dosing plateaus above 15 mg.
Following administration of methotrexate with Medi-Jet™, the systemic availability increased proportionally at
every dose, which will extend the range of exposure compared to patients receiving oral therapy.
In September 2012, we announced positive results from an actual human use study in 101 RA patients. The
results of this study showed that self-administration of MTX using the Vibex® MTX (Medi-Jet™) is safe and well
57
tolerated. Following standardized training by site personnel and review of written instructions, all 101 patients
performed the self-administration successfully. In addition, the Medi-Jet™ device functioned correctly and as
intended for each and every administration thereby demonstrating reliability and robustness. Results of the Ease of
Use Questionnaire indicated that 98% of patients found the Medi-Jet™ device easy to use and 100% of patients
found the instructions and training to be clear and easy to follow.
In June 2012, we announced positive results from a human factors usability study for our Medi-Jet™
methotrexate injection system. Fifty individuals representing three user groups participated in this study, including
17 RA patients, 16 lay caregivers and 17 healthcare professionals.
In August 2011, we announced positive results from a clinical PK study initiated in the first quarter of 2011
evaluating OTREXUP™. The clinical study evaluated several dose strengths of methotrexate delivered with our
Medi-Jet™ versus conventional needle and syringe administration by a healthcare professional.
As of December 31, 2013, we have incurred external costs of approximately $13,100,000 in connection with
our OTREXUP™ development program, of which approximately $3,000,000 and $7,600,000 was incurred in 2013
and 2012, respectively, including in 2012 approximately $2,000,000 paid in connection with the New Drug
Application submitted to the FDA in December 2012. We have also incurred costs of approximately $5,800,000 for
molds and equipment that have been capitalized and included in equipment, molds, furniture and fixtures at
December 31, 2013. In addition, we incurred costs in connection with market research, product branding and pre-
commercialization activities in 2013 of approximately $6,700,000.
Vibex® QS T. We are developing Vibex® QS T for self-administered weekly injections of testosterone
enanthate in a preservative free formulation for clinically hypogonadal men requiring testosterone replacement. The
Vibex® QS T injector is based on our Vibex® QS auto injector system which offers a dose capacity of 1 mL and
greater in a compact design. Vibex® QS is designed to enhance performance on the attributes most critical to patient
acceptance - speed, comfort and discretion. Vibex® QS achieves these advancements by incorporating a novel
triggering mechanism and space-saving spring configuration. The new design also accommodates fast injection of
highly-viscous drug products, such as testosterone, that stall less-powerful conventional auto injectors.
In September 2013, we announced that the first patients were dosed in a clinical study evaluating the PK of
testosterone enanthate administered weekly by subcutaneous injection at doses of 50 mg and 100 mg via the
VIBEX® QS T auto injector device in hypogonadal adult males. The study enrolled 39 patients at nine investigative
sites in the United States. We announced our top line results of this study on February 20, 2014. The results are
considered positive in that Vibex® QS T treatment resulted in most patients achieving average levels of testosterone
within the normal range from the first dose onward. Vibex® QS T was also safe and well tolerated by all dosed
patients. We intend to begin Phase 3 clinical study in 2014 to validate our results in a larger group of hypogonadal
men over an extended period of at-home weekly dosing.
In addition to collecting PK, efficacy and safety information, the phase 3study will also collect Actual Human
Use experience with the device from the approximately 200 hypogonadal male patients that will receive Vibex® QS
T for home use. The study will assess the safe usability of Vibex® QS T for self-administration following
standardized training by site personnel and review of written instructions. Additional assessments will include
reliability, ease of use, robustness of Vibex® QS T, as well as an evaluation of the effectiveness of the patient
education tools, including written instructions for use.
We have incurred external costs of approximately $3,400,000 and $937,000 in 2013 and 2012, respectively, in
connection with the Vibex® QS T program. We anticipate total spending on this program for development and
capital equipment could approach an additional $13,000,000 in 2014.
Device Development Projects. We are also engaged in research and development activities related to our
Vibex® disposable pressure-assisted auto injectors and our disposable pen injectors. We have signed license
agreements with Teva for our Vibex® system for use with epinephrine and sumatriptan and for our pen injector
device for two undisclosed products. Our pressure-assisted auto injectors are designed to deliver drugs by injection
from single-dose prefilled syringes. The auto injectors are in the advanced commercial stage of development. The
disposable pen injector device is designed to deliver drugs by injection through needles from multi-dose cartridges.
58
The disposable pen is in the stage of development where devices are being evaluated in user studies and stability
programs. Our development programs consist of the determination of the device design, development of prototype
tooling, production of prototype devices for testing and clinical studies, performance of clinical studies, and
development of commercial tooling and assembly.
As of December 31, 2013, we have incurred total external costs of approximately $14,700,000 in connection
with research and development activities associated with our auto and pen injectors, of which approximately
$3,000,000 was incurred in 2013. As of December 31, 2013, approximately $11,500,000 of the total costs of
$14,700,000 was initially deferred, of which approximately $11,100,000 has been recognized as cost of sales and
$400,000 remains deferred. This remaining deferred balance will be recognized as cost of sales over the same
period as the related deferred revenue will be recognized.
The development timelines of the auto and pen injectors related to the Teva products are controlled by Teva.
We expect development related to the Teva products to continue in 2014, but the timing and extent of near-term
future development will be dependent on certain decisions made by Teva. Although certain upfront, milestone and
development payments and device sales have been received from Teva, there have been no commercial sales from
the auto injector or pen injector programs, timelines have been extended and there can be no assurance that there
ever will be commercial sales or future milestone payments under these agreements.
Other research and development costs. In addition to the OTREXUP™ project, Vibex® QS T project and
the Teva related device development projects, we incur direct costs in connection with other research and
development projects related to our technologies and indirect costs that include salaries, administrative and other
overhead costs of managing our research and development projects. Total other research and development costs
were approximately $8,100,000 for the year ended December 31, 2013.
Recently Issued Accounting Pronouncements
In July 2013, the FASB issued Accounting Standards Update 2013-11, “Presentation of an Unrecognized Tax
Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists” (“ASU
2013-11”). ASU 2013-11 amends accounting guidance on the presentation of an unrecognized tax benefit when a
net operating loss carryforward, a similar tax loss, or tax credit carryforward exists. This new guidance requires
entities, if certain criteria are met, to present an unrecognized tax benefit, or portion of an unrecognized tax benefit,
in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax
loss, or a tax credit carryforward when such items exist in the same taxing jurisdiction. The adoption of ASU 2013-
11 is expected to reduce diversity in practice by providing guidance on the presentation of unrecognized tax
benefits. The provisions of ASU 2013-11 are effective for fiscal years and interim periods beginning after
December 15, 2013. We do not expect the adoption of this update to have a material effect on our consolidated
financial statements.
Item 7(A). QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Our primary market risk exposure is foreign exchange rate fluctuations of the Swiss Franc to the U.S. dollar as
the financial position and operating results of our subsidiaries in Switzerland are translated into U.S. dollars for
consolidation. Our exposure to foreign exchange rate fluctuations also arises from transferring funds to our Swiss
subsidiaries in Swiss Francs. In addition, we have exposure to exchange rate fluctuations between the Euro and the
U.S. dollar in connection with a licensing agreement with Ferring, under which certain products sold to Ferring and
royalties are denominated in Euros. Most of our product sales, including a portion of our product sales to Ferring,
and our development and licensing fees and royalties are denominated in U.S. dollars, thereby significantly
mitigating the risk of exchange rate fluctuations on trade receivables. We do not currently use derivative financial
instruments to hedge against exchange rate risk. The effect of foreign exchange rate fluctuations on our financial
results for the years ended December 31, 2013, 2012 and 2011 was not material.
We also have limited exposure to market risk due to interest income sensitivity, which is affected by changes in
the general level of U.S. interest rates, particularly because a significant portion of our investments are in debt
securities issued by the U.S. government and institutional money market funds. The primary objective of our
investment activities is to preserve principal. To minimize market risk, we have in the past and, to the extent
59
possible, will continue in the future, to hold debt securities to maturity at which time the debt security will be
redeemed at its stated or face value. Due to the nature of our marketable securities, we believe that we are not
exposed to any material market interest rate risk related to our investment portfolio.
60
Item 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
ANTARES PHARMA, INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Report of Independent Registered Public Accounting Firm
Consolidated Balance Sheets as of December 31, 2013 and 2012
Consolidated Statements of Operations for the Years Ended December 31, 2013, 2012 and 2011
Consolidated Statements of Comprehensive Loss for the Years Ended December 31, 2013, 2012 and 2011
Consolidated Statements of Stockholders’ Equity for the Years Ended December 31, 2013, 2012 and 2011
Consolidated Statements of Cash Flows for the Years Ended December 31, 2013, 2012 and 2011
Notes to Consolidated Financial Statements
62
63
64
65
66
67
68
61
Report of Independent Registered Public Accounting Firm
The Board of Directors and Stockholders
Antares Pharma, Inc.:
We have audited the accompanying consolidated balance sheets of Antares Pharma, Inc. and subsidiaries (the
Company) as of December 31, 2013 and 2012, and the related consolidated statements of operations, comprehensive
loss, stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2013.
We also have audited the Company’s internal control over financial reporting as of December 31, 2013, based on
criteria established in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring
Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these
consolidated financial statements, for maintaining effective internal control over financial reporting, and for its
assessment of the effectiveness of internal control over financial reporting, included in the accompanying
Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an
opinion on these consolidated financial statements and an opinion on the Company’s internal control over financial
reporting based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board
(United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about
whether the financial statements are free of material misstatement and whether effective internal control over
financial reporting was maintained in all material respects. Our audits of the consolidated financial statements
included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements,
assessing the accounting principles used and significant estimates made by management, and evaluating the overall
financial statement presentation. Our audit of internal control over financial reporting included obtaining an
understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and
testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our
audits also included performing such other procedures as we considered necessary in the circumstances. We believe
that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance
regarding the reliability of financial reporting and the preparation of financial statements for external purposes in
accordance with generally accepted accounting principles. A company’s internal control over financial reporting
includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail,
accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable
assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance
with generally accepted accounting principles, and that receipts and expenditures of the company are being made
only in accordance with authorizations of management and directors of the company; and (3) provide reasonable
assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s
assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.
Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become
inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may
deteriorate.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the
financial position of Antares Pharma, Inc. and subsidiaries as of December 31, 2013 and 2012, and the results of
their operations and their cash flows for each of the years in the three-year period ended December 31, 2013, in
conformity with U.S. generally accepted accounting principles. Also in our opinion, Antares Pharma, Inc. and
subsidiaries maintained, in all material respects, effective internal control over financial reporting as of December
31, 2013, based on criteria established in Internal Control – Integrated Framework (1992) issued by the Committee
of Sponsoring Organizations of the Treadway Commission.
Minneapolis, Minnesota
March 13, 2014
/s/ KPMG LLP
62
ANTARES PHARMA, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
Assets
Current Assets:
Cash and cash equivalents
Short term investments
Accounts receivable
Inventories
Deferred costs
Prepaid expenses and other current assets
Total current assets
Equipment, molds, furniture and fixtures, net
Patent rights, net
Goodwill
Long term investments
Other assets
December 31,
December 31,
2013
2012
$
39,067,236
24,014,305
1,034,492
6,461,051
375,773
1,706,678
72,659,535
6,952,251
1,345,177
1,095,355
6,008,169
871,444
$
52,097,064
21,112,623
2,228,650
1,002,703
755,159
463,033
77,659,232
3,583,104
1,123,652
1,095,355
12,015,906
49,361
Total Assets
$
88,931,931
$
95,526,610
Liabilities and Stockholders’ Equity
Current Liabilities:
Accounts payable
Accrued expenses and other liabilities
Deferred revenue
Total current liabilities
Deferred revenue – long term
Total liabilities
Stockholders’ Equity:
$
$
6,378,712
5,453,075
4,531,220
16,363,007
1,855,196
18,218,203
2,864,507
2,916,700
2,157,016
7,938,223
1,037,795
8,976,018
Preferred Stock: $0.01 par; authorized 3,000,000 shares, none outstanding
Common Stock: $0.01 par; authorized 200,000,000 shares;
128,740,604 and 125,949,024 issued and outstanding at
December 31, 2013 and 2012, respectively
Additional paid-in capital
Accumulated deficit
Accumulated other comprehensive loss
-
-
1,287,406
243,375,465
(173,295,941 )
(653,202 )
1,259,490
238,745,612
(152,789,165)
(665,345)
86,550,592
95,526,610
Total Liabilities and Stockholders’ Equity
70,713,728
88,931,931
$
$
See accompanying notes to consolidated financial statements.
63
ANTARES PHARMA, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
Revenue:
Product sales
Development revenue
Licensing revenue
Royalties
Total revenue
Cost of revenue:
Cost of product sales
Cost of development revenue
Total cost of revenue
Gross profit
Operating expenses:
Research and development
Sales and marketing
General and administrative
Total operating expenses
$
Years Ended December 31,
2013
2012
2011
$
$
10,957,932
4,139,672
849,185
4,671,711
20,618,500
6,990,186
2,207,044
9,197,230
11,421,270
15,263,371
8,714,461
8,293,755
32,271,587
9,137,573
7,422,412
2,141,309
3,874,284
22,575,578
6,116,726
3,403,746
9,520,472
13,055,106
14,921,552
1,412,565
8,172,488
24,506,605
7,630,402
4,462,287
1,220,823
3,144,980
16,458,492
3,623,186
3,174,006
6,797,192
9,661,300
6,699,325
-
7,398,762
14,098,087
Operating loss
(20,850,317)
(11,451,499 )
(4,436,787)
Other income (expense):
Interest income
Foreign exchange gain (loss)
Other, net
Total other income (expense)
Net loss before income taxes
Income tax provision (benefit)
Net loss
Basic and diluted net loss per common share
111,577
(8,853)
(59,183)
43,541
(20,806,776)
(300,000)
(20,506,776)
63,195
14,414
(53,560 )
24,049
(11,427,450 )
-
$
(11,427,450 ) $
55,592
(19,784)
13,059
48,867
(4,387,920)
-
(4,387,920)
(0.16)
$
(0.10 ) $
(0.05)
$
$
Basic and diluted weighted average common shares
outstanding
126,897,247
110,185,077
96,994,779
See accompanying notes to consolidated financial statements.
64
ANTARES PHARMA, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS
Years Ended December 31,
2013
2012
2011
Net loss
$
(20,506,776)
$
(11,427,450 ) $
(4,387,920)
Foreign currency translation adjustment
12,143
(70,020 )
(35,488)
Comprehensive loss
$
(20,494,633)
$
(11,497,470 )
$
(4,423,408)
See accompanying notes to consolidated financial statements.
65
ANTARES PHARMA, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
Years Ended December 31, 2011, 2012 and 2013
December 31, 2010
Issuance of common stock
Exercise of warrants and options
Stock-based compensation
Net loss
Other comprehensive loss
December 31, 2011
Issuance of common stock
Exercise of warrants and options
Stock-based compensation
Net loss
Other comprehensive loss
December 31, 2012
Exercise of warrants and options
Stock-based compensation
Net loss
Other comprehensive loss
December 31, 2013
Accumulated
Other
Comprehensive
Income (Loss)
(559,837 ) $
Total
Stockholders’
Equity
6,626,618
21,280,718
-
6,020,436
-
1,639,481
-
(4,387,920)
-
(35,488)
(35,488 )
(595,325 ) 31,143,845
53,328,188
-
11,579,413
-
1,996,616
-
(11,427,450)
-
(70,020)
(70,020 )
(665,345 ) 86,550,592
2,326,838
2,330,931
(20,506,776)
12,143
(653,202 ) $ 70,713,728
-
-
-
12,143
Common Stock
Number
of
Shares
84,157,865 $
14,375,000
4,475,335
537,437
-
-
103,545,637
14,259,868
8,021,672
121,847
-
-
125,949,024
2,452,254
339,326
-
-
Additional
Paid-In
Capital
Accumulated
Deficit
Amount
(141,361,715)
-
-
-
(4,387,920)
-
841,579 $ 143,318,671 $ (136,973,795) $
143,750
44,753
5,374
-
-
1,035,456
142,599
80,217
1,218
-
-
1,259,490
24,523
3,393
-
-
21,136,968
5,975,683
1,634,107
-
-
172,065,429
53,185,589
11,499,196
1,995,398
-
-
238,745,612
2,302,315
2,327,538
-
-
-
-
-
(11,427,450)
-
-
-
(20,506,776)
-
(152,789,165)
128,740,604 $ 1,287,406 $ 243,375,465 $ (173,295,941) $
See accompanying notes to consolidated financial statements.
66
ANTARES PHARMA, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
Cash flows from operating activities:
Net loss
Adjustments to reconcile net loss to net
cash used in operating activities:
Depreciation and amortization
Loss (gain) on disposal of equipment, molds, furniture
and fixtures
Stock-based compensation expense
Amortization of premiums and discounts
Changes in operating assets and liabilities:
Accounts receivable
Inventories
Prepaid expenses and other current assets
Deferred costs
Other assets
Accounts payable
Accrued expenses and other current liabilities
Deferred revenue
Net cash used in operating activities
Cash flows from investing activities:
Purchase of investments
Proceeds from maturities of investments
Proceeds from sales of equipment, molds, furniture and
fixtures
Purchases of equipment, molds, furniture and fixtures
Additions to patent rights
Net cash used in investing activities
Cash flows from financing activities:
Proceeds from issuance of common stock, net
Proceeds from exercise of warrants and stock options
Taxes paid from net share settlement of equity awards
Net cash provided by financing activities
Effect of exchange rate changes on cash and cash equivalents
Net increase (decrease) in cash and cash equivalents
Cash and cash equivalents:
Beginning of year
End of year
Noncash investing activities:
Years Ended December 31,
2013
2012
2011
$ (20,506,776)
$ (11,427,450 )
$
(4,387,920)
558,280
231,028
168,173
-
2,435,260
210,057
1,198,643
(5,460,365)
(1,222,962)
381,792
(821,975)
2,528,740
2,534,293
3,196,862
(14,968,151)
119,429
2,025,532
66,324
310,813
(118,365 )
(177,714 )
444,279
(18,012 )
724,802
687,297
(3,340,951 )
(10,472,988 )
(30,000)
1,872,772
9,761
(1,300,995)
(629,510)
(156,571)
212,097
-
365,522
406,824
1,543,840
(1,926,007)
(21,129,535)
24,000,000
(30,166,239 )
12,000,000
(15,053,981)
-
-
(2,743,253)
(420,333)
(293,121)
-
(3,256,632 )
(244,761 )
(21,667,632 )
30,000
(350,539)
(231,260)
(15,605,780)
-
2,326,838
(104,329)
2,222,509
8,935
(13,029,828)
53,328,188
11,579,413
(28,916 )
64,878,685
1,067
32,739,132
21,280,718
6,020,436
(233,291)
27,067,863
(25,957)
9,510,119
52,097,064
$ 39,067,236
19,357,932
$ 52,097,064
9,847,813
$ 19,357,932
Purchases of equipment, molds, furniture and fixtures
recorded in accounts payable and accrued expenses
$
985,365
$
-
$
-
See accompanying notes to consolidated financial statements.
67
ANTARES PHARMA, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. Description of Business
Antares Pharma, Inc. (the “Company” or “Antares”) is an emerging specialty pharmaceutical company that
focuses on developing and commercializing self-administered parenteral pharmaceutical products and technologies.
The Company has numerous partnerships with pharmaceutical companies as well as multiple internal product
development programs. The Company has developed both subcutaneous and intramuscular injection technology
systems which include Vibex® disposable pressure-assisted auto injectors, reusable needle-free injectors, and
disposable multi-use pen injectors.
On October 14, 2013, the Company announced the approval of OTREXUP™ (methotrexate) injection by the
FDA, and in January 2014 announced the product launch of OTREXUP™. OTREXUP™ is the first FDA approved
subcutaneous methotrexate for once weekly self-administration with an easy-to-use, single dose, disposable auto
injector. OTREXUP™ is indicated for adults with severe active rheumatoid arthritis (“RA”) or children with active
polyarticular juvenile idiopathic arthritis and adults with severe recalcitrant psoriasis. The Company has worldwide
marketing rights for OTREXUP™. The Company will commercialize OTREXUP™ in the U.S. for the treatment of
RA and has provided LEO Pharma the exclusive right to commercialize OTREXUP™ in the U.S. for the treatment
of psoriasis.
The Company is also developing Vibex® QS T for testosterone replacement therapy for men suffering from
symptomatic testosterone deficiency. In February 2014 the Company announced positive top line results from a
clinical study evaluating the PK of testosterone enanthate administered weekly by subcutaneous injection at doses of
50 mg and 100 mg via the VIBEX® QS T auto injector device in hypogonadal adult males. The study enrolled 39
patients at nine investigative sites in the United States. The results are considered positive in that Vibex® QS T
treatment resulted in most patients achieving average levels of testosterone within the normal range from the first
dose onward. Vibex® QS T was also safe and well tolerated by all dosed patients. The Company intends to begin a
Phase 3 clinical study in 2014 to validate the results in a larger group of hypogonadal men over an extended period
of at-home weekly dosing.
The Company has licensed its reusable needle-free injection device for use with human growth hormone
(“hGH”) to Teva Pharmaceutical Industries, Ltd. (“Teva”), Ferring Pharmaceuticals BV (“Ferring”) and JCR
Pharmaceuticals Co., Ltd. (“JCR”), with Teva and Ferring being two of the Company’s primary customers. The
Company’s needle-free injection device is marketed by Teva as the Tjet® injector system to administer their 5mg
Tev-Tropin® brand hGH marketed in the U.S. The Company’s needle-free injection device is marketed by Ferring
with their 4mg and 10mg hGH formulations as Zomajet® 2 Vision and Zomajet® Vision X, respectively, in Europe
and Asia. The Company has also licensed both disposable auto and pen injection devices to Teva for use in certain
fields and territories and is engaged in product development activities for Teva utilizing these devices.
The Company also has a portfolio of gel-based products. The Company announced with Actavis on April 26,
2012, the launch of Gelnique 3%™, the Company’s topical oxybutynin gel product for the treatment of overactive
bladder (“OAB”), which was approved by the FDA in December 2011. The Company has a licensing agreement
with Actavis under which Actavis is currently marketing Gelnique 3%™ in the U.S. In January 2012, the Company
entered into a licensing agreement with Daewoong Pharmaceuticals under which Daewoong will commercialize this
product, once approved in South Korea. The Company’s gel portfolio also includes Elestrin® (estradiol gel)
currently marketed by Meda Pharma in the U.S. for the treatment of moderate-to-severe vasomotor symptoms
associated with menopause.
The Company has two facilities in the U.S. The Parenteral Products Group located in Minneapolis, Minnesota
directs the manufacturing and marketing of the Company’s reusable needle-free injection devices and related
disposables, and develops its disposable pressure-assisted auto injector and pen injector systems. The Company’s
corporate head office, Product Development Group and Commercial Group are located in Ewing, New Jersey,
where the Product Development Group directs the clinical, regulatory and commercial development of the
Company’s internal drug/device combination products. Our Commercial Group is responsible for sales, marketing,
medical affairs, trade and third party reimbursement for our internally developed products.
68
2. Summary of Significant Accounting Policies
Basis of Presentation
The accompanying consolidated financial statements include the accounts of Antares Pharma, Inc. and its three
wholly-owned subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.
Certain prior year amounts have been reclassified in the consolidated financial statements to conform to the
current year presentation. These reclassifications were made to present sales and marketing as a separate line item
as the Company commences commercialization of OTREXUP™. Business development expenses previously
included within sales, marketing and business development have been reclassified to general and administrative
expense. These reclassifications had no effect on previously reported net income or total operating expenses.
Use of Estimates
The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting
principles requires management to make estimates and assumptions that affect the reported amounts of assets and
liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported
amounts of revenues and expenses during the reporting period. The Company’s significant accounting estimates
relate to the revenue recognition periods for license revenues, product warranty accruals and determination of the
fair value and recoverability of goodwill and patent rights. Actual results could differ from these estimates.
Foreign Currency Translation
The majority of the foreign subsidiaries revenues are denominated in U.S. dollars, and any required funding of
the subsidiaries is provided by the U.S. parent. Nearly all operating expenses of the foreign subsidiaries, including
labor, materials, leasing arrangements and other operating costs, are denominated in Swiss Francs. Additionally,
bank accounts held by foreign subsidiaries are denominated in Swiss Francs, there is a low volume of intercompany
transactions and there is not an extensive interrelationship between the operations of the subsidiaries and the parent
company. As such, the Company has determined that the Swiss Franc is the functional currency for its foreign
subsidiaries. The reporting currency for the Company is the United States Dollar (“USD”). The financial statements
of the Company’s foreign subsidiaries are translated into USD for consolidation purposes. All assets and
liabilities are translated using period-end exchange rates and statements of operations items are translated using
average exchange rates for the period. The resulting translation adjustments are recorded as a separate component of
stockholders’ equity, comprising all of the accumulated other comprehensive income (loss). Sales to certain
customers by the U.S. parent are in currencies other than the U.S. dollar and are subject to foreign currency
exchange rate fluctuations. Foreign currency transaction gains and losses are included in foreign exchange gain
(loss) in the consolidated statements of operations.
Cash Equivalents
The Company considers highly liquid debt instruments with original maturities of 90 days or less to be cash
equivalents.
Allowance for Doubtful Accounts
Trade accounts receivable are stated at the amount the Company expects to collect. The Company maintains
allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required
payments. The Company considers the following factors when determining the collectability of specific customer
accounts: customer credit-worthiness, past transaction history with the customer, current economic industry trends,
and changes in customer payment terms. The Company’s accounts receivable balance is typically due from its large
pharmaceutical customers such as Teva and Ferring, and at December 31, 2013, over 95% of the accounts receivable
balance was due from these organizations. These companies have historically paid timely and have been financially
stable organizations. Due to the nature of the accounts receivable balance, the Company believes the risk of
doubtful accounts is minimal. If the financial condition of the Company’s customers were to deteriorate, adversely
affecting their ability to make payments, additional allowances would be required. The Company provides for
69
estimated uncollectible amounts through a charge to earnings and a credit to a valuation allowance. Balances that
remain outstanding after the Company has used reasonable collection efforts are written off through a charge to the
valuation allowance and a credit to accounts receivable. The Company recorded no bad debt expense in each of the
last three years. The allowance for doubtful accounts balance was $10,000 at December 31, 2013 and 2012.
Inventories
Inventories are stated at the lower of cost or market. Cost is determined on a first-in, first-out basis. Certain
components of the Company’s products are provided by a limited number of vendors, and the Company’s
production and assembly operations are outsourced to third-party suppliers where substantially all of the Company’s
inventory is located. Disruption of supply from key vendors or third-party suppliers may have a material adverse
impact on the Company’s operations.
Equipment, Molds, Furniture, and Fixtures
Equipment, molds, furniture, and fixtures are stated at cost and are depreciated using the straight-line method
over their estimated useful lives ranging from three to ten years. Depreciation expense was $359,471, $145,775 and
$86,636 for the years ended December 31, 2013, 2012 and 2011, respectively.
Goodwill
The Company has $1,095,355 of goodwill recorded as of December 31, 2013 that relates to the Minnesota
reporting unit. The Company evaluates the carrying amount of goodwill on December 31 of each year and between
annual evaluations if events occur or circumstances change that would more likely than not reduce the fair value of
the Minnesota reporting unit below its carrying amount. Such circumstances could include, but are not limited to: (1)
a significant adverse change in legal factors or in business climate, (2) unanticipated competition, (3) an adverse
action or assessment by a regulator, or (4) a sustained significant drop in the Company’s stock price. When
evaluating whether goodwill is impaired, the Company compares the fair value of the Minnesota reporting unit to
the carrying amount, including goodwill. If the carrying amount of the Minnesota reporting unit exceeded its fair
value, then the amount of the impairment loss would be measured. The impairment loss would be calculated by
comparing the implied fair value of goodwill to its carrying amount. In calculating the implied fair value of
goodwill, the fair value of the Minnesota reporting unit would be allocated to all of its other assets and liabilities
based on their fair values. The excess of the fair value of the Minnesota reporting unit over the amount assigned to
its other assets and liabilities is the implied fair value of goodwill. An impairment loss would be recognized when
the carrying amount of goodwill exceeds its implied fair value.
In evaluating whether the fair value of the Minnesota reporting unit was below its carrying amount, the
Company used the market capitalization of the Company at December 31, 2013, which was approximately $575
million, to calculate an estimate of fair value of the Minnesota reporting unit. The Company determined that the
percentage of the total market capitalization of the Company at December 31, 2013 attributable to the Minnesota
reporting unit would have to be unreasonably low before the fair value of the Minnesota reporting unit would be less
than its carrying amount. In making this determination, the Company evaluated the activity at the Minnesota
reporting unit compared to the total Company activity, and considered the source and potential value of agreements
currently in place, the source of recent product sales and development revenue growth, the source of total Company
revenue and the source of cash generating activities. After performing the market capitalization analysis and
concluding that the fair value of the Minnesota reporting unit was not below its carrying amount, the Company
determined that no further detailed determination of fair value was required.
The Company’s evaluation of goodwill resulted in no impairment losses in 2013, 2012 and 2011.
Patent Rights
The Company capitalizes the cost of obtaining and defending patent rights when there are projected future cash
flows for marketed or partnered products associated with the patent. These capitalized costs are being amortized on
a straight-line basis over periods ranging from five to fifteen years beginning on the earlier of the date the patent is
issued or the first commercial sale of product utilizing such patent rights. Amortization expense for the years ended
70
December 31, 2013, 2012 and 2011 was $133,788, $85,253 and $81,535, respectively, and is recorded in general
and administrative expenses in the consolidated statements of operations.
Impairment of Long-Lived Assets and Long-Lived Assets to Be Disposed Of
Long-lived assets, including patent rights, are reviewed for impairment whenever events or changes in
circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. Recoverability of
assets to be held and used is measured by a comparison of the carrying amount of an asset to future net cash flows
expected to be generated by the asset or asset group. This analysis can be very subjective as the Company relies
upon signed distribution or license agreements with variable cash flows to substantiate the recoverability of long-
lived assets. If such assets are considered to be impaired, the impairment to be recognized is measured by the
amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are
reported at the lower of the carrying amount or fair value less costs to sell.
Each year the Company reviews patent costs for impairment and identifies patents related to products for which
there are no signed distribution or license agreements or for which no revenues or cash flows are anticipated. In
2013, the Company recognized expense of $65,022 in connection with the write off of patent costs related to
abandoned patents or patents no longer connected with current products. No impairment charges were recognized in
2012 or 2011. The gross carrying amount and accumulated amortization of patents, which are the only intangible
assets of the Company subject to amortization, were $2,635,706 and $1,290,529, respectively, at December 31, 2013
and were $2,244,086 and $1,120,434, respectively, at December 31, 2012. The Company’s estimated aggregate
patent amortization expense for the next five years is approximately $145,000, $152,000, $160,000, $160,000 and
$160,000 in 2014, 2015, 2016, 2017 and 2018, respectively.
Fair Value of Financial Instruments
Cash and cash equivalents are stated at cost, which approximates fair value.
All short-term and long-term investments are U.S. Treasury bills or U.S. Treasury notes that are classified as
held-to-maturity because the Company has the positive intent and ability to hold the securities to maturity. The
securities are carried at their amortized cost. The fair value of all securities is determined by quoted market prices,
which is a Level 1 fair value measurement. All long-term investments mature in less than two years. At December
31, 2013 the short-term investments had a fair value of $24,021,522 and a carrying value of $24,014,305 and the
long-term investments had a fair value of $6,007,851 and a carrying value of $6,008,169. At December 31, 2012 the
short-term investments had a fair value of $21,116,952 and a carrying value of $21,112,623 and the long-term
investments had a fair value of $12,016,530 and a carrying value of $12,015,906.
Revenue Recognition
The Company recognizes revenue from the sale of products and from license fees, milestones and royalties.
Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred and title has
passed, (iii) the price is fixed or determinable and (iv) collectability is reasonably assured.
The Company sells its proprietary reusable needle-free injectors and related disposable products to
pharmaceutical partners and through medical product distributors. The Company’s reusable injectors and related
disposable products are not interchangeable with any competitive products and must be used together. The Company
recognizes revenue upon shipment when title transfers. The Company offers no price protection or return rights
other than for customary warranty claims. Sales terms and pricing are governed by license and distribution
agreements.
Revenue arrangements with multiple deliverables are divided into separate units of accounting if certain criteria
are met, including whether the deliverable has stand-alone value to the customer, the customer has a general right of
return relative to the delivered item and delivery or performance of the undelivered item is probable and
substantially within the vendor’s control. Arrangement consideration is allocated at the inception of the arrangement
to all deliverables on the basis of their relative selling price. The selling price for each deliverable is determined
using: (i) vendor-specific objective evidence of selling price (VSOE), if it exists, (ii) third-party evidence of selling
71
price (TPE) if VSOE does not exist, and (iii) the Company’s best estimate of the selling price if neither VSOE nor
TPE exists. For transactions entered into prior to January 1, 2011, revenue is recognized for each deliverable based
upon the applicable revenue recognition criteria discussed above and upon acceptance of goods or performance of
service. Effective January 1, 2011, for new or significantly modified transactions, the Company allocates revenue
consideration, excluding contingent consideration, based on the relative selling prices of the separate units of
accounting contained within an arrangement containing multiple deliverables.
Royalty revenues are recognized in the quarter earned when the Company has information available to
determine the royalty amount, however, the majority of the Company’s royalty revenues are recognized one quarter
in arrears as information is typically not available to determine quarterly royalty earnings until royalty statements
are received from partners.
At December 31, 2013, $6,386,416 of non-refundable cash payments received have been recorded as deferred
revenue in cases where the revenue is not immediately recognized due to the earnings process not yet having been
completed.
Shipping and Handling Costs
The Company records shipping and handling costs in cost of product sales.
Stock-Based Compensation
The Company records compensation expense associated with share based awards granted to employees at the
fair value of the award on the date of grant. The expense is recognized over the period during which an employee is
required to provide services in exchange for the award. The Company uses the Black-Scholes option valuation
model to determine the fair value of stock options. The fair value model includes various assumptions, including the
expected volatility and expected life of the awards.
Product Warranty
The Company provides a warranty on its reusable needle-free injector devices. Warranty terms for these devices
sold to end-users by dealers and distributors are included in the device instruction manual included with each device
sold. Warranty terms for these devices sold to pharmaceutical partners who provide their own warranty terms to
end-users are included in the contracts with the pharmaceutical partners. The Company is obligated to repair or
replace, at the Company’s option, a needle-free injector device found to be defective due to use of defective
materials or faulty workmanship. The warranty does not apply to any product that has been used in violation of
instructions as to the use of the product or to any product that has been neglected, altered, abused or used for a
purpose other than the one for which it was manufactured. The warranty also does not apply to any damage or defect
caused by unauthorized repair or the use of unauthorized parts. The warranty period on a needle-free injector device
is typically 24 months from either the date of retail sale of the device by a dealer or distributor or the date of
shipment to a customer if specified by contract. The Company recognizes the estimated cost of warranty obligations
at the time the products are shipped based on historical claims incurred by the Company. The Company increased
the warranty liability in 2011 due to an increase in product sales. Actual warranty claim costs could differ from
these estimates. Warranty liability activity is as follows:
Balance at
Beginning of
Year
100,000
100,000
20,000
$
$
$
Provisions
Claims
$
$
$
50,819 $
72,893 $
95,766 $
(50,819)
(72,893)
(15,766)
Balance at
End of
Year
100,000
100,000
100,000
$
$
$
2013
2012
2011
Research and Development
Research and development costs are expensed as incurred.
72
Income Taxes
Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences
between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases.
Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the
years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets
and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.
Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be
realized. As of December 31, 2012, a valuation allowance was established to offset all of the Company’s deferred
tax assets, and as of December 31, 2013, a valuation allowance was established to offset all of the U.S. deferred tax
assets. For the year ended December 31, 2013, the Company recorded an income tax benefit of $300,000 after
releasing $300,000 of the valuation allowance related to the Switzerland deferred tax assets.
Net Loss Per Share
Basic net loss per share is computed by dividing net income or loss available to common stockholders by the
weighted-average number of common shares outstanding for the period. Diluted net loss per share is computed
similar to basic net loss per share except that the weighted average shares outstanding are increased to include
additional shares from the assumed exercise of stock options and warrants, if dilutive. The number of additional
shares is calculated by assuming that outstanding stock options or warrants were exercised and that the proceeds
from such exercise were used to acquire shares of common stock at the average market price during the reporting
period. All potentially dilutive common shares were excluded from the calculation because they were anti-dilutive
for all periods presented. Potentially dilutive securities at December 31, 2013, 2012 and 2011, excluded from
dilutive loss per share as their effect is anti-dilutive, are as follows:
Stock options and warrants
8,242,992
10,830,530
17,860,956
2013
2012
2011
3. Composition of Certain Financial Statement Captions
Inventories:
Raw material
Work in process
Finished goods
Equipment, molds, furniture and fixtures:
Furniture, fixtures and office equipment
Production molds and equipment
Molds and tooling in process
Less accumulated depreciation
Patent rights:
Patent rights
Less accumulated amortization
Accrued expenses and other liabilities:
Accrued employee compensation and benefits
Liabilities related to OTREXUP™ development and
commercialization expenses
Other liabilities
73
December 31,
2013
December 31,
2012
$
$
1,056,054
3,034,321
2,370,676
6,461,051
$
609,016
-
393,687
$ 1,002,703
$ 1,501,612
7,389,062
424,521
(2,362,944 )
6,952,251
$
$ 1,133,925
1,503,615
2,948,249
(2,002,685)
$ 3,583,104
$
$
$
2,635,706
(1,290,529 )
1,345,177
$ 2,244,086
(1,120,434)
$ 1,123,652
2,348,456
$ 1,896,832
1,946,869
1,157,750
$ 5,453,075
-
1,019,868
$ 2,916,700
4. Leases
The Company has non-cancelable operating leases for its corporate headquarters facility in Ewing, New Jersey,
and its office, research and development facility in Plymouth, MN, a suburb of Minneapolis, MN. In November
2013, the Company exercised an early termination option under which the Company must exit the current Plymouth
location by August 31, 2014. In December 2013, the Company entered into a lease agreement for approximately
18,000 square feet of office, research and development space in a new Plymouth location, which is expected to be
ready for occupancy in April 2014. The leases require payment of all executory costs such as maintenance and
property taxes. The Company also leases certain equipment under various operating leases. Rent expense, net,
incurred for the years ended December 31, 2013, 2012 and 2011 was $453,142, $325,971 and $261,171,
respectively. Future minimum lease payments under operating leases with remaining terms in excess of one year as
of December 31, 2013 were as follows:
2014
2015
2016
2017
2018
Thereafter
Total future minimum lease payments
$
$
Amount
372,767
569,967
581,377
592,905
604,554
1,037,921
3,759,491
5.
Income Taxes
The Company was subject to taxes in both the U.S. and Switzerland in each of the years in the three-year period
ended December 31, 2013. In the U.S., the Company incurred losses for both book and tax purposes for the year
ended December 31, 2013, and, accordingly, no income taxes were provided. In Switzerland, net operating loss
carryforwards were used to fully offset taxable income of approximately $500,000 and $5,500,000 in the years
ended December 31, 2013 and 2012, respectively, and no income taxes were provided.
Income (loss) before income taxes was derived from the following jurisdictions:
U.S.
Switzerland
2013
2012
$
(21,568,727) $
761,951
(16,477,710) $
5,050,260
$
(20,806,776) $ (11,427,450) $
2011
(3,977,263 )
(410,657 )
(4,387,920 )
Effective tax rates differ from statutory income tax rates in the years ended December 31, 2013, 2012 and 2011
as follows:
Statutory income tax rate
State income taxes
Valuation allowance increase (decrease)
Effect of foreign operations
Change in unused net operating loss and credit carryforwards
Nondeductible items
Other
2013
2012
2011
(34.0)%
(1.0)
28.8
(0.7)
(1.0)
6.5
-
(1.4)%
(34.0)%
(3.6)
29.8
(8.5)
14.0
0.6
1.7
0.0%
(34.0)%
(1.6)
(4.3)
1.9
35.5
1.8
0.7
0.0%
74
Deferred tax assets (liabilities) as of December 31, 2013 and 2012 consist of the following:
Net operating loss carryforward – U.S.
Net operating loss carryforward – Switzerland
Research and development tax credit carryforward
Deferred revenue
Depreciation and amortization
Stock-based compensation
Other
Less valuation allowance
2013
2012
$ 28,832,000
4,556,000
2,589,000
320,000
(105,000)
1,581,000
93,000
37,866,000
(37,566,000)
300,000
$
$ 22,411,000
5,551,000
1,292,000
398,000
115,000
1,573,000
1,150,000
32,490,000
(32,490,000 )
—
$
The valuation allowance for deferred tax assets as of December 31, 2013 and 2012 was $37,566,000 and
$32,490,000, respectively. The total valuation allowance increased $5,076,000 for the year ended December 31,
2013 and increased $3,579,000 for the year ended December 31, 2012. Prior to 2012, management determined that
it was more likely than not that the deferred tax assets associated with the NOL carryforwards in Switzerland would
not be realized and provided a valuation allowance for the full amount of the deferred tax assets. In 2013 and 2012,
the Company realized the benefit of the deferred tax assets associated with approximately $500,000 and $5,500,000,
respectively, of NOL carryforwards in Switzerland for which a valuation allowance had been recorded. In assessing
the realizability of deferred tax assets, management considers whether it is more likely than not that some portion or
all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon
the generation of future taxable income during the periods in which temporary differences become deductible or in
which net operating loss or tax credit carryforwards can be utilized. Both positive and negative evidence is
considered in assessing the realizability of deferred tax assets and determining whether or not to record a valuation
allowance. After considering that the Switzerland operations had generated taxable income for two consecutive
years and after determining that it appears likely that taxable income will continue, in the fourth quarter of 2013
management determined it is more likely than not that a portion of the deferred tax assets will be realized; therefore,
$300,000 of the valuation allowance has been released as of December 31, 2013. After considering the evidence
with respect to the U.S. deferred tax assets, management determined that as of December 31, 2013, it continues to be
more likely than not that the U.S. deferred tax assets will not be realized and has recorded a valuation allowance
against all U.S. deferred tax assets.
The Company has a U.S. federal net operating loss carryforward at December 31, 2013, of approximately
$87,100,000, which, subject to limitations of Internal Revenue Code (“IRC”) Section 382, is available to reduce
income taxes payable in future years. If not used, this carryforward will expire in years 2018 through 2033.
Included in the federal net operating loss is approximately $5,200,000 of loss generated by deductions related to
equity-based compensation, the tax effect of which will be recorded to additional paid in capital when utilized.
Additionally, the Company has a research credit carryforward of approximately $2,600,000. These credits expire in
years 2018 through 2033.
Utilization of U.S. net operating losses and tax credits of the Company may be subject to annual limitations
under IRC Sections 382 and 383, respectively. The annual limitations, if any, have not yet been determined. When
a review is performed and if any annual limitations are determined, then the gross deferred tax assets for the net
operating losses and tax credits would be reduced with a reduction in the valuation allowance of a like amount.
The Company also has a Swiss net operating loss carryforward at December 31, 2013, of approximately
$33,700,000, which is available to reduce income taxes payable in future years. If not used, this carryforward will
expire in years 2014 through 2018, with approximately $33,300,000 expiring over the next three years.
As of December 31, 2013 and 2012, there were no unrecognized tax benefits. Accordingly, a tabular
reconciliation from beginning to ending periods is not provided. The Company will classify any future interest and
75
penalties as a component of income tax expense if incurred. To date, there have been no interest or penalties
charged or accrued in relation to unrecognized tax benefits.
The Company does not anticipate that the total amount of unrecognized tax benefits will change significantly in
the next twelve months.
The Company is subject to federal and state examinations for the years 2008 and thereafter. There are no tax
examinations currently in progress.
6. Stockholders’ Equity
Common Stock
In October 2012, the Company sold 12,500,000 shares of common stock at a price of $4.00 per share in a public
offering, and in November 2012 the Company sold 1,759,868 shares of the Company’s common stock at $4.00 per
share as a result of the partial exercise of the underwriters’ over-allotment option. The Common Stock sales resulted
in net proceeds of $53,328,188 after deducting offering expenses of $3,711,284.
Stock Options
The Company’s 2008 Equity Compensation Plan (the “Plan”) allows for grants in the form of incentive stock
options, nonqualified stock options, stock units, stock awards, stock appreciation rights, and other stock-based
awards. All of the Company’s officers, directors, employees, consultants and advisors are eligible to receive grants
under the Plan. Under the Plan, the maximum number of shares authorized for issuance is 15,000,000 and the
maximum number of shares of stock that may be granted to any one participant during a calendar year is 1,000,000
shares. Options to purchase shares of common stock are granted at exercise prices not less than 100% of fair market
value on the dates of grant. The term of each option is either 10 or 11 years and the options vest in varying periods.
As of December 31, 2013, the Plan had 247,400 shares available for grant. Stock option exercises are satisfied
through the issuance of new shares.
A summary of stock option activity under the Plan as of December 31, 2013 and the changes during the three
years then ended is as follows:
Outstanding at December 31, 2010
Granted/Issued
Exercised
Cancelled/Forfeited
Outstanding at December 31, 2011
Granted/Issued
Exercised
Cancelled/Forfeited
Outstanding at December 31, 2012
Granted/Issued
Exercised
Cancelled/Forfeited
Outstanding at December 31, 2013
Number of
Shares
7,657,876
972,409
(750,063)
(94,550)
7,785,672
1,334,731
(1,164,636)
(141,206)
7,814,561
1,129,380
(981,385)
(264,664)
7,697,892
Weighted
Average
Exercise Price
($)
1.18
1.75
1.37
3.21
1.21
3.18
1.20
4.06
1.49
3.99
0.72
3.48
1.89
Exercisable at December 31, 2013
6,207,584
1.47
Weighted
Average
Remaining
Contractual
Term (Years)
Aggregate
Intrinsic Value
($)
488,724
2,620,360
3,319,471
19,883,523
18,605,127
6.3
5.6
76
As of December 31, 2013, there was approximately $2,549,656 of total unrecognized compensation cost related
to nonvested outstanding stock options that is expected to be recognized over a weighted average period of
approximately 2.2 years.
Stock option expense recognized in 2013, 2012 and 2011 was approximately $1,364,000, $1,164,000 and
$1,055,000, respectively. The per share weighted average fair value of options granted during 2013, 2012 and
2011 was estimated as $2.26, $1.64, $0.89, respectively, on the date of grant using the Black-Scholes option pricing
model based on the assumptions noted in the table below. Expected volatilities are based on the historical volatility
of the Company’s stock. The weighted average expected life is based on both historical and anticipated employee
behavior.
Risk-free interest rate
Annualized volatility
Weighted average expected life, in years
Expected dividend yield
2013
December 31,
2012
0.9%
62.0%
6.0
0.0%
0.7%
61.0%
5.0
0.0%
2011
1.7%
59.0%
5.0
0.0%
Option exercises during 2013, 2012 and 2011 resulted in proceeds of $692,348, $792,203 and $1,025,985,
respectively, and in the issuance of 981,385, 965,597 and 750,063 shares of common stock, respectively. In 2012,
583,344 options were exercised under a cashless provision resulting in the issuance of 384,305 shares of common
stock and no cash proceeds to the Company.
Warrants
Warrant activity is summarized as follows:
Outstanding at December 31, 2010
Exercised
Cancelled
Number of
Shares
17,685,059
(4,107,759)
(3,502,016)
Outstanding at December 31, 2011
10,075,284
Exercised
Cancelled
Outstanding at December 31, 2012
Exercised
Cancelled
Outstanding at December 31, 2013
(7,056,075)
(3,240)
3,015,969
(1,470,869)
(1,000,000)
545,100
Weighted
Average Price ($)
1.56
1.37
1.50
1.66
1.53
2.00
1.98
1.11
3.78
1.00
Warrant exercises during 2013, 2012 and 2011 resulted in proceeds of $1,634,490, $10,787,210 and
$4,994,451, respectively, and in the issuance of 1,470,869, 7,056,075 and 3,725,272 shares of common stock,
respectively.
Stock Awards
The employment agreements with certain members of executive management included performance-based
incentives under which the executives could be awarded shares of common stock upon the occurrence of various
triggering events. As of December 31, 2013, the time period for these potential awards had expired. There were
35,000 and 145,454 shares awarded under these agreements in 2012, and 2011, respectively.
At times, the Company makes discretionary grants of its common stock to members of management and other
employees in lieu of cash bonus awards or in recognition of special achievements. There were no discretionary
grants of common stock in 2013, and grants in 2012 and 2011 totaled 60,000 and 368,267, respectively.
77
Expense is recognized on a straight line basis over the vesting period and is based on the fair value of the stock
on the grant date. The fair value of each stock award is determined based on the number of shares granted and the
market price of the Company’s common stock on the date of grant. Expense recognized in connection with
performance and discretionary stock awards was $8,722, $301,017 and $771,491 in 2013, 2012 and 2011,
respectively.
A portion of the shares vested in 2013, 2012 and 2011 were net-share settled such that the Company withheld
shares with value equivalent to the employees’ minimum statutory obligation for the applicable income and other
employment taxes, and remitted the cash to the appropriate taxing authorities. The total shares withheld were
30,153, 11,165 and 121,182 in 2013, 2012 and 2011, respectively, and were based on the value of the shares on their
vesting date as determined by the Company’s closing stock price. Total payments for the employees’ tax obligations
to the taxing authorities were $104,329, $28,916 and $233,291 in 2013, 2012 and 2011, respectively, and are
reflected as a financing activity within the Consolidated Statements of Cash Flows. These net-share settlements had
the effect of share repurchases by the Company as they reduced the number of shares that would have otherwise
been issued as a result of the vesting and did not represent an expense to the Company.
In addition to the shares granted to members of management and employees, at times directors receive a portion
of their annual compensation in shares of Company common stock. Expense is recognized on a straight line basis
over the one year period that the compensation is earned. Expense recognized in connection with shares granted to
directors was $679,500, $560,000 and $46,500 in 2013, 2012 and 2011, respectively.
As of December 31, 2013, a total of 212,618 shares granted to directors were unvested. As of December 31,
2013, there was approximately $350,000 of total unrecognized compensation cost related to nonvested stock awards
that is expected to be recognized over a weighted average period of approximately 5 months. The weighted average
fair value of the shares granted in 2013 and 2012, excluding shares granted under the LTIP program, was $4.01 and
$2.84 per share, respectively.
Long Term Incentive Program
The Company’s Board of Directors has approved a long term incentive program for the benefit of the
Company’s senior executives. Pursuant to the long term incentive program, the Company’s senior executives have
been awarded stock options and performance stock units with targeted values based on values granted by the
Company’s peer group. In 2013, the program was modified such that the value of the annual award for each senior
executive was delivered one-third in the form of performance stock units, one-third in the form of shares of
restricted stock and one-third in the form of stock options. In prior years, two thirds of the value for each senior
executive was delivered in the form of stock options and one third of the value was delivered in the form of
performance stock units. The stock options have a ten-year term, have an exercise price equal to the closing price of
the Company’s common stock on the date of grant, vest in quarterly installments over three years, were otherwise
granted on the same standard terms and conditions as other stock options granted pursuant to the Plan and are
included in the stock options table above. The restricted stock vests in three equal annual installments. Expense
recognized in 2013 in connection with the restricted stock was $125,000. The performance stock unit awards made
to the senior executives will be vested and convert into actual shares of the Company’s common stock based on the
Company’s attainment of certain performance goals over a performance period of three years. Expense recognized
in 2013 in connection with the performance stock unit awards for defined performance goals considered probable of
achievement was $259,000. The performance stock unit awards and restricted stock granted under the long term
incentive program are summarized in the following table:
78
Number of
Shares
Performance Stock Units
Weighted
Average Fair
Value ($)
-
1.66
-
-
1.66
4.26
-
-
2.78
3.96
-
3.32
3.19
-
182,000
-
-
182,000
137,715
-
-
319,715
185,185
-
(98,237)
406,663
Restricted Stock
Number of
Shares
-
-
-
-
-
-
-
-
-
185,185
-
(29,461)
155,724
Weighted
Average Fair
Value ($)
-
-
-
-
-
-
-
-
-
3.96
-
3.96
3.96
Outstanding at December 31, 2010
Granted
Vested
Forfeited/Expired
Outstanding at December 31, 2011
Granted
Vested
Forfeited/Expired
Outstanding at December 31, 2012
Granted
Vested
Forfeited/Expired
Outstanding at December 31, 2013
7. Employee 401(k) Savings Plan
The Company sponsors a 401(k) defined contribution retirement savings plan that covers all U.S. employees
who have met minimum age and service requirements. Under the plan, eligible employees may contribute up to 50%
of their annual compensation into the plan up to the IRS annual limits. At the discretion of the Board of Directors,
the Company may contribute elective amounts to the plan, allocated in proportion to employee contributions to the
plan, employee’s salary, or both. For the years ended December 31, 2013, 2012 and 2011, the total number of
employees enrolled in the plan has increased and the Company elected to make contributions to the plan totaling
approximately $230,000, $173,000 and $109,000, respectively.
8. License Agreements
LEO Pharma Promotion and License Agreement
In November 2013 the Company entered into a promotion and license agreement with LEO Pharma (“LEO”).
Under this agreement the Company granted LEO the exclusive right to promote OTREXUP™ to dermatologists for
symptomatic control of severe recalcitrant psoriasis in adults in the U.S. LEO is responsible for promotion and
marketing activities in dermatology and the Company is responsible for the supply of OTREXUP™ product and
samples. The Company received from LEO a non-refundable upfront payment of $5.0 million, will receive a
milestone payment of $5.0 million upon launch of the product and meeting other performance obligations and will
receive a milestone payment of $10.0 million upon realizing a defined level of net sales in a calendar year. The
Company will pay LEO a percentage of net sales generated in dermatology and will record the payments to LEO as
sales and marketing expense.
The Company identified and evaluated a number of deliverables in the agreement and concluded that none of
the deliverables have value on a stand-alone basis. As a result, these deliverables do not qualify for treatment as
separate units of accounting. Accordingly, the deliverables have been accounted for as a single unit of accounting
and each of the payments will be allocated to these deliverables and will be recognized as revenue over the 35
month estimated life of the agreement. The Company recognized revenue of approximately $571,000 in the year
ended December 31, 2013, and recorded the $4,429,000 remaining portion of the upfront payment as deferred
revenue at December 31, 2013.
Teva License Development and Supply Agreements
In November 2012, the Company entered into a license, supply and distribution agreement with Teva for an
auto injector product containing sumatriptan for the treatment of migraines. Teva will manufacture and supply
sumatriptan in a prefilled syringe. The Company will manufacture the device, assemble the device and prefilled
syringe and supply the final product to Teva for distribution. Teva will distribute the product in the United States.
79
Teva also received an option for rights in other territories. Under the agreement, the Company received an upfront
payment, which was deferred, and will receive a milestone payment upon commercial launch. In addition, net
profits will be split 50/50 between the Company and Teva. The term of the agreement is seven years from
commercial launch, with automatic one year renewals.
In December 2007, the Company entered into a license, development and supply agreement with Teva under
which the Company will develop and supply a disposable pen injector for use with two undisclosed patient-
administered pharmaceutical products. Under the agreement, an upfront payment, development milestones, and
royalties on Teva’s product sales, as well as a purchase price for each device sold are to be received by the Company
under certain circumstances. Based on an analysis under accounting literature applicable at the time of the
agreement, the entire arrangement was considered a single unit of accounting. Therefore, payments received and
development costs incurred were deferred and were to be recognized from the start of manufacturing through the
end of the initial contract period. In January 2011, this license, development and supply agreement was amended
wherein Teva pays for all development work and tooling associated with device development. Additionally, we are
now developing two different disposable pens, one for each product. As further explained in Note 9 to the
consolidated financial statements, the Company determined that the changes to the agreement as a result of the
amendment are a material modification to the agreement and the accounting for the revenue and costs under this
agreement was changed. This agreement will continue until the later of December 2017 or the expiration date of the
last to expire patent covering the device or product that is filed no later than 12 months after FDA approval, and will
be automatically renewed for successive periods of two years each.
In September 2006, the Company entered into a Supply Agreement with Teva. Pursuant to the agreement, Teva
is obligated to purchase all of its needle-free delivery device requirements from Antares for hGH to be marketed in
the United States. Antares was entitled to an upfront cash payment, milestone fees and royalty payments on Teva’s
net sales, as well as a purchase price for each device sold. The upfront payment was recognized as revenue over the
development period. The milestone fees and royalties will be recognized as revenue when earned. In 2009, Teva
launched the Company’s Tjet needle-free device with their hGH Tev-Tropin®. In 2010, the Company received a
milestone payment from Teva in connection with this agreement. The original term of this agreement extended
through September 2013. In May 2013 the agreement was amended to provide for one year automatic renewals
unless terminated by either party six months ahead of the expiring term.
In July 2006, the Company entered into an exclusive License Development and Supply Agreement with Teva.
Pursuant to the agreement, Teva is obligated to purchase all of its delivery device requirements from Antares for an
auto injector product containing epinephrine to be marketed in the United States and Canada. Antares was entitled
to an upfront cash payment, milestone fees, a negotiated purchase price for each device sold, as well as royalties on
sales of their product. This agreement will continue until the later of July 2016 or the expiration date of the last to
expire patent covering the device or product that is filed no later than 12 months after FDA approval.
On April 26, 2012, the Company announced that Meridian Medical Technologies, a Pfizer subsidiary, entered
into a settlement agreement with Teva that will resolve pending patent litigation related to its abbreviated new drug
application (ANDA) for a generic epinephrine auto-injector. According to the terms of the settlement, Teva may
launch a generic epinephrine auto-injector covered by its ANDA on June 22, 2015 or earlier under certain
circumstances, subject to receipt of approval from the U.S. Food and Drug Administration. Additional terms of the
agreement are confidential.
Under a separate agreement, Teva has agreed to provide the Company with device orders of an undisclosed
amount in the years 2013 and 2014, to make a milestone payment to the Company upon FDA approval of
epinephrine auto-injector, and to assume all litigation costs related to the patent litigation between Teva and
Meridian Medical.
Ferring Agreements
On November 6, 2009, the Company entered into an Exclusive License Agreement with Ferring, under which
the Company licensed certain of its patents and agreed to transfer know-how for its transdermal gel technology for
certain pharmaceutical products. This agreement had no impact on the Company’s existing licenses, the transdermal
clinical pipeline, or marketed products, including Gelnique 3%™, Nestragel™ (Nestorone®), and Elestrin®. Also on
80
November 6, 2009, in tandem with the execution of the Exclusive License Agreement, the Company entered into an
Asset Purchase Agreement (the “Purchase Agreement”) with Ferring. Pursuant to the terms and conditions of the
Purchase Agreement, Ferring purchased from the Company all of the assets, including equipment, fixtures, fittings
and inventory, located at the Company’s research and development facility located in Allschwil, Switzerland (the
“Facility”). Further pursuant to the terms and conditions of the Purchase Agreement, Ferring assumed the
contractual obligations related to the Facility, including the real property lease for the Facility, and continued to
employ the employees working at the Facility. The Company also entered into a Consultancy Services Agreement
with Ferring for a period of 12 months, under which the Company provided services in connection with
development of certain pharmaceutical products under the Exclusive License Agreement. Under these agreements
the Company received upfront license fees, payments for assets and payments for services rendered under the
consultancy agreement. In addition, the Company will receive milestone payments as certain defined milestones are
achieved. The agreement is effective until the last to expire patent applicable under the agreement.
Although there were three separate agreements with Ferring, they were evaluated as a single arrangement for
purposes of applying the applicable accounting standard. Payments received under the Exclusive License
Agreement were recognized over the 12 month period of the Consultancy Services Agreement, as this is the period
of time the Company was involved in development. Payments received in connection with milestones will be
recognized when the milestone payment is received. The amount received from Ferring for the assets sold resulted
in a gain, which was recorded in other income.
The Company entered into a License Agreement, dated January 22, 2003, with Ferring, under which the
Company licensed certain of its intellectual property and extended the territories available to Ferring for use of
certain of the Company’s reusable needle-free injector devices. Specifically, the Company granted to Ferring an
exclusive, perpetual, irrevocable, royalty-bearing license, within a prescribed manufacturing territory, to
manufacture certain of the Company’s reusable needle-free injector devices for the field of human growth hormone.
The Company granted to Ferring similar non-exclusive rights outside of the prescribed manufacturing territory.
As consideration for the license grants, Ferring paid the Company an upfront payment upon execution of the
License Agreement, and paid an additional milestone in 2003. Ferring also pays the Company royalties for each
device manufactured by or on behalf of Ferring, including devices manufactured by the Company. These royalty
obligations expire, on a country-by-country basis, when the respective patents for the products expire, despite the
fact that the License Agreement does not itself expire until the last of such patents expires. The license fees have
been deferred and are being recognized in income over the period from 2003 through expiration of the patents in
2016.
In March 2007, the Company amended the agreement increasing the royalty rate and device pricing, included a
next generation device and provided for payment principally in U.S. dollars rather than Euros.
Actavis License and Commercialization Agreement
In July 2011, the Company entered into an exclusive licensing agreement with Actavis to commercialize, in the
U.S. and Canada, the Company’s topical oxybutynin gel 3% product, which was subsequently approved by the FDA
in December 2011.
Under this agreement the Company received payments for certain manufacturing start-up activities and delivery
of launch quantities, and has received and is entitled to receive future royalties on both the Company’s oxybutynin
gel 3% product and Actavis’ oxybutynin gel product Gelnique® 10%, and will potentially receive sales based
milestone payments. The milestone payment based on the achievement of regulatory approval was subject to
reimbursement to Actavis if launch quantities were not delivered within a certain defined time period. Actavis
assumed all responsibility for manufacture and supply of the product in 2013. The term of the agreement ends on
the later of April 2024 or the expiration date of the last to expire patent.
Arrangement consideration has been allocated to the separate units of accounting based on the relative selling
prices. Selling prices are determined using vendor specific objective evidence (“VSOE”), when available, third-
party evidence (“TPE”), when available, or an estimate of selling price when neither of the first two options is
available for a given unit of accounting. Selling prices in this arrangement were determined using estimated selling
81
prices because VSOE and TPE were not available. The primary factors considered in determining selling price
estimates in this arrangement were estimated costs, reasonable margin estimates and historical experience.
The Company determined that the license and development activities, which include the manufacturing start-up
activities, do not have value to the customer on a stand-alone basis as proprietary knowledge about the product and
technology is required to complete the development activities. As a result, these deliverables do not qualify for
treatment as separate units of accounting. Accordingly, the license and development activities have been accounted
for as a single unit of accounting and arrangement consideration allocated to these deliverables was recognized as
revenue over the development period, which ended upon manufacture of launch quantities. The sales based
milestone payments will be recognized as revenue when earned, revenue for launch quantities was recognized when
product was delivered to Actavis and royalties will be recognized as revenue when earned. The Company received a
milestone payment from Actavis in December 2011 upon FDA approval, which was recorded as deferred revenue.
This milestone payment was recognized as revenue in March of 2012, as launch quantities were delivered within the
defined time period and the potential reimbursement liability was eliminated.
Pfizer License Agreement
In December 2011, the Company announced that it licensed to Pfizer Inc.’s Consumer Healthcare Business Unit
one of its drug delivery technologies to develop an undisclosed product on an exclusive basis for North America.
Pfizer will assume full cost and responsibility for all clinical development, manufacturing, and commercialization of
the product in the licensed territory, which also includes certain non-exclusive territories outside of North America.
Antares received an upfront payment, and will receive development milestones and sales based milestones, as well
as royalties on net sales for three years post launch in the U.S. Because the Company has no development
responsibilities, the upfront and each milestone payment will be recognized as revenue when received. Royalties
will be recognized as revenue when earned.
Daewoong Development and License Agreement
In January 2012, the Company entered into a licensing agreement with Daewoong Pharmaceuticals
(“Daewoong”) under which Daewoong will commercialize the Company’s oxybutynin gel 3% product, once
approved in South Korea. The agreement terms include an upfront payment, development and sales-based milestone
payments and escalating royalties based on product sales in South Korea. Because the Company has no
development responsibilities, the upfront and each milestone payment will be recognized as revenue when received.
Royalties will be recognized as revenue when earned. The term of the agreement ends on the later of fifteen years
following launch of the product or the expiration date of the last to expire patent.
ANI License Agreement (formerly BioSante)
In June 2000, the Company entered into an exclusive agreement to license four applications of its drug-delivery
technology to ANI Pharmaceuticals (formerly BioSante Pharmaceuticals) in the United States, Canada, China,
Australia, New Zealand, South Africa, Israel, Mexico, Malaysia and Indonesia (collectively, “the ANI Territories”).
ANI will use the licensed technology for the development of hormone replacement therapy products. At the signing
of the contract, ANI made an upfront payment to the Company, a portion of which, per the terms of the contract,
was used to partially offset a later payment made to the Company as a result of an upfront payment received by ANI
under a sublicense agreement. The initial upfront payment received by the Company was for the delivery of
intellectual property to ANI. The term of the agreement ends on the later of the tenth anniversary of the first
commercial sale of a product or the expiration date of the last to expire patent.
The Company will receive payments upon the achievement of certain milestones and will receive from ANI a
royalty from the sale of licensed products. The Company will also receive a portion of any sublicense fees received
by ANI.
In December 2009, ANI entered into a license agreement with Azur Pharma International II Limited (“Azur”),
for Elestrin®. ANI has received payments from Azur which triggered sublicense payments to the Company.
Because final regulatory approval for this product was obtained by ANI and Antares had no further obligations in
connection with this product, the sublicense payments were recognized as revenue when received. Elestrin® is being
82
marketed in the U.S. by Meda Pharma, who acquired the women’s health business from Jazz Pharmaceuticals
(“Jazz”), who had previously acquired Azur. The Company has received royalties on sales of Elestrin®, which have
been recognized as revenue when received.
9. Revenue Recognition
In January of 2011, the Company amended the license, development and supply agreement with Teva originally
entered into in December of 2007 under which the Company will develop and supply a disposable pen injector for
use with two undisclosed patient-administered pharmaceutical products. Under the original agreement, an upfront
payment, development milestones, and royalties on Teva’s product sales, as well as a purchase price for each device
sold were to be received by the Company under certain circumstances. Based on an analysis under accounting
literature applicable at the time of the agreement, the entire arrangement was considered a single unit of accounting.
Therefore, payments received and development costs incurred were deferred and were to be recognized from the
start of manufacturing through the end of the initial contract period. Changes to the original agreement as a result of
the amendment included the following: (i) Teva will pay for future device development activities, (ii) Teva will pay
for and own all commercial tooling developed and produced under the agreement, and (iii) certain potential
milestone payments were eliminated. The Company has determined that the changes to the agreement as a result of
the amendment are a material modification to the agreement. Because the agreement was materially modified, the
accounting was re-evaluated under the applicable current revenue recognition accounting standards. The re-
evaluation resulted in the agreement being separated into multiple units of accounting and resulted in changes to
both the method of revenue recognition and the period over which revenue will be recognized. The provisions of
the current standards are to be applied as if they were applicable from inception of the agreement. Under the new
accounting, the original license fee received will be recognized as revenue over the development period, the
development milestone payments previously received were recognized as revenue immediately and revenue during
the manufacturing period will be recognized as devices are sold and royalties are earned. For the year ended
December 31, 2012, the accounting change resulting from the material modification resulted in recognition of
licensing revenue previously deferred of $62,225, and for the year ended December 31, 2011, the accounting change
resulting from the material modification resulted in recognition of development and licensing revenue previously
deferred of $304,600 and $337,776, respectively, and recognition of costs previously deferred of $408,250.
10. Segment Information and Significant Customers
The Company has one operating segment, drug delivery, which includes the development of injection devices
and injection based pharmaceutical products as well as transdermal gel products.
Revenues by customer location are summarized as follows:
2013
For the Years Ended December 31,
2012
$ 16,479,855 $16,964,635 $10,236,304
5,765,909
456,279
$ 20,618,500 $22,575,578 $16,458,492
3,901,422
237,223
4,936,981
673,962
2011
United States of America
Europe
Other
Revenues by product type:
2013
Injection devices and supplies $ 18,156,217 $12,642,537 $14,360,078
2,098,414
Transdermal gel products
$ 20,618,500 $22,575,578 $16,458,492
2,462,283
9,933,041
2011
For the Years Ended December 31,
2012
83
The following summarizes significant customers comprising 10% or more of total revenue for the years ended
December 31:
Teva
Ferring
Actavis
2013
2012
$ 13,559,541 $ 7,495,978 $8,175,990
5,764,208
1,024,240
4,933,369
6,770,635
3,827,098
1,489,942
2011
The following summarizes significant customers comprising 10% or more of outstanding accounts receivable as
of December 31:
Teva
Ferring
Actavis
$
2012
2013
436,632 $ 1,033,203
622,885
562,576
522,807
-
11. Quarterly Financial Data (unaudited)
2013:
Total revenues (1)
Gross profit (1)
Net loss
Net loss per common share (2)
Weighted average shares
2012:
Total revenues
Gross profit
Net loss
Net loss per common share (2)
Weighted average shares
First
Second
Third
Fourth
$
4,528,222 $
2,501,079
(3,408,448)
(0.03)
126,106,713
5,837,544 $
2,356,862
(5,103,256)
(0.04)
126,462,677
5,507,824 $
2,503,222
(6,359,957 )
(0.05 )
127,162,064
4,744,910
4,060,107
(5,635,115)
(0.04)
127,835,641
$
6,864,542 $
4,873,711
(74,394)
(0.00)
103,658,571
4,523,942 $
1,992,831
(2,807,072)
(0.03)
104,551,742
5,685,917 $
2,389,428
(3,534,239 )
(0.03 )
108,961,792
5,501,177
3,799,136
(5,011,745)
(0.04)
123,436,025
(1) Total revenues in the fourth quarter of 2013 included over $1.1 million more licensing and royalty revenue
than in each of the prior three quarters, resulting in a higher gross profit as there were no associated costs
with these revenues. Also impacting gross profit in the fourth quarter was development revenue having a
higher gross profit than development revenue in prior quarters.
(2) Net loss per common share is computed based upon the weighted average number of shares outstanding
during each period. Basic and diluted loss per share amounts are identical as the effect of potential common
shares is anti-dilutive.
84
Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL
DISCLOSURE
None.
Item 9A. CONTROLS AND PROCEDURES
Evaluation of disclosure controls and procedures.
The Company’s management evaluated, with the participation of the Company’s Chief Executive Officer and
Chief Financial Officer, the effectiveness of its disclosure controls and procedures as of the end of the period
covered by this Annual Report on Form 10-K. Based on this evaluation, the Company’s Chief Executive Officer and
Chief Financial Officer have concluded that the Company’s disclosure controls and procedures are effective to
ensure that information required to be disclosed in reports that the Company files or submits under the Securities
Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in
Securities and Exchange Commission rules and forms.
Management’s annual report on internal control over financial reporting.
The Company’s management is responsible for establishing and maintaining adequate internal control over
financial reporting. The Company’s management has assessed the effectiveness of internal control over financial
reporting as of December 31, 2013. This assessment was based on criteria set forth by the Committee of Sponsoring
Organizations of the Treadway Commission, or COSO, in Internal Control-Integrated Framework (1992).
The Company’s internal control over financial reporting is a process designed to provide reasonable assurance
regarding the reliability of financial reporting and the preparation of financial statements for external purposes in
accordance with generally accepted accounting principles. The Company’s internal control over financial reporting
includes those policies and procedures that:
(1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect transactions
and dispositions of the Company’s assets;
(2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial
statements in accordance with generally accepted accounting principles, and that the Company’s receipts
and expenditures are being made only in accordance with authorizations of the Company’s management
and board of directors; and
(3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or
disposition of the Company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect
misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that
controls may become inadequate because of changes in conditions, or that the degree of compliance with the
policies or procedures may deteriorate.
Based on the Company’s assessment using the COSO (1992) criteria, management has concluded that its
internal control over financial reporting was effective as of December 31, 2013 to provide reasonable assurance
regarding the reliability of financial reporting and the preparation of financial statements in accordance with U.S.
generally accepted accounting principles. The Company’s independent registered public accounting firm, KPMG
LLP, has issued an audit report on the Company’s internal control over financial reporting. The report on the audit
of internal control over financial reporting appears in Item 8 of this Annual Report on Form 10-K.
Changes in internal control over financial reporting.
There was no change in the Company’s internal control over financial reporting that occurred during the quarter
ended December 31, 2013 that has materially affected, or is reasonably likely to materially affect, the Company’s
internal control over financial reporting.
85
Item 9B. OTHER INFORMATION
None.
PART III
Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information required by this item concerning our directors will be set forth under the caption “Election of
Directors” in our definitive proxy statement for our 2014 annual meeting, and is incorporated herein by reference.
Information required by this item concerning our executive officers will be set forth under the caption
“Executive Officers of the Company” in our definitive proxy statement for our 2014 annual meeting, and is
incorporated herein by reference.
Information required by this item concerning compliance with Section 16(a) of the Exchange Act, as amended,
will be set forth under the caption “Section 16(a) Beneficial Ownership Reporting Compliance” in our definitive
proxy statement for our 2014 annual meeting, and is incorporated herein by reference.
Information required by this item concerning the audit committee of the Company, the audit committee
financial expert of the Company and any material changes to the way in which security holders may recommend
nominees to the Company’s Board of Directors will be set forth under the caption “Corporate Governance” in our
definitive proxy statement for our 2014 annual meeting, and is incorporated herein by reference.
The Board of Directors adopted a Code of Business Conduct and Ethics, which is posted on our website at
www.antarespharma.com that is applicable to all employees and directors. We will provide copies of our Code of
Business Conduct and Ethics without charge upon request. To obtain a copy, please visit our website or send your
written request to Antares Pharma, Inc., 100 Princeton South, Suite 300, Ewing, NJ 08628, Attn: Corporate
Secretary. With respect to any amendments or waivers of this Code of Business Conduct and Ethics (to the
extent applicable to the Company’s chief executive officer, principal accounting officer or controller, or persons
performing similar functions) the Company intends to either post such amendments or waivers on its website or
disclose such amendments or waivers pursuant to a Current Report on Form 8-K.
Item 11. EXECUTIVE COMPENSATION
Information required by this item will be set forth under the caption “Executive Compensation” in our definitive
proxy statement for our 2014 annual meeting, and is incorporated herein by reference.
Item 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND
RELATED STOCKHOLDER MATTERS
Information required by this item concerning ownership will be set forth under the caption “Security
Ownership of Certain Beneficial Owners” and “Security Ownership of Directors and Executive Officers” in our
definitive proxy statement for our 2014 annual meeting, and is incorporated herein by reference.
86
The following table provides information for our equity compensation plans as of December 31, 2013:
Number of securities
to be issued upon
exercise of
outstanding options,
warrants and rights
Weighted-
average
exercise price of
outstanding
options,
warrants and
rights
Number of securities
remaining available
for future issuance
under equity
compensation plans
(excluding shares
reflected in the first
column)
7,697,892
$
1.89
247,400
Plan Category
Equity compensation plans approved
by security holders
Item 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Information required by this item will be set forth under the captions “Certain Relationships and Related
Transactions” and “Corporate Governance” in our definitive proxy statement for our 2014 annual meeting, and is
incorporated herein by reference.
Item 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES
Information required by this item will be set forth under the caption “Ratification of Selection of Independent
Registered Public Accountants” in our definitive proxy statement for our 2014 annual meeting, and is incorporated
herein by reference.
87
PART IV
Item 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) The following documents are filed as part of this annual report:
(1) Financial Statements - see Part II
(2) Financial Statement Schedules
All schedules have been omitted because they are not applicable, are immaterial or are not required because
the information is included in the consolidated financial statements or the notes thereto.
(3) Item 601 Exhibits - see list of Exhibits below
(b) Exhibits
The following is a list of exhibits filed as part of this annual report on Form 10-K.
Exhibit
No.
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4.4
4.5
4.6
Description
Certificate of Incorporation of Antares Pharma, Inc. (Filed as exhibit 4.1 to Form S-3 on
April 12, 2006 and incorporated herein by reference.)
Certificate of Amendment to Certificate of Incorporation of Antares Pharma, Inc. (Filed as
exhibit 3.1 to Form 8-K on May 19, 2008 and incorporated herein by reference.)
Amended and Restated By-laws of Antares Pharma, Inc. (Filed as exhibit 3.1 to Form 8-K on
May 15, 2007 and incorporated herein by reference.)
Certificate of Amendment to Certificate of Incorporation of Antares Pharma, Inc. (Filed as
exhibit 3.1 to Form 8-K on May 28, 2013 and incorporated herein by reference.)
Form of Certificate for Common Stock (Filed as an exhibit to Form S-1/A on August 15,
1996 and incorporated herein by reference.)
Registration Rights Agreement with Permatec Holding AG dated January 31, 2001 (Filed as
Exhibit 10.2 to Form 10-K for the year ended December 31, 2000 and incorporated herein by
reference.)
Stock Purchase Agreement with Sicor Pharmaceuticals, Inc., dated November 23, 2005 (Filed
as exhibit 10.55 to Form 10-K for the year ended December 31, 2005 and incorporated herein
by reference.)
Form of Warrant to Purchase Common Stock (Filed as Exhibit 4.1 to Form 8-K on July 24,
2009 and incorporated herein by reference).
Form of Warrant to Purchase Common Stock (Filed as Exhibit 4.1 to Form 8-K on September
18, 2009 and incorporated herein by reference).
Form of Subscription Agreement, by and between Antares Pharma, Inc. and the investor party
thereto (Filed as Exhibit 10.2 to Form 8-K filed on July 24, 2009 and incorporated herein by
reference).
4.7
Form of Subscription Agreement, by and between Antares Pharma, Inc. and the investor party
4.8+
thereto (Filed as Exhibit 10.1 to Form 8-K filed on September 18, 2009 and incorporated
herein by reference).
Antares Pharma, Inc. 2008 Equity Compensation Plan, as amended (Filed as Exhibit A to the
Company’s Definitive Proxy Statement on Form DEF 14A filed with the Commission on
April 15, 2013 and incorporated herein by reference.)
10.0
Stock Purchase Agreement with Permatec Holding AG, Permatec Pharma AG, Permatec
Technologie AG and Permatec NV with First and Second Amendments
dated July 14, 2000 (Filed as an exhibit to Schedule 14A on December 28, 2000 and
incorporated herein by reference.)
10.1
Third Amendment to Stock Purchase Agreement, dated January 31, 2001 (Filed as exhibit
88
10.1 to Form 10-K for the year ended December 31, 2000 and incorporated herein by
reference.)
10.2*
License Agreement with BioSante Pharmaceuticals, Inc., dated June 13, 2000 (Filed as
exhibit 10.34 to Form 10-K/A for the year ended December 31, 2001 and incorporated herein
by reference.)
10.3*
Amendment No. 1 to License Agreement with BioSante Pharmaceuticals, Inc., dated May 20,
10.4*
10.5*
10.6*
10.7*
2001 (Filed as exhibit 10.35 to Form 10-K/A for the year ended December 31, 2001 and
incorporated herein by reference.)
Amendment No. 2 to License Agreement with BioSante Pharmaceuticals, Inc., dated July 5,
2001 (Filed as exhibit 10.36 to Form 10-K/A for the year ended December 31, 2001 and
incorporated herein by reference.)
Amendment No. 3 to License Agreement with BioSante Pharmaceuticals, Inc., dated August
28, 2001 (Filed as exhibit 10.37 to Form 10-K/A for the year ended December 31, 2001 and
incorporated herein by reference.)
Amendment No. 4 to License Agreement with BioSante Pharmaceuticals, Inc., dated August
8, 2002 (Filed as exhibit 10.38 to Form 10-K/A for the year ended December 31, 2001 and
incorporated herein by reference.)
License Agreement between Antares Pharma, Inc. and Ferring, dated January 21, 2003 (Filed
as exhibit 10.47 to Form 8-K on February 20, 2003 and incorporated herein by reference.)
10.8
Office lease with The Trustees Under the Will and of the Estate of James Campbell,
10.9
Deceased, dated February 19, 2004 (Filed as exhibit 10.65 to Form 10-K for the year ended
December 31, 2003 and incorporated herein by reference.)
First Amendment to Lease Agreement between James Campbell Company LLC and Antares
Pharma, Inc., dated November 2, 2010. (Filed as exhibit 10.20 to Form 10-K for the year
ended December 31, 2010 and incorporated herein by reference.)
10.10
Form of Indemnification Agreement, dated February 11, 2008, between Antares Pharma, Inc.
and each of its directors and executive officers (Filed as exhibit 10.1 to Form 8-K on
February 13, 2008 and incorporated herein by reference.)
10.11+
Senior Management Agreement by and between Antares Pharma, Inc. and Robert F. Apple,
dated February 9, 2006 (Filed as exhibit 10.1 to Form 8-K on February 14, 2006 and
incorporated herein by reference.)
10.12+
Amendment to Senior Management Agreement with Robert F. Apple, dated November 12,
2008. (Filed as Exhibit 10.1 to Form 10-Q for the Quarter Ended September 30, 2008 and
incorporated herein by reference.)
10.13+
Amendment 2012-1 to Senior Management Agreement with Robert F. Apple, dated
December 14, 2012. (Filed as Exhibit 10.13 to Form 10-K for the year ended December 31,
2012 and incorporated herein by reference.)
10.14+
10.15+
10.16+
10.17+
Employment Agreement, dated July 7, 2008 by and between Antares Pharma, Inc. and Dr.
Paul K. Wotton (Filed as Exhibit 10.1 to Form 8-K on July 7, 2008 and incorporated herein
by reference.)
Amended and Restated Employment Agreement, dated November 12, 2008, by and between
Antares Pharma, Inc. and Dr. Paul K. Wotton (Filed as Exhibit 10.1 to Form 10-Q on May 9,
2011 and incorporated herein by reference.)
Amendment 2012-1 to Amended and Restated Employment Agreement, dated December 14,
2012, by and between Antares Pharma, Inc. and Dr. Paul K. Wotton. (Filed as Exhibit 10.16
to Form 10-K for the year ended December 31, 2012 and incorporated herein by reference.)
Form of Performance Stock Unit Grant (Filed as Exhibit 10.1 to Form 8-K on May 23, 2011
and incorporated herein by reference.)
10.18+
Form of Performance Stock Unit Grant (Filed as Exhibit 10.1 to Form 8-K on July 12, 2012
and incorporated herein by reference.)
10.19+
Form of Performance Stock Unit Grant (Filed as Exhibit 10.1 to Form 10-Q on August 7,
2013 and incorporated herein by reference.)
10.20
Lease Agreement between Princeton South Investors, LLC and Antares Pharma, Inc., dated
February 3, 2012 (Filed as exhibit 10.21 to Form 10-K for the year ended December 31, 2011
and incorporated herein by reference.)
89
10.21
First Amendment to Lease between Princeton South Investors, LLC and Antares Pharma,
Inc., dated January 28, 2013. (Filed as Exhibit 10.22 to Form 10-K for the year ended
December 31, 2012 and incorporated herein by reference.)
10.22
Second Amendment to Lease between Princeton South Investors, LLC and Antares Pharma,
Inc., dated December 4, 2013. #
10.23
Lease Agreement between St. Paul Fire and Marine Insurance Company and Antares Pharma,
Inc., dated December 20, 2013. #
21.1
23.1
31.1
Subsidiaries of the Registrant #
Consent of KPMG LLP, Independent Registered Public Accounting Firm. #
Certification of the Chief Executive Officer of Antares Pharma, Inc. required by
Rule 13a-14(a) under the Securities Exchange Act of 1934, as amended.#
31.2
Certification of the Chief Financial Officer of Antares Pharma, Inc. required by
Rule 13a-14(a) under the Securities Exchange Act of 1934, as amended.#
32.1
Certification of the Chief Executive Officer of Antares Pharma, Inc. required by
Rule 13a-14(b) under the Securities Exchange Act of 1934, as amended.##
32.2
Certification of the Chief Financial Officer of Antares Pharma, Inc. required by
Rule 13a-14(b) under the Securities Exchange Act of 1934, as amended.##
101.INS
XBRL Instance Document #
101.SCH XBRL Taxonomy Extension Schema #
101.CAL XBRL Taxonomy Extension Calculation Linkbase #
101.LAB XBRL Taxonomy Extension Label Linkbase #
101.PRE XBRL Taxonomy Extension Presentation Linkbase #
101.DEF XBRL Taxonomy Extension Definition Linkbase #
*
+
#
##
Confidential portions of this document have been redacted and have been separately filed
with the Securities and Exchange Commission.
Indicates management contract or compensatory plan or arrangement.
Filed herewith.
Furnished herewith.
90
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly
caused this annual report to be signed on its behalf by the undersigned thereunto duly authorized, in the City of
Ewing, State of New Jersey, on March 13, 2014.
ANTARES PHARMA, INC.
/s/Paul K. Wotton
Dr. Paul K. Wotton
President and Chief Executive Officer
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, this annual report has
been signed by the following persons on behalf of the registrant in the capacities indicated on March 13, 2014.
Signature
Title
/s/Paul K. Wotton
Dr. Paul K. Wotton
/s/Robert F. Apple
Robert F. Apple
/s/Leonard S. Jacob
Dr. Leonard S. Jacob
/s/Thomas J. Garrity
Thomas J. Garrity
/s/Jacques Gonella
Dr. Jacques Gonella
/s/Anton G. Gueth
Anton G. Gueth
/s/Eamonn P. Hobbs
Eamonn P. Hobbs
/s/Marvin Samson
Marvin Samson
/s/Robert P. Roche, Jr.
Robert P. Roche, Jr.
President and Chief Executive Officer, Director
(Principal Executive Officer)
Executive Vice President and Chief Financial Officer
(Principal Financial and Accounting Officer)
Director, Chairman of the Board
Director
Director
Director
Director
Director
Director
91