StrateGiC FoCuS
2007
annual report
Who We are
We Supply proDuCtS and services to
the heavy duty truck, construction, military,
bus and other commercial vehicle and
specialty markets
table oF ContentS
processes, markets, products
letter to the Stockholdes
research and Development
new acquisitions
Global presence
Financial highlights
executive management
Director and Committee information
investor information
2
4
6
7
8
10
12
14
15
2007| annual report
MARKETS | products| processes
oem heaVy truCk
oem ConStruCtion
other CommerCial VehiCle
anD SpeCialty marketS
Suspension & Static Seats, Steel & aluminum
Suspension & Static Seats, Windshield Wiper
Suspension & Static Seats, Steel & aluminum
Cab Structures & Components, Structural body
Systems, Structural Components, electronic
Cab Structures & Components, Structural body
panels, Sleeper boxes, a-pillars, b-pillars, Door
Wire harnesses, Cab assembly, exterior Sub-
panels, Sleeper boxes, a-pillars, b-pillars, Door
panels, headliners, Wall panels,
instrument
assemblies
panels, Storage Systems, Cabinetry, Flooring
Systems, engine tunnel Covers, Sleeper bunks,
Grab handles, armrests, bumper Facias, Fender
Covers, privacy Curtains, mirrors, Windshield Wiper
Systems, Controls, electronic Wire harnesses,
electronic Switches, Wipers, accessories
Stamped Components
panels, headliners, Wall panels,
instrument
panels, Storage Systems, Cabinetry, Flooring
Systems, Sleeper bunks, Grab handles,
armrests, bumper Facias, Fender Covers,
privacy Curtains, mirrors, Windshield Wiper
Systems, Controls, electronic Wire harnesses,
office Seating, Switches and accessories,
electronic Devices, Seat Covers
Steel & aluminum Stamping, tig Welding, mig
Steel & aluminum Stamping, tig Welding, mig
Steel & aluminum Stamping, tig Welding, mig
Welding, Full Cab body e-coating, injection
Welding, injection molding, low-pressure injection
Welding, product Sequencing, injection molding,
molding,
low-pressure
injection molding,
molding, urethane molding, Compression
low-pressure
injection molding, urethane
urethane molding, Compression molding,
molding, thermoforming, Cutting & Sewing,
molding, Compression molding, thermoforming,
thermoforming, Cutting & Sewing, electronic
electronic Wire Cutting & testing, electrophoretic
Cutting & Sewing, electronic Wire Cutting &
Wire Cutting & testing, resistance Spot Welding,
painting, product Sequencing
testing
product Sequencing, powder-coat painting
$550.0
$468.7
$287.2
(in millions)
$188.2
$147.1
$150.4
$212.0
$179.8
$169.7
$114.8
$229.8
$199.1
$171.0
(in millions)
$33.2
$35.2
$68.3
$51.2
(in millions)
$90.9
$75.3
$100.1
$86.0
2001
2002 2003 2004 2005 2006
2007
2001
2002 2003 2004 2005 2006
2007
2001
2002 2003 2004 2005 2006
2007
S
t
C
u
D
o
r
p
S
e
S
S
e
C
o
r
p
S
e
u
n
e
V
e
r
2
MARKETS | products| processes
oem heaVy truCk
oem ConStruCtion
other CommerCial VehiCle
anD SpeCialty marketS
Suspension & Static Seats, Steel & aluminum
Suspension & Static Seats, Windshield Wiper
Suspension & Static Seats, Steel & aluminum
Cab Structures & Components, Structural body
Systems, Structural Components, electronic
Cab Structures & Components, Structural body
panels, Sleeper boxes, a-pillars, b-pillars, Door
Wire harnesses, Cab assembly, exterior Sub-
panels, Sleeper boxes, a-pillars, b-pillars, Door
panels, headliners, Wall panels,
instrument
assemblies
panels, Storage Systems, Cabinetry, Flooring
Systems, engine tunnel Covers, Sleeper bunks,
Grab handles, armrests, bumper Facias, Fender
Covers, privacy Curtains, mirrors, Windshield Wiper
Systems, Controls, electronic Wire harnesses,
electronic Switches, Wipers, accessories
Stamped Components
panels, headliners, Wall panels,
instrument
panels, Storage Systems, Cabinetry, Flooring
Systems, Sleeper bunks, Grab handles,
armrests, bumper Facias, Fender Covers,
privacy Curtains, mirrors, Windshield Wiper
Systems, Controls, electronic Wire harnesses,
office Seating, Switches and accessories,
electronic Devices, Seat Covers
Steel & aluminum Stamping, tig Welding, mig
Steel & aluminum Stamping, tig Welding, mig
Steel & aluminum Stamping, tig Welding, mig
Welding, Full Cab body e-coating, injection
Welding, injection molding, low-pressure injection
Welding, product Sequencing, injection molding,
molding,
low-pressure
injection molding,
molding, urethane molding, Compression
low-pressure
injection molding, urethane
urethane molding, Compression molding,
molding, thermoforming, Cutting & Sewing,
molding, Compression molding, thermoforming,
thermoforming, Cutting & Sewing, electronic
electronic Wire Cutting & testing, electrophoretic
Cutting & Sewing, electronic Wire Cutting &
Wire Cutting & testing, resistance Spot Welding,
painting, product Sequencing
testing
product Sequencing, powder-coat painting
(in millions)
$188.2
$147.1
$150.4
$212.0
$287.2
$114.8
(in millions)
$33.2
$35.2
$68.3
$51.2
$229.8
$199.1
$171.0
(in millions)
$90.9
$75.3
$100.1
$86.0
KEy AdvAnTAgES
research and Development
Global presence
total Quality production System (tQpS)
2001
2002 2003 2004 2005 2006
2007
2001
2002 2003 2004 2005 2006
2007
2001
2002 2003 2004 2005 2006
2007
S
t
C
u
D
o
r
p
S
e
S
S
e
C
o
r
p
S
e
u
n
e
V
e
r
3
2007| annual report
LETTER
to the Stockholders
DurinG 2007, we confronted an industry-wide volume
reduction in one of our key markets, the north american heavy truck
Class 8 market. this downturn was expected due to the epa emission
related pre-buy during 2006 and was further impacted by the product
mix shift of the total units
produced during the year.
our long-term strategy of
growth and diversification
remains strong. During
three
2007, we made
in
strategic acquisitions
pekm, the truck division
of Gage industries and
Short bark
industries.
pekm provides us with
a new
truck customer
in German-based man
and also a platform for
international
growth
with additional global
truck and construction
customers.
pekm’s
facilities
in the ukraine
and Czech republic give
our Company a better
position in Central and
eastern europe, access to new markets and a low-cost producer to
help us further diversify from the cyclicality of the north american truck
market. the Gage industries acquisition was an opportunity to acquire
a competing business, diversify our product and process portfolio and
solve a supply issue for a key customer. Finally, our acquisition of
Short bark industries allows us to remove a supply-related issue while
at the same time utilize their processes and capabilities to enhance
our internal cut and sew capabilities in the future.
Dedication to our growth and diversification strategy is evident in
what we have been able to accomplish by broadening our customers,
markets and products. Since 2001, we have broadened
our customer concentration from two to five customers with
10% or more of our total revenues, while at the same time
increasing our total revenues with our top five customers
by more than 150%. We have increased our market
concentration in the construction sector from approximately
12% in 2001 to 26% in 2007 while minimizing our exposure
to the oem heavy truck market from 54% to 41% of our total
revenues. lastly, we have increased our total core product
portfolio from three to five over the same period. none of
these accomplishments are possible without remaining
dedicated to our strategy, to which we intend to remain
committed.
facility
We continue to focus on the advancement of our global
manufacturing and technical capabilities. During this
past year, we completed the construction of our new
manufacturing
in agua prieta, mexico which
combines three facilities into one as well as provides us with
a world-class operation in a low-cost region of the world.
in addition, we also completed construction of our global
research and development and technical center in new
albany, oh which consolidates four facilities and offices
into one as well as provides us with a world-class technical
facility for the future advancement of our products and a
showcase of our capabilities as a global organization.
our company remains strong despite the market driven
impacts we faced during this past year. our management
team and all of our employees are dedicated to our long-
term growth strategy as we continue to focus heavily on
continuous improvements and profitability enhancements
with the goal of becoming an even more prominent global
supplier to the commercial vehicle markets around the
world.
Sincerely,
mervin Dunn
4
CuSToMER PEnETRATion
PRoduCT divERSifiCATion
paCCar
international
Caterpillar
Volvo / mack
Freightliner
oshkosh truck
komatsu
Deere & Co.
2001
16%
8%
4%
9%
21%
< 1%
2%
< 1%
2007
14%
11%
11%
11%
11%
4%
3%
3%
“
Dedication to our growth
and diversification strategy
is evident in what we have
been able to accomplish by
broadening our customers,
markets and products.
“
2001
trim Systems and
Components
25%
23%
Wipers, Controls,
mirrors
3 Core Products in 2001
52%
Seats and Seating
Systems
2007
trim Systems and
Components
16%
electronic Wire
harnesses
19%
Cab Structures
and Components
22%
8%
Wipers, Controls,
mirrors
35%
Seats and Seating
Systems
5 Core Products in 2007
5
2007| annual report
RESEARCh
and Development
DeVelopinG neW proDuCtS anD teChnoloGieS
to take advantage of cross-selling opportunities to
increase product content and market penetration
Dedicated 39,000 Square Foot Facility
• Secure Customer Project Bays
• Vibration and Testing Equipment
• Prototyping and Benchmarking
• Acoustic and Thermal Analysis
• Driving Simulator
• Rapid Prototyping
6
nEw
acquisitions
Short bark
tennessee
Seating Covers
Cut and Sew
GaGe inDuStrieS
oregon
Storage Systems
Cabinetry
engine tunnel Covers
pekm
Czech republic
ukraine
electronic Wire harnesses
2007
•
•
•
acquisition of
aSC, inc.
acquisition
of landmark
industries
Formation of
trim Systems
1997
1999
2001
2003
•
•
•
acquisition of
mayflower
acquisition of
monona Wire
acquisition of
Cabarrus plastics
2005
1998
•
•
acquisition of
r-Squared
acquisition of
tempress, inc.
2000
•
•
•
acquisition of
national Seating
acquisition of
Sprague Devices
acquisition of kab
Seating
2002
2004
•
•
CVG initial
public offering
opening of
CVG Shanghai
2006
•
•
Sale of monona
medical harness
acquisition of Cieb
7
2007| annual report
gLobAL
presence
europe
belGium
Seneffes (brussels)
CzeCh republiC
prague
brandys nad orlici
liberec
uniteD kinGDom
northampton
ukraine
kamyanets-podilsky
north ameriCa
uniteD StateS
arizona
Douglas
illinois
aurora
Dekalb
indiana
michigan City
iowa
monona
edgewood
michigan
Wixom
north Carolina
Concord
kings mountain
Statesville
tennessee
Vonore
pikeville
tellico plains
ohio
bellaire
Chillicothe
Dublin
new albany
norwalk
Shadyside
oregon
Canby
lake oswego
tigard
Virginia
Dublin
Washington
Seattle
tacoma
Vancouver
mexiCo
agua prieta
8
presence
europe
belGium
Seneffes (brussels)
CzeCh republiC
prague
liberec
brandys nad orlici
uniteD kinGDom
northampton
ukraine
kamyanets-podilsky
aSia
China
Shanghai
2007| annual report
auStralia
adelaide
brisbane
melbourne
mackay
9
finAnCiAL
highlights
CommerCial VehiCle Group
remains committed to a disciplined approach to fiscal
responsibility through detailed planning and continuous
improvement. this approach has been a successful
roadmap in providing us with the financial strength to
continue our growth and diversification strategy, both
organically and through acquisitions, during cyclical
periods in our key markets.
We constantly strive for ways to continuously improve
our competitive position and diversify our product,
customer and market portfolio while enhancing our long-
term profitability. During this past year, we made several
strategic decisions, including the consolidation and
closure of key manufacturing and assembly operations
revenues
operating income
net income (loss)
2003
2004
2005
2006
2007
$ 287,579
$ 380,445
$ 754,481
$ 918,751
$ 696,786
25,229
31,532
89,528
97,474
18,821
3,964
17,449
49,411
58,050
(3,251)
Fully Diluted earnings (loss) per Share
$ 0.29
$ 1.12
$ 2.51
$ 2.69
$ (0.15)
total assets
Working Capital (1)
total Debt
210,495
225,638
543,883
590,822
599,089
28,216
41,727
119,104
135,368
117,172
127,474
53,925
191,009
162,114
159,725
total Stockholders investment
34,806
111,046
202,077
264,905
265,335
Capital expenditures, net
5,967
8,907
20,669
22,389
17,274
(1) Current assets less current liabilities
10
as well as the completion of three acquisitions. in addition, our
focus on end-market diversification enables us to minimize the
impact of cyclical markets such as the north american heavy
truck market, or any other markets in which we participate.
this is evidenced by revenue growth of approximately 442% in
our oem Construction markets since 2001 and revenue growth
of approximately 153% in our other commercial vehicle and
specialty markets since 2001.
We believe strongly in our strategic direction, along with
our detailed approach to cost management, planning and
continuous improvement, and that we are well positioned to
drive future growth and success while increasing stockholder
value.
Sincerely,
Chad m. utrup
“
We constantly strive for ways
to continuously improve our
competitive position and diversify
our product, customer and market
portfolio while enhancing our
“
long-term profitability.
revenue ($ in millions)
oEM Truck
95% Growth
$600
$600
$500
$500
$400
$400
$300
$300
$200
$200
$100
$100
$0
$0
2001 2002 2003 2004 2005 2006 2007
oEM ConSTRuCTion
442% Growth
$200
$200
$200
$150
$150
$150
$100
$100
$100
$50
$50
$50
$0
$0
$0
$250
$250
$200
$200
$150
$150
$100
$100
$50
$50
$0
$0
2001 2002 2003 2004 2005 2006 2007
2001 2002 2003 2004 2005 2006 2007
oThER1
153% Growth
2001 2002 2003 2004 2005 2006 2007
1 bus, agriculture, military, Specialty, aftermarket,
oem Service and other markets
2007| annual report
11
EXECuTivE
management
ChAd M. uTRuP
CFo
JAMES f. wiLLiAMS
Vice president
human resources
goRdon boyd
president
Global Construction
MERvin dunn
president & Ceo
12
management
JERRy ARMSTRong
president
Global truck
KEvin R.L. fRAiLEy
executive Vice president
business Development
For the paSt year,
our executive management
team has focused on integrating
our recent acquisitions, organic
growth, cost management,
strategic planning and
continuous improvement to
benefit our customers and
stockholders.
13
2007| annual report
boARd
of Directors
SCott D. rueD
Chairman of the board
independent
SCott C. arVeS
audit Committee
Compensation Committee
independent
DaViD r. boVee
audit Committee Chairman
nominating & Corporate Governance Committee
independent
merVin Dunn
president &
Chief executive officer
robert C. GriFFin
nominating & Corporate Governance Committee Chairman
audit Committee
Compensation Committee
independent
S. a. (tony) JohnSon
independent
riCharD a. Snell
Compensation Committee Chairman
nominating & Corporate Governance Committee
independent
14
of Directors
15
2007| annual report
invESToR
information
additional Copies
Copies of this annual report,
along with our periodic filings
with the Securities and exchange Commission
including Forms 10-k (excluding exhibits) and 10-Q,
are available on our website. printed copies are also
available upon request, free of charge, by contacting:
Chad m. utrup
Chief Financial officer
Commercial Vehicle Group, inc.
7800 Walton parkway
new albany, oh 43054
614.289.5360
Common Stock information
ticker Symbol: CVGi
exchange: naSDaQ
independent registered public accountants
Deloitte & Touche LLP • Minneapolis, MN
transfer agent & registrar
Computershare trust Company, na
p. o. box 43078
providence. ri 02940-3010
781.575.2879
www.computershare.com
annual meeting of Stockholders
the meeting will be held: tuesday, may 20, 2008
location: CVG Corporate hQ and r&D Center
78oo Walton parkway
new albany, oh 43054
time: 1:00 pm eSt
official notice of the annual meeting and a proxy
Statement will be mailed to stockholders.
2007| annual report
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended:
December 31, 2007
Commission file number:
000-50890
COMMERCIAL VEHICLE GROUP, INC.
(Exact name of Registrant as specified in its charter)
Delaware
(State of Incorporation)
41-1990662
(I.R.S. Employer Identification No.)
7800 Walton Parkway
New Albany, Ohio
(Address of Principal Executive Offices)
43054
(Zip Code)
Registrant’s telephone number, including area code:
(614) 289-5360
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
Name of Exchange on Which Registered
Common Stock, par value $.01 per share
The Nasdaq Global Select Market
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant
is a well-known seasoned issuer, as defined in Rule 405 of the Securities
Act. Yes n
No ¥
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Schedule 15(d) of the
Act. Yes n
No ¥
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities
Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and
(2) has been subject to such filing requirements for the past 90 days. Yes ¥
No n
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not
be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of
this Form 10-K or any amendment to this Form 10-K. n
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller
reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of
the Exchange Act. (Check one):
Large accelerated filer n Accelerated filer ¥
Non-accelerated filer n
(Do not check if a smaller reporting company)
Smaller reporting Company n
Indicate by check mark whether
No ¥
Act). Yes n
the registrant
is a shell company (as defined in Rule 12b-2 of
the Exchange
The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at
which the common equity was last sold on June 30, 2007, was $405,328,271.
As of February 29, 2008, 22,054,372 shares of Common Stock of the Registrant were outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Information required by Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K are incorporated by reference
from the Registrant’s Proxy Statement for its annual meeting to be held May 20, 2008 (the “2008 Proxy Statement”).
COMMERCIAL VEHICLE GROUP, INC.
Annual Report on Form 10-K
Table of Contents
PART I
Item 1.
Business . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 1A. Risk Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 1B. Unresolved Staff Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 2.
Legal Proceedings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 3.
Submission of Matters to a Vote of Security Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 4.
PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases
of Equity Securities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 6.
Selected Financial Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations . . .
Item 7A. Quantitative and Qualitative Disclosures About Market Risk . . . . . . . . . . . . . . . . . . . . . . . . .
Financial Statements and Supplementary Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 8.
Item 9.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure . . .
Item 9A. Controls and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 9B. Other Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PART III
Item 10. Directors, Executive Officers and Corporate Governance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 11. Executive Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder
Item 12.
Matters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 13. Certain Relationships, Related Transactions and Director Independence . . . . . . . . . . . . . . . . .
Principal Accountant Fees and Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 14.
Page
1
17
26
26
27
27
28
31
34
48
50
94
94
97
97
99
100
100
100
Item 15. Exhibits and Financial Statements Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIGNATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
101
106
PART IV
i
CERTAIN DEFINITIONS
All references in this Annual Report on Form 10-K to the “Company,” “Commercial Vehicle Group,” “CVG,”
“we,” “us,” and “our” refer to Commercial Vehicle Group, Inc. and its consolidated subsidiaries (unless the context
otherwise requires).
FORWARD-LOOKING INFORMATION
This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 21E of
the Securities Exchange Act of 1934, as amended. For this purpose, any statements contained herein that are not
statements of historical fact, including without limitation, certain statements under “Item 1 — Business” and
“Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations” and located
elsewhere herein regarding industry prospects and our results of operations or financial position, may be deemed to
be forward-looking statements. Without limiting the foregoing, the words “believes,” “anticipates,” “plans,”
“expects,” and similar expressions are intended to identify forward-looking statements. The important factors
discussed in “Item 1A — Risk Factors,” among others, could cause actual results to differ materially from those
indicated by forward-looking statements made herein and presented elsewhere by management from time to time.
Such forward-looking statements represent management’s current expectations and are inherently uncertain.
Investors are warned that actual results may differ from management’s expectations. Additionally, various
economic and competitive factors could cause actual results to differ materially from those discussed in such
forward-looking statements, including, but not limited to, factors which are outside our control, such as risks
relating to (i) our ability to develop or successfully introduce new products; (ii) risks associated with conducting
business in foreign countries and currencies; (iii) general economic or business conditions affecting the markets in
which we serve; (iv) increased competition in the heavy-duty truck or construction market; and (v) our failure to
complete or successfully integrate additional strategic acquisitions. All subsequent written and oral forward-
looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by such
cautionary statements.
ii
PART I
Item 1. Business
Overview
Commercial Vehicle Group, Inc. (a Delaware corporation formed in August 2002) and its subsidiaries, is a
leading supplier of fully integrated system solutions for the global commercial vehicle market, including the heavy-
duty truck market, the construction and agriculture markets and the specialty and military transportation markets.
Our products include static and suspension seat systems, interior trim systems (including instrument panels, door
panels, headliners, cabinetry and floor systems), cab structures and components, mirrors, wiper systems, electronic
wire harness assemblies and controls and switches specifically designed for applications in commercial vehicles.
We are differentiated from suppliers to the automotive industry by our ability to manufacture low volume
customized products on a sequenced basis to meet the requirements of our customers. We believe that we have the
number one or two position in most of our major markets and that we are the only supplier in the North American
commercial vehicle market that can offer complete cab systems including cab body assemblies, sleeper boxes, seats,
interior trim, flooring, wire harnesses, panel assemblies and other structural components. We believe our products are
used by virtually every major North American commercial vehicle original equipment manufacturer (“OEM”), which
we believe creates an opportunity to cross-sell our products and offer a fully integrated system solution.
Demand for our products is generally dependent on the number of new commercial vehicles manufactured,
which in turn is a function of general economic conditions, interest rates, changes in governmental regulations,
consumer spending, fuel costs and our customers’ inventory levels and production rates.
New commercial vehicle demand in the North American Class 8 truck market has historically been cyclical
and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the
freight tonnage hauled by commercial vehicles. Production of Class 8 heavy trucks in North America initially
peaked in 1999 and experienced a downturn from 2000 to 2003 that was due to a weak economy, an oversupply of
new and used vehicle inventory and lower spending on commercial vehicles and equipment. Demand for
commercial vehicles improved from 2004 to 2006 due to broad economic recovery in North America, corre-
sponding growth in the movement of goods, the growing need to replace aging truck fleets and OEMs receiving
larger than expected pre-orders in anticipation of the new EPA emissions standards becoming effective in 2007.
During 2007, the demand for North American Class 8 heavy trucks experienced a downturn as a result of pre-orders
in 2006 and general weakness in the North American economy and corresponding decline in the need for
commercial vehicles to haul freight tonnage in North America.
New commercial vehicle demand in the global construction equipment market generally follows certain
economic conditions around the world. Within the construction market, there are two classes of construction
equipment, the medium/heavy equipment market (weighing over 12 metric tons) and the light construction
equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market
is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors,
hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based
industries. Demand in the light construction equipment market is typically related to certain economic conditions
such as the level of housing construction and other smaller-scale developments and projects. Our products are
primarily used in the medium/heavy construction equipment markets.
Recent Acquisitions
In October 2007, we acquired all of the outstanding common stock of PEKM Kabeltechnik s.r.o. (“PEKM”),
an electronic wire harness manufacturer primarily for the commercial truck market, with facilities in the Czech
Republic and the Ukraine.
In October 2007, we acquired the heavy-gauge thermoforming and injection molding assets of the Fabrication
Division of Gage Industries, Inc. (“Gage”).
1
In December 2007, we acquired substantially all of the assets of Short Bark Industries, LLC (“SBI”), a supplier
of seat covers and various cut-and-sew trim products.
See Note 3 to our consolidated financial statements contained in Item 8 of this Annual Report on Form 10-K
for detailed information on these transactions.
Industry
Within the commercial vehicle industry, we sell our products primarily to the North American heavy truck
OEM market (approximately 41% of our 2007 revenues), the global construction OEM market (approximately 26%
of our 2007 revenues) and the aftermarket and OEM service organizations (approximately 13% of our 2007
revenues). The majority of our remaining 20% of 2007 revenues was derived primarily from other global
commercial vehicle and specialty markets.
Commercial Vehicle Supply Market Overview
Commercial vehicles are used in a wide variety of end markets, including local and long-haul commercial
trucking, bus, construction, mining, general industrial, marine, municipal and recreation. The commercial vehicle
supply industry can generally be separated into two categories: (1) sales to OEMs, in which products are sold in
relatively large quantities directly for use by OEMs in new commercial vehicles; and (2) “aftermarket” sales, in
which products are sold as replacements in varying quantities to a wide range of OEM service organizations,
wholesalers, retailers and installers. In the OEM market, suppliers are generally divided into tiers — “Tier 1”
suppliers (like our company), who provide their products directly to OEMs, and “Tier 2” or “Tier 3” suppliers, who
sell their products principally to other suppliers for integration into those suppliers’ own product offerings.
Our largest end market, the commercial truck and construction industry, is supplied by heavy- and medium-
duty commercial vehicle suppliers as well as automotive suppliers. The commercial vehicle supplier industry is
highly fragmented and comprised of several large companies and many smaller companies. In addition, the
commercial vehicle supplier industry is characterized by relatively low production volumes as well as considerable
barriers to entry, including the following: (1) significant investment requirements, (2) stringent technical and
manufacturing requirements, (3) high transition costs to shift production to new suppliers, (4) just-in-time delivery
requirements and (5) strong brand name recognition. Foreign competition is limited in the commercial vehicle
market due to many factors, including the need to be responsive to order changes on short notice, high shipping
costs, customer concerns about quality given the safety aspect of many of our products and service requirements.
Although OEM demand for our products is directly correlated with new vehicle production, suppliers like us can also
grow by increasing their product content per vehicle through cross selling and bundling of products, further penetrating
business with existing customers, gaining new customers and expanding into new geographic markets and by increasing
aftermarket sales. We believe that companies with a global presence and advanced technology, engineering, manufacturing
and support capabilities, such as our company, are well positioned to take advantage of these opportunities.
North American Commercial Truck Market
Purchasers of commercial trucks include fleet operators, owner operators and other industrial end users.
Commercial vehicles used for local and long-haul commercial trucking are generally classified by gross vehicle
weight. Class 8 vehicles are trucks with gross vehicle weight in excess of 33,000 lbs. and Class 5 through 7 vehicles
are trucks with gross vehicle weight from 16,001 lbs. to 33,000 lbs. The following table shows commercial vehicle
production levels for 2001 through 2007 in North America:
2001
2002
Class 8 heavy trucks . . . . . . . . . . . . . . . . . . . . . .
Class 5-7 light and medium-duty trucks. . . . . . . .
146
189
Total
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
335
181
194
375
2003
2005
2004
(Thousands of units)
341
269
182
245
225
188
370
494
586
2006
2007
378
266
644
212
206
418
Source: ACT Publications, The Commercial Truck, Bus and Trailer Industry OUTLOOK (February 2008).
2
The following describes the major segments of the commercial vehicle market in which we compete:
Class 8 Truck Market
The global Class 8 truck manufacturing market is concentrated in three primary regions: North America, Asia-
Pacific and Europe. The global Class 8 truck market is localized in nature due to the following factors: (1) the
prohibitive costs of shipping components from one region to another, (2) the high degree of customization of Class 8
trucks to meet the region-specific demands of end users, and (3) the ability to meet just-in-time delivery
requirements. According to ACT, four companies represented approximately 96% of North American Class 8
truck production in 2007. The percentages of Class 8 production represented by Freightliner, PACCAR, Inter-
national and Volvo/Mack were approximately 34%, 27%, 19% and 16%, respectively. We supply products to all of
these OEMs.
Production of commercial vehicles in North America initially peaked in 1999 and experienced a downturn
from 2000 to 2003 that was due to a weak economy, reduced sales following above-normal purchases in advance of
new EPA emissions standards that became effective in October 2002, an oversupply of new and used vehicle
inventory and lower spending on commercial vehicles and equipment. Following a substantial decline from 1999 to
2001, Class 8 truck unit production increased modestly to approximately 181,000 units in 2002 from approximately
146,000 units in 2001, due primarily to the purchasing of trucks that occurred prior to the October 2002 mandate for
more stringent engine emissions requirements. Subsequent to the engine emissions requirements, truck production
continued to remain at historically low levels through mid-2003 due to continuing economic weakness and the
reluctance of many trucking companies to invest during this period.
In mid-2003, evidence of renewed growth emerged and truck tonmiles (number of miles driven multiplied by
number of tons transported) began to increase, along with new truck sales. During the second half of 2003, new
truck dealer inventories declined and, consequently, OEM truck order backlogs began to increase. According to
ACT, monthly truck order rates began increasing significantly from December 2003 through 2005. In 2006, OEMs
received larger than expected pre-orders in anticipation of the new EPA emissions standards becoming effective in
2007. During 2007, the demand for North American Class 8 heavy trucks experienced a downturn as a result of 2006
pre-orders, a general weakness in the North American economy and corresponding decline in the need for
commercial vehicles to haul freight tonnage in North America.
The following table illustrates North American Class 8 truck build for the years 1998 to 2012:
North American Class 8 Truck Build Rates
(In thousands)
333
267
252
181
182
146
378
341
269
327
317
300
224
212
243
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008 E
2009 E
2010 E
2011 E
2012 E
“E” — Estimated
Source: ACT Publications, Five Year Forecast (February 2008).
3
According to ACT, unit production for 2008 is estimated to increase approximately 5.7% from 2007 levels to
approximately 224,000 units. We believe that the decrease from 2006 to 2007 was impacted by the more stringent
EPA emissions standards becoming effective in early 2007 as well as a general weakness in the North American
economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America.
We believe the following factors are currently driving the North American Class 8 truck market:
Economic Conditions. The North American truck industry is directly influenced by overall economic growth
and consumer spending. Since truck OEMs supply the fleet lines of North America, their production levels
generally match the demand for freight. The freight carried by these trucks includes consumer goods, machinery,
food and beverages, construction equipment and supplies, electronic equipment and a wide variety of other
materials. Since most of these items are driven by macroeconomic conditions, the truck industry tends to follow
trends of gross domestic product (“GDP”). Generally, given the dependence of North American shippers on
trucking as a freight alternative, general economic conditions have been a primary indicator of future truck builds.
Truck Freight Growth. ACT projects that total domestic truck freight will continue to increase over the next
five years, driven by growth in GDP. In addition, national suppliers and distribution centers, burdened by the pricing
pressure of large manufacturing and retail customers, have continued to reduce on-site inventory levels. This
reduction requires freight handlers to provide “to-the-hour” delivery options. As a result, Class 8 trucks have
replaced manufacturing warehouses as the preferred temporary storage facility for inventory. Since trucks are
typically viewed as the most reliable and flexible shipping alternative, truck tonmiles, as well as truck platform
improvements, should continue to increase in order to meet the increasing need for flexibility under a just-in-time
system. ACT forecasts that total U.S. Class 8 truck tonmiles will increase from 3.7 million in 2007 to 4.0 million in
2012, as summarized in the following graph:
Total U.S. Tonmiles (Class 8)
(Number of tonmiles in millions)
2.87
2.97
3.09
3.10
3.12
3.22
3.38
3.63
3.75
3.68
3.75
3.81
3.85
3.94
4.02
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008E
2009E
2010E
2011E
2012E
“E” — Estimated
Source: ACT Publications, Five Year Forecast (February 2008).
Truck Replacement Cycle and Fleet Aging. Since 1998, the average age of active Class 8 trucks has increased
from approximately 5.5 years in 1998 to approximately 6.0 years in 2007. The average fleet age tends to run in
cycles as freight companies permit their truck fleets to age during periods of lagging demand and then replenish
those fleets during periods of increasing demand. Additionally, as truck fleets age, their maintenance costs typically
increase. Freight companies must therefore continually evaluate the economics between repair and replacement.
Other factors, such as inventory management and the growth in less-than-truckload freight shipping, also tend to
4
increase fleet mileage and, as a result, the truck replacement cycle. The chart below illustrates the average age of
active U.S. Class 8 trucks:
Average Age of Active U.S. Class 8 Trucks
(Number of years)
5.5
5.3
5.3
5.5
5.7
5.9
5.8
5.8
5.7
6.0
6.1
6.0
6.0
6.0
6.0
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008 E
2009 E
2010 E
2011 E
2012 E
“E” — Estimated
Source: ACT Research (2008).
Commercial Truck Aftermarket
Demand for aftermarket products tends to be counter cyclical to OEM demand because vehicle owners are
more likely to repair vehicles than purchase new ones during recessionary periods. Therefore, aftermarket demand
moderately increases during such periods. Demand for aftermarket products is driven by the quality of OEM parts,
the number of vehicles in operation, the average age of the vehicle fleet, vehicle usage, the average useful life of
vehicle parts and total truck tonmiles. The aftermarket is a growing market, as the overall size of the North
American fleet of Class 8 trucks has continued to increase and is attractive because of the recurring nature of the
sales. Additionally, aftermarket sales tend to be at a higher margin, as truck component suppliers are able to leverage
their already established fixed cost base and exert moderate pricing power with their replacement parts. The
recurring nature of aftermarket revenue provides some insulation to the overall cyclical nature of the industry, as it
tends to provide a more stable stream of revenues.
Commercial Construction Vehicle Market
New commercial vehicle demand in the global construction equipment market generally follows certain
economic conditions around the world. Within the construction market, there are two classes of construction
equipment: the medium/heavy equipment market (weighing over 12 metric tons) and the light construction
equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market
is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors,
hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based
industries. Demand in the light construction equipment market is typically related to certain economic conditions
such as the level of housing construction and other smaller-scale developments and projects. Our products are
primarily used in the medium/heavy construction equipment markets.
Purchasers of medium/heavy construction equipment include construction companies, municipalities, local
governments, rental fleet owners, quarrying and mining companies and forestry related industries. Purchasers of
light construction equipment include contractors, rental fleet owners, landscapers, logistics companies and farmers.
5
Military Equipment Market
We supply products for heavy- and medium-payload tactical trucks that are used by various military
customers. Sales and production of these vehicles can be influenced by overall defense spending both by the
U.S. government and foreign governments and the presence of military conflicts and potential military conflicts
throughout the world. Demand for these vehicles is expected to increase as the result of the continuing conflict in the
Middle East. In addition, demand has increased for remanufacturing and replacement of the large fleet of vehicles
that have served in the Middle East due to over-use and new armor and technology requirements.
Commercial Vehicle Industry Trends
Our performance and growth are directly related to trends in the commercial vehicle market that are focused on
driver retention, comfort and safety. These commercial vehicle industry trends include the following:
System Sourcing. Commercial vehicle OEMs are seeking suppliers capable of providing fully-engineered,
complete systems rather than suppliers who produce the separate parts that comprise a system. By outsourcing
complete systems, OEMs are able to reduce the costs associated with the design and integration of different
components and improve quality by requiring their suppliers to assemble and test major portions of the vehicle prior
to beginning production. In addition, OEMs are able to develop more efficient assembly processes when complete
systems are delivered in sequence rather than as individual parts or components.
Globalization of Suppliers. To serve multiple markets more cost effectively, commercial vehicle OEMs are
beginning to standardize global vehicle platforms to be manufactured and sold in various geographic markets
around the world. Having operations in the geographic markets in which OEMs produce their global platforms
enables suppliers to meet OEMs’ needs more economically and more efficiently.
Shift of Design and Engineering to Suppliers. OEMs are focusing their efforts on brand development and
overall vehicle design, instead of the design of individual vehicle systems. OEMs are increasingly looking to their
suppliers to provide suggestions for new products, designs, engineering developments and manufacturing pro-
cesses. As a result, strategic suppliers are gaining increased access to confidential planning information regarding
OEMs’ future vehicle designs and manufacturing processes. Systems and modules increase the importance of
strategic suppliers because they generally increase the percentage of vehicle content.
Broad Manufacturing Capabilities. With respect to commercial vehicle interiors, OEMs are requiring their
suppliers to manufacture interior systems and products utilizing alternative materials and processes in order to meet
OEMs’ demand for customized styling or cost requirements. In addition, while OEMs seek to differentiate their
vehicles through the introduction of innovative interior features, suppliers are proactively developing new interior
products with enhanced features.
Ongoing Supplier Consolidation. We believe the worldwide commercial vehicle supply industry is con-
tinuing to consolidate as suppliers seek to achieve operating synergies through business combinations, shift
production to locations with more flexible work rules and practices, acquire complementary technologies, build
stronger customer relationships and follow their OEM customers as they expand globally. Suppliers need to provide
OEMs with single-point sourcing of integrated systems and modules on a global basis, and this is expected to drive
further industry consolidation. Furthermore, the cost focus of most major OEMs has forced suppliers to reduce costs
and improve productivity on an ongoing basis, including economies of scale through consolidation.
Competitive Strengths
We believe that our competitive strengths include, but are not limited to, the following:
Leading Market Positions and Brands. We believe that we are the leading supplier of seating systems and
soft interior trim products, the only non-captive manufacturer of Class 8 truck body systems (which includes cab
body assemblies) for the North American commercial vehicle heavy-truck market and one of the largest global
suppliers of construction vehicle seating systems. Our products are marketed under brand names that are well
known by our customers and truck fleet operators based upon the amount of revenue we derive from sales to these
6
markets. These brands include KAB Seating, National Seating, Trim Systems, Sprague Controls, Sprague
Devices», PrutsmanTM, Moto Mirror», RoadWatch», and Mayflower».
Comprehensive Cab Product and Cab System Solutions. We believe that we offer the broadest product range
of any commercial vehicle cab supplier. We manufacture a broad base of products, many of which are critical to the
interior and exterior subsystems of a commercial vehicle cab. We believe we are the only supplier worldwide with
the capability to manufacture and offer complete cab systems in sequence, integrating interior trim and seats with
the cab structure and the electronic wire harness and instrument panel assemblies. We also utilize a variety of
different processes, such as urethane molding, injection molding, Virtual Engineered Composites (“VEC”) large
composite molding, thermoforming and “twin- sheet” vacuum forming that enable us to meet each customer’s
unique styling and cost requirements. The breadth of our product offering enables us to provide a “one-stop shop”
for our customers, who increasingly require complete cab solutions from a single supply source. As a result, we
believe that we have a substantial opportunity for further customer penetration through cross-selling initiatives and
by bundling our products to provide complete system solutions.
End-User Focused Product Innovation. We believe that commercial vehicle market OEMs continue to focus
on interior and exterior product design, comfort and features to better serve their end user, the driver, and our
customers are seeking suppliers that can provide product innovation. We have a full service engineering and product
development organization to assist OEMs in meeting their needs which helps enable us to secure content on current
platforms and models.
Flexible Manufacturing Capabilities and Cost Competitive Position. Because commercial vehicle OEMs
permit their customers to select from an extensive menu of cab options, our customers frequently request modified
products in low volumes within a limited time frame. We have a highly variable cost structure and can efficiently
leverage our flexible manufacturing capabilities to provide low volume, customized products to meet each
customer’s styling, cost and just-in-time delivery requirements. We manufacture or assemble our products at
facilities in North America, Europe, China and Australia. Several of our facilities are located near our customers to
reduce distribution costs and to maintain a high level of customer service and flexibility.
Global Capabilities. Because many of our customers manufacture and sell their products on a global basis,
we believe we have a strong competitive advantage by having dedicated sales, engineering, manufacturing and
assembly capabilities on a global basis. We have these capabilities to support our customers in North America,
Europe, China and Australia.
Strong Free Cash Flow Generation. Our business generates strong free cash flow, as it benefits from modest
capital expenditure and working capital requirements. Over the three years ended December 31, 2007, our
consolidated capital expenditures averaged $20.1 million per year, which amounts to approximately 2.5% of
consolidated net revenues.
Strong Relationships with Leading Customers and Major Fleets. Because of our comprehensive product
offerings, brand names and innovative product features, we believe we are an important long-term global supplier to
many of the leading heavy-truck, construction and specialty commercial vehicle manufacturers such as Paccar,
International, Caterpillar, Freightliner, Volvo/Mack., Oshkosh Truck, Komatsu and Deere & Co. In addition,
through our sales force and engineering teams, we maintain active relationships with the major heavy-duty truck
fleet organizations that are end users of our products such as Yellow Roadway Corp., Swift Transportation,
Schneider National and Ryder Leasing. As a result of our high-quality, innovative products, well-recognized brand
names and customer service, a majority of the largest 100 fleet operators specifically request certain of our products.
Significant Barriers to Entry. We believe we are a leader in providing critical cab assemblies and com-
ponents to long running platforms. Considerable barriers to entry exist, including significant investment and
engineering requirements, stringent technical and manufacturing requirements, high transition costs for OEMs to
shift production to new suppliers, just-in-time delivery requirements and strong brand name recognition.
Proven Management Team. Our management team is highly respected within the commercial vehicle
market, and our six senior executive officers have a combined average of 28 years of experience in the industry. We
believe that our team has substantial depth in critical operational areas and has demonstrated success in reducing
costs, integrating business acquisitions and improving processes through cyclical periods.
7
Strategy
Our primary growth strategies are as follows:
Increase Content, Expand Customer Penetration and Leverage System Opportunities. We believe we are the
only integrated commercial vehicle supplier that can offer complete interior cab systems. We are focused on
securing additional sales from our existing customer base, and we actively cross-market a diverse portfolio of
products to our customers to increase our content on the cabs manufactured by these OEMs. To complement our
North American capabilities and enhance our customer relationships, we are working with OEMs as they increase
their focus on international markets. We have established operations in Europe and Asia and are aggressively
working to secure new business from both existing and new customers. We believe we are well positioned to
capitalize on the migration toward commercial vehicle suppliers that can offer a complete cab systems, solutions
and components.
Leverage Our New Product Development Capabilities. We have made a significant investment in our
engineering capabilities and new product development in order to anticipate the evolving demands of our customers
and end users. For example, we recently launched a new integrated sleeper cab with one of our largest customers
utilizing a highly automated robotic assembly system. Products for this program include all major Class A exterior
stampings, roof assembly and full body E-coat. In addition, we recently developed and launched key products for a
new military specialty vehicle platform including driver, co-driver and passenger seating as well as interior
headliners and windshield wiper systems. We will continue to design and develop new products that add or improve
content and increase cab comfort and safety.
Capitalize on Operating Leverage. We continuously seek ways to lower costs, enhance product quality,
improve manufacturing efficiencies and increase product throughput and we continue to implement our Lean
Manufacturing and Total Quality Production Systems (“TQPS”) programs. We believe our ongoing cost saving
initiatives and sourcing efforts in Europe and Asia will enable us to continue to lower our manufacturing costs. As a
result, we believe we are well positioned to improve our operating margins and capitalize on any volume increases
with minimal additional capital expenditures.
Grow Sales to the Aftermarket. While commercial vehicles have a relatively long life, certain components,
such as seats, wipers and mirrors, are replaced more frequently. We believe that there are opportunities to leverage
our brand recognition to increase our sales to the replacement aftermarket. Since many aftermarket participants are
small and locally focused, we plan to leverage our national presence to increase our market share in the fragmented
aftermarket. We believe that the continued growth in the aftermarket represents an attractive opportunity to
diversify our business due to its relative stability as well as the market penetration opportunity.
Pursue Strategic Acquisitions and Continue to Diversify Revenues. We will selectively pursue comple-
mentary strategic acquisitions that allow us to leverage the marketing, engineering and manufacturing strengths of
our business and expand our revenues to new and existing customers. The markets in which we operate are
fragmented and provide for consolidation opportunities. Our acquisitions have enabled us to become a global
supplier with the capability to offer complete cab systems in sequence, integrating interior trim and seats with the
cab structure, to provide integrated electronic systems into our cab products and to expand the breadth of our interior
systems capabilities. In addition, these acquisitions have allowed us to diversify our revenue base by customer,
market, location or product offering.
Products
We offer OEMs a broad range of products and system solutions for a variety of end market vehicle applications
that include local and long-haul commercial truck, construction, bus, agricultural, military, end market industrial,
marine, municipal, recreation and specialty vehicle. We believe fleets and OEMs continue to focus on cabs and
interiors to differentiate their products and improve driver comfort and retention. Although a portion of our products
are sold directly to OEMs as finished components, we use most of our products to produce “systems” or
“subsystems,” which are groups of component parts located throughout the vehicle that operate together to provide
a specific vehicle function. Systems currently produced by us include cab bodies, sleeper boxes, seating, trim, body
panels, storage cabinets, floor covering, mirrors, windshield wipers, headliners, window lifts, door locks,
8
temperature measurement and wire harnesses. We classify our products into five general categories: (1) seats and
seating systems, (2) trim systems and components, (3) mirrors, wipers and controls, (4) cab structures, sleeper
boxes, body panels and structural components and (5) electronic wire harnesses and panel assemblies.
See Notes 2 and 10 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K for
information on our significant customer revenues and related receivables, as well as revenues by product category
and geographical location.
Set forth below is a brief description of our products and their applications:
Seats and Seating Systems. We design, engineer and produce seating systems primarily for heavy trucks in
North America and for commercial vehicles used in the construction and agricultural industries through our
European and Asian operations. For the most part, our seats and seating systems are fully-assembled and ready for
installation when they are delivered to the OEM. We offer a wide range of seats that include air suspension seats,
static seats and bus seats. As a result of our strong product design and product technology, we are a leader in
designing seats with convenience features and enhanced safety. Seats and seating systems are the most complex and
highly specialized products of our five product categories.
Heavy Truck Seats. We produce seats and seating systems for heavy trucks in our North American
operations. Our heavy truck seating systems are designed to achieve maximum driver comfort by adding a wide
range of manual and power features such as lumbar supports, cushion and back bolsters and leg and thigh supports.
Our heavy truck seats are highly specialized based on a variety of different seating options offered in OEM product
lines. Our seats are built to customer specifications in low volumes and consequently are produced in numerous
combinations with a wide range of price points.
We differentiate our seats from our competitors’ seats by focusing on three principal goals: driver comfort,
driver retention and decreased workers’ compensation claims. Drivers of heavy trucks recognize and are often given
the opportunity to specify their choice of seat brands, and we strive to develop strong customer loyalty both with the
commercial vehicle OEMs and among drivers. We believe that we have superior technology and can offer a unique
seat base that is ergonomically designed, accommodates a range of driver sizes and absorbs shock to maximize
driver comfort.
Construction and Other Commercial Vehicle Seats. We produce seats and seating systems for commercial
vehicles used in the global construction and agricultural, bus, military, commercial transport and municipal
industries. The principal focus of these seating systems is durability. These seats are ergonomically designed for
difficult working environments, to provide comfort and control throughout the range of seats and chairs.
Other Seating Products. We also manufacture office seating products. Our office chair was developed as a
result of our experience supplying chairs for the heavy truck, agricultural and construction industries and is fully
adjustable to maximize comfort at work. Our office chairs are available in a wide variety of colors and fabrics to suit
many different office environments, such as emergency services, call centers, receptions, studios, boardrooms and
general office.
Trim Systems and Components. We design, engineer and produce trim systems and components for the
interior cabs of commercial vehicles. Our interior trim products are designed to provide a comfortable interior for
the vehicle occupants as well as a variety of functional and safety features. The wide variety of features that can be
selected by the heavy truck customer makes trim systems and components a complex and highly specialized
product category. Set forth below is a brief description of our principal trim systems and components:
Trim Products. Our trim products include A-Pillars, B-Pillars, door panels and interior trim panels. Door
panels and interior trim panels consist of several component parts that are attached to a substrate. Specific
components include vinyl or cloth-covered appliqués, armrests, map pocket compartments, carpet and sound-
reducing insulation. Our products are attractive, lightweight solutions from a traditional cut and sew approach to a
contemporary “molded” styling theme. The parts can be color matched or top good wrapped to integrate seamlessly
with the rest of the interior.
9
Instrument Panels. We produce and assemble instrument panels that can be integrated with the rest of the
interior trim. The instrument panel is a complex system of coverings and foam, plastic and metal parts designed to
house various components and act as a safety device for the vehicle occupant.
Body Panels (Headliners/Wall Panels). Headliners consist of a substrate and a finished interior layer made of
fabrics and materials. While headliners are an important contributor to interior aesthetics, they also provide
insulation from road noise and can serve as carriers for a variety of other components, such as visors, overhead
consoles, grab handles, coat hooks, electrical wiring, speakers, lighting and other electronic and electrical products.
As the amount of electronic and electrical content available in vehicles has increased, headliners have emerged as an
important carrier of electronic features such as lighting systems.
Storage Systems. Our modular storage units and custom cabinetry are designed to improve comfort and
convenience for the driver. These storage systems are designed to be integrated with the interior trim. These units
may be easily expanded and customized with features that include refrigerators, sinks and water reservoirs. Our
storage systems are constructed with durable materials and designed to last the life of the vehicle.
Floor Covering Systems. We have an extensive and comprehensive portfolio of floor covering systems and
dash insulators. Carpet flooring systems generally consist of tufted or non-woven carpet with a thermoplastic
backcoating which, when heated, allows the carpet to be fitted precisely to the interior or trunk compartment of the
vehicle. Additional insulation materials are added to minimize noise, vibration and harshness. Non-carpeted
flooring systems, used primarily in commercial and fleet vehicles, offer improved wear and maintenance char-
acteristics. The dash insulator separates the passenger compartment from the engine compartment and prevents
engine noise and heat from entering the passenger compartment.
Sleeper Bunks. We offer a wide array of design choices for upper and lower sleeper bunks for heavy trucks.
All parts of our sleeper bunks can be integrated to match the rest of the interior trim. Our sleeper bunks arrive at
OEMs fully assembled and ready for installation.
Grab Handles and Armrests. Our grab handles and armrests are designed and engineered with specific
attention to aesthetics, ergonomics and strength. Our products use a wide range of inserts and substrates for
structural integrity. The integral urethane skin offers a soft touch and can be in-mold coated to specific colors.
Privacy Curtains. We produce privacy curtains for use in sleeper cabs. Our privacy curtains include features
such as integrated color matching of both sides of the curtain, choice of cloth or vinyl, full “black out” features and
low-weight.
Mirrors, Wipers and Controls. We design, engineer and produce a wide range of mirrors, wipers and
controls used in commercial vehicles. Set forth below is a brief description of our principal products in this
category:
Mirrors. We offer a wide range of round, rectangular, motorized and heated mirrors and related hardware,
including brackets, braces and side bars. Most of our mirror designs utilize stainless steel body, fasteners and
support braces to ensure durability. We have introduced both road and outside temperature devices that are
integrated into the mirror face or the vehicle’s dashboard through our RoadWatchTM family of products. These
systems are principally utilized by municipalities throughout North America to monitor surface temperatures and
assist them in dispersing chemicals for snow and ice removal.
Windshield Wiper Systems. We offer application-specific windshield wiper systems and individual wind-
shield wiper components for all segments of the commercial vehicle market. Our windshield wiper systems are
generally delivered to the OEM fully assembled and ready for installation. A windshield wiper system is typically
comprised of an electric motor, linkages, arms, wiper blades, washer reservoirs and related pneumatic or electric
pumps. We also supply air-assisted washing systems for headlights and cameras to assist drivers with visibility for
safe vehicle operation. These systems utilize window wash fluid and air to create a turbulent liquid/air stream that
removes road grime from headlights and cameras. We offer an optional programmable washing system that allows
for periodic washing and dry cycles for maximum safety.
Controls. We offer a range of controls and control systems that includes a complete line of window lifts and
door locks, mechanic, pneumatic, electrical and electronic HVAC controls and electric switch products. We
10
specialize in air-powered window lifts and door locks, which are highly reliable and cost effective as compared to
similar electrical products.
Cab Structures, Sleeper Boxes, Body Panels and Structural Components. We design, engineer and produce
complete cab structures, sleeper boxes, body panels and structural components for the commercial vehicle industry
in North America. Set forth below is a description of our principal products in this category:
Cab Structures. We design, manufacture and assemble complete cab structures used primarily in heavy
trucks for the major commercial vehicle OEMs in North America. Our cab structures, which are manufactured from
both steel and aluminum, are delivered to our customers fully assembled and primed for paint. Our cab structures
are built to order based upon options selected by the vehicles’ end-users and delivered to the OEMs, in line
sequence, as these end-users’ trucks are manufactured by the OEMs.
Sleeper Boxes. We design, manufacture and assemble sleeper boxes primarily for heavy trucks in North
America. We manufacture both integrated sleeper boxes that are part of the overall cab structure as well as stand
alone assemblies depending on the customer application. Sleeper boxes are typically constructed using aluminum
exterior panels in combination with steel structural components delivered to our customers in line sequence after the
final seal and E-coat process.
Bumper Fascias, Fender Covers and Fender Liners. Our highly durable, lightweight bumper fascias and
fender covers and liners are capable of withstanding repeated impacts that could deform an aluminum or steel
bumper. We utilize a production technique that chemically bonds a layer of paint to the part after it has been molded,
thereby enabling the part to keep its appearance even after repeated impacts.
Body Panels and Structural Components. We produce a wide range of both steel and aluminum large exterior
body panels and structural components for the internal production of our cab structures and sleeper boxes as well as
being sold externally to certain commercial vehicle OEMs. In addition, we also manufacture composite body panels
utilizing our virtual engineered composite (“VEC”) technology.
Electronic Wire Harnesses and Panel Assemblies. We produce a wide range of electronic wire harnesses
and related assemblies as well as panel assemblies used in commercial vehicles and other equipment. Set forth
below is a brief description of our principal products in this category.
Electronic Wire Harnesses. We offer a broad range of complex electronic wire harness assemblies that
function as the primary current carrying devices used to provide electrical interconnections for gauges, lights,
control functions, power circuits and other electronic applications on a commercial vehicle. Our wire harnesses are
highly customized to fit specific end-user requirements. We provide our wire harnesses for a wide variety of
commercial vehicles, military vehicles, specialty trucks, automotive and other specialty applications, including
heavy-industrial equipment.
Panel Assemblies. We assemble large, integrated components such as panel assemblies and cabinets for
commercial vehicle OEMs and other heavy equipment manufacturers. The panels and cabinets we assemble are
installed in key locations on a vehicle or unit of equipment, are integrated with our wire harness assemblies and
provide user control over certain operational functions and features.
Manufacturing
A description of the manufacturing processes we utilize for each of our principal product categories is set forth
below:
(cid:129) Seats and Seating Systems. Our seating operations utilize a variety of manufacturing techniques whereby
foam and various other components along with fabric, vinyl or leather are affixed to an underlying seat
frame. We also manufacture and assemble the seat frame, which involves complex welding. Generally, we
utilize outside suppliers to produce the individual components used to assemble the seat frame.
(cid:129) Trim Systems and Components. Our interior systems process capabilities include injection molding, low-
pressure injection molding, urethane molding and foaming processes, compression molding, heavy-gauge
thermoforming and vacuum forming as well as various cutting, sewing, trimming and finishing methods.
11
(cid:129) Mirrors, Wipers and Controls. We manufacture our mirrors, wipers and controls utilizing a variety of
manufacturing processes and techniques. Our mirrors, wipers and controls are primarily hand assembled,
tested and packaged.
(cid:129) Cab Structures, Sleeper Boxes, Body Panels and Structural Components. We utilize a wide range of
manufacturing processes to produce the majority of the steel and aluminum stampings used in our cab
structures, sleeper boxes, body panels and structural components and a variety of both robotic and manual
welding techniques in the assembly of these products. In addition, both our Norwalk, Ohio and Kings
Mountain, North Carolina facilities have large capacity, fully automated E-coat paint priming systems
allowing us to provide our customers with a paint-ready cab product. Due to their high cost, full body E-coat
systems, such as ours, are rarely found outside of the manufacturing operations of the major OEMs. The
major large press lines at our Shadyside, Ohio facility provide us with the in-house manufacturing flexibility
for both aluminum and steel stampings delivered just-in-time to our cab assembly plants. This plant also
provides us with low volume forming and processing techniques including laser trim operations that
minimize investment and time to manufacture for low volume applications.
(cid:129) Electronic Wire Harnesses and Panel Assemblies. We utilize several manufacturing techniques to produce
the majority of our electronic wire harnesses and panel assemblies. Our processes, both manual and
automated, are designed to produce complex, low- to medium-volume wire harnesses and panel assemblies
in short time frames. Our wire harnesses and panel assemblies are both electronically and hand tested.
We have a broad array of processes to offer our commercial vehicle OEM customers to enable us to meet their
styling and cost requirements. The vehicle cab is the most significant and appealing aspect to the driver of the
vehicle, and consequently each commercial vehicle OEM has unique requirements as to feel, appearance and
features.
The end markets for our products are highly specialized and our customers frequently request modified
products in low volumes within an expedited delivery timeframe. As a result, we primarily utilize flexible
manufacturing cells at the vast majority of our production facilities. Manufacturing cells are clusters of individual
manufacturing operations and work stations grouped in a circular configuration, with the operators placed centrally
within the configuration. This provides flexibility by allowing efficient changes to the number of operations each
operator performs. When compared to the more traditional, less flexible assembly line process, cell manufacturing
allows us to maintain our product output consistent with our OEM customers’ requirements and reduce the level of
inventory.
When an end-user buys a commercial vehicle, the end-user will specify the seat and other features for that
vehicle. Because each of our seating systems is unique, our manufacturing facilities have significant complexity
which we manage by building in sequence. We build our seating systems as orders are received, and systems are
delivered to the customer’s rack in the sequence in which vehicles come down the assembly line. We have systems
in place that allow us to provide complete customized interior kits in boxes that are delivered in sequence, and we
intend to expand upon these systems such that we will be able to provide, in sequence, fully integrated modular
systems combining the cab body and interior and seating systems.
In many instances, we keep track of our build sequence by vehicle identification number and components are
identified by bar code. Sequencing reduces our cost of production because it eliminates warehousing costs and
reduces waste and obsolescence, offsetting any increased labor costs. Several of our manufacturing facilities are
strategically located near our customers’ assembly plants, which facilitates this process and minimizes shipping
costs.
We employ just-in-time manufacturing and system sourcing in our operations to meet customer requirements
for faster deliveries and to minimize our need to carry significant inventory levels. We utilize material systems to
manage inventory levels and, in certain locations, we have inventory delivered as often as two times per day from a
nearby facility based on the previous day’s order. This eliminates the need to carry excess inventory at our facilities.
Typically, in a strong economy, new vehicle production increases and greater funding is available to be spent
on enhancements to the truck interior. As demand goes up, the mix of our products shifts towards more expensive
systems, such as sleeper units, with enhanced features and higher quality materials. The shift from low-end units to
12
high-end units amplifies the positive effect a strong economy has on our business. Conversely, when economic
conditions and indicators decline and customers shift away from ordering high-end units with enhanced features,
our business is adversely affected from both lower volume and lower pricing. We strive to manage down cycles by
running our facilities at capacity while maintaining the capability and flexibility to expand. We have plans to work
with our employees and rely on their involvement to help minimize problems and re-align our capacity during
fluctuating periods of increased or decreased production levels to achieve on-time delivery.
As a means to enhance our operations, we continue to implement TQPS throughout our operations. TQPS is
our customized version of Lean Manufacturing and consists of a 32 hour interactive class that is taught exclusively
by members of our management team. A significant portion of the labor efficiencies we gained over the past few
years is due to the program. TQPS is an analytical process in which we analyze each of our manufacturing cells and
identify the most efficient process to improve efficiency and quality. The goal is to achieve total cost management
and continuous improvement. Some examples of TQPS-related improvements are: reduced labor to move parts
around the facility, clear walking paths in and around manufacturing cells and increased safety. An ongoing goal is
to reduce the time employees spend waiting for materials within a facility. In an effort to increase operational
efficiency, improve product quality and provide additional capacity, we intend to continue to implement TQPS
improvements at each of our manufacturing facilities.
Raw Materials and Suppliers
A description of the principal raw materials we utilize for each of our principal product categories is set forth
below:
(cid:129) Seats and Seating Systems. The principal raw materials used in our seat systems include steel, aluminum
and foam related products and are generally readily available and obtained from multiple suppliers under
various supply agreements. Leather, vinyl, fabric and certain components are also purchased from multiple
suppliers under supply agreements. Typically, our supply agreements are for a term of at least one year and
are terminable by us for breach or convenience.
(cid:129) Trim Systems and Components. The principal raw materials used in our interior systems processes are resin
and chemical products, foam, vinyl and fabric which are formed and assembled into end products. These raw
materials are obtained from multiple suppliers, typically under supply agreements which are for a term of at
least one year and are terminable by us for breach or convenience.
(cid:129) Mirrors, Wipers and Controls. The principal raw materials used to manufacture our mirrors, wipers and
controls are steel, stainless steel and rubber, which are generally readily available and obtained from
multiple suppliers. We also purchase sub-assembled products such as motors for our wiper systems and
mirrors.
(cid:129) Cab Structures, Sleeper Boxes, Body Panels and Structural Components. The principal raw materials used in
our cab structures, sleeper boxes, body panels and structural components are steel and aluminum, the
majority of which we purchase in sheets and stamp at our Shadyside, Ohio facility. These raw materials are
generally readily available and obtained from several suppliers, typically under purchase contracts which fix
price and supply for up to one year.
(cid:129) Electronic Wire Harnesses and Panel Assemblies. The principal raw materials used to manufacture our
electronic wire harnesses are wire, connectors, terminals, switches, relays and braid fabric. These raw
materials are obtained from multiple suppliers and are generally readily available.
Our supply agreements generally provide for fixed pricing but do not require us to purchase any specified
quantities. We have not experienced any significant shortages of raw materials and normally do not carry
inventories of raw materials or finished products in excess of those reasonably required to meet production
and shipping schedules as well as service requirements. Steel, aluminum, petroleum-based products, copper, resin,
foam, fabrics, wire and wire components account for the most significant portion of our raw material costs. We
typically purchase steel, copper and petroleum-based products at market prices, which over the last several years,
have increased significantly. As a result, we are currently being assessed surcharges and price increases on certain of
our purchases of steel, copper and petroleum-related products. We continue to work with our customers and
13
suppliers to minimize the impact of such surcharges while working diligently to minimize the impacts of such
increases. Certain component purchases and suppliers are directed by our customers. We do not believe we are
dependent on a single supplier or limited group of suppliers for our raw materials.
Customers and Marketing
We sell our products principally to the commercial vehicle OEM truck market. Approximately 41% of our
2007 revenues and approximately 60% of our 2006 revenues were derived from sales to commercial vehicle truck
OEMs, with the remainder of our revenues being generated principally from sales to the construction, aftermarket
and OEM service markets.
We supply our products primarily to the heavy truck OEM market, construction market, the aftermarket and
OEM service segment and other commercial vehicle and specialty markets. The following is a summary of our
revenues by end-user market for the three years ended December 31:
Heavy Truck OEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aftermarket and OEM Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Military . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Agriculture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2007
2006
2005
41% 60% 62%
18
26
10
13
3
6
2
3
1
1
6
10
15
9
2
2
1
9
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100% 100% 100%
The change in revenues by end market in 2007 is primarily related to the decreased demand in the North
American (Class 8) heavy truck market.
Our principal customers in North America include PACCAR, International, Caterpillar, Freightliner and
Volvo/ Mack. We believe we are an important long-term supplier to all leading truck manufacturers in North
America because of our comprehensive product offerings, leading brand names and product innovation. In our
European, China and Australian operations, our principal customers in the commercial vehicle market include
Caterpillar, Volvo/Mack, Komatsu, Hitachi, CNH Global (Case New Holland) and JCB Limited.
The following is a summary of our significant revenues by OEM customer for the three years ended December 31:
PACCAR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caterpillar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freightliner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Volvo/Mack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oshkosh Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Komatsu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deere & Co. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2007
2006
2005
14% 17% 17%
22
11
8
11
13
11
13
11
2
4
2
3
2
3
21
32
19
7
16
14
2
2
2
21
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100% 100% 100%
Except as set forth in the above table, no other customer accounted for more than 10% of our revenues for the
three years ended December 31, 2007. The change in revenues by significant OEM customers in 2007 is primarily
related to the decreased demand in the North American (Class 8) heavy truck market.
14
Our European, China, Australian and Mexican operations collectively contributed approximately 23%, 13%
and 16% of our revenues for the years ended December 31, 2007, 2006 and 2005, respectively. The change in
revenue by geographic location in 2007 is primarily related to the decreased demand in the North American
(Class 8) heavy truck market as well as the impact of the CIEB and PEKM acquisitions.
Our OEM customers generally source business to us pursuant to written contracts, purchase orders or other
firm commitments in terms of price, quality, technology and delivery. Awarded business generally covers the supply
of all or a portion of a customer’s production and service requirements for a particular product program rather than
the supply of a specific quantity of products. In general, these contracts, purchase orders and commitments provide
that the customer can terminate the contract, purchase order or commitment if we do not meet specified quality,
delivery and cost requirements. Such contracts, purchase orders or other firm commitments generally extend for the
entire life of a platform, which is typically five to seven years. Although these contracts, purchase orders or other
commitments may be terminated at any time by our customers (but not by us), such terminations have been minimal
and have not had a material impact on our results of operations. In order to reduce our reliance on any one vehicle
model, we produce products for a broad cross-section of both new and more established models.
Our contracts with our major OEM customers generally provide for an annual productivity cost reduction.
These reductions are calculated on an annual basis as a percentage of the previous year’s purchases by each
customer. The reduction is achieved through engineering changes, material cost reductions, logistics savings,
reductions in packaging cost and labor efficiencies. Historically, most of these cost reductions have been offset by
both internal reductions and through the assistance of our supply base, although no assurances can be given that we
will be able to achieve such reductions in the future. If the annual reduction targets are not achieved, the difference is
recovered through price reductions. Our cost structure is comprised of a high percentage of variable costs that
provides us with additional flexibility during economic cycles.
Our sales and marketing efforts with respect to our OEM sales are designed to create overall awareness of our
engineering, design and manufacturing capabilities and to enable us to be selected to supply products for new and
redesigned models by our OEM customers. Our sales and marketing staff works closely with our design and
engineering personnel to prepare the materials used for bidding on new business as well as to provide a consistent
interface between us and our key customers. We currently have sales and marketing personnel located in every
major region in which we operate. From time to time, we also participate in industry trade shows and advertise in
industry publications. One of our ongoing initiatives is to negotiate and enter into long term supply agreements with
our existing customers that allow us to leverage all of our business and provide a complete cab system to our
commercial vehicle OEM customers.
Our principal customers for our aftermarket sales include OEM dealers and independent wholesale distrib-
utors. Our sales and marketing efforts for our aftermarket sales are focused on support of these two distribution
chains, as well as direct contact with all major fleets.
Backlog
We do not generally obtain long-term, firm purchase orders from our customers. Rather, our customers
typically place annual blanket purchase orders, but these orders do not obligate them to purchase any specific or
minimum amount of products from us until a release is issued by the customer under the blanket purchase order.
Releases are typically placed within 30 to 90 days of required delivery and may be canceled at any time, in which
case the customer would be liable for work in process and finished goods. We do not believe that our backlog of
expected product sales covered by firm purchase orders is a meaningful indicator of future sales since orders may be
rescheduled or canceled.
Competition
Within each of our principal product categories, we compete with a variety of independent suppliers and with
OEMs’ in-house operations, primarily on the basis of price, breadth of product offerings, product quality, technical
expertise, development capability, product delivery and product service. We believe we are the only supplier in the
North American commercial vehicle market that can offer complete cab systems in sequence integrating interior
15
systems (including seats, interior trim and flooring systems), mirrors and wire harnesses with the cab structure. A
summary of our estimated market position and primary independent competitors is set forth below:
(cid:129) Seats and Seating Systems. We believe that we have the number one market position in North America
supplying seats and seating systems to the commercial vehicle heavy-truck market. We also believe that we
have the number one market position in supplying seats and seating systems to commercial vehicles used in
the medium/heavy construction equipment industry on a worldwide basis. Our primary independent
competitors in the North American commercial vehicle market include Sears Manufacturing Company,
Accuride Corporation, Grammer AG and Seats, Inc., and our primary competitors in the European
commercial vehicle market include Grammer AG and Isringhausen.
(cid:129) Trim Systems and Components. We believe that we have the number one market position in the North
American commercial vehicle heavy-truck market with respect to our soft interior trim products and a
leading presence in the hard interior trim market. We face competition from a number of different
competitors with respect to each of our trim system products and components. Overall, our primary
independent competitors are ConMet, Fabriform, TPI, Findlay, Superior, Trim Masters, Inc., Blachford Ltd.
and Mitras.
(cid:129) Mirrors, Wipers and Controls. We believe that we are a leading supplier in the North American com-
mercial vehicle heavy-truck market with respect to our windshield wiper systems and mirrors. We face
competition from a number of different competitors with respect to each of our principal products in this
category. Our principal competitors for mirrors are Hadley, Lang-Mekra and Trucklite, and our principal
competitors for windshield wiper systems are Johnson Electric, Trico and Valeo.
(cid:129) Cab Structures, Sleeper Boxes, Body Panels and Structural Components. We believe we are the leading
non-captive supplier in the North American commercial vehicle heavy-truck market with respect to our cab
structural components, cab structures, sleeper boxes and body panels. Our principal competitors are Magna,
Ogihara Corporation, Spartanburg Stamping, Able Body and Defiance Metal Products.
(cid:129) Electronic Wire Harnesses and Panel Assemblies. We believe that we are a leading supplier of low- to
medium-volume complex, electronic wire harnesses and related assemblies used in the global heavy
equipment, commercial vehicle, heavy-truck and specialty and military vehicle markets. Our principal
competitors for electronic wire harnesses include large diversified suppliers such as AFL, Delphi, Leoni,
Nexans, PKC, Stoneridge, Yazaki and smaller independent companies such as Fargo Assembly and
Unlimited Services.
Research and Development, Design and Engineering
Our objective is to be a leader in offering superior quality and technologically advanced products to our
customers at competitive prices. We engage in ongoing engineering and research and development activities to
improve the reliability, performance and cost-effectiveness of our existing products and to design and develop new
products for existing and new applications.
We generally work with our customers’ engineering and development teams at the beginning of the design
process for new components and assemblies, or the redesign process for existing components and assemblies, in
order to maximize production efficiency and quality. These processes may take place from one to three years prior
to the commencement of production. On average, the development time for a new component takes between 12 and
24 months during the design phase, while the re-engineering of an existing part may take between one and six
months. Early design involvement can result in a product that meets or exceeds the customer’s design and
performance requirements and is more efficient to manufacture. In addition, our extensive involvement enhances
our position for bidding on such business. We work aggressively to ensure that our quality and delivery metrics
distinguish us from our competitors.
We focus on bringing our customers integrated products that have superior content, comfort and safety.
Consistent with our value-added engineering focus, we place a large emphasis on the relationships with the
engineering departments of our customers. These relationships not only help us to identify new business
16
opportunities but also enable us to compete based on the quality of our products and services, rather than exclusively
on price.
We are currently involved in the design stage of several products for our customers and expect to begin
production of these products in the years 2008 to 2012.
Intellectual Property
We consider ourselves to be a leader in both product and process technology, and, therefore, protection of
intellectual property is important to our business. Our principal intellectual property consists of product and process
technology, a limited number of United States and foreign patents, trade secrets, trademarks and copyrights.
Although our intellectual property is important to our business operations and in the aggregate constitutes a valuable
asset, we do not believe that any single patent, trade secret, trademark or copyright, or group of patents, trade
secrets, trademarks or copyrights is critical to the success of our business. Our policy is to seek statutory protection
for all significant intellectual property embodied in patents, trademarks and copyrights. From time to time, we grant
licenses under our patents and technology and receive licenses under patents and technology of others.
We market our products under brand names that include KAB Seating, National Seating, Trim Systems and
Sprague Controls, Sprague Devices», PrutsmanTM, Moto Mirror», RoadWatch», and Mayflower». We believe that
our brands are valuable and are increasing in value with the growth of our business, but that our business is not
dependent on such brands. We own U.S. federal trademark registrations for several of our brands.
Seasonality
OEMs’ production requirements can fluctuate as the demand for new vehicles soften during the holiday
seasons in North America, Europe and Asia as OEM manufacturers generally close their production facilities at
various times during the year.
Employees
As of December 31, 2007, we had approximately 6,410 permanent employees, of which approximately 18%
were salaried and the remainder were hourly. Approximately 43% of the employees in our North American
operations were unionized, and approximately 48% of our employees at our Europe and Asia operations were
represented by shop steward committees. We have not experienced any material strikes, lockouts or work stoppages
during 2007 and consider our relationship with our employees to be satisfactory. On an as needed basis during peak
periods, contract and temporary employees are utilized.
Available Information
We maintain a website on the Internet at www.cvgrp.com. We make available free of charge through our
website, by way of a hyperlink to a third-party Securities Exchange Commission (SEC) filing website, our Annual
Reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those
reports electronically filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act of 1934. Such
information is available as soon as such reports are filed with the SEC. Additionally, our Code of Ethics may be
accessed within the Investor Relations section of our website. Information found on our website is not part of this
Annual Report on Form 10-K or any other report filed with the SEC.
Item 1A. Risk Factors
You should carefully consider the risks described below before making an investment decision. The risks and
uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known
to us or that we currently deem immaterial may also impair our business operations.
17
If any of these certain risks and uncertainties were to actually occur, our business, financial condition or results
of operations could be materially adversely affected. In such case, the trading price of our common stock could
decline and you may lose all or part of your investment. These risks and uncertainties include, but are not limited to,
the following:
(cid:129) Volatility and cyclicality in the commercial vehicle market could adversely affect us.
Our profitability depends in part on the varying conditions in the commercial vehicle market. This market is
subject to considerable volatility as it moves in response to cycles in the overall business environment and is
particularly sensitive to the industrial sector, which generates a significant portion of the freight tonnage hauled.
Sales of commercial vehicles have historically been cyclical, with demand affected by such economic factors as
industrial production, construction levels, demand for consumer durable goods, interest rates and fuel costs. For
example, North American commercial vehicle sales and production experienced a downturn from 2000 to 2003 due
to a confluence of events that included a weak economy, an oversupply of new and used vehicle inventory and lower
spending on commercial vehicles and equipment. In addition, North American commercial vehicle sales and
production experienced a downturn during 2007 as a result of pre-orders in 2006 and general weakness in the North
American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North
America, among other factors. These downturns had a material adverse effect on our business during the same
periods. We cannot provide any assurance as to the length or ultimate level of the recovery of this decline. We expect
that unit production of class 8 heavy trucks will not materially recover from 2007 levels in 2008. Nor can we predict
that the industry will follow past cyclical patterns that might include a strong 2009 pre-order in advance of new
emissions standards set to take place in 2010.
(cid:129) Our profitability could be adversely affected if the actual production volumes for our customers’ vehicles
are significantly lower than expected.
We incur costs and make capital expenditures based upon estimates of production volumes for our customers’
vehicles. While we attempt to establish a price for our components and systems that will compensate for variances
in production volumes, if the actual production of these vehicles is significantly less than anticipated, our gross
margin on these products would be adversely affected. We enter into agreements with our customers at the
beginning of a given platform’s life to supply products for that platform. Once we enter into such agreements,
fulfillment of our purchasing requirements is our obligation for the entire production life of the platform, with terms
ranging from five to seven years, and we have no provisions to terminate such contracts. We may become committed
to supply products to our customers at selling prices that are not sufficient to cover the direct cost to produce such
products. We cannot predict our customers’ demands for our products either in the aggregate or for particular
reporting periods. If customers representing a significant amount of our revenues were to purchase materially lower
volumes than expected, it would have a material adverse effect on our business, financial condition and results of
operations.
(cid:129) Our major OEM customers may exert significant influence over us.
The commercial vehicle component supply industry has traditionally been highly fragmented and serves a
limited number of large OEMs. As a result, OEMs have historically had a significant amount of leverage over their
outside suppliers. Our contracts with major OEM customers generally provide for an annual productivity cost
reduction. Historically, cost reductions through product design changes, increased productivity and similar
programs with our suppliers have generally offset these customer-imposed productivity cost reduction require-
ments. However, if we are unable to generate sufficient production cost savings in the future to offset price
reductions, our gross margin and profitability would be adversely affected. In addition, changes in OEMs’
purchasing policies or payment practices could have an adverse effect on our business.
(cid:129) We may be unable to successfully implement our business strategy and, as a result, our businesses and
financial position and results of operations could be materially and adversely affected.
Our ability to achieve our business and financial objectives is subject to a variety of factors, many of which are
beyond our control. For example, we may not be successful in implementing our strategy if unforeseen factors
18
emerge that diminish the expected growth in the commercial vehicle markets we supply, or we experience increased
pressure on our margins. In addition, we may not succeed in integrating strategic acquisitions and our pursuit of
additional strategic acquisitions may lead to resource constraints which could have a negative impact on our ability
to meet customers’ demands, thereby adversely affecting our relationships with those customers. As a result of such
business or competitive factors, we may decide to alter or discontinue aspects of our business strategy and may
adopt alternative or additional strategies. Any failure to successfully implement our business strategy could
adversely affect our business, results of operations and growth potential.
Developing product innovations has been and will continue to be a significant part of our business strategy. We
believe that it is important that we continue to meet our customers’ demands for product innovation, improvement
and enhancement, including the continued development of new-generation products, design improvements and
innovations that improve the quality and efficiency of our products. However, such development will require us to
continue to invest in research and development and sales and marketing. In the future, we may not have sufficient
resources to make such necessary investments, or we may be unable to make the technological advances necessary
to carry out product innovations sufficient to meet our customers’ demands. We are also subject to the risks
generally associated with product development, including lack of market acceptance, delays in product develop-
ment and failure of products to operate properly. We may, as a result of these factors, be unable to meaningfully
focus on product innovation as a strategy and may therefore be unable to meet our customers’ demands for product
innovation.
(cid:129) If we are unable to obtain raw materials at favorable prices, it could adversely impact our results of
operations and financial condition.
Numerous raw materials are used in the manufacture of our products. Steel, aluminum, petroleum-based
products, copper, resin, foam, fabrics, wire and wire components account for the most significant portion of our raw
material costs. Although we currently maintain alternative sources for raw materials, our business is subject to the
risk of price increases and periodic delays in delivery. For example, we are currently being assessed surcharges as
well as price increases on certain purchases of steel, copper and other raw materials. If we are unable to purchase
certain raw materials required for our operations for a significant period of time, our operations would be disrupted,
and our results of operations would be adversely affected. In addition, if we are unable to pass on the increased costs
of raw materials to our customers, this could adversely affect our results of operations and financial condition.
(cid:129) We may be unable to complete additional strategic acquisitions or we may encounter unforeseen difficulties
in integrating acquisitions.
We intend to actively pursue additional acquisition targets that will allow us to continue to expand into new
geographic markets, add new customers, provide new product, manufacturing and service capabilities and increase
penetration with existing customers. However, we expect to face competition for acquisition candidates, which may
limit the number of our acquisition opportunities and may lead to higher acquisition prices. Moreover, acquisitions
of businesses may require additional debt financing, resulting in additional leverage. The covenants of our senior
credit facility may further limit our ability to complete acquisitions. There can be no assurance that we will find
attractive acquisition candidates or successfully integrate acquired businesses into our existing business. If we fail
to complete additional acquisitions, we may have difficulty competing with more thoroughly integrated competitors
and our results of operations could be adversely affected. To the extent that we do complete additional acquisitions,
if the expected synergies from such acquisitions do not materialize or we fail to successfully integrate such new
businesses into our existing businesses, our results of operations could also be adversely affected.
(cid:129) We may be adversely impacted by labor strikes, work stoppages and other matters.
The hourly workforces at our Norwalk and Shadyside, Ohio facilities and Mexico operations are unionized.
The unionized employees at these facilities represented approximately 43% of our employees in our North
American operations as of December 31, 2007. We have experienced limited unionization efforts at certain of our
other North American facilities from time to time. In addition, 48% of our employees at our Europe and Asia
operations are represented by a shop steward committee, which may seek to limit our flexibility in our relationship
19
with these employees. We cannot assure you that we will not encounter future unionization efforts or other types of
conflicts with labor unions or our employees.
Many of our OEM customers and their suppliers also have unionized work forces. Work stoppages or slow-
downs experienced by OEMs or their other suppliers could result in slow-downs or closures of assembly plants
where our products are included in assembled commercial vehicles. In the event that one or more of our customers
or their suppliers experience a material work stoppage, such work stoppage could have a material adverse effect on
our business.
(cid:129) Our businesses are subject to statutory environmental and safety regulations in multiple jurisdictions, and
the impact of any changes in regulation and/or the violation of any applicable laws and regulations by our
businesses could result in a material and adverse affect on our financial condition and results of operations.
We are subject to foreign, federal, state, and local laws and regulations governing the protection of the
environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, the
generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of
hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to
obtain permits from governmental authorities for certain of our operations. We cannot assure you that we are, or
have been, in complete compliance with such environment and safety laws, regulations and permits. If we violate or
fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. In
some instances, such a fine or sanction could have a material adverse effect on us. The environmental laws to which
we are subject have become more stringent over time, and we could incur material expenses in the future to comply
with environmental laws. We are also subject to laws imposing liability for the cleanup of contaminated property.
Under these laws, we could be held liable for costs and damages relating to contamination at our past or present
facilities and at third party sites to which we sent waste containing hazardous substances. The amount of such
liability could be material.
Several of our facilities are either certified as, or are in the process of being certified as ISO 9001, 14000, 14001
or TS16949 (the international environmental management standard) compliant or are developing similar envi-
ronmental management systems. Although we have made, and will continue to make, capital expenditures to
implement such environmental programs and comply with environmental requirements, we do not expect to make
material capital expenditures for environmental controls in 2008. The environmental laws to which we are subject
have become more stringent over time, however, and we could incur material costs or expenses in the future to
comply with environmental laws.
Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes
occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our
current or former operations were taken, or if contamination is discovered at any of our current or former properties,
we may be held liable for the costs of cleanup and for any other response by governmental authorities or private
parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise
whether or not we had complied with environmental laws governing the handling of hazardous substances or
wastes.
(cid:129) We may be adversely affected by the impact of government regulations on our OEM customers.
Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant
government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to
commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the
Environmental Protection Agency (“EPA”), state regulatory agencies, such as the California Air Resources Board
(“CARB”), and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the
National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by the
National Highway Traffic Safety Administration. Changes in emission standards and other proposed governmental
regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For
example, new emission standards governing Heavy-duty (Class 8) diesel engines that went into effect in the United
States on October 1, 2002 and January 1, 2007 resulted in significant purchases of new trucks by fleet operators
20
prior to such date and reduced short term demand for such trucks in periods immediately following such date. New
emission standards for truck engines used in Class 5 to 8 trucks imposed by the EPA and CARB are scheduled to
become effective in 2010. To the extent that current or future governmental regulation has a negative impact on the
demand for commercial vehicles, our business, financial condition or results of operations could be adversely
affected.
(cid:129) Our customer base is concentrated and the loss of business from a major customer or the discontinuation of
particular commercial vehicle platforms could reduce our revenues.
Sales to PACCAR, International, Caterpillar, Freightliner and Volvo/Mack accounted for approximately 14%,
11%, 11%, 11% and 11%, respectively, of our revenue in 2007, and our ten largest customers accounted for
approximately 71% of our revenue in 2007. The loss of any of our largest customers or the loss of significant
business from any of these customers could have a material adverse effect on our business, financial condition and
results of operations. Even though we may be selected as the supplier of a product by an OEM for a particular
vehicle, our OEM customers issue blanket purchase orders which generally provide for the supply of that
customer’s annual requirements for that vehicle, rather than for a specific number of our products. If the OEM’s
requirements are less than estimated, the number of products we sell to that OEM will be accordingly reduced. In
addition, the OEM may terminate its purchase orders with us at any time.
(cid:129) Currency exchange rate fluctuations could have an adverse effect on our revenues and results of
operations.
We have operations in Europe, China, Australia and Mexico, which accounted for approximately 23% of our
revenues in 2007. As a result, we generate a significant portion of our sales and incur a significant portion of our
expenses in currencies other than the U.S. dollar. To the extent that we are unable to match revenues received in
foreign currencies with costs paid in the same currency, exchange rate fluctuations in any such currency could have
an adverse effect on our financial results.
(cid:129) We are subject to certain risks associated with our foreign operations.
We have operations in Europe, China, Australia and Mexico, which accounted for approximately 23%, 13%
and 16% of our total revenues for the years ended December 31, 2007, 2006 and 2005, respectively. There are
certain risks inherent in our international business activities including, but not limited to:
(cid:129) the difficulty of enforcing agreements and collecting receivables through certain foreign legal systems;
(cid:129) foreign customers, who may have longer payment cycles than customers in the United States;
(cid:129) tax rates in certain foreign countries, which may exceed those in the United States and foreign earnings may
be subject to withholding requirements or the imposition of tariffs, exchange controls or other restrictions,
including restrictions on repatriation;
(cid:129) intellectual property protection difficulties;
(cid:129) general economic and political conditions in countries where we operate, which may have an adverse effect
on our operations in those countries;
(cid:129) the difficulties associated with managing a large organization spread throughout various countries; and
(cid:129) complications in complying with a variety of foreign laws and regulations, which may conflict with United
States law.
As we continue to expand our business globally, our success will be dependent, in part, on our ability to
anticipate and effectively manage these and other risks associated with foreign operations. We cannot assure you
that these and other factors will not have a material adverse effect on our international operations or our business,
financial condition or results of operations as a whole.
21
(cid:129) Our inability to compete effectively in the highly competitive commercial vehicle component supply
industry could result in lower prices for our products, reduced gross margins and loss of market share,
which could have an adverse effect on our revenues and operating results.
The commercial vehicle component supply industry is highly competitive. Our products primarily compete on
the basis of price, breadth of product offerings, product quality, technical expertise and development capability,
product delivery and product service. Increased competition may lead to price reductions resulting in reduced gross
margins and loss of market share.
Current and future competitors may make strategic acquisitions or establish cooperative relationships among
themselves or with others, foresee the course of market development more accurately than we do, develop products
that are superior to our products, produce similar products at lower cost than we can or adapt more quickly to new
technologies, industry or customer requirements. By doing so, they may enhance their ability to meet the needs of
our customers or potential future customers. These developments could limit our ability to obtain revenues from
new customers and to maintain existing revenues from our customer base. We may not be able to compete
successfully against current and future competitors and the failure to do so may have a material adverse effect on our
business, operating results and financial condition.
(cid:129) Our products may be rendered less attractive by changes in competitive technologies.
Changes in competitive technologies may render certain of our products less attractive. Our ability to
anticipate changes in technology and to successfully develop and introduce new and enhanced products on a timely
basis will be a significant factor in our ability to remain competitive. There can be no assurance that we will be able
to achieve the technological advances that may be necessary for us to remain competitive. We are also subject to the
risks generally associated with new product introductions and applications, including lack of market acceptance,
delays in product development and failure to operate properly.
(cid:129) If we are unable to recruit or retain skilled personnel, or if we lose the services of any of our key
management personnel, our business, operating results and financial condition could be materially
adversely affected.
Our future success depends on our continuing ability to attract, train, integrate and retain highly skilled
personnel. Competition for these employees is intense. We may not be able to retain our current key employees or
attract, train, integrate or retain other highly skilled personnel in the future. Our future success also depends in large
part on the continued service of key management personnel, particularly our key executive officers. If we lose the
services of one or more of these individuals or other key personnel, or if we are unable to attract, train, integrate and
retain the highly skilled personnel we need, our business, operating results and financial condition could be
materially adversely affected.
(cid:129) We have only limited protection for our proprietary rights in our intellectual property, which makes it
difficult to prevent third parties from infringing upon our rights.
Our success depends to a certain degree on our ability to protect our intellectual property and to operate
without infringing on the proprietary rights of third parties. While we have been issued patents and have registered
trademarks with respect to many of our products, our competitors could independently develop similar or superior
products or technologies, duplicate our designs, trademarks, processes or other intellectual property or design
around any processes or designs on which we have or may obtain patents or trademark protection. In addition, it is
possible that third parties may have or acquire licenses for other technology or designs that we may use or desire to
use, so that we may need to acquire licenses to, or to contest the validity of, such patents or trademarks of third
parties. Such licenses may not be made available to us on acceptable terms, if at all, and we may not prevail in
contesting the validity of third party rights.
In addition to patent and trademark protection, we also protect trade secrets, know-how and other confidential
information against unauthorized use by others or disclosure by persons who have access to them, such as our
employees, through contractual arrangements. These arrangements may not provide meaningful protection for our
trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or
22
disclosure of such trade secrets, know-how or other proprietary information. If we are unable to maintain the
proprietary nature of our technologies, our revenues could be materially adversely affected.
(cid:129) Our products may be susceptible to claims by third parties that our products infringe upon their
proprietary rights.
As the number of products in our target markets increases and the functionality of these products further
overlaps, we may become increasingly subject to claims by a third party that our technology infringes such party’s
proprietary rights. Regardless of their merit, any such claims could be time consuming and expensive to defend,
may divert management’s attention and resources, could cause product shipment delays and could require us to
enter into costly royalty or licensing agreements. If successful, a claim of infringement against us and our inability
to license the infringed or similar technology and/or product could have a material adverse effect on our business,
operating results and financial condition.
(cid:129) The market price of our common stock may be extremely volatile.
Our stock price has fluctuated since our initial public offering in August 2004. The trading price of our
common stock is subject to significant fluctuations in response to variations in quarterly operating results, including
foreign currency exchange fluctuations, the gain or loss of significant orders, changes in earnings estimates by
analysts, announcements of technological innovations or new products by us or our competitors, general conditions
in the commercial vehicle industry and other events or factors. In addition, the equity markets in general have
experienced extreme price and volume fluctuations which have affected the market price for many companies in
industries similar or related to that of ours and which have been unrelated to the operating performance of these
companies. These market fluctuations may have affected and may continue to affect the market price of our
common stock.
(cid:129) Our operating results, revenues and expenses may fluctuate significantly from quarter-to-quarter or year-
to-year, which could have an adverse effect on the market price of our stock.
For a number of reasons, including but not limited to, those described below, our operating results, revenues
and expenses have in the past varied and may in the future vary significantly from quarter-to-quarter or year-to-year.
These fluctuations could have an adverse effect on the market price of our common stock.
Fluctuations in Quarterly or Annual Operating Results. Our operating results may fluctuate as a result of:
(cid:129) the size, timing, volume and execution of significant orders and shipments;
(cid:129) changes in the terms of our sales contracts;
(cid:129) the timing of new product announcements;
(cid:129) changes in our pricing policies or those of our competitors;
(cid:129) market acceptance of new and enhanced products;
(cid:129) the length of our sales cycles;
(cid:129) changes in our operating expenses;
(cid:129) personnel changes;
(cid:129) new business acquisitions;
(cid:129) changes in foreign currency exchange rates; and
(cid:129) seasonal factors.
Limited Ability to Adjust Expenses. We base our operating expense budgets primarily on expected revenue
trends. Certain of our expenses are relatively fixed and as such we may be unable to adjust expenses quickly enough
to offset any unexpected revenue shortfall. Accordingly, any shortfall in revenue may cause significant variation in
operating results in any quarter or year.
23
Based on the above factors, we believe that quarter-to-quarter or year-to-year comparisons of our operating
results may not be a good indication of our future performance. It is possible that in one or more future quarters or
years, our operating results may be below the expectations of public market analysts and investors. In that event, the
trading price of our common stock may be adversely affected.
(cid:129) We may be subject to product liability claims, recalls or warranty claims, which could be expensive,
damage our reputation and result in a diversion of management resources.
As a supplier of products and systems to commercial vehicle OEMs, we face an inherent business risk of
exposure to product liability claims in the event that our products, or the equipment into which our products are
incorporated, malfunction and result in personal injury or death. Product liability claims could result in significant
losses as a result of expenses incurred in defending claims or the award of damages.
In addition, we may be required to participate in recalls involving systems or components sold by us if any
prove to be defective, or we may voluntarily initiate a recall or make payments related to such claims as a result of
various industry or business practices or the need to maintain good customer relationships. Such a recall would
result in a diversion of management resources. While we do maintain product liability insurance, we cannot assure
you that it will be sufficient to cover all product liability claims, that such claims will not exceed our insurance
coverage limits or that such insurance will continue to be available on commercially reasonable terms, if at all. Any
product liability claim brought against us could have a material adverse effect on our results of operations.
Moreover, we warrant the workmanship and materials of many of our products under limited warranties and
have entered into warranty agreements with certain OEMs that warranty certain of our products in the hands of these
OEMs’ customers, in some cases for as long as six years. Accordingly, we are subject to risk of warranty claims in
the event that our products do not conform to our customers’ specifications or, in some cases in the event that our
products do not conform with their customers’ expectations. It is possible for warranty claims to result in costly
product recalls, significant repair costs and damage to our reputation, all of which would adversely affect our results
of operations.
(cid:129) Equipment failures, delays in deliveries or catastrophic loss at any of our facilities could lead to production
or service curtailments or shutdowns.
We manufacture or assemble our products at facilities in North America, Europe, China and Australia. An
interruption in production or service capabilities at any of these facilities as a result of equipment failure or other
reasons could result in our inability to produce our products, which could reduce our net revenues and earnings for
the affected period. In the event of a stoppage in production at any of our facilities, even if only temporary, or if we
experience delays as a result of events that are beyond our control, delivery times to our customers could be severely
affected. Any significant delay in deliveries to our customers could lead to increased returns or cancellations and
cause us to lose future revenues. Our facilities are also subject to the risk of catastrophic loss due to unanticipated
events such as fires, explosions or violent weather conditions. We may experience plant shutdowns or periods of
reduced production as a result of equipment failure, delays in deliveries or catastrophic loss, which could have a
material adverse effect on our business, results of operations or financial condition.
(cid:129) Our indebtedness could adversely affect our financial condition and make it more difficult to implement
our business strategy.
The aggregate amount of our outstanding indebtedness was $159.7 million as of December 31, 2007. Our
substantial level of indebtedness increases the possibility that we may be unable to generate cash sufficient to pay,
when due, the principal of, interest on or other amounts due in respect of our indebtedness, including the notes. Our
substantial indebtedness, combined with our lease and other financial obligations and contractual commitments
could have other important consequences to you as a shareholder. For example, it could:
(cid:129) make it more difficult for us to satisfy our obligations with respect to our indebtedness, including the notes,
and any failure to comply with the obligations of any of our debt instruments, including financial and other
restrictive covenants, could result in an event of default under the indenture governing the notes and the
agreements governing such other indebtedness;
24
(cid:129) make us more vulnerable to adverse changes in general economic, industry and competitive conditions and
adverse changes in government regulation;
(cid:129) require us to dedicate a substantial portion of our cash flow from operations to payments on our indebt-
edness, thereby reducing the availability of our cash flows to fund working capital, capital expenditures,
acquisitions and other general corporate purposes;
(cid:129) limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we
operate;
(cid:129) place us at a competitive disadvantage compared to our competitors that have less debt; and
(cid:129) limit our ability to borrow additional amounts for working capital, capital expenditures, acquisitions, debt
service requirements, execution of our business strategy or other purposes.
Any of the above listed factors could materially adversely affect our business, financial condition and results of
operations.
(cid:129) The terms of our senior credit facility and the indenture governing the 8.0% senior notes due 2013 may
restrict our current and future operations, particularly our ability to respond to changes in our business or
to take certain actions.
Our senior credit facility and the indenture governing the 8.0% senior notes due 2013 contain covenants that,
among other things, restricts our ability to:
(cid:129) incur liens;
(cid:129) incur or assume additional debt or guarantees or issue preferred stock;
(cid:129) pay dividends, or make redemptions and repurchases, with respect to capital stock;
(cid:129) prepay, or make redemptions and repurchases of, subordinated debt;
(cid:129) make loans and investments;
(cid:129) make capital expenditures;
(cid:129) engage in mergers, acquisitions, asset sales, sale/leaseback transactions and transactions with affiliates;
(cid:129) change the business conducted by us or our subsidiaries; and
(cid:129) amend the terms of subordinated debt.
Also, our senior credit facility requires us to maintain compliance with specified financial ratios and satisfy
certain financial condition tests (some of which become more restrictive over time). If we do not comply with such
covenants or satisfy such ratios, our lenders could declare an event of default under the senior credit facility, and our
indebtedness could be declared immediately due and payable. Our ability to comply with the provisions of the
senior credit facility may be affected by changes in economic or business conditions beyond our control. In addition,
these covenants could affect our ability to operate our business and may limit our ability to take advantage of
potential business opportunities as they arise.
(cid:129) Our inability to successfully execute any planned cost reductions, restructuring initiatives or the
achievement of operational efficiencies could result in the incurrence of additional costs and expenses
that could adversely affect our reported earnings.
As part of our business strategy, we continuously seek ways to lower costs, improve manufacturing efficiencies
and increase productivity and intend to apply this strategy to those operations acquired through acquisitions. We
may be unsuccessful in achieving these objectives which could adversely affect our operating results and financial
condition. In addition, we may incur restructuring charges in the future and such charges could adversely affect our
operating results and financial condition.
25
(cid:129) Our earnings may be adversely affected by changes to the carrying values of our tangible and intangible
assets, including goodwill, as a result of recording any impairment charges deemed necessary in con-
junction with the execution of our periodic asset impairment assessment and testing policy.
At December 31, 2007, we had goodwill of approximately $151.2 million and other intangible assets of
approximately $97.6 million. We may identify additional anticipated or unanticipated impairments in any of our
tangible or intangible asset categories in future testing periods and be required to record charges against earnings in
the period in which the impairment is identified. Specific indicators that give rise to asset impairment may include,
but are not limited to, changes in the general economic environment, changes or downturns in our industry as a
whole, termination of any of our customer contracts, restructuring efforts and general workforce reductions among
other factors.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Our corporate office is located in New Albany, Ohio. Several of our manufacturing facilities are located near
our OEM customers to reduce our distribution costs, reduce risk of interruptions in our delivery schedule, further
improve customer service and provide our customers with reliable delivery of products and services. The following
table provides selected information regarding our principal facilities:
Location
Douglas, Arizona
Monona, Iowa
Edgewood, Iowa
Dekalb, Illinois
Michigan City, Indiana
Primary Product/Function
Warehouse Facility
Wire Harness Assembly
Wire Harness Assembly
Cab Assembly
Wipers, Switches
Wixom, Michigan
Kings Mountain, North Carolina
Engineering
Cab, Sleeper Box, Assembly
Statesville, North Carolina
Interior Trim, Seats
(2 facilities)
Approximate
Square Footage
20,000 sq. ft.
62,000 sq. ft.
36,000 sq. ft.
60,000 sq. ft.
87,000 sq. ft.
7,000 sq. ft.
180,000 sq. ft.
163,000 sq. ft.
Ownership Interest
Leased
Owned
Leased
Leased
Leased
Leased
Owned
Leased
Concord, North Carolina
Injection Molding
150,000 sq. ft.
Leased
(2 facilities)
Norwalk, Ohio (3 facilities)
Cab, Sleeper Box, Assembly
360,000 sq. ft.
Owned/Leased
Shadyside, Ohio
Chillicothe, Ohio
Bellaire, Ohio
Dublin, Ohio
Stamping of Steel and Aluminum
Structural and Exposed Stamped
Components
Interior Trim
Warehouse Facility
Administration
New Albany, Ohio (2 facilities)
Canby, Oregon
Corporate Headquarters / R&D
Electronics Assembly
Tigard, Oregon
Lake Oswego, Oregon
Vonore, Tennessee (2 facilities)
Interior Trim
RIM Process
Seats, Mirrors
200,000 sq. ft.
Owned
62,000 sq. ft.
41,000 sq. ft.
14,000 sq. ft.
55,000 sq. ft.
4,000 sq. ft.
121,000 sq. ft.
24,000 sq. ft.
245,000 sq. ft.
Owned
Leased
Leased
Leased
Leased
Leased
Leased
Owned/Leased
Tellico Plains, Tennessee
Cut and Sew, Warehouse Facility
148,000 sq. ft.
Leased
(2 facilities)
26
Location
Primary Product/Function
Pikeville, Tennessee
Dublin, Virginia
Seattle, Washington
Vancouver, Washington
(2 facilities)
Cut and Sew
Interior Trim, Seats
RIM Process, Interior Trim, Seats
Interior Trim
Tacoma, Washington
Agua Prieta, Mexico (2 facilities) Wire Harness Assembly
Injection Molding
Northampton, United Kingdom
Seat Assembly
Seneffs (Brussels), Belgium
Brisbane, Australia
Shanghai, China (2 facilities)
Brandys nad Orlici, Czech
Republic
Seat Assembly
Seat Assembly
Seat Assembly
Seat Assembly
Approximate
Square Footage
15,000 sq. ft.
79,000 sq. ft.
156,000 sq. ft.
63,000 sq. ft.
25,000 sq. ft.
205,000 sq. ft.
210,000 sq. ft.
35,000 sq. ft.
50,000 sq. ft.
76,500 sq. ft.
52,000 sq. ft.
Ownership Interest
Leased
Owned
Owned
Leased
Leased
Leased
Leased
Leased
Leased
Leased
Owned
Liberec, Czech Republic
Wire Harness Assembly
155,000 sq. ft.
Leased
(2 facilities)
Kamyanets-Podilsky, Ukraine
Wire Harness Assembly
46,000 sq. ft.
Leased
We also have leased sales and service offices located in the United States, Australia, France and Czech
Republic.
Utilization of our facilities varies with North American, European and Asian commercial vehicle production
and general economic conditions in such regions. All locations are principally used for manufacturing or assembly,
except for our Wixom, Michigan and New Albany and Dublin, Ohio facilities which are administrative offices and
our leased warehouse facilities in Douglas, Arizona, Tellico Plains, Tennessee and Bellaire, Ohio. During the fourth
quarter of 2007 and first quarter of 2008, our corporate headquarters, administrative and R&D facilities in Plain
City, Gahanna, Dublin and New Albany, Ohio were consolidated into a single 50,000 square foot leased world
headquarters and an attached 39,000 square foot Research and Development Center in New Albany, Ohio.
Item 3. Legal Proceedings
We are subject to various legal proceedings and claims arising in the ordinary course of business, including, but
not limited to, customer and supplier disputes and product liability claims arising out of the conduct of our
businesses and examinations by the Internal Revenue Service (“IRS”). The IRS routinely examines our federal
income tax returns and, in the course of those examinations, the IRS may propose adjustments to our federal income
tax liability reported on such returns. It is our practice to defend those proposed adjustments that we deem lacking
merit. We are not involved in any litigation at this time in which we expect that an unfavorable outcome of the
proceedings, including any proposed adjustments presented to date by the IRS, individually or collectively, will
have a material adverse effect on our financial position, results of operations or cash flows.
Item 4. Submission of Matters to a Vote of Security Holders
There were no matters submitted to a vote of stockholders during the fourth quarter of 2007.
27
PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of
Equity Securities
Our common stock is traded on the Nasdaq Global Select Market under the symbol “CVGI.” The following
table sets forth the high and low sale prices for our common stock, for the periods indicated as regularly reported by
the Nasdaq Global Select Market:
High
Low
Year Ended December 31, 2007:
Fourth Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.38
Third Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.29
Second Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.03
First Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.24
Year Ended December 31, 2006:
Fourth Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.57
Third Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.08
Second Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.25
First Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.29
As of February 29, 2008, there were 100 holders of record of our outstanding common stock.
$12.11
$12.71
$17.70
$18.82
$18.47
$17.19
$17.82
$17.10
We have not declared or paid any dividends to the holders of our common stock in the past and do not anticipate
paying dividends in the foreseeable future. Any future payment of dividends is within the discretion of the Board of
Directors and will depend upon, among other factors, the capital requirements, operating results and financial
condition of CVG. In addition, our ability to pay cash dividends is limited under the terms of the credit agreement
governing our senior credit facility.
28
The graph below matches Commercial Vehicle Group, Inc.’s cumulative 40-month total stockholder return on
common stock with the cumulative total returns of the NASDAQ Composite Index and the Commercial Vehicle
Supplier Composite Index. The Commercial Vehicle Supplier Composite Index (NEW) includes five companies:
Accuride Corporation, ArvinMeritor, Inc., Cummins, Inc., Eaton Corp. and Stoneridge, Inc. The Commercial
Vehicle Supplier Composite (NEW) includes Stoneridge, Inc., and excludes Modine Manufacturing Co., because
we believe Stoneridge, Inc. is more comparable to us. We no longer present the Commercial Vehicle Supplier
Composite (OLD) because we believe the Commercial Vehicle Supplier Composite (NEW) includes companies
that are more comparable to us. The graph tracks the performance of a $100 investment in our common stock and in
each index (with the reinvestment of all dividends) from August 5, 2004 to December 31, 2007.
COMPARISON OF 40-MONTH CUMULATIVE TOTAL RETURN*
Among Commercial Vehicle Group, Inc., the NASDAQ Composite Index,
the Commercial Vehicle Supplier Composite Index (OLD)
and the Commercial Vehicle Supplier Composite Index (NEW)
$250
$200
$150
$100
s
r
a
l
l
o
D
$50
$0
Aug. 5, 2004
Dec. 31, 2004
Dec. 31, 2005
Dec. 31, 2006
Dec. 31, 2007
CVGI
NASDAQ
COMMERCIAL (OLD)
COMMERCIAL (NEW)
* $100 invested on 8/5/04 in stock or index-including reinvestment of dividends.
08/05/04
12/31/04
12/31/05
12/31/06
12/31/07
Commercial Vehicle Group, Inc.
$100.00
$166.64
$143.36
$166.41
$110.69
NASDAQ Composite
$100.00
$118.09
$120.94
$134.73
$147.21
Commercial Vehicle Supplier Composite (OLD)
$100.00
$116.42
$111.37
$130.28
$195.74
Commercial Vehicle Supplier Composite (NEW)
$100.00
$116.59
$109.70
$131.37
$201.30
The information in the graph and table above is not “soliciting material,” is not deemed “filed” with the
Securities and Exchange Commission and is not to be incorporated by reference in any of our filings under the
Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or
after the date of this annual report, except to the extent that we specifically incorporate such information by
reference.
29
The following table sets forth information in connection with purchases made by, or on behalf of, us or any
affiliated purchaser, of shares of our common stock during the quarterly period ended December 31, 2007:
(c) Total
Number of
Shares (or
Units)
Purchased as
Part of
Publicly
Announced
Plans or
Programs
(d) Maximum
Number (or
Approximate
Dollar Value) of
Shares (or Units)
that May Yet Be
Purchased Under
the Plans or
Prgrams
(a) Total
Number of
Shares (or Units)
Purchased
(b) Average
Price Paid
per Share (or
Unit)
Month #1
(October 1, 2007 through
October 31, 2007). . . . . . . . . . . . . .
Month #2
(November 1, 2007 through
November 30, 2007) . . . . . . . . . . . .
Month #3
(December 1, 2007 through
December 31, 2007) . . . . . . . . . . . .
22,317
$13.40
—
—
—
—
—
—
—
—
—
—
We did not repurchase any of our common stock on the open market as part of a stock repurchase program
during the fourth quarter of 2007, however, our employees surrendered 22,317 shares of our common stock to
satisfy the tax withholding obligations on the vesting of restricted stock awards issued under our Second Amended
and Restated Equity Incentive Plan.
30
Item 6. Selected Financial Data
The following table sets forth selected consolidated financial data regarding our business and certain industry
information and should be read in conjunction with “Management’s Discussion and Analysis of Financial
Condition and Results of Operations,” and our consolidated financial statements and notes thereto included
elsewhere in this Annual Report on Form 10-K.
Material Events Affecting Financial Statement Comparability:
Collectively, our acquisitions of Mayflower, Monona, Cabarrus and C.I.E.B. materially impacted our results of
operations and as a result, our consolidated financial statements for the years ended December 31, 2007, 2006 and
2005 are not comparable to the results of the prior periods presented without consideration of the information
provided in Note 3 and Note 7 to our consolidated financial statements contained in Item 8 of our Annual Report on
Form 10-K for the year ended December 31, 2006, and Note 3 and Note 7 to our consolidated financial statements
contained in Item 15 of our Annual Report on Form 10-K for the year ended December 31, 2005.
Statement of Operations Data:
Revenues . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cost of revenues . . . . . . . . . . . . . . . . . . . . . . .
Gross profit . . . . . . . . . . . . . . . . . . . . . . . . .
Selling, general and administrative expenses. . .
Share-based compensation expense(1) . . . . . . .
Amortization expense . . . . . . . . . . . . . . . . . . .
Restructuring charges . . . . . . . . . . . . . . . . . . .
Operating income . . . . . . . . . . . . . . . . . . . .
Loss (gain) on foreign currency forward
contracts and other. . . . . . . . . . . . . . . . . . . .
Interest expense. . . . . . . . . . . . . . . . . . . . . . . .
Loss on early extinguishment of debt . . . . . . . .
(Loss) income before income taxes . . . . . . . . .
(Benefit) provision for income taxes . . . . . . . .
2007
Years Ended December 31,
2006
2005
2004
(In thousands, except per share data)
2003
$696,786
620,145
$918,751
768,913
$ 754,481
620,031
$380,445
309,696
$287,579
237,884
76,641
55,493
—
894
1,433
18,821
9,361
14,147
149
(4,836)
(1,585)
149,838
51,950
—
414
—
97,474
(3,468)
14,829
318
85,795
27,745
134,450
44,564
—
358
—
89,528
(3,741)
13,195
1,525
78,549
29,138
70,749
28,985
10,125
107
—
31,532
(1,247)
7,244
1,605
23,930
6,481
49,695
24,281
—
185
—
25,229
3,230
9,796
2,972
9,231
5,267
Net (loss) income . . . . . . . . . . . . . . . . . . . .
$ (3,251)
$ 58,050
$ 49,411
$ 17,449
$
3,964
(Loss) earnings per share:(2)
Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weighted average common shares outstanding:
Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balance Sheet Data (at end of each period):
Working capital (current assets less current
liabilities) . . . . . . . . . . . . . . . . . . . . . . . . . .
Total assets . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total liabilities, excluding debt . . . . . . . . . . . .
Total debt . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total stockholders’ investment . . . . . . . . . . . . .
$
$
(0.15)
(0.15)
$
$
2.74
2.69
$
$
2.54
2.51
$
$
1.13
1.12
$
$
0.29
0.29
21,439
21,439
21,151
21,545
19,440
19,697
15,429
15,623
13,779
13,883
$117,172
$599,089
$174,029
$159,725
$265,335
$135,368
$590,822
$163,803
$162,114
$264,905
$ 119,104
$ 543,883
$ 150,797
$ 191,009
$ 202,077
$ 41,727
$225,638
$ 60,667
$ 53,925
$111,046
$ 28,216
$210,495
$ 48,215
$127,474
$ 34,806
31
Other Data:
Adjusted EBITDA(3). . . . . . . . . . . . . . . . . . . .
Net cash provided by (used in):
Operating activities . . . . . . . . . . . . . . . . . . .
Investing activities . . . . . . . . . . . . . . . . . . . .
Financing activities . . . . . . . . . . . . . . . . . . .
Depreciation and amortization . . . . . . . . . . . . .
Capital expenditures, net . . . . . . . . . . . . . . . . .
North American Heavy-duty (Class 8) truck
2007
Years Ended December 31,
2006
2005
2004
(In thousands, except per share data)
2003
$ 27,296
$115,910
$ 105,385
$ 40,389
$ 30,105
$ 47,575
$ (53,292)
$ (2,394)
$ 16,425
$ 17,274
$ 36,922
$ (27,625)
$ (27,952)
$ 14,983
$ 22,389
$ 44,156
$(188,569)
$ 188,547
$ 12,064
$ 20,669
$ 34,177
$ (8,907)
$ (28,427)
7,567
$
8,907
$
$ 10,442
$ (5,967)
$ (2,761)
8,106
$
5,967
$
production (units)(4) . . . . . . . . . . . . . . . . . .
212,000
378,000
341,000
269,000
182,000
(1) Share-based compensation expense in 2004 is related to options issued in conjunction with our IPO that vested
immediately. Subsequent share-based compensation is recorded in selling, general and administrative
expenses.
(2) Earnings (loss) per share has been calculated giving effect to the reclassification of our outstanding classes of
common stock into one class of common stock and, in connection therewith, a 38.991-to-one stock split.
(3) Adjusted EBITDA is a non-GAAP financial measure that is reconciled to net income, its most directly
comparable GAAP measure, in the accompanying financial tables. Adjusted EBITDA is defined as net earnings
before interest, taxes, depreciation, amortization, gains/losses on the early extinguishment of debt, restructuring
charges, miscellaneous income/expenses and cumulative effect of changes in accounting principle. In calcu-
lating Adjusted EBITDA, we exclude the effects of gains/losses on the early extinguishment of debt,
restructuring charges, miscellaneous income/expenses and cumulative effect of changes in accounting prin-
ciples because our management believes that some of these items may not occur in certain periods, the amounts
recognized can vary significantly from period to period and these items do not facilitate an understanding of our
operating performance. Our management utilizes Adjusted EBITDA, in addition to the supplemental infor-
mation, as an operating performance measure in conjunction with GAAP measures, such as net income and
gross margin calculated in conformity with GAAP.
Our management uses Adjusted EBITDA, in addition to the supplemental information, as an integral part of its
reporting and planning processes and as one of the primary measures to, among other things:
(i) monitor and evaluate the performance of our business operations;
(ii) facilitate management’s internal comparisons of our historical operating performance of our business
operations;
(iii) facilitate management’s external comparisons of the results of our overall business to the historical
operating performance of other companies that may have different capital structures and debt levels;
(iv) review and assess the operating performance of our management team and as a measure in evaluating
employee compensation and bonuses;
(v) analyze and evaluate financial and strategic planning decisions regarding future operating
investments; and
(vi) plan for and prepare future annual operating budgets and determine appropriate levels of operating
investments.
Our management believes that Adjusted EBITDA, in addition to the supplemental information, is useful to
investors as it provides them with disclosures of our operating results on the same basis as that used by our
management. Additionally, our management believes that Adjusted EBITDA, in addition to the supplemental
information, provides useful information to investors about the performance of our overall business because the
32
measure eliminates the effects of certain recurring and other unusual or infrequent charges that are not directly
attributable to our underlying operating performance. Additionally, our management believes that because we have
historically provided a non-GAAP financial measure in previous filings, that continuing to include a non-GAAP
measure in our filings provides consistency in our financial reporting and continuity to investors for comparability
purposes. Accordingly, we believe that the presentation of Adjusted EBITDA, when used in conjunction with the
supplemental information and GAAP financial measures, is a useful financial analysis tool, used by our man-
agement as described above, that can assist investors in assessing our financial condition, operating performance
and underlying strength. Adjusted EBITDA should not be considered in isolation or as a substitute for net income
prepared in conformity with GAAP. Other companies may define Adjusted EBITDA differently. Adjusted
EBITDA, as well as the other information in this filing, should be read in conjunction with our financial statements
and footnotes contained in the documents that we file with the U.S. Securities and Exchange Commission.
The following is a reconciliation of Net Income to Adjusted EBITDA:
Net (loss) income. . . . . . . . . . . . . . . . . . . . . . . . . . $ (3,251)
Add (subtract):
2007
2006
Years Ended December 31,
2005
(In thousands)
$ 49,411
$ 58,050
2004
$17,449
Depreciation and amortization . . . . . . . . . . . . . .
Interest expense . . . . . . . . . . . . . . . . . . . . . . . . .
(Benefit) provision for income taxes . . . . . . . . . .
Loss on early extinguishment of debt . . . . . . . . .
Restructuring charges . . . . . . . . . . . . . . . . . . . . .
Miscellaneous (income) expense . . . . . . . . . . . . .
16,425
14,147
(1,585)
149
1,433
(22)
14,983
14,829
27,745
318
—
(15)
12,064
13,195
29,138
1,525
—
52
7,567
7,244
6,481
1,605
—
43
2003
$ 3,964
8,106
9,796
5,267
2,972
—
—
Adjusted EBITDA . . . . . . . . . . . . . . . . . . . . . . . $27,296
$115,910
$105,385
$40,389
$30,105
Supplemental Information:
Noncash loss (gain) on forward exchange
contracts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9,967
$ (4,203)
$ (3,793)
$ (1,290)
$ 3,230
Nonrecurring (benefit) provision for prior period
debt service . . . . . . . . . . . . . . . . . . . . . . . . . . $ (584)
$
750
$
— $ — $ —
(4) Source: Americas Commercial Transportation Research Co. LLC and ACT Publications.
33
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
You should read the following discussion and analysis in conjunction with the information set forth under
“Item 6 — Selected Financial Data” and our consolidated financial statements and the notes thereto included in
Item 8 in this Annual Report on Form 10-K. The statements in this discussion regarding industry outlook, our
expectations regarding our future performance, liquidity and capital resources and other non-historical statements
in this discussion are forward-looking statements. See “Forward-Looking Information” on page ii of this Annual
Report on Form 10-K. These forward-looking statements are subject to numerous risks and uncertainties, including,
but not limited to, the risks and uncertainties described under “Item 1A — Risk Factors.” Our actual results may
differ materially from those contained in or implied by any forward-looking statements.
Company Overview
We are a leading supplier of fully integrated system solutions for the global commercial vehicle market,
including the Heavy-duty (Class 8) truck market, the construction, military, bus and agriculture market and the
specialty transportation markets. As a result of our strong leadership in cab-related products and systems, we are
positioned to benefit from the increased focus of our customers on cab design and comfort and convenience features
to better serve their end-user, the driver. Our products include suspension seat systems, interior trim systems
(including instrument panels, door panels, headliners, cabinetry and floor systems), cab structures and components,
mirrors, wiper systems, electronic wire harness assemblies and controls and switches specifically designed for
applications in commercial vehicles.
We are differentiated from suppliers to the automotive industry by our ability to manufacture low volume
customized products on a sequenced basis to meet the requirements of our customers. We believe that we have the
number one or two position in most of our major markets and that we are the only supplier in the North American
commercial vehicle market that can offer complete cab systems including cab body assemblies, sleeper boxes,
seats, interior trim, flooring, wire harnesses, panel assemblies and other structural components. We believe our
products are used by virtually every major North American heavy truck commercial vehicle OEM, which we
believe creates an opportunity to cross-sell our products and offer a fully integrated system solution.
Demand for our products is generally dependent on the number of new heavy truck commercial vehicles
manufactured in North America, which in turn is a function of general economic conditions, interest rates, changes
in governmental regulations, consumer spending, fuel costs and our customers’ inventory levels and production
rates. New heavy truck commercial vehicle demand has historically been cyclical and is particularly sensitive to the
industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial
vehicles. Production of heavy truck commercial vehicles in North America initially peaked in 1999 and experienced
a downturn from 2000 to 2003 that was due to a weak economy, an oversupply of new and used vehicle inventory
and lower spending on heavy truck commercial vehicles and equipment. Demand for commercial vehicles
improved in 2006 due to broad economic recovery in North America, corresponding growth in the movement
of goods, the growing need to replace aging truck fleets and OEMs received larger than expected pre-orders in
anticipation of the new EPA emissions standards becoming effective in 2007. During 2007, the demand for North
American Class 8 heavy trucks experienced a downturn as a result of pre-orders in 2006 and general weakness in the
North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in
North America.
In 2007, approximately 41% of our revenue was generated from sales to North American heavy-duty truck
OEMs. Our remaining revenue in 2007 was primarily derived from sales to OEMs in the global construction market,
the aftermarket, OEM service organizations and other commercial vehicle and specialty markets. Demand for our
products is also driven to a significant degree by preferences of the end-user of the commercial vehicle, particularly
with respect to Heavy-duty (Class 8) trucks. Unlike the automotive industry, commercial vehicle OEMs generally
afford the ultimate end-user the ability to specify many of the component parts that will be used to manufacture the
commercial vehicle, including a wide variety of cab interior styles and colors, the brand and type of seats, type of
seat fabric and color and specific mirror styling. In addition, certain of our products are only utilized in Heavy-duty
(Class 8) trucks, such as our storage systems, sleeper boxes, sleeper bunks and privacy curtains, and, as a result,
changes in demand for Heavy-duty (Class 8) trucks or the mix of options on a vehicle can have a greater impact on
34
our business than changes in the overall demand for commercial vehicles. To the extent that demand increases for
higher content vehicles, our revenues and gross profit will be positively impacted.
Demand for our products is also dependent on the overall vehicle demand for new commercial vehicles in the
global construction equipment market and generally follows certain economic conditions around the world. Within
the construction market, there are two classes of construction equipment, the medium/heavy equipment market
(weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons).
Demand in the medium/heavy construction equipment market is typically related to the level of larger scale
infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development
as well as activity in the mining, forestry and other raw material based industries. Demand in the light construction
equipment market is typically related to certain economic conditions such as the level of housing construction and
other smaller-scale developments and projects. Our products are primarily used in the medium/heavy construction
equipment markets.
Along with North America, we have operations in Europe, China, Australia and Mexico. Our operating results
are, therefore, impacted by exchange rate fluctuations to the extent we are unable to match revenues received in
such currencies with costs incurred in such currencies. Strengthening of these foreign currencies as compared to the
U.S. dollar resulted in an approximate $11.0 million increase in our revenues in 2007 as compared to 2006 and an
approximate $3.0 million increase in 2006 as compared to 2005. Because our costs were generally impacted to the
same degree as our revenue, this exchange rate fluctuation did not have a material impact on our net income in 2007
as compared to 2006 and 2006 compared to 2005.
We continuously seek ways to improve our operating performance by lowering costs. These efforts include, but
are not limited to, the following:
(cid:129) sourcing efforts in Europe and Asia;
(cid:129) consolidating our supply base to improve purchasing leverage;
(cid:129) eliminating excess production capacity through the closure and consolidation of manufacturing or assembly
facilities; and
(cid:129) implementing Lean Manufacturing and Total Quality Production System (“TQPS”) initiatives to improve
operating efficiency and product quality.
Although OEM demand for our products is directly correlated with new vehicle production, we also have the
opportunity to grow through increasing our product content per vehicle through cross selling and bundling of
products. We generally compete for new business at the beginning of the development of a new vehicle platform and
upon the redesign of existing programs. New platform development generally begins at least one to three years
before the marketing of such models by our customers. Contract durations for commercial vehicle products
generally extend for the entire life of the platform, which is typically five to seven years.
In sourcing products for a specific platform, the customer generally develops a proposed production timetable,
including current volume and option mix estimates based on their own assumptions, and then sources business with
the supplier pursuant to written contracts, purchase orders or other firm commitments in terms of price, quality,
technology and delivery. In general, these contracts, purchase orders and commitments provide that the customer
can terminate if a supplier does not meet specified quality and delivery requirements and, in many cases, they
provide that the price will decrease over the proposed production timetable. Awarded business generally covers the
supply of all or a portion of a customer’s production and service requirements for a particular product program
rather than the supply of a specific quantity of products. Accordingly, in estimating awarded business over the life of
a contract or other commitment, a supplier must make various assumptions as to the estimated number of vehicles
expected to be produced, the timing of that production, mix of options on the vehicles produced and pricing of the
products being supplied. The actual production volumes and option mix of vehicles produced by customers depend
on a number of factors that are beyond a supplier’s control.
35
Recent Acquisitions
In October 2007, we acquired all of the outstanding common stock of PEKM Kabeltechnik s.r.o. (“PEKM”),
an electronic wire harness manufacturer primarily for the commercial truck market, with facilities in the Czech
Republic and the Ukraine. The PEKM acquisition was financed with borrowings under our revolving credit facility.
The operating results of PEKM have been included in our 2007 consolidated financial statements since the date of
acquisition.
In October 2007, we acquired the heavy-gauge thermoforming and injection molding assets of the Fabrication
Division of Gage Industries, Inc. (“Gage”), with facilities in Tigard and Lake Oswego, Oregon. The Gage
acquisition was financed with borrowings under our revolving credit facility. The operating results of Gage have
been included in our 2007 consolidated financial statements since the date of acquisition.
In December 2007, we acquired substantially all of the assets of Short Bark Industries, LLC (“SBI”), a supplier
of seat covers and various cut-and-sew trim products, with facilities in Tellico Plains and Pikeville, Tennessee The
SBI acquisition was financed with borrowings under our revolving credit facility. The operating results of SBI have
been included in our 2007 consolidated financial statements since the date of acquisition.
See Note 3 to our consolidated financial statements contained in Item 8 of this Annual Report on Form 10-K
for detailed information on these transactions.
Critical Accounting Policies and Estimates
Our consolidated financial statements are prepared in conformity with accounting principles generally
accepted in the United States of America (“U.S. GAAP”). For a comprehensive discussion of our accounting
policies, see Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.
The preparation of our consolidated financial statements requires us to make estimates and assumptions that
affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of
the financial statements and the reported amounts of revenues and expenses during the reporting period. These
estimates and assumptions, particularly relating to revenue recognition and sales commitments, provision for
income taxes, restructuring and impairment charges and litigation and contingencies may have a material impact on
our financial statements, and are discussed in detail throughout our analysis of our results of operations.
In addition to evaluating estimates relating to the items discussed above, we also consider other estimates,
including, but not limited to, those related to allowance for doubtful accounts, defined benefit pension plan
assumptions, uncertain tax positions and goodwill and other intangible assets. We base our estimates on historical
experience and various other assumptions that we believe are reasonable under the circumstances, the results of
which form the basis for making judgments about the carrying value of assets, liabilities and equity that are not
readily apparent from other sources. Actual results and outcomes could differ materially from these estimates and
assumptions. See Item 1A — Risk Factors for additional information regarding risk factors that may impact our
estimates.
We apply the following critical accounting polices in the preparation of our consolidated financial statements.
Revenue Recognition and Sales Commitments — We recognize revenue in accordance with the SEC’s Staff
Accounting Bulletin (“SAB”) No. 101, Revenue Recognition in Financial Statements, and SAB No. 104, Revenue
Recognition, and other authoritative accounting literature. These pronouncements generally require that we
recognize revenue when (1) delivery has occurred or services have been rendered, (2) persuasive evidence of
an arrangement exists, (3) there is a fixed or determinable price and (4) collectibility is reasonably assured. Our
products are generally shipped from our facilities to our customers, which is when legal title passes to the customer
for substantially all of our revenues. We enter into agreements with our customers at the beginning of a given
platform’s life to supply products for that platform. Once we enter into such agreements, fulfillment of our
purchasing requirements is our obligation for the entire production life of the platform, with terms generally ranging
from five to seven years, and we have no provisions to terminate such contracts.
Provisions for anticipated contract losses are recognized at the time they become evident. In certain instances,
we may be committed under existing agreements to supply product to our customers at selling prices that are not
36
sufficient to cover the cost to produce such product. In such situations, we record a provision for the estimated future
amount of such losses. Such losses are recognized at the time that the loss is probable and reasonably estimable and
are recorded at the minimum amount necessary to fulfill our obligations to our customers. We had a provision for
anticipated contract losses of $0.4 million as of December 31, 2007. We had no such provision as of December 31,
2006 and $0.1 million at December 31, 2005.
Goodwill and Intangible Assets — Goodwill represents the excess of acquisition purchase price over the fair
value of net assets acquired. We review goodwill and indefinite-lived intangible assets for impairment annually in
the second fiscal quarter and whenever events or changes in circumstances indicate the carrying value may not be
recoverable in accordance with Statement of Financial Accounting Standard (“SFAS”) No. 142, Goodwill and
Intangible Assets. We review indefinite and definite-lived intangible assets in accordance with the provisions of
SFAS No. 142 and SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets. The provisions
of SFAS No. 142 require that a two-step impairment test be performed on goodwill. In the first step, we compare the
fair value of the reporting unit to the carrying value. Our reporting unit is consistent with the reportable segment
identified in Note 10 to our consolidated financial statements contained in this Annual Report on Form 10-K for the
year ended December 31, 2007. If the fair value of the reporting unit exceeds the carrying value of the net assets
assigned to that unit, goodwill is considered not impaired and we are not required to perform further testing. If the
carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, then we
must perform the second step of the impairment test in order to determine the implied fair value of the reporting
unit’s goodwill. If the carrying value of a reporting unit’s goodwill exceeds its implied fair value, then we would
record an impairment loss equal to the difference. SFAS No. 142 also requires that the fair value of the purchased
intangible assets with indefinite lives be estimated and compared to the carrying value. We estimate the fair value of
these intangible assets using an income approach. We recognize an impairment loss when the estimated fair value of
the intangible asset is less than the carrying value. In this regard, our management considers the following indicators
in determining if events or changes in circumstances have occurred indicating that the recoverability of the carrying
amount of indefinite-lived and amortizing intangible assets should be assessed: (1) a significant decrease in the
market value of an asset; (2) a significant change in the extent or manner in which an asset is used or a significant
physical change in an asset; (3) a significant adverse change in legal factors or in the business climate that could
affect the value of an asset or an adverse action or assessment by a regulator; (4) an accumulation of costs
significantly in excess of the amount originally expected to acquire or construct an asset; and (5) a current period
operating or cash flow loss combined with a history of operating or cash flow losses or a projection or forecast that
demonstrates continuing losses associated with an asset used for the purpose of producing revenue. Our annual
goodwill analysis was performed during the second quarter of fiscal 2007 and did not result in an impairment
charge.
Annually, or more frequently if events or circumstances change, a determination is made by management, in
accordance with SFAS No. 144 to ascertain whether property and equipment and certain definite-lived intangibles
have been impaired based on the sum of expected future undiscounted cash flows from operating activities. If the
estimated net cash flows are less than the carrying amount of such assets, we will recognize an impairment loss in an
amount necessary to write down the assets to fair value as determined from expected future discounted cash flows.
In accordance with SFAS 142, we test intangible assets with indefinite lives and goodwill for impairment annually
or when conditions indicate impairment may have occurred.
Determining the fair value of a reporting unit is judgmental in nature and involves the use of significant
estimates and assumptions. These estimates and assumptions include revenue growth rates and operating margins
used to calculate projected future cash flows, risk-adjusted discount rates, future economic and market conditions
and determination of appropriate market comparables. We base our fair value estimates on assumptions we believe
to be reasonable but that are unpredictable and inherently uncertain. The valuation approaches we use include the
Income Approach (the Discounted Cash Flow Method) and the Market Approach (the Guideline Company and
Transaction Methods) to estimate the fair value of the reporting unit; earnings are emphasized in the Discounted
Cash Flow, Guideline Company, and the Transaction Methods. In addition, these methods utilize market data in the
derivation of a value estimate and are forward-looking in nature. The Discounted Cash Flow Method utilizes a
market-derived rate of return to discount anticipated performance, while the Guideline Company Method and the
37
Transaction Method incorporate multiples that are based on the market’s assessment of future performance. Actual
future results may differ materially from those estimates.
Intangible Assets — Indefinite-Lived
Basis for Accounting Treatment
Our indefinite-lived intangible assets consist of customer relationships acquired in the 2005 acquisitions of
Mayflower and Monona. We have accounted for these customer relationships as indefinite-lived intangible assets,
which we believe is appropriate based upon the following circumstances and conditions under which we operate:
Sourcing, Barriers to Entry and Competitor Risks
The customer sourcing decision for the Mayflower and Monona businesses is heavily predicated on price,
quality, delivery and the overall customer relationship. Absent a significant change in any or all of these factors, it is
unlikely that a customer would source production to an alternate supplier. In addition, the factors listed below
impose a high barrier for new competitors to enter into this industry. Historical experience indicates that Mayflower
and Monona have not lost any primary customers and/or relationships due to these factors and such loss is not
anticipated in the foreseeable future for the following reasons:
(cid:129) Costs associated with setting up a new production line, including tooling costs, are typically cost prohibitive
in a competitive pricing environment;
(cid:129) The risk associated with potential production delays and a disruption to the supply chain typically outweighs
any potential economic benefit;
(cid:129) Significant initial outlays of capital and institutional production knowledge represent a significant barrier to
entry. Due to the asset-intensive nature of the businesses, a new competitor would require a substantial
amount of initial capital;
(cid:129) Changeover costs are high both from an economic and risk standpoint;
(cid:129) The highly complex nature of successfully producing electronic wiring harnesses and complete cab
structures in accordance with OEM quality standards makes it difficult for a competitor to enter the
business; and
(cid:129) There is significant risk in operating the businesses as a result of the highly customized nature of the
business. For example, production runs in the commercial vehicle business are significantly smaller and are
more “build to order” in nature which requires the systems, expertise, equipment and logistics in order to be
successful.
These costs and risks are the primary prohibiting factors which preclude our customers from sourcing their
business elsewhere at any given time.
Duration and Strength of Existing Customer Relationships/Concentrations of Revenue
Mayflower and Monona have long-standing relationships with their existing customers and have experienced
de minimis historical attrition. These relationships have endured over time and, accordingly, an assumption of
prospective attrition is inconsistent with this historical experience and management’s expectations. Both May-
flower and Monona have a limited customer base, consisting of three primary customers, that has existed for many
years, and we had pre-existing long-standing relationships with the same primary customers prior to the acqui-
sitions of Mayflower and Monona, which in most cases have exceeded a period of 40 years. We believe the addition
of Mayflower and Monona further strengthens our existing customer relationships with such customers.
Specifically:
Mayflower and Monona’s relationships with their customers’ key decision-making personnel are mature and
stable.
38
(cid:129) Mayflower’s and Monona’s customers typically make purchasing decisions through a team approach versus
a single decision maker. Mayflower and Monona have historically maintained strong relationships with
individuals at all levels of the decision making process including the engineering, operations and purchasing
functions in order to successfully minimize the impact of any employee turnover at the customer level.
The top three customers of Mayflower and Monona have been established customers for a substantial period of
time.
(cid:129) Mayflower has had relationships with Volvo/Mack, Freightliner and International since 1965, 1997 and
2001, respectively. We and/or our predecessor entities, had pre-existing relationships with these same
customers since 1949, 1954 and 1950, respectively. These customers comprised approximately 89%, 88%
and 85% of Mayflower’s revenues for fiscal years 2007, 2006 and 2005, respectively.
(cid:129) Monona has had relationships with Deere & Co., Caterpillar and Oshkosh since 1969, 1970 and 1985,
respectively. We and/or our predecessor entities, had pre-existing relationships with these same customers
since 1987, 1958 and 1950, respectively. These customers comprised approximately 84%, 85% and 88% of
Monona’s revenues for fiscal years 2007, 2006 and 2005, respectively.
Valuation Methodology
For valuation purposes, the income approach using the discounted cash flow method was employed for the
purpose of evaluating the Mayflower and Monona customer relationship intangible assets. Under this approach, we
determined that the fair value of the Mayflower and Monona customer relationship intangible assets at their dates of
acquisition was $45.9 million and $28.9 million, respectively.
Significant assumptions used in the valuation and determination of an indefinite useful life for these customer
relationship intangible assets included the following:
(cid:129) The revenue projections that we relied upon to substantiate the economic consideration paid for the
businesses is almost exclusively tied to the existing customer base. With regard to the valuation process, we
projected less than 1% of total revenue in 2005 and 2006 to be lost due to core customer attrition and no core
customer attrition thereafter.
(cid:129) Contributory asset charges were deducted for assets that contribute to income generation including: (i) net
working capital; (ii) personal property; (iii) real property; (iv) tradename and trademarks; and (v) an
assembled workforce.
(cid:129) The cash flows associated with the customer relationships acquired in the Mayflower and Monona
transactions were discounted at a rate of return of 25.0% and 29.5%, respectively, which is approximately
equal to the equity rate of return.
Intangible Asset Impairment — Accounting Treatment
If Mayflower and/or Monona were to prospectively lose any of their customers, in accordance with the
provisions of paragraphs 16 and 17 of SFAS No. 142, we would perform an intangible asset impairment test to
determine the impact of the loss on the customer relationship intangible asset and if impairment was indicated, we
would record an impairment loss in our consolidated statement of operations.
Accounting for Income Taxes — As part of the process of preparing our consolidated financial statements, we
are required to estimate our income taxes in each of the jurisdictions in which we operate. In addition, tax expense
includes the impact of differing treatment of items for tax and accounting purposes which result in deferred tax
assets and liabilities which are included in our consolidated balance sheet. To the extent that recovery of deferred
tax assets is not likely, we must establish a valuation allowance. Significant judgment is required in determining our
provision for income taxes, deferred tax assets and liabilities and any valuation allowance recorded against our net
deferred tax assets. As of December 31, 2007, we determined that a valuation allowance of $1.3 million was needed
against our deferred tax assets. This valuation allowance is related to the inability to use certain foreign tax credits
and state operating losses that are being carried forward prior to their expiration. In the event that our actual results
differ from our estimates or we adjust these estimates in future periods, the effects of these adjustments could
39
materially impact our financial position and results of operations. The net deferred tax liability as of December 31,
2007 was $14.1 million. We adopted Financial Accounting Standards Board (“FASB”) Interpretation No. 48,
Accounting for Uncertainty in Income Taxes — an Interpretation of FASB Statement No. 109, (“FIN 48”) in the first
quarter 2007. The adoption of this interpretation changed the manner in which we evaluate recognition and
measurement of uncertain tax positions. See “Recently Issued Accounting Pronouncements” in Note 2 to our
consolidated financial statements for further information regarding the adoption of this authoritative literature.
Warranties — We are subjected to warranty claims for products that fail to perform as expected due to design
or manufacturing deficiencies. Customers continue to require their outside suppliers to guarantee or warrant their
products and bear the cost of repair or replacement of such products. Depending on the terms under which we
supplied products to our customers, a customer may hold us responsible for some or all of the repair or replacement
costs of defective products, when the product supplied did not perform as represented. Our policy is to reserve for
estimated future customer warranty costs based on historical trends and current economic factors. The amount of
such estimates for warranty provisions was approximately $4.0 million, $5.2 million and $7.1 million at Decem-
ber 31, 2007, 2006 and 2005, respectively.
Pension and Other Post-Retirement Benefit Plans — We sponsor pension and other post-retirement benefit
plans that cover certain hourly and salaried employees in the United States and United Kingdom. Our policy is to
make annual contributions to the plans to fund the normal cost as required by local regulations. In addition, we have
an other post-retirement benefit plan for certain U.S. operations, retirees and their dependents.
Our Assumptions
The determination of pension and other post-retirement benefit plan obligations and related expenses requires
the use of assumptions to estimate the amount of the benefits that employees earn while working, as well as the
present value of those benefits. Our assumptions are determined based on current market conditions, historical
information and consultation with and input from our actuaries. Due to the significant management judgment
involved, our assumptions could have a material impact on the measurement of our pension and other post-
retirement benefit expenses and obligations.
Significant assumptions used to measure our annual pension and other post-retirement benefit expenses
include:
(cid:129) discount rate;
(cid:129) expected return on plan assets; and
(cid:129) health care cost trend rates.
Discount Rate — The discount rate represents the interest rate that should be used to determine the present
value of future cash flows currently expected to be required to settle the pension and other post-retirement benefit
obligations. In estimating this rate, we consider rates of return on high quality fixed-income investments included in
various published bond indexes. We consider the Moody’s Aa Corporate Bond Index and the Barclay’s Capital AA
Rated Sterling Bond Index in the determination of the appropriate discount rate assumptions. The weighted average
rate we used to measure our pension obligation as of December 31, 2007 was 6.0% for the U.S. and 5.9% for the
non-U.S. pension plans.
Expected Long-Term Rate of Return — The expected return on pension plan assets is based on our historical
experience, our pension plan investment strategy and our expectations for long-term rates of return. Our pension
plan investment strategy is reviewed annually and is established based upon plan liabilities, an evaluation of market
conditions, tolerance for risk and cash requirements for benefit payments. We use a third-party advisor to assist us in
determining our investment allocation and modeling our long-term rate of return assumptions. For 2007 and 2006,
we assumed an expected long-term rate of return on plan assets of 7.5% and 8.5%, respectively, for the U.S. pension
plans and 6.0% and 6.0%, respectively, for the non-U.S. pension plans.
40
Changes in the discount rate and expected long-term rate of return on plan assets within the range indicated
below would have had the following impact on 2007 pension and other post-retirement benefits results (in
thousands):
1 Percentage
Point Increase
1 Percentage
Point Decrease
(Decrease) increase due to change in assumptions used to determine
net periodic benefit costs for the year ended December 31, 2007:
Discount rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expected long-term rate of return on plan assets . . . . . . . . . . . . . . .
(Decrease) increase due to change in assumptions used to determine
benefit obligations for the year ended December 31, 2007:
Discount rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
$
(289)
(572)
$
$
510
572
$(11,849)
$15,291
Health Care Cost Trend Rates — The health care cost trend rates represent the annual rates of change in the
cost of health care benefits based on estimates of health care inflation, changes in health care utilization or delivery
patterns, technological advances and changes in the health status of the plan participants. For measurement
purposes, a 10.0% annual rate of increase in the per capita cost of covered health care benefits was assumed for 2007
and 2006. The rate was assumed to decrease gradually to 5.5% through 2013 and remain constant thereafter.
Assumed health care cost trend rates can have a significant effect on the amounts reported for other post-retirement
benefit plans.
Differences in the ultimate health care cost trend rates within the range indicated below would have had the
following impact on 2007 other post-retirement benefit results (in thousands):
1 Percentage
Point Increase
1 Percentage Point
Decrease
Increase (Decrease) from change in health care cost trend rates
Other post-retirement benefit expense . . . . . . . . . . . . . . . . . . . .
Other post-retirement benefit liability . . . . . . . . . . . . . . . . . . . . .
$ 31
$105
$(38)
$(98)
Recently Issued Accounting Pronouncements
See Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K for a full
description of recently issued and/or adopted accounting pronouncements.
41
Results of Operations
The table below sets forth certain operating data expressed as a percentage of revenues for the periods
indicated:
2007
2006
2005
Revenues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cost of revenues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100.0% 100.0% 100.0%
83.7
89.0
82.2
Gross profit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selling, general and administrative expenses . . . . . . . . . . . . . . . . . . . . . . .
Amortization expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restructuring charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other expense (income) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interest expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loss on early extinguishment of debt . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.0
8.0
0.1
0.2
2.7
1.3
2.0
—
(Loss) income before income taxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Benefit) provision for income taxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(0.6)
(0.2)
16.3
5.7
—
—
10.6
(0.4)
1.6
—
9.4
3.0
17.8
5.9
—
—
11.9
(0.5)
1.7
0.2
10.5
3.9
Net (loss) income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(0.4)% 6.4% 6.6%
Year Ended December 31, 2007 Compared to Year Ended December 31, 2006
Revenues. Revenues decreased $222.0 million, or 24.2%, to $696.8 million for the year ended December 31,
2007 from $918.8 million for the year ended December 31, 2006. This decrease resulted primarily from:
(cid:129) a 43.9% decrease in North American Heavy-duty (Class 8) truck production, fluctuations in production
levels for other North American end markets and net new business awards resulted in approximately
$270.4 million of decreased revenues;
The decrease was partially offset by:
(cid:129) increased acquisition related revenue of approximately $29.0 million from the full year impact of the
acquisition of C.I.E.B. and the partial year impact of PEKM and Gage;
(cid:129) an increase in production levels, fluctuations in content and net new business awards for our European,
Australian and Asian markets of approximately $8.4 million;
(cid:129) favorable foreign exchange fluctuations and adjustments of approximately $11.0 million.
Gross Profit. Gross profit decreased $73.2 million, or 48.9%, to $76.6 million for the year ended
December 31, 2007 from $149.8 million for the year ended December 31, 2006. As a percentage of revenues,
gross profit decreased to 11.0% for the year ended December 31, 2007 from 16.3% for the year ended December 31,
2006. This decrease resulted primarily from the our inability to reduce fixed costs proportionate to the decrease in
revenues from the prior period. We continued to seek material cost reductions, labor efficiencies and general
operating cost reductions to generate additional profits during the year ended December 31, 2007.
Selling, General and Administrative Expenses. Selling, general and administrative expenses increased
$3.5 million, or 6.8%, to $55.5 million for the year ended December 31, 2007 from $52.0 million for the year
ended December 31, 2006. The increase resulted primarily from higher wages and benefits, travel expenses,
currency fluctuations as well as increased stock compensation expense, partially offset by reduced incentive
compensation expense as compared to the prior year.
Amortization Expense. Amortization expense increased to approximately $0.9 million for the year ended
December 31, 2007 from approximately $0.4 million for the year ended December 31, 2006. This increase was
primarily the result of breakout of definite-lived intangible assets for the C.I.E.B. and PEKM acquisitions.
42
Restructuring Charges.
In 2007, we approved the closure of our Seattle, Washington facility. In connection
with the closure we incurred restructuring charges of approximately $1.4 million during the year ended
December 31, 2007.
Other Expense (Income). We use forward exchange contracts to hedge foreign currency transaction expo-
sures of our United Kingdom operations. We estimate our projected revenues in certain foreign currencies or
locations and will hedge a portion of the anticipated long or short position. We have not designated any of our
forward exchange contracts as cash flow hedges, electing instead to mark-to-market the contracts and record the fair
value of the contracts on our consolidated balance sheets, with the offsetting noncash gain or loss recorded in our
consolidated statement of operations. The $9.4 million expense for the year ended December 31, 2007 and the
$3.5 million gain for the year ended December 31, 2006 are primarily related to the noncash change in value of the
forward exchange contracts in existence at the end of each period.
Interest Expense.
Interest expense decreased $0.7 million to $14.1 million for the year ended December 31,
2007 from $14.8 million for the year ended December 31, 2006. This decrease was primarily the result of lower
average outstanding debt balances.
Loss on Early Extinguishment of Debt.
In June 2007, we repaid our foreign denominated term loan in full. In
connection with this loan repayment, we wrote off a proportionate amount of our debt financing costs of
approximately $0.1 million. In connection with our June 30, 2006 repayment of approximately $25.0 million
of our U.S. Dollar denominated term loan, we wrote off a proportionate amount of our debt financing costs of
approximately $0.3 million.
(Benefit) Provision for Income Taxes. Our effective tax rate during the year ended December 31, 2007 was
32.8% compared to 32.3% for 2006. Provision for income taxes decreased $29.3 million to a benefit of $1.6 million
for the year ended December 31, 2007, compared to an income tax provision of $27.7 million for the year ended
December 31, 2006. The increase in effective rate year over year can be primarily attributed to the decrease in
income before taxes and release of certain tax reserves.
Net (Loss) Income. Net income decreased $61.4 million to a loss of $3.3 million for the year ended
December 31, 2007, compared to net income of $58.1 million for the year ended December 31, 2006, primarily as a
result of the factors discussed above.
Year Ended December 31, 2006 Compared to Year Ended December 31, 2005
Revenues. Revenues increased $164.3 million, or 21.8%, to $918.8 million for the year ended December 31,
2006 from $754.5 million for the year ended December 31, 2005. This increase resulted primarily from:
(cid:129) increased acquisition related revenue of approximately $77.0 million from the full year impact of the
acquisitions of Mayflower, Monona, Cabarrus and the partial year impact of C.I.E.B.;
(cid:129) a 10.9% increase in North American Heavy-duty (Class 8) truck production, fluctuations in production
levels for other North American end markets and net new business awards resulted in approximately
$88.0 million of increased revenues;
(cid:129) an increase in production levels, fluctuations in content and net new business awards for our European,
Australian and Asian markets of approximately $2.5 million;
(cid:129) unfavorable foreign exchange fluctuations and adjustments of approximately $3 million.
Gross Profit. Gross profit increased $15.3 million, or 11.4%, to $149.8 million for the year ended
December 31, 2006 from $134.5 million for the year ended December 31, 2005. As a percentage of revenues,
gross profit decreased to 16.3% for the year ended December 31, 2006 from 17.8% for the year ended December 31,
2005. This decrease resulted primarily from the result of various raw material cost increases as well as certain
operational and other one-time events during the year. We continued to seek material cost reductions, labor
efficiencies and general operating cost reductions to generate additional profits during the year ended December 31,
2006.
43
Selling, General and Administrative Expenses. Selling, general and administrative expenses increased
$7.4 million, or 16.6%, to $52.0 million for the year ended December 31, 2006 from $44.6 million for the year
ended December 31, 2005. This increase resulted primarily from the full year impact of the acquisitions of
Mayflower, Monona and Cabarrus during 2005 as well as increases in wages and the cost of adopting FAS 123(R)
during the year ended December 31, 2006.
Amortization Expense. Amortization expense increased to approximately $414 thousand for the year ended
December 31, 2006 from approximately $358 thousand for the year ended December 31, 2005. This increase was
primarily the result of the full year impact of the Mayflower and Monona acquisitions.
Other (Income). We use forward exchange contracts to hedge foreign currency transaction exposures of our
United Kingdom operations. We estimate our projected revenues in certain foreign currencies or locations and will
hedge a portion of the anticipated long or short position. We have not designated any of our forward exchange
contracts as cash flow hedges, electing instead to mark-to-market the contracts and record the fair value of the
contracts on our consolidated balance sheets, with the offsetting noncash gain or loss recorded in our consolidated
statement of operations. The $3.5 million gain for the year ended December 31, 2006 and the $3.7 million gain for
the year ended December 31, 2005 are primarily related to the noncash change in value of the forward exchange
contracts in existence at the end of each period.
Interest Expense.
Interest expense increased $1.6 million to $14.8 million for the year ended December 31,
2006 from $13.2 million for the year ended December 31, 2005. This increase was primarily the result of higher
average interest rates during the year.
Loss on Early Extinguishment of Debt.
In 2006, we repaid approximately $25.0 million of our U.S. dollar
denominated term loan. In connection with this loan repayment, approximately $0.3 million of deferred fees were
written off. In 2005, as part of our 2005 issuance of 8.0% senior notes due 2013, we amended our existing senior
credit agreement and wrote off approximately $1.5 million of deferred fees.
Provision for Income Taxes. Our effective tax rate during the year ended December 31, 2006 was 32.3%
compared to 37.1% for 2005. Provision for income taxes decreased $1.4 million to $27.7 million for the year ended
December 31, 2006, compared to an income tax provision of $29.1 million for the year ended December 31, 2005.
The decrease in effective rate year over year can be primarily attributed to the tax planning initiatives taken during
2006 which favorably impacted tax credits and provision rates.
Net Income. Net income increased $8.7 million to $58.1 million for the year ended December 31, 2006,
compared to $49.4 million for the year ended December 31, 2005, primarily as a result of the factors discussed
above.
Liquidity and Capital Resources
Cash Flows
For the year ended December 31, 2007, cash provided by operations was approximately $47.6 million,
compared to $36.9 million in the year ended December 31, 2006. This increase was primarily the result of the
change in accounts receivable during the year. Cash provided by operations in the year ended December 31, 2005
was $44.2 million.
Net cash used in investing activities was approximately $53.3 million for the year ended December 31, 2007
compared to $27.6 million in the year ended December 31, 2006 and $188.6 million in the year ended December 31,
2005. The amounts used in the year ended December 31, 2007 primarily reflect capital expenditure purchases
related to upgrades, replacements or new equipment, machinery and tooling as well as the acquisitions of PEKM,
Gage and SBI. The amounts used in the year December 31, 2006 primarily reflect capital expenditure purchases and
the acquisition of C.I.E.B.. The amounts used in the year ended December 31, 2005 primarily reflect capital
expenditure purchases and the acquisitions of Mayflower, Monona and Cabarrus.
Net cash used in financing activities totaled approximately $2.4 million for the year ended December 31, 2007,
compared to $28.0 million in the year ended December 31, 2006 and net cash provided by of $188.5 million in the
year ended December 31, 2005. The net cash used in financing activities in the year ended December 31, 2007 was
44
primarily related to the repayment of our foreign denominated term loan. The net cash used in financing activities
for December 31, 2006, was primarily related to our repayment of our U.S. dollar denominated term loan and the net
cash provided by financial activities for December 31, 2005 was primarily related to the issuance of our 8.0% senior
notes.
Debt and Credit Facilities
As of December 31, 2007, we had an aggregate of $159.7 million of outstanding indebtedness excluding
$1.8 million of outstanding letters of credit under various financing arrangements and an additional $81.8 million of
borrowing capacity under our revolving credit facility. We were in compliance with all of our respective financial
covenants under our debt and senior credit facility as of December 31, 2007. The indebtedness consisted of the
following:
(cid:129) $9.5 million under our revolving credit facility and $0.2 million of capital lease obligations. The weighted
average rate on these borrowings, for the year ended December 31, 2007, was approximately 8.5% with
respect to the revolving borrowings and;
(cid:129) $150 million of 8.0% senior notes due 2013.
On June 30, 2006, we repaid approximately $25.0 million of our U.S. dollar denominated term loan. The
repayment of the term loan reduced the principal amount of the term loan from approximately $40 million to
$15 million. In connection with this loan repayment, approximately $0.3 million of deferred fees, representing a
proportionate amount of total deferred fees, were expensed as a loss on early extinguishment of debt.
On June 29, 2007, we repaid our foreign denominated term loan in full. In connection with this loan repayment,
approximately $0.1 million of deferred fees, representing a proportionate amount of total deferred fees, were
expensed as a loss on early extinguishment of debt.
On August 16, 2007, we entered into an Amendment and Waiver Letter to the Revolving Credit and Term Loan
Agreement (the “Amendment and Waiver Letter”). Pursuant to the terms of the Amendment and Waiver Letter, the
lenders consented to increase the size of permitted acquisitions to $40 million per fiscal year and waived any default
or event of default in connection with intercompany loans, contributions to capital, investments in capital stock or
mixed stock and indebtedness certificates provided in connection with permitted acquisitions.
On September 28, 2007, we entered into the Tenth Amendment to the Revolving Credit and Term Loan
Agreement (the “Tenth Amendment”). Pursuant to the terms of the Tenth Amendment, the lenders consented to
various amendments, including but not limited to, changes to reporting requirements and financial ratios, which
included the fixed charge coverage ratio and the maximum ratio of total indebtedness. Based on the provisions of
AICPA’s Emerging Issues Task Force (EITF) Issue No. 98-14, Debtor’s Accounting for the Changes in Line-of-
Credit or Revolving-Debt Arrangements, approximately $0.1 million third party fees relating to the credit
agreement were capitalized and are being amortized over the remaining life of the senior credit agreement.
On March 11, 2008, we entered into the Eleventh Amendment to the Revolving Credit and Term Loan
Agreement (the “Eleventh Amendment”). Pursuant to the terms of the Eleventh Amendment, the banks party
thereto consented to various amendments to the senior credit agreement, including but not limited to: (i) amend-
ments to the fixed charge ratio and the leverage ratio to provide the Company increased flexibility in the near future;
(ii) an amendment to the applicable margin pricing grid to include increased rates for prime rate and LIBOR
borrowings when the Company’s leverage ratio is equal to or greater than 4.0x; (iii) a reduction in the size of the
revolving credit facility from $100 million to $50 million, subject to increases to $75 million and then to
$100 million upon satisfaction of certain conditions, including meeting certain financial covenant thresholds;
(iv) increases in certain baskets in the indebtedness, asset disposition, investment and lien covenants contained in
the senior credit agreement; and (v) an amendment to permit proposed future tax planning.
The revolving credit facility is available until January 31, 2010. Based on the provisions of EITF 98-14 and the
provisions of EITF Issue No. 96-19, Debtor’s Accounting for a Modification or Exchange of Debt Instruments,
approximately $3.9 million third party fees relating to the senior credit agreement and 8.0% senior notes due 2013
were capitalized at December 31, 2007 and are being amortized over the life of the senior credit facility.
45
Under the terms of our senior credit facility, as amended by the Eleventh Amendment, availability under the
revolving credit facility is subject to the lesser of (i) a borrowing base that is equal to the sum of (a) 80% of eligible
accounts receivable plus (b) 50% of eligible inventory; or (ii) $50.0 million; provided, that the $50.0 million cap is
subject to increase to $75.0 million and then $100.0 million upon satisfaction of certain financial covenant tests.
Borrowings under the senior credit agreement bear interest at a floating rate, which can be either the prime rate or
LIBOR plus the applicable margin to the prime rate and LIBOR borrowings based on our leverage ratio. The senior
credit agreement contains various financial covenants, including, a limitation on the amount of capital expenditures
of not more than $40.0 million in any fiscal year, a minimum ratio of EBITDA to cash interest expense, a fixed
charge coverage ratio and a maximum ratio of total indebtedness to EBITDA. The EBITDA to cash interest expense
ratio, fixed charge coverage ratio and the maximum ratio of total indebtedness to EBITDA for the 12 months then
ended, as measured at the end of each fiscal quarter is set forth below:
Quarter(s) Ending
EBITDA to Cash Interest Expense Ratio
12/31/2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
03/31/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
06/30/2008 and 09/30/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12/31/2008 and each fiscal quarter thereafter . . . . . . . . . . . . . . .
2.50 to 1.00
2.00 to 1.00
2.25 to 1.00
2.50 to 1.00
Quarter(s) Ending
Fixed Charge Coverage Ratio
12/31/2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
03/31/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
06/30/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
09/30/2008, 12/31/2008 and 03/31/2009 . . . . . . . . . . . . . . . . . . . . . . . . .
6/30/2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9/30/2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12/31/2009 and each fiscal quarter thereafter . . . . . . . . . . . . . . . . . . . . . .
1.10 to 1.00
.80 to 1.00
.85 to 1.00
.90 to 1.00
1.00 to 1.00
1.15 to 1.00
1.25 to 1.00
Quarter(s) Ending
Maximum Ratio of Total Indebtedness
12/31/2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
03/31/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
06/30/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
09/30/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12/31/2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
03/31/2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
06/30/2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
09/30/2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12/31/2009 and each fiscal quarter thereafter . . . . . . . . . . . . . . . .
4.75 to 1.00
6.10 to 1.00
5.65 to 1.00
5.15 to 1.00
4.75 to 1.00
4.50 to 1.00
4.00 to 1.00
3.50 to 1.00
3.00 to 1.00
The senior credit agreement also contains covenants restricting certain corporate actions, including asset
dispositions, acquisitions, dividends, change of control, incurring indebtedness, making loans and investments and
transactions with affiliates. If we do not comply with such covenants or satisfy such ratios, our lenders could declare
a default under the senior credit agreement, and our indebtedness thereunder could be declared immediately due and
payable. The senior credit agreement is collateralized by substantially all of our assets and the assets of our
subsidiaries party to the financing, except that the assets of our foreign subsidiaries party to this financing only
secure foreign borrowings. The senior credit agreement also contains customary events of default.
The 8.0% senior notes due 2013 are senior unsecured obligations and rank pari passu in right of payment to all
of our existing and future senior indebtedness and are effectively subordinated to our existing and future secured
obligations. The 8.0% senior notes due 2013 are guaranteed by all of our domestic subsidiaries.
The indenture governing the 8.0% senior notes due 2013 contain covenants that limit, among other things,
additional indebtedness, issuance of preferred stock, dividends, repurchases of capital stock or subordinated
46
indebtedness, investments, liens, restrictions on the ability of our subsidiaries to pay dividends to us, sales of assets,
sale/leaseback transactions, mergers and transactions with affiliates. Upon a change of control, each holder shall
have the right to require that we purchase such holder’s securities at a purchase price in cash equal to 101% of the
principal amount thereof plus accrued and unpaid interest to the date of repurchase. The indenture governing the
8.0% senior notes due 2013 also contains customary events of default.
We believe that cash flow from operating activities together with available borrowings under our senior credit
facility will be sufficient to fund currently anticipated working capital, planned capital spending and debt service
requirements for at least the next twelve months. Capital expenditures for 2008 are expected to be approximately
$20.0 million.
Contractual Obligations and Commercial Commitments
The following table reflects our contractual obligations as of December 31, 2007:
Long-term debt obligations . . . . . . . . . .
Estimated interest payments . . . . . . . . . .
Operating lease obligations . . . . . . . . . .
Pension and other post-retirement
funding . . . . . . . . . . . . . . . . . . . . . . .
FIN 48 obligations. . . . . . . . . . . . . . . . .
Payments Due by Period
Total
Less Than
1 Year
$159,725
43,228
60,210
116
$
12,819
10,227
1-3 Years
(In thousands)
$ 9,608
12,409
15,332
3-5 Years
More Than
5 Years
1
$
12,000
11,462
$150,000
6,000
23,189
37,613
1,026
2,686
1,026
5,966
—
6,958
—
22,003
—
Total . . . . . . . . . . . . . . . . . . . . . . . . .
$301,802
$26,874
$43,315
$30,421
$201,192
The FIN 48 obligations shown in the table above represent uncertain tax positions related to temporary
differences. The years for which the temporary differences related to the uncertain tax positions will reverse have
been estimated in scheduling the obligations within the table. In addition to the Interpretation 48 obligations in the
table above, approximately $1.4 million of unrecognized tax benefits have been recorded as liabilities in accordance
with Interpretation 48, and we are uncertain as to if or when such amounts may be settled. Related to the
unrecognized tax benefits not included in the table above, the Company has also recorded a liability for potential
penalties of $29 thousand and interest of $228 thousand.
Since December 31, 2007, there have been no material changes outside the ordinary course of business to our
contractual obligations as set forth above.
In addition to the obligations noted above, we have obligations reported as other long-term liabilities that
consist primarily of facility closure and consolidation costs, defined benefit plan and other post-retirement benefit
plans and other items. We also enter into agreements with our customers at the beginning of a given platform’s life
to supply products for the entire life of that vehicle platform, which is typically five to seven years. These
agreements generally provide for the supply of a customer’s production requirements for a particular platform,
rather than for the purchase of a specific quantity of products. Accordingly, our obligations under these agreements
are not reflected in the contractual obligations table above.
As of December 31, 2007, we were not party to significant purchase obligations for goods or services.
Off-Balance Sheet Arrangements
We use standby letters of credit to guarantee our performance under various contracts and arrangements,
principally in connection with our workers’ compensation liabilities and for leases on equipment and facilities.
These letter of credit contracts are usually extended on a year-to-year basis. As of December 31, 2007, we had
outstanding letters of credit of $1.8 million. We do not believe that these letters of credit will be required to be
drawn.
We currently have no non-consolidated special purpose entity arrangements.
47
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
Interest Rate Risk
We are exposed to various market risks, including changes in foreign currency exchange rates and interest
rates. Market risk is the potential loss arising from adverse changes in market rates and prices, such as foreign
currency exchange and interest rates. We do not enter into derivatives or other financial instruments for trading or
speculative purposes. We do enter into financial instruments, from time to time, to manage and reduce the impact of
changes in foreign currency exchange rates and interest rates and to hedge a portion of future anticipated currency
transactions. The counterparties are primarily major financial institutions.
We manage our interest rate risk by balancing the amount of our fixed rate and variable rate debt. For fixed rate
debt, interest rate changes affect the fair market value of such debt but do not impact earnings or cash flows.
Conversely for variable rate debt, interest rate changes generally do not affect the fair market value of such debt, but
do impact future earnings and cash flows, assuming other factors are held constant. Approximately $9.5 million and
$11.8 million of our debt was variable rate debt at December 31, 2007 and 2006, respectively. Holding other
variables constant (such as foreign exchange rates and debt levels), a one percentage point change in interest rates
would be expected to have an impact on pre-tax earnings and cash flows for the next year of approximately
$0.1 million and $0.1 million, respectively. The impact on the fair market value of our debt at December 31, 2007
and 2006 would have been insignificant.
Foreign Currency Risk
Foreign currency risk is the risk that we will incur economic losses due to adverse changes in foreign currency
exchange rates. We use forward exchange contracts to hedge foreign currency translation exposures of our United
Kingdom operations. We estimate our projected revenues in certain foreign currencies or locations, and will hedge a
portion or all of the anticipated long or short position. The contracts typically run from three months up to three
years. These contracts are marked-to-market and the fair value is included in assets (liabilities) in our consolidated
balance sheets, with the offsetting noncash gain or loss included in other income or expense on our consolidated
statements of operations. We do not hold or issue foreign exchange options or forward contracts for trading
purposes.
Outstanding foreign currency forward exchange contracts at December 31, 2007 are more fully described in
the notes to our consolidated financial statements in Item 8 of this Annual Report on Form 10-K. The fair value of
these contracts at December 31, 2007 and 2006 amounted to a $1.5 million liability and an $8.5 million asset,
respectively, which is reflected in other long-term liabilities and other assets in our consolidated balance sheets.
None of these contracts have been designated as cash flow hedges; thus, the change in fair value at each reporting
date is reflected as a noncash charge (income) in our consolidated statement of operations. In 2008, we have elected
to designate our future forward exchange contracts as cash flow hedges.
Our primary exposures to foreign currency exchange fluctuations are pound sterling, Eurodollar and Japanese
yen. At December 31, 2007, the potential reduction in earnings from a hypothetical instantaneous 10% adverse
change in quoted foreign currency spot rates applied to foreign currency sensitive instruments is limited by the
assumption that all of the foreign currencies to which we are exposed would simultaneously decrease by 10%
because such synchronized changes are unlikely to occur. The effects of the forward exchange contracts have been
included in the above analysis; however, the sensitivity model does not include the inherent risks associated with the
anticipated future transactions denominated in foreign currency.
Foreign Currency Transactions
A portion of our revenues during the year ended December 31, 2007 were derived from manufacturing
operations outside of the United States. The results of operations and the financial position of our operations in these
other countries are primarily measured in their respective currency and translated into U.S. dollars. A portion of the
expenses generated in these countries is in currencies different from which revenue is generated. As discussed
above, from time to time, we enter into forward exchange contracts to mitigate a portion of this currency risk. The
48
reported income of these operations will be higher or lower depending on a weakening or strengthening of the
U.S. dollar against the respective foreign currency.
A portion of our assets at December 31, 2007 are based in our foreign operations and are translated into
U.S. dollars at foreign currency exchange rates in effect as of the end of each period, with the effect of such
translation reflected as a separate component of stockholders’ investment. Accordingly, our stockholders’ invest-
ment will fluctuate depending upon the weakening or strengthening of the U.S. dollar against the respective foreign
currency.
Effects of Inflation
Inflation potentially affects us in two principal ways. First, a portion of our debt is tied to prevailing short-term
interest rates that may change as a result of inflation rates, translating into changes in interest expense. Second,
general inflation can impact material purchases, labor and other costs. In many cases, we have limited ability to pass
through inflation-related cost increases due to the competitive nature of the markets that we serve. In the past few
years, however, inflation has not been a significant factor.
49
Item 8. Financial Statements and Supplementary Data
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Documents Filed as Part of this Annual Report on Form 10-K
Report of Independent Registered Public Accounting Firm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Consolidated Balance Sheets as of December 31, 2007 and 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Consolidated Statements of Operations for the years ended December 31, 2007, 2006 and 2005 . . . . . . .
Consolidated Statements of Stockholders’ Investment for the years ended December 31, 2007, 2006 and
2005. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Consolidated Statements of Cash Flows for the years ended December 31, 2007, 2006 and 2005 . . . . . .
Notes to Consolidated Financial Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Item 15 — Exhibits and Financial Statement Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
51
52
53
54
55
56
101
50
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of
Commercial Vehicle Group, Inc.
We have audited the accompanying consolidated balance sheets of Commercial Vehicle Group, Inc. and
subsidiaries (the “Company”) as of December 31, 2007 and 2006 and the related consolidated statements of
operations, stockholders’ investment, and cash flows for each of the three years in the period ended December 31,
2007. Our audits also included the financial statement schedules listed in the Index to Item 15. These consolidated
financial statements and financial statement schedules are the responsibility of the Company’s management. Our
responsibility is to express an opinion on the consolidated financial statements and financial statement schedules
based on our audits.
We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board
(United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about
whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a
test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also
includes assessing the accounting principles used and significant estimates made by management, as well as
evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our
opinion.
In our opinion, such consolidated financial statements present fairly, in all material respects, the financial
position of Commercial Vehicle Group, Inc. and subsidiaries as of December 31, 2007 and 2006 and the results of
their operations and their cash flows for each of the three years in the period ended December 31, 2007, in
conformity with accounting principles generally accepted in the United States of America. Also, in our opinion,
such financial statement schedules, when considered in relation to the basic consolidated financial statements taken
as a whole, presents fairly, in all material respects, the information set forth therein.
As discussed in Note 9 to the consolidated financial statements, effective January 1, 2007, the Company
changed the manner in which it accounts for uncertain income tax positions.
As discussed in Notes 2 and 14 to the consolidated financial statements, in 2006, the Company changed its
method of accounting for defined benefit pension and other post-retirement benefit plans and as discussed in Note 13
to the consolidated financial statements, in 2006, the Company changed its method of accounting for share-based
compensation.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board
(United States), the Company’s internal control over financial reporting as of December 31, 2007, based on the
criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Orga-
nizations of the Treadway Commission and our report dated March 13, 2008 expressed an unqualified opinion on
the Company’s internal control over financial reporting.
/s/ Deloitte & Touche LLP
Minneapolis, Minnesota
March 13, 2008
51
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
December 31, 2007 and 2006
2006
2007
(In thousands, except
share and per share
amounts)
CURRENT ASSETS:
ASSETS
Cash and cash equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $
Accounts receivable, net of reserve for doubtful accounts of $3,758 and $5,536,
9,867
$ 19,821
respectively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inventories, net
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prepaid expenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deferred income taxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROPERTY, PLANT AND EQUIPMENT
Land and buildings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machinery and equipment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Construction in progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Less accumulated depreciation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GOODWILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTANGIBLE ASSETS, net of accumulated amortization of $1,687 and $840,
Property, plant and equipment, net
107,687
96,385
16,508
12,989
243,436
32,793
146,448
16,636
(97,619)
98,258
151,189
123,471
88,723
24,272
8,819
265,106
30,203
120,416
17,414
(77,645)
90,388
134,766
respectively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OTHER ASSETS, net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
97,575
8,631
TOTAL ASSETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599,089
84,188
16,374
$590,822
CURRENT LIABILITIES:
LIABILITIES AND STOCKHOLDERS’ INVESTMENT
Current maturities of long-term debt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $
Accounts payable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accrued liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LONG-TERM DEBT, net of current maturities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEFERRED TAX LIABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PENSION AND OTHER POST-RETIREMENT BENEFITS . . . . . . . . . . . . . . . . . . . .
OTHER LONG-TERM LIABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
116
93,033
33,115
126,264
159,609
27,076
18,335
2,470
333,754
$
2,158
86,610
40,970
129,738
159,956
10,611
22,188
3,424
325,917
COMMITMENTS AND CONTINGENCIES (Note 11)
STOCKHOLDERS’ INVESTMENT:
Preferred stock $.01 par value; 5,000,000 shares authorized; no shares issued and
outstanding; common stock $.01 par value; 30,000,000 shares authorized;
21,536,814 and 21,368,831 shares issued and outstanding, respectively . . . . . . . . .
Treasury stock purchased from employees; 28,153 shares and 5,836 shares,
215
214
respectively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional paid-in capital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Retained earnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accumulated other comprehensive loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total stockholders’ investment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(414)
177,421
88,818
(705)
265,335
TOTAL LIABILITIES AND STOCKHOLDERS’ INVESTMENT . . . . . . . . . . $599,089
(115)
174,044
92,007
(1,245)
264,905
$590,822
The accompanying notes are an integral part of these consolidated financial statements.
52
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
Years Ended December 31, 2007, 2006 and 2005
REVENUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COST OF REVENUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gross Profit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SELLING, GENERAL AND ADMINISTRATIVE EXPENSES . . . . . . . .
AMORTIZATION EXPENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RESTRUCTURING COSTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OTHER EXPENSE (INCOME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTEREST EXPENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LOSS ON EARLY EXTINGUISHMENT OF DEBT . . . . . . . . . . . . . . . .
2007
2005
2006
(In thousands, except per share amounts)
$754,481
$918,751
$696,786
620,031
768,913
620,145
76,641
55,493
894
1,433
18,821
9,361
14,147
149
149,838
51,950
414
—
97,474
(3,468)
14,829
318
85,795
27,745
134,450
44,564
358
—
89,528
(3,741)
13,195
1,525
78,549
29,138
(Loss) Income Before Provision for Income Taxes . . . . . . . . . . . . . . . .
(BENEFIT) PROVISION FOR INCOME TAXES . . . . . . . . . . . . . . . . . .
(4,836)
(1,585)
NET (LOSS) INCOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ (3,251)
$ 58,050
$ 49,411
(LOSS) EARNINGS PER COMMON SHARE:
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
$
(0.15)
(0.15)
$
$
2.74
2.69
$
$
2.54
2.51
WEIGHTED AVERAGE SHARES OUTSTANDING:
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21,439
Diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21,439
21,151
21,545
19,440
19,697
The accompanying notes are an integral part of these consolidated financial statements.
53
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ INVESTMENT
Years Ended December 31, 2007, 2006 and 2005
Common Stock
Shares
Amount
Treasury
Stock
Stock
Subscription
Receivable
Additional
Paid-In
Capital
Retained
Earnings
(Accum.
Deficit)
Deferred
Comp.
Accum.
Other
Comp.
Income /
(Loss)
Total
BALANCE — December 31, 2005 . . . . . . . 21,145,954
$211
$ —
$ —
$172,514
$ 33,957
$(3,262)
$(1,343)
BALANCE — December 31, 2004 . . . . . . . 17,987,497
2,671,229
Issuance of common stock . . . . . . . . . .
Exercise of common stock under stock
option and equity incentive plans . . . . .
Issuance of restricted stock . . . . . . . . . .
Stock subscriptions received . . . . . . . . .
Comprehensive income:
Net income . . . . . . . . . . . . . . . . . .
Foreign currency translation
adjustment . . . . . . . . . . . . . . . . .
Minimum pension liability adjustment,
net of tax . . . . . . . . . . . . . . . . . .
Total comprehensive income . . . . . . . . .
Exercise of common stock under stock
option and equity incentive plans . . . . .
Issuance of restricted stock . . . . . . . . . .
Effect of accounting change —
SFAS 123(R) . . . . . . . . . . . . . . . . .
Treasury stock purchased from employees
at cost . . . . . . . . . . . . . . . . . . . . .
Share-based compensation expense . . . . .
Excess tax benefit — equity transactions . .
Comprehensive income:
Net income . . . . . . . . . . . . . . . . . .
Foreign currency translation
adjustment . . . . . . . . . . . . . . . . .
Minimum pension liability adjustment,
net of tax . . . . . . . . . . . . . . . . . .
Total comprehensive income . . . . . . . . .
Adjustment to initially apply FASB
Exercise of common stock under stock
option and equity incentive plans . . . . .
Issuance of restricted stock . . . . . . . . . .
Treasury stock purchased from employees
at cost . . . . . . . . . . . . . . . . . . . . .
Share-based compensation expense . . . . .
Excess tax benefit — equity transactions . .
Comprehensive income:
Net income . . . . . . . . . . . . . . . . . .
Foreign currency translation
adjustment . . . . . . . . . . . . . . . . .
Minimum pension liability adjustment,
net of tax . . . . . . . . . . . . . . . . . .
Derivative instruments . . . . . . . . . . .
Total comprehensive income . . . . . . . . .
Adjustment to initially apply FIN 48, net
$180
26
$ —
—
(In thousands, except share data)
$(175)
—
$123,660
43,710
$(15,454)
—
$ — $ 2,835
—
—
$111,046
43,736
319,928
167,300
—
—
—
—
3
2
—
—
—
—
—
—
—
—
—
—
—
—
175
—
—
—
1,882
3,262
—
—
—
—
—
—
—
—
(3,262)
—
49,411
—
—
—
—
—
—
—
—
—
1,885
2
175
49,411
(3,645)
(3,645)
(533)
341,685
54,328
(167,300)
(5,836)
—
—
—
—
—
68,778
121,522
(22,317)
—
—
—
—
—
—
4
1
(2)
—
—
—
—
—
—
—
$214
—
1
—
—
—
—
—
—
—
—
—
—
(115)
—
—
—
—
—
—
$(115)
—
—
(299)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2,141
—
(3,262)
—
2,006
645
—
—
—
—
—
—
—
—
—
58,050
—
—
—
—
3,262
—
—
—
—
—
—
(533)
45,233
$202,077
2,145
1
(2)
(115)
2,006
645
58,050
—
—
—
—
—
—
—
3,874
3,874
(304)
(304)
61,620
—
$ —
—
$174,044
—
$ 92,007
—
(3,472)
$ — $(1,245)
(3,472)
$264,905
—
—
—
—
—
—
—
—
—
463
—
—
3,084
(170)
—
—
—
—
—
—
—
—
—
(3,251)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(589)
1,296
(167)
463
1
(299)
3,084
(170)
(3,251)
(589)
1,296
(167)
(2,711)
Statement No. 158, net of tax . . . . . . .
—
BALANCE — December 31, 2006 . . . . . . . 21,368,831
of tax . . . . . . . . . . . . . . . . . . . . .
—
BALANCE — December 31, 2007 . . . . . . . 21,536,814
—
$215
—
$(414)
—
$ —
—
$177,421
62
$ 88,818
—
—
$ — $ (705)
62
$265,335
The accompanying notes are an integral part of these consolidated financial statements.
54
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
Years Ended December 31, 2007, 2006 and 2005
2007
2006
(In thousands)
2005
CASH FLOWS FROM OPERATING ACTIVITIES:
Net (loss) income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ (3,251)
Adjustments to reconcile net (loss) income to net cash provided by operating
$ 58,050
$ 49,411
activities:
Depreciation and amortization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Noncash amortization of debt financing costs . . . . . . . . . . . . . . . . . . . . . . . . .
Loss on early extinguishment of debt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shared-based compensation expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gain on sale of assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pension and other post-retirement curtailment gain . . . . . . . . . . . . . . . . . . . . .
Deferred income tax provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Noncash loss (gain) on forward exchange contracts . . . . . . . . . . . . . . . . . . . .
Change in other operating items:
Accounts receivable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inventories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prepaid expenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accounts payable and accrued liabilities . . . . . . . . . . . . . . . . . . . . . . . . . .
Other assets and liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash provided by operating activities . . . . . . . . . . . . . . . . . . . . . . . .
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of property, plant and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proceeds from disposal/sale of property plant and equipment. . . . . . . . . . . . . . . .
Proceeds from disposal/sale of other assets . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Post-acquisition and acquistion payments, net of cash received . . . . . . . . . . . . . .
Other assets and liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash (used in) investing activities . . . . . . . . . . . . . . . . . . . . . . . . . . .
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from issuance of common stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proceeds from issuance of common stock under equity incentive plans . . . . . . . . .
Purchases of treasury stock from employees . . . . . . . . . . . . . . . . . . . . . . . . . . .
Excess tax benefit from equity incentive plans . . . . . . . . . . . . . . . . . . . . . . . . . .
Repayment of revolving credit facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Borrowings under revolving credit facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repayments of long-term borrowings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Long-term borrowings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proceeds from issuance of 8% senior notes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Payments on capital lease obligations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Debt issuance costs and other, net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash (used in) provided by financing activities . . . . . . . . . . . . . . . . .
EFFECT OF CURRENCY EXCHANGE RATE CHANGES ON CASH AND CASH
EQUIVALENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NET (DECREASE) INCREASE IN CASH AND CASH EQUIVALENTS . . . . . . . .
CASH AND CASH EQUIVALENTS:
16,425
859
149
3,084
(10)
—
9,691
9,967
28,347
3,809
3,071
(24,830)
264
47,575
(16,981)
549
—
(36,049)
(811)
(53,292)
—
464
(299)
(170)
(129,490)
137,521
(10,295)
—
—
(125)
—
(2,394)
14,983
895
318
2,006
(665)
(3,865)
9,417
(4,203)
(4,369)
(16,603)
(21,819)
2,213
564
36,922
(19,327)
352
2,032
(9,452)
(1,230)
(27,625)
—
2,140
(115)
645
(74,711)
72,398
(28,210)
—
—
(99)
—
(27,952)
12,064
848
1,525
—
(7)
(3,097)
7,248
(3,793)
(22,013)
(11,571)
9,958
10,145
(6,562)
44,156
(15,957)
—
—
(170,851)
(1,761)
(188,569)
43,914
1,887
—
—
(207,449)
206,778
(238,336)
227,459
150,000
(46)
4,340
188,547
(1,843)
(9,954)
(2,165)
(20,820)
(4,889)
39,245
Beginning of period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End of period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $
19,821
9,867
40,641
$ 19,821
1,396
$ 40,641
SUPPLEMENTAL CASH FLOW INFORMATION:
Cash paid for interest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13,185
$ 13,869
$
6,340
Cash (received) paid for income taxes, net
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ (10,807)
$ 29,197
$ 24,603
Unpaid purchases of property and equipment included in accounts payable . . . . . . $
293
$ 3,062
$
4,712
The accompanying notes are an integral part of these consolidated financial statements.
55
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Years Ended December 31, 2007, 2006 and 2005
1. Organization
Commercial Vehicle Group, Inc. and its subsidiaries (“CVG” or the “Company”) design and manufacture seat
systems, interior trim systems (including instrument and door panels, headliners, cabinetry, molded products and
floor systems), cab structures and components, mirrors, wiper systems, electronic wiring harness assemblies and
controls and switches for the global commercial vehicle market, including the heavy-duty truck market, the
construction, military, bus, agriculture and specialty transportation markets. We have facilities located in the United
States in Arizona, Indiana, Illinois, Iowa, North Carolina, Ohio, Oregon, Tennessee, Virginia and Washington and
outside of the United States in Australia, Belgium, China, Czech Republic, Mexico, Sweden, Ukraine and the
United Kingdom.
2. Significant Accounting Policies
Principles of Consolidation — The accompanying consolidated financial statements include the accounts of
our wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in
consolidation.
Use of Estimates — The preparation of financial statements in conformity with accounting principles
generally accepted in the United States of America (“U.S. GAAP”) requires management to make estimates
and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and
liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the
reporting period. Actual results may differ materially from those estimates.
Cash and Cash Equivalents — Cash and cash equivalents consist of highly liquid investments with an original
maturity of three months or less. Cash equivalents are stated at cost, which approximates fair value.
Accounts Receivable — Trade accounts receivable are stated at current value less an allowance for doubtful
accounts, which approximates fair value. This estimated allowance is based primarily on management’s evaluation
of specific balances as the balances become past due, the financial condition of our customers and our historical
experience of write-offs. If not reserved through specific identification procedures, our general policy for
uncollectible accounts is to reserve at a certain percentage threshold, based upon the aging categories of accounts
receivable. Past due status is based upon the due date of the original amounts outstanding. When items are
ultimately deemed uncollectible, they are charged off against the reserve previously established in the allowance for
doubtful accounts.
Inventories — We maintain our inventory primarily for the manufacture of goods for sale to our customers.
Inventory is composed of three categories: Raw Materials, Work in Process, and Finished Goods. These categories
are generally defined as follows: Raw Materials consist of materials that have been acquired and are available for
the production cycle; Work in Process is composed of materials that have been moved into the production process
and have some measurable amount of labor and overhead added; Finished Goods are materials with added labor and
overhead that have completed the production cycle and are awaiting sale and delivery to customers.
Inventories are valued at the lower of first-in, first-out (“FIFO”) cost or market. Cost includes applicable
material, labor and overhead. We value our finished goods inventory at a standard cost that is periodically adjusted
to approximate actual cost. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions
for excess and obsolete inventory are recorded based primarily on our estimated production requirements driven by
current market volumes. Excess and obsolete provisions may vary by product depending upon future potential use
of the product.
56
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Property, Plant and Equipment — Property, plant and equipment are stated at cost, net of accumulated
depreciation. For financial reporting purposes, depreciation is computed using the straight-line method over the
following estimated useful lives:
Buildings and improvements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machinery and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tools and dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Computer hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15 to 40 years
3 to 20 years
5 years
3 years
Expenditures for maintenance and repairs are charged to expense as incurred. Expenditures for major
betterments and renewals that extend the useful lives of property, plant and equipment are capitalized and
depreciated over the remaining useful lives of the asset. When assets are retired or sold, the cost and related
accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in the results
of operations. Leasehold improvements are amortized using the straight-line method over the estimated useful lives
of the improvements or the term of the lease, whichever is shorter. Accelerated depreciation methods are used for
tax reporting purposes.
We follow the provisions of SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets,
which provides a single accounting model for impairment of long-lived assets. We had no impairments during 2007,
2006, or 2005.
Intangible Assets — Indefinite-Lived
Basis for Accounting Treatment
Our indefinite-lived intangible assets consist of customer relationships acquired in the 2005 acquisitions of
Mayflower and Monona. We have accounted for these customer relationships as indefinite-lived intangible assets,
which we believe is appropriate based upon the following circumstances and conditions under which we operate:
Sourcing, Barriers to Entry and Competitor Risks
The customer sourcing decision for the Mayflower and Monona businesses is heavily predicated on price,
quality, delivery and the overall customer relationship. Absent a significant change in any or all of these factors, it is
unlikely that a customer would source production to an alternate supplier. In addition, the factors listed below
impose a high barrier for new competitors to enter into this industry. Historical experience indicates that Mayflower
and Monona have not lost any primary customers and/or relationships due to these factors and such loss is not
anticipated in the foreseeable future for the following reasons:
(cid:129) Costs associated with setting up a new production line, including tooling costs, are typically cost prohibitive
in a competitive pricing environment;
(cid:129) The risk associated with potential production delays and a disruption to the supply chain typically outweighs
any potential economic benefit;
(cid:129) Significant initial outlays of capital and institutional production knowledge represent a significant barrier to
entry. Due to the asset-intensive nature of the businesses, a new competitor would require a substantial
amount of initial capital;
(cid:129) Changeover costs are high both from an economic and risk standpoint;
(cid:129) The highly complex nature of successfully producing electronic wiring harnesses and complete cab
structures in accordance with OEM quality standards makes it difficult for a competitor to enter the
business; and
57
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
(cid:129) There is significant risk in operating the businesses as a result of the highly customized nature of the
business. For example, production runs in the commercial vehicle business are significantly smaller and are
more “build to order” in nature which requires the systems, expertise, equipment and logistics in order to be
successful.
These costs and risks are the primary prohibiting factors which preclude our customers from sourcing their
business elsewhere at any given time.
Duration and Strength of Existing Customer Relationships/Concentrations of Revenue
Mayflower and Monona have long-standing relationships with their existing customers and have experienced
de minimis historical attrition. These relationships have endured over time and, accordingly, an assumption of
prospective attrition is inconsistent with this historical experience and management’s expectations. Both May-
flower and Monona have a limited customer base, consisting of three primary customers, that has existed for many
years, and we had pre-existing long-standing relationships with the same primary customers prior to the acqui-
sitions of Mayflower and Monona, which in most cases have exceeded a period of 40 years. We believe the addition
of Mayflower and Monona further strengthens our existing customer relationships with such customers.
Specifically:
Mayflower and Monona’s relationships with their customers’ key decision-making personnel are mature and
stable.
(cid:129) Mayflower’s and Monona’s customers typically make purchasing decisions through a team approach versus
a single decision maker. Mayflower and Monona have historically maintained strong relationships with
individuals at all levels of the decision making process including the engineering, operations and purchasing
functions in order to successfully minimize the impact of any employee turnover at the customer level.
The top three customers of Mayflower and Monona have been established customers for a substantial period of
time.
(cid:129) Mayflower has had relationships with Volvo/Mack, Freightliner and International since 1965, 1997 and
2001, respectively. We and/or our predecessor entities, had pre-existing relationships with these same
customers since 1949, 1954 and 1950, respectively. These customers comprised approximately 89%, 88%
and 85% of Mayflower’s revenues for fiscal years 2007, 2006 and 2005, respectively.
(cid:129) Monona has had relationships with Deere & Co., Caterpillar and Oshkosh since 1969, 1970 and 1985,
respectively. We and/or our predecessor entities, had pre-existing relationships with these same customers
since 1987, 1958 and 1950, respectively. These customers comprised approximately 84%, 85% and 88% of
Monona’s revenues for fiscal years 2007, 2006 and 2005, respectively.
Valuation Methodology
For valuation purposes, the income approach using the discounted cash flow method was employed for the
purpose of evaluating the Mayflower and Monona customer relationship intangible assets. Under this approach, we
determined that the fair value of the Mayflower and Monona customer relationship intangible assets at their dates of
acquisition was $45.9 million and $28.9 million, respectively.
Significant assumptions used in the valuation and determination of an indefinite useful life for these customer
relationship intangible assets included the following:
(cid:129) The revenue projections that we relied upon to substantiate the economic consideration paid for the
businesses is almost exclusively tied to the existing customer base. With regard to the valuation process, we
projected less than 1% of total revenue in 2005 and 2006 to be lost due to core customer attrition and no core
customer attrition thereafter.
58
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
(cid:129) Contributory asset charges were deducted for assets that contribute to income generation including: (i) net
working capital; (ii) personal property; (iii) real property; (iv) tradename and trademarks; and (v) an
assembled workforce.
(cid:129) The cash flows associated with the customer relationships acquired in the Mayflower and Monona
transactions were discounted at a rate of return of 25.0% and 29.5%, respectively, which is approximately
equal to the equity rate of return.
Intangible Asset Impairment — Accounting Treatment
If Mayflower and/or Monona were to prospectively lose any of their customers, in accordance with the
provisions of paragraphs 16 and 17 of SFAS No. 142, Goodwill and Other Intangible Assets, we would perform an
intangible asset impairment test to determine the impact of the loss on the customer relationship intangible asset and
if impairment was indicated, we would record an impairment loss in our consolidated statement of operations.
Other Assets — Other assets primarily consist of long-term supply contracts of approximately $3.8 million at
December 31, 2007 and approximately $3.0 million at December 31, 2006, fair value of foreign exchange contracts
of approximately $0.0 million in 2007 and approximately $8.5 million in 2006 and debt financing costs of
approximately $3.9 million at December 31, 2007 and approximately $4.8 million at December 31, 2006, which are
being amortized over the term of the related obligations.
Revenue Recognition — Product revenue is derived from sales of our various manufactured products. Our
revenue recognition policy is in accordance with the SEC’s SAB No. 101, Revenue Recognition in Financial
Statements, SAB No. 104, Revenue Recognition, and other authoritative accounting literature. In accordance with
the provisions of such authoritative accounting literature, we recognize revenue when 1) delivery has occurred or
services have been rendered, 2) persuasive evidence of an arrangement exists, 3) there is a fixed or determinable
price, and 4) collectibility is reasonably assured. Our products are generally shipped from our facilities to our
customers, which is when title passes to the customer for substantially all of our revenues.
Provisions for anticipated contract losses are recognized at the time they become evident. In that regard, in
certain instances, we may be committed under existing agreements to supply product to our customers at selling
prices that are not sufficient to cover the cost to produce such product. In such situations, we record a provision for
the estimated future amount of such losses. Such losses are recognized at the time that the loss is probable and
reasonably estimable and are recorded at the minimum amount necessary to fulfill our obligations to our customers.
We had approximately $0.4 million as of December 31, 2007 and no such provision as of December 31, 2006. These
amounts, as they relate to the year ended December 31, 2007 are included within accrued liabilities and other long-
term liabilities in the accompanying consolidated balance sheets.
Warranty — We are subject to warranty claims for products that fail to perform as expected due to design or
manufacturing deficiencies. Customers continue to require their outside suppliers to guarantee or warrant their
products and bear the cost of repair or replacement of such products. Depending on the terms under which we
supply products to our customers, a customer may hold us responsible for some or all of the repair or replacement
costs of defective products, when the product supplied did not perform as represented. Our policy is to record
provisions for estimated future customer warranty costs based on historical trends and current economic factors.
These amounts, as they relate to the years ended December 31, 2007 and 2006 are included within accrued expenses
59
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
in the accompanying consolidated balance sheets. The following presents a summary of the warranty provision for
the years ended December 31 (in thousands):
Balance — Beginning of the year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5,197
269
2,155
(3,691)
28
Increase due to acquisitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional provisions recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deduction for payments made . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Currency translation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 7,117
12
3,391
(5,366)
43
Balance — End of year. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3,958
$ 5,197
2007
2006
Income Taxes — We account for income taxes following the provisions of SFAS No. 109, Accounting for
Income Taxes, which requires recognition of deferred tax assets and liabilities for the expected future tax
consequences of events that have been included in our financial statements or tax returns. Under this method,
deferred tax assets and liabilities are determined based on the difference between the financial statement and tax
basis of assets and liabilities using enacted tax laws and rates. In July 2006, the FASB issued FIN 48, Accounting for
Uncertainty in Income Taxes — an interpretation of SFAS 109. FIN 48 prescribes a comprehensive model for how
companies should recognize, measure, present, and disclose in their financial statements, uncertain tax positions
taken or expected to be taken on a tax return. Under FIN 48, tax positions shall initially be recognized in the
financial statements when it is more likely than not the position will be sustained upon examination by the tax
authorities. Such tax positions shall initially and subsequently be measured as the largest amount of tax benefit that
is greater than 50% likely of being realized upon ultimate settlement with the tax authority assuming full knowledge
of the position and all relevant facts. FIN 48 also revises disclosure requirements to include an annual tabular
rollforward of unrecognized tax benefits. The provisions of this interpretation are required to be adopted for fiscal
periods beginning after December 15, 2006. We adopted the provisions of FIN 48 on January 1, 2007, and as a
result, recognized approximately $62 thousand decrease in the liability for unrecognized tax benefits, which was
accounted for as an increase to the January 1, 2007 balance of retained earnings.
Comprehensive (Loss) — We follow the provisions of SFAS No. 130, Reporting Comprehensive Income,
which established standards for reporting and display of comprehensive income and its components. Compre-
hensive income reflects the change in equity of a business enterprise during a period from transactions and other
events and circumstances from non-owner sources. Comprehensive (loss) represents net income adjusted for
foreign currency translation adjustments, minimum pension liability and the deferred gain (loss) on certain
derivative instruments utilized to hedge certain of our interest rate exposures. In accordance with SFAS No. 130, we
have chosen to disclose comprehensive (loss) in the consolidated statements of stockholders’ investment. The
components of accumulated other comprehensive (loss) consisted of the following as of December 31 (in
thousands):
Foreign currency translation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4,868
(5,406)
Pension liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(167)
Unrealized loss on derivative instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 5,457
(6,702)
—
2007
2006
$ (705)
$(1,245)
Fair Value of Financial Instruments — At December 31, 2007, our financial instruments consist of cash and
cash equivalents, accounts receivable, accounts payable, accrued liabilities and long-term debt, unless otherwise
noted. The carrying value of these instruments approximates fair value as a result of the short duration of such
instruments or due to the variability of the interest cost associated with such instruments.
60
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Concentrations of Credit Risk — Financial instruments that potentially subject us to concentrations of credit
risk consist primarily of cash, cash equivalents and accounts receivable. We place our cash equivalents with high
credit-quality financial institutions. We sell products to various companies throughout the world in the ordinary
course of business. We routinely assess the financial strength of our customers and maintain allowances for
anticipated losses. Customers that accounted for a significant portion of consolidated revenues for each of the three
years ended December 31 were as follows:
2007
2006
2005
PACCAR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caterpillar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freightliner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Volvo/Mack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14% 17% 17%
22
11
8
11
13
11
13
11
19
7
16
14
As of December 31, 2007 and 2006, receivables from these customers represented approximately 50% and
67% of total receivables, respectively.
Foreign Currency Translation — Our functional currency is the local currency. Accordingly, all assets and
liabilities of our foreign subsidiaries are translated using exchange rates in effect at the end of the period and
revenue and costs are translated using average exchange rates for the period. The related translation adjustments are
reported in accumulated other comprehensive income in stockholders’ investment. Translation gains and losses
arising from transactions denominated in a currency other than the functional currency of the entity involved are
included in the results of operations.
Foreign Currency Forward Exchange Contracts — We use forward exchange contracts to hedge certain of our
foreign currency transaction exposures of our United Kingdom operations. We estimate our projected revenues in
certain foreign currencies or locations, and will hedge a portion or all of the anticipated long or short position. The
contract duration is typically between three months and three years. These contracts are marked-to-market and the
fair value is included in assets or liabilities in the accompanying consolidated balance sheets, with the offsetting
noncash gain or loss included other income and expense on our accompanying consolidated statements of
operations. We do not hold or issue foreign exchange options or forward contracts for trading purposes. The
following table summarizes the notional amount of our open foreign exchange contracts at December 31, 2007 (in
thousands):
Local
Currency
Amount
U.S. $
Equivalent
U.S. $
Equivalent
Fair Value
Commitments to sell currencies:
U.S. Dollar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Eurodollar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Swedish krona. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Japanese yen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Australian Dollar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(598)
49,336
13,900
3,150,200
5,350
$ (598)
69,329
2,093
32,114
4,502
$ (598)
72,797
2,190
29,948
4,616
The difference between the U.S. $ equivalent and U.S. $ equivalent fair value of approximately $1.5 million
liability and $8.5 million asset is included in other long-term liabilities and other assets in the consolidated balance
sheet at December 31, 2007 and 2006, respectively.
Recently Issued Accounting Pronouncements — In July 2006, the FASB issued FIN 48, an interpretation of
SFAS 109. FIN 48 prescribes a comprehensive model for how companies should recognize, measure, present, and
disclose in their financial statements, uncertain tax positions taken or expected to be taken on a tax return. Under
FIN 48, tax positions shall initially be recognized in the financial statements when it is more likely than not the
61
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
position will be sustained upon examination by the tax authorities. Such tax positions shall initially and subse-
quently be measured as the largest amount of tax benefit that is greater than 50% likely of being realized upon
ultimate settlement with the tax authority assuming full knowledge of the position and all relevant facts. FIN 48 also
revises disclosure requirements to include an annual tabular rollforward of unrecognized tax benefits. The
provisions of this interpretation are required to be adopted for fiscal periods beginning after December 15,
2006. We adopted the provisions of FIN 48 on January 1, 2007, and as a result, recognized approximately $62
thousand decrease in the liability for unrecognized tax benefits, which was accounted for as an increase to the
January 1, 2007 balance of retained earnings.
In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements. SFAS No. 157 establishes a
common definition for fair value to be applied to U.S. GAAP guidance requiring use of fair value, establishes a
framework for measuring fair value, and expands disclosure about such fair value measurements. SFAS No. 157 is
effective for fiscal years beginning after November 15, 2007. We are currently evaluating the impact, if any, of
adopting the provisions of SFAS No. 157 on our consolidated financial position and results of operations.
In September 2006, the FASB issued SFAS No. 158, Employers’ Accounting for Defined Benefit Pension and
Other Postretirement Plans — an amendment of FASB Statements No. 87, 88, 106, and 132(R). SFAS No. 158
requires an employer to recognize the funded status of defined benefit pension and other post-retirement benefit
plans as an asset or liability in our consolidated balance sheets and to recognize changes in that funded status in the
year in which the changes occur through accumulated other comprehensive income in stockholders’ investment.
SFAS No. 158 also requires that, beginning in 2008, our assumptions used to measure our annual defined benefit
pension and other post-retirement benefit plans be determined as of the balance sheet date, and all plan assets and
liabilities be reported as of that date. Currently, the assumptions used to measure our annual defined benefit pension
and other post-retirement benefit plan expenses are determined as of October 1 or December 31 (measurement
dates) for our various plans, and all plan assets and liabilities are generally reported as of those dates. We are
currently assessing the impact of the measurement date change of SFAS 158 on our consolidated financial positions
and results of operations.
In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial
Liabilities. SFAS No. 159, which amends SFAS No. 115, Accounting for Certain Investments in Debt and Equity
Securities, allows certain financial assets and liabilities to be recognized, at our election, at fair market value, with
any gains or losses for the period recorded in the statement of income. SFAS No. 159 is effective for fiscal years
beginning after November 15, 2007. We are currently assessing the impact of SFAS 159 on our consolidated
financial positions and results of operations.
In December 2007, the FASB issued SFAS No. 141(R), Business Combinations, and SFAS No. 160, Non-
controlling Interests in Consolidated Finance Statements, an amendment of ARB No. 51. SFAS No. 141(R) will
change how business acquisitions are accounted for and will impact financial statements both on the acquisition
date and in subsequent periods. SFAS No. 160 will change the accounting and reporting for minority interests,
which will be recharacterized as noncontrolling interests and classified as a component of equity. Early adoption is
prohibited for both standards. The provisions of SFAS No. 141(R) and SFAS No. 160 are effective for our 2009
fiscal year beginning January 1, 2009, and are to be applied prospectively.
3. Business Combinations
In October 2007, we acquired all of the outstanding common stock of PEKM Kabeltechnik s.r.o. (“PEKM”),
an electronic wire harness manufacturer primarily for the commercial truck market, with facilities in the Czech
Republic and the Ukraine for approximately $21.2 million in cash. The acquisition was financed with borrowings
from our revolving credit facility. The operating results of PEKM have been included in our 2007 consolidated
financial statements since the date of acquisition. From the date of acquisition through December 31, 2007 PEKM
recorded revenues of approximately $15.5 million and an operating loss of approximately $0.1 million.
62
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
In October 2007, we acquired the heavy-gauge thermoforming and injection molding assets of the Fabrication
Division of Gage Industries, Inc. (“Gage”) for approximately $5.5 million in cash. The acquisition was financed
with borrowings from our revolving credit facility. The operating results of Gage have been included in our 2007
consolidated financial statements since the date of acquisition. From the date of acquisition through December 31,
2007 Gage recorded revenues of approximately $1.9 million and an operating loss of approximately $0.3 million.
In December 2007, we acquired substantially all of the assets of Short Bark Industries, LLC (“SBI”), a supplier
of seat covers and various cut-and-sew trim products, for approximately $3.6 million in cash and approximately
$2.3 million of net liabilities due to us. The acquisition was financed with borrowings from our revolving credit
facility. The operating results of SBI have been included in our 2007 consolidated financial statements since the date
of acquisition. From the date of acquisition through December 31, 2007 SBI recorded revenues of approximately
$0.0 million and an operating loss of approximately $0.1 million.
On a pro forma basis had the PEKM, Gage and SBI acquisitions been included in our consolidated financial
statement for the full year 2007, our revenues would have increased by approximately $57.2 million and operating
income would have increased by approximately $1.3 million, as shown in the following table (in thousands):
PEKM
Gage
SBI
Total
Revenue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,147
640
Operating Income (Loss) . . . . . . . . . . . . . . . . . . . . . . . . $
$13,082
$ (409)
$4,940
$1,021
$57,169
$ 1,252
The PEKM, Gage and SBI acquisitions were accounted for by the purchase method of accounting. Under
purchase accounting, the preliminary purchase price is allocated to the tangible and intangible assets and liabilities
of the Company based upon their respective fair values. We continue to evaluate the purchase price allocation,
including intangible assets, contingent liabilities and property, plant and equipment, and expect to revise the
purchase price allocation as better information becomes available. The preliminary purchase price and costs
associated with the acquisitions exceeded the preliminary fair value of the net assets acquired by approximately
$26.9 million. Our valuation of goodwill as of December 31, 2007 is as follows (in thousands):
PEKM
Gage
SBI
Total
Contract purchase price . . . . . . . . . . . . . . . . . . . . . . . . .
Working capital and other adjustments . . . . . . . . . . . . . .
$25,760
(4,522)
$ 5,500
—
$ 3,626
2,297
$34,886
(2,225)
Preliminary purchase price (cash consideration) . . . . . . .
Transaction costs and other adjustments . . . . . . . . . . . . .
Net assets at historical cost . . . . . . . . . . . . . . . . . . . . . .
21,238
(896)
(2,293)
5,500
(20)
(4,168)
5,923
(1,005)
2,666
32,661
(1,921)
(3,795)
Excess of purchase price over net assets acquired . . . . . .
$18,049
$ 1,312
$ 7,584
$26,945
63
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Under the purchase method of accounting in accordance with SFAS No. 141, Business Combinations, the
preliminary purchase price as shown above is allocated to tangible and intangible assets and liabilities based on their
estimated fair values as of the date of the acquisition. The preliminary purchase price allocation as of December 31,
2007 was as follows (in thousands):
PEKM
Gage
SBI
Total
Cash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accounts receivable . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inventories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other current assets . . . . . . . . . . . . . . . . . . . . . . . . . . .
Property, plant and equipment, net . . . . . . . . . . . . . . . .
Goodwill and other intangibles . . . . . . . . . . . . . . . . . . .
Current liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other long-term liabilities . . . . . . . . . . . . . . . . . . . . . . .
$ 2,519
7,781
7,180
596
3,480
18,049
(13,482)
(2,366)
$ — $
—
2,070
144
2,098
1,312
(124)
—
32
279
537
77
799
7,584
(3,353)
—
Net assets acquired . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Less: Cash received . . . . . . . . . . . . . . . . . . . . . . . . . . .
23,757
(2,519)
5,500
—
5,955
(32)
$ 2,551
8,060
9,787
817
6,377
26,945
(16,959)
(2,366)
35,212
(2,551)
Contract purchase price . . . . . . . . . . . . . . . . . . . . . . . .
$ 21,238
$5,500
$ 5,923
$ 32,661
The following pro forma information presents the result of operations as if the 2007 acquisitions of PEKM,
Gage and SBI and the 2006 acquisition of C.I.E.B. had taken place at the beginning of each period presented below.
The pro forma results are not necessarily indicative of the financial position or result of operations had the
acquisitions taken place on the dates indicated. In addition, the pro forma results are not necessarily indicative of the
future financial or operating results.
2007
(Unaudited)
2006
(Unaudited)
(In thousands, except per
share data)
Revenue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Earnings Per Share:
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$753,955
$ 20,967
$ (4,042)
$1,006,114
$ 102,502
57,945
$
$
$
(0.19)
(0.19)
$
$
2.74
2.69
4.
Inventories, net
Inventories consisted of the following as of December 31 (in thousands):
Raw materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Work in process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finished goods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Less: excess and obsolete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$62,129
19,811
19,862
(5,417)
$61,617
14,436
17,314
(4,644)
2007
2006
$96,385
$88,723
64
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
5. Accrued Liabilities
Accrued liabilities consisted of the following as of December 31 (in thousands):
2007
2006
Compensation and benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Legal/professional fees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Income and other taxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Facility closure and consolidation costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$11,389
6,039
3,958
3,099
728
646
7,256
$16,021
6,104
5,197
2,495
883
—
10,270
$33,115
$40,970
6. Restructuring and Integration
Restructuring — In 2007, our Board of Directors approved the closing of our Seattle, Washington facility and
transfer of operations to existing plants throughout the United States in order to improve customer service and
strengthen our long-term competitive position. The decision to close the Seattle facility and redistribute the work
was the result of a long-term analysis of changing market requirements, including the consolidation of product lines
and closer proximity to customer operations. The closure was substantially completed as of December 31, 2007. We
estimate that we will record in accordance with SFAS No. 146, Accounting for Costs Associated with Exit or
Disposal Activities, total charges of approximately $2.4 million, consisting of employee related costs of approx-
imately $1.1 million, non-cash expense related to the write-down of certain assets of approximately $0.4 million
and facility exit and other contractual costs of approximately $0.9 million. The Company has incurred costs of
approximately $1.4 million in the twelve months ended December 31, 2007 consisting of approximately $0.8
million employee related costs, $0.5 million of facility exit and other contractual costs and $0.1 million in noncash
expense related to the write-down of certain assets. We estimate that approximately $1.4 million of the total charges
will be incurred as future cash expenditures.
A summary of these restructuring activities for the years ended December 31, 2007 and 2006 is as follows (in
thousands):
Balance — December 31, 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Provisions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Employee
Costs
$ —
810
(164)
Balance — December 31, 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 646
Facility Exit
and Other
Contractual
Costs
$—
—
—
$—
Total
$ —
810
(164)
$ 646
Integration — In connection with the acquisitions of Bostrom plc and the predecessor to CVS, facility
consolidation plans were designed and implemented to reduce the cost structure and to better integrate the acquired
operations. Purchase liabilities recorded as part of the acquisitions included approximately $3.3 million for costs
associated with the shutdown and consolidation of certain acquired facilities and severance and other contractual
costs. At December 31, 2007, we had principally completed our actions under these plans, other than certain
65
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
contractual commitments, which continue through 2008. Summarized below is the activity related to these actions
(in thousands):
Employee
Costs
Facility Exit
and Other
Contractual Costs
Balance — December 31, 2005 . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balance — December 31, 2006 . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$—
—
—
—
Balance — December 31, 2007 . . . . . . . . . . . . . . . . . . . . . . .
$—
$ 317
(70)
247
(141)
$ 106
Total
$ 317
(70)
247
(141)
$ 106
In connection with the June 8, 2005 acquisition of Monona, plans were established to realign certain operations
in an effort to achieve synergies between us and Monona, including the closure of our Spring Green, Wisconsin
operations and the administrative office located in Naperville, Illinois. Purchase liabilities recorded as part of the
acquisition include approximately $0.9 million related to employee severance and associated benefits for approx-
imately 100 employees and approximately $1.1 million related to facility exit, transition and other estimated costs.
These activities were completed as of December 31, 2007. Summarized below is the activity related to these actions
(in thousands):
Employee
Costs
Facility Exit
and Other
Contractual Costs
Balance — December 31, 2005 . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balance — December 31, 2006 . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 946
(886)
$ 60
(60)
Balance — December 31, 2007 . . . . . . . . . . . . . . . . . . . . . .
$ —
$ 1,067
(1,067)
$ —
—
$ —
Total
$ 2,013
(1,953)
$
60
(60)
$ —
7. Debt
Debt consisted of the following at December 31 (in thousands):
Revolving credit facilities bore interest at a weighted average of 8.5% as of
December 31, 2007 and 7.1% as of December 31, 2006 due 2010 . . . . . . . $
9,500
$
1,469
2007
2006
Term loans, with principal and interest payable quarterly, bore interest at a
weighted average rate of 6.8% as of December 31, 2006. . . . . . . . . . . . . .
8.0% senior notes due 2013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Less current maturities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
150,000
225
159,725
116
10,295
150,000
350
162,114
2,158
$159,609
$159,956
66
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Future maturities of debt as of December 31, 2007 are as follows (in thousands):
Year Ending December 31,
2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $
2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thereafter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
116
106
9,502
1
—
150,000
Credit Agreement — We account for amendments to our revolving credit facility under the provisions of EITF
Issue No. 98-14, Debtor’s Accounting for the Changes in Line-of-Credit or Revolving-Debt Arrangements
(EITF 98-14), and our term loan and 8.0% senior notes under the provisions of EITF Issue No. 96-19, Debtor’s
Accounting for a Modification or Exchange of Debt Instruments (EITF 96-19). Historically, we have periodically
amended the terms of our revolving credit facility and term loan to increase or decrease the individual and collective
borrowing base of the instruments on an as needed basis. We have not modified the terms of our 8.0% senior notes
subsequent to the original offering date. In connection with an amendment of our revolving credit facility, bank fees
incurred are deferred and amortized over the term of the new arrangement and, if applicable, any outstanding
deferred fees are expensed proportionately or in total, as appropriate per the guidance of EITF 98-14. In connection
with an amendment of our term loan, under the terms of EITF 96-19, bank and any third-party fees are either
expensed as an extinguishment of debt or deferred and amortized over the term of the agreement based upon
whether or not the old and new debt instruments are substantially different.
On June 30, 2006, we repaid approximately $25.0 million of our U.S. dollar denominated term loan. The
repayment of the term loan reduced the principal amount of the term loan from approximately $40 million to
$15 million. In connection with this loan repayment, approximately $0.3 million of deferred fees, representing a
proportionate amount of total deferred fees, were expensed as a loss on early extinguishment of debt.
On June 29, 2007, we repaid our foreign denominated term loan in full. In connection with this loan repayment,
approximately $0.1 million of deferred fees, representing a proportionate amount of total deferred fees, were
expensed as a loss on early extinguishment of debt.
On August 16, 2007, we entered into an Amendment and Waiver Letter to the Revolving Credit and Term Loan
Agreement (the “Amendment and Waiver Letter”). Pursuant to the terms of the Amendment and Waiver Letter, the
lenders consented to increase the size of permitted acquisitions to $40 million per fiscal year and waived any default
or event of default in connection with intercompany loans, contributions to capital, investments in capital stock or
mixed stock and indebtedness certificates provided in connection with permitted acquisitions.
On September 28, 2007, we entered into the Tenth Amendment to the Revolving Credit and Term Loan
Agreement (the “Tenth Amendment”). Pursuant to the terms of the Tenth Amendment, the lenders consented to
various amendments, including but not limited to, changes to reporting requirements and financial ratios, which
included the fixed charge coverage ratio and the maximum ratio of total indebtedness. Based on the provisions of
EITF 98-14, approximately $0.1 million third party fees relating to the credit agreement were capitalized and are
being amortized over the remaining life of the senior credit agreement.
On March 11, 2008, we entered into the Eleventh Amendment to the Revolving Credit and Term Loan
Agreement (the “Eleventh Amendment”). Pursuant to the terms of the Eleventh Amendment, the banks party
thereto consented to various amendments to the senior credit agreement, including but not limited to: (i) amend-
ments to the fixed charge ratio and the leverage ratio to provide the Company increased flexibility in the near future;
(ii) an amendment to the applicable margin pricing grid to include increased rates for prime rate and LIBOR
borrowings when the Company’s leverage ratio is equal to or greater than 4.0x; (iii) a reduction in the size of the
revolving credit facility from $100 million to $50 million, subject to increases to $75 million and then to
67
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
$100 million upon satisfaction of certain conditions, including meeting certain financial covenant thresholds;
(iv) increases in certain baskets in the indebtedness, asset disposition, investment and lien covenants contained in
the senior credit agreement; and (v) an amendment to permit proposed future tax planning.
As of December 31, 2007, approximately $3.9 million in deferred fees relating to previous amendments of our
senior credit agreement and fees related to the 8.0% senior note offering were outstanding and are being amortized
over the life of the agreements.
The senior credit agreement provides us with the ability to denominate a portion of our borrowings in foreign
currencies. As of December 31, 2007, $9.5 million of the revolving credit facility borrowings were denominated in
U.S. dollars and none of the revolving credit facility borrowings were denominated in British pounds sterling.
Terms, Covenants and Compliance Status — Our senior credit agreement contains various restrictive cove-
nants, including limiting indebtedness, rental obligations, investments and cash dividends, and also requires the
maintenance of certain financial ratios, including fixed charge coverage and funded debt to EBITDA as defined by
our senior credit agreement. We were in compliance with respect to these covenants as of December 31, 2007.
Under this agreement, borrowings bear interest at various rates plus a margin based on certain financial ratios.
Borrowings under the senior credit agreement are secured by specifically identified assets, comprising in total,
substantially all assets of the company and its subsidiaries party to the financing, except that the assets of our foreign
subsidiaries party to the financing only secure foreign borrowings. Additionally, as of December 31, 2007, we had
outstanding letters of credit of approximately $1.8 million.
8. Goodwill and Intangible Assets
Goodwill represents the excess of acquisition purchase price over the fair value of net assets acquired. We
review goodwill and indefinite-lived intangible assets for impairment annually in the second fiscal quarter and
whenever events or changes in circumstances indicate the carrying value may not be recoverable in accordance with
SFAS No. 142. We review definite-lived intangible assets in accordance with the provisions of SFAS No. 142 and
SFAS No. 144. The provisions of SFAS No. 142 require that a two-step impairment test be performed on goodwill.
In the first step, we compare the fair value of our reporting unit to our carrying value. Our reporting unit is consistent
with the reportable segment identified in Note 10 to the consolidated financial statements contained in this Annual
Report on Form 10-K for the year ended December 31, 2006. If the fair value of the reporting unit exceeds the
carrying value of the net assets assigned to that unit, goodwill is considered not impaired and we are not required to
perform further testing. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of
the reporting unit, then we must perform the second step of the impairment test in order to determine the implied fair
value of the reporting unit’s goodwill. If the carrying value of a reporting unit’s goodwill exceeds the implied fair
value, then we would record an impairment loss equal to the difference. SFAS No. 142 also requires that the fair
value of the purchased intangible assets with indefinite lives be estimated and compared to the carrying value. We
estimate the fair value of these intangible assets using an income approach. We recognize an impairment loss when
the estimated fair value of the intangible asset is less than the carrying value. In this regard, management considers
the following indicators in determining if events or changes in circumstances have occurred indicating that the
recoverability of the carrying amount of indefinite-lived and amortizing intangible assets should be assessed: (1) a
significant decrease in the market value of an asset; (2) a significant change in the extent or manner in which an asset
is used or a significant physical change in an asset; (3) a significant adverse change in legal factors or in the business
climate that could affect the value of an asset or an adverse action or assessment by a regulator; (4) an accumulation
of costs significantly in excess of the amount originally expected to acquire or construct an asset; and (5) a current
period operating or cash flow loss combined with a history of operating or cash flow losses or a projection or
forecast that demonstrates continuing losses associated with an asset used for the purpose of producing revenue. Our
annual goodwill analysis was performed during the second quarter of fiscal 2007 and did not result in an impairment
charge.
68
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Annually, or more frequently if events or circumstances change, a determination is made by management, in
accordance with SFAS No. 144 to ascertain whether property and equipment and certain definite-lived intangibles
have been impaired based on the sum of expected future undiscounted cash flows from operating activities. If the
estimated net cash flows are less than the carrying amount of such assets, we will recognize an impairment loss in an
amount necessary to write down the assets to fair value as determined from expected future discounted cash flows.
In accordance with SFAS 142, we test intangible assets with indefinite lives and goodwill for impairment annually
or when conditions indicate impairment may have occurred.
Determining the fair value of a reporting unit is judgmental in nature and involves the use of significant
estimates and assumptions. These estimates and assumptions include revenue growth rates and operating margins
used to calculate projected future cash flows, risk-adjusted discount rates, future economic and market conditions
and determination of appropriate market comparables. We base our fair value estimates on assumptions we believe
to be reasonable but that are unpredictable and inherently uncertain. The valuation approaches we use include the
Income Approach (the Discounted Cash Flow Method) and the Market Approach (the Guideline Company and
Transaction Methods) to estimate the fair value of the reporting unit; earnings are emphasized in the Discounted
Cash Flow, Guideline Company, and the Transaction Methods. In addition, these methods utilize market data in the
derivation of a value estimate and are forward-looking in nature. The Discounted Cash Flow Method utilizes a
market-derived rate of return to discount anticipated performance, while the Guideline Company Method and the
Transaction Method incorporate multiples that are based on the market’s assessment of future performance. Actual
future results may differ materially from those estimates.
Principal Factors Contributing to the Recognition of Goodwill
Mayflower:
The primary reasons for the acquisition of Mayflower and the principal factors that contributed to a purchase
price that resulted in the recognition of goodwill were:
(cid:129) Mayflower is the only non-captive producer of complete steel and aluminum truck cabs for the commercial
vehicle sector in North America;
(cid:129) We believe the acquisition allows us to be the only supplier worldwide to offer complete cab systems in
sequence, integrating interior trim and seats with the cab structure;
(cid:129) We believe the acquisition gives us a leading position in North American cab structures and complete cab
assemblies, as well as full service cab and sleeper engineering and development capabilities; and
(cid:129) Mayflower broadens our revenue base at International, Volvo/Mack and Freightliner and enhances our cross-
selling opportunities.
Monona:
The primary reasons for the acquisition of Monona and the principal factors that contributed to a purchase
price that resulted in the recognition of goodwill were:
(cid:129) Monona operates in the U.S. and Mexico which enhances our international footprint, solidifies our domestic
footprint and allows for cost savings opportunities;
(cid:129) We believe Monona enhances our ability to offer comprehensive cab systems to our customers and expands
our electronic assembly capabilities; and
(cid:129) Monona broadens our revenue base at Caterpillar, Oshkosh and Deere & Co. and enhances our cross-selling
opportunities.
69
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Cabarrus:
The primary reasons for the acquisition of Cabarrus and the principal factors that contributed to a purchase
price that resulted in the recognition of goodwill were:
(cid:129) Cabarrus offers injection molding capabilities and expertise which enhances our molding and plastics
product portfolio; and
(cid:129) We believe Cabarrus offers cross-selling opportunities as well as the capability to in-source products for cost
savings opportunities.
C.I.E.B.:
The primary reasons for the acquisition of C.I.E.B. and the principal factors that contributed to a purchase price
that resulted in the recognition of goodwill were:
(cid:129) C.I.E.B. provides us with a wide variety of bus and truck seats, complements our existing product offering
and provides us with a well positioned platform to utilize as a building block for our global expansion and
sourcing efforts.
PEKM:
The primary reasons for the acquisition of PEKM and the principal factors that contributed to a purchase price
that resulted in the recognition of goodwill were:
(cid:129) PEKM operates in the Czech Republic and Ukraine which enhances our international manufacturing
presence in developing regions of the world and allows for cost savings opportunities;
(cid:129) We believe PEKM enhances our ability to offer comprehensive products and services to new and existing
customers and markets and expands our electronic wire harness assembly capabilities; and
(cid:129) PEKM offers cross-selling opportunities and provides us with new customers, MAN, Daimler and Skoda.
Gage:
The primary reasons for the acquisition of Gage and the principal factors that contributed to a purchase price
that resulted in the recognition of goodwill were:
(cid:129) Gage offers heavy-gauge thermoforming capabilities and expertise which enhances our interior trim
capabilities; and
(cid:129) We believe Gage offers cross-selling opportunities as well as the capability to in-source products for cost
savings opportunities and broadens our revenue base at existing customers.
SBI:
The primary reasons for the acquisition of SBI and the principal factors that contributed to a purchase price that
resulted in the recognition of goodwill were:
(cid:129) SBI offers cut-and-sew capabilities and expertise which enhances our ability to centralize our existing
cut-and-sew operations for cost savings opportunities
70
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
The changes in the carrying amounts of goodwill for the fiscal year ended December 31, 2007, were comprised
of the following (in thousands):
Balance — December 31, 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $134,766
16,687
Increase due to acquisition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(588)
Post-acquisition adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
324
Currency translation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balance — December 31, 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $151,189
During the year ended December 31, 2007, we recorded approximately $0.6 million of post acquisition
adjustments as we finalize our purchase price allocations.
Our intangible assets as of December 31, 2007 and 2006 were comprised of the following, respectively (in
thousands):
December 31, 2007
Weighted-
Average
Amortization
Period
Gross Carrying
Amount
Accumulated
Amortization
Net Carrying
Amount
Definite-lived intangible assets:
Tradenames/Trademarks . . . . . . . . . . . . .
Licenses . . . . . . . . . . . . . . . . . . . . . . . .
Customer relationships . . . . . . . . . . . . . .
30 years
7 years
15 years
Indefinite-lived intangible assets:
Goodwill . . . . . . . . . . . . . . . . . . . . . . . .
Customer relationships . . . . . . . . . . . . . .
Total consolidated goodwill and
intangible assets . . . . . . . . . . . . . . . . .
$ 9,790
438
14,234
$ 24,462
$151,189
74,800
$225,989
$ (915)
(313)
(459)
$
8,875
125
13,775
$(1,687)
$ 22,775
$ —
—
$ —
$151,189
74,800
$225,989
$248,764
December 31, 2006
Weighted-
Average
Amortization
Period
Gross Carrying
Amount
Accumulated
Amortization
Net Carrying
Amount
Definite-lived intangible assets:
Tradenames/Trademarks . . . . . . . . . . . . .
Licenses . . . . . . . . . . . . . . . . . . . . . . . .
30 years
7 years
Indefinite-lived intangible assets:
Goodwill . . . . . . . . . . . . . . . . . . . . . . . .
Customer relationships . . . . . . . . . . . . . .
Total consolidated goodwill and
intangible assets . . . . . . . . . . . . . . . . .
71
$ 9,790
438
$ 10,228
$134,766
74,800
$209,566
$(589)
(251)
$(840)
$ —
—
$ —
$
9,201
187
$
9,388
$134,766
74,800
$209,566
$218,954
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
The aggregate intangible asset amortization expense was approximately $0.9 million, $0.4 million and
$0.3 million for the fiscal years ended December 31, 2007, 2006 and 2005, respectively.
The estimated intangible asset amortization expense for the five succeeding fiscal years ending after
December 31, 2007, is as follows (in thousands):
2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$1,338
$1,338
$1,275
$1,275
$1,275
9. Accounting for Income Taxes
Pre-tax (loss) income consisted of the following for the years ended December 31 (in thousands):
2007
2006
2005
Domestic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foreign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$(15,296)
10,460
$76,336
9,459
$70,673
7,876
Total
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ (4,836)
$85,795
$78,549
A reconciliation of income taxes computed at the statutory rates to the reported income tax provision for the
years ended December 31 is as follows (in thousands):
2007
2006
2005
Federal provision at statutory rate . . . . . . . . . . . . . . . . . . . . . . . . . . $(1,693)
1,917
U.S. tax on foreign income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(941)
Foreign provision in excess (less) than U.S. tax rate . . . . . . . . . . . .
961
State taxes, net of federal benefit . . . . . . . . . . . . . . . . . . . . . . . . . .
Extraterritorial income exclusion. . . . . . . . . . . . . . . . . . . . . . . . . . .
—
(1,673)
Tax reserves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,249
Valuation allowance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(2,466)
Tax credits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,061
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$30,028
272
(231)
1,864
(2,169)
(166)
41
(1,275)
(619)
$27,492
702
(242)
1,625
(55)
80
—
(878)
414
(Benefit) provision for income taxes . . . . . . . . . . . . . . . . . . . . . . $(1,585)
$27,745
$29,138
The (benefit) provision for income taxes for the years ended December 31 is as follows (in thousands):
2007
2006
2005
Current
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deferred. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$(10,635)
9,050
$18,328
9,417
$21,890
7,248
(Benefit) provision for income taxes . . . . . . . . . . . . . . . . . . . . .
$ (1,585)
$27,745
$29,138
72
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
A summary of deferred income tax assets and liabilities as of December 31 is as follows (in thousands):
2007
2006
Current deferred tax assets:
Accounts receivable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $
Inventories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foreign exchange contracts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stock options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accrued benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other accruals not currently deductible for tax purposes . . . . . . . . . . . . . . .
820
2,937
1,859
524
1,487
4,942
420
$ 1,560
2,950
2,550
(2,947)
1,478
1,830
1,398
Net current deferred assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12,989
$ 8,819
Noncurrent deferred tax liabilities:
Amortization and fixed assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $(33,062)
2,076
Pension obligation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,903
Net operating loss carryforwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6,216
Foreign tax credit carryforwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(1,290)
Valuation allowance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(2,919)
Other accruals not currently deductible for tax purposes . . . . . . . . . . . . . . .
$(24,212)
7,629
1,548
3,818
(41)
647
Net noncurrent deferred tax (liabilities) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $(27,076)
$(10,611)
As of December 31, 2007, we had approximately $2.6 million of federal and $39.0 million of state net
operating loss carryforwards related to our U.S. operations. Utilization of these losses is subject to the tax laws of
the applicable tax jurisdiction and our legal organizational structure, and may be limited by the ability of certain
subsidiaries to generate taxable income in the associated tax jurisdiction. Our net operating loss carryforwards
expire beginning in 2009 and continue through 2027. The deferred income tax provision consists of the change in
the deferred income tax assets, adjusted for the impact of the tax benefit on the cumulative effect of the change in
accounting and the tax impact of certain of the other comprehensive income (loss) items. Deferred taxes have not
been provided on unremitted earnings of certain foreign subsidiaries that arose in fiscal years ending on or before
December 31, 2007. It is not practical to determine the additional tax, if any, that would result from the remittance of
these amounts.
We operate in multiple jurisdictions and are routinely under audit by federal, state and international tax
authorities. Exposures exist related to various filing positions which may require an extended period of time to
resolve and may result in income tax adjustments by the taxing authorities. Reserves for these potential exposures
have been established which represent management’s best estimate of the probable adjustments. On a quarterly
basis, management evaluates the reserve amounts in light of any additional information and adjusts the reserve
balances as necessary to reflect the best estimate of the probable outcomes. Management believes that we have
established the appropriate reserve for these estimated exposures. However, actual results may differ from these
estimates. The resolution of these matters in a particular future period could have an impact on our consolidated
statement of operations and provision for income taxes.
We file federal income tax returns in the United States and income tax returns in various states and foreign
jurisdictions. With few exceptions, we are no longer subject to income tax examinations by any of the taxing
authorities for years before 2004. There are currently three income tax examinations in process. We do not
anticipate that any adjustments from these examinations will result in material changes to our consolidated financial
position and results of operations.
73
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
We adopted the provisions of FIN 48 effective January 1, 2007. As of December 31, 2007, we provided a
liability of approximately $2.7 million of unrecognized tax benefits related to various federal and state income tax
positions. Of the $2.7 million, the amount that would impact our effective tax rate, if recognized, is approximately
$1.6 million. The remaining $1.1 million of unrecognized tax benefits consists of items that are offset by deferred
tax assets subject to valuation allowances, and thus could further impact the effective tax rate.
We accrue penalties and interest related to unrecognized tax benefits through income tax expense, which is
consistent with the recognition of these items in prior reporting periods. We had approximately $0.6 million accrued
for the payment of interest and penalties at December 31, 2007, of which $0.2 million was accrued during the
current year. Accrued interest and penalties are included in the $2.7 million of unrecognized tax benefits.
During the current year, we released approximately $1.9 million of tax reserves which related to tax, interest
and penalties associated with items with expiring statues of limitations. We anticipate events could occur within the
next 12 months that would have an impact on the amount of unrecognized tax benefits that would be required.
Approximately $0.8 million of unrecognized tax benefits relate to items that are affected by expiring statutes of
limitation within the next 12 months.
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):
Balance — January 1, 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3,944
309
Gross increase — tax positions in prior periods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
Gross decreases — tax positions in prior periods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
313
Gross increases — current period tax positions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
Settlements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(1,871)
Lapse of statute of limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balance — December 31, 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 2,695
10. Segment Reporting
In accordance with the provisions of SFAS No. 131, Disclosures about Segments of an Enterprise and Related
Information, our operating components constitute a single operating segment due to the manner in which our key
decisions are made as well as the manner in which our operating components collectively support similar markets
and customers, utilize similar manufacturing and assembly processes and utilize the same centralized network of
personnel.
The following table presents revenues and long-lived assets for each of the geographic areas in which we
operate (in thousands):
2007
2006
2005
Years Ended December 31,
Revenues
North America . . . . . . . . . $538,116
132,972
United Kingdom . . . . . . . .
25,698
All other countries . . . . . . .
Long-Lived
Assets
$85,817
5,913
6,528
Revenues
$800,069
106,545
12,137
Long-Lived
Assets
$81,930
5,861
2,597
Revenues
$636,448
105,832
12,201
Long-Lived
Assets
$74,633
4,793
989
$696,786
$98,258
$918,751
$90,388
$754,481
$80,415
Revenues are attributed to geographic locations based on the location of where the product is manufactured.
Included in all other countries are intercompany sales eliminations.
74
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
The following is a summary composition by product category of our revenues (dollars in thousands):
Seats and seating systems . . . . . . . . . . . .
Cab structures, sleeper boxes, body panels
and structural components . . . . . . . . . .
Electronic wire harnesses and panel
assemblies . . . . . . . . . . . . . . . . . . . . . .
Trim systems and components . . . . . . . . .
Mirrors, wipers and controls . . . . . . . . . .
2007
Revenues
$248,098
150,371
130,863
109,869
57,585
Years Ended December 31,
2006
Revenues
$266,401
317,682
103,417
158,707
72,544
2005
Revenues
$241,941
252,090
54,966
133,591
71,893
%
29
35
11
17
8
%
35
22
19
16
8
%
32
33
7
18
10
$696,786
100
$918,751
100
$754,481
100
The significant change in the 2007 product categories is primarily the result of the reduction in Class 8 North
American heavy truck volumes.
11. Commitments and Contingencies
Leases — We lease office and manufacturing space and certain equipment under non-cancelable operating
lease agreements that require us to pay maintenance, insurance, taxes and other expenses in addition to annual
rentals. The anticipated future lease costs are based in part on certain assumptions and we will continue to monitor
these costs to determine if the estimates need to be revised in the future. Lease expense was approximately
$11.8 million, $8.7 million and $8.4 million in 2007, 2006 and 2005, respectively. Capital lease agreements entered
into by us are immaterial in total. Future minimum annual rental commitments at December 31, 2007 under these
operating leases are as follows (in thousands):
Year Ending December 31,
2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thereafter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$10,227
8,293
7,039
6,012
5,450
23,189
Litigation — We are subject to various legal actions and claims incidental to our business, including those
arising out of alleged defects, product warranties and employment-related, income tax and environmental matters.
Management believes that we maintain adequate insurance to cover these claims. We have established reserves for
issues that are probable and estimatable in amounts management believes are adequate to cover reasonable adverse
judgments not covered by insurance. Based upon the information available to management and discussions with
legal counsel, it is the opinion of management that the ultimate outcome of the various legal actions and claims that
are incidental to our business will not have a material adverse impact on the consolidated financial position, results
of operations or cash flows; however, such matters are subject to many uncertainties and the outcomes of individual
matters are not predictable with assurance.
12. Stockholders’ Investment
Common Stock — Our authorized capital stock consists of 30,000,000 shares of common stock with a par
value of $0.01 per share.
75
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Preferred Stock — Our authorized capital stock consists of 5,000,000 shares of preferred stock with a par value
of $0.01 per share, with no shares outstanding as of December 31, 2007.
Earnings Per Share — In accordance with SFAS No. 128, Earnings per Share, as amended, basic earnings per
share is determined by dividing net income by the weighted average number of common shares outstanding during
the year. Diluted earnings per share, and all other diluted per share amounts presented, is determined by dividing net
income by the weighted average number of common shares and potential common shares outstanding during the
period as determined by the Treasury Stock Method, as amended, in SFAS No. 123(R), Share-Based Payment.
Potential common shares are included in the diluted earnings per share calculation when dilutive. Diluted earnings
per share for years ended December 31, 2007, 2006 and 2005 includes the effects of potential common shares
consisting of common stock issuable upon exercise of outstanding stock options and the effect of nonvested
restricted stock when dilutive (in thousands, except per share amounts):
Net (loss) income applicable to common stockholders — basic and
diluted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weighted average number of common shares outstanding . . . . . . . .
Dilutive effect of outstanding stock options and restricted stock
2007
2006
2005
$ (3,251)
$58,050
$49,411
21,439
21,151
19,440
grants after application of the treasury stock method . . . . . . . . . .
—
394
257
Dilutive shares outstanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21,439
21,545
19,697
Basic (loss) earnings per share . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ (0.15)
$ 2.74
$ 2.54
Diluted (loss) earnings per share . . . . . . . . . . . . . . . . . . . . . . . . . .
$ (0.15)
$ 2.69
$ 2.51
As of December 31, 2007, diluted loss per share excludes approximately 161 thousand of outstanding stock
options and non-vested restricted stock as the effect would have been anti-dilutive.
Dividends — We have not declared or paid any cash dividends in the past. The terms of our senior credit
agreement restricts the payment or distribution of our cash or other assets, including cash dividend payments.
13. Share-Based Compensation
Effective January 1, 2006, we adopted SFAS No. 123(R) using the modified prospective application transition
method. SFAS No. 123(R) eliminates the intrinsic value method under Accounting Principles Board (“APB”)
Opinion No. 25 as an alternative method of accounting for share-based compensation arrangements.
SFAS No. 123(R) also revises the fair value-based method of accounting for share-based payment liabilities,
forfeitures and modifications of share-based compensation arrangements and clarifies the guidance of
SFAS No. 123, Accounting for Stock-Based Compensation, in several areas, including measuring fair value,
classifying an award as equity or as a liability and attributing compensation cost to reporting periods. Prior to our
adoption of SFAS No. 123(R), benefits of tax deductions in excess of recognized compensation costs were reported
as operating cash flows. SFAS No. 123(R) amends SFAS No. 95, Statement of Cash Flows, to require that excess tax
benefits be reported as a financing cash inflow rather than as a reduction of taxes paid, which is included within
operating cash flows.
We estimate our pre-tax share-based compensation expense to be approximately $3.9 million in 2008 based on
our current share-based compensation arrangements. The compensation expense that has been charged against
income for those arrangements was approximately $3.1 million for the year ended December 31, 2007. The total
income tax benefit recognized in our consolidated statement of operations for share-based compensation arrange-
ments was approximately $1.0 million for the year ended December 31, 2007. Because we accounted for our share-
based compensation arrangements under APB Opinion No. 25 prior to adopting SFAS No. 123(R), our net income
for the year ended December 31, 2005 does not include any compensation expense related to these arrangements.
76
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
For the year ended December 31, 2006, the adoption of SFAS No. 123(R) resulted in incremental share-based
compensation expense of approximately $0.6 million. The incremental share-based compensation expense caused
income before provision for income taxes to decrease for the year ended December 31, 2006 by approximately
$0.6 million, and net income to decrease for the year by approximately $0.4 million. In addition, basic and diluted
earnings per share decreased by $0.02 and $0.02, respectively, for the year ended December 31, 2006. Cash
provided by operating activities decreased and cash provided by financing activities increased by approximately
$347 thousand for the year ended December 31, 2006, related to excess tax benefits from share-based payment
arrangements.
The following table illustrates the effect on net income and earnings per share had we applied the fair value
recognition provisions of SFAS No. 123(R) to awards granted under our amended and restated equity incentive plan
prior to the adoption of this standard for the year ended December 31, 2005 (in thousands, except per share
amounts — unaudited):
Net income, as reported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Less): Share-based compensation expense determined under the the fair-value-based
2005
$49,411
method for all awards, net of related tax effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(390)
Pro forma net income . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$49,021
Basic earnings per share:
As reported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 2.54
Pro forma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 2.52
Diluted earnings per share:
As reported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 2.51
Pro forma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 2.49
Stock Option Grants and Restricted Stock Awards — In 1998, we granted options to purchase 57,902 shares of
common stock at $9.43 per share, which are exercisable through December 2008. The options were granted at
exercise prices determined to be at or above fair value on the date of grant. As of December 31, 2007, 28,951 of the
initially granted options have been exercised.
In May 2004, we granted options to purchase 910,869 shares of common stock at $5.54 per share. These
options have a ten-year term and the original terms provided for 50% of the options becoming exercisable ratably on
June 30, 2005 and June 30, 2006. During June 2004, we modified the terms of these options such that they became
100% vested immediately.
In October 2004, we granted options to purchase 598,950 shares of common stock at $15.84 per share. These
options have a ten-year term and vest ratably in three equal annual installments commencing on October 20, 2005.
As of December 31, 2007, there was no amount remaining of unearned compensation related to nonvested stock
options granted in October 2004 under the amended and restated equity incentive plan.
In November 2005, 168,700 shares of restricted stock were awarded by our compensation committee under our
Amended and Restated Equity Incentive Plan. Restricted stock is a grant of shares of common stock that may not be
sold, encumbered or disposed of, and that may be forfeited in the event of certain terminations of employment, prior
to the end of a restricted period set by the compensation committee. The shares of restricted stock granted in
November 2005 vest in three equal annual installments commencing on October 20, 2006. A participant granted
restricted stock generally has all of the rights of a stockholder, unless the compensation committee determines
otherwise. As of December 31, 2007, there was approximately $1.1 million of unearned compensation related to
nonvested restricted stock awarded in 2005 under the amended and restated equity incentive plan. This expense is
77
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
subject to future adjustments for vesting and forfeitures and will be recognized on a straight-line basis over the
remaining period of 10 months.
In November 2006, 207,700 shares of restricted stock were awarded by our compensation committee under our
Amended and Restated Equity Incentive Plan. Restricted stock is a grant of shares of common stock that may not be
sold, encumbered or disposed of, and that may be forfeited in the event of certain terminations of employment, prior
to the end of a restricted period set by the compensation committee. The shares of restricted stock granted in
November 2006 vest in three equal annual installments commencing on October 20, 2007. A participant granted
restricted stock generally has all of the rights of a stockholder, unless the compensation committee determines
otherwise. As of December 31, 2007, there was approximately $2.8 million of unearned compensation related to
nonvested restricted stock awarded in 2006 under the amended and restated equity incentive plan. This expense is
subject to future adjustments for vesting and forfeitures and will be recognized on a straight-line basis over the
remaining period of 22 months.
In February 2007, 10,000 shares of restricted stock and in March 2007, 10,000 shares of restricted stock were
awarded by our compensation committee under our Amended and Restated Equity Incentive Plan. The shares of
restricted stock granted in February 2007 and March 2007 vest ratably in three equal annual installments
commencing on October 20, 2007. A participant granted restricted stock generally has all of the rights of a
stockholder, unless the compensation committee determines otherwise. As of December 31, 2007, there was
approximately $0.2 million of unearned compensation related to nonvested restricted stock awarded in 2007 under
the amended and restated equity incentive plan. This expense is subject to future adjustments for vesting and
forfeitures and will be recognized on a straight-line basis over the remaining period of 22 months.
In October 2007, 328,900 shares of restricted stock were awarded by our compensation committee under our
Second Amended and Restated Equity Incentive Plan. Restricted stock is a grant of shares of common stock that
may not be sold, encumbered or disposed of, and that may be forfeited in the event of certain terminations of
employment, prior to the end of a restricted period set by the compensation committee. The shares of restricted
stock granted in October 2007 vest in three equal annual installments commencing on October 20, 2008. A
participant granted restricted stock generally has all of the rights of a stockholder, unless the compensation
committee determines otherwise. As of December 31, 2007, there was approximately $4.2 million of unearned
compensation related to nonvested restricted stock awarded in 2007 under the second amended and restated equity
incentive plan. This expense is subject to future adjustments for vesting and forfeitures and will be recognized on a
straight-line basis over the remaining period of 34 months.
We use the Black-Scholes option-pricing model to estimate the fair value of equity-based stock option grants
with the following weighted-average assumptions:
Weighted-average fair value of option and restricted stock grants. . . . . . . . . . . . . . . . . . . . .
Risk-free interest rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expected volatility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expected life in months . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2004
Stock
Option
Grants
$ 3.34
4.50%
23.12%
36
We currently estimate the forfeiture rate for our October 2004 stock option grants, November 2005 restricted
stock awards, November 2006, February/March and October 2007 restricted stock awards at 13.9%, 15.0%, 13.3%,
0.0% and 10.0%, respectively, for all participants of each plan.
78
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
A summary of the status of our stock options as of December 31, 2007 and changes during the twelve-month
period ending December 31, 2007 is presented below:
Weighted-
Average
Exercise
Price
Weighted-
Average
Remaining
Contractual
Life (Years)
Aggregate
Intrinsic
Value (000’s)
Stock Options
Outstanding at December 31, 2006 . . . . . . . . . . . . .
Granted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exercised . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forfeited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outstanding at December 31, 2007 . . . . . . . . . . . . .
Exercisable at December 31, 2007 . . . . . . . . . . . . .
Options
(000’s)
848
—
(69)
(29)
750
750
$11.94
—
6.74
10.90
$12.45
$12.45
Nonvested, expected to vest at December 31,
2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
$15.84
7.5
—
—
—
6.5
6.5
6.5
$8,588
—
—
—
$2,013
$2,013
$ —
The following table summarizes information about the nonvested stock options and restricted stock grants as of
December 31, 2007:
Nonvested Stock
Options
Nonvested Restricted
Stock
Nonvested at December 31, 2006 . . . . . . . . . . . . . . . . .
Granted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vested . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forfeited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Options
(000’s)
175
—
(167)
(8)
Nonvested at December 31, 2007 . . . . . . . . . . . . . . . . .
—
Weighted-
Average
Grant-Date
Fair Value
$3.34
—
—
—
$ —
Weighted-
Average
Grant-Date
Fair Value
$20.21
13.78
20.11
19.94
$16.94
Shares
(000’s)
309
349
(121)
(17)
520
We expect employees to surrender approximately 22 thousand shares of our common stock in connection with
the vesting of restricted stock during 2008 to satisfy income tax withholding obligations.
As of December 31, 2007, a total of 798,598 shares were available from the 2.0 million shares authorized for
award under our Second Amended and Restated Equity Incentive Plan, including cumulative forfeitures.
Repurchase of Common Stock — During 2007, we did not repurchase any shares of common stock.
14. Defined Contribution Plans, Pension and Other Post-Retirement Benefit Plans
Defined Contribution Plans — We sponsor various 401(k) employee savings plans covering all eligible
employees, as defined. Eligible employees can contribute on a pre-tax basis to the plan. In accordance with the
terms of the 401(k) plans, we elect to match a certain percentage of the participants’ contributions to the plans, as
defined. We recognized expense associated with these plans of approximately $1.7 million, $1.5 million and
$1.2 million in 2007, 2006 and 2005, respectively.
Pension and Other Post-Retirement Benefit Plans — We sponsor pension and other post-retirement benefit
plans that cover certain hourly and salaried employees in the United States and United Kingdom. Our policy is to
make annual contributions to the plans to fund the normal cost as required by local regulations. In addition, we have
a post-retirement benefit plan for certain U.S. operations, retirees and their dependents.
79
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
In September 2006, the FASB issued SFAS No. 158, Employers’ Accounting for Defined Benefit Pension and
Other Postretirement Plans — an amendment of FASB Statements No. 87, 88, 106, and 132(R). SFAS No. 158
requires an employer to recognize the funded status of defined benefit pension and other post-retirement benefit
plans as an asset or liability in our consolidated balance sheet and to recognize changes in that funded status in the
year in which the changes occur through accumulated other comprehensive income in stockholders’ investment.
SFAS No. 158 also requires that, beginning in 2008, our assumptions used to measure our annual defined benefit
pension and other post-retirement benefit plans be determined as of the balance sheet date, and all plan assets and
liabilities be reported as of that date. Currently, the assumptions used to measure our annual defined benefit pension
and other post-retirement benefit plan expenses are determined as of October 1 or December 31 (measurement
dates) for our various plans, and all plan assets and liabilities are generally reported as of those dates. In accordance
with the provisions of SFAS No. 158, prior year amounts have not been adjusted.
The change in benefit obligation, plan assets and funded status as of and for the years ended December 31,
2007 and 2006 consisted of the following (in thousands):
U.S. Pension Plans
2007
2006
Non-U.S. Pension Plans
Other
Post-Retirement
Benefit Plans
2007
2006
2007
2006
Change in benefit obligation:
Benefit obligation — Beginning of
year . . . . . . . . . . . . . . . . . . . . . . . . . . $30,622
420
1,739
—
211
—
(1,008)
(982)
—
Service cost . . . . . . . . . . . . . . . . . . . . . .
Interest cost . . . . . . . . . . . . . . . . . . . . . .
Plan participants’ contributions . . . . . . . .
Plan amendments . . . . . . . . . . . . . . . . . .
Curtailment (gain) . . . . . . . . . . . . . . . . .
Benefits paid . . . . . . . . . . . . . . . . . . . . .
Actuarial (gain) loss. . . . . . . . . . . . . . . .
Exchange rate changes . . . . . . . . . . . . . .
$ 30,664
628
1,684
—
59
(2,193)
(1,001)
781
—
$ 47,067
—
2,301
—
—
—
(3,365)
459
614
$ 39,850
263
2,253
174
—
(776)
(1,360)
1,189
5,474
$ 4,398
$ 2,447
61
17
164
139
—
—
414
206
— (2,057)
(184)
(141)
—
(336)
93
—
31,002
30,622
47,076
47,067
2,774
2,447
Benefit obligation at end of year. . . . . . .
Change in plan assets:
Fair value of plan assets — Beginning of
year . . . . . . . . . . . . . . . . . . . . . . . . . .
Actual return on plan assets . . . . . . . . . .
Acquisitions/divestitures . . . . . . . . . . . . .
Employer contributions . . . . . . . . . . . . .
Plan participants’ contributions . . . . . . . .
Benefits paid . . . . . . . . . . . . . . . . . . . . .
Risk benefit insurance premium . . . . . . .
Exchange rate changes . . . . . . . . . . . . . .
20,588
4,476
—
2,200
—
(1,008)
—
—
19,722
1,061
—
806
—
(1,001)
—
—
37,013
570
—
947
—
(3,365)
—
484
29,844
3,278
—
1,033
174
(1,360)
(55)
4,099
—
—
—
422
—
(336)
—
—
86
—
—
—
240
—
(184)
—
—
56
Fair value of plan assets at end of year . .
26,256
20,588
35,649
37,013
Funded status. . . . . . . . . . . . . . . . . . . . . $ (4,746)
$(10,034)
$(11,427)
$(10,054)
$(2,688)
$(2,391)
80
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Amounts recognized in the consolidated balance sheets at December 31 consist of (in thousands):
U.S. Pension Plans
2007
2006
Non-U.S. Pension Plans
Other
Post-Retirement
Benefit Plans
2007
2006
2007
2006
Current liabilities . . . . . . . . . . . . . .
Noncurrent liabilities . . . . . . . . . . . .
$ — $ — $ — $ — $ 527
2,161
11,427
4,746
10,034
10,054
$ 292
2,099
Net amount recognized . . . . . . . . . .
$4,746
$10,034
$11,427
$10,054
$2,688
$2,391
Accumulated Other Comprehensive Income — Amounts recognized in accumulated other comprehensive
income at December 31 consist of (in thousands):
U.S. Pension Plans
2007
2006
Non-U.S. Pension Plans
2007
2006
Other
Post-Retirement
Benefit Plans
2006
2007
Actuarial loss (gain), net of tax . . . . . $1,654
$(823)
$(7,133)
$(6,008)
$73
$129
Defined benefits plans with a projected benefit obligation and accumulated benefit obligation in excess of plan
assets at December 31 are as follows (in thousands):
U.S. Pension Plans
2007
2006
Non-U.S. Pension Plans
2007
2006
Projected benefit obligation . . . . . . . . . . . . . . . . . . . . .
Accumulated benefit obligation . . . . . . . . . . . . . . . . . . .
Fair value of plan assets . . . . . . . . . . . . . . . . . . . . . . . .
$31,002
$31,002
$26,256
$30,622
$30,622
$20,588
$47,076
$47,076
$35,649
$47,067
$47,067
$37,013
The components of net periodic benefit cost for the years ended December 31 are as follows (in thousands):
U.S. Pension Plans
2006
2005
2007
Non-U.S. Pension Plans
2006
2005
2007
Other Post-Retirement
Benefit Plans
2007
2006
2005
Service cost . . . . . . . . . $
Interest cost . . . . . . . . .
Expected return on plan
assets . . . . . . . . . . . .
Amortization of prior
service costs . . . . . . .
Recognized actuarial
loss . . . . . . . . . . . . .
Net periodic benefit
420 $
628 $
952 $ — $
263 $
991 $ 17 $
1,739
1,684
1,439
2,301
2,253
1,862
139
$
61
164
233
362
(1,539)
(1,649)
(1,419)
(2,178)
(2,030)
(1,931) —
—
—
—
—
—
—
—
6
17
191
263
334
—
—
—
—
—
—
—
2
cost . . . . . . . . . . . . .
620
663
972
314
755
1,273
156
225
597
Curtailment (gain)
loss . . . . . . . . . . . . .
— (1,949)
Special Termination
Benefits . . . . . . . . . .
211
59
—
61
—
—
151
—
—
— (2,057)
(3,097)
— 414
207
(447)
Net benefit cost
(gain) . . . . . . . . . . . . $
831
$(1,227) $ 1,033 $
314
$
906
$ 1,273 $570 $(1,625) $(2,947)
81
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Other Changes in Plan Assets and Benefit Obligations Recognized in Other Comprehensive Income —
Amounts recognized as other changes in plan assets and benefit obligations in other comprehensive income at
December 31 are as follows (in thousands):
U.S. Pension Plans
2007
2006
Non-U.S. Pension Plans
2007
2006
2007
$(3,919)
$ — $2,066
$ — $
93
Other Post-Retirement
Benefit Plans
2006
$ —
—
—
(191)
—
—
—
Actuarial (gain) loss . . . . . .
Amortization of actuarial
(gain) . . . . . . . . . . . . . . .
Total recognized in other
comprehensive income . . .
$(3,919)
$ — $1,875
$ — $
93
$ —
The estimated actuarial loss for the defined benefit pension plans that will be amortized from accumulated
other comprehensive income into net periodic benefit cost over the next fiscal year are $0.3 million. The estimated
actuarial gain for the other post-retirement benefit plans that will be amortized from accumulated other compre-
hensive income into net periodic benefit cost over the next fiscal year are $22 thousand.
Weighted-average assumptions used to determine benefit obligations at December 31 are as follows:
U.S. Pension Plans
2006
2005
2007
Non-U.S. Pension Plans
2007
2005
2006
Other Post-Retirement
Benefit Plans
2007
2006
2005
Discount rate . . . . . . . . . . . . .
Rate of compensation
6.00% 5.75% 5.50% 5.90% 5.00% 5.00% 6.00%
5.75% 5.50-5.75%
increase . . . . . . . . . . . . . . . N/A
N/A
3.50% N/A
N/A
3.30% N/A
N/A
N/A
Weighted-average assumptions used to determine net periodic benefit cost at December 31 are as follows:
U.S. Pension Plans
2006
2005
2007
Non-U.S. Pension Plans
2007
2005
2006
Other Post-Retirement
Benefit Plans
2007
2006
2005
Discount rate . . . . . . . . . . . . .
Expected return on plan
5.75% 5.50% 5.66% 5.00% 5.00% 5.50% 5.75% 5.50-5.75% 5.66-5.75%
assets . . . . . . . . . . . . . . . . .
7.50% 8.50% 8.50% 6.00% 6.00% 7.50% N/A
Rate of compensation
increase . . . . . . . . . . . . . . . N/A
N/A
3.50% N/A
3.30% 3.20% N/A
N/A
N/A
N/A
N/A
We employ a total return investment approach whereby a mix of equities and fixed income investments are
used to maximize the long-term return of plan assets for a prudent level of risk. The intent of this strategy is to
minimize plan expenses by outperforming plan liabilities over the long run. Risk tolerance is established through
careful consideration of plan liabilities, plan funded status and corporate financial condition. The investment
portfolio contains a diversified blend of equity and fixed income investments. Furthermore, equity investments are
diversified across U.S. and non-U.S. stocks as well as growth, value and small and large capitalizations. Other assets
such as real estate, private equity and hedge funds are used judiciously to enhance long-term returns while
improving portfolio diversification. Derivatives may be used to gain market exposure in an efficient and timely
manner; however, derivatives may not be used to leverage the portfolio beyond the market value of the underlying
investments. Investment risk is measured and monitored on an ongoing basis through annual liability measure-
ments, periodic asset/liability studies and quarterly investment portfolio reviews. We expect to contribute
$2.7 million to our pension plans and $0.5 million to our other post-retirement benefit plans in 2008.
82
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
Our current investment allocation target for our pension plans for 2008 and our weighted-average asset
allocations of our pension assets for the years ended December 31, by asset category, are as follows:
Target Allocation
U.S.
Non-U.S.
Pension Plans
2007
2006
Equity securities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Debt securities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Real estate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52%
33
15
0
60%
30
10
0
54% 58%
24
18
4
24
14
4
100% 100% 100% 100%
For measurement purposes, a 10.0% annual rate of increase in the per capita cost of covered health care
benefits was assumed for 2007. The rate was assumed to decrease gradually to 5.5% through 2013 and remain
constant thereafter. Assumed health care cost trend rates can have a significant effect on the amounts reported for
other post-retirement benefit plans.
Differences in the ultimate health care cost trend rates within the range indicated below would have had the
following impact on 2007 other post-retirement benefit results (in thousands):
Increase (Decrease) from change in health care cost trend rates
Other post-retirement benefit expense . . . . . . . . . . . . . . . . . . . . . . .
Other post-retirement benefit liability . . . . . . . . . . . . . . . . . . . . . . .
$ 31
$105
$(38)
$(98)
The following table summarizes our expected future benefit payments of our pension and other post-retirement
1 Percentage
Point Increase
1 Percentage
Point Decrease
benefit plans (in thousands):
Year
Pension Plans
Other Post-
Retirement
Benefit Plans
2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2013 to 2017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 2,159
$ 2,429
$ 2,641
$ 2,938
$ 3,313
$21,412
$527
$463
$433
$410
$297
$591
During 2005, we elected to freeze the pension plan for Mayflower salaried employees. This action was
undertaken by us in an effort to minimize future liabilities and as part of the integration process.
During 2005, we also elected to terminate the Mayflower medical and dental post-retirement plan. This action
was undertaken by us in an effort to minimize future liabilities and as part of the integration process. As a result of
this action, we recorded a curtailment gain of approximately $3.1 million which is included in the consolidated
financial statements of operations for the year ending December 31, 2005.
During 2006, we elected to freeze our salaried pension and other post-retirement benefits plans at our United
States and United Kingdom based operations. This action was undertaken by us in an effort to minimize future
liabilities.
83
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
15. Related Party Transactions
We entered into the following related party transactions during the three years ended December 31, 2007:
On January 31, 2005, we entered into an advisory agreement with Hidden Creek Partners, LLC (“HCP”),
(formerly Hidden Creek Industries (“HCI”)), pursuant to which HCP agreed to assist us in financing activities,
strategic initiatives and acquisitions in exchange for an annual fee. In addition, the Company agreed to pay HCP a
transaction fee for services rendered that relate to transactions we may enter into from time to time, in an amount
that is negotiated between our Chief Executive Officer or Chief Financial Officer and approved by our Board of
Directors. All of the principals of HCP are employees and managing directors of Thayer Capital Partners
(“Thayer”). Scott D. Rued, our Chairman, is a managing partner of Thayer and Richard A. Snell, a member of
our Board of Directors and our Compensation Committee Chairman, is an operating partner of Thayer. Thayer
Capital, Scott D. Rued and Richard A. Snell are neither a party to, nor have any direct or indirect financial interest in
the advisory agreement between us and HCP. For the years ended December 31, 2007, 2006 and 2005, we made
payments under these arrangements of approximately $0.2 million, $0.3 million and $1.8 million, respectively. This
agreement has not been renewed for 2008.
On May 1, 2004, we entered into a Product Sourcing Assistance Agreement with Baird Asia Limited (“BAL”),
an affiliate of Baird Capital Partners III L.P. Pursuant to the agreement, BAL assisted us in procuring materials and
parts from Asia, including the countries of China, Malaysia, Hong Kong and Taiwan. BAL received as compen-
sation a percentage of the price of the materials and parts supplied to us, of at least 2% of the price but not exceeding
10% of the price, to be determined on a case-by-case basis. For the year ended December 31, 2005, we incurred
expenses of approximately $3.1 million for the value of goods and services purchased under this agreement. In
connection with the sale of stock during 2005, BAL was no longer a related party as of and subsequent to
December 31, 2005.
16. Consolidating Guarantor and Non-Guarantor Financial Information
The following consolidating financial information presents balance sheets, statements of operations and cash
flow information related to our business. Each guarantor, as defined, is a direct or indirect wholly-owned subsidiary
and has fully and unconditionally guaranteed the subordinated notes issued by us, on a joint and several basis.
Separate financial statements and other disclosures concerning the guarantors have not been presented because
management believes that such information is not material to investors.
The parent company includes all of the wholly-owned subsidiaries accounted for under the equity method. The
guarantor and non-guarantor companies include the consolidated financial results of their wholly-owned subsid-
iaries accounted for under the equity method. All applicable corporate expenses have been allocated appropriately
among the guarantor and non-guarantor subsidiaries.
84
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED BALANCE SHEET
As of December 31, 2007
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
(In thousands)
Elimination
Consolidated
CURRENT ASSETS:
Cash and cash equivalents . . . . . . . . . $
Accounts receivable, net. . . . . . . . . . .
Inventories, net . . . . . . . . . . . . . . . . .
Prepaid expenses . . . . . . . . . . . . . . . .
Deferred income taxes . . . . . . . . . . . .
ASSETS
— $
—
—
—
—
1,349
242,842
58,757
3,175
15,223
$ 8,518
34,824
38,238
7,914
624
$
(169,979)
(610)
5,419
(2,858)
— $ 9,867
107,687
96,385
16,508
12,989
Total current assets. . . . . . . . . . . . .
—
321,346
90,118
(168,028)
243,436
PROPERTY, PLANT AND
EQUIPMENT, net . . . . . . . . . . . . . . .
INVESTMENT IN SUBSIDIARIES. . . .
GOODWILL . . . . . . . . . . . . . . . . . . . . .
INTANGIBLE ASSETS, net . . . . . . . . .
OTHER ASSETS, net . . . . . . . . . . . . . .
DEFERRED INCOME TAXES . . . . . . .
—
417,428
—
—
—
—
85,817
(100,082)
113,787
83,800
8,631
4,172
12,441
45,502
37,402
13,775
—
3,323
—
(362,848)
—
—
—
(7,495)
98,258
—
151,189
97,575
8,631
—
TOTAL ASSETS . . . . . . . . . . . . . . . . $417,428
$ 517,471
$202,561
$(538,371)
$599,089
LIABILITIES AND STOCKHOLDERS’ INVESTMENT
CURRENT LIABILITIES:
Current maturities of long-term debt . . $
Accounts payable . . . . . . . . . . . . . . . .
Accrued liabilities . . . . . . . . . . . . . . .
— $
—
—
116
220,923
21,128
Total current liabilities . . . . . . . . . .
LONG-TERM DEBT, net . . . . . . . . . . .
DEFERRED TAX LIABILITIES . . . . . .
OTHER LONG-TERM LIABILITIES . .
—
—
—
—
Total liabilities . . . . . . . . . . . . . . . .
STOCKHOLDERS’ INVESTMENT. . . .
—
417,428
TOTAL LIABILITIES AND
STOCKHOLDERS’
INVESTMENT . . . . . . . . . . . . . . . $417,428
242,167
159,581
35,387
7,614
444,749
72,722
$
—
42,089
9,426
51,515
25,744
(816)
13,191
89,634
112,927
$
— $
(169,979)
2,561
(167,418)
(25,716)
(7,495)
—
(200,629)
(337,742)
116
93,033
33,115
126,264
159,609
27,076
20,805
333,754
265,335
$ 517,471
$202,561
$(538,371)
$599,089
85
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF OPERATIONS
For the Year Ended December 31, 2007
Parent
Company
Guarantor
Companies
REVENUES . . . . . . . . . . . . . . . . . . . . . .
COST OF REVENUES . . . . . . . . . . . . . .
$—
—
$526,588
475,273
Non-Guarantor
Companies
(In thousands)
$182,737
156,065
Elimination
Consolidated
$(12,539)
(11,193)
$696,786
620,145
Gross Profit . . . . . . . . . . . . . . . . . . . . .
SELLING, GENERAL AND
ADMINISTRATIVE EXPENSES . . . . .
AMORTIZATION EXPENSE . . . . . . . . . .
RESTRUCTURING COSTS . . . . . . . . . . .
Operating Income . . . . . . . . . . . . . . . . .
OTHER (INCOME) EXPENSE . . . . . . . .
INTEREST EXPENSE (INCOME) . . . . . .
LOSS ON EARLY EXTINGUISHMENT
OF DEBT. . . . . . . . . . . . . . . . . . . . . . .
(Loss) Income Before Provision for
Income Taxes . . . . . . . . . . . . . . . . . .
BENEFIT FOR INCOME TAXES . . . . . .
—
—
—
—
—
—
—
—
—
—
51,315
26,672
(1,346)
76,641
40,885
412
1,433
8,585
(573)
14,212
15,567
482
—
10,623
9,934
(65)
(959)
—
—
(387)
—
—
55,493
894
1,433
18,821
9,361
14,147
24
125
—
149
(5,078)
(207)
629
(1,378)
(387)
—
(4,836)
(1,585)
NET (LOSS) INCOME . . . . . . . . . . . . . .
$—
$ (4,871)
$
2,007
$
(387)
$ (3,251)
86
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF CASH FLOWS
For the Year Ended December 31, 2007
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
(In thousands)
Elimination
Consolidated
$—
$ (4,871)
$ 2,007
$
(387)
$ (3,251)
CASH FLOWS FROM OPERATING
ACTIVITIES:
Net (loss) income . . . . . . . . . . . . . . . . . . . . .
Adjustments to reconcile net income to net
cash provided by operating activities:
Depreciation and amortization . . . . . . . . . .
Noncash amortization of debt financing
costs . . . . . . . . . . . . . . . . . . . . . . . . . .
Loss on early extinguishment of debt . . . . .
Share-based compensation expense . . . . . . .
Loss on sale of assets . . . . . . . . . . . . . . . .
Deferred income tax provision . . . . . . . . . .
Noncash loss on forward exchange
contracts . . . . . . . . . . . . . . . . . . . . . . .
Change in other operating items . . . . . . . . .
Net cash provided by operating
activities . . . . . . . . . . . . . . . . . . . . . .
CASH FLOWS FROM INVESTING
ACTIVITIES:
Purchases of property, plant and equipment . . .
Proceeds from disposal/sale of property, plant
and equipment . . . . . . . . . . . . . . . . . . . . .
Proceeds from disposal/sale of other assets . . .
Post-acquisition and acquisitions payments,
net of cash received . . . . . . . . . . . . . . . . .
Other asset and liabilities . . . . . . . . . . . . . . .
Net cash (used in) provided by investing
activities . . . . . . . . . . . . . . . . . . . . . .
CASH FLOWS FROM FINANCING
ACTIVITIES:
Proceeds from issuance of common stock
under equity incentive plans. . . . . . . . . . . .
Purchases of treasury stock from employees . .
Excess tax benefit from equity incentive
plans . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repayment of revolving credit facility . . . . . .
Borrowings under revolving credit facility . . . .
Repayments of long-term borrowings . . . . . . .
Payments on capital lease obligations . . . . . . .
Other, net . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash provided by (used in) financing
activities . . . . . . . . . . . . . . . . . . . . . .
EFFECT OF CURRENCY EXCHANGE RATE
CHANGES ON CASH AND CASH
EQUIVALENTS . . . . . . . . . . . . . . . . . . . . .
NET (DECREASE) INCREASE IN CASH AND
CASH EQUIVALENTS . . . . . . . . . . . . . . . .
CASH AND CASH EQUIVALENTS:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13,191
839
24
3,084
(2)
13,482
—
2,800
3,234
20
125
—
(8)
(3,791)
9,967
7,474
28,547
19,028
(13,882)
(3,099)
382
—
167
—
—
—
—
—
—
—
—
387
—
—
—
—
16,425
859
149
3,084
(10)
9,691
9,967
10,661
47,575
(16,981)
549
—
(12,281)
(26,651)
(23,768)
124
—
25,716
(36,049)
(811)
(52,432)
(26,576)
25,716
(53,292)
464
(299)
(170)
(120,500)
130,000
—
(116)
—
—
—
—
(8,990)
33,237
(10,295)
(9)
—
—
—
—
—
(25,716)
—
—
—
464
(299)
(170)
(129,490)
137,521
(10,295)
(125)
—
9,379
13,943
(25,716)
(2,394)
(2,413)
570
(16,919)
6,965
—
—
—
—
(1,843)
(9,954)
19,821
9,867
$
Beginning of period . . . . . . . . . . . . . . . . . . .
End of period . . . . . . . . . . . . . . . . . . . . . . .
—
$—
18,268
1,349
$
1,553
$ 8,518
$
87
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED BALANCE SHEET
As of December 31, 2006
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
Elimination
Consolidated
(In thousands)
CURRENT ASSETS:
Cash and cash equivalents . . . . . . . . . . $
Accounts receivable, net . . . . . . . . . . .
Inventories, net . . . . . . . . . . . . . . . . . .
Prepaid expenses. . . . . . . . . . . . . . . . .
Deferred income taxes . . . . . . . . . . . .
ASSETS
— $ 18,268
148,244
—
66,337
—
6,984
—
11,570
—
$ 1,553
31,356
22,610
5,819
(2,751)
$
— $ 19,821
123,471
88,723
24,272
8,819
(56,129)
(224)
11,469
—
Total current assets . . . . . . . . . . . . .
—
251,403
58,587
(44,884)
265,106
PROPERTY, PLANT AND
EQUIPMENT, net. . . . . . . . . . . . . . . .
INVESTMENT IN SUBSIDIARIES . . . .
GOODWILL . . . . . . . . . . . . . . . . . . . . .
INTANGIBLE ASSETS, net . . . . . . . . . .
OTHER ASSETS, net . . . . . . . . . . . . . . .
DEFERRED INCOME TAXES . . . . . . . .
—
400,817
—
—
—
—
81,930
10,602
104,033
84,188
7,761
8,624
8,458
11,987
30,733
—
8,613
3,323
—
(423,406)
—
—
—
(11,947)
90,388
—
134,766
84,188
16,374
—
TOTAL ASSETS . . . . . . . . . . . . . . . . $400,817
$548,541
$121,701
$(480,237)
$590,822
CURRENT LIABILITIES:
LIABILITIES AND STOCKHOLDERS’ INVESTMENT
Current maturities of long-term debt . . $
Accounts payable . . . . . . . . . . . . . . . .
Accrued liabilities . . . . . . . . . . . . . . . .
— $
—
—
2,158
123,398
25,661
$
—
19,341
3,840
$
— $ 2,158
86,610
40,970
(56,129)
11,469
Total current liabilities. . . . . . . . . . .
LONG-TERM DEBT, net . . . . . . . . . . . .
DEFERRED TAX LIABILITIES . . . . . .
OTHER LONG-TERM LIABILITIES . . .
—
—
—
—
Total liabilities . . . . . . . . . . . . . . . .
STOCKHOLDERS’ INVESTMENT . . . .
—
400,817
151,217
148,156
23,374
15,556
338,303
210,238
23,181
11,800
(816)
10,056
44,221
77,480
(44,660)
—
(11,947)
—
(56,607)
(423,630)
129,738
159,956
10,611
25,612
325,917
264,905
TOTAL LIABILITIES AND
STOCKHOLDERS’
INVESTMENT . . . . . . . . . . . . $400,817
$548,541
$121,701
$(480,237)
$590,822
88
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF OPERATIONS
For the Year Ended December 31, 2006
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
(In thousands)
$134,978
112,738
Elimination
Consolidated
$(6,179)
(5,344)
$918,751
768,913
22,240
(835)
149,838
REVENUES . . . . . . . . . . . . . . . . . . . . . .
COST OF REVENUES . . . . . . . . . . . . . .
$—
—
Gross Profit . . . . . . . . . . . . . . . . . . . . .
SELLING, GENERAL AND
ADMINISTRATIVE EXPENSES . . . . .
AMORTIZATION EXPENSE . . . . . . . . . .
Operating Income . . . . . . . . . . . . . . . . .
OTHER EXPENSE (INCOME) . . . . . . . .
INTEREST EXPENSE (INCOME) . . . . . .
LOSS ON EARLY EXTINGUISHMENT
OF DEBT. . . . . . . . . . . . . . . . . . . . . . .
Income Before Provision for Income
Taxes . . . . . . . . . . . . . . . . . . . . . . . .
PROVISION FOR INCOME TAXES . . . .
—
—
—
—
—
—
—
—
—
$789,952
661,519
128,433
39,487
414
88,532
755
14,963
13,153
—
9,087
(4,223)
(134)
282
36
72,532
24,002
13,408
3,743
(690)
—
(145)
—
—
—
(145)
—
51,950
414
97,474
(3,468)
14,829
318
85,795
27,745
NET INCOME. . . . . . . . . . . . . . . . . . . . .
$—
$ 48,530
$
9,665
$ (145)
$ 58,050
89
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF CASH FLOWS
For the Year Ended December 31, 2006
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
Elimination Consolidated
(In thousands)
$—
$ 48,530
$ 9,665
$
(145)
$ 58,050
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income (loss) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustments to reconcile net income to net cash provided by
operating activities:
Depreciation and amortization . . . . . . . . . . . . . . . . . . . . . . .
Noncash amortization of debt financing costs . . . . . . . . . . . . .
Loss on early extinguishment of debt. . . . . . . . . . . . . . . . . . .
Share-based compensation expense . . . . . . . . . . . . . . . . . . . .
(Gain) loss on sale of assets . . . . . . . . . . . . . . . . . . . . . . . . .
Pension and post-retirement curtailment (gain) loss . . . . . . . . .
Deferred income tax provision . . . . . . . . . . . . . . . . . . . . . . .
Noncash gain on forward exchange contracts . . . . . . . . . . . . .
Change in other operating items . . . . . . . . . . . . . . . . . . . . . .
Net cash provided by operating activities . . . . . . . . . . . . . .
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of property, plant and equipment . . . . . . . . . . . . . . . .
Proceeds from disposal/sale of property, plant and equipment . . . .
Proceeds from disposal/sale of other assets . . . . . . . . . . . . . . . .
Post-acquisition and acquisitions payments, net of cash received . .
Other asset and liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash (used in) provided by investing activities . . . . . . . .
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from issuance of common stock under equity incentive
plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Purchases of treasury stock from employees . . . . . . . . . . . . . . . .
Excess tax benefit from equity incentive plans . . . . . . . . . . . . . .
Repayment of revolving credit facility . . . . . . . . . . . . . . . . . . . .
Borrowings under revolving credit facility . . . . . . . . . . . . . . . . .
Repayments of long-term borrowings . . . . . . . . . . . . . . . . . . . .
Long-term borrowings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Payments on capital lease obligations . . . . . . . . . . . . . . . . . . . .
Other, net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash (used in) provided by financing activities . . . . . . . .
EFFECT OF CURRENCY EXCHANGE RATE CHANGES ON
CASH AND CASH EQUIVALENTS . . . . . . . . . . . . . . . . . . . .
NET (DECREASE) INCREASE IN CASH AND CASH
EQUIVALENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CASH AND CASH EQUIVALENTS:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
12,906
855
282
2,006
(693)
(4,007)
7,616
—
(37,477)
30,018
(17,070)
332
2,032
(634)
(11,080)
(26,420)
2,140
(115)
645
(61,300)
61,300
(26,590)
—
(98)
—
(24,018)
2,077
40
36
—
28
142
1,801
(4,203)
(2,682)
6,904
(2,257)
20
—
(8,818)
(10,273)
(21,328)
—
—
—
(13,411)
11,098
(1,620)
—
(1)
20,123
—
—
—
—
—
—
—
—
145
—
—
—
—
—
20,123
20,123
—
—
—
—
—
—
—
—
(20,123)
14,983
895
318
2,006
(665)
(3,865)
9,417
(4,203)
(40,014)
36,922
(19,327)
352
2,032
(9,452)
(1,230)
(27,625)
2,140
(115)
645
(74,711)
72,398
(28,210)
—
(99)
—
16,189
(20,123)
(27,952)
(465)
(1,700)
(20,885)
65
—
—
—
—
(2,165)
(20,820)
40,641
$ 19,821
Beginning of period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End of period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
$—
39,153
1,488
$ 18,268
$ 1,553
$
90
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF OPERATIONS
For the Year Ended December 31, 2005
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
(In thousands)
$124,751
103,366
Elimination
Consolidated
$(3,995)
(3,544)
$754,481
620,031
21,385
(451)
134,450
(372)
—
(79)
—
—
—
(79)
—
(79)
44,564
358
89,528
(3,741)
13,195
1,525
78,549
29,138
$ 49,411
REVENUES . . . . . . . . . . . . . . . . . . . . . .
COST OF REVENUES . . . . . . . . . . . . . .
$—
—
Gross Profit . . . . . . . . . . . . . . . . . . . . .
SELLING, GENERAL AND
ADMINISTRATIVE EXPENSES . . . . .
AMORTIZATION EXPENSE . . . . . . . . . .
Operating Income . . . . . . . . . . . . . . . . .
OTHER INCOME . . . . . . . . . . . . . . . . . .
INTEREST EXPENSE . . . . . . . . . . . . . . .
LOSS ON EARLY EXTINGUISHMENT
OF DEBT. . . . . . . . . . . . . . . . . . . . . . .
Income Before Provision for Income
Taxes . . . . . . . . . . . . . . . . . . . . . . . . . .
PROVISION FOR INCOME TAXES . . . .
—
—
—
—
—
—
—
—
—
$633,725
520,209
113,516
32,909
358
80,249
(6)
11,742
12,027
—
9,358
(3,735)
1,453
1,525
—
66,988
25,199
11,640
3,939
NET INCOME. . . . . . . . . . . . . . . . . . . . .
$—
$ 41,789
$
7,701
$
91
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
CONDENSED CONSOLIDATED STATEMENT OF CASH FLOWS
For the Year Ended December 31, 2005
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income (loss) . . . . . . . . . . . . . . . . . . . . . . . .
Adjustments to reconcile net income to net cash
provided by operating activities:
Depreciation and amortization . . . . . . . . . . . . . .
Noncash amortization of debt financing costs . . .
Loss on early extinguishment of debt . . . . . . . . .
Share-based compensation expense . . . . . . . . . .
(Gain) loss on sale of assets . . . . . . . . . . . . . . .
Pension and post-retirement curtailment (gain) . .
Deferred income tax provision . . . . . . . . . . . . .
Noncash gain on forward exchange contracts . . .
Change in other operating items . . . . . . . . . . . .
Net cash provided by (used in) operating
activities . . . . . . . . . . . . . . . . . . . . . . . . .
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of property, plant and equipment . . . . . .
Post-acquisition and acquisitions payments, net of
cash received . . . . . . . . . . . . . . . . . . . . . . . . .
Other asset and liabilities . . . . . . . . . . . . . . . . . . .
Net cash used in investing activities. . . . . . . . . .
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from issuance of common stock . . . . . . .
Proceeds from issuance of common stock under
equity incentive plans . . . . . . . . . . . . . . . . . . .
Repayment of revolving credit facility . . . . . . . . . .
Borrowings under revolving credit facility . . . . . . .
Repayments of long-term borrowings . . . . . . . . . .
Long-term borrowings . . . . . . . . . . . . . . . . . . . . .
Proceeds from issuance of 8% senior notes . . . . . .
Payments on capital lease obligations . . . . . . . . . .
Other, net. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net cash provided by financing activities . . . . . .
EFFECT OF CURRENCY EXCHANGE RATE
CHANGES ON CASH AND CASH
EQUIVALENTS . . . . . . . . . . . . . . . . . . . . . . . . .
NET INCREASE IN CASH AND CASH
EQUIVALENTS . . . . . . . . . . . . . . . . . . . . . . . . .
CASH AND CASH EQUIVALENTS:
Beginning of period . . . . . . . . . . . . . . . . . . . . . .
End of period . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parent
Company
Guarantor
Companies
Non-Guarantor
Companies
(In thousands)
Elimination Consolidated
$—
$ 41,789
$ 7,701
$(79)
$ 49,411
10,300
750
1,354
—
(14)
(3,097)
5,134
—
6,236
1,764
98
171
—
7
—
2,114
(3,793)
(26,358)
62,452
(18,296)
(13,892)
(2,065)
(171,076)
(1,761)
(186,729)
225
—
(1,840)
43,914
—
1,887
(187,068)
187,068
(237,008)
227,459
150,000
(46)
(17,714)
168,492
(5,456)
38,759
—
(20,381)
19,710
(1,328)
—
—
—
22,054
20,055
567
486
394
1,002
—
—
—
—
—
—
—
—
79
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
12,064
848
1,525
—
(7)
(3,097)
7,248
(3,793)
(20,043)
44,156
(15,957)
(170,851)
(1,761)
(188,569)
43,914
1,887
(207,449)
206,778
(238,336)
227,459
150,000
(46)
4,340
188,547
(4,889)
39,245
1,396
$ 39,153
$ 1,488
$ —
$ 40,641
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
$—
92
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
17. Quarterly Financial Data (Unaudited):
The following is a condensed summary of actual quarterly results of operations for 2007 and 2006 (in
thousands, except per share amounts):
Revenues
Gross Profit
Operating
Income
Net Income
Basic Earnings
per Share
Diluted Earnings
per Share(1)
2007:
First. . . . . . . . . $198,801
Second . . . . . . $158,566
Third . . . . . . . . $160,918
Fourth . . . . . . . $178,501
2006:
First. . . . . . . . . $229,345
Second . . . . . . $234,787
Third . . . . . . . . $235,841
Fourth . . . . . . . $218,778
$26,269
$16,619
$17,819
$15,934
$38,734
$40,197
$40,797
$30,110
$10,612
$
752
$ 2,803
$ 4,654
$25,477
$26,847
$27,399
$17,751
$ 2,959
$ (231)
$ (2,682)
$ (3,297)
$13,408
$15,494
$18,006
$11,142
$ 0.14
$(0.01)
$(0.13)
$(0.15)
$ 0.64
$ 0.73
$ 0.85
$ 0.52
$ 0.14
$(0.01)
$(0.13)
$(0.15)
$ 0.62
$ 0.72
$ 0.84
$ 0.51
(1) See Note 13 for discussion on the computation of diluted shares outstanding.
The sum of the per share amounts for the quarters does not equal the total for the year due to the application of
the treasury stock methods.
18. Subsequent Events:
On March 11, 2008, we finalized the sale of our facility in Seattle, Washington which was primarily used for
manufacturing operations. The closure of this facility was previously announced on May 22, 2007.
93
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
There were no changes in or disagreements with our independent accountants on matters of accounting and
financial disclosures.
Item 9A. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Based on their evaluation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and
15d-15(e) under the Exchange Act) as of December 31, 2007, our chief executive officer and chief financial officer
have concluded that our disclosure controls and procedures are designed to ensure that information required to be
disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and
reported within the time periods specified in the SEC’s rules and forms and were effective.
94
Management’s Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial
reporting. Internal control over financial reporting is defined in Rules 13a-15(f) and 15d-15(f) promulgated under
the Exchange Act as a process designed by, or under the supervision of our principal executive and principal
financial officers and effected by our board of directors, management and other personnel, to provide reasonable
assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles in the United States. Such internal control
includes those policies and procedures that:
(cid:129) Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions
and dispositions of the assets;
(cid:129) Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial
statements in accordance with generally accepted accounting principles, and that receipts and expenditures
of the company are being made only in accordance with authorizations of management and directors; and
(cid:129) Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or
disposition of our assets that could have a material effect on the financial statements.
Our management assessed the effectiveness of our internal control over financial reporting as of December 31,
2007. In making this assessment, it used the criteria set forth in Internal Control — Integrated Framework issued by
the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this assessment,
management has determined that, as of December 31, 2007, our internal control over financial reporting is effective
based on those criteria.
Management’s assessment of the effectiveness of our internal control over financial reporting as of Decem-
ber 31, 2007 has been audited by Deloitte and Touche LLP, an independent registered public accounting firm, as
stated in their report which appears in this Annual Report on Form 10-K.
/s/ Mervin Dunn
Mervin Dunn
Chief Executive Officer
March 13, 2008
/s/ Chad M. Utrup
Chad M. Utrup
Chief Financial Officer
95
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of
Commercial Vehicle Group, Inc.
We have audited the internal control over financial reporting of Commercial Vehicle Group, Inc. and
subsidiaries (the “Company”) as of December 31, 2007, based on criteria established in Internal Control —
Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. The
Company’s management is responsible for maintaining effective internal control over financial reporting and for its
assessment of the effectiveness of internal control over financial reporting, included in the accompanying
Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion
on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board
(United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about
whether effective internal control over financial reporting was maintained in all material respects. Our audit
included obtaining an understanding of internal control over financial reporting, assessing the risk that a material
weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the
assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe
that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed by, or under the supervision of, the
company’s principal executive and principal financial officers, or persons performing similar functions, and
effected by the company’s board of directors, management, and other personnel to provide reasonable assurance
regarding the reliability of financial reporting and the preparation of consolidated financial statements for external
purposes in accordance with generally accepted accounting principles. A company’s internal control over financial
reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable
detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide
reasonable assurance that transactions are recorded as necessary to permit preparation of consolidated financial
statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the
company are being made only in accordance with authorizations of management and directors of the company; and
(3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or
disposition of the company’s assets that could have a material effect on the consolidated financial statements.
Because of the inherent limitations of internal control over financial reporting, including the possibility of
collusion or improper management override of controls, material misstatements due to error or fraud may not be
prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal
control over financial reporting to future periods are subject to the risk that the controls may become inadequate
because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial
reporting as of December 31, 2007, based on the criteria established in Internal Control — Integrated Framework
issued by the Committee of Sponsoring Organizations of the Treadway Commission.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board
(United States), the consolidated financial statements and financial statement schedules as of and for the year ended
December 31, 2007 of the Company and our report dated March 13, 2008 expressed an unqualified opinion on those
consolidated financial statements and financial statement schedules and included an explanatory paragraph that as
discussed in Note 9 to the consolidated financial statements effective January 1, 2007, the Company changed the
manner in which it accounts for uncertain income tax provisions.
/s/ Deloitte & Touche LLP
Minneapolis, Minnesota
March 13, 2008
96
Changes in Internal Control Over Financial Reporting
No change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under
the Exchange Act) occurred during the fiscal quarter ended December 31, 2007 that has materially affected, or is
reasonably likely to materially affect, our internal control over financial reporting.
Item 9B. Other Information
None.
PART III
Item 10. Directors, Executive Officers and Corporate Governance
A. Directors of the Registrant
The following table sets forth certain information with respect to our current directors as of December 31,
2007:
Name
Age
Principal Position(s)
Scott D. Rued . . . . . . . . . . . . . . . . . . . .
Mervin Dunn. . . . . . . . . . . . . . . . . . . . .
Scott C. Arves. . . . . . . . . . . . . . . . . . . .
David R. Bovee . . . . . . . . . . . . . . . . . . .
Robert C. Griffin . . . . . . . . . . . . . . . . . .
S.A. Johnson . . . . . . . . . . . . . . . . . . . . .
Richard A. Snell . . . . . . . . . . . . . . . . . .
President, Chief Executive Officer and Director
51 Chairman and Director
54
51 Director
58 Director
59 Director
67 Director
66 Director
The following biographies describe the business experience of our directors:
Scott D. Rued has served as a Director since February 2001 and Chairman since April 2002. Since August
2003, Mr. Rued has served as a Managing Partner of Thayer Capital Partners (“Thayer”). Prior to joining Thayer,
Mr. Rued served as President and Chief Executive Officer of Hidden Creek Industries (“Hidden Creek”) from May
2000 to August 2003. From January 1994 through April 2000, Mr. Rued served as Executive Vice President and
Chief Financial Officer of Hidden Creek.
Scott C. Arves has served as a Director since July 2005. Since January 2007, Mr. Arves has served as President
and Chief Executive Officer of Transport America, a truckload, intermodal and logistics services provider. Prior to
joining Transport America, Mr. Arves was President of Transportation for Schneider National, Inc., a provider of
transportation, logistics and related services, from May 2000 to July 2006.
David R. Bovee has served as a Director since October 2004. Mr. Bovee served as Vice President and Chief
Financial Officer of Dura Automotive Systems, Inc. (“Dura”) from January 2001 to March 2005 and from
November 1990 to May 1997. In October 2006, when Mr. Bovee was no longer affiliated with that company, Dura
filed a voluntary petition for reorganization under the federal bankruptcy laws. From May 1997 until January 2001,
Mr. Bovee served as Vice President of Business Development. Mr. Bovee also served as Assistant Secretary for
Dura. Prior to joining Dura, Mr. Bovee served as Vice President at Wickes in its Automotive Group from 1987 to
1990.
Robert C. Griffin has served as a Director since July 2005. Mr. Griffin has held numerous positions of
responsibility in the financial sector, including Head of Investment Banking, Americas and Management Com-
mittee Member for Barclay’s Capital from 2000 to 2002, and prior to that as the Global Head of Financial Sponsor
Coverage for Bank of America Securities from 1998 to 2000 and Group Executive Vice President of Bank of
America from 1997 to 1998. Mr. Griffin also currently serves as a Director of Builders FirstSource, Inc. and Sunair
Services Corporation.
97
S.A. (“Tony”) Johnson has served as a Director since September 2000. Mr. Johnson is currently a Managing
Partner of OG Partners, a private industrial management company, and has served in that capacity since 2004.
Mr. Johnson served as the Chairman of Hidden Creek from May 2001 to May 2004 and from 1989 to May 2001 was
its Chief Executive Officer and President. Prior to forming Hidden Creek, Mr. Johnson served from 1985 to 1989 as
Chief Operating Officer of Pentair, Inc., a diversified industrial company. Mr. Johnson also currently serves as a
Director of Cooper-Standard Automotive, Inc.
Richard A. Snell has served as a Director since August 2004. Mr. Snell has served as Chairman and Chief
Executive Officer of Qualitor, Inc. since May 2005 and as an Operating Partner at Thayer Capital Partners since
2003. Prior to joining Thayer Capital Partners, Mr. Snell was a consultant from 2000 to 2003 and prior thereto,
served as Chairman and Chief Executive Officer of Federal-Mogul Corporation, an automotive parts manufacturer,
from 1996 to 2000. Prior to joining Federal-Mogul Corporation, Mr. Snell served as Chief Executive Officer at
Tenneco Automotive, also an automotive parts manufacturer. Mr. Snell also currently serves as a Director of
Schneider National, Inc.
B. Executive Officers
The following table sets forth certain information with respect to our current executive officers as of
December 31, 2007:
Name
Age
Principal Position(s)
Gerald L. Armstrong . . . . . . . . . . . . . . .
W. Gordon Boyd . . . . . . . . . . . . . . . . . .
Mervin Dunn. . . . . . . . . . . . . . . . . . . . .
Kevin R.L. Frailey . . . . . . . . . . . . . . . . .
Chad M. Utrup . . . . . . . . . . . . . . . . . . .
James F. Williams . . . . . . . . . . . . . . . . .
President — CVG Global Truck
46
President — CVG Global Construction
60
54
President, Chief Executive Officer and Director
41 Executive Vice President of Business Development
35 Chief Financial Officer
61 Vice President of Human Resources
The following biographies describe the business experience of our executive officers:
Gerald L. Armstrong has served as President — CVG Global Truck since November 2006. From April 2004 to
November 2006, Mr. Armstrong served as President — CVG Americas and from July 2002 to April 2004 as Vice
President and General Manager of National Seating and KAB North America. Prior to joining us, Mr. Armstrong
served from 1995 to 2000 and from 2000 to July 2002 as Vice President and General Manager, respectively, of
Gabriel Ride Control Products, a manufacturer of shock absorbers and related ride control products for the
automotive and light truck markets, and a wholly-owned subsidiary of ArvinMeritor Inc. Mr. Armstrong began his
service with ArvinMeritor Inc., a manufacturer of automotive and commercial vehicle components, modules and
systems in 1987, and served in various positions of increasing responsibility within its light vehicle original
equipment and aftermarket divisions before starting at Gabriel Ride Control Products. Prior to 1987, Mr. Armstrong
held various positions of increasing responsibility including Quality Engineer and Senior Quality Supervisor and
Quality Manager with Schlumberger Industries and Hyster Corporation.
W. Gordon Boyd has served as President — CVG Global Construction since November 2006. From June 2005
to November 2006, Mr. Boyd served as President — CVG International and prior thereto served as our President —
Mayflower Vehicle Systems from the time we completed the acquisition of Mayflower in February 2005. Mr. Boyd
joined Mayflower Vehicle Systems U.K. as Manufacturing Director in 1993. In 2002, Mr. Boyd became President
and Chief Executive Officer of MVS, Inc.
Mervin Dunn has served as a Director since August 2004 and as our President and Chief Executive Officer
since June 2002, and prior thereto served as the President of Trim Systems, commencing upon his joining us in
October 1999. From 1998 to 1999, Mr. Dunn served as the President and Chief Executive Officer of Bliss
Technologies, a heavy metal stamping company. From 1988 to 1998, Mr. Dunn served in a number of key leadership
roles at Arvin Industries, including Vice President of Operating Systems (Arvin North America), Vice President of
Quality, and President of Arvin Ride Control. From 1985 to 1988, Mr. Dunn held several key management positions
in engineering and quality assurance at Johnson Controls Automotive Group, an automotive trim company,
including Division Quality Manager. From 1980 to 1985, Mr. Dunn served in a number of management positions for
98
engineering and quality departments of Hyster Corporation, a manufacturer of heavy lift trucks. Mr. Dunn also
currently serves as a director of Transdigm Group, Inc.
Kevin R.L. Frailey has served as Executive Vice President of Business Development since February 2007. Prior
to joining us, Mr. Frailey served as General Manager for Joint Ventures and Business Strategy at ArvinMeritor’s
Emissions Technologies Group from 2003 to early 2007. From 1988 to 2007, Mr. Frailey held several key
management positions in engineering, sales and worldwide supplier development at ArvinMeritor. In addition,
during that time Mr. Frailey served on the board of various joint ventures, most notably those of Arvin Sango, Inc.,
and AD Tech Co., Ltd.
Chad M. Utrup has served as the Chief Financial Officer since January 2003, and prior thereto served as the
Vice President of Finance at Trim Systems since 2000. Prior to joining us in February 1998, Mr. Utrup served as a
project management group member at Electronic Data Systems. While with Electronic Data Systems, Mr. Utrup’s
responsibilities included financial support and implementing cost recovery and efficiency programs at various
Delphi Automotive Systems support locations.
James F. Williams has served as the Vice President of Human Resources since August 1999. Prior to joining us,
Mr. Williams served as Corporate Vice President of Human Resources and Administration for SPECO Corporation
from January 1996 to August 1999. From April 1984 to January 1996, Mr. Williams served in various key human
resource management positions in General Electric’s Turbine, Lighting and Semi Conductor business. In addition,
Mr. Williams served as Manager of Labor Relations and Personnel Services at Mack Trucks’ Allentown Corporate
location from 1976 to 1984.
There are no family relationships between any of our directors or executive officers.
C. Section 16(a) Beneficial Ownership Reporting Compliance
The information required by Item 10 with respect to compliance with reporting requirements is incorporated
herein by reference to the section labeled “Section 16(a) Beneficial Ownership Reporting Compliance” which
appears in CVG’s 2008 Proxy Statement.
Item 11. Executive Compensation
The information required by Item 11 is incorporated herein by reference to the sections labeled “Director
Compensation” and “Executive Compensation and Other Matters” which appear in CVG’s 2008 Proxy Statement
excluding information under the headings “Compensation Discussion and Analysis.”
99
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder
Matters
Options to purchase common shares of our common stock have been granted to certain of our executives and
key employees under our amended and restated equity incentive plan and our management stock option plan. The
following table summarizes the number of stock options granted, net of forfeitures and exercises, and shares of
restricted stock awarded and issued, net of forfeitures and shares on which restrictions have lapsed, the weighted-
average exercise price of such stock options and the number of securities remaining to be issued under all
outstanding equity compensation plans as of December 31, 2007:
Number of Securities to be
Issued upon Exercise of
Outstanding Options,
Warrants and Rights(1)
Weighted-Average
Exercise Price of
Outstanding
Options, Warrants
and Rights
Number of
Securities
Remaining Available
for Future Issuance
Under Equity
Compensation Plans
Equity compensation plans
approved by security holders:
Amended and Restated Equity
Incentive Plan
Stock Options . . . . . . . . . . . .
Restricted Stock . . . . . . . . . . .
Management Stock Option
492,184
520,165
Plan . . . . . . . . . . . . . . . . . . . .
228,411
Equity compensation plans not
approved by stockholders . . . . . .
—
Total . . . . . . . . . . . . . . . . . . .
1,240,760
$15.84
—
$ 5.54
—
$12.03
(2)
(2)
—
—
798,598
(1) In connection with our merger with Trim Systems, Inc., options to purchase shares of Trim Systems, Inc.’s
common stock were converted into options to purchase shares of our common stock. Of these, options to
purchase an aggregate of 28,951 shares at a weighted-average exercise price of $9.43 per share were
outstanding at December 31, 2006. These options are not included in the table.
(2) 798,598 shares are available for future issuance under our Second Amended and Restated Equity Incentive
Plan.
The information required by Item 12 is incorporated herein by reference to the sections labeled “Security
Ownership of Certain Beneficial Owners and Management” and “Employee Benefit Plans,” which appear in CVG’s
2008 Proxy Statement.
Item 13. Certain Relationships, Related Transactions and Director Independence
The information required by Item 13 is incorporated herein by reference to the section labeled “Certain
Relationships and Related Transactions” and “Proposal No. 1 — Election of Directors — Director Independence”
which appears in CVG’s 2008 Proxy Statement.
Item 14. Principal Accountant Fees and Services
The information required by Item 14 is incorporated herein by reference to the section labeled “Principal
Accountant Fees and Services” which appears in CVG’s 2008 Proxy Statement.
100
PART IV
Item 15. Exhibits and Financial Statements Schedules
(1) LIST OF FINANCIAL STATEMENT SCHEDULES
The following financial statement schedules of the Corporation and its subsidiaries are included herein:
Schedule II — Valuation and Qualifying Accounts and Reserves.
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
SCHEDULE II: VALUATION AND QUALIFYING ACCOUNTS
December 31, 2007, 2006 and 2005
Allowance for Doubtful Accounts:
The transactions in the allowance for doubtful account for the years ended December 31 were as follows (in
thousands):
2007
2006
2005
Balance — Beginning of the year . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acquisition recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Provisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Currency translation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 5,536
105
5,076
(6,915)
(44)
$ 6,087
119
4,246
(4,963)
47
$ 2,681
1,524
4,287
(2,194)
(211)
Balance — End of the year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 3,758
$ 5,536
$ 6,087
Additional Purchase Liabilities Recorded in Conjunction with Acquisitions:
The transactions in the purchase liabilities account recorded in conjunction with acquisitions for the years
ended December 31 were as follows (in thousands):
Balance — Beginning of the year . . . . . . . . . . . . . . . . . . . . . . . . . . .
Provisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
247
—
(141)
$
317
—
(70)
$
423
—
(106)
Balance — End of the year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
106
$
247
$
317
2007
2006
2005
Facility Closure and Consolidation Costs:
The transactions in the facility closure and consolidation costs account for the years ended December 31 were
as follows (in thousands):
Balance — Beginning of the year . . . . . . . . . . . . . . . . . . . . . . . . . . .
Provisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Utilizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
60
810
(224)
$ 2,013
—
(1,953)
$
278
2,013
(278)
Balance — End of the year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
646
$
60
$ 2,013
2007
2006
2005
All other schedules for which provision is made in the applicable accounting regulations of the SEC are not
required under the related instructions or are inapplicable and, therefore, have been omitted.
101
(2) LIST OF EXHIBITS
The following exhibits are either included in this report or incorporated herein by reference as indicated below:
Exhibit No.
EXHIBIT INDEX
Description
2.1
2.2
2.3
3.1
3.2
4.1
4.2
4.3
4.4
4.5
4.6
10.1
10.2
Agreement of Purchase and Sale, dated February 7, 2004, by and among, CVG Acquisition LLC,
Mayflower Vehicle Systems, Inc., Mayflower Vehicle Systems Michigan, Inc., Wayne Stamping and
Assembly LLC and Wayne-Orrville Investments LLC (incorporated by reference to the Company’s
annual report on Form 10-K (File No. 000-50890), filed on March 15, 2005).
Stock Purchase Agreement, dated as of June 3, 2005, by and between Monona Holdings LLC and
Commercial Vehicle Group, Inc. (incorporated by reference to the Company’s current report on
Form 8-K (File No. 000-50890), filed on June 8, 2005).
Stock Purchase Agreement, dated as of August 8, 2005, by and between Trim Systems, Inc. Cabarrus
Plastics, Inc. and the Shareholders listed therein (incorporated by reference to the Company’s current
report on Form 8-K (File No. 000-50890) filed on August 12, 2005).
Amended and Restated Certificate of Incorporation of Commercial Vehicle Group, Inc. (incorporated
by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on
September 17, 2004).
Amended and Restated By-laws of Commercial Vehicle Group, Inc. (incorporated by reference to the
Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
Indenture, dated July 6, 2005, among the Company, the subsidiary guarantors party thereto and U.S.
Bank National Association, as Trustee, with respect to 8.0% senior notes due 2013 (incorporated herein
by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on July 8, 2005).
Supplemental Indenture, dated as of August 10, 2005, by and among the Company, Cabarrus Plastics,
Inc., the subsidiary guarantors party thereto and U.S. Bank National Association (incorporated by
reference to the Company’s current report on Form 8-K (File No. 000-50890) filed on August 12,
2005).
Supplemental Indenture, dated as of November 10, 2006, among the Company, CVG European
the subsidiary guarantors party thereto and U.S. Bank National Association
Holdings, LLC,
(incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890),
filed on March 13, 2007).
Supplemental Indenture, dated as of November 28, 2007, among the Company, CVG Oregon, LLC, the
subsidiary guarantors party thereto and U.S. Bank National Association.
Registration Rights Agreement, dated July 6, 2005, among the Company, the subsidiary guarantors
party thereto and the purchasers named therein (incorporated herein by reference to the Company’s
current report on Form 8-K (File No. 000-50890), filed on July 8, 2005).
Form of senior note (attached as exhibit to Exhibit 4.1).
Revolving Credit and Term Loan Agreement, dated as of August 10, 2004, by and among Commercial
Vehicle Group, Inc., the subsidiary borrowers from time to time parties thereto, the foreign currency
borrowers from time to time parties thereto, the banks from time to time parties hereto, U.S. Bank
National Association, one of the banks, as administrative agent for the banks and Comerica Bank, one
of the banks, as syndication agent for the banks (incorporated by reference to the Company’s quarterly
report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
First Amendment to Revolving Credit and Term Loan Agreement, dated as of September 16, 2004, by
and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties
thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to time
parties hereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks
and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to
the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 15, 2005).
102
Exhibit No.
10.3
10.4
10.5
10.6
10.7
10.8
10.9
10.10
Description
Second Amendment to Revolving Credit and Term Loan Agreement, dated as of February 7, 2005, by
and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties
thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to time
parties hereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks
and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to
the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 15, 2005).
Third Amendment to Revolving Credit and Term Loan Agreement, dated as of June 3, 2005, by and
among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties thereto, the
foreign currency borrowers from time to time parties thereto, the banks from time to time parties
thereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks and
Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to the
Company’s current report on Form 8-K (File No. 000-50890), filed on June 8, 2005).
Fourth Amendment to Revolving Credit and Term Loan Agreement, dated as of June 29, 2005, by and
among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties thereto, the
foreign currency borrowers from time to time parties thereto, the banks from time to time parties
thereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks and
Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to the
Company’ s current report on Form 8-K (File No. 000-50890), filed on July 6, 2005).
Fifth Amendment to Revolving Credit and Term Loan Agreement, dated as of July 12, 2005, by and
among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties thereto, the
foreign currency borrowers from time to time parties thereto, the banks from time to time parties
thereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks, and
Comerica Bank one of the banks, as syndication agent for the banks (incorporated by reference to the
Company’s current report on Form 8-K (File No. 000-50890), filed on July 14, 2005).
Sixth Amendment to Revolving Credit and Term Loan Agreement, dated as of December 30, 2005, by
and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties
thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to time
parties thereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks,
and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to
the Company’s current report on Form 8-K (File No. 000-50890), filed on January 1, 2006).
Waiver and Seventh Amendment to Revolving Credit and Term Loan Agreement, dated as of March 26,
2007, by and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time
parties thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to
time parties thereto, U.S. Bank National Association, one of the banks, as administrative agent for the
banks, and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by
reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on August 3,
2007).
Eighth Amendment to Revolving Credit and Term Loan Agreement, dated as of June 26, 2007, by and
among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties thereto, the
foreign currency borrowers from time to time parties thereto, the banks from time to time parties
thereto, U.S. Bank National Association, one of the banks, as administrative agent for the banks, and
Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by reference to the
Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on August 3, 2007).
Amendment and Waiver Letter to Revolving Credit and Term Loan Agreement, dated as of August 16,
2007, by and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time
parties thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to
time parties thereto, U.S. Bank National Association, one of the banks, as administrative agents for the
banks, and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by
reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on October 1,
2007).
103
Exhibit No.
10.11
10.12
10.13
10.14
10.15*
10.16*
10.17*
10.18*
10.19*
10.20
10.21
10.22
10.23
10.24*
Description
Tenth Amendment to Revolving Credit and Term Loan Agreement, dated as of September 28, 2007, by
and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties
thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to time
parties thereto, U.S. Bank National Association, one of the banks, as administrative agents for the
banks, and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by
reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on October 1,
2007).
Eleventh Amendment to Revolving Credit and Term Loan Agreement, dated as of March 10, 2008, by
and among Commercial Vehicle Group, Inc., the subsidiary borrowers from time to time parties
thereto, the foreign currency borrowers from time to time parties thereto, the banks from time to time
parties thereto, U.S. Bank National Association, one of the banks, as administrative agents for the
banks, and Comerica Bank, one of the banks, as syndication agent for the banks (incorporated by
reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on March 14,
2008).
Note Purchase Agreement, dated September 30, 2002, by and among Bostrom Holding, Inc., Baird
Capital Partners II Limited, BCP II Affiliates Fund Limited Partnership, Baird Capital II Limited
Partnership, Baird Capital Partners III Limited Partnership, BCP III Special Affiliates Limited
Partnership, BCP III Affiliates Fund Limited Partnership, Norwest Equity Partners VII, LP and
Hidden Creek Industries (incorporated by reference to the Company’s registration statement on
Form S-1 (File No. 333-15708), filed on May 21, 2004).
Form of Subordinated Promissory Note issued by Bostrom Holding, Inc. in favor of each of BCP II
Affiliates Fund Limited Partnership, Baird Capital II Limited Partnership, Baird Capital Partners III
Limited Partnership, BCP III Special Affiliates Limited Partnership BCP III Affiliates Fund Limited
Partnership, Norwest Equity Partners VII, LP and Hidden Creek Industries (incorporated by reference
to the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).
Bostrom Holding, Inc. Management Stock Option Plan (incorporated by reference to the Company’s
registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).
Form of Grant of Nonqualified Stock Option pursuant to the Bostrom Holding, Inc. Management Stock
Option Plan (incorporated by reference to the Company’s registration statement on Form S-1 (File
No. 333-15708), filed on May 21, 2004).
Commercial Vehicle Group, Inc. Amended and Restated Equity Incentive Plan (incorporated by
reference to the Company’s quarterly report on Form 10-Q (File No. 000-59890), filed on May 11,
2005).
Commercial Vehicle Group, Inc. Second Amended and Restated Equity Incentive Plan (incorporated
by reference to the Company’s current report on Form 8-K (File No. 000-50890) filed on May 25,
2007).
Form of Grant of Nonqualified Stock Option pursuant to the Commercial Vehicle Group, Inc.
Amended and Restated Equity Incentive Plan (incorporated by reference to the Company’s annual
report on Form 10-K (File No. 000-50890), filed on March 15, 2005).
Form of Non-Competition Agreement (incorporated by reference to the Company’s registration
statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).
Registration Agreement, dated October 5, 2000, by and among Bostrom Holding, Inc. and the investors
listed on Schedule A attached thereto (incorporated by reference to the Company’s registration
statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).
Joinder to Registration Agreement, dated as of March 28, 2003, by and among Bostrom Holding, Inc.
and J2R Partners VI, CVS Partners, LP and CVS Executive Investco LLC (incorporated by reference to
the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21,2004).
Joinder to the Registration Agreement, dated as of May 20, 2004, by and among Commercial Vehicle
Group, Inc. and the prior stockholders of Trim Systems (incorporated by reference to the Company’s
quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
Commercial Vehicle Group, Inc. 2007 Bonus Plan (incorporated by reference to the Company’s current
report on Form 8-K (File No. 000-50890), filed on March 9, 2007).
104
Exhibit No.
10.25*
10.26*
10.27*
10.28*
10.29*
10.30*
10.31*
10.32*
10.33*
10.34*
10.35*
10.36*
12.1
21.1
23.1
31.1
31.2
32.1
32.2
Description
Service Agreement, dated March 1, 1993, between Motor Panels (Coventry) Plc and William Gordon
Boyd (incorporated by reference to the Company’s registration statement on Form S-1 (File
No. 333-125626), filed on June 8, 2005).
Assignment and Assumption Agreement, dated as of June 1, 2004, between Mayflower Vehicle
Systems PLC and Mayflower Vehicle Systems, Inc. (incorporated by reference to the Company’s
registration statement on Form S-1 (File No. 333-125626), filed on June 8, 2005).
Form of Restricted Stock Agreement pursuant to the Commercial Vehicle Group, Inc. Amended and
Restated Equity Incentive Plan (incorporated by reference to amendment no. 1 to the Company’s
registration statement on Form S-4 (File No. 333-129368), filed on December 1, 2005).
Change in Control & Non-Competition Agreement dated April 5, 2006 with Mervin Dunn
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890),
filed on April 7, 2006).
Change in Control & Non-Competition Agreement dated April 5, 2006 with Gerald L. Armstrong
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on
April 7, 2006).
Change in Control & Non-Competition Agreement dated April 5, 2006 with Chad M. Utrup
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890),
filed on April 7, 2006).
Change in Control & Non-Competition Agreement dated April 5, 2006 with James F. Williams
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on
April 7, 2006).
Change in Control & Non-Competition Agreement dated May 22, 2007 with Kevin R.L. Frailey
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on
May 25, 2007).
Change in Control & Non-Competition Agreement dated May 22, 2007 with William Gordon Boyd
(incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on
May 25, 2007).
Deferred Compensation Plan (incorporated by reference to the Company’s quarterly report on
Form 10-Q (File No. 000-50890), filed on November 6, 2006).
Form of indemnification agreement with directors and executive officers.
Terms of employment for executive officers.
Computation of ratio of earnings to fixed charges.
Subsidiaries of Commercial Vehicle Group, Inc.
Consent of Deloitte & Touche LLP.
Certification by Mervin Dunn, President and Chief Executive Officer.
Certification by Chad M. Utrup, Chief Financial Officer.
Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of
2002.
Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of
2002.
* Management contract or compensatory plan or arrangement required to be filed as an exhibit to this annual
report on Form 10-K.
All other items included in an Annual Report on Form 10-K are omitted because they are not applicable or the
answers thereto are none.
105
Pursuant to the requirements of Section 13 of the Securities Exchange Act of 1934, the Registrant has duly
caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
SIGNATURES
COMMERCIAL VEHICLE GROUP, INC.
By: /s/ SCOTT D. RUED
Scott D. Rued
Chairman
Date: March 13, 2008
Pursuant to the requirements of the Securities Act of 1934, this report has been signed below by the following
persons on behalf of the Registrant and in the capacities and on the dates indicated.
Signature
Title
Date
/s/ SCOTT D. RUED
Scott D. Rued
/s/ MERVIN DUNN
Mervin Dunn
/s/ SCOTT C. ARVES
Scott C. Arves
/s/ DAVID R. BOVEE
David R. Bovee
/s/ ROBERT C. GRIFFIN
Robert C. Griffin
/s/ S.A. JOHNSON
S.A. Johnson
/s/ RICHARD A. SNELL
Richard A. Snell
/s/ CHAD M. UTRUP
Chad M. Utrup
Chairman and Director
March 13, 2008
President, Chief Executive Officer (Principal
Executive Officer) and Director
March 13, 2008
Director
March 13, 2008
Director
March 13, 2008
Director
March 13, 2008
Director
March 13, 2008
Director
March 13, 2008
Chief Financial Officer (Principal
Financial and Accounting Officer)
March 13, 2008
106
CommerCial VehiCle Group, inC.
7800 Walton parkway|new albany, oh 43054
614.289.5360 | www.cvgrp.com