UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
☒
☐
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2022.
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to .
Commission file number: 1-11311
(Exact name of registrant as specified in its charter)
Delaware
(State or other jurisdiction of
incorporation or organization)
13-3386776
(I.R.S. Employer
Identification No.)
21557 Telegraph Road, Southfield, MI 48033
(Address of principal executive offices)
(248) 447-1500
(Registrant's telephone number including area code)
Title of each class
Common Stock, par value $0.01 per share
Securities registered pursuant to Section 12(b) of the Act:
Trading Symbol(s)
LEA
Name of each exchange on which registered
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Act during the preceding 12 months (or
for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90
days. Yes ☒ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of
Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such
files). Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an
emerging growth company. See definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and "emerging growth company" in
Rule 12b-2 of the Exchange Act.
Large accelerated filer
Non-accelerated filer
Emerging growth company
☒
☐
☐
Accelerated filer ☐
Smaller reporting company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or
revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control
over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its
audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒
As of July 2, 2022, the aggregate market value of the registrant's common stock, par value $0.01 per share, held by non-affiliates of the registrant was
$7,507,492,498. The closing price of the common stock on July 2, 2022, as reported on the New York Stock Exchange, was $126.74 per share.
As of February 6, 2023, the number of shares outstanding of the registrant's common stock was 59,130,153 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Certain sections of the registrant's Notice of Annual Meeting of Stockholders and Definitive Proxy Statement on Schedule 14A for its Annual Meeting of
Stockholders to be held in May 2023, as described in the Cross Reference Sheet and Table of Contents included herewith, are incorporated by reference into
Part III of this Report.
Table of Contents
ITEM 1.
ITEM 1A.
ITEM 1B.
ITEM 2.
ITEM 3.
ITEM 4.
SUPPLEMENTARY
ITEM.
ITEM 5.
ITEM 6.
ITEM 7.
ITEM 7A.
ITEM 8.
ITEM 9.
ITEM 9A.
ITEM 9B.
ITEM 9C.
ITEM 10.
ITEM 11.
ITEM 12.
ITEM 13.
ITEM 14.
ITEM 15.
ITEM 16.
LEAR CORPORATION AND SUBSIDIARIES
CROSS REFERENCE SHEET AND TABLE OF CONTENTS
Page Number
or Reference
PART I
Business ............................................................................................................................
Risk factors .......................................................................................................................
Unresolved staff comments ..............................................................................................
Properties ..........................................................................................................................
Legal proceedings .............................................................................................................
Mine safety disclosures ....................................................................................................
Information about our executive officers .........................................................................
PART II
Market for the Company's common equity, related stockholder matters and issuer
purchases of equity securities ...........................................................................................
Reserved ...........................................................................................................................
Management's discussion and analysis of financial condition and results of operations .
Quantitative and qualitative disclosures about market risk ..............................................
Consolidated financial statements and supplementary data .............................................
Changes in and disagreements with accountants on accounting and financial
disclosure ..........................................................................................................................
Controls and procedures ...................................................................................................
Other information .............................................................................................................
Disclosure regarding foreign jurisdictions that prevent inspections ................................
PART III (1)
Directors, executive officers and corporate governance (2) .............................................
Executive compensation (3) .............................................................................................
Security ownership of certain beneficial owners and management and related
stockholder matters (4) .....................................................................................................
Certain relationships and related transactions, and director independence (5) ................
Principal accounting fees and services (6) .......................................................................
PART IV
Exhibits and financial statement schedule ........................................................................
Form 10-K summary ........................................................................................................
3
20
27
27
28
28
29
31
32
33
51
52
102
102
102
103
104
104
104
105
105
105
105
________________________
(1)
Certain information is incorporated by reference, as indicated below, to the registrant's Definitive Proxy Statement on
Schedule 14A for its Annual Meeting of Stockholders to be held in May 2023 (the "Proxy Statement").
A portion of the information required is incorporated by reference to the Proxy Statement sections entitled "Election of
Directors" and "Directors and Corporate Governance."
Incorporated by reference to the Proxy Statement sections entitled "Directors and Corporate Governance — Director
Compensation," "Compensation Discussion and Analysis," "Executive Compensation," "Compensation Committee
Interlocks and Insider Participation" and "Compensation Committee Report."
A portion of the information required is incorporated by reference to the Proxy Statement section entitled "Directors
and Corporate Governance — Security Ownership of Certain Beneficial Owners, Directors and Management."
Incorporated by reference to the Proxy Statement sections entitled "Certain Relationships and Related Party
Transactions" and "Directors and Corporate Governance — Independence of Directors."
Incorporated by reference to the Proxy Statement section entitled "Fees of Independent Accountants."
(2)
(3)
(4)
(5)
(6)
Table of Contents
PART I
ITEM 1 – BUSINESS
In this Annual Report on Form 10-K (this "Report"), when we use the terms the "Company," "Lear," "we," "us" and "our,"
unless otherwise indicated or the context otherwise requires, we are referring to Lear Corporation and its consolidated
subsidiaries. A substantial portion of the Company's operations are conducted through subsidiaries controlled by Lear
Corporation. The Company is also a party to various joint venture arrangements. Certain disclosures included in this Report
constitute forward-looking statements that are subject to risks and uncertainties. See Item 1A, "Risk Factors," and Part II —
Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations — Forward-Looking
Statements."
BUSINESS OF THE COMPANY
General
Lear Corporation is a global automotive technology leader in Seating and E-Systems, enabling superior in-vehicle experiences
for consumers around the world. We supply complete seat systems, key seat components, complete electrical distribution and
connection systems, battery disconnect units and other electronic products to all of the world's major automotive manufacturers.
At Lear, we are Making every drive betterTM by providing technology for safer, smarter and more comfortable journeys, while
adhering to our values — Be Inclusive. Be Inventive. Get Results the Right Way.
We have 253 manufacturing, engineering and administrative locations in 37 countries. We continue to grow our business in all
automotive producing regions of the world, both organically and through complementary acquisitions. We continue to
restructure our manufacturing footprint to optimize our cost structure with 67% of our manufacturing facilities and 86% of our
employees located in low-cost countries.
Lear is built on a foundation and strong culture of innovation, operational excellence, and engineering and program
management capabilities. We use our product, design and technological expertise, as well as our global reach and competitive
manufacturing footprint, to achieve the following financial goals and objectives:
• Continue to deliver profitable growth, balancing risks and returns;
•
Invest in innovation to drive business growth and profitability;
• Maintain a strong balance sheet with investment grade credit metrics; and
• Consistently return capital to our stockholders.
Our business is organized under two reporting segments: Seating and E-Systems. Each of these segments has a varied product
and technology portfolio across a number of component categories. Further, we continuously evaluate this portfolio, aligning it
with industry trends while balancing risk-adjusted returns, which allows us to offer value-added solutions to our customers.
• Seating — Our Seating segment consists of the design, development, engineering and manufacture of complete seat
systems and key seat components. Our capabilities in operations and supply chain management enable synchronized
assembly and just-in-time delivery of complex complete seat systems at high volumes to our customers.
Included in our complete seat systems and components are our advanced comfort solutions, including thermal, safety and
wellness products, as well as configurable seating product technologies. All of these products are compatible with
traditional internal combustion engine ("ICE") architectures and electrified powertrains, including the full range of hybrid,
plug-in hybrid and battery electric architectures. Our advanced comfort solutions are facilitated by our seat system,
component and integration capabilities, together with our competencies in electronics, sensors, software and algorithms.
As the most vertically integrated global seat supplier, our key seat component product offerings include seat trim covers;
surface materials such as leather and fabric; seat mechanisms; seat foam; thermal comfort solutions such as seat massage,
lumbar, heat and ventilation products; and headrests.
• E-Systems — Our E-Systems segment consists of the design, development, engineering and manufacture of complete
electrical distribution and connection systems, battery disconnect units ("BDUs") and other electronic products. These
capabilities enable us to provide our customers with customizable solutions with optimized designs at competitive costs
for both low voltage and high voltage vehicle architectures.
Electrical distribution and connection systems utilize low voltage and high voltage wire, high-speed data cables and flat
wiring to connect networks and electrical signals and manage electrical power within the vehicle for all types of
powertrains – from traditional ICE architectures to the full range of electrified powertrains that require management of
higher voltage and power. Key components of our electrical distribution and connection systems portfolio include wire
harnesses, terminals and connectors, high voltage battery connection systems and engineered components. High voltage
3
Table of Contents
battery connection systems include intercell connect boards, bus bars and main battery connection systems. BDUs control
all electrical energy flowing into and out of high voltage batteries on electrified vehicles. Our other electronic products
facilitate signal, data and power management within the vehicle and include the associated software required to facilitate
these functions. Key components of our other electronic products portfolio include zone control modules, body domain
control modules and low voltage and high voltage power distribution modules. Our software offerings include embedded
control, cybersecurity software and software to control hardware devices. Our customers traditionally have sourced our
electronic hardware together with the software that we embed in it.
We serve all of the world's major automotive manufacturers across both our Seating and E-Systems businesses, and we have
automotive content on more than 450 vehicle nameplates worldwide. It is common for us to have both seating and electrical
and/or electronic content on the same vehicle platform.
Our businesses benefit globally from leveraging common operating standards and disciplines, including world-class product
development and manufacturing processes, as well as common customer support and regional infrastructures, all of which
contribute to our reputation for operational excellence. Our core capabilities are shared across component categories and
include: high-precision manufacturing and assembly with short lead times; complex, global supply chain management; global
engineering and program management; the agility to establish and/or transfer production between facilities quickly; and a
unique, customer-focused culture. In select instances, we are able to manufacture both Seating and E-Systems components in
the same facility. Our businesses also utilize proprietary, industry-specific processes and standards, leverage common low-cost
engineering centers and share centralized operating support functions. These functions include health and safety, logistics,
quality, supply chain management and all major administrative functions such as corporate finance, executive administration,
human resources, information technology and legal.
Available Information on our Website
Our website address is http://www.lear.com. We make available on our website, free of charge, the periodic reports that we file
with or furnish to the Securities and Exchange Commission ("SEC"), as well as all amendments to these reports, as soon as
reasonably practicable after such reports are filed with or furnished to the SEC. We also make available on our website or in
printed form upon request, free of charge, our Corporate Governance Guidelines, Code of Business Conduct and Ethics,
charters for the standing committees of our Board of Directors (the "Board") and other information related to the Company. We
are not including the information contained on our website as part of, or incorporating it by reference into, this Report.
The SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements and other
information related to issuers that file electronically with the SEC.
History
Lear was founded in Detroit in 1917 as American Metal Products, a manufacturer of seating assemblies and other components
for the automotive and aircraft industries, and was incorporated in Delaware in 1987. Through a management-led buyout in
1988, Lear Corporation established itself as a privately held seat assembly operation for the North American automobile market
with annual sales of approximately $900 million. We completed an initial public offering in 1994 and developed into a global
supplier through organic growth and a series of acquisitions.
In May 1999, we acquired UT Automotive, Inc. ("UT Automotive") from United Technologies Corporation. UT Automotive
was a leading supplier of automotive electrical distribution systems. The acquisition of UT Automotive represented our entry
into automotive electrical and electronic systems and formed the basis for our current E-Systems segment.
We have subsequently augmented our internal growth plans with selective acquisitions and investments to expand our
component capabilities and global footprint, as well as expand our technology portfolio, including the following:
•
•
•
•
•
In May 2012, we acquired Guilford Mills, a leading supplier of automotive seat and interior fabric, for approximately
$243 million.
In January 2015, we acquired Everett Smith Group, Ltd., the parent company of Eagle Ottawa, LLC ("Eagle Ottawa"), the
world's leading provider of leather for the automotive industry, for approximately $844 million.
In April 2017, we acquired Grupo Antolin's automotive seating business for approximately $292 million.
In January 2019, we launched Lear Innovation Ventures ("LIV") to supplement our internal innovation efforts. LIV
provides us with a framework to invest in advanced development teams, partnerships and early stage technologies by
working with venture capital firms, accelerators and incubators. LIV also makes direct capital investments in start-ups and
internal innovation initiatives.
In March 2021, we acquired M&N Plastics, an injection molding specialist and manufacturer of engineered plastic
components for automotive electrical distribution applications.
4
Table of Contents
•
•
•
•
In February 2022, we acquired substantially all of Kongsberg Automotive's Interior Comfort Systems business unit
("Kongsberg ICS") for approximately $188 million. Kongsberg ICS specializes in thermal comfort solutions, including
seat massage, lumbar, heat and ventilation products. This acquisition enhances our seat component capabilities by adding
specialized thermal comfort seating solutions and further differentiates our product offerings by improving the seat
system's performance and packaging.
In May 2022, we acquired Romanian-based Thagora Technology SRL ("Thagora") to access scalable smart-
manufacturing technology. Thagora's proprietary solutions complement our sustainable manufacturing processes by
reducing scrap generated by our Seating segment's surface materials operations and lowering energy usage during
production. In addition, Thagora's Industry 4.0 technologies bring significant advances to our manufacturing operations
through engineering and logistics enhancements, including improved material traceability and facility footprint utilization
capabilities.
In May 2022, we entered into a definitive agreement to acquire I.G. Bauerhin ("IGB") for approximately €140 million, on
a cash and debt free basis. IGB is a privately held supplier of automotive seat heating, ventilation and active cooling,
steering wheel heating, seat sensors and electronic control modules, headquartered in Gruendau, Germany. The
acquisition, subject to regulatory approvals and customary closing conditions and adjustments, is expected to close in
2023.
In November 2022, we acquired InTouch Automation ("InTouch"), a supplier of Industry 4.0 technologies and complex
automated testing equipment critical in the production of automotive seats. InTouch's product portfolio is aligned with our
Industry 4.0 strategy to implement technologies designed to automate the testing and validation of seat components and
complete seats.
Industry
We supply all vehicle segments of the automotive light vehicle original equipment market in every major automotive producing
region in the world. Our sales are driven by the number of vehicles produced by the automotive manufacturers, which is
ultimately dependent on consumer demand for automotive vehicles and the availability of raw materials and components, and
our content per vehicle. Due to the evolving global economic conditions since 2020, initially as a result of the COVID-19
pandemic, the automotive industry experienced a decline in global customer sales and production volumes. Although industry
production has recovered modestly with production increasing 7% in 2022 compared to 2021 and expected to increase 3% in
2023 compared to 2022 (based on January 2023 S&P Global Mobility, formerly IHS Markit, projections), production remains
well below recent historic levels. Global industry production in 2022 was approximately 8% below 2019 pre-pandemic levels
and 16% below 2017 peak levels. Since 2020, industry and economic conditions have been influenced directly and indirectly by
macroeconomic events such as the COVID-19 pandemic and, beginning in the first quarter of 2022, the Russia-Ukraine
conflict, resulting in unfavorable conditions, including shortages of semiconductor chips and other components, elevated
inflation levels, higher interest rates, and labor and energy shortages in certain markets. These factors, among others, are
impacting consumer demand as well as the ability of automotive manufacturers to produce vehicles to meet demand. Our
strategy to mitigate these impacts encompasses our comprehensive cost management process, including value added value
engineering (or cost technology optimization), actions to further align our manufacturing capacity to the current industry
production environment, investments in Industry 4.0 technologies to enhance operational efficiencies and utilization of existing
capital to reduce future expenditures. For risks related to the COVID-19 pandemic, including supply shortages, see Item 1A,
"Risk Factors."
Details on light vehicle production in certain key regions for 2022 and 2021 are provided below. Our actual results are impacted
by the specific mix of products within each market, as well as other factors described in Item 1A, "Risk Factors."
(In thousands of units)
North America
Europe and Africa
Asia
South America
Other
Total
2022 (1)
14,307.3
16,089.2
45,637.9
2,716.0
1,767.6
80,518.0
2021 (1) (2)
13,047.1
16,290.8
41,840.0
2,507.7
1,565.0
75,250.6
% Change
10%
(1%)
9%
8%
13%
7%
(1) Production data based on S&P Global Mobility.
(2) Production data for 2021 has been updated from our 2021 Annual Report on Form 10-K to reflect actual production levels.
5
Table of Contents
Details on our sales in certain key regions for 2022 and 2021 are provided below:
(In millions)
North America
Europe and Africa
Asia
South America
Total
China (consolidated)
China (non-consolidated)
$
$
$
2022
8,910.7 $
6,946.0
4,183.2
851.6
20,891.5 $
2021
7,548.2
6,745.3
4,227.9
741.7
19,263.1
% Change
18%
3%
(1%)
15%
8%
2,976.1 $
1,750.0
3,018.1
1,307.1
(1%)
34%
The automotive industry, and our business, continue to be shaped by the broad trends of electrification and, to a lesser extent,
shared mobility. Demand for, and regulatory developments related to, improved energy efficiency, sustainability, and enhanced
safety and communications (e.g., government mandates related to fuel economy, carbon emissions and safety equipment) are
significant drivers of these trends. Electrification, in particular, is likely to be at the forefront of our industry for the foreseeable
future.
In 2023, the battery electric vehicle market is expected to represent 15% of global light vehicle production (based on January
2023 S&P Global Mobility projections), as compared to 11% in 2022 and 7% in 2021. Battery electric vehicle production
increased to 8.7 million units in 2022 from 4.9 million units in 2021, primarily driven by growth in China. Increasing demand
for electric vehicles is driven by numerous product offerings from both traditional and non-traditional automotive
manufacturers, government requirements and incentives, automotive manufacturers' internal targets and a growing segment of
end consumers who are seeking alternatives to vehicles with traditional ICE architectures. Meeting this demand requires further
use of electronically controlled and assisted powertrains and related components to improve fuel efficiency; the adoption of
alternative energy powertrains, such as 48-volt mild hybrid, full hybrid, plug-in hybrid and pure battery electric powertrains that
facilitate electrification of the vehicle; and the use of lighter weight materials throughout the vehicle.
Shared mobility also continues to be a key trend in the automotive industry. Demand for shared mobility services and on-
demand transportation from providers such as Uber, Lyft and Didi (in China) is driving interest and growth in this trend.
Increased vehicle utilization and the relevance of ride-sharing is leading to customer and consumer demands for more services,
enhanced personalization, configurability of the automotive interior and an improved mobility experience. The increasing
prevalence of shared mobility services may result in a new segment of customers with unique vehicle technology and design
needs, including more flexible, durable and connected seating solutions for a wide range of passengers.
Our business is also influenced by vehicle segment trends that continue to experience a shift in consumer preference toward
crossover and sport utility vehicles. This trend positively impacts our business as content per vehicle on such vehicles,
especially within our Seating business, can be significantly higher. Crossover and sport utility vehicle production has grown to
approximately 43% of total vehicle production in 2022, up from 33% five years ago.
Strategy
Through our products, technology and strategic initiatives, we are well positioned to capture business growth opportunities
resulting from current industry trends. We are focused on profitably growing our businesses and have implemented a strategy
designed to deliver industry-leading, long-term financial returns. This strategy is based upon the following four pillars designed
to capitalize on current industry trends and drive growth and profitability in both of our business segments:
• Extend our market leadership position in Seating with priceable content;
• Transform our E-Systems business through accelerated growth in connection systems, vehicle architecture evolution and
electrification;
• Build on our reputation for operational excellence through investment in Industry 4.0 technologies; and
• Prioritize people and the planet through our Environmental, Social and Governance ("ESG") initiatives.
In our Seating business, key attributes of the seat design are evolving as the market continues to pivot toward electric vehicles,
providing us with an opportunity to offer value added solutions to our customers through our products and to use our leading
market position to capture additional market share. Our products include seat massage, lumbar, heat and ventilation through
INTUTM Thermal Comfort, the latest addition to our Intelligent Seating (INTUTM Seating) offerings, and seat reconfigurability
through Configurable Seating Architecture (ConfigurE+TM). By integrating our existing seating capabilities with the thermal
comfort solutions, realized through the acquisition of Kongsberg ICS, we are positioned to extend our competitive advantage
and leadership position in Seating. Our thermal comfort solutions provide our customers with a unique value proposition,
6
Table of Contents
reducing complexity and cost while providing superior performance, efficiency and comfort. Specifically, our newly designed
thermal comfort seat system can reduce sub-components by 50% and increase airflow directly to the occupant by 40%, as
compared to currently available designs. Our design enables heating and ventilation of the occupant rather than the entire cabin,
which can improve energy efficiency, resulting in improved battery range for electric vehicles. With our thermal comfort
solutions expertise, we are poised to capitalize on the market trends in electric vehicles, ride sharing and second and third row
comfort, while also providing greater design, cost, production and energy efficiency for our customers.
In our E-Systems business, our broad capabilities in electrical distribution and connection systems, BDUs and other electronic
products support the trend toward electrification, as well as the evolution toward zone-based vehicle electrical architectures for
both ICE and electrified powertrains. We are investing in and expanding our electrical distribution and connection systems
business. This business is benefiting from expanded content per vehicle in line with higher circuit counts supporting high-speed
data movement within the vehicle, as well as high voltage wire harnesses and high voltage battery components such as intercell
connect boards on electrified powertrains. In addition, we have enhanced our vertical integration capabilities in connection
systems through the acquisition of M&N Plastics. Our BDU business is benefiting from the increased adoption of electrified
powertrains and the expansion of longer range, larger format (trucks and SUVs) and higher performance electrified vehicles,
where we provide market-leading solutions. Differentiation through higher power management capacity, lighter weight
solutions, and optimized and vertically integrated manufacturing solutions provide us with a competitive advantage in the
electrification market. Our other electronic products business is benefiting from the adoption of new vehicle electrical
architectures with more integrated power management and control, which is aligned with our strong history of providing highly
complex and integrated electronics to our customers. We are streamlining our electronics product portfolio to align with this
trend, focusing future investments on those products where we believe that we have a competitive advantage and we can
achieve industry-leading financial returns. Further, we are de-emphasizing and exiting those product lines where we do not see
a path to sustainable risk-adjusted financial returns.
We are building on our reputation for operational excellence within the automotive industry with the establishment of our Lear
Forward Plan, which will enhance operational efficiencies across our business, and our investments in Industry 4.0
technologies, including the 2022 acquisitions of Thagora and InTouch. Our acquisition of Thagora provides us with scalable
smart-manufacturing technology that reduces scrap generated by our Seating segment's surface materials operations and lowers
energy usage during production. Our acquisition of InTouch provides us with complex testing equipment that automates the
testing and validation of seat components and complete seats.
We continue to embed responsible and sustainable ESG principles into our key business processes and operations. We have
developed new products such as ReNewKnitTM, a sustainable sueded alternative material that is fully recyclable at its end of life
and composed of 100% recycled plastic bottles, FlexAirTM, a 100% recyclable non-foam alternative, and SoyFoamTM, a
substitute for certain petroleum-based products. We also have improved energy efficiency in our operations and established
climate goals to reduce carbon emissions and increase the use of renewable energy. In 2022, we joined Climate Group's RE100,
a global renewable electricity initiative comprised of companies committed to sourcing 100% of their electricity from
renewable sources.
Seating Segment
Lear is a recognized global leader in complete seat systems. Based on independent market studies and management estimates,
we believe that we hold the #2 position in complete seat systems globally on the basis of revenue with strong positions in all
major markets and a 25% global market share in 2022. We are also a recognized leader in key individual seat components
produced for complete seat systems.
Our Seating segment consists of the design, development, engineering, assembly and just-in-time delivery of complete seat
systems, as well as all major seat components, including seat trim covers; surface materials such as leather and fabric; seat
mechanisms; seat foam; thermal comfort solutions such as seat massage, lumbar, heat and ventilation products; and headrests.
Our extensive system-level knowledge and component-level capabilities, including internal development of sensor and control
algorithms, have provided a solid foundation for innovation and commercialization of advanced comfort solutions, including
thermal, safety and wellness products, and convenience features. We believe that with our comprehensive set of component
offerings, we are a leader in the global market. Overall, our global manufacturing and engineering expertise, low-cost footprint,
complete component capabilities, quality leadership and strong customer relationships provide us with a solid platform for both
organic and inorganic growth opportunities to enable us to reach our mid-term target global market share of 28% in complete
automotive seat systems.
We produce seat systems that are fully assembled and ready for installation in automobiles and light trucks. Seat systems are
generally designed and engineered for specific vehicle models or platforms. We develop seat systems and components for all
vehicle segments from compact cars to pick-up trucks and full-size sport utility vehicles. We are the world leader in luxury and
performance automotive seating, providing craftsmanship, elegance in design, use of innovative materials and industry-leading
technology required by premium brands and vehicles, including those produced by Alfa Romeo, Aston Martin, Audi, BMW,
7
Table of Contents
Cadillac, Chevrolet, Ferrari, Genesis, Infiniti, Jaguar, Lamborghini, Land Rover, Lincoln, Maserati, Mercedes-Benz, Polestar,
Porsche and Volvo.
We are executing on our strategy to extend our leadership position in the market through unique product offerings and selective
vertical integration. Our acquisition of Kongsberg ICS provided us with capabilities in seat massage, lumbar, heating and
ventilation. ConfigurE+ is a wireless powered rail system that allows for easy repositioning of seats within vehicles. Further,
selective vertical integration of key seat components is enhancing growth and increasing profitability, as well as improving
quality. In this regard, we have developed standardized seat mechanisms that can be used across multiple vehicle programs to
minimize investment costs. Our seat mechanisms are developed and manufactured in key locations to supply every major
automotive producing region in the world. We believe that our precision-engineered seat mechanism expertise and low-cost
manufacturing footprint provide us with a competitive advantage.
Our seat cover operations have continued to expand in low-cost markets, including precision cutting, assembly, sewing and
lamination. Our acquisition of Eagle Ottawa has afforded us an industry-leading market share in automotive leather globally.
Our capabilities in leather design, development and manufacturing allow us to deliver the most luxurious, durable and
performance-tested leathers to our customers. Our acquisition of Guilford Mills provided us with Guilford Performance
Textiles, a line of automotive seat and interior fabrics. On a global basis, we can provide a full range of seat cover capabilities,
including design and surface coating solutions, as well as unique leather and fabric applications. We believe that the
combination of these capabilities in seat surface materials differentiates us and provides us with a competitive advantage
facilitating our leadership position in the industry.
We are committed to sustainability and reducing the environmental footprint of our products, operations and supply chain. We
are working to improve the sustainability of our operations through identification and reduction of generated waste, reuse of
materials whenever possible and recycling. Our sustainability efforts leverage available technology to replace certain
petroleum-based products with more sustainable alternatives, such as SoyFoamTM and, more recently, FlexAirTM, our 100%
recyclable non-foam alternative that is anticipated to reduce both CO2 emissions and mass as compared to traditional foam
offerings, as well as improve breathability, resulting in better performance. In addition, we have focused development efforts on
commercializing a range of fabrics that contain recycled, renewable or recyclable yarns that reduce our environmental impact.
These fabrics include our ReNewKnitTM sustainable sueded alternative material, which is a first-to-market automotive textile
that is fully recyclable at its end of life and composed of 100% recycled plastic bottles. ReNewKnitTM fibers are spun from
polyester yarn and finished with a foam-free recycled fleece backing.
Advanced Seating Craftsmanship and Innovation
We believe that our broad capabilities, including advanced design and material integration skills, are a differentiating
competitive advantage for us. Our team of experts at our Center for Craftsmanship in Southfield, Michigan has developed a
portfolio of technologies that deliver differentiated design, craftsmanship and comfort, as well as sustainable products. Through
this dedicated studio, we are leveraging our unique position to be an industry leader in differentiated design and facilitating
customer interactions with designers and engineers working collaboratively to create innovative solutions early in the design
process. The breadth of our portfolio and depth of our design expertise provides the opportunity to better integrate all seat
components to provide differentiated design comfort, quality and overall value for the end consumer. We believe that our
unmatched component capabilities, design expertise, global manufacturing presence and portfolio of enabling and sustainable
technologies uniquely position us to bring innovative designs into production with the highest level of craftsmanship.
We believe that we are the only fully integrated seat supplier with global capabilities in critical seat components, together with
software design, integration and manufacturing expertise. To maintain our competitive advantage, we continue to drive
advanced seating innovations through a combination of comprehensive product capabilities aligned with industry trends and
early customer engagement. The result is a broad portfolio of innovative, sustainable solutions enabling our intelligent seating
offerings for consumers.
Intelligent Seating (INTUTM Seating)
The seat offers a direct connection between the driver, passengers and vehicle systems. Our development of INTUTM
technologies provides the driver and passengers with intelligent, intuitive seat system options that offer advanced comfort
solutions, including thermal, safety and wellness products, as well as configurable seating product technologies. Our extensive
knowledge in consumer ergonomics and comfort, in combination with our electronics capabilities, facilitated the development
of our INTUTM seat features, which are capable of being programmed to identify certain key occupant inputs and automatically
adjust the appropriate seat parameters to provide consumers with a better, highly personalized, in-vehicle experience.
Our INTUTM Comfort features were developed to improve comfort throughout long drives. Derived from our research, INTUTM
Comfort deploys proprietary technology and in-house developed analytical processes to identify the optimal seat position for
the occupant given certain conditions. For example, on extended trips, the lumbar support is continuously adjusted for optimal
8
Table of Contents
comfort, and seat bolsters automatically adjust during sharp curves to provide the driver with optimal support. The latest
addition to our INTUTM Comfort features is INTUTM Thermal Comfort that focuses on faster and more efficient heating and
ventilation for the occupant. We have developed and designed efficiencies into individual seat components and full system
integration to outperform existing systems. Continued advancements in INTUTM Thermal Comfort are targeted to optimize the
overall thermal performance of the vehicle interior, which may reduce energy consumption for vehicles with ICE architectures,
as well as those with electrified powertrains.
Configurable Seating Architecture (ConfigurE+TM)
Through our ConfigurE+TM configurable seating architecture, we are able to provide flexible seat positioning while offering
consumers advanced seat features and functions. Winner of an Automotive News PACE Award in 2019, ConfigurE+TM with its
configurable powered rail system enables selective seat positioning and seat removal for virtually limitless configurations while
maintaining the functionality of the seat's electronic features. By providing power without a wire harness, seats can be easily
removed for cargo management, and vehicle cabins can be quickly customized, providing flexibility for personal, autonomous,
ride-share and public transportation needs. Further, the potential market for ConfigurE+TM includes commercial trucks as well
as light vehicles.
Other Core Capabilities
With capabilities unmatched by any seat supplier in the industry, we consistently produce world-class seat systems to meet or
exceed the expectations of every type of driver and passenger. Our designs incorporate intelligent features, and our patented
modular sub-assemblies with embedded technologies have the potential to transform the seating market.
We maintain state-of-the-art testing, instrumentation and data analysis capabilities. We have in-house, industry-leading seat
validation test centers featuring crash worthiness, durability and full acoustic and sound quality testing capabilities. Together
with computer-controlled data acquisition and analysis capabilities, these centers provide precisely controlled laboratory
conditions for sophisticated testing of parts, materials and systems. In addition, we incorporate many convenience, comfort and
safety features into our designs, including advanced whiplash prevention concepts, integrated restraint seat systems and side
impact airbags. We also invest in our computer-aided engineering design and computer-aided manufacturing systems to
facilitate a more efficient design process.
We have developed products and materials to improve comfort and ease of adjustment, promote customization and styling
flexibility, increase durability and reliability, enhance safety, expand the usage of environmentally friendly materials and reduce
cost and weight.
Our core capabilities extend into key seat components as well, including:
• Leather and Fabric – We deliver the most luxurious, durable and performance-tested leathers to more automotive brands
globally than any other automotive leather supplier, while promoting sustainable and responsible sourcing practices. Our
premium leathers are designed for seamless integration with our industry-leading secondary operations, exceeding
customer expectations for quality and service. Our Eagle Ottawa premium leather group has developed and launched, in
both Europe and North America, a new technology that allows for the creation of highly customizable designs with new
levels of definition and pillowing, improving the comfort and style of the seat while enabling the necessary air flow for
ventilated seats. Additionally, our proprietary anti-soiling performance leather finishing technology, AnsoléTM, improves
durability and protects against staining and fading.
With respect to fabrics, we have focused development efforts on commercializing a range of fabrics that contain recycled,
renewable or recyclable yarns that reduce our environmental impact. These fabrics include our ReNewKnitTM sustainable
sueded alternative material that is fully recyclable at its end of life and composed of 100% recycled plastic bottles, which
is scheduled to launch with a global automotive manufacturer in 2024. Our branded TeXstyleTM surface material coatings
and treatment technologies enhance cleanability by releasing and repelling stains; prevent the growth of bacteria and
mildew through the addition of antimicrobial treatments, including silver ion technologies; protect fabric against water
and oil-based stains; minimize soiling of light colors; and are anti-static and anti-dusting.
• Seat Mechanisms – We supply world-class front and rear seat systems, recliners, tracks, latches and other products in a
scalable modular family. Our seat architectures are a core component of our industry-leading vertical integration
capabilities around the world. Smaller, low-weight and low-noise materials deliver high performance, safety and
functionality.
Our high-speed smart fold technology is a folding adjustment mechanism that delivers premium convenience while
maintaining leading safety and comfort benefits. Our mini recliners and micro adjust tracks are seat mechanisms that
provide precision movement and facilitate interior packaging space flexibility. Our ECO Structures utilize an innovative
hub and spoke concept offering economic solutions for developing markets.
9
Table of Contents
• Foam and Comfort – Our highly engineered low-profile foam, low-emission foam and our first-to-market, U.S.-sourced
SoyFoamTM are break-through innovations in comfort, safety and sustainability. Our FlexAirTM technologies offer a 100%
recyclable non-foam alternative to traditional foam.
Manufacturing Leadership
Our continued focus on expanding our expertise and capabilities in materials, logistics and manufacturing is a key enabler in
providing our customers with world-class seat system products. Our unique proprietary processes and employee engagement
initiatives will continue to provide us with a competitive advantage.
We pioneered just-in-time seat assembly. Typically located adjacent to or near our customers' manufacturing and assembly
sites, our just-in-time facilities deliver assembled seats matching our customers' exact build specifications for a particular day,
shift and sequence. Our expertise in logistics and lean manufacturing processes enable us to meet our customers' delivery
requirements while maintaining inventories at optimum levels.
We believe that we are the world's most vertically integrated manufacturer of complete seat systems, providing us with a
competitive advantage in terms of cost and quality. We utilize the latest industry innovations and automated technologies to
facilitate our continuous improvement efforts. Our recent investments in Industry 4.0, including the 2022 acquisitions of
Thagora and InTouch, have resulted in operational efficiencies in the manufacturing process. Moreover, we have continued to
expand our employee engagement initiatives, achieving global scalability and successfully driving cultural advances. Our
initiatives have resulted in increased first-time quality, decreased absenteeism, material cost reductions and decreased average
build times per seat set.
Customers
The top five customers of our Seating segment are: General Motors, Mercedes-Benz, Stellantis, Volkswagen and Ford.
Competition
Our primary competitors in this segment globally are Adient, plc, Forvia, Magna International Inc., Toyota Boshoku
Corporation, TS Tech Co., Ltd. and Yanfeng Automotive Systems Co., Ltd., which have varying market presence depending on
the region, country or automotive manufacturer. Toyota Motor Corporation and Honda Motor Co. Ltd. hold equity ownership
positions in Toyota Boshoku Corporation and TS Tech Co., Ltd., respectively. A limited number of other automotive
manufacturers maintain a presence in the seat system market through wholly owned subsidiaries or in-house operations. In seat
components, we compete with the seat system suppliers identified above, as well as certain suppliers that specialize in particular
components.
For additional factors that may impact our Seating segment's business, financial condition, operating results and/or cash flows,
see Item 1A, "Risk Factors."
E-Systems Segment
Our E-Systems segment consists of the design, development, engineering and manufacture of complete electrical distribution
and connection systems, BDUs and other electronic products for light vehicles globally. We are a leader in signal distribution
and power management within the vehicle for all types of powertrains – from traditional ICE architectures to the full range of
electrified powertrains. Our expertise and product portfolio support new vehicle electrical architectures, including the adoption
of high voltage electrified vehicle architectures and the transition to zone-based vehicle electrical architectures. We are
expanding our capabilities and introducing new product lines, primarily within our electrical distribution and connections
systems business and including intercell connect boards, BDUs, engineered components, high voltage wire, high-speed data
cables and zone control modules. Further, we are deemphasizing and exiting certain electronics product lines, including audio
modules, lighting modules, on-board chargers, telematics control units and niche electronic controllers, where we do not see a
path to sustainable risk-adjusted financial returns.
In our E-Systems business, the electrification of the vehicle powertrain adds significant content per vehicle for our products,
including high voltage wire harnesses, high voltage battery connection systems (intercell connect boards, bus bars and main
battery connection systems) and BDUs. The trend toward longer range, larger format (trucks and SUVs) and higher
performance electrified vehicles further increases content per vehicle and aligns favorably with our products, including high
power-to-size ratio terminal systems, high performance BDUs and intercell connect boards.
In addition, the continuing evolution of the vehicle electrical architecture is introducing more highly integrated power
management and control electronics (or zone control modules) and greatly expanding the use of high-speed data within the
vehicle. Our customers are adopting these new architectures on both ICE and electrified powertrains to enable continued
integration of more electrical and electronic content and to enable future software-defined functionality. These market demands
10
Table of Contents
align favorably with our expertise in zone control modules and high-speed data cables and are expected to increase content per
vehicle.
Our product portfolio strategy enables increased leverage of our investments across a focused product portfolio and creates a
competitive advantage as we are able to offer our customers customized solutions optimized to provide complete architecture
benefits. Our component designs consider the performance of the complete architecture, creating superior value for our
customers. Our investments in electrification over the past fourteen years are providing us with a significant growth opportunity
with respect to this trend. Further, electrified vehicle architectures represent a significant content per vehicle expansion
opportunity for us.
Electrical Distribution and Connection Systems
Electrical distribution and connection systems route network and electrical signals and manage electrical power within the
vehicle for all types of powertrains, including traditional ICE architectures and the full range of electrified powertrains,
supporting the current industry trend toward electrification. Key components of electrical distribution and connection systems
include wire harnesses, terminals and connectors, high voltage battery connection systems and engineered components for both
ICE architectures and electrified powertrains that require management of higher voltage and power.
Wire harness assemblies, together with connection systems, link all of the various electrical and electronic devices within the
vehicle to each other and/or to a power source. Our wire harnesses provide low voltage (12 volts and 48 volts) and high voltage
(60 volts – 800 volts) power distribution. Low voltage wire harnesses are used on all light duty vehicles, and high voltage wire
harnesses are used on vehicles with electrified powertrains. Wire harness assemblies are a collection of individual circuits
fabricated from raw and insulated wire, which is automatically cut to length and terminated during the manufacturing process.
Individual circuits are assembled together, inserted into connectors and wrapped or taped to form wire harness assemblies. The
assembly process is labor intensive, and as a result, production is generally performed in low-cost labor sites in Mexico,
Honduras, Brazil, Eastern Europe, Africa, China and the Philippines.
Connection systems include terminals and connectors, high voltage battery connection systems and engineered components that
join wire harnesses together at their respective end points or connect electronic devices to wire harnesses. Connection systems
can vary significantly in size and complexity depending on the amount of power or data being transferred and the number of
connections being made at any particular point in the electrical distribution system. Connection systems support both low
voltage and high voltage power distribution. Low voltage connection systems are used on all light duty vehicles and high
voltage connection systems are used on vehicles with electrified powertrains. Our connection systems are produced using
highly automated processes, including stamping, injection molding and automated assembly processes. In 2021, we entered into
multiple partnerships to expand our business opportunities in connection systems, including partnerships with IMS Connector
System, a technology company based in Germany to enable advanced high-speed data connection systems, and Hu Lane
Associate Inc., a world-class manufacturer of automotive connector products to expand our access to a broader catalog of
product-enabling solutions for our customers. Our connection systems are currently manufactured in Germany, Czech Republic,
China and the United States. Key material inputs to our connection systems business include metals, such as copper and
aluminum, and various resins.
High voltage battery connection systems consist of stamped and molded components and assemblies that provide connections
between battery cells, from the battery pack to the vehicle electrical architecture, and between other electrical components
within the high voltage battery pack. High voltage battery connection systems can vary in size and design to accommodate
various high voltage battery architectures and enable safe and efficient electrified powertrain battery packs. Specific products
include intercell connect boards, bus bars and main battery connection systems. These products are produced using highly
automated processes, including stamping, bending, molding and assembly. Our established capabilities in connection systems
and engineered components facilitate our ability to produce these products. Our high voltage battery connection systems are
produced in Germany, the United States, the Czech Republic, Mexico and China. Key material inputs to our high voltage
battery connection systems business include metals, such as copper, aluminum, and steel, and various resins.
Engineered components consist of molded components included in wire harness assemblies. These components perform
specific functions, such as protection, routing, sealing or covering, to ensure that the wire harness assembly properly performs
its function. In 2021, we acquired M&N Plastics, a privately owned injection molding specialist and manufacturer of
engineered plastic components for automotive electrical distribution applications, which significantly expanded our capabilities
and footprint in engineered components. Engineered component capabilities are a significant contributor to vertically integrated
product assemblies and enable business growth across electrical distribution and connection systems and our Seating business
due to increased control of product cost and quality, as well as the supply chain. Engineered components are applicable to all
vehicle architectures and are produced using molding processes. Our engineered components are currently manufactured in
Germany, the Czech Republic, the United States and China. Key material inputs to our engineered components are various
resins.
11
Table of Contents
Battery Disconnect Units
In our E-Systems segment, we also design, develop, engineer and manufacture BDUs. These products control all electrical
energy flowing into and out of the high voltage battery on electrified vehicles. More than fourteen years of experience in BDUs
and our expertise in areas integral to the performance of BDUs, such as power and thermal management and electrical
architecture integration, have contributed to our well-established market position and our ability to effectively and
competitively supply BDUs. BDUs are applicable to all electrified powertrain vehicles, but the size, complexity and
configuration of BDUs can vary widely dependent upon the power requirements of individual vehicle platforms. Our BDUs are
currently manufactured in Mexico, China and Morocco, with an anticipated new facility opening in the United States in 2023.
Key material inputs to our BDUs include metals, including copper and aluminum, various resins, and power components such
as fuses, e-fuses and contactors.
Other Electronic Products
In our E-Systems segment, we also design, develop, engineer and manufacture other electronic products that control various
functions and power distribution within the vehicle. Our electronic product offerings include zone control modules, body
domain modules and low voltage and high voltage power distribution units. These units are typically purchased with embedded
software to manage vehicle functions, control power distribution and ensure vehicle network connection. We assemble these
modules using specialized, high-speed surface mount placement equipment and assembly processes in Mexico, Europe,
Northern Africa and China.
Technology
Our complete electrical distribution and connection system design capabilities, coupled with market-leading component
technologies, allow early access to our customers' product development teams, which provides an indication of our customers'
product needs and enables us to develop system design efficiencies. Our expertise is developed and delivered by approximately
2,500 engineers across fourteen countries and is led by four global technology centers of excellence in China, Germany, Spain
and the United States for each of our major product lines in this segment.
In electrical distribution and connection systems, our technology includes expertise in the design and use of alternative
conductor materials, such as aluminum, copper-clad steel and other hybrid alloys. Alternative conductor materials can enable
the use of ultra small gauge conductors, which reduce the weight and packaging size of electrical distribution and connection
systems. We also have developed proprietary manufacturing process technologies, such as our vertical manufacturing system
that features three dimensional wire harness assembly boards. Our expertise in connection system technology facilitates our
ability to implement these small gauge and alternative alloy conductors. We have developed advanced capabilities in aluminum
terminals and aluminum wire termination, ultra small gauge termination and high voltage terminals and connectors. We have
developed high density in-line connectors and new small gauge terminals that will enable wire gauge reduction and provide our
customers with smaller and lower cost solutions. In high voltage battery connection systems, we have established a leading
capability in power density (power per packaging size) that is being adopted by multiple automotive manufacturers. In addition,
we have developed highly integrated and highly automated solutions to improve the performance of high voltage batteries.
These technologies are supported by our proprietary virtual proving grounds, which is an industry-leading suite of in-house
developed tools and processes to significantly reduce design, development and validation testing time and expense.
In BDUs, we have developed many patented or patent pending technologies that enable management of higher power levels and
efficient thermal management. In addition, our technology and capabilities were awarded an Automotive News PACE Award
for technological excellence in 2021. Our BDU capabilities enable the highest power large-format vehicles by utilizing
innovative technologies, including flat-flex wires to quickly dissipate heat. Our product achieves a 20% weight reduction, 32%
size reduction and 135% gain in current-carrying capability across 400 volt and 800 volt architectures, as compared to currently
available architecture offerings. These technologies are also scalable to achieve superior performance for vehicles with lower
power requirements.
In our other electronic products, we are a market leader in zone control, body domain control and power distribution technology
and began production of our Automotive News PACE Award-winning Solid State Smart Junction BoxTM in 2016. Further, our
expertise in e-fuse technology is leading to new power distribution business awards as new architectures are adopted and
functional safety requirements increase. Software is a critical element of our other electronic products business. Software
capabilities are becoming more important in the management of complex and highly sophisticated electronic architectures.
Software within the vehicle is rapidly growing as a key element of technological innovation and a cost effective way to provide
new features and functions.
For additional factors that may impact our E-Systems segment's business, financial condition, operating results and/or cash
flows, see Item 1A, "Risk Factors."
12
Table of Contents
Customers
The top five customers of our E-Systems segment are: Ford, Geely (including Polestar and Volvo), Renault-Nissan, Jaguar
Land Rover and Volkswagen.
Competition
Our major competitors in electrical distribution and connection systems include Aptiv PLC, Leoni AG, Molex Incorporated (a
subsidiary of Koch Industries Inc.), Sumitomo Corporation, TE Connectivity and Yazaki Corporation. Our major competitors in
BDUs include Contemporary Amperex Technology Co. Limited, Delta Electronics, Inc., LG Energy Systems, Ltd., Panasonic
Holdings Corporation and Yazaki Corporation. Our major competitors in other electronic products include Aptiv PLC,
Continental AG, Denso Corporation, Harman International Industries, Incorporated (a subsidiary of Samsung Electronics Co.
Ltd.), Hella AG, Robert Bosch GmbH, Valeo S.A. and Visteon Corporation.
Environmental, Social and Governance
At Lear, we recognize the importance of ESG considerations to our investors, as well as our employees, customers and other
stakeholders. We believe that growing customer and consumer demand for sustainable products provides additional business
opportunities for our Company, and more efficient use of energy and natural resources provides the potential to lower operating
costs. We are continuously working to embed responsible and sustainable ESG principles into our key business processes and
operations, including without limitation corporate strategy, enterprise risk management, innovation, procurement, product and
process development, and sales. Our ESG strategy and initiatives are developed by a cross-functional team of senior subject
matter experts, reviewed and approved by senior management and overseen by the Governance and Sustainability Committee
of our Board. We actively communicate our goals and activities to our investors in our public disclosures available on our
website and in our SEC filings. Our ESG efforts demonstrate how we live our core value to Get Results the Right Way, which
we have reinforced by recommitting to the United Nations Global Compact each year since becoming a signatory in 2020.
Energy Efficiency and Carbon Reduction Efforts at Lear
• How We Are Driving Sustainability in Our Production Processes
We employ standardized production processes globally that are designed to drive the efficient use of energy to reduce
energy costs and greenhouse gas emissions, the prevention of pollution and the utilization of safe and sustainable
production processes. We have published carbon reduction goals that we intend to achieve by 2030, including 100% usage
of renewable energy for our electricity consumption and a 50% reduction in carbon emissions at our facilities, as well as
an aspiration to be carbon neutral by 2050.
We are implementing a multifaceted approach to achieve these goals. In our internal operations, this approach is focused
in large part on increasing our usage of renewable energy, as well as on efforts to reduce energy consumption and use
energy more efficiently. In particular, we have developed, and are implementing, a comprehensive renewable energy
strategy which includes the following:
– On-site renewable energy generation at certain sites (we currently have solar arrays operating at eight sites in
Europe, South America and China);
– Purchasing energy attribution certifications from energy providers, whether bundled with existing energy purchases
or unbundled in certain regions (such purchases are made on an ongoing basis each year); and
– Virtual power purchase agreements to support new renewable energy projects in the United States and Europe.
Also, in 2022, we joined Climate Group's RE100, a global renewable electricity initiative comprised of companies
committed to sourcing 100% of their electricity from renewable sources, and also committed to the Science Based Targets
Initiative (SBTi).
In 2021, we released our Energy Efficiency Playbook into our operations to institutionalize best practices regarding
energy usage. Since its release, this playbook has been used broadly within our global operations on an ongoing basis. We
have also updated our facilities' specifications for new construction and significant building refurbishments to require
more energy efficient systems, such as heating and cooling, wherever practicable.
Furthermore, in 2022, we released additional playbooks specific to waste generation and water usage for implementation
at our global facilities. Like our Energy Efficiency Playbook, these playbooks are focused on promoting sustainable
operating practices within our facilities, while at the same time increasing operational efficiency and potentially reducing
costs.
13
Table of Contents
While the foregoing efforts will help us drive toward the elimination of carbon emissions in those areas we directly
control (Scope 1 and 2 emissions), we are also progressing toward our longer-term overall goal of carbon neutrality across
our value chain (including Scope 3 emissions). Accordingly, we are working to measure our Scope 3 emissions through
the development of product life cycle assessments for our major product offerings. In terms of our supply chain, we are
communicating both our own carbon and renewable energy goals and our expectations of our suppliers as to sustainable
energy usage going forward.
• How We Are Responding to Increased Calls for Product Sustainability
The automotive industry remains focused on the development of sustainable transportation solutions, particularly in light
of the continued focus on climate change and environmental sustainability among governments, non-governmental
organizations, investors, consumers and other stakeholders. This focus is increasing the expectations, and in some cases,
leading to regulatory requirements, that the automotive industry utilize cleaner, more fuel-efficient solutions. In addition,
the advantages of carbon reduction and energy efficiency are expected to make electric vehicles an increasingly popular
choice over time.
Many of our product offerings are designed to capitalize on these evolving regulatory requirements and consumer
preferences, such as electrical distribution and connection systems and BDUs designed for high voltage applications, as
well as our thermal comfort solutions that can increase the efficiency of a vehicle's HVAC system and, in turn, potentially
facilitate an increased range for electric vehicles. Additionally, our intelligent and reconfigurable seats support the trend of
shared mobility.
Our stakeholders' focus on sustainability is aligned with our efforts to develop products that are more environmentally
sustainable. These products include, without limitation, SoyFoamTM, a substitute for certain petroleum-based products,
FlexAirTM, our 100% recyclable non-foam alternative, and ReNewKnitTM, a sustainable sueded alternative material that is
fully recyclable at its end of life and composed of 100% recycled plastic bottles.
We are also committed to working with our suppliers and customers to source raw materials, including leather, in a
sustainable manner. Our leather operations source cattle hides as a by product of the beef industry and are protecting
forests by working to eliminate purchases of such hides from cattle farms involved in deforestation and forest degradation.
Our No Deforestation Policy aligns with industry standards and requires of our suppliers:
– Supply chain transparency, so that all materials supplied to us are from legal sources;
– Land is not clear-cut or burned for production or development; and
– Compliance with governmental laws, regulations and guidelines regarding deforestation.
With respect to the Amazon rainforest, 100% of the direct Brazilian suppliers to our leather operations use georeferencing
technology to confirm that their suppliers did not directly buy cattle from farms involved in deforestation, invasion of
indigenous and protected areas or human rights violations. To monitor our suppliers' compliance with these requirements,
we may conduct audits and/or require third-party verification.
Other ESG-Related Initiatives
We are especially proud of our employee efforts to support our global communities. Through our Operation GIVE campaign at
our Southfield, Michigan headquarters, approximately $1 million in employee contributions benefited local programs focused
on economic well-being, education and the environment in 2022.
Our commitment to human rights is set forth in our Human Rights Policy that clearly defines how we approach, govern and
defend the dignity of people throughout our operations, our global supply chain and the communities in which we operate. In
addition, our Together We Belong program helps fund initiatives that address racial inequality and discrimination through a
combination of grants to external organizations, as well as internal investments to educate and engage our employees.
Our governance activities help ensure that our business and operations are conducted in compliance with all applicable laws, as
well as Lear's policies and procedures, particularly our Code of Business Conduct and Ethics, which addresses conflicts of
interest, bribery and corruption, political contributions and information technology security, among other things. In 2022, we
updated our Code of Business Conduct and Ethics to include additional and enhanced sections on certain of these topics, as well
as on topics such as social media, human rights, and diversity and inclusion. Our Board and its Audit and Governance and
Sustainability Committees oversee our compliance and governance activities. Our expectations related to conducting business
in a sustainable and ethical manner extend to our supply base. Suppliers must meet the requirements of our Supplier
Sustainability Policy and Global Requirements Manual and Code of Conduct for Suppliers. We monitor and assess their
compliance both internally and through the use of a third party.
14
Table of Contents
Human Capital Management
We believe that the best way to deliver the highest quality products and services is to maintain a work environment that
prioritizes safety and fosters collaboration, inclusion, tolerance and respect for our 168,700 employees around the world.
As of December 31, 2022 and 2021, our employment levels worldwide were approximately as follows:
Region
United States and Canada
Mexico
Central and South America
Europe and Africa
Asia
Total
2022
2021
10,200
51,000
22,700
59,000
25,800
168,700
10,200
47,500
19,700
55,100
27,600
160,100
Our compensation and benefits strategy is designed to be competitive in the countries in which we operate to motivate our
employees to perform to the best of their abilities, to achieve our objectives and to align the interests of our employees with the
interests of our stakeholders. Our compensation package includes salary and both performance-based and long-term incentive
programs, as appropriate for each role. We also provide a multitude of market-competitive benefits, which may include
medical, life and disability insurance, contributory retirement savings plan, paid time off, paid parental leave and tuition
reimbursement.
A substantial number of our employees are members of industrial trade unions or national trade organizations. We have
collective bargaining agreements with several North American unions, including the United Auto Workers, Unifor,
International Brotherhood of Electrical Workers and Workers United. In the United States and Canada, each of our unionized
facilities has a separate collective bargaining agreement with the union that represents the workers at such facility, with each
such agreement having an expiration date that is independent of the other agreements. The majority of our employees in Mexico
and Europe are members of industrial trade union organizations or confederations within their respective countries. Many of
these organizations and confederations operate under national contracts, which are not specific to any one employer. We have
infrequently experienced labor disputes at our plants. We have been able to resolve all such labor disputes and believe that our
relations with our employees are generally good.
See Item 1A, "Risk Factors — A significant labor dispute involving us or one or more of our customers or suppliers or that
could otherwise affect our operations could adversely affect our financial performance," and Part II — Item 7, "Management's
Discussion and Analysis of Financial Condition and Results of Operations — Forward-Looking Statements."
Ethics and Compliance
We are committed to conducting our business with integrity and in compliance with all applicable laws of the cities, states and
countries in which we operate, and we have established a Code of Business Conduct and Ethics to assist employees in this
regard. In 2022, we updated our Code of Business Conduct and Ethics to include additional or enhanced sections on certain of
these topics, as well as on topics such as social media, human rights, and diversity and inclusion. We encourage employees to
report concerns through a variety of channels, including a compliance and ethics toll-free number, an online form and a mobile
app, each of which allows for anonymous reporting. Our ethics and compliance team reviews every report and, when
appropriate, conducts an investigation. We also maintain an Anti-Retaliation Policy such that any employee who reports a
concern in good faith is protected from harassment, retaliation or adverse employment consequences.
Health and Safety
Our health and safety programs are designed around global standards with appropriate variations to address the multiple
jurisdictions and unique working environments of our manufacturing operations. Our health and safety management system is
compliant with the ISO 45001 standard, and we are currently implementing a more comprehensive program which combines
ISO 14001 and 45001 requirements to improve efficiency and performance. Each of our locations performs regular safety
audits to ensure that proper safety policies are in place and appropriate safety training is provided. In addition, we engage an
independent third-party conformity assessment and certification vendor to audit selected operations for adherence to our global
health and safety standards.
In 2020, in response to the COVID-19 pandemic, we created a Safe Work Playbook, which provides a standardized approach
for each of our facilities to create a consistent and safe work environment and offers insights into navigating operational
challenges related to the COVID-19 pandemic. The playbook is available to the public and includes health and safety
15
Table of Contents
information related to plant operating protocols; employee education, training and feedback; facility assessments; and phased
reopening of engineering and administrative centers.
Diversity, Equity and Inclusion ("DEI")
We strive to build a culture of diversity, equity and inclusion not only through our human resource policies and practices but
also by actively monitoring pay equity and working to eliminate discrimination and harassment in all of its forms. In 2022, our
employees participated in more than 200,000 hours of DEI and anti-harassment training. In addition, our global executives and
U.S. managers at our Southfield, Michigan headquarters have completed our Connecting with Others DEI training, which helps
our employees identify barriers to inclusion and learn behaviors that both promote inclusion and establish stronger connections.
Our Together We Belong program continues to help our employees learn to navigate difficult conversations, support our
colleagues and celebrate the many facets of diversity. In 2021, we introduced Together We Grow, a merit-based program
designed to help future leaders from historically underrepresented groups build their careers at Lear. We are accomplishing this
by investing in meaningful development and proactive career management and being intentional in advancing and promoting
this talent to management roles and leadership positions. In addition, the program provides an executive sponsor, career
mapping and access to the senior leadership team. By focusing on engagement and relationship building, this program allows
our next generation of leaders to maximize their full potential. We are also proud of our six employee resource groups,
representing 15 countries. Each employee-led resource group is supported by an executive sponsor and is open to all
employees, with a goal of fostering a culture where everyone in our diverse and global workforce feels engaged, accepted and
valued. Over the last two years, the employee resource groups have held over 1,300 events, including lunch and learns,
trainings, and volunteer and social activities.
Training and Talent Development
We are committed to the continued development of our employees. In 2022, we have delivered more than five million hours of
safety, development, leadership, quality, continuous improvement, lean manufacturing, and ISO and IATF certification training.
We offer several professional development and leadership programs in the United States, Europe, Asia, Mexico and South
America. Our CEO Academy is our premier leadership development opportunity. Twice per year, a select group of leaders
representing diverse functions and backgrounds are invited to participate in a week-long leadership immersion event, during
which each participant presents a bold business idea to help drive Lear's success. In addition, formal talent reviews and
succession planning occur annually – globally and across all business areas. Senior leadership provides annual updates on
succession and talent development to the Board.
Employee Engagement and Culture
Launched in 2017, Together We Win is Lear's global employee engagement program focused on driving cultural change in our
operations. Plants advance through four segments — leadership, work environment, employee involvement and team
empowerment. Together We Win unites manufacturing employees across the globe in achieving excellence based on key
operations and employee engagement metrics, such as quality, absenteeism, health and safety performance, and operational
efficiency.
Champions of Lear celebrates our global operations and our hourly and salaried employees who represent the best-of-the-best
in our company. Individuals, teams or plants submit an application which is reviewed by a diverse panel of judges, including
Lear leadership. Award categories honor achievements in culture, customer appreciation, innovation, supply chain, quality,
safety, operational excellence, continuous improvement, sustainability, best launch and best plant collaboration, as well as the
prestigious CEO Special Appreciation Award. In 2021, an additional award category was added to recognize initiatives that
support DEI in the workplace.
Customers
In 2022, General Motors and Ford, two of the largest automotive and light truck manufacturers in the world, accounted for 20%
and 14% of our net sales, respectively. In addition, Mercedes-Benz, Volkswagen and Stellantis accounted for 11%, 11% and
10% of our 2022 net sales, respectively. We supply and have expertise in all vehicle segments of the automotive market. Our
sales content tends to be higher on those vehicle platforms and segments which offer more features and functionality. The
popularity of particular vehicle platforms and segments varies over time and by regional market. We expect to continue to win
new business and grow sales at a greater rate than overall automotive industry production. For further information related to our
customers and domestic and foreign sales and operations, see Note 15, "Segment Reporting," to the consolidated financial
statements included in this Report.
Our customers award business to their suppliers in a number of ways, including the award of complete systems, which allows
suppliers either to manufacture components internally or to purchase components from other suppliers at their
discretion. Certain of our customers also elect to award certain components directly to component suppliers and independent of
16
Table of Contents
the award of the complete system. We have been selectively expanding our component capabilities and investing in
manufacturing capacity in low-cost regions in order to enhance our cost competitive structure and maximize our participation in
such direct component sourcing by our customers.
Our customers typically award contracts several years before actual production is scheduled to begin. Each year, the automotive
manufacturers introduce new models, update existing models and discontinue certain models and, periodically, even complete
brands. In this process, we may be selected as the supplier on a new model, we may continue as the supplier on an updated
model or we may lose the business on a new or updated model to a competitor. Our sales backlog reflects our estimated net
sales over the next three years from formally awarded new programs, less lost and discontinued programs. This measure
excludes the sales backlog at our non-consolidated joint ventures. As of January 2023, our 2023 to 2025 sales backlog is $2.85
billion. Our current sales backlog reflects $1.0 billion related to 2023, of which 63% and 37% is related to our Seating and E-
Systems segments, respectively. In addition, our 2023 to 2025 sales backlog at our non-consolidated joint ventures is
approximately $380 million. Our current sales backlog assumes volumes based on the independent industry projections of S&P
Global Mobility as of December 2022 and internal estimates, a Euro exchange rate of $1.05/Euro and a Chinese renminbi
exchange rate of 7.00/$. This sales backlog is generally subject to a number of risks and uncertainties, including vehicle
production volumes on new and replacement programs and foreign exchange rates, as well as the timing of production launches
and changes in customer development plans. For additional information regarding risks that may affect our sales backlog, see
Item 1A, "Risk Factors," and Part II — Item 7, "Management's Discussion and Analysis of Financial Condition and Results of
Operations — Forward-Looking Statements."
We receive purchase orders from our customers that generally provide for the supply of a customer's annual requirements for a
particular vehicle model and assembly plant, or in some cases, for the supply of a customer's requirements for the life of a
particular vehicle model, rather than for the purchase of a specified quantity of products. Although most purchase orders may
be terminated by our customers at any time, such terminations have been infrequent and have not had a material impact on our
operating results. We are subject to risks that an automotive manufacturer will produce fewer units of a vehicle model than
anticipated or that an automotive manufacturer will not award us a replacement program following the life of a vehicle model.
To reduce our reliance on any one vehicle model, we produce automotive systems and components for a broad cross-section of
both new and established models. However, larger cars and light trucks, as well as vehicle platforms that offer more features
and functionality, such as luxury, sport utility and crossover vehicles, typically have more content and, therefore, tend to have a
more significant impact on our operating performance. Our net sales for the year ended December 31, 2022, consisted of 27%
passenger cars, 54% crossover and sport utility vehicles and 19% trucks and vans.
Our agreements with our major customers generally provide for an annual productivity price reduction. Historically, cost
reductions through product design changes, increased manufacturing productivity and similar programs with our suppliers have
generally offset these customer-imposed price reduction requirements. However, raw material, energy, commodity, product
component and labor costs can be volatile. Although we have developed and implemented strategies to mitigate the impact of
such costs, these strategies, together with commercial negotiations with our customers and suppliers, typically offset only a
portion of the adverse impact. Certain of these strategies also may limit our opportunities in a declining commodity price
environment. In addition, we are exposed to market risk associated with fluctuations in foreign exchange as a result of our low-
cost footprint and vertical integration strategies. We use derivative financial instruments to reduce our exposure to fluctuations
in foreign exchange rates. For additional information regarding our foreign exchange and commodity price risk, see Part II —
Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital
Resources — Commodity Prices" and Item 7A, "Quantitative and Qualitative Disclosures about Market Risk — Market Risk
Sensitivity — Foreign Exchange."
Seasonality
Our principal operations are directly related to the automotive industry. Consequently, we may experience seasonal fluctuations
to the extent automotive vehicle production slows, such as in the summer months when many customer plants close for holidays
and/or model year changeovers, as well as in December when many customer plants close for the holidays.
Raw Materials
The principal raw materials used in our seat systems, electrical distribution and connection systems, BDUs and other electronic
products are generally available and obtained from multiple suppliers under various types of supply agreements. Components
such as seat trim covers, surface materials such as leather and fabric, seat mechanisms, seat foam, thermal comfort solutions
such as seat massage, lumbar, heat and ventilation products, headrests, connection systems and certain other components are
either manufactured by us internally or purchased from multiple suppliers under various types of supply agreements (certain of
which are sourced by our customers and certain of which are sourced by us). The majority of the steel used in our products is
comprised of fabricated components that are integrated into a seat system, such as seat frames, recliner mechanisms, seat tracks
and other mechanical components. Therefore, our exposure to changes in steel prices is primarily indirect, through these
17
Table of Contents
purchased components. With the exception of certain connection systems, the materials that we use to manufacture wire harness
assemblies are substantially purchased from suppliers, including extruded and insulated wire and cable. The majority of our
copper purchases are comprised of extruded wire and cable that we integrate into electrical wire harnesses. In general, our
copper purchases, as well as a significant portion of our leather purchases, are subject to price index agreements with our
customers and suppliers. We utilize a combination of short-term and long-term supply contracts to purchase key components.
We generally retain the right to terminate these agreements if our supplier does not remain competitive in terms of cost, quality,
delivery, technology or customer support.
Intellectual Property
Worldwide, we have approximately 2,600 patents and patent applications pending. While we believe that our patent portfolio is
a valuable asset, no individual patent or group of patents is critical to the success of our business. We also license selected
technologies to automotive manufacturers and to other automotive suppliers. We continually strive to identify and implement
new technologies for use in the design and development of our products.
Advanced technology development is conducted worldwide at our seven advanced technology centers and at our product
engineering centers. At these centers, we engineer our products to comply with applicable safety standards, meet quality and
durability standards, respond to environmental conditions and conform to customer and consumer requirements. Our global
innovation and technology center located in Southfield, Michigan, develops and integrates new concepts and is our central
location for consumer research, benchmarking, craftsmanship and industrial design activity.
We have numerous registered trademarks in the United States and in many foreign countries. The most important of these
marks include LEAR CORPORATION® (including our stylized version thereof) and LEAR®, which are widely used in
connection with our products and services. Our other principal brands include GUILFORD® and EAGLE OTTAWA®.
ConfigurE+TM seating, FlexAirTM non-foam alternative, INTUTM seating, ProTec® active head restraints, ReNewKnitTM fabrics,
SMART JUNCTION BOXTM technology, SoyFoamTM foam substitute, STRUCSURETM systems and TeXstyleTM fabrics are
some of our other trademarks used in connection with certain of our product lines.
Government Regulations and Environmental Matters
We are subject to a variety of federal, state, local and foreign laws and regulations, including those related to health, safety and
environmental matters. Costs incurred to comply with these governmental regulations are not material to our capital
expenditures, financial performance or competitive position. Additional information about the impact of government
regulations on our business is included in Item 1A, "Risk Factors," under the heading "Legal and Regulatory Risks."
We are committed to sustainability in our operations and products. We adhere to local, state, federal and foreign laws,
regulations and ordinances which govern activities or operations that may have adverse environmental effects. These laws,
regulations and ordinances may impose liability for clean-up costs resulting from past spills, disposals or other releases of
hazardous wastes. For a description of our outstanding environmental matters and other legal proceedings, see Note 14,
"Commitments and Contingencies," to the consolidated financial statements included in this Report.
In addition, our customers are subject to significant environmentally focused state, federal and foreign laws and regulations that
regulate vehicle emissions, fuel economy and other matters related to the environmental impact of vehicles. To the extent that
such laws and regulations ultimately increase or decrease automotive vehicle production, such laws and regulations would
likely impact our business. See Item 1A, "Risk Factors."
Furthermore, we currently offer products that advance sustainability, such as ReNewKnitTM, FlexAirTM and SoyFoamTM, and
are creating technologies that facilitate environmentally friendly transportation alternatives, such as hybrid and electric vehicles.
Our expertise, capabilities and environmental leadership are allowing us to expand our product offerings in this area.
18
Table of Contents
Joint Ventures and Noncontrolling Interests
We form joint ventures in order to gain entry into new markets, expand our product offerings and broaden our customer base. In
particular, we believe that certain joint ventures have provided us, and will continue to provide us, with the opportunity to
expand our business relationships with Asian automotive manufacturers, particularly in emerging markets. We also partner with
companies having significant local experience in commerce and customs, as well as capacity, to reduce our financial risk and
enhance our potential for achieving expected financial returns. In some cases, these joint ventures may be located in North
America and used to expand our customer relationships.
As of December 31, 2022, we had sixteen operating joint ventures located in five countries. Of these joint ventures, six are
consolidated, and ten are accounted for using the equity method of accounting. Fourteen of the joint ventures operate in Asia,
and two operate in North America (both of which are dedicated to serving Asian automotive manufacturers). Net sales of our
consolidated joint ventures accounted for approximately 8% of our net sales in 2022. As of December 31, 2022, our
investments in non-consolidated joint ventures totaled $197 million.
A summary of our non-consolidated operating joint ventures, including ownership percentages, is shown below. For further
information related to our joint ventures, see Note 6, "Investments in Affiliates and Other Related Party Transactions," to the
consolidated financial statements included in this Report.
Name
Beijing BHAP Lear Automotive Systems Co., Ltd.
Beijing Lear Hyundai Transys Co., Ltd.
Guangzhou Lear Automotive Components Co., Ltd.
Jiangxi Jiangling Lear Interior Systems Co., Ltd.
Lear Dongfeng Automotive Seating Co., Ltd.
Changchun Lear FAWSN Automotive Seat Systems Co., Ltd.
Shenyang Jinbei Lear Automotive Seating Co. Ltd.
Honduras Electrical Distribution Systems S. de R.L. de C.V.
Country
China
China
China
China
China
China
China
Honduras
United States Kyungshin-Lear Sales and Engineering LLC
India
Hyundai Transys Lear Automotive Private Limited
Ownership
Percentage
50%
50
50
50
50
49
49
49
49
35
19
Table of Contents
ITEM 1A – RISK FACTORS
Our business, financial condition, operating results and cash flows may be impacted by a number of factors. In addition to the
factors affecting our business identified elsewhere in this Report, the material risk factors affecting our operations include the
following:
Risks Related to Our Business
•
Our industry is cyclical and a decline in the production levels of our major customers, particularly with respect to
models for which we are a significant supplier, or the financial distress of one or more of our major customers could
adversely affect our financial performance.
Our sales are driven by the number of vehicles produced by our automotive manufacturer customers, which is ultimately
dependent on consumer demand for automotive vehicles and the availability of raw materials and components, and our
content per vehicle. The automotive industry is cyclical and sensitive to general economic conditions, including
geopolitical issues, global credit markets, interest rates, inflation, consumer credit and consumer spending and preferences.
Automotive sales and production can also be affected by the age of the vehicle fleet and related scrappage rates, labor
relations issues, fuel prices, regulatory requirements, government initiatives, trade agreements, tariffs and other non-tariff
trade barriers, the availability and cost of credit, the cost of critical components needed to complete the production of
vehicles, logistics issues, restructuring actions of our customers and suppliers, facility closures and increased competition,
as well as consumer preferences regarding vehicle size, configuration and features, including alternative fuel vehicles,
changing consumer attitudes toward vehicle ownership and usage, such as ride sharing and on-demand transportation, and
other factors.
Due to the evolving global economic conditions since 2020, initially as a result of the COVID-19 pandemic, the
automotive industry experienced a decline in global customer sales and production volumes. Although industry production
has recovered modestly with production increasing 7% in 2022 compared to 2021, production remains well below recent
historic levels. Industry production in 2022 was approximately 8% below 2019 pre-pandemic levels and 16% below 2017
peak levels. Since 2020, industry and economic conditions have been influenced directly and indirectly by macroeconomic
events such as the COVID-19 pandemic and, beginning in the first quarter of 2022, the Russia-Ukraine conflict, resulting
in unfavorable conditions, including shortages of semiconductor chips and other components, elevated inflation levels,
higher interest rates, and labor and energy shortages in certain markets. These factors, among others, are impacting
consumer demand as well as the ability of automobile manufactures to produce vehicles to meet demand.
As a result, we have experienced and may continue to experience reductions and fluctuations in orders from our customers.
An economic downturn or other adverse industry conditions that result in a decline in the production levels of our major
customers, particularly with respect to models for which we are a significant supplier, or the financial distress of one or
more of our major customers could reduce our sales or otherwise adversely affect our financial condition, operating results
and cash flows. Further, our ability to reduce the risks inherent in certain concentrations of business, and thereby maintain
our financial performance in the future, will depend, in part, on our ability to continue to diversify our sales on a customer,
product, platform and geographic basis to reflect the market overall. We may not be successful in such diversification.
•
Increases in the costs and restrictions on the availability of raw materials, energy, commodities and product components
could adversely affect our financial performance.
Raw material, energy, commodity and product component costs can be volatile. Although we have developed and
implemented strategies to mitigate the impact of such costs, these strategies, together with commercial negotiations with
our customers and suppliers, typically offset only a portion of the adverse impact. Certain of these strategies also may limit
our opportunities in a declining price environment. In addition, the availability of raw materials, energy, commodities and
product components fluctuates from time to time due to factors outside of our control, including trade laws and restrictions,
natural disasters and global pandemics like COVID-19 and resulting supply chain disruptions, and may impact our ability
to meet the production demands of our customers. Currently, due to a variety of global factors, the insufficient availability
of semiconductor chips is adversely affecting, and may continue to adversely affect, a number of industries, including the
automotive industry. Increases in the costs of raw materials, energy, commodities and product components, or restrictions
on the availability thereof, could adversely affect our financial condition, operating results and cash flows.
•
Pandemics or disease outbreaks, such as COVID-19, have disrupted, and may continue to disrupt, our business, which
could adversely affect our financial performance.
Pandemics or disease outbreaks, such as COVID-19, have disrupted, and may continue to disrupt, the global economy.
Furthermore, as was experienced with COVID-19, the measures undertaken by governmental authorities to address such
20
Table of Contents
pandemics or outbreaks, as well as their associated economic, social and other impacts, could significantly disrupt our
operations or prevent us from operating our business in the ordinary course for an extended period of time, lead to declines
in automotive industry production levels or customer demand and/or adversely affect our financial condition, operating
results or cash flows.
For example, the COVID-19 pandemic led to a dramatic reduction in global economic activity in 2020. International,
federal, state and local public health and governmental authorities around the world took (and in some circumstances may
continue to take) extraordinary actions to contain and combat the spread of COVID-19, including travel bans, quarantines,
"stay-at-home" orders and similar mandates. The automotive industry was particularly negatively impacted as automotive
manufacturers suspended or severely limited automotive production globally during portions of 2020 (and, in some
regions, during portions of subsequent years as well). In addition, the automotive industry experienced a sudden and sharp
decline in consumer demand beginning in 2020, as well as various other impacts such as logistics challenges, component
and material shortages, and labor shortages that, in many cases, continued into subsequent years.
If the COVID-19 pandemic were to significantly worsen, or another pandemic or disease outbreak were to emerge, we
could experience further material disruptions in our operating environment related to declines in the production levels of
our major customers, decreases in consumer demand for automotive vehicles, financial distress of one or more of our major
customers or suppliers, or other adverse developments affecting one or more of our suppliers, each of which could
adversely affect our financial performance, as described in more detail under "Our industry is cyclical and a decline in the
production levels of our major customers, particularly with respect to models for which we are a significant supplier, or the
financial distress of one or more of our major customers could adversely affect our financial performance" above and
"Adverse developments affecting or the financial distress of one or more of our suppliers could adversely affect our
financial performance" below.
The ongoing COVID-19 pandemic has exacerbated, and may also continue to exacerbate, other risks disclosed herein,
including, but not limited to, our competitiveness, demand for our products and shifting consumer preferences.
•
The loss of business with respect to, the lack of commercial success of or an increase in directed component sourcing
for a vehicle model for which we are a significant supplier could adversely affect our financial performance.
We receive purchase orders from our customers, which generally provide for the supply of a customer's annual
requirements for a particular vehicle model and assembly plant or, in some cases, for the supply of a customer's
requirements for the life of a particular vehicle model, rather than for the purchase of a specific quantity of products. In
addition, it is possible that our customers could elect to manufacture our products internally or increase the extent to which
they require us to utilize specific suppliers or materials in the manufacture of our products. The loss of business with
respect to, the lack of commercial success of or an increase in directed component sourcing for a vehicle model for which
we are a significant supplier could reduce our sales or margins and thereby adversely affect our financial condition,
operating results and cash flows.
•
Our inability to achieve product cost reductions to offset customer-imposed price reductions could adversely affect our
financial performance.
Downward pricing pressure by automotive manufacturers is a characteristic of the automotive industry. Our customer
contracts generally provide for annual price reductions over the production life of the vehicle, while requiring us to assume
significant responsibility for the design, development and engineering of our products. Prices may also be adjusted on an
ongoing basis to reflect changes in product content/costs and other commercial factors. Our financial performance is
largely dependent on our ability to achieve product cost reductions through product design enhancements and supply chain
management, as well as manufacturing efficiencies and restructuring actions. We also seek to enhance our financial
performance by investing in product development, design capabilities and new product initiatives that respond to the needs
of our customers and consumers. We continually evaluate operational and strategic alternatives to align our business with
the changing needs of our customers and improve our business structure by investing in vertical integration opportunities
globally. Our inability to achieve product cost reductions that offset customer-imposed price reductions could adversely
affect our financial condition, operating results and cash flows.
•
Adverse developments affecting or the financial distress of one or more of our suppliers could adversely affect our
financial performance.
We obtain components and other products and services from numerous automotive suppliers and other vendors throughout
the world. We are responsible for managing our supply chain, including suppliers that may be the sole sources of products
that we require, that our customers direct us to use or that have unique capabilities that would make it difficult and/or
expensive to re-source. In certain instances, entire industries may experience short-term capacity constraints. Additionally,
our production capacity, and that of our customers and suppliers, may be adversely affected by natural disasters or other
21
Table of Contents
significant disruptions. Any such significant disruption could adversely affect our financial performance. Furthermore,
unfavorable economic or industry conditions could result in financial distress within our supply base, thereby increasing
the risk of supply disruption. An economic downturn or other unfavorable industry conditions in one or more of the regions
in which we operate could cause a supply disruption and thereby adversely affect our financial condition, operating results
and cash flows.
•
A significant labor dispute involving us or one or more of our customers or suppliers or that could otherwise affect our
operations could adversely affect our financial performance.
A substantial number of our employees and the employees of our largest customers and suppliers are members of industrial
trade unions and are employed under the terms of various labor agreements. We have labor agreements covering
approximately 81,300 employees globally. In the United States and Canada, each of our unionized facilities has a separate
collective bargaining agreement with the union that represents the workers at such facility, with each such agreement
having an expiration date that is independent of the other agreements. Labor agreements covering approximately 74% of
our global unionized work force, including labor agreements in the United States and Canada covering approximately 2%
of our global unionized workforce, are scheduled to expire in 2023. There can be no assurances that these upcoming
negotiations or any other future negotiations with the unions will be resolved favorably or that we will not experience a
work stoppage or disruption that could adversely affect our financial condition, operating results and cash flows. A labor
dispute involving us, any of our customers or suppliers or any other suppliers to our customers or that otherwise affects our
operations, or the inability by us, any of our customers or suppliers or any other suppliers to our customers to negotiate,
upon the expiration of a labor agreement, an extension of such agreement or a new agreement on satisfactory terms could
adversely affect our financial condition, operating results and cash flows. In addition, if any of our significant customers
experience a material work stoppage, the customer may halt or limit the purchase of our products. This could require us to
shut down or significantly reduce production at facilities relating to such products, which could adversely affect our
business and harm our profitability.
•
Our ability to attract, develop, engage and retain qualified employees could affect our ability to execute our strategy.
Our success depends, in part, on our ability to identify and attract qualified candidates with the requisite education,
background and experience, as well as our ability to develop, engage and retain qualified employees. Failure to attract,
develop, engage and retain qualified employees, whether as a result of an insufficient number of qualified applicants,
difficulty in recruiting new employees or inadequate resources to train, integrate and retain qualified employees, could
impair our ability to execute our business strategy and could adversely affect our business. In addition, while we strive to
reduce the impact of the departure of employees, our operations and/or our ability to execute our business strategy and
meet our business objectives may be affected by the loss of employees, particularly when departures involve larger
numbers of employees. Higher rates of employee separations may adversely affect us through decreased employee morale,
the loss of knowledge of departing employees and the devotion of resources to recruiting and onboarding new employees.
•
Our substantial international operations make us vulnerable to risks associated with doing business in foreign
countries.
As a result of our global presence, a significant portion of our revenues and expenses are denominated in currencies other
than the U.S. dollar. We have substantial manufacturing and distribution facilities in many foreign countries, including
Mexico and countries in Africa, Asia, Central and South America and Europe. International operations are subject to
certain risks inherent in doing business abroad, including:
•
•
•
•
•
•
•
•
•
•
exposure to local economic conditions;
political, economic and civil instability and uncertainty (including acts of terrorism, civil unrest, drug-cartel related
and other forms of violence and outbreaks of war);
labor unrest;
expropriation and nationalization;
currency exchange rate fluctuations, currency controls and the ability to economically hedge currencies;
withholding and other taxes on remittances and other payments by subsidiaries;
investment restrictions or requirements;
repatriation restrictions or requirements;
export and import restrictions and increases in duties and tariffs;
concerns about human rights, working conditions and other labor rights and conditions and the environmental impact
in foreign countries where our products are produced and raw materials and/or components are sourced, as well as
changing labor, environmental and other laws in these countries;
22
Table of Contents
•
•
•
pandemic illness;
increases in working capital requirements related to long supply chains; and
global sovereign fiscal matters and creditworthiness, including potential defaults and the related impacts on economic
activity, including the possible effects on credit markets, currency values, monetary unions, international treaties and
fiscal policies.
Expanding our sales and operations in lower-cost regions are important elements of our strategy. As a result, our exposure
to the risks described above is substantial. The likelihood of such occurrences and their potential effect on us vary from
country to country and are unpredictable. However, any such occurrences could adversely affect our financial condition,
operating results and cash flows.
•
Certain of our operations are conducted through joint ventures which have unique risks.
Certain of our operations, particularly in Asia, are conducted through joint ventures. With respect to our joint ventures, we
may share ownership and management responsibilities with one or more partners that may not share our goals and
objectives. Operating a joint venture requires us to operate the business pursuant to the terms of the agreement that we
entered into with our partners, including additional organizational formalities, as well as to share information and decision
making. Additional risks associated with joint ventures include one or more partners failing to satisfy contractual
obligations, conflicts arising between us and any of our partners, a change in the ownership of any of our partners and less
of an ability to control compliance with applicable rules and regulations, including the Foreign Corrupt Practices Act and
related rules and regulations. Additionally, our ability to sell our interest in a joint venture may be subject to contractual
and other limitations. Accordingly, any such occurrences could adversely affect our financial condition, operating results
and cash flows.
•
Our failure to execute our strategic objectives could adversely affect our financial performance.
Our financial performance depends, in part, on our ability to successfully execute our strategic objectives. Our objectives
are to deliver superior long-term stockholder value by investing in innovation to drive business growth and profitability,
while maintaining a strong balance sheet and returning excess cash to our stockholders. Various factors, including the
industry environment and the other matters described herein and in Part II — Item 7, "Management's Discussion and
Analysis of Financial Condition and Results of Operations," including "— Forward-Looking Statements," could adversely
affect our ability to execute our strategic objectives. These risk factors include our failure to identify suitable opportunities
for organic investment and/or acquisitions, our inability to successfully develop such opportunities or complete such
acquisitions or our inability to successfully utilize or integrate the investments in our operations. Our failure to execute our
strategic objectives could adversely affect our financial condition, operating results and cash flows. Moreover, there can be
no assurances that, even if implemented, our strategic objectives will be successful.
•
Our inability to effectively manage the timing, quality and costs of new program launches could adversely affect our
financial performance.
In connection with the award of new business, we obligate ourselves to deliver new products and services that are subject
to our customers' timing, performance and quality standards. Additionally, as a Tier 1 supplier, we must effectively
coordinate the activities of numerous suppliers in order for the program launches of our products to be successful. Given
the complexity of new program launches, we may experience difficulties managing product quality, timeliness and
associated costs. In addition, new program launches require a significant ramp up of costs; however, our sales related to
these new programs generally are dependent upon the timing and success of our customers' introduction of new vehicles.
Our inability to effectively manage the timing, quality and costs of these new program launches could adversely affect our
financial condition, operating results and cash flows.
• We operate in a highly competitive industry and efforts by our competitors, as well as new non-traditional entrants to
the industry, to gain market share could adversely affect our financial performance.
We operate in a highly competitive industry. We and most of our competitors are seeking to expand market share with new
and existing customers, including in high growth regions. Our customers award business based on, among other things,
price, quality, service and technology. Our competitors' efforts to grow market share could exert downward pressure on our
product pricing and margins. In addition, the automotive industry has attracted, and will continue to attract, non-traditional
entrants as a result of the evolving nature of the automotive vehicle market, including autonomous vehicles, ride sharing
and on-demand transportation. Further, the global automotive industry is experiencing a period of significant technological
change, including a focus on environmentally sustainable vehicles and subcomponents. As a result, the success of portions
of our business requires us to develop, acquire and/or incorporate new technologies and depends not only on our customers'
ability to execute their strategies to exploit these technologies but also on the adoption of such technologies by end
23
Table of Contents
consumers. Such technologies are subject to rapid obsolescence. Our inability to maintain access to these technologies
(through development, acquisition or licensing) may adversely affect our ability to compete. If we are unable to
differentiate our products, maintain a low-cost footprint or compete effectively with technology-focused new market
entrants, we may lose market share or be forced to reduce prices, thereby lowering our margins. Any such occurrences
could adversely affect our financial condition, operating results and cash flows.
•
If we do not respond appropriately, the evolution of the global transportation industry toward electrification and shared
mobility could adversely affect our business.
The global transportation industry is increasingly focused on the development of more fuel-efficient solutions to meet
demands from consumers and governments worldwide to address climate change and an increased desire for
environmentally sustainable solutions. The impacts of these changes on us are uncertain and could ultimately prove
dramatic. If we do not respond appropriately, the evolution toward electrification and other energy sources could adversely
affect our business. The increased adoption of electrified and other non-internal combustion-based powertrains, such as
fuel cells, may result in lower demand for some of our products. There has also been an increase in consumer preferences
for car and ride sharing, as opposed to automobile ownership, which may result in a long-term reduction in the number of
vehicles per capita. The evolution of the industry toward electrification and shared mobility has also attracted increased
competition from entrants outside of the traditional light vehicle industry, some of whom may seek to provide products
which compete with ours. Failure to innovate and to develop or acquire new and compelling products that capitalize upon
new technologies in response to these evolving consumer preferences and demands could adversely affect our financial
condition, operating results and cash flows.
•
An emphasis on global climate change and other ESG matters by various stakeholders could negatively affect our
business.
Customer, investor, employee and other stakeholder expectations of us and our supply base in areas such as the
environment, social matters and corporate governance have been rapidly evolving and increasing. The enhanced
stakeholder focus on ESG requires the continuous monitoring of various and evolving standards and their associated
requirements. Our failure, or that of our supply base, to adequately meet stakeholder expectations may result in, among
other things, the loss of business, diluted market valuation, an inability to attract customers or an inability to attract and
retain top talent.
•
Global climate change could negatively affect our business.
The effects of climate change, such as extreme weather conditions, could impact our business. Such effects could disrupt
our operations by impacting the availability and cost of materials needed for manufacturing and could increase insurance
and other operating costs. These factors may impact our decisions to construct new facilities or maintain existing facilities
in areas most prone to physical climate risks. We could also experience indirect financial risks passed through the supply
chain and disruptions that could result in increased prices for our products and the resources needed to produce them.
•
Impairment charges relating to our goodwill and long-lived assets could adversely affect our financial performance.
We regularly monitor our goodwill and long-lived assets for impairment indicators. In conducting our goodwill impairment
testing, we may first perform a qualitative assessment of whether it is more likely than not that a reporting unit's fair value
is less than its carrying amount. If not, no further goodwill impairment testing is required. If it is more likely than not that a
reporting unit's fair value is less than its carrying amount, or if we elect not to perform a qualitative assessment of a
reporting unit, we then compare the fair value of the reporting unit to the related net book value. If the net book value of a
reporting unit exceeds its fair value, an impairment loss is measured and recognized. In conducting our impairment analysis
of long-lived assets, we compare the undiscounted cash flows expected to be generated from the long-lived assets to the
related net book values. Changes in economic or operating conditions impacting our estimates and assumptions could result
in the impairment of our goodwill or long-lived assets. In the event that we determine that our goodwill or long-lived assets
are impaired, we may be required to record a significant charge to earnings that could adversely affect our financial
condition and operating results.
•
Significant changes in discount rates, the actual return on pension assets and other factors could adversely affect our
financial performance.
Our earnings may be positively or negatively impacted by the amount of income or expense recorded related to our global
defined benefit plans. Accounting principles generally accepted in the United States require that income or expense related
to the defined benefit plans be calculated at the annual measurement date using actuarial calculations, which reflect certain
assumptions. The most significant of these assumptions relate to interest rates, the capital markets and other economic
24
Table of Contents
conditions. These assumptions, as well as the actual value of pension assets at the measurement date, will impact the
calculation of pension and other postretirement benefit expense for the year. Although pension expense and pension
contributions are not directly related, the key economic indicators that affect pension expense also affect the amount of
cash that we will contribute to our pension plans. Because interest rates and the values of these pension assets have
fluctuated and will continue to fluctuate in response to changing market conditions, pension and other postretirement
benefit expense in subsequent periods, the funded status of our pension plans and the future minimum required pension
contributions, if any, could adversely affect our financial condition, operating results and cash flows.
Risks Related to Our Indebtedness
•
Our existing indebtedness and the inability to access capital markets could restrict our business activities or our ability
to execute our strategic objectives or adversely affect our financial performance.
As of December 31, 2022, we had approximately $2.6 billion of outstanding indebtedness, as well as $2.0 billion available
for borrowing under our revolving credit facility. As of December 31, 2022, there were no amounts outstanding under our
revolving credit facility. The debt instruments governing our indebtedness contain covenants that may restrict our business
activities or our ability to execute our strategic objectives, and our failure to comply with these covenants could result in a
default under our indebtedness. We also lease certain buildings and equipment under non-cancelable lease agreements with
terms exceeding one year, which are accounted for as operating leases. Additionally, any downgrade in the ratings that
rating agencies assign to us and our debt may ultimately impact our access to capital markets. Our inability to generate
sufficient cash flow to satisfy our debt and lease obligations, to refinance our debt obligations or to access capital markets
on commercially reasonable terms could adversely affect our financial condition, operating results and cash flows.
Legal and Regulatory Risks
•
A disruption in our information technology systems, or those of our customers or suppliers, including a disruption
related to cybersecurity, could adversely affect our financial performance.
We rely on the accuracy, capacity and security of our information technology networks. Despite the security measures that
we have implemented, including those measures related to cybersecurity, our operational systems (including business,
financial, accounting, human resources, product development and manufacturing processes), as well as those of our
customers, suppliers and other service providers, and certain of our connected vehicle systems and components that may
collect and store sensitive end-user data (which could include personally identifiable information) could be breached or
damaged by computer viruses, malware, phishing attacks, denial-of-service attacks, human error, natural or man-made
incidents or disasters or unauthorized physical or electronic access. These types of incidents have become more prevalent
and pervasive across industries, including our industry, and are expected to continue, if not increase, in the future. The
secure operation of our information technology networks, and the processing and maintenance of information by these
networks, is critical to our operations and strategy. A breach could result in business disruption, including the vehicle
systems and components that we supply to our customers or our plant operations, theft of our intellectual property, trade
secrets or customer information or unauthorized access to personal information, such as that of our employees or end
consumers of vehicles that contain certain of our connected vehicle systems or components. Although cybersecurity and
the continued development and enhancement of our controls, processes and practices designed to protect our operational
systems and products from attack, damage or unauthorized access are a high priority for us, our actions and investments
may not be deployed quickly enough or successfully protect our systems against all vulnerabilities, including technologies
developed to bypass our security measures. In addition, outside parties may attempt to fraudulently induce employees or
customers to disclose access credentials or other sensitive information in order to gain access to our secure systems and
networks. There are no assurances that our actions and investments to improve the maturity of our systems, processes and
risk management framework or remediate vulnerabilities will be sufficient or deployed quickly enough to prevent or limit
the impact of any cyber intrusion or security breach. Moreover, because the techniques used to gain access to or sabotage
systems often are not recognized until launched against a target, we may be unable to anticipate the methods necessary to
defend against these types of attacks, and we cannot predict the extent, frequency or impact these attacks may have on us.
To the extent that our business is interrupted, including the vehicle systems and components that we supply to our
customers or our plant operations, or data is lost, destroyed or inappropriately used or disclosed, such disruptions could
adversely affect our competitive position, relationships with our customers, financial condition, operating results and cash
flows and/or subject us to regulatory actions, including those contemplated by data privacy laws and regulations like the
European Union General Data Privacy Regulation and California Consumer Privacy Act, or litigation. In addition, we may
be required to incur significant costs to protect against the damage caused by these disruptions or security breaches in the
future.
25
Table of Contents
We are also dependent on security measures that some of our customers, suppliers and other third-party service providers
take to protect their own systems and infrastructures. Any security breach of any of these third-parties' systems could result
in unauthorized access to our or our customers' or suppliers' sensitive data or our own information technology systems,
cause us to be non-compliant with applicable laws or regulations, subject us to legal claims or proceedings, disrupt our
operations, damage our reputation or cause a loss of confidence in our products or services, any of which could adversely
affect our financial performance.
•
A significant product liability lawsuit, warranty claim or product recall involving us or one of our major customers
could adversely affect our financial performance.
In the event that our products fail to perform as expected, regardless of fault, and such failure results in, or is alleged to
result in, bodily injury and/or property damage or other losses, we may be subject to product liability lawsuits and other
claims or we may be required or requested by our customers to participate in a recall or other corrective action involving
such products. We also are a party to agreements with certain of our customers, whereby these customers may pursue
claims against us for contribution of all or a portion of the amounts sought in connection with product liability and
warranty claims. We carry insurance for certain product liability claims, but such coverage may be limited. We do not
maintain insurance for product warranty or recall matters. In addition, we may not be successful in recovering amounts
from third parties, including sub-suppliers, in connection with these claims. These types of claims could adversely affect
our financial condition, operating results and cash flows.
• We are involved from time to time in various legal and regulatory proceedings and claims, which could adversely affect
our financial performance.
We are involved in various legal and regulatory proceedings and claims that, from time to time, are significant. These are
typically claims that arise in the normal course of business, including, without limitation, commercial or contractual
disputes, including disputes with our customers, suppliers or competitors, intellectual property matters, personal injury
claims, environmental matters, tax matters, employment matters and antitrust matters. No assurances can be given that such
proceedings and claims will not adversely affect our financial condition, operating results and cash flows.
•
Increasing focus on environmental laws and regulations globally could cause us to incur significant costs.
Concerns over environmental pollution and climate change have produced significant legislative and regulatory efforts
globally, and we believe that this will continue both in scope and in the number of countries participating. In addition, as
climate change issues become more prevalent, foreign, federal, state and local governments and our customers have been
responding to these issues. The increased focus on environmental sustainability may result in new regulations and customer
requirements, or changes in current regulations and customer requirements, which could adversely affect our business,
financial condition and operating results. If we are unable to effectively manage real or perceived issues, including
concerns about environmental impacts or similar matters, sentiments toward us or our products could be negatively
impacted, and our business, financial condition and operating results could be adversely affected.
Changing government regulations related to greenhouse gas emissions and energy efficiency and growing recognition
among consumers of the dangers of climate change may also require increasing levels of innovation and change at the
product/production process level. These trends may also prompt automotive manufacturers to accelerate commitments to
carbon neutrality, which could in turn prompt us to make changes at the product/production process level. This could
require additional cost and/or investment to make products/production processes compliant and/or carbon neutral.
•
New laws or regulations or changes in existing laws or regulations could adversely affect our financial performance.
We and the automotive industry are subject to a variety of federal, state, local and foreign laws and regulations, including
those related to health, safety and, increasingly, ESG matters. Governmental regulations also affect taxes and levies, capital
markets, healthcare costs, energy usage, data privacy, international trade and immigration, human rights and other labor
issues, all of which may have a direct or indirect effect on our business and the businesses of our customers and suppliers.
We cannot predict the substance or impact of pending or future legislation or regulations, or the application thereof. The
introduction of new laws or regulations or changes in existing laws or regulations, or the interpretation thereof, could
increase the costs of doing business for us or our customers or suppliers or restrict our actions and adversely affect our
financial condition, operating results and cash flows.
• We are subject to regulation of our international operations that could adversely affect our financial performance.
We are subject to many laws governing our international operations, such as those that pertain to data privacy and human
rights, prohibit improper payments to government officials and restrict where we can do business and what information or
products we can supply to or purchase from certain countries or third parties, including but not limited to the Foreign
26
Table of Contents
Corrupt Practices Act and the U.S. Export Administration Act. Violations of these laws, which are complex, may conflict
with laws of other jurisdictions and often are difficult to interpret and apply, could result in significant fines, criminal
penalties or sanctions that could adversely affect our reputation, business, financial condition, operating results and cash
flows.
• We are required to comply with environmental laws and regulations that could cause us to incur significant costs.
Our manufacturing facilities are subject to numerous laws and regulations designed to protect the environment, and we
expect that additional requirements with respect to environmental matters will be imposed on us and our customers in the
future. Material future expenditures may be necessary if compliance standards change or material unknown conditions that
require remediation are discovered. Environmental laws could also restrict our ability to expand our facilities or could
require us to acquire costly equipment or to incur other significant expenses in connection with our business. If we fail to
comply with present and future environmental laws and regulations, we could be subject to future liabilities, which could
adversely affect our financial condition, operating results and cash flows.
•
•
Developments or assertions by or against us relating to intellectual property rights could adversely affect our financial
performance.
We own significant intellectual property, including a large number of patents, trademarks, copyrights and trade secrets, and
we are involved in numerous licensing arrangements. Our intellectual property plays an important role in maintaining our
competitive position in a number of the markets that we serve. Developments or assertions by or against us relating to
intellectual property rights could adversely affect our financial condition, operating results and cash flows.
Changes in U.S. administrative policy, including changes to existing trade agreements and any resulting changes in
international relations, could adversely affect our financial performance.
As a result of changes to U.S. administrative policy, among other possible changes, there may be (i) changes in policies
pertaining to the environment; (ii) changes to existing trade agreements; (iii) greater restrictions on free trade generally;
and (iv) significant increases in customs duties and tariffs on goods imported into the United States. The United States-
Mexico-Canada Agreement ("USMCA"), which serves as the successor agreement to the North American Free Trade
Agreement ("NAFTA"), became effective on July 1, 2020. There can be no assurance that the ongoing transition to the
higher North American automotive content requirements in the USMCA will not adversely affect our business. The United
States still maintains significant tariffs on most imports from China. It remains unclear what specific actions the current
U.S. administration may take to resolve trade-related issues with China and other countries. A trade war, other
governmental action related to tariffs or international trade agreements, changes in U.S. social, political, regulatory and
economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the
territories and countries where we currently manufacture and sell products or any resulting negative sentiments toward the
United States could adversely affect our business, financial condition, operating results and cash flows.
None.
ITEM 1B – UNRESOLVED STAFF COMMENTS
ITEM 2 – PROPERTIES
As of December 31, 2022, our properties include just-in-time manufacturing facilities, component manufacturing facilities,
sequencing and distribution sites, and dedicated administrative/technical support facilities in 37 countries. A summary of these
properties by operating segment and by region is shown below:
Seating
E-Systems
North America
Europe and Africa
Asia
South America
Total
61
15
76
69
27
96
36
16
52
11
4
15
177
62
239
In addition, we have 14 general administrative/technical support facilities. Our properties include seven advanced technology
centers (one at our corporate headquarters in Southfield, Michigan, one additional in North America, two in Europe and three in
Asia). Of our 253 total properties, 94 are owned and 159 are leased.
27
Table of Contents
Legal and Environmental Matters
ITEM 3 – LEGAL PROCEEDINGS
We are involved from time to time in various legal proceedings and claims, including, without limitation, commercial or
contractual disputes, product liability claims and environmental legal claims and other matters. For a description of risks related
to various legal proceedings and claims, see Item 1A, "Risk Factors." For a description of our outstanding material legal
proceedings, see Note 14, "Commitments and Contingencies," to the consolidated financial statements included in this Report.
Not applicable.
ITEM 4 – MINE SAFETY DISCLOSURES
28
Table of Contents
SUPPLEMENTARY ITEM – INFORMATION ABOUT OUR EXECUTIVE OFFICERS
The following table sets forth the names, ages and positions of our executive officers. Executive officers are appointed annually
by our Board of Directors (the "Board") and serve at the pleasure of our Board.
Name
Jason M. Cardew
Alicia J. Davis
Amy A. Doyle
Carl A. Esposito
Harry A. Kemp
Frank C. Orsini
Raymond E. Scott
Age
52
52
Senior Vice President and Chief Financial Officer
Senior Vice President and Chief Strategy Officer
Position
55 Vice President and Chief Accounting Officer
55
47
50
57
Senior Vice President and President, E-Systems
Senior Vice President, Chief Administrative Officer and General Counsel
Executive Vice President and President, Seating
President and Chief Executive Officer
Marianne Vidershain
43 Vice President and Treasurer
Set forth below is a description of the business experience of each of our executive officers.
Jason M. Cardew
Alicia J. Davis
Amy A. Doyle
Carl A. Esposito
Harry A. Kemp
Mr. Cardew is the Company's Senior Vice President and Chief Financial Officer, a position he has
held since November 2019. Mr. Cardew most recently served as the Company's Vice President,
Finance - Seating and E-Systems since September 2018. Prior to that, he served as the Company's
Vice President, Finance - Seating since April 2012. Previously, he served as the Company's Vice
President and Interim Chief Financial Officer since September 2011, Vice President, Finance -
Financial Planning and Analysis since April 2010, Vice President, Finance - Seating since 2008, Vice
President - Finance since 2003 and in various financial roles since joining the Company in 1992.
Ms. Davis is the Company's Senior Vice President and Chief Strategy Officer, a position she has held
since May 2021. Ms. Davis most recently served as the Company's Senior Vice President, Corporate
Development and Investor Relations since September 2019. Prior to that, she served as the Company's
Vice President, Investor Relations since joining the Company in August 2018. Prior to joining the
Company, Ms. Davis was on the faculty at the University of Michigan Law School since June 2004,
where she most recently served as a tenured professor, a position she still holds via an unpaid
appointment, and the Associate Dean for Strategic Initiatives. Previous to that, she was a lawyer at
Kirkland & Ellis since June 2002, a Vice President at Raymond James & Associates since August
1999 and an Investment Banking Analyst at Goldman Sachs from August 1993 to June 1995.
Ms. Doyle is the Company's Vice President and Chief Accounting Officer, a position she has held
since May 2017. Ms. Doyle most recently served as the Company's Assistant Corporate Controller
since September 2006. Previously, she served in positions of increasing responsibility at the
Company, including Director, Financial Reporting since 2003 and Manager, Financial Reporting since
joining the Company in 1999. Prior to joining the Company, Ms. Doyle served as an audit manager
for Arthur Andersen LLP.
Mr. Esposito is the Company's Senior Vice President and President, E-Systems, a position he has held
since joining the Company in September 2019. Prior to joining the Company, Mr. Esposito served at
Honeywell Aerospace, a division of Honeywell International Inc., as President of the Electronic
Solutions Strategic Business Unit from January 2017 to July 2019 and at Honeywell International Inc.
as Vice President of Aerospace Marketing, Product Management and Strategy since December 2010,
Vice President of Avionics Systems Marketing and Product Management since December 2009, Vice
President of Global Business Aviation Sales and EMEAI Customer Support since January 2007 and in
various other roles since 1990.
Mr. Kemp is the Company's Senior Vice President, Chief Administrative Officer and General
Counsel, a position he has held since January 2023. In this role, Mr. Kemp has responsibility for the
Company's Compliance and Environmental, Social and Governance activities. Mr. Kemp most
recently served as the Company's Senior Vice President, General Counsel and Corporate Secretary
since August 2019. Prior to that, Mr. Kemp served as the Company's Vice President and Corporate
Counsel since January 2019. Previously, he served as the Company's Vice President and Divisional
Counsel - Seating since September 2016 and Vice President and Divisional Counsel - E-Systems since
joining the Company in December 2009. Prior to joining the Company, Mr. Kemp was a partner at
Bodman PLC since 2003 and served as an engagement manager at McKinsey and Company, a global
management consulting firm, since 2000.
29
Table of Contents
Frank C. Orsini
Raymond E. Scott
Mr. Orsini is the Company's Executive Vice President and President, Seating, a position he has held
since March 2018. Mr. Orsini most recently served as the Company's Senior Vice President and
President, E-Systems since September 2012. Prior to that, he served as the Company's Vice President
and Interim President, E-Systems since October 2011. Previously, he served as the Company's Vice
President, Operations, E-Systems since 2009, Vice President, Sales, Program Management &
Manufacturing, E-Systems since 2008, Vice President, North America Seating Operations since 2005
and in various other management positions since joining the Company in 1994.
Mr. Scott is the Company's President and Chief Executive Officer, a position he has held since March
2018. Mr. Scott most recently served as the Company's Executive Vice President and President,
Seating since November 2011. Prior to that, he served as the Company's Senior Vice President and
President, E-Systems since February 2008. Previously, he served as the Company's Senior Vice
President and President, North American Seat Systems Group since August 2006, Senior Vice
President and President, North American Customer Group since June 2005, President, European
Customer Focused Division since June 2004 and President, General Motors Division since November
2000.
Marianne Vidershain Ms. Vidershain is the Company's Vice President and Treasurer, a position she has held since February
2021. Ms. Vidershain most recently served as the Company's Assistant Treasurer since January 2018.
Prior to that, she served as the Company's Director, Global Financial Planning & Analysis since
January 2015. Previously, she served as the Company's Director, Finance – Global Purchasing since
February 2014, Director, Capital Markets and Subsidiary Finance since April 2010, Treasury Manager
since January 2007 and in various other treasury positions since joining the Company in 2004.
30
Table of Contents
PART II
ITEM 5 – MARKET FOR THE COMPANY'S COMMON EQUITY,
RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock is listed on the New York Stock Exchange under the symbol "LEA."
Dividends
We currently expect to pay quarterly cash dividends in the future, although such payments are at the discretion of our Board of
Directors (the "Board") and will depend upon our financial condition, results of operations, capital requirements, alternative
uses of capital and other factors that our Board may consider at its discretion. See Item 7, "Management's Discussion and
Analysis of Financial Condition and Results of Operations — Forward-Looking Statements," and Note 12, "Capital Stock,
Accumulated Other Comprehensive Loss and Equity," to the consolidated financial statements included in this Report.
Holders of Common Stock
The Transfer Agent and Registrar for our common stock is Computershare Trust Company, N.A., located in Canton,
Massachusetts. On February 6, 2023, there were 245 registered holders of record of our common stock.
For certain information regarding our equity compensation plans, see Part III — Item 12, "Security Ownership of Certain
Beneficial Owners and Management and Related Stockholder Matters — Equity Compensation Plan Information."
Common Stock Share Repurchase Program
Since the first quarter of 2011, our Board has authorized $6.1 billion in share repurchases under our common stock share
repurchase program. As of December 31, 2022, we have repurchased, in aggregate, $4.9 billion of our outstanding common
stock, at an average price of $91.55 per share, excluding commissions and related fees, and have a remaining repurchase
authorization of $1.2 billion, which expires on December 31, 2024.
We may implement share repurchases through a variety of methods, including, but not limited to, open market purchases,
accelerated stock repurchase programs and structured repurchase transactions. The extent to which we may repurchase our
outstanding common stock and the timing of such repurchases will depend upon our financial condition, results of operations,
capital requirements, prevailing market conditions, alternative uses of capital and other factors. See Item 7, "Management's
Discussion and Analysis of Financial Condition and Results of Operations — Forward-Looking Statements," and Note 12,
"Capital Stock, Accumulated Other Comprehensive Loss and Equity," to the consolidated financial statements included in this
Report.
A summary of the shares of our common stock repurchased during the fiscal quarter ended December 31, 2022, is shown
below:
Period
October 2, 2022 through October 29, 2022
October 30, 2022 through November 26, 2022
November 27, 2022 through December 31, 2022
Total
Total Number
of Shares
Purchased
Average
Price Paid
per Share
143,844 $ 126.38
34,295 $ 133.11
17,758 $ 132.69
195,897 $ 128.13
Total Number of Shares
Purchased as Part of
Publicly Announced
Plans or Programs
Approximate Dollar
Value of Shares that
May Yet be Purchased
Under the Program
(in millions)
143,844 $
34,295
17,758
195,897 $
1,236.3
1,231.7
1,229.4
1,229.4
31
Table of Contents
Performance Graph
The following graph compares the cumulative total stockholder return from December 31, 2017 through December 31, 2022,
for our common stock, the S&P 500 Index and a peer group (1) of companies that we have selected for purposes of this
comparison. We have assumed that dividends have been reinvested, and the returns of each company in the S&P 500 Index and
the peer group have been weighted to reflect relative stock market capitalization. The graph below assumes that $100 was
invested on December 31, 2017, in each of our common stock, the stocks comprising the S&P 500 Index and the stocks
comprising the peer group.
Lear Corporation
S&P 500
Peer Group (1)
December 31,
2017
December 31,
2018
December 31,
2019
December 31,
2020
December 31,
2021
December 31,
2022
$ 100.00 $
$ 100.00 $
$ 100.00 $
70.71 $
95.61 $
61.30 $
80.87 $
94.54 $
125.70 $ 148.82 $
90.16 $
76.59 $
109.86 $
191.49 $
98.09 $
76.15
156.78
65.60
(1) We do not believe that there is a single published industry or line of business index that is appropriate for comparing
stockholder returns. As a result, we have selected a peer group comprised of representative independent automotive
suppliers whose common stock is publicly traded. Our peer group, referenced in the graph above, consists of Adient plc,
American Axle & Manufacturing Holdings Inc., Aptiv PLC, Autoliv, Inc., BorgWarner Inc., Continental AG, Cooper-
Standard Holdings Inc., Dana Incorporated, Faurecia, Gentex Corporation, Gentherm Incorporated, Magna International,
Inc., Valeo and Visteon Corporation.
ITEM 6 – RESERVED
32
Table of Contents
ITEM 7 – MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF
OPERATIONS
Executive Overview
We are a global automotive technology leader in Seating and E-Systems, enabling superior in-vehicle experiences for
consumers around the world. We supply complete seat systems, key seat components, electrical distribution and connection
systems, battery disconnect units ("BDUs") and other electronic products to all of the world's major automotive manufacturers.
Lear is built on a foundation and strong culture of innovation, operational excellence, and engineering and program
management capabilities. We use our product, design and technological expertise, as well as our global reach and competitive
manufacturing footprint, to achieve our financial goals and objectives. These include continuing to deliver profitable growth
(balancing risks and returns); investing in innovation to drive business growth and profitability; maintaining a strong balance
sheet with investment grade credit metrics; and consistently returning capital to our stockholders. Further, we have aligned our
strategy with the key trends affecting our business — electrification and shared mobility. At Lear, we are Making every drive
betterTM by providing technology for safer, smarter and more comfortable journeys, while adhering to our values — Be
Inclusive. Be Inventive. Get Results the Right Way.
Our business is organized under two reporting segments: Seating and E-Systems. Each of these segments has a varied product
and technology portfolio across a number of component categories.
Our Seating business consists of the design, development, engineering and manufacture of complete seat systems and key seat
components. Our capabilities in operations and supply chain management enable synchronized assembly and just-in-time
delivery of complex complete seat systems at high volumes to our customers. Included in our complete seat systems and
components are our advanced comfort solutions, including thermal, safety and wellness products, as well as configurable
seating product technologies. All of these products are compatible with traditional internal combustion engine ("ICE")
architectures and electrified powertrains, including the full range of hybrid, plug-in hybrid and battery electric architectures.
Our advanced comfort solutions are facilitated by our seat system, component and integration capabilities, together with our
competencies in electronics, sensors, software and algorithms. As the most vertically integrated global seat supplier, our key
seat component product offerings include seat trim covers; surface materials such as leather and fabric; seat mechanisms; seat
foam; thermal comfort solutions such as seat massage, lumbar, heat and ventilation products; and headrests.
Our E-Systems business consists of the design, development, engineering and manufacture of complete electrical distribution
and connection systems, BDUs and other electronic products. These capabilities enable us to provide our customers with
customizable solutions with optimized designs at competitive costs for both low voltage and high voltage vehicle architectures.
Electrical distribution and connection systems utilize low voltage and high voltage wire, high-speed data cables and flat wiring
to connect networks and electrical signals and manage electrical power within the vehicle for all types of powertrains – from
traditional ICE architectures to the full range of electrified powertrains that require management of higher voltage and power.
Key components of our electrical distribution and connection systems portfolio include wire harnesses, terminals and
connectors, high voltage battery connection systems and engineered components. High voltage battery connection systems
include intercell connect boards, bus bars and main battery connection systems. BDUs control all electrical energy flowing into
and out of high voltage batteries on electrified vehicles. Our other electronic products facilitate signal, data and power
management within the vehicle and include the associated software required to facilitate these functions. Key components of
our other electronic products portfolio include zone control modules, body domain control modules and low voltage and high
voltage power distribution modules. Our software offerings include embedded control, cybersecurity software and software to
control hardware devices. Our customers traditionally have sourced our electronic hardware together with the software that we
embed in it.
We serve all of the world's major automotive manufacturers across both our Seating and E-Systems businesses, and we have
automotive content on more than 450 vehicle nameplates worldwide. It is common for us to have both seating and electrical
and/or electronic content on the same vehicle platform.
Our businesses benefit globally from leveraging common operating standards and disciplines, including world-class product
development and manufacturing processes, as well as common customer support and regional infrastructures, all of which
contribute to our reputation for operational excellence. Our core capabilities are shared across component categories and
include: high-precision manufacturing and assembly with short lead times; complex, global supply chain management; global
engineering and program management; the agility to establish and/or transfer production between facilities quickly; and a
unique, customer-focused culture. In select instances, we are able to manufacture both Seating and E-Systems components in
the same facility. Our businesses also utilize proprietary, industry-specific processes and standards, leverage common low-cost
engineering centers and share centralized operating support functions. These functions include health and safety, logistics,
quality, supply chain management and all major administrative functions such as corporate finance, executive administration,
human resources, information technology and legal.
33
Table of Contents
Industry Overview
Our sales are driven by the number of vehicles produced by the automotive manufacturers, which is ultimately dependent on
consumer demand for automotive vehicles and the availability of raw materials and components, and our content per vehicle.
Due to the evolving global economic conditions since 2020, initially as a result of the COVID-19 pandemic, the automotive
industry experienced a decline in global customer sales and production volumes. Although industry production has recovered
modestly with production increasing 7% in 2022 compared to 2021 and expected to increase 3% in 2023 compared to 2022
(based on January 2023 S&P Global Mobility, formerly IHS Markit, projections), production remains well below recent historic
levels. Global industry production in 2022 was approximately 8% below 2019 pre-pandemic levels and 16% below 2017 peak
levels. Since 2020, industry and economic conditions have been influenced directly and indirectly by macroeconomic events
such as the COVID-19 pandemic and, beginning in the first quarter of 2022, the Russia-Ukraine conflict, resulting in
unfavorable conditions, including shortages of semiconductor chips and other components, elevated inflation levels, higher
interest rates, and labor and energy shortages in certain markets. These factors, among others, are impacting consumer demand
as well as the ability of automotive manufacturers to produce vehicles to meet demand. Our strategy to mitigate these impacts
encompasses our comprehensive cost management process, including value added value engineering (cost technology
optimization), actions to further align our manufacturing capacity to the current industry production environment, investments
in Industry 4.0 technologies to enhance operational efficiencies and utilization of existing capital to reduce future expenditures.
For risks related to the COVID-19 pandemic, including supply shortages, see Item 1A, "Risk Factors."
In March 2022, as our customers began to suspend their Russian operations as a result of Russia's invasion of Ukraine, we
similarly began to suspend our Russian operations. Since the first quarter of 2022, we have suspended all production in Russia
(but for certain de minimis operations) and significantly decreased our workforce in the country. In 2022, we recorded charges
of approximately $19 million related to impairments of substantially all of our operating assets in Russia, including inventory,
property, plant and equipment and right-of-use assets. Although our net sales and total assets in Russia represented less than 1%
of our consolidated net sales and total assets prior to the suspension of operations, the Russia-Ukraine conflict and sanctions
imposed on Russia globally have resulted in economic and supply chain disruptions affecting the overall automotive industry,
the ultimate financial impact of which cannot be reasonably estimated. Further, although we do not have operations in Ukraine,
the Ukrainian operations of certain of our suppliers and suppliers of our customers have been and will likely continue to be
disrupted by the Russia-Ukraine conflict. For further information, see Note 2, "Current Operating Environment," Note 3,
"Summary of Significant Accounting Policies," Note 8, "Leases," and Note 16, "Financial Instruments," to the consolidated
financial statements included in this Report.
Global automotive industry production volumes in 2022, as compared to 2021, are shown below (in thousands of units):
North America
Europe and Africa
Asia
South America
Other
Global light vehicle production
2022 (1)
2021 (1) (2)
% Change
14,307.3
16,089.2
45,637.9
2,716.0
1,767.6
13,047.1
16,290.8
41,840.0
2,507.7
1,565.0
80,518.0
75,250.6
10%
(1%)
9%
8%
13%
7%
(1) Production data based on S&P Global Mobility.
(2) Production data for 2021 has been updated from our 2021 Annual Report on Form 10-K to reflect actual production levels.
In addition to the factors noted above, automotive sales and production can be affected by the age of the vehicle fleet and
related scrappage rates, labor relations issues, fuel prices, regulatory requirements, government initiatives, trade agreements, the
availability and cost of credit, the availability of critical components needed to complete the production of vehicles,
restructuring actions of our customers and suppliers, facility closures, changing consumer attitudes toward vehicle ownership
and usage and other factors. Our operating results are also significantly impacted by the overall commercial success of the
vehicle platforms for which we supply particular products, as well as the level of vertical integration and profitability of the
products that we supply for these platforms. The loss of business with respect to any vehicle model for which we are a
significant supplier, or a decrease in the production levels of any such models, could adversely affect our operating results. In
addition, larger cars and light trucks, as well as vehicle platforms that offer more features and functionality, such as luxury,
sport utility and crossover vehicles, typically have more content and, therefore, tend to have a more significant impact on our
operating results.
34
Table of Contents
Our percentage of consolidated net sales by region in 2022 and 2021 is shown below:
North America
Europe and Africa
Asia
South America
Total
2022
2021
43 %
33 %
20 %
4 %
39 %
35 %
22 %
4 %
100 %
100 %
Our ability to reduce the risks inherent in certain concentrations of our business, and thereby maintain our financial
performance in the future, will depend, in part, on our ability to continue to diversify our sales on a customer, product, platform
and geographic basis to reflect the market overall.
The automotive industry, and our business, continue to be shaped by the broad trends of electrification and, to a lesser extent,
shared mobility. Demand for, and regulatory developments related to, improved energy efficiency, sustainability, and enhanced
safety and communications (e.g., government mandates related to fuel economy, carbon emissions and safety equipment) are
significant drivers of these trends. Electrification, in particular, is likely to be at the forefront of our industry for the foreseeable
future.
Through our products, technology and strategic initiatives, we are well positioned to capture business growth opportunities
resulting from current industry trends. We are focused on profitably growing our businesses and have implemented a strategy
designed to deliver industry-leading, long-term financial returns. This strategy is based upon the following four pillars designed
to capitalize on current industry trends and drive growth and profitability in both of our business segments:
• Extend our market leadership position in Seating with priceable content;
• Transform our E-Systems business through accelerated growth in connection systems, vehicle architecture evolution and
electrification;
• Build on our reputation for operational excellence through investment in Industry 4.0 technologies; and
• Prioritize people and the planet through our Environmental, Social and Governance ("ESG") initiatives.
For further information related to these trends and our strategy, see Part 1 — Item 1, "Business — Industry" and "— Strategy."
Our customers typically require us to reduce our prices over the life of a vehicle model and, at the same time, assume
significant responsibility for the design, development and engineering of our products. Our financial performance is largely
dependent on our ability to offset these price reductions with product cost reductions through product design enhancement,
supply chain management, manufacturing efficiencies and restructuring actions. We also seek to enhance our financial
performance by investing in product development, design capabilities and new product initiatives that respond to and anticipate
the needs of our customers and consumers. We continually evaluate operational and strategic alternatives to improve our
business structure and align our business with the changing needs of our customers and major industry trends affecting our
business.
Our material cost as a percentage of net sales was 66.1% in 2022, as compared to 65.4% in 2021 and 64.3% in 2020, reflecting
increases in certain commodity costs. Raw material, energy, commodity and product component costs can be volatile,
reflecting, among other things, changes in supply and demand, logistics issues, global trade and tariff policies, and geopolitical
issues. Our primary commodity cost exposures relate to steel, copper and leather. We have developed and implemented
strategies to mitigate the impact of such costs through the selective in-sourcing of components, the continued consolidation of
our supply base, longer-term purchase commitments, contractual recovery mechanisms and the selective expansion of low-cost
country sourcing and engineering, as well as value engineering and product benchmarking. Further, our exposure to changes in
steel prices is primarily indirect, through purchased components, and a significant portion of our copper, leather and direct steel
purchases are subject to price index agreements with our customers and suppliers. Certain of these strategies also may limit our
opportunities in a declining price environment. In the current environment of escalating raw material, energy, commodity and
product component costs, these strategies, together with commercial negotiations with our customers and suppliers, typically
offset only a portion of the adverse impact. In addition, the availability of raw materials, energy, commodities and product
components fluctuates from time to time due to factors outside of our control. If these costs increase or availability is restricted,
it could have an adverse impact on our operating results in the foreseeable future. See Part I — Item 1A, "Risk Factors —
Increases in the costs and restrictions on the availability of raw materials, energy, commodities and product components could
adversely affect our financial performance," and "— Forward-Looking Statements" below.
35
Table of Contents
Financial Measures
In evaluating our financial condition and operating performance, we focus primarily on earnings, operating margins, cash flows
and return on invested capital. Our strategy includes expanding our business with new and existing customers globally through
new products, including electrification. We also have selectively increased our vertical integration capabilities globally, as well
as expanded our component manufacturing capacity in Asia, Eastern Europe, Mexico and Northern Africa and our low-cost
engineering capabilities in Asia, Eastern Europe and Northern Africa.
Our success in generating cash flow will depend, in part, on our ability to manage working capital effectively. Working capital
can be significantly impacted by the timing of cash flows from sales and purchases. Historically, we generally have been
successful in aligning our supplier payment terms with our customer payment terms. However, our ability to continue to do so
may be impacted by adverse automotive industry conditions, including inconsistent production schedules due to supply
shortages, changes to our customers' payment terms and the financial condition of our suppliers. In addition, our cash flow is
impacted by our ability to manage our inventory and capital spending effectively. We utilize return on invested capital as a
measure of the efficiency with which our assets generate earnings. Improvements in our return on invested capital will depend
on our ability to maintain an appropriate asset base for our business and to increase productivity and operating efficiency.
Acquisitions
2022
In February 2022, we completed the acquisition of substantially all of Kongsberg Automotive's Interior Comfort Systems
business unit ("Kongsberg ICS"), which specializes in thermal comfort solutions. With almost 50 years of experience in thermal
comfort solutions, Kongsberg ICS has leading technology, a well-balanced customer portfolio built on longstanding
relationships with leading premium automotive manufacturers, and an experienced team. The Kongsberg ICS acquisition is
further advancing our seat component capabilities into specialized thermal comfort solutions such as seat massage, lumbar, heat
and ventilation products that further differentiate our product offerings and improve vehicle performance and packaging —
important features across various vehicle segments. The transaction was valued at approximately $188 million, on a cash and
debt free basis.
For further information, see Note 4, "Acquisition of Kongsberg ICS," to the consolidated financial statements included in this
Report.
In May 2022, we completed the acquisition of Thagora Technology SRL ("Thagora"), a privately held company based in Iasi,
Romania, to access scalable smart-manufacturing technology. Thagora's proprietary solutions complement our sustainable
manufacturing processes by reducing scrap generated by our Seating segment's surface materials operations and lowering
energy usage during production. In addition, Thagora's Industry 4.0 technologies bring significant advances to our
manufacturing operations through engineering and logistics enhancements, including improved material traceability and facility
footprint utilization capabilities. The acquisition is not material to the consolidated financial statements included in this Report.
In May 2022, we entered into a definitive agreement to acquire I.G. Bauerhin ("IGB"), a privately held supplier of automotive
seat heating, ventilation and active cooling, steering wheel heating, seat sensors and electronic control modules, headquartered
in Gruendau, Germany. IGB has more than 4,000 employees at nine manufacturing plants in seven countries. The acquisition of
IGB is expected to further our vertical integration strategy and advance our vision of being a leading provider of innovative
thermal comfort solutions. The transaction is valued at approximately €140 million, on a cash and debt free basis. The
acquisition, subject to regulatory approvals and customary closing conditions and adjustments, is expected to close in 2023.
In November 2022, we completed the acquisition of InTouch Automation ("InTouch"), a privately held supplier of Industry 4.0
technologies and complex automated testing equipment critical in the production of automotive seats. InTouch's product
portfolio is aligned with our Industry 4.0 strategy to implement technologies designed to automate the testing and validation of
seat components and complete seats. The acquisition is not material to the consolidated financial statements included in this
Report.
2021
In March 2021, we completed the acquisition of M&N Plastics, an injection molding specialist and manufacturer of engineered
plastic components for automotive electrical distribution applications. When combined with our continuing organic investments
in electrical distribution and connection systems, the addition of M&N Plastics significantly expands our capabilities and
footprint in engineered components. Engineered components are applicable to all vehicle architectures and are produced using
36
Table of Contents
molding processes. The acquisition is not material to the consolidated financial statements included in this Report.
Operational Restructuring
In 2022, we incurred pretax restructuring costs of $154 million and related manufacturing inefficiency charges of
approximately $5 million, as compared to pretax restructuring costs of $101 million and related manufacturing inefficiency
charges of approximately $12 million in 2021. None of the individual restructuring actions initiated in 2022 were material.
Further, there have been no changes in previously initiated restructuring actions that have resulted (or will result) in a material
change to our restructuring costs.
Our restructuring actions include plant closures and workforce reductions and are initiated to maintain our competitive footprint
or are in response to customer initiatives or changes in global and regional automotive markets. Our restructuring actions are
designed to maintain or improve our operating results and profitability throughout the automotive industry cycles. Restructuring
actions are generally funded within twelve months of initiation and are funded by cash flows from operating activities and
existing cash balances. We expect to incur approximately $23 million of additional restructuring costs related to activities
initiated as of December 31, 2022, all of which are expected to be incurred in the next twelve months. We plan to implement
additional restructuring actions in order to align our manufacturing capacity and other costs with prevailing regional automotive
production levels. Such future restructuring actions are dependent on market conditions, customer actions and other factors.
For further information, see Note 5, "Restructuring," to the consolidated financial statements included in this Report.
Financing Transactions
In December 2022, we entered into an unsecured $150 million committed delayed-draw term loan facility (the "Delayed-Draw
Facility"). The Delayed-Draw Facility is expected to be used to finance the acquisition of IGB upon closing of the transaction
and for general corporate purposes. As of December 31, 2022, there were no amounts drawn under the Delayed-Draw Facility.
For further information, see "— Liquidity and Capital Resources — Capitalization — Delayed-Draw Facility" below and Note
7, "Debt," to the consolidated financial statements included in this Report.
Share Repurchase Program and Quarterly Cash Dividends
We may implement share repurchases through a variety of methods, including, but not limited to, open market purchases,
accelerated stock repurchase programs and structured repurchase transactions. The extent to which we may repurchase our
outstanding common stock and the timing of such repurchases will depend upon our financial condition, results of operations,
capital requirements, prevailing market conditions, alternative uses of capital and other factors (see "— Forward-Looking
Statements" below).
Since the first quarter of 2011, our Board of Directors (the "Board") has authorized $6.1 billion in share repurchases under our
common stock share repurchase program. In 2022, we repurchased $100 million of shares. As of December 31, 2022, we have a
remaining repurchase authorization of $1.2 billion, which expires on December 31, 2024.
In 2022, our Board declared quarterly cash dividends of $0.77 per share of common stock in all quarters. In 2021, our Board
declared quarterly cash dividends of $0.25 per share of common stock in the first and second quarters, a quarterly cash dividend
of $0.50 per share of common stock in the third quarter and a quarterly cash dividend of $0.77 per share of common stock in the
fourth quarter. In 2020, our Board declared a quarterly cash dividend of $0.77 per share of common stock in the first quarter. In
March 2020, as a proactive measure in response to the COVID-19 pandemic, we suspended our quarterly cash dividend. The
quarterly cash dividend was reinstated in the fourth quarter of 2020 at $0.25 per share of common stock.
For further information related to our common stock share repurchase program and our quarterly cash dividends, see Item 5,
"Market for the Company's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities," "—
Liquidity and Capital Resources — Capitalization" below and Note 12, "Capital Stock, Accumulated Other Comprehensive
Loss and Equity," to the consolidated financial statements included in this Report.
Other Matters
In 2022, we recognized tax benefits of $34 million related to restructuring charges and various other items and $2 million
related to the release of tax reserves at several foreign subsidiaries, partially offset by tax expense of $2 million related to the
net increase in valuation allowances on deferred tax assets of foreign subsidiaries.
In 2021, we recognized tax benefits of $39 million related to restructuring charges and various other items, partially offset by
tax expense of $17 million related to the net increase in valuation allowances on deferred tax assets of foreign subsidiaries and
$8 million on a $45 million gain related to a favorable indirect tax ruling in a foreign jurisdiction.
37
Table of Contents
In 2020, we recognized tax benefits of $34 million related to restructuring charges and various other items and $15 million
related to the U.S. deferred tax effect of our foreign branches, partially offset by tax expense of $29 million related to a net
increase in valuation allowances on deferred tax assets.
As discussed above, our results for the years ended December 31, 2022, 2021 and 2020, reflect the following items (in
millions):
For the year ended December 31,
2022
2021
2020
Costs related to restructuring actions, including manufacturing inefficiencies of $5
million in 2022, $12 million in 2021 and $5 million in 2020
$
Acquisition costs
Acquisition-related inventory fair value adjustment
Gain on acquisition-related foreign exchange contracts
Impairments related to Russian operations
Intangible asset impairment
Costs (insurance recoveries) related to typhoon in the Philippines, net
Foreign exchange losses due to foreign exchange rate volatility related to Russia
Favorable indirect tax ruling in a foreign jurisdiction
Loss on extinguishment of debt
Loss related to investments
Tax benefits, net
$
159
10
$
113
—
150
—
1
(2)
19
9
(1)
10
—
—
—
(34)
—
—
—
9
13
—
(45)
25
2
(14)
—
—
—
—
—
—
—
21
4
(20)
For further information regarding these items, see Note 2, "Current Operating Environment," Note 3, "Summary of Significant
Accounting Policies," Note 4, "Acquisition of Kongsberg ICS," Note 5, "Restructuring," Note 6, "Investments in Affiliates and
Other Related Party Transactions," Note 7, "Debt," Note 8, "Leases," and Note 9, "Income Taxes," to the consolidated financial
statements included in this Report. This section includes forward-looking statements that are subject to risks and uncertainties.
For further information regarding these and other factors that have had, or may have in the future, a significant impact on our
business, financial condition or results of operations, see Part I — Item 1A, "Risk Factors," and "— Forward-Looking
Statements" below.
Results of Operations
A summary of our operating results in millions of dollars and as a percentage of net sales is shown below:
For the year ended December 31,
Net sales
Seating
E-Systems
Net sales
Cost of sales
Gross profit
Selling, general and administrative
expenses
Amortization of intangible assets
Interest expense
Other expense, net
Provision for income taxes
2022
2021
2020
$ 15,711.2
75.2 %
$ 14,411.4
74.8 % $ 12,712.7
74.6 %
5,180.3
20,891.5
19,481.6
1,409.9
24.8
100.0
93.3
6.7
4,851.7
19,263.1
17,871.2
1,391.9
25.2
100.0
92.8
7.2
4,332.8
17,045.5
15,936.6
1,108.9
25.4
100.0
93.5
6.5
684.8
70.8
98.6
46.4
133.7
3.3
0.3
0.5
0.2
0.6
643.2
73.3
91.8
0.1
137.7
3.3
0.4
0.5
—
0.7
588.9
65.9
99.6
55.2
93.9
3.5
0.4
0.6
0.3
0.6
Equity in net income of affiliates
(33.1)
(0.2)
(15.8)
(0.1)
(28.5)
(0.2)
Net income attributable to
noncontrolling interests
Net income attributable to Lear
81.0
327.7
$
0.4
1.6 %
87.7
373.9
$
0.5
1.9 % $
75.4
158.5
0.4
0.9 %
38
Table of Contents
Year Ended December 31, 2022, Compared With Year Ended December 31, 2021
Net sales for the year ended December 31, 2022 were $20.9 billion, as compared to $19.3 billion for the year ended
December 31, 2021, an increase of $1.6 billion or 8%. New business globally and higher production volumes on Lear platforms
in North America, Europe and South America favorably impacted net sales by $1.1 billion and $0.8 billion, respectively. Net
sales also benefited by $0.6 billion and $0.2 billion due to commodity recoveries and our Kongsberg ICS acquisition,
respectively. These increases were partially offset by the impact of foreign exchange rate fluctuations, which reduced net sales
by $1.1 billion.
(in millions)
2021
Material cost
Labor and other
Depreciation
2022
Cost of Sales
$
17,871.2
1,210.2
396.2
4.0
$
19,481.6
Cost of sales in 2022 was $19.5 billion, as compared to $17.9 billion in 2021. New business globally and higher production
volumes on Lear platforms in North America, Europe and South America increased cost of sales. Cost of sales also increased as
a result of higher commodity costs and our Kongsberg ICS acquisition. These increases were partially offset by the impact of
foreign exchange fluctuations, which reduced cost of sales.
Gross profit and gross margin were $1.4 billion and 6.7% of net sales in 2022, as compared to $1.4 billion and 7.2% of net sales
in 2021. New business and higher production volumes on Lear platforms positively impacted gross profit by $269 million. The
impact of selling price reductions, increased commodity costs and foreign exchange fluctuations was partially offset by
favorable operating performance, including the benefit of restructuring actions. These factors had a corresponding impact on
gross margin.
Selling, general and administrative expenses, including engineering and development expenses, were $685 million for the year
ended December 31, 2022, as compared to $643 million for the year ended December 31, 2021, primarily reflecting our
Kongsberg ICS acquisition and an increase in engineering costs to support new business. As a percentage of net sales, selling,
general and administrative expenses were 3.3% in 2022, as compared to 3.3% in 2021.
Amortization of intangible assets was $71 million in 2022, as compared to $73 million in 2021. An impairment charge of
$9 million was recognized in 2022 and 2021.
Interest expense was $99 million in 2022, as compared to $92 million in 2021, reflecting financing costs related to our
Kongsberg ICS acquisition in 2022.
Other expense, net, which includes non-income related taxes, foreign exchange gains and losses, gains and losses related to
certain derivative instruments and hedging activities, losses on the extinguishment of debt, gains and losses on the disposal of
fixed assets, the non-service cost components of net periodic benefit cost and other miscellaneous income and expense, was $46
million in 2022, as compared to $— million in 2021. In 2022, we recognized foreign exchange losses of $10 million related to
foreign exchange rate volatility in Russia following the invasion of Ukraine and foreign exchange gains of $2 million related to
foreign exchange contracts on the €140 million IGB purchase price. In 2022, we also recognized a gain of $1 million related to
insurance recoveries. In 2021, we recognized a gain of $45 million related to a favorable indirect tax ruling in a foreign
jurisdiction and losses of $25 million related to the extinguishment of debt and $2 million related to the impairment and
liquidation of an investment.
In 2022, the provision for income taxes was $134 million, representing an effective tax rate of 26.3% on pretax income before
equity in net income of affiliates of $509 million. In 2021, the provision for income taxes was $138 million, representing an
effective tax rate of 23.6% on pretax income before equity in net income of affiliates of $584 million.
In 2022 and 2021, the provision for income taxes was primarily impacted by the level and mix of earnings among tax
jurisdictions. In 2022, we recognized tax benefits of $34 million related to restructuring charges and various other items and $2
million related to the release of tax reserves at several foreign subsidiaries, partially offset by tax expense of $2 million related
to the net increase in valuation allowances on deferred tax assets of foreign subsidiaries. In 2021, we recognized tax benefits of
$39 million related to restructuring charges and various other items, partially offset by tax expense of $17 million related to the
net increase in valuation allowances on deferred tax assets of foreign subsidiaries and $8 million on a $45 million gain related
to a favorable indirect tax ruling in a foreign jurisdiction.
For information related to our valuation allowances, see "— Other Matters — Significant Accounting Policies and Critical
Accounting Estimates — Income Taxes" below.
39
Table of Contents
Equity in net income of affiliates was $33 million for the year ended December 31, 2022, as compared to $16 million for the
year ended December 31, 2021, primarily reflecting the earnings of our Shenyang Jinbei Lear Automotive Seating joint venture
established in the third quarter of 2021.
Net income attributable to Lear was $328 million, or $5.47 per diluted share, in 2022, as compared to $374 million, or $6.19 per
diluted share, in 2021. Net income and diluted net income per share decreased for the reasons described above.
Reportable Operating Segments
We have two reportable operating segments: Seating and E-Systems. For a description of our reportable operating segments,
see "Executive Overview" above.
The financial information presented below is for our two reportable operating segments and our other category for the periods
presented. The other category includes unallocated costs related to corporate headquarters, regional headquarters and the
elimination of intercompany activities, none of which meets the requirements for being classified as an operating segment.
Corporate and regional headquarters costs include various support functions, such as information technology, advanced
research and development, corporate finance, legal, executive administration and human resources. Financial measures
regarding each segment's pretax income before equity in net income of affiliates, interest expense and other expense, net
("segment earnings") and segment earnings divided by net sales ("margin") are not measures of performance under accounting
principles generally accepted in the United States ("GAAP"). Segment earnings and the related margin are used by management
to evaluate the performance of our reportable operating segments. Segment earnings should not be considered in isolation or as
a substitute for net income attributable to Lear, net cash provided by operating activities or other income statement or cash flow
statement data prepared in accordance with GAAP or as measures of profitability or liquidity. In addition, segment earnings, as
we determine it, may not be comparable to related or similarly titled measures reported by other companies.
For a reconciliation of consolidated segment earnings to consolidated income before provision for income taxes and equity in
net income of affiliates, see Note 15, "Segment Reporting," to the consolidated financial statements included in this Report.
Seating —
A summary of financial measures for our Seating segment is shown below (dollar amounts in millions):
For the year ended December 31,
Net sales
Segment earnings (1)
Margin
(1) See definition above.
2022
$ 15,711.2
893.0
2021
$ 14,411.4
851.3
5.7 %
5.9 %
Seating net sales were $15.7 billion for the year ended December 31, 2022, as compared to $14.4 billion for the year ended
December 31, 2021, an increase of $1.3 billion or 9%. New business and higher production volumes on Lear platforms
favorably impacted net sales by $805 million and $540 million, respectively. Net sales also benefited by $319 million and $198
million due to commodity recoveries and our Kongsberg ICS acquisition, respectively. These increases were partially offset by
foreign exchange fluctuations, which reduced net sales by $750 million.
Segment earnings, including restructuring costs, and the related margin on net sales were $893 million and 5.7% in 2022, as
compared to $851 million and 5.9% in 2021. New business and higher production volumes on Lear platforms positively
impacted segment earnings by $204 million. The impact of selling price reductions, higher commodity costs, foreign exchange
fluctuations and impairment charges related to our Russian operations was partially offset by favorable operating performance,
including the benefit of operational restructuring actions.
E-Systems —
A summary of financial measures for our E-Systems segment is shown below (dollar amounts in millions):
For the year ended December 31,
Net sales
Segment earnings (1)
Margin
(1) See definition above.
$
2022
5,180.3
74.4
1.4 %
$
2021
4,851.7
121.2
2.5 %
40
Table of Contents
E-Systems net sales were $5.2 billion for the year ended December 31, 2022, as compared to $4.9 billion for the year ended
December 31, 2021, an increase of $329 million or 7%. New business and higher production volumes on Lear platforms
favorably impacted net sales by $279 million and $200 million, respectively. Net sales also benefited by $274 million due to
commodity recoveries. These increases were partially offset by foreign exchange fluctuations, which reduced net sales by $376
million.
Segment earnings, including restructuring costs, and the related margin on net sales were $74 million and 1.4% in 2022, as
compared to $121 million and 2.5% in 2021. The impact of selling price reductions, higher commodity costs, increased
restructuring costs and foreign exchange fluctuations reduced segment earnings. These decreases were partially offset by
favorable operating performance, including the benefit of operational restructuring actions. New business and higher production
volumes on Lear platforms also positively impacted segment earnings of $65 million.
Other —
A summary of financial measures for our other category, which is not an operating segment, is shown below (dollar amounts in
millions):
For the year ended December 31,
Net sales
Segment earnings (1)
Margin
(1) See definition above.
$
2022
2021
— $
(313.1)
N/A
—
(297.1)
N/A
Segment earnings related to our other category were ($313) million in 2022, as compared to ($297) million in 2021, primarily
reflecting transaction costs of $10 million related to our Kongsberg ICS acquisition.
Year Ended December 31, 2021, Compared With Year Ended December 31, 2020
For a discussion of our results of operations for the year ended December 31, 2021, compared with the year ended
December 31, 2020, refer to our Annual Report on Form 10-K for the year ended December 31, 2021.
Liquidity and Capital Resources
Our primary liquidity needs are to fund general business requirements, including working capital requirements, capital
expenditures, operational restructuring actions and debt service requirements. Our principal sources of liquidity are cash flows
from operating activities, borrowings under available credit facilities and our existing cash balance.
Cash Provided by Subsidiaries
A substantial portion of our operating income is generated by our subsidiaries. As a result, we are dependent on the earnings
and cash flows of and the combination of dividends, royalties, intercompany loan repayments and other distributions and
advances from our subsidiaries to provide the funds necessary to meet our obligations.
As of December 31, 2022 and 2021, cash and cash equivalents of $790 million and $661 million, respectively, were held in
foreign subsidiaries and can be repatriated, primarily through the repayment of intercompany loans and the payment of
dividends. There are no significant restrictions on the ability of our subsidiaries to pay dividends or make other distributions to
Lear.
For further information regarding potential dividends from our non-U.S. subsidiaries, see "— Adequacy of Liquidity Sources"
below and Note 9, "Income Taxes," to the consolidated financial statements included in this Report.
41
Table of Contents
Adequacy of Liquidity Sources
As of December 31, 2022, we had approximately $1.1 billion of cash and cash equivalents on hand, $2.0 billion in available
borrowing capacity under our revolving credit facility and $150 million in available borrowing capacity under our Delayed-
Draw Facility which is expected to be used to finance the acquisition of IGB upon closing of the transaction and for general
corporate purposes. Together with cash provided by operating activities, we believe that this will enable us to meet our liquidity
needs for the foreseeable future and to satisfy ordinary course business obligations. In addition, we expect to continue to pay
quarterly cash dividends and repurchase shares of our common stock pursuant to our authorized common stock share
repurchase program, although such actions are at the discretion of our Board and will depend upon our financial condition,
results of operations, capital requirements, prevailing market conditions, alternative uses of capital and other factors that our
Board may consider at its discretion.
Our future financial results and our ability to continue to meet our liquidity needs are subject to, and will be affected by, cash
flows from operations, as well as restructuring activities, automotive industry conditions, the financial condition of our
customers and suppliers, supply chain disruptions and other related factors. Additionally, an economic downturn or further
reduction in production levels could negatively impact our financial condition.
For further discussion of the risks and uncertainties affecting our cash flows from operations and our overall liquidity, see Part I
— Item 1A, "Risk Factors," and "— Executive Overview" above and "— Forward-Looking Statements" below.
Cash Flows
Year Ended December 31, 2022, Compared with Year Ended December 31, 2021
A summary of net cash provided by operating activities is shown below (in millions):
For the year ended December 31,
2022
2021
Increase
(Decrease) in
Cash Flow
Consolidated net income and depreciation and amortization
$
985 $
1,036 $
(51)
Net change in working capital items:
Accounts receivable
Inventory
Other current assets
Accounts payable
Accrued liabilities
Net change in working capital items
Other
Net cash provided by operating activities
Net cash used in investing activities
Net cash used in financing activities
(519)
(30)
(17)
369
179
(18)
54
161
(213)
(83)
(130)
(86)
(351)
(15)
1,021 $
670 $
(680)
183
66
499
265
333
69
351
(830) $
(647) $
(183)
(387) $
(14) $
(373)
$
$
$
Net cash provided by operating activities was $1,021 million in 2022, as compared to $670 million in 2021. The increase in
operating cash flow was largely driven by a relatively small increase in working capital in 2022 as compared to a larger increase
in working capital in 2021.
Net cash used in investing activities was $830 million in 2022, as compared to $647 million in 2021. In 2022, we paid $188
million for our Kongsberg ICS acquisition and $15 million related to investments in affiliates. In 2021, we paid $50 million
related to investments in affiliates. In 2022, capital spending was $638 million, as compared to $585 million in 2021. Capital
spending is estimated to be approximately $700 million in 2023.
Net cash used in financing activities was $387 million in 2022, as compared to $14 million in 2021. In 2022, we paid $100
million for repurchases of our common stock, $186 million in dividends to Lear stockholders and $85 million in dividends to
noncontrolling interest holders. In 2021, we paid $100 million for repurchases of our common stock, $107 million in dividends
to Lear stockholders and $81 million in dividends to noncontrolling interest holders. In 2021, we received net proceeds of $699
million related to the issuance of 2032 and 2052 Notes and paid $7 million of related issuance costs. Also in 2021, we
42
Table of Contents
repurchased $200 million of our outstanding 2027 Notes for $222 million, including an early tender premium and fees, and
made principal payments under our term loan facility of $220 million.
For further information regarding our 2022 and 2021 financing transactions, see "— Capitalization" below and Note 7, "Debt,"
and Note 12, "Capital Stock, Accumulated Other Comprehensive Loss and Equity," to the consolidated financial statements
included in this Report.
Year Ended December 31, 2021, Compared with Year Ended December 31, 2020
For a discussion of our cash flows for the year ended December 31, 2021, compared with the year ended December 31, 2020,
refer to our Annual Report on Form 10-K for the year ended December 31, 2021.
Capitalization
Short-Term Borrowings
We utilize uncommitted lines of credit as needed for our short-term working capital fluctuations. As of December 31, 2022 and
2021, we had lines of credit from banks totaling $298 million and $96 million, respectively. As of December 31, 2022, we had
short-term debt balances outstanding related to draws on our lines of credit of $10 million. As of December 31, 2021, there
were no short-term debt balances outstanding related to draws on our lines of credit.
The availability of uncommitted lines of credit may be affected by our financial performance, credit ratings and other factors.
Senior Notes
As of December 31, 2022, our senior notes (collectively, the "Notes") consist of the amounts shown below (in millions, except
stated coupon rates):
Senior unsecured notes due 2027 (the "2027 Notes")
$
Note
Senior unsecured notes due 2029 (the "2029 Notes")
Senior unsecured notes due 2030 (the "2030 Notes")
Senior unsecured notes due 2032 (the "2032 Notes")
Senior unsecured notes due 2049 (the "2049 Notes")
Senior unsecured notes due 2052 (the "2052 Notes")
Aggregate
Principal
Amount at
Maturity
Stated Coupon
Rate
550
375
350
350
625
350
3.80%
4.25%
3.50%
2.60%
5.25%
3.55%
$
2,600
The issue, maturity and interest payment dates of the Notes are shown below:
Note
2027 Notes
2029 Notes
2030 Notes
2032 Notes
2049 Notes
2052 Notes
Issuance Date
August 2017
May 2019
February 2020
November 2021
Maturity Date
Interest Payment Dates
September 15, 2027 March 15 and September 15
May 15, 2029
May 30, 2030
January 15, 2032
May 15 and November 15
May 30 and November 30
January 15 and July 15 (1)
May 15 and November 15
January 15 and July 15 (1)
May 2019 and February 2020
May 15, 2049
November 2021
January 15, 2052
(1) Commenced July 15, 2022.
In 2021, we issued $350 million in aggregate principal amount at maturity of 2032 Notes and $350 million in aggregate
principal amount at maturity of 2052 Notes. The 2032 Notes have a stated coupon rate of 2.6% and were issued at 99.782% of
par, resulting in a yield to maturity of 2.624%. The 2052 Notes have a stated coupon rate of 3.55% and were issued at 99.845%
of par, resulting in a yield to maturity of 3.558%.
The net proceeds from the offering of $699 million, after original issue discount, were used, in part, to fund the tender of $200
million in aggregate principal amount of 2027 Notes and the repayment in full of $206 million outstanding on our term loan
facility. The remaining net proceeds were used to finance the 2022 acquisition of Kongsberg ICS and for general corporate
43
Table of Contents
purposes. For further information related to the Kongsberg ICS acquisition, see Note 4, "Acquisition of Kongsberg ICS," to the
consolidated financial statements included in this Report.
In connection with these transactions, we recognized a loss of $24 million on the extinguishment of debt and paid related
issuance costs of $7 million.
In 2020, we issued $350 million in aggregate principal amount at maturity of 2030 Notes and an additional $300 million in
aggregate principal amount at maturity of 2049 Notes. The 2030 Notes have a stated coupon rate of 3.5% and were issued at
99.774% of par, resulting in a yield to maturity of 3.525%. The 2049 Notes have a stated coupon rate of 5.25% and were issued
at 106.626% of par, resulting in a yield to maturity of 4.821%.
The net proceeds from the offering of $669 million, after original issue discount, were used to redeem $650 million in aggregate
principal amount of 2025 Notes at a redemption price equal to 102.625% of the principal amount of such 2025 Notes, plus
accrued interest.
In connection with these transactions, we recognized a loss of $21 million on the extinguishment of debt and paid related
issuance costs of $6 million.
The indentures governing the Notes contain certain restrictive covenants and customary events of default. As of December 31,
2022, we were in compliance with all covenants under the indentures governing the Notes.
For further information related to the Notes, including information on early redemption, covenants and events of default, see
Note 7, "Debt," to the consolidated financial statements included in this Report and the indentures governing the Notes, which
have been incorporated by reference as exhibits to this Report.
Credit Agreement
Our unsecured credit agreement, dated August 8, 2017, consisted of a $1.75 billion revolving credit facility (the "Revolving
Credit Facility") and a $250 million term loan facility (the "Term Loan Facility"). In October 2021, we entered into an amended
and restated credit agreement (the "Credit Agreement") that increased the Revolving Credit Facility to $2.0 billion and extended
the maturity date to October 28, 2026. In November 2021, we repaid in full $206 million outstanding on the Term Loan facility.
In connection with these transactions, we recognized a loss of approximately $1 million on the extinguishment of debt and paid
related issuance costs of approximately $3 million.
In 2022, aggregate borrowings and repayments under the Revolving Credit Facility were $65 million. In 2021, there were no
borrowings or repayments under the Revolving Credit Facility. In March 2020, as a proactive measure in response to the
COVID-19 pandemic, we borrowed $1.0 billion under the Revolving Credit Facility, which was repaid in full in September
2020. As of December 31, 2022 and 2021, there were no borrowings outstanding under the Revolving Credit Facility.
The Credit Agreement contains various financial and other covenants that require us to remain below a maximum leverage
coverage ratio. As of December 31, 2022, we were in compliance with all covenants under the Credit Agreement.
For further information related to the Credit Agreement, including information on pricing, covenants and events of default, see
Note 7, "Debt," to the consolidated financial statements included in this Report and the Credit Agreement, which has been
incorporated by reference as an exhibit to this Report.
Delayed-Draw Term Loan Facility
In December 2022, we entered into an unsecured $150 million committed Delayed-Draw Facility. The Delayed-Draw Facility
is expected to be used to finance the acquisition of IGB upon closing of the transaction and for general corporate purposes. As
of December 31, 2022, there were no amounts drawn under the Delayed-Draw Facility.
For further information related to the Delayed-Draw Facility, see Note 7, "Debt," to the consolidated financial statements
included in this Report
Common Stock Share Repurchase Program
See Item 5, "Market for the Company's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity
Securities."
Dividends
In 2022, our Board declared quarterly cash dividends of $0.77 per share of common stock in all quarters.
44
Table of Contents
In 2021, our Board declared quarterly cash dividends of $0.25 per share of common stock in the first and second quarters, a
quarterly cash dividend of $0.50 per share of common stock in the third quarter and a quarterly cash dividend of $0.77 per share
of common stock in the fourth quarter.
In 2020, our Board declared a quarterly cash dividend of $0.77 per share of common stock in the first quarter. In March 2020,
as a proactive measure in response to the COVID-19 pandemic, we suspended our quarterly cash dividend. The quarterly cash
dividend was reinstated in the fourth quarter of 2020 at $0.25 per share of common stock.
We expect to continue to pay quarterly cash dividends in the future, although such payments are at the discretion of our Board
and will depend upon our financial condition, results of operations, capital requirements, prevailing market conditions,
alternative uses of capital and other factors that our Board may consider at its discretion. See "— Forward-Looking Statements"
below and Note 7, "Debt," to the consolidated financial statements included in this Report.
Commodity Prices
Raw material, energy and commodity costs can be volatile, reflecting, among other things, changes in supply and demand,
logistics issues, global trade and tariff policies, and geopolitical issues. We have commodity price risk with respect to purchases
of certain raw materials, including steel, copper, diesel fuel, chemicals, resins and leather. Our primary commodity cost
exposures relate to steel, copper and leather. We have developed and implemented strategies to mitigate the impact of such
costs through the selective in-sourcing of components, the continued consolidation of our supply base, longer-term purchase
commitments, contractual recovery mechanisms and the selective expansion of low-cost country sourcing and engineering, as
well as value engineering and product benchmarking. Further, the majority of the steel used in our products is comprised of
fabricated components that are integrated into a seat system, such as seat frames, recliner mechanisms, seat tracks and other
mechanical components. Therefore, our exposure to changes in steel prices is primarily indirect, through purchased
components. Additionally, approximately 90% of our copper purchases and a significant portion of our leather and direct steel
purchases are subject to price index agreements with our customers and suppliers. Certain of these strategies also may limit our
opportunities in a declining commodity price environment. In the current environment of escalating raw material, energy and
commodity costs, these strategies, together with commercial negotiations with our customers and suppliers, typically offset only
a portion of the adverse impact. If these costs increase, it could have an adverse impact on our operating results in the
foreseeable future. See Part I — Item 1A, "Risk Factors — Increases in the costs and restrictions on the availability of raw
materials, energy, commodities and product components could adversely affect our financial performance," and "— Forward-
Looking Statements" below.
For further information related to the financial instruments described above, see Note 16, "Financial Instruments," to the
consolidated financial statements included in this Report.
Contractual Obligations and Cash Requirements
Our material cash requirements include the following contractual and other obligations:
Debt obligations and interest expense associated with debt obligations
As of December 31, 2022, we had $2.6 billion of outstanding senior unsecured notes maturing in 2027 through 2052, as well as
$2.0 billion in available borrowing capacity under our Revolving Credit Facility and $150 million in available borrowing
capacity under our Delayed-Draw Facility.
Interest on the Notes is due biannually at varying dates. Scheduled interest payments are shown below (in millions):
Scheduled interest payments $
103 $
103 $
103 $
103 $
103 $
1,107 $
1,622
2023
2024
2025
2026
2027
Thereafter
Total
For further information related to our debt, see "— Capitalization — Senior Notes" and "— Credit Agreement" above and Note
7, "Debt," to the consolidated financial statements included in this Report.
Purchase obligations
We enter into agreements with our customers to produce products at the beginning of a vehicle's life cycle. Although these
agreements do not provide for a specified quantity of products, once entered into, we are generally required to fulfill our
customers' purchasing requirements for the production life of the vehicle. Prior to being formally awarded a program, we
typically work closely with our customers in the early stages of the design and engineering of a vehicle's systems. Failure to
complete the design and engineering work related to a vehicle's systems, or to fulfill a customer agreement, could have a
material adverse impact on our business.
45
Table of Contents
We also enter into agreements with suppliers to assist us in meeting our customers' production needs. These agreements vary as
to duration and quantity commitments. Historically, most have been short-term agreements, which do not provide for minimum
purchases, or are requirements-based agreements.
Leases
The Company has operating leases for production, office and warehouse facilities, manufacturing and office equipment, and
vehicles with future lease obligations ranging from 2023 through 2047. Maturities of operating leases obligations are shown
below (in millions):
Operating lease obligations
$
160 $
140 $
120 $
101 $
83 $
216 $
820
2023
2024
2025
2026
2027
Thereafter
Total
For further information related to our lease obligations, see Note 8, "Leases," to the consolidated financial statements included
in this Report.
Taxes
We may be required to make significant cash outlays related to our unrecognized tax benefits, including interest and penalties.
As of December 31, 2022, we had unrecognized tax benefits, including interest and penalties, of $45 million. However, due to
the uncertainty of the timing of future cash flows associated with our unrecognized tax benefits, we are unable to make
reasonably reliable estimates of the period of cash settlement, if any, with the respective taxing authorities.
For further information related to our unrecognized tax benefits, see Note 9, "Income Taxes," to the consolidated financial
statements included in this Report.
Pension and postretirement obligations
We have minimum funding requirements with respect to certain of our pension benefit obligations. We may elect to make
contributions in excess of the minimum funding requirements in response to investment performance or changes in interest
rates or when we believe that it is financially advantageous to do so and based on our other cash requirements. Our minimum
funding requirements after 2023 will depend on several factors, including investment performance and interest rates. Our
minimum funding requirements may also be affected by changes in applicable legal requirements. Contributions to our defined
benefit pension plans are expected to be approximately $1 million in 2023.
We do not fund our postretirement benefit obligations and certain of our pension benefit obligations. Rather, benefit payments
are made to eligible participants as incurred. We expect benefit payments related to our unfunded pension and postretirement
benefit obligations to be approximately $7 million and $4 million, respectively, in 2023.
For further information related to our pension and other postretirement benefit plans, see "— Other Matters — Pension and
Other Postretirement Benefit Plans" below and Note 10, "Pension and Other Postretirement Benefit Plans," to the consolidated
financial statements included in this Report.
Acquisitions
The purchase price for our acquisition of IGB, when paid, will be funded primarily by proceeds from our Delayed-Draw
Facility.
For further information related to our Delayed-Draw Facility, see Note 7, "Debt," to the consolidated financial statements
included in this Report.
Other Matters
Legal and Environmental Matters
We are involved from time to time in various legal proceedings and claims, including, without limitation, commercial and
contractual disputes, product liability claims, environmental legal claims and other matters. As of December 31, 2022, we had
recorded reserves for pending legal disputes, including commercial disputes, product liability claims and other legal matters, of
$16 million. In addition, as of December 31, 2022, we had recorded reserves for product warranty and recall claims and
environmental matters of $30 million and $8 million, respectively. Although these reserves were determined in accordance with
GAAP, the ultimate outcomes of these matters are inherently uncertain, and actual results may differ significantly from current
estimates. For a description of risks related to various legal proceedings and claims, see Part I — Item 1A, "Risk Factors." For a
46
Table of Contents
more complete description of our outstanding material legal proceedings, see Note 14, "Commitments and Contingencies," to
the consolidated financial statements included in this Report.
Critical Accounting Estimates
Certain of our accounting policies require management to make estimates and assumptions that affect the reported amounts of
assets and liabilities as of the date of the consolidated financial statements and the reported amounts of revenues and expenses
during the reporting period. These estimates and assumptions are based on our historical experience, the terms of existing
contracts, our evaluation of trends in the industry, information provided by our customers and suppliers and information
available from other outside sources, as appropriate. However, these estimates and assumptions are subject to an inherent
degree of uncertainty. Accordingly, actual results in these areas may differ significantly from our estimates.
We consider an accounting estimate to be critical if it requires us to make assumptions about matters that were uncertain at the
time the estimate was made and changes in the estimate would have had a significant impact on our consolidated financial
position or results of operations.
Revenue Recognition and Sales Commitments
We enter into contracts with our customers to provide production parts generally at the beginning of a vehicle's life cycle.
Typically, these contracts do not provide for a specified quantity of products, but once entered into, we are often expected to
fulfill our customers' purchasing requirements for the production life of the vehicle. Many of these contracts may be terminated
by our customers at any time. Historically, terminations of these contracts have been infrequent. We receive purchase orders
from our customers, which provide the commercial terms for a particular production part, including price (but not quantities).
Contracts may also provide for annual price reductions over the production life of the vehicle, and prices may be adjusted on an
ongoing basis to reflect changes in product content/cost and other commercial factors.
Revenue is recognized at a point in time when control of the product is transferred to the customer under standard commercial
terms, as we do not have an enforceable right to payment prior to such transfer. The amount of revenue recognized reflects the
consideration that we expect to be entitled to in exchange for those products based on the current purchase orders, annual price
reductions and ongoing price adjustments. Our customers pay for products received in accordance with payment terms that are
customary within the industry. Our contracts with our customers do not have significant financing components. We record a
contract liability for advances received from our customers.
Amounts billed to customers related to shipping and handling costs are included in net sales in the consolidated statements of
income. Shipping and handling costs are accounted for as fulfillment costs and are included in cost of sales in the consolidated
statements of income.
Taxes assessed by a governmental authority that are both imposed on and concurrent with a specific revenue-producing
transaction that we collect from a customer are excluded from revenue.
Pension and Other Postretirement Benefit Plans
We provide certain pension and other postretirement benefits to our employees and retired employees, including pensions,
postretirement health care benefits and other postretirement benefits.
Approximately 5% of our active workforce is covered by defined benefit pension plans. Pension plans provide benefits based
on plan-specific benefit formulas as defined by the applicable plan documents. Postretirement benefit plans generally provide
for the continuation of medical benefits for eligible retirees. We also have contractual arrangements with certain employees
which provide for supplemental retirement benefits. In general, our policy is to fund our pension benefit obligation based on
legal requirements, tax and liquidity considerations and local practices. We do not fund our postretirement benefit obligation.
Plan assets and obligations are measured using various actuarial assumptions, such as discount rates, rate of compensation
increase, mortality rates, turnover rates and health care cost trend rates, which are determined as of the current year
measurement date. The measurement of net periodic benefit cost is based on various actuarial assumptions, including discount
rates, expected return on plan assets and rate of compensation increase, which are determined as of the prior year measurement
date. We review our actuarial assumptions on an annual basis and modify these assumptions when appropriate. As required by
GAAP, the effects of the modifications are recorded currently or are amortized over future periods.
The determination of the discount rate is generally based on an index created from a hypothetical bond portfolio consisting of
high-quality fixed income securities with durations that match the timing of expected benefit payments. Changes in the selected
discount rate could have a material impact on the projected benefit obligations, unfunded status and related net periodic benefit
cost of our pension and other postretirement benefit plans.
47
Table of Contents
The expected return on plan assets is determined based on several factors, including adjusted historical returns, historical risk
premiums for various asset classes and target asset allocations within the portfolio. Adjustments made to the historical returns
are based on recent return experience in the equity and fixed income markets and the belief that deviations from historical
returns are likely over the relevant investment horizon.
Benefit obligations and net periodic benefit (credit) cost, along with key actuarial assumptions, are shown below (in millions,
except discount rate and expected return on plan assets):
Pension
Other
Postretirement
Benefit obligations as of December 31, 2022
Net periodic benefit (credit) cost for the year ending December 31, 2023 (1)
Discount rate -
Domestic plans
Foreign plans
Expected return on plan assets -
Domestic plans
Foreign plans
$
727
$
3
5.5 %
5.0 %
6.0 %
5.4 %
Net periodic benefit (credit) cost for the year ended December 31, 2022
$
(4)
$
Discount rate -
Domestic plans
Foreign plans
Expected return on plan assets -
Domestic plans
Foreign plans
(1) Forecasted.
3.0 %
2.5 %
5.5 %
4.6 %
47
(1)
5.5 %
5.3 %
N/A
N/A
1
2.8 %
3.1 %
N/A
N/A
The sensitivity to a 100 basis point ("bp") decrease in the discount rate and expected return on plan assets is shown below (in
millions):
100 bp decrease in discount rate
100 bp decrease in expected return on plan assets
Increase in Benefit Obligation
Increase (Decrease) in 2023
Net Periodic Benefit Cost
Pension
Other
Postretirement
Pension
Other
Postretirement
$
85 $
N/A
4 $
N/A
(2) $
7
—
N/A
For further information related to our pension and other postretirement benefit plans, see "— Liquidity and Capital Resources
— Capitalization — Contractual Obligations" above and Note 10, "Pension and Other Postretirement Benefit Plans," to the
consolidated financial statements included in this Report.
Income Taxes
We account for income taxes in accordance with GAAP. Deferred tax assets and liabilities are recognized for the future tax
consequences attributable to temporary differences between financial statement carrying amounts of existing assets and
liabilities and their respective tax bases and tax loss and credit carryforwards. Deferred tax assets and liabilities are measured
using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be
recovered or settled.
Our current and future provision for income taxes is impacted by the initial recognition of and changes in valuation allowances
in certain countries. We intend to maintain these allowances until it is more likely than not that the deferred tax assets will be
realized. Our future provision for income taxes will include no tax benefit with respect to losses incurred and, except for certain
jurisdictions, no tax expense with respect to income generated in these countries until the respective valuation allowances are
eliminated. Accordingly, income taxes are impacted by changes in valuation allowances and the mix of earnings among
jurisdictions. We evaluate the realizability of our deferred tax assets on a quarterly basis. In completing this evaluation, we
consider all available evidence in order to determine whether, based on the weight of the evidence, a valuation allowance for
48
Table of Contents
our deferred tax assets is necessary. Such evidence includes historical results, future reversals of existing taxable temporary
differences and expectations for future taxable income (exclusive of the reversal of temporary differences and carryforwards),
as well as the implementation of feasible and prudent tax planning strategies. If, based on the weight of the evidence, it is more
likely than not that all or a portion of our deferred tax assets will not be realized, a valuation allowance is recorded.
As of December 31, 2022, we had a valuation allowance related to tax loss and credit carryforwards and other deferred tax
assets of $26 million in the United States and $392 million in several international jurisdictions. If operating results improve or
decline on a continual basis in a particular jurisdiction, our decision regarding the need for a valuation allowance could change,
resulting in either the initial recognition or reversal of a valuation allowance in that jurisdiction, which could have a significant
impact on income tax expense in the period recognized and subsequent periods. In determining the provision for income taxes
for financial statement purposes, we make certain estimates and judgments, which affect our evaluation of the carrying value of
our deferred tax assets, as well as our calculation of certain tax liabilities.
The calculation of our gross unrecognized tax benefits and liabilities includes uncertainties in the application of, and changes in,
complex tax regulations in a multitude of jurisdictions across our global operations. We recognize tax benefits and liabilities
based on our estimate of whether, and the extent to which, additional taxes will be due. We adjust these benefits and liabilities
based on changing facts and circumstances; however, due to the complexity of these uncertainties and the impact of tax audits,
the ultimate resolutions may differ significantly from our estimates.
For further information, see "— Forward-Looking Statements" below and Note 9, "Income Taxes," to the consolidated financial
statements included in this Report.
Use of Estimates
The preparation of the consolidated financial statements in conformity with GAAP requires management to make estimates and
assumptions that affect the reported amounts of assets and liabilities as of the date of the consolidated financial statements and
the reported amounts of revenues and expenses during the reporting period. During 2022, there were no material changes in the
methods or policies used to establish estimates and assumptions. Other matters subject to estimation and judgment include
amounts related to accounts receivable realization, inventory obsolescence, asset impairments, useful lives of fixed and
intangible assets, unsettled pricing discussions with customers and suppliers, restructuring accruals, deferred tax asset valuation
allowances and income taxes, pension and other postretirement benefit plan assumptions, accruals related to litigation, warranty
and environmental remediation costs and self-insurance accruals. Actual results may differ significantly from our estimates.
Recently Issued Accounting Pronouncements
For information on the impact of recently issued accounting pronouncements, see Note 17, "Accounting Pronouncements," to
the consolidated financial statements included in this Report.
Forward-Looking Statements
The Private Securities Litigation Reform Act of 1995 provides a safe harbor for forward-looking statements made by us or on
our behalf. The words "will," "may," "designed to," "outlook," "believes," "should," "anticipates," "plans," "expects," "intends,"
"estimates," "forecasts" and similar expressions identify certain of these forward-looking statements. We also may provide
forward-looking statements in oral statements or other written materials released to the public. All such forward-looking
statements contained or incorporated in this Report or in any other public statements which address operating performance,
events or developments that we expect or anticipate may occur in the future, including, without limitation, statements related to
business opportunities, awarded sales contracts, sales backlog and ongoing commercial arrangements, or statements expressing
views about future operating results, are forward-looking statements. Actual results may differ materially from any or all
forward-looking statements made by us. Important factors, risks and uncertainties that may cause actual results to differ
materially from anticipated results include, but are not limited to:
•
•
•
•
•
•
•
general economic conditions in the markets in which we operate, including changes in interest rates or currency exchange
rates;
the impact of the COVID-19 pandemic on our business and the global economy;
changes in actual industry vehicle production levels from our current estimates;
fluctuations in the production of vehicles or the loss of business with respect to, or the lack of commercial success of, a
vehicle model for which we are a significant supplier;
the outcome of customer negotiations and the impact of customer-imposed price reductions;
increases in the costs and restrictions on the availability of raw materials, energy, commodities and product components
and our ability to mitigate such costs and insufficient availability;
disruptions in relationships with our suppliers;
49
Table of Contents
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
the financial condition of and adverse developments affecting our customers and suppliers;
risks associated with conducting business in foreign countries, including the risk of war or other geopolitical conflicts;
currency controls and the ability to economically hedge currencies;
global sovereign fiscal matters and creditworthiness, including potential defaults and the related impacts on economic
activity, including the possible effects on credit markets, currency values, monetary unions, international treaties and
fiscal policies;
competitive conditions impacting us and our key customers and suppliers;
labor disputes involving us or our significant customers or suppliers or that otherwise affect us;
the operational and financial success of our joint ventures;
our ability to attract, develop, engage and retain qualified employees;
our ability to respond to the evolution of the global transportation industry;
the outcome of an increased emphasis on global climate change and other ESG matters by stakeholders;
the impact of global climate change;
the impact and timing of program launch costs and our management of new program launches;
changes in discount rates and the actual return on pension assets;
impairment charges initiated by adverse industry or market developments;
our ability to execute our strategic objectives;
limitations imposed by our existing indebtedness and our ability to access capital markets on commercially reasonable
terms;
disruptions to our information technology systems, or those of our customers or suppliers, including those related to
cybersecurity;
increases in our warranty, product liability or recall costs;
the outcome of legal or regulatory proceedings to which we are or may become a party;
the impact of pending legislation and regulations or changes in existing federal, state, local or foreign laws or regulations;
the impact of regulations on our foreign operations;
costs associated with compliance with environmental laws and regulations;
developments or assertions by or against us relating to intellectual property rights;
the impact of potential changes in tax and trade policies in the United States and related actions by countries in which we
do business; and
other risks, described in Part I — Item 1A, "Risk Factors," as well as the risks and information provided from time to time
in our filings with the Securities and Exchange Commission.
The forward-looking statements in this Report are made as of the date hereof, and we do not assume any obligation to update,
amend or clarify them to reflect events, new information or circumstances occurring after the date hereof.
50
ITEM 7A — QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Market Risk Sensitivity
In the normal course of business, we are exposed to market risks associated with fluctuations in foreign exchange rates, interest
rates and commodity prices. We manage a portion of these risks through the use of derivative financial instruments in
accordance with our policies. We enter into all hedging transactions for periods consistent with the underlying exposures. We
do not enter into derivative instruments for trading purposes.
Foreign Exchange
Operating results may be impacted by our buying, selling and financing in currencies other than the functional currency of our
operating companies ("transactional exposure"). We may mitigate a portion of this risk by entering into forward foreign
exchange, futures and option contracts. The foreign exchange contracts are executed with banks that we believe are
creditworthy. Gains and losses related to foreign exchange contracts are deferred where appropriate and included in the
measurement of the foreign currency transaction subject to the hedge. Gains and losses incurred related to foreign exchange
contracts are generally offset by the direct effects of currency movements on the underlying transactions.
A summary of the notional amount and estimated aggregate fair value of our outstanding foreign exchange contracts is shown
below (in millions):
December 31,
2022
2021
Notional amount (contract maturities < 24 months)
$
2,306 $
1,523
Fair value
63
6
Currently, our most significant foreign currency transactional exposures relate to the Mexican peso, various European
currencies, the Honduran lempira, the Chinese renminbi, the Japanese yen and the Brazilian real. A sensitivity analysis of our
net transactional exposure is shown below (in millions):
Potential Earnings Benefit
(Adverse Earnings Impact)
December 31,
U.S. dollar
Euro
Hypothetical
Strengthening % (1)
2022
2021
10%
10%
$
8 $
19
7
(7)
(1) Relative to all other currencies to which it is exposed for a twelve-month period.
A sensitivity analysis related to the aggregate fair value of our outstanding foreign exchange contracts is shown below (in
millions):
December 31,
U.S. dollar
Euro
Estimated Change in Fair Value
Hypothetical
Change % (2)
10%
10%
2022
2021
$
84 $
70
48
49
(2) Relative to all other currencies to which it is exposed.
There are certain shortcomings inherent in the sensitivity analyses above. The analyses assume that all currencies would
uniformly strengthen or weaken relative to the U.S. dollar or Euro. In reality, some currencies may strengthen while others may
weaken, causing the earnings impact to increase or decrease depending on the currency and the direction of the rate movement.
In addition to the transactional exposure described above, our operating results are impacted by the translation of our foreign
operating income into U.S. dollars ("translational exposure"). In 2022, net sales outside of the United States accounted for 77%
of our consolidated net sales, although certain non-U.S. sales are U.S. dollar denominated. We do not enter into foreign
exchange contracts to mitigate our translational exposure.
51
ITEM 8 – CONSOLIDATED FINANCIAL STATEMENTS AND
SUPPLEMENTARY DATA
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Reports of Ernst & Young LLP, Independent Registered Public Accounting Firm (PCAOB ID: 42) .................................
Consolidated Balance Sheets as of December 31, 2022 and 2021 .........................................................................................
Consolidated Statements of Income for the years ended December 31, 2022, 2021 and 2020 .............................................
Consolidated Statements of Comprehensive Income for the years ended December 31, 2022, 2021 and 2020 ...................
Consolidated Statements of Equity for the years ended December 31, 2022, 2021 and 2020 ..............................................
Consolidated Statements of Cash Flows for the years ended December 31, 2022, 2021 and 2020 ......................................
Notes to Consolidated Financial Statements ..........................................................................................................................
Page
53
56
57
58
59
61
62
Schedule II – Valuation and Qualifying Accounts .................................................................................................................
101
52
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of Lear Corporation
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Lear Corporation and subsidiaries (the Company) as of
December 31, 2022 and 2021, the related consolidated statements of income, comprehensive income, equity and cash flows for
each of the three years in the period ended December 31, 2022, and the related notes and financial statement schedule listed in
the Index at Item 15(a) (collectively referred to as the consolidated financial statements). In our opinion, the consolidated
financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2022 and
2021, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2022, in
conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States)
(PCAOB), the Company's internal control over financial reporting as of December 31, 2022, based on criteria established in
Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission
(2013 framework) and our report dated February 9, 2023, expressed an unqualified opinion thereon.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on
the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are
required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable
rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the
audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to
error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial
statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included
examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included
evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall
presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial
statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or
disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective or
complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated
financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate
opinion on the critical audit matter or on the account or disclosure to which it relates.
Description of the
Matter
Revenue recognition
As discussed in Note 3, Summary of Significant Accounting Policies, the Company's sales contracts with
its customers may provide for annual price reductions over the production life of the vehicle. Prices may
also be adjusted on an ongoing basis to reflect changes in product content, product cost and other
commercial factors. Some of these price adjustments are non-routine in nature. The amount of revenue
recognized by the Company reflects the consideration that the Company expects to be entitled to in
exchange for its products based on the current purchase orders, annual price reductions and ongoing price
adjustments.
Auditing the consideration that the Company expects to be entitled to in exchange for certain of its
products which are subject to non-routine price adjustments is highly judgmental as it relates to
evaluating the sufficiency of evidence available from commercial negotiations to support the ultimate
consideration that the Company is entitled to in exchange for those products.
53
How We
Addressed the
Matter in Our
Audit
We identified and tested controls over the identification and evaluation of product sales with non-routine
price adjustments, including management’s review of the evidence to support the Company’s
measurement of revenue related to those product sales.
Our audit procedures included, among others, inspecting communications between the Company and its
customers related to the pricing arrangements, auditing adjustments at period-end related to those product
sales, performing retrospective reviews of management’s estimates to identify contrary evidence, if any,
and performing inquiries of and obtaining written representations from executives, within the Company,
responsible for the respective customer relationships.
/s/ Ernst & Young LLP
We have served as the Company's auditor since 2002.
Detroit, Michigan
February 9, 2023
54
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of Lear Corporation
Opinion on Internal Control over Financial Reporting
We have audited Lear Corporation and subsidiaries' internal control over financial reporting as of December 31, 2022, based on
criteria established in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the
Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Lear Corporation and subsidiaries (the
Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2022,
based on the COSO criteria.
As indicated in the accompanying Management’s Annual Report on Internal Control over Financial Reporting, management’s
assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal
controls of Kongsberg Automotive's Interior Comfort Systems business unit (“Kongsberg ICS”), which is included in the 2022
consolidated financial statements of the Company and constituted 2.8% of total assets as of December 31, 2022 and 1.2% of
revenues for the year then ended. Our audit of internal control over financial reporting of the Company also did not include an
evaluation of the internal control over financial reporting of Kongsberg ICS.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States)
(PCAOB), the 2022 consolidated financial statements of the Company and our report dated February 9, 2023, expressed an
unqualified opinion thereon.
Basis for Opinion
The Company's management is responsible for maintaining effective internal control over financial reporting and for its
assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Annual
Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company's internal
control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are
required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable
rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the
audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all
material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material
weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and
performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a
reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the
reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally
accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures
that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and
dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit
preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and
expenditures of the company are being made only in accordance with authorizations of management and directors of the
company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or
disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also,
projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate
because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Ernst & Young LLP
Detroit, Michigan
February 9, 2023
55
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In millions, except share data)
December 31,
Assets
Current Assets:
Cash and cash equivalents
Accounts receivable
Inventories
Other
Total current assets
Long-Term Assets:
Property, plant and equipment, net
Goodwill
Other
Total long-term assets
Total assets
Liabilities and Equity
Current Liabilities:
Short-term borrowings
Accounts payable and drafts
Accrued liabilities
Current portion of long-term debt
Total current liabilities
Long-Term Liabilities:
Long-term debt
Other
Total long-term liabilities
Equity:
Preferred stock, 100,000,000 shares authorized (including 10,896,250 shares
of Series A convertible preferred stock authorized); no shares outstanding
Common stock, $0.01 par value, 300,000,000 shares authorized; 64,571,405 shares
issued as of December 31, 2022 and 2021
Additional paid-in capital
Common stock held in treasury, 5,493,211 and 4,945,847 shares
as of December 31, 2022 and 2021, respectively, at cost
Retained earnings
Accumulated other comprehensive loss
Lear Corporation stockholders' equity
Noncontrolling interests
Equity
Total liabilities and equity
The accompanying notes are an integral part of these consolidated balance sheets.
56
2022
2021
$
1,114.9 $
3,451.9
1,573.6
853.7
6,994.1
2,854.0
1,660.6
2,254.3
6,768.9
1,318.3
3,041.5
1,571.9
833.5
6,765.2
2,720.1
1,657.9
2,209.2
6,587.2
$
13,763.0 $
13,352.4
$
9.9 $
3,206.1
1,961.5
10.8
5,188.3
2,591.2
1,153.2
3,744.4
—
2,952.4
1,806.7
0.8
4,759.9
2,595.2
1,188.9
3,784.1
—
—
0.6
1,023.1
(753.9)
5,214.1
(805.1)
4,678.8
151.5
4,830.3
0.6
1,019.4
(679.2)
5,072.8
(770.2)
4,643.4
165.0
4,808.4
$
13,763.0 $
13,352.4
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF INCOME
(In millions, except share and per share data)
For the year ended December 31,
Net sales
Cost of sales
Selling, general and administrative expenses
Amortization of intangible assets
Interest expense
Other expense, net
Consolidated income before provision for income taxes and equity in
net income of affiliates
Provision for income taxes
Equity in net income of affiliates
Consolidated net income
Less: Net income attributable to noncontrolling interests
Net income attributable to Lear
Basic net income per share attributable to Lear
Diluted net income per share attributable to Lear
$
$
$
2022
20,891.5 $
2021
19,263.1 $
$
19,481.6
684.8
17,871.2
643.2
70.8
98.6
46.4
509.3
133.7
73.3
91.8
0.1
583.5
137.7
(33.1)
(15.8)
408.7
81.0
461.6
87.7
327.7 $
373.9 $
2020
17,045.5
15,936.6
588.9
65.9
99.6
55.2
299.3
93.9
(28.5)
233.9
75.4
158.5
5.49 $
6.22 $
2.63
5.47 $
6.19 $
2.62
Average common shares outstanding
59,674,488
60,082,833
60,254,380
Average diluted shares outstanding
59,920,529
60,420,484
60,429,962
The accompanying notes are an integral part of these consolidated financial statements.
57
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In millions)
For the year ended December 31,
Consolidated net income
Other comprehensive income (loss), net of tax:
Defined benefit plan adjustments
Derivative instruments and hedging activities
Foreign currency translation adjustments
Total other comprehensive income (loss)
Consolidated comprehensive income
Less: Comprehensive income attributable to noncontrolling interests
2022
2021
2020
$
408.7 $
461.6 $
233.9
103.7
52.0
(198.1)
(42.4)
366.3
73.5
77.5
(31.2)
(108.3)
(62.0)
399.6
90.8
(59.3)
2.8
139.7
83.2
317.1
91.0
226.1
Comprehensive income attributable to Lear
$
292.8 $
308.8 $
The accompanying notes are an integral part of these consolidated financial statements.
58
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EQUITY
(In millions, except share data)
Redeemable
Non-
controlling
Interests
Balance as of December 31, 2019
Comprehensive income (loss):
Net income (loss)
Other comprehensive income (loss)
Total comprehensive income (loss)
Adoption of ASU 2016-13
Stock-based compensation
Net issuances of 249,064 shares held in treasury in
settlement of stock-based compensation
Repurchases of 641,149 shares of common stock at an
average price of $109.22 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Acquisition of outstanding noncontrolling interests
Redeemable noncontrolling interest adjustment
Balance as of December 31, 2020
Comprehensive income (loss):
Net income
Other comprehensive income (loss)
Total comprehensive income (loss)
Stock-based compensation
Net issuances of 163,761 shares held in treasury in
settlement of stock-based compensation
Repurchases of 589,717 shares of common stock at an
average price of $170.03 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Affiliate transaction
Balance as of December 31, 2021
Comprehensive income (loss):
Net income
Other comprehensive income (loss)
Total comprehensive income (loss)
$
$
$
Stock-based compensation
Net issuances of 215,945 shares held in treasury in
settlement of stock-based compensation
Repurchases of 763,309 shares of common stock at an
average price of $131.37 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Change in noncontrolling interests
Balance as of December 31, 2022
$
118.4
—
(3.5)
7.7
4.2
—
—
—
—
—
(26.8)
(96.9)
1.1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Common
Stock
Additional
Paid-in
Capital
Common
Stock Held
in Treasury
Retained
Earnings
$
0.6 $
969.1 $
(563.1) $ 4,715.8
—
—
—
—
—
—
—
—
—
—
40.0
—
—
—
—
—
158.5
—
158.5
(0.8)
—
(46.9)
34.5
(3.5)
—
—
—
—
—
0.6 $
—
—
—
1.4
—
963.6 $
(70.0)
—
—
—
—
—
(62.1)
—
—
(1.1)
(598.6) $ 4,806.8
—
—
—
—
—
—
—
—
60.3
—
—
—
—
373.9
—
373.9
—
(33.1)
19.7
—
—
—
—
—
0.6 $ 1,019.4 $
—
—
—
28.6
(100.3)
—
—
—
—
(107.9)
—
—
(679.2) $ 5,072.8
—
—
—
—
—
—
—
—
52.0
—
—
—
—
327.7
—
327.7
—
(48.3)
25.6
(0.2)
—
—
—
—
0.6 $ 1,023.1 $
—
—
—
—
(100.3)
—
—
—
—
(186.2)
—
—
(753.9) $ 5,214.1
$
$
$
The accompanying notes are an integral part of these consolidated financial statements.
59
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EQUITY (continued)
(In millions, except share data)
Balance as of December 31, 2019
Comprehensive income (loss):
Net income (loss)
Other comprehensive income (loss)
Total comprehensive income (loss)
Adoption of ASU 2016-13
Stock-based compensation
Net issuances of 249,064 shares held in treasury in
settlement of stock-based compensation
Repurchases of 641,149 shares of common stock at an
average price of $109.22 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Acquisition of outstanding noncontrolling interests
Redeemable noncontrolling interest adjustment
Balance as of December 31, 2020
Comprehensive income (loss):
Net income
Other comprehensive income (loss)
Total comprehensive income (loss)
Stock-based compensation
Net issuances of 163,761 shares held in treasury in
settlement of stock-based compensation
Repurchases of 589,717 shares of common stock at an
average price of $170.03 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Affiliate transaction
Balance as of December 31, 2021
Comprehensive income (loss):
Net income
Other comprehensive income (loss)
Total comprehensive income (loss)
Stock-based compensation
Net issuances of 215,945 shares held in treasury in
settlement of stock-based compensation
Repurchases of 763,309 shares of common stock at an
average price of $131.37 per share
Dividends declared to Lear Corporation stockholders
Dividends declared to noncontrolling interests
Change in noncontrolling interests
Balance as of December 31, 2022
$
Accumulated Other Comprehensive Loss, net of tax
Derivative
Instruments and
Hedge
Activities
Cumulative
Translation
Adjustments
Defined
Benefit Plans
$
(217.6) $
Lear
Corporation
Stockholders'
Equity
Non-
controlling
Interests
Equity
9.8 $
(564.9) $ 4,349.7 $ 151.4 $ 4,501.1
—
(59.3)
(59.3)
—
—
—
—
2.8
2.8
—
—
—
—
124.1
124.1
—
—
158.5
67.6
226.1
(0.8)
40.0
78.9
7.9
86.8
—
—
237.4
75.5
312.9
(0.8)
40.0
—
(15.9)
—
(15.9)
—
—
—
—
—
(276.9) $
$
—
—
—
—
—
12.6 $
—
—
—
—
—
(70.0)
(62.1)
(90.6)
1.4
(1.1)
(440.8) $ 4,467.3 $ 147.6 $ 4,614.9
(70.0)
(62.1)
—
1.4
(1.1)
—
—
(90.6)
—
—
—
77.5
77.5
—
—
—
(31.2)
(31.2)
—
—
(111.4)
(111.4)
—
373.9
(65.1)
308.8
60.3
87.7
3.1
90.8
—
461.6
(62.0)
399.6
60.3
—
—
(13.4)
—
(13.4)
—
—
—
—
(199.4) $
$
—
103.7
103.7
—
—
—
—
—
—
(95.7) $
—
—
—
—
(18.6) $
—
52.0
52.0
—
—
—
—
—
—
33.4 $
—
—
—
—
(100.3)
(107.9)
(81.0)
36.2
(552.2) $ 4,643.4 $ 165.0 $ 4,808.4
(100.3)
(107.9)
—
28.6
—
—
(81.0)
7.6
—
(190.6)
(190.6)
—
327.7
(34.9)
292.8
52.0
81.0
(7.5)
73.5
—
408.7
(42.4)
366.3
52.0
—
(22.9)
—
(22.9)
—
—
—
—
(100.3)
(186.2)
(87.6)
0.6
(742.8) $ 4,678.8 $ 151.5 $ 4,830.3
(100.3)
(186.2)
—
—
—
—
(87.6)
0.6
The accompanying notes are an integral part of these consolidated financial statements.
60
LEAR CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In millions)
For the year ended December 31,
Cash Flows from Operating Activities:
Consolidated net income
Adjustments to reconcile consolidated net income to net cash provided by
operating activities –
2022
2021
2020
$
408.7 $
461.6 $
233.9
Equity in net income of affiliates
Loss on extinguishment of debt
Impairment charges
Deferred tax benefit
Depreciation and amortization
Stock-based compensation
Net change in recoverable customer engineering, development and tooling
Net change in working capital items (see below)
Changes in other long-term assets
Changes in other long-term liabilities
Other, net
Net cash provided by operating activities
Cash Flows from Investing Activities:
Additions to property, plant and equipment
Acquisition of Kongsberg ICS, net of cash acquired
Other, net
Net cash used in investing activities
Cash Flows from Financing Activities:
Short-term borrowings (repayments), net
Repurchase of common stock
Dividends paid to Lear Corporation stockholders
Dividends paid to noncontrolling interests
Term loan repayments
Proceeds from the issuance of senior notes
Redemption of senior notes
Payment of debt issuance and other financing costs
Revolving credit facility borrowings
Revolving credit facility repayments
Other, net
Net cash used in financing activities
Effect of foreign currency translation
Net Change in Cash, Cash Equivalents and Restricted Cash
Cash, Cash Equivalents and Restricted Cash as of Beginning of Period
Cash, Cash Equivalents and Restricted Cash as of End of Period
Changes in Working Capital Items:
Accounts receivable
Inventories
Accounts payable
Accrued liabilities and other
Net change in working capital items
Supplementary Disclosure:
Cash paid for interest
Cash paid for income taxes, net of refunds received of $17.1 million in 2022,
$40.7 million in 2021 and $32.5 million in 2020
$
$
$
$
$
(33.1)
—
29.1
(49.4)
576.5
52.0
(1.2)
(17.8)
9.6
8.2
38.8
1,021.4
(638.2)
(188.3)
(3.8)
(830.3)
8.0
(100.3)
(185.5)
(84.6)
—
—
—
—
—
—
(24.9)
(387.3)
(7.7)
(203.9)
1,321.3
1,117.4 $
(518.8) $
(29.8)
368.6
162.2
(17.8) $
(15.8)
24.6
20.1
(55.5)
573.9
60.3
(29.1)
(351.0)
(35.7)
(6.5)
23.2
670.1
(585.1)
—
(61.6)
(646.7)
—
(100.3)
(106.7)
(81.1)
(220.3)
698.7
(221.5)
(9.9)
—
—
27.5
(13.6)
(3.0)
6.8
1,314.5
1,321.3 $
160.9 $
(213.4)
(129.6)
(168.9)
(351.0) $
(28.5)
21.1
31.9
(84.7)
539.9
40.0
(47.0)
(66.9)
(26.5)
8.3
41.6
663.1
(452.3)
—
(16.5)
(468.8)
(19.3)
(70.0)
(67.3)
(123.3)
(14.1)
669.1
(667.1)
(7.0)
1,000.0
(1,000.0)
(112.7)
(411.7)
21.5
(195.9)
1,510.4
1,314.5
(164.7)
(107.7)
214.0
(8.5)
(66.9)
96.5 $
91.6 $
117.8
194.6 $
148.3 $
141.5
The accompanying notes are an integral part of these consolidated financial statements.
61
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements
(1) Basis of Presentation
Lear Corporation ("Lear," and together with its consolidated subsidiaries, the "Company") and its affiliates design and
manufacture automotive seating and electrical distribution systems and related components. The Company's main customers are
automotive original equipment manufacturers. The Company operates facilities worldwide.
The accompanying consolidated financial statements include the accounts of Lear, a Delaware corporation, and the wholly
owned and less than wholly owned subsidiaries controlled by Lear.
(2) Current Operating Environment
Due to the evolving global economic conditions since 2020, initially as a result of the COVID-19 pandemic, the automotive
industry experienced a decline in global customer sales and production volumes. Although industry production has recovered
modestly, production remains well below recent historic levels. Since 2020, industry and economic conditions have been
influenced directly and indirectly by macroeconomic events such as the COVID-19 pandemic and, beginning in the first quarter
of 2022, the Russia-Ukraine conflict, resulting in unfavorable conditions, including shortages of semiconductor chips and other
components, elevated inflation levels, higher interest rates, and labor and energy shortages in certain markets. These factors,
among others, are impacting consumer demand as well as the ability of automotive manufacturers to produce vehicles to meet
demand. The Company's strategy to mitigate these impacts encompasses a comprehensive cost management process, including
value added value engineering (or cost technology optimization), actions to further align the Company's manufacturing capacity
to the current industry production environment, investments in Industry 4.0 technologies to enhance operational efficiencies and
utilization of existing capital to reduce future expenditures.
In March 2022, as the Company's customers began to suspend their Russian operations as a result of Russia's invasion of
Ukraine, the Company similarly began to suspend its Russian operations. Since the first quarter of 2022, the Company has
suspended all production in Russia (but for certain de minimis operations) and significantly decreased its workforce in the
country. In September 2022, the Company identified potential impairment indicators, given the continued uncertainty regarding
its Russian operations and the military escalation announced by the Russian government in September 2022, and determined
that the values of substantially all of its operating assets in Russia were impaired. As a result, the Company recorded charges of
$19.4 million in 2022 related to impairments of inventory, property, plant and equipment and right-of-use assets. These charges
are reflected in the Company's Seating business and are included in cost of sales in the accompanying consolidated statement of
income for the year ended December 31, 2022. Although the Company's net sales and total assets in Russia represented less
than 1% of its consolidated net sales and total assets prior to the suspension of operations, the Russia-Ukraine conflict and
sanctions imposed on Russia globally have resulted in economic and supply chain disruptions affecting the overall automotive
industry, the ultimate financial impact of which cannot be reasonably estimated. Further, although the Company does not have
operations in Ukraine, the Ukrainian operations of certain of the Company's suppliers and suppliers of its customers have been
and will likely continue to be disrupted by the Russia-Ukraine conflict.
The accompanying consolidated financial statements reflect estimates and assumptions made by management as of
December 31, 2022, and for the year then ended. Such estimates and assumptions affect, among other things, the Company's
goodwill; long-lived asset valuations; inventory valuations; valuations of deferred income taxes and income tax contingencies;
and credit losses related to the Company's financial instruments. Events and circumstances arising after December 31, 2022,
including those resulting from the impact of the COVID-19 pandemic and the Russia-Ukraine conflict, will be reflected in
management's estimates and assumptions in future periods.
For more information related to goodwill, long-lived assets, inventory and credit losses, see Note 3, "Summary of Significant
Accounting Policies." For more information related to income taxes, see Note 3, "Summary of Significant Accounting Policies
— Income Taxes," and Note 9, "Income Taxes." For more information related to leases, see Note 8, "Leases."
(3) Summary of Significant Accounting Policies
Consolidation
Lear consolidates all entities, including variable interest entities, in which it has a controlling financial interest. Investments in
affiliates in which Lear does not have control, but does have the ability to exercise significant influence over operating and
financial policies, are accounted for under the equity method (Note 6, "Investments in Affiliates and Other Related Party
Transactions").
62
Table of Contents
Fiscal Period Reporting
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company's annual financial results are reported on a calendar year basis, and quarterly interim results are reported using a
thirteen week reporting calendar.
Cash, Cash Equivalents and Restricted Cash
Cash and cash equivalents include all highly liquid investments with original maturities of ninety days or less. Restricted cash
includes cash that is legally restricted as to use or withdrawal.
Accounts Receivable
The Company records accounts receivable as title is transferred to its customers. The Company's customers are the world's
major automotive manufacturers. Generally, the Company does not require collateral for its accounts receivable.
The Company's allowance for credit losses on financial assets measured at amortized cost, primarily accounts receivable,
reflects management's estimate of credit losses over the remaining expected life of such assets, measured primarily using
historical experience, as well as current conditions and forecasts that affect the collectability of the reported amount. Expected
credit losses for newly recognized financial assets, as well as changes to expected credit losses during the period, are recognized
in earnings. The Company also considers geographic and segment specific risk factors in the development of expected credit
losses. As of December 31, 2022 and 2021, accounts receivable are reflected net of reserves of $35.3 million and $35.5 million,
respectively. Changes in expected credit losses were not significant during the year ended December 31, 2022.
The Company receives bank notes from its customers, which are classified as other current assets in the consolidated balance
sheets, for certain amounts of accounts receivable, primarily in Asia. The Company may hold such bank notes until maturity,
exchange them with suppliers to settle liabilities or sell them to third-party financial institutions in exchange for cash.
Inventories
Inventories are stated at the lower of cost or net realizable value. Cost is determined using the first-in, first-out method. Finished
goods and work-in-process inventories include material, labor and manufacturing overhead costs. The Company records
reserves for inventory in excess of production and/or forecasted requirements and for obsolete inventory in production and
service inventories. A summary of inventories is shown below (in millions):
December 31,
Raw materials
Work-in-process
Finished goods
Reserves
Inventories
2022
2021
1,216.8 $
126.6
391.9
(161.7)
1,573.6 $
1,171.0
119.9
453.4
(172.4)
1,571.9
$
$
Engineering and Development ("E&D") and Tooling Costs
In 2022, the Company incurred E&D costs of $568.3 million, including $321.9 million (or 2% of related sales) in its Seating
segment, $240.4 million (or 5% of related sales) in its E-Systems segment and $6.0 million at its headquarters location.
Pre-Production Costs Related to Long-Term Supply Agreements
The Company incurs pre-production E&D and tooling costs related to the products produced for its customers under long-term
supply agreements. The Company expenses all pre-production E&D costs for which reimbursement is not contractually
guaranteed by the customer. In addition, the Company expenses all pre-production tooling costs related to customer-owned
tools for which reimbursement is not contractually guaranteed by the customer or for which the Company does not have a non-
cancelable right to use the tooling.
During 2022 and 2021, the Company capitalized $249.5 million and $298.3 million, respectively, of pre-production E&D costs
for which reimbursement is contractually guaranteed by the customer. During 2022 and 2021, the Company also capitalized
$185.3 million and $164.4 million, respectively, of pre-production tooling costs related to customer-owned tools for which
reimbursement is contractually guaranteed by the customer or for which the Company has a non-cancelable right to use the
tooling. These amounts are included in other current and long-term assets in the accompanying consolidated balance sheets as
of December 31, 2022 and 2021. During 2022 and 2021, the Company collected $435.8 million and $448.0 million,
respectively, of cash related to E&D and tooling costs.
63
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The classification of recoverable customer E&D and tooling costs related to long-term supply agreements is shown below (in
millions):
December 31,
Current
Long-term
Recoverable customer E&D and tooling
Other E&D Costs
2022
2021
$
$
175.7 $
161.3
337.0 $
207.4
143.5
350.9
Costs incurred in connection with product launches, to the extent not recoverable from the Company's customers, are recorded
in cost of sales as incurred and totaled $145.2 million, $139.5 million and $135.0 million for the years ended December 31,
2022, 2021 and 2020, respectively.
All other E&D costs are recorded in selling, general and administrative expenses as incurred and totaled $173.6 million, $170.7
million and $192.3 million for the years ended December 31, 2022, 2021 and 2020, respectively.
Property, Plant and Equipment
Property, plant and equipment is stated at cost. Costs associated with the repair and maintenance of the Company's property,
plant and equipment are expensed as incurred. Costs associated with improvements which extend the life, increase the capacity
or improve the efficiency or safety of the Company's property, plant and equipment are capitalized and depreciated over the
remaining useful life of the related asset. Depreciable property is depreciated over the estimated useful lives of the assets, using
principally the straight-line method as follows:
Buildings and improvements
Machinery and equipment
10 to 40 years
5 to 10 years
A summary of property, plant and equipment is shown below (in millions):
December 31,
Land
Buildings and improvements
Machinery and equipment
Construction in progress
Total property, plant and equipment
Less – accumulated depreciation
Net property, plant and equipment
2022
2021
$
$
104.6 $
868.6
4,871.5
378.0
6,222.7
(3,368.7)
2,854.0 $
108.7
850.3
4,497.7
345.6
5,802.3
(3,082.2)
2,720.1
For the years ended December 31, 2022, 2021 and 2020, depreciation expense was $505.7 million, $500.6 million and $474.0
million, respectively. As of December 31, 2022, 2021 and 2020, capital expenditures recorded in accounts payable totaled
$150.2 million, $147.8 million and $118.4 million, respectively.
As of December 31, 2021, property held for sale of $2.6 million and $17.5 million in the Company's Seating and E-Systems
segments, respectively, was recorded in other current assets in the accompanying consolidated balance sheet.
Impairment of Goodwill
Goodwill is not amortized but is tested for impairment on at least an annual basis. Impairment testing is required more often
than annually if an event or circumstance indicates that an impairment is more likely than not to have occurred. In conducting
its annual impairment testing, the Company may first perform a qualitative assessment of whether it is more likely than not that
a reporting unit's fair value is less than its carrying amount. If not, no further goodwill impairment testing is required. If it is
more likely than not that a reporting unit's fair value is less than its carrying amount, or if the Company elects not to perform a
qualitative assessment of a reporting unit, the Company then compares the fair value of the reporting unit to the related net book
value. If the net book value of a reporting unit exceeds its fair value, an impairment loss is measured and recognized.
The Company utilizes an income approach to estimate the fair value of each of its reporting units and a market valuation
approach to further support this analysis. The income approach is based on projected debt-free cash flow which is discounted to
64
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
the present value using discount factors that consider the timing and risk of cash flows. The Company believes that this
approach is appropriate because it provides a fair value estimate based upon the reporting unit's expected long-term operating
cash flow performance. This approach also mitigates the impact of cyclical trends that occur in the industry. Fair value is
estimated using recent automotive industry and specific platform production volume projections, which are based on both third-
party and internally developed forecasts, as well as commercial and discount rate assumptions. The discount rate used is the
value-weighted average of the Company's estimated cost of equity and of debt ("cost of capital") derived using both known and
estimated customary market metrics. The Company's weighted average cost of capital is adjusted by reporting unit to reflect a
risk factor, if necessary. Other significant assumptions include terminal value growth rates, terminal value margin rates, future
capital expenditures and changes in future working capital requirements. While there are inherent uncertainties related to the
assumptions used and to management's application of these assumptions to this analysis, the Company believes that the income
approach provides a reasonable estimate of the fair value of its reporting units. The market valuation approach is used to further
support the Company's analysis and is based on recent transactions involving comparable companies.
The annual goodwill impairment assessment is completed as of the first day of the Company's fourth quarter. The Company
performed a qualitative assessment for each reporting unit, except for two reporting units within the E-Systems operating
segment where the Company elected to perform quantitative analyses. The qualitative assessments indicated that it was more
likely than not that the fair value of each reporting unit exceeded its respective carrying value. The quantitative analyses for the
remaining two reporting units indicated that the fair value of each reporting unit exceeded its respective carrying value. As of
December 31, 2022, the goodwill of these two reporting units represents approximately 7% and less than 1% of the Company's
total goodwill.
A summary of the changes in the carrying amount of goodwill for each of the periods in the two years ended December 31,
2022, is shown below (in millions):
Balance as of December 31, 2020
Foreign currency translation and other
Balance as of December 31, 2021
Acquisition
Foreign currency translation and other
Balance as of December 31, 2022
Intangible Assets
Seating
E-Systems
$
$
1,268.8 $
(19.5)
1,249.3
27.9
(16.1)
1,261.1 $
387.0 $
21.6
408.6
—
(9.1)
399.5 $
Total
1,655.8
2.1
1,657.9
27.9
(25.2)
1,660.6
As of December 31, 2022, intangible assets consist primarily of certain intangible assets recorded in connection with the
acquisitions of Guilford Mills in 2012, the parent company of Eagle Ottawa, LLC in 2015, AccuMED Holdings Corp. in 2016,
Grupo Antolin's automotive seating business in 2017, Xevo Inc. ("Xevo") in 2019 and substantially all of Kongsberg
Automotive's Interior Comfort Systems business unit ("Kongsberg ICS") in 2022 (Note 4, "Acquisition of Kongsberg ICS").
These intangible assets were recorded at their estimated fair value, based on independent appraisals, as of the transaction or
acquisition date. The value assigned to technology intangibles is based on the royalty savings method, which applies a
hypothetical royalty rate to projected revenues attributable to the identified technologies. Royalty rates were determined based
primarily on analysis of market information. The customer-based intangible asset includes the acquired entity's established
relationships with its customers and the ability of these customers to generate future economic profits for the Company. The
value assigned to customer-based intangibles is based on the present value of future earnings attributable to the asset group after
recognition of required returns to other contributory assets.
A summary of intangible assets as of December 31, 2022, is shown below (in millions):
Gross Carrying
Value
Accumulated
Amortization
Net Carrying
Value
Weighted
Average Useful
Life (years)
Amortized intangible assets:
Customer-based
Licensing agreements
Technology
Other
Balance as of December 31, 2022
514.9 $
71.0
16.2
0.4
602.5 $
(313.3) $
(52.0)
(1.7)
(0.1)
(367.1) $
201.6
19.0
14.5
0.3
235.4
11.7
5.0
13.3
5.0
11.0
$
$
65
Table of Contents
A summary of intangible assets as of December 31, 2021, is shown below (in millions):
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Amortized intangible assets:
Customer-based
Licensing agreements
Technology
Other
Unamortized intangible assets:
In-process research and development
Balance as of December 31, 2021
Gross Carrying
Value
Accumulated
Amortization
Net Carrying
Value
Weighted
Average Useful
Life (years)
$
$
534.4 $
70.9
21.8
0.4
627.5
(277.6) $
(37.8)
(18.4)
(0.1)
(333.9)
8.9
636.4 $
—
(333.9) $
256.8
33.1
3.4
0.3
293.6
8.9
302.5
11.7
5.0
8.5
5.0
10.8
In 2022 and 2021, intangible assets with a gross carrying value of $19.4 million and $7.5 million, respectively, became fully
amortized and are no longer included in the gross carrying value or accumulated amortization.
Excluding the impact of any future acquisitions, the Company's estimated annual amortization expense for the five succeeding
years is shown below (in millions):
Year
2023
2024
2025
2026
2027
$
Expense
60.6
47.9
21.1
20.7
20.3
Impairment of Long-Lived Assets
The Company monitors its long-lived assets for impairment indicators on an ongoing basis in accordance with accounting
principles generally accepted in the United States ("GAAP"). If impairment indicators exist, the Company performs the
required impairment analysis by comparing the undiscounted cash flows expected to be generated from the long-lived assets to
the related net book values. If the net book value exceeds the undiscounted cash flows, an impairment loss is measured and
recognized. An impairment loss is measured as the difference between the net book value and the fair value of the long-lived
assets. Fair value estimates of property, plant and equipment and right-of-use assets are based on independent appraisals or
discounted cash flows, giving consideration to the highest and best use of the assets. Key assumptions used in the appraisals are
based on a combination of market and cost approaches, as appropriate.
For the years ended December 31, 2022, 2021 and 2020, the Company recognized fixed asset impairment charges of $9.9
million, $4.2 million and $21.3 million, respectively, in conjunction with its restructuring actions (Note 5, "Restructuring"). For
the years ended December 31, 2022, 2021 and 2020, the Company recognized additional asset impairment charges of $5.7
million, $7.7 million and $4.6 million, respectively. For the year ended December 31, 2022, additional asset impairment
charges include $4.4 million related to the Company's Russian operations (Note 2, "Current Operating Environment"). Asset
impairment charges are recorded in cost of sales in the accompanying consolidated statements of income for the years ended
December 31, 2022, 2021 and 2020.
In 2022 and 2021, the Company recognized impairment charges of $8.9 million and $8.5 million, respectively, related to certain
indefinite-lived and definite-lived intangible assets of its E-Systems segment resulting from a change in the intended use of the
assets. The impairment charges are included in amortization of intangible assets in the accompanying consolidated statements
of income for the years ended December 31, 2022 and 2021.
Impairment of Investments in Affiliates
The Company monitors its investments in affiliates for indicators of other-than-temporary declines in value on an ongoing basis
in accordance with GAAP. If the Company determines that an other-than-temporary decline in value has occurred, it recognizes
an impairment loss, which is measured as the difference between the recorded book value and the fair value of the investment.
Fair value is generally determined using an income approach based on discounted cash flows or negotiated transaction values.
66
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
For the years ended December 31, 2021 and 2020, the Company recognized impairment charges of $1.0 million and $4.0
million, respectively, related to its investments in affiliates.
Accrued Liabilities
A summary of accrued liabilities as of December 31, 2022 and 2021, is shown below (in millions):
December 31,
Compensation and employee benefits
Income and other taxes payable
Current portion of lease obligations
Other
Accrued liabilities
Leases
2022
2021
$
404.3 $
353.8
300.3
136.8
1,120.1
290.7
125.6
1,036.6
$ 1,961.5 $ 1,806.7
The Company determines if an arrangement contains a lease at inception. For all asset classes, the Company utilizes the short-
term lease exemption as provided under GAAP. A short-term lease is a lease that, at the commencement date, has a term of
twelve months or less and does not include an option to purchase the underlying asset. For all asset classes, the Company
accounts for each lease component of a contract and its associated non-lease components as a single lease component, rather
than allocating a standalone value to each component of a lease.
For purposes of calculating operating lease obligations under the standard, the Company's lease terms may include options to
extend or terminate the lease when it is reasonably certain that the Company will exercise such option. The Company's leases
do not contain material residual value guarantees or material restrictive covenants.
Operating lease expense is recognized on a straight-line basis over the lease terms.
The discount rate used to measure a lease obligation should be the rate implicit in the lease; however, the Company's operating
leases generally do not provide an implicit rate. Accordingly, the Company uses its incremental borrowing rate at lease
commencement to determine the present value of lease payments. The incremental borrowing rate is an entity-specific rate
which represents the rate of interest a lessee would pay to borrow on a collateralized basis over a similar term with similar
payments.
Revenue Recognition and Sales Commitments
The Company enters into contracts with its customers to provide production parts generally at the beginning of a vehicle's life
cycle. Typically, these contracts do not provide for a specified quantity of products, but once entered into, the Company is often
expected to fulfill its customers' purchasing requirements for the production life of the vehicle. Many of these contracts may be
terminated by the Company's customers at any time. Historically, terminations of these contracts have been infrequent. The
Company receives purchase orders from its customers, which provide the commercial terms for a particular production part,
including price (but not quantities). Contracts may also provide for annual price reductions over the production life of the
vehicle, and prices may be adjusted on an ongoing basis to reflect changes in product content/cost and other commercial factors.
Revenue is recognized at a point in time when control of the product is transferred to the customer under standard commercial
terms, as the Company does not have an enforceable right to payment prior to such transfer. The amount of revenue recognized
reflects the consideration that the Company expects to be entitled to in exchange for those products based on the current
purchase orders, annual price reductions and ongoing price adjustments. Revenue recognized related to prior years represented
approximately 1% of consolidated net sales during the years ended December 31, 2022, 2021 and 2020. The Company's
customers pay for products received in accordance with payment terms that are customary within the industry. The Company's
contracts with its customers do not have significant financing components.
The Company records a contract liability for advances received from its customers. As of December 31, 2022 and 2021, there
were no significant contract liabilities recorded. Further, there were no significant contract liabilities recognized in revenue
during the years ended December 31, 2022, 2021 and 2020.
Amounts billed to customers related to shipping and handling costs are included in net sales in the consolidated statements of
income. Shipping and handling costs are accounted for as fulfillment costs and are included in cost of sales in the consolidated
statements of income.
67
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Taxes assessed by a governmental authority that are both imposed on and concurrent with a specific revenue-producing
transaction that are collected by the Company from a customer are excluded from revenue.
Cost of Sales and Selling, General and Administrative Expenses
Cost of sales includes material, labor and overhead costs associated with the manufacture and distribution of the Company's
products. Distribution costs include inbound freight costs, purchasing and receiving costs, inspection costs, warehousing costs
and other costs of the Company's distribution network. Selling, general and administrative expenses include selling, engineering
and development and administrative costs not directly associated with the manufacture and distribution of the Company's
products.
Restructuring Costs
Restructuring costs include employee termination benefits, asset impairment charges and contract termination costs, as well as
other incremental costs resulting from the restructuring actions. Employee termination benefits are recorded based on existing
union and employee contracts, statutory requirements, completed negotiations and Company policy. Other incremental costs
principally include equipment and personnel relocation costs. In addition to restructuring costs, the Company also incurs
incremental manufacturing inefficiency costs at the operating locations impacted by the restructuring actions during the related
restructuring implementation period. Restructuring costs are recognized in the Company's consolidated financial statements in
accordance with GAAP. Generally, charges are recorded as restructuring actions are approved, communicated and/or
implemented.
Other Expense, Net
Other expense, net includes non-income related taxes, foreign exchange gains and losses, gains and losses related to certain
derivative instruments and hedging activities, losses on the extinguishment of debt, gains and losses on the disposal of fixed
assets, gains and losses on the consolidation and deconsolidation of affiliates, the non-service cost components of net periodic
benefit cost and other miscellaneous income and expense. A summary of other expense, net is shown below (in millions):
For the year ended December 31,
Other expense
Other income
Other expense, net
Income Taxes
2022
2021
2020
$
$
57.2 $
(10.8)
46.4 $
65.4 $
(65.3)
0.1 $
72.2
(17.0)
55.2
Deferred tax assets and liabilities are recognized for the future tax consequences attributable to temporary differences between
financial statement carrying amounts of existing assets and liabilities and their respective tax bases and tax loss and credit
carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in
the years in which those temporary differences are expected to be recovered or settled.
The Company's current and future provision for income taxes is impacted by the initial recognition of and changes in valuation
allowances in certain countries. The Company intends to maintain these allowances until it is more likely than not that the
deferred tax assets will be realized. The Company's future provision for income taxes will include no tax benefit with respect to
losses incurred and, except for certain jurisdictions, no tax expense with respect to income generated in these countries until the
respective valuation allowances are eliminated. Accordingly, income taxes are impacted by changes in valuation allowances
and the mix of earnings among jurisdictions. The Company evaluates the realizability of its deferred tax assets on a quarterly
basis. In completing this evaluation, the Company considers all available evidence in order to determine whether, based on the
weight of the evidence, a valuation allowance for its deferred tax assets is necessary. Such evidence includes historical results,
future reversals of existing taxable temporary differences and expectations for future taxable income (exclusive of the reversal
of temporary differences and carryforwards), as well as the implementation of feasible and prudent tax planning strategies. If,
based on the weight of the evidence, it is more likely than not that all or a portion of the Company's deferred tax assets will not
be realized, a valuation allowance is recorded. If operating results improve or decline on a continual basis in a particular
jurisdiction, the Company's decision regarding the need for a valuation allowance could change, resulting in either the initial
recognition or reversal of a valuation allowance in that jurisdiction, which could have a significant impact on income tax
expense in the period recognized and subsequent periods. In determining the provision for income taxes for financial statement
purposes, the Company makes certain estimates and judgments, which affect its evaluation of the carrying value of its deferred
tax assets, as well as its calculation of certain tax liabilities.
68
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company reclassifies taxes from accumulated other comprehensive loss to earnings as the items to which the tax effects
relate are similarly reclassified.
The calculation of the Company's gross unrecognized tax benefits and liabilities includes uncertainties in the application of, and
changes in, complex tax regulations in a multitude of jurisdictions across its global operations. The Company recognizes tax
benefits and liabilities based on its estimates of whether, and the extent to which, additional taxes will be due. The Company
adjusts these benefits and liabilities based on changing facts and circumstances; however, due to the complexity of these
uncertainties and the impact of tax audits, the ultimate resolutions may differ significantly from the Company's estimates.
Foreign Currency
Assets and liabilities of foreign subsidiaries that use a functional currency other than the U.S. dollar are translated into U.S.
dollars at the foreign exchange rates in effect at the end of the period. Revenues and expenses of foreign subsidiaries are
translated into U.S. dollars using an average of the foreign exchange rates in effect during the period. Translation adjustments
that arise from translating a foreign subsidiary's financial statements from the functional currency to the U.S. dollar are reflected
in accumulated other comprehensive loss in the consolidated balance sheets.
Transaction gains and losses that arise from foreign exchange rate fluctuations on transactions denominated in a currency other
than the functional currency, except certain long-term intercompany transactions, are included in the consolidated statements of
income as incurred. For the year ended December 31, 2022, other expense, net includes net foreign currency transaction losses
of $30.4 million, including $9.6 million related to foreign exchange rate volatility following Russia's invasion of Ukraine. For
the years ended December 31, 2021 and 2020, other expense, net includes net foreign currency transaction losses of $24.8
million and $19.9 million, respectively.
Stock-Based Compensation
The Company measures stock-based employee compensation expense at fair value in accordance with GAAP and recognizes
such expense over the vesting period of the stock-based employee awards.
Net Income Per Share Attributable to Lear
Basic net income per share attributable to Lear is computed by dividing net income attributable to Lear by the average number
of common shares outstanding during the period. Common shares issuable upon the satisfaction of certain conditions pursuant
to a contractual agreement are considered common shares outstanding and are included in the computation of basic net income
per share attributable to Lear.
Diluted net income per share attributable to Lear is computed using the treasury stock method by dividing net income
attributable to Lear by the average number of common shares outstanding, including the dilutive effect of common stock
equivalents using the average share price during the period.
A summary of information used to compute basic and diluted net income per share attributable to Lear is shown below (in
millions, except share and per share data):
For the year ended December 31,
Net income attributable to Lear
2022
2021
2020
$
327.7 $
373.9 $
158.5
Average common shares outstanding
Dilutive effect of common stock equivalents
Average diluted shares outstanding
Basic net income per share attributable to Lear
Diluted net income per share attributable to Lear
Product Warranty
59,674,488
246,041
59,920,529
60,082,833
337,651
60,420,484
60,254,380
175,582
60,429,962
$
$
5.49 $
6.22 $
2.63
5.47 $
6.19 $
2.62
Losses from warranty obligations are accrued when it is probable that a liability has been incurred and the related amounts are
reasonably estimable.
69
Table of Contents
Segment Reporting
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company is organized under two reportable operating segments: Seating, which consists of the design, development,
engineering and manufacture of complete seat systems and key seat components, and E-Systems, which consists of the design,
development, engineering and manufacture of complete electrical distribution and connection systems, battery disconnect units
and other electronic products. Key components of the Company's complete seat systems and components are advanced comfort
solutions, including thermal, safety and wellness products, as well as configurable seating product technologies. All of these
products are compatible with traditional internal combustion engine ("ICE") architectures and electrified powertrains, including
the full range of hybrid, plug-in hybrid and battery electric architectures. Key seat component product offerings include seat
trim covers; surface materials such as leather and fabric; seat mechanisms; seat foam; thermal comfort solutions such as seat
massage, lumbar, heat and ventilation products; and headrests. Key components of the Company's electrical distribution and
connection systems portfolio include wire harnesses, terminals and connectors, high voltage battery connection systems and
engineered components for both ICE architectures and electrified powertrains that require management of higher voltage and
power. High voltage battery connection systems include intercell connect boards, bus bars and main battery connection
systems. Key components of the other electronic products portfolio include zone control modules, body domain control
modules and low voltage and high voltage power distribution modules. The Company's software offerings include embedded
control, cybersecurity software and software to control hardware devices. The Company's customers traditionally have sourced
its electronic hardware together with the software that the Company embeds in it. The other category includes unallocated costs
related to corporate headquarters, regional headquarters and the elimination of intercompany activities, none of which meets the
requirements for being classified as an operating segment. Corporate and regional headquarters costs include various support
functions, such as information technology, advanced research and development, corporate finance, legal, executive
administration and human resources.
Each of the Company's operating segments reports its results from operations and makes its requests for capital expenditures
directly to the chief operating decision maker. The economic performance of each operating segment is driven primarily by
automotive production volumes in the geographic regions in which it operates, as well as by the success of the vehicle
platforms for which it supplies products. Also, each operating segment operates in the competitive Tier 1 automotive supplier
environment and is continually working with its customers to manage costs and improve quality. The Company's production
processes generally make use of hourly labor, dedicated facilities, sequential manufacturing and assembly processes and
commodity raw materials.
The Company evaluates the performance of its operating segments based primarily on (i) revenues from external customers,
(ii) pretax income before equity in net income of affiliates, interest expense and other expense, net ("segment earnings") and
(iii) cash flows, being defined as segment earnings less capital expenditures plus depreciation and amortization.
The accounting policies of the Company's operating segments are the same as those described in this note to the consolidated
financial statements.
Derivative Instruments and Hedge Activities
The Company has used derivative financial instruments, including forwards, futures, options, swaps and other derivative
contracts, to reduce the effects of fluctuations in foreign exchange rates and interest rates and the resulting variability of the
Company's operating results. The Company is not a party to leveraged derivatives. The Company's derivative financial
instruments are subject to master netting arrangements that provide for the net settlement of contracts, by counterparty, in the
event of default or termination. On the date that a derivative contract for a hedge instrument is entered into, the Company
designates the derivative as either (1) a hedge of the exposure to changes in the fair value of a recognized asset or liability or of
an unrecognized firm commitment (a fair value hedge), (2) a hedge of the exposure of a forecasted transaction or of the
variability in the cash flows of a recognized asset or liability (a cash flow hedge), (3) a hedge of a net investment in a foreign
operation (a net investment hedge) or (4) a contract not designated as a hedge instrument.
For a fair value hedge, the change in the fair value of the derivative is recorded in earnings and reflected in the consolidated
statements of income on the same line as the gain or loss on the hedged item attributable to the hedged risk. For a cash flow
hedge, the change in the fair value of the derivative is recorded in accumulated other comprehensive loss in the consolidated
balance sheets. When the underlying hedged transaction is realized, the gain or loss included in accumulated other
comprehensive loss is recorded in earnings and reflected in the consolidated statements of income on the same line as the gain
or loss on the hedged item attributable to the hedged risk. For a net investment hedge, the change in the fair value of the
derivative is recorded in cumulative translation adjustment, which is a component of accumulated other comprehensive loss in
the consolidated balance sheets. When the related currency translation adjustment is required to be reclassified, usually upon the
sale or liquidation of the investment, the gain or loss included in accumulated other comprehensive loss is recorded in earnings
and reflected in other expense, net in the consolidated statements of income. Changes in the fair value of contracts not
70
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
designated as hedge instruments are recorded in earnings and reflected in other expense, net in the consolidated statements of
income. Cash flows attributable to derivatives used to manage foreign currency risks are classified on the same line as the
hedged item attributable to the hedged risk in the consolidated statements of cash flows. Upon settlement, cash flows
attributable to derivatives designated as net investment hedges are classified as investing activities in the consolidated
statements of cash flows. Cash flows attributable to forward starting interest rate swaps are classified as financing activities in
the consolidated statements of cash flows.
The Company formally documents its hedge relationships, including the identification of the hedge instruments and the related
hedged items, as well as its risk management objectives and strategies for undertaking the hedge transaction. Derivatives are
recorded at fair value in other current and long-term assets and other current and long-term liabilities in the consolidated
balance sheets. The Company also formally assesses whether a derivative used in a hedge transaction is highly effective in
offsetting changes in either the fair value or the cash flows of the hedged item. When it is determined that a hedged transaction
is no longer probable to occur, the Company discontinues hedge accounting.
Use of Estimates
The preparation of the consolidated financial statements in conformity with GAAP requires management to make estimates and
assumptions that affect the reported amounts of assets and liabilities as of the date of the consolidated financial statements and
the reported amounts of revenues and expenses during the reporting period. During 2022, there were no material changes in the
methods or policies used to establish estimates and assumptions. Other matters subject to estimation and judgment include
amounts related to accounts receivable realization, inventory obsolescence, asset impairments, useful lives of fixed and
intangible assets and unsettled pricing negotiations with customers and suppliers (Note 3, "Summary of Significant Accounting
Policies"); acquisitions (Note 4, "Acquisition of Kongsberg ICS"); restructuring accruals (Note 5, "Restructuring"); deferred tax
asset valuation allowances and income taxes (Note 9, "Income Taxes"); pension and other postretirement benefit plan
assumptions (Note 10, "Pension and Other Postretirement Benefit Plans"); accruals related to litigation, warranty and
environmental remediation costs (Note 14, "Commitments and Contingencies"); and self-insurance accruals. Actual results may
differ significantly from the Company's estimates.
(4) Acquisition of Kongsberg ICS
On February 28, 2022, the Company completed the acquisition of Kongsberg ICS. Kongsberg ICS specializes in thermal
comfort solutions, including seat massage, lumbar, heat and ventilation products, with annual sales of approximately $300
million, of which approximately 20% are intercompany.
The acquisition of Kongsberg ICS was accounted for as a business combination, and accordingly, the assets acquired and
liabilities assumed are included in the accompanying consolidated balance sheet as of December 31, 2022. The operating results
and cash flows of Kongsberg ICS are included in the accompanying consolidated financial statements from the date of
acquisition in the Company's Seating segment.
The final purchase price and related allocation are shown below (in millions):
Purchase price, net of acquired cash
Property, plant and equipment
Other assets purchased and liabilities assumed, net
Goodwill
Intangible assets
Purchase price allocation
December 31,
2022
$
188.3
124.1
25.2
27.9
11.1
$
188.3
Goodwill recognized is primarily attributable to the assembled workforce and expected synergies related to future growth.
Intangible assets consist of amounts recognized for the fair value of developed technology based on an independent appraisal. It
is currently estimated that the developed technology will have a weighted average useful life of approximately seventeen years.
The Company incurred transaction costs of $10.0 million, which have been expensed as incurred and are recorded in selling,
general and administrative expenses in the accompanying consolidated statement of income for the year ended December 31,
2022.
71
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The pro-forma effects of this acquisition do not materially impact the Company's reported results for any period presented.
For further information related to acquired assets measured at fair value, see Note 16, "Financial Instruments."
(5) Restructuring
Charges recorded in connection with the Company's restructuring actions are shown below (in millions):
For the year ended December 31,
Employee termination benefits
Asset impairments -
Property, plant and equipment
Right-of-use assets
Contract termination costs
Other related costs
2022
2021
2020
$
121.9 $
85.1 $
104.2
9.9
6.5
4.5
11.4
4.2
7.2
0.3
4.1
21.3
2.0
14.9
2.5
$
154.2 $
100.9 $
144.9
In 2020, contract termination costs include pension benefit plan settlement losses of $12.9 million. See Note 10, "Pension and
Other Postretirement Benefit Plans."
Restructuring charges by income statement account are shown below (in millions):
For the year ended December 31,
Cost of sales
Selling, general and administrative expenses
Other (income) expense, net
Restructuring charges by operating segment are shown below (in millions):
For the year ended December 31,
Seating
E-Systems
Other
2022
2021
2020
129.7 $
24.5
—
75.6 $
32.0
(6.7)
154.2 $
100.9 $
122.3
16.4
6.2
144.9
2022
2021
2020
65.3 $
45.7 $
82.8
6.1
47.7
7.5
73.7
56.7
14.5
154.2 $
100.9 $
144.9
$
$
$
$
The Company expects to incur approximately $16 million and approximately $7 million of additional restructuring costs in its
Seating and E-Systems segments, respectively, related to activities initiated as of December 31, 2022, and expects that the
components of such costs will be consistent with its historical experience.
A summary of the changes in the Company's restructuring reserves is shown below (in millions):
Balance as of January 1,
Provision for employee termination benefits
Payments, utilizations and foreign currency
Balance as of December 31,
2022
2021
$
$
129.4 $
121.9
(168.4)
82.9 $
139.0
85.1
(94.7)
129.4
72
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
(6) Investments in Affiliates and Other Related Party Transactions
The Company's beneficial ownership in affiliates accounted for under the equity method is shown below:
December 31,
Beijing BHAP Lear Automotive Systems Co., Ltd. (China)
Guangzhou Lear Automotive Components Co., Ltd. (China)
Jiangxi Jiangling Lear Interior Systems Co., Ltd. (China)
Lear Dongfeng Automotive Seating Co., Ltd. (China)
Beijing Lear Hyundai Transys Co., Ltd. (China)
Changchun Lear FAWSN Automotive Seat Systems Co., Ltd. (China)
Honduras Electrical Distribution Systems S. de R.L. de C.V. (Honduras)
Kyungshin-Lear Sales and Engineering LLC
Shenyang Jinbei Lear Automotive Seating Co. Ltd. (China)
Shenzen Shinry Lear Electric Control Technology Co., Ltd. (China)
Hyundai Transys Lear Automotive Private Limited (India)
Techstars Corporate Partner 2017 LLC
RevoLaze, LLC
Maniv Mobility II A, L.P.
Trucks Venture Fund 2, L.P.
Autotech Fund II, L.P.
2022
50%
50
50
50
50
49
49
49
49
49
35
34
20
7
7
3
2021
50%
50
50
50
40
49
49
49
49
—
35
34
20
7
5
4
2020
50%
50
50
50
40
49
49
49
—
—
35
34
20
9
3
4
Summarized group financial information for affiliates accounted for under the equity method as of December 31, 2022 and
2021, and for the years ended December 31, 2022, 2021 and 2020, is shown below (unaudited; in millions):
December 31,
Balance sheet data:
Current assets
Non-current assets
Current liabilities
Non-current liabilities
For the year ended December 31,
Income statement data:
Net sales
Gross profit
Income before provision for income taxes
Net income attributable to affiliates
2022
2021
$
1,335.9 $
235.0
1,009.2
8.4
1,217.5
239.5
921.7
6.7
2022
2021
2020
$
2,447.6 $
106.1
102.8
64.4
1,833.6 $
50.1
104.5
80.5
1,597.5
83.0
73.8
44.8
A summary of amounts recorded in the Company's consolidated balance sheets related to its affiliates is shown below (in
millions):
December 31,
Aggregate investment in affiliates
Receivables due from affiliates (including notes and advances)
Payables due to affiliates
$
2022
2021
196.7 $
182.5
0.7
184.7
143.0
0.7
73
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
A summary of transactions with affiliates accounted for under the equity method and other related parties is shown below (in
millions):
For the year ended December 31,
Sales to affiliates
Purchases from affiliates
Management and other fees for services provided to affiliates
Dividends received from affiliates
$
2022
2021
2020
783.0 $
9.0
32.6
21.1
676.6 $
4.4
38.5
26.8
656.4
1.9
28.3
24.6
The Company has certain investments with beneficial ownership interests of less than 20% that are accounted for under the
equity method as the Company's beneficial ownership interests in these entities are similar to partnership interests.
2021
In 2021, the Company acquired a 49% interest in Shenyang Jinbei Lear Automotive Seating Co. Ltd. ("Shenyang Jinbei") for
$41.3 million. The investment is accounted for under the equity method as the Company does not control Shenyang Jinbei but
does have the ability to exercise significant influence over certain operating and financial policies of Shenyang Jinbei. The
acquisition cost is classified within cash flows used in investing activities in the accompanying consolidated statement of cash
flows for the year ended December 31, 2021.
For further information related to acquired assets measured at fair value, see Note 16, "Financial Instruments."
(7) Debt
Short-Term Borrowings
The Company utilizes uncommitted lines of credit as needed for its short-term working capital fluctuations. As of December 31,
2022 and 2021, the Company had lines of credit from banks totaling $298.2 million and $96.2 million, respectively. As of
December 31, 2022, the Company had short-term debt balances outstanding related to draws on its lines of credit of $9.9
million. As of December 31, 2021, the Company had no short-term debt balances outstanding related to draws on its lines of
credit.
Long-Term Debt
A summary of long-term debt, net of unamortized debt issuance costs and unamortized original issue premium (discount) and
the related weighted average interest rates is shown below (in millions):
December 31,
Debt Instrument
3.8% Senior Notes due 2027 (the "2027 Notes")
4.25% Senior Notes due 2029 (the "2029 Notes")
3.5% Senior Notes due 2030 (the "2030 Notes")
2.6% Senior Notes due 2032 (the "2032 Notes")
5.25% Senior Notes due 2049 (the "2049 Notes")
3.55% Senior Notes due 2052 (the "2052 Notes")
Other
Less — Current portion
Long-term debt
Long-Term
Debt
Unamortized
Debt
Issuance
Costs
2022
Unamortized
Original
Issue
Premium
(Discount)
Long-Term
Debt, Net
Weighted
Average
Interest
Rate
(1.8) $
(0.7)
(0.6)
(0.7)
13.2
(0.5)
—
8.9
546.1 3.885%
372.3 4.288%
347.4 3.525%
346.5 2.624%
632.2 5.103%
345.7 3.558%
11.8
2,602.0
(10.8)
$ 2,591.2
N/A
$
550.0 $
375.0
350.0
350.0
625.0
350.0
11.8
$ 2,611.8 $
(2.1) $
(2.0)
(2.0)
(2.8)
(6.0)
(3.8)
—
(18.7) $
74
Table of Contents
December 31,
Debt Instrument
2027 Notes
2029 Notes
2030 Notes
2032 Notes
2049 Notes
2052 Notes
Other
Less — Current portion
Long-term debt
Senior Notes
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Long-Term
Debt
Unamortized
Debt
Issuance
Costs
2021
Unamortized
Original
Issue
Premium
(Discount)
550.0
375.0
350.0
350.0
625.0
350.0
7.5
$ 2,607.5 $
(2.5)
(2.3)
(2.3)
(3.1)
(6.1)
(3.8)
—
(20.1) $
(2.2)
(0.9)
(0.7)
(0.8)
13.7
(0.5)
—
8.6
Long-Term
Debt, Net
Weighted
Average
Interest
Rate
545.3 3.885%
371.8 4.288%
347.0 3.525%
346.1 2.624%
632.6 5.103%
345.7 3.558%
N/A
7.5
2,596.0
(0.8)
$ 2,595.2
The issuance, maturity and interest payment dates of the Company's senior unsecured 2027 Notes, 2029 Notes, 2030 Notes,
2032 Notes, 2049 Notes and 2052 Notes (collectively, the "Notes") are shown below:
Note
2027 Notes
2029 Notes
2030 Notes
2032 Notes
2049 Notes
2052 Notes
Issuance Date
August 2017
May 2019
February 2020
November 2021
May 2019 and February 2020
November 2021
Maturity Date
Interest Payment Dates
September 15, 2027 March 15 and September 15
May 15, 2029
May 30, 2030
January 15, 2032
May 15, 2049
January 15, 2052
May 15 and November 15
May 30 and November 30
January 15 and July 15 (1)
May 15 and November 15
January 15 and July 15 (1)
(1) Commenced July 15, 2022.
2027 Notes Issued in 2017
In 2017, the Company issued $750 million in aggregate principal amount at maturity of 2027 Notes at a stated coupon rate of
3.8%. The 2027 Notes were issued at 99.294% of par, resulting in a yield to maturity of 3.885%. The net proceeds from the
offering of $744.7 million, after original issue discount, were used to redeem the outstanding $500 million in aggregate
principal amount of the senior unsecured notes due 2023 at a redemption price equal to 100% of the principal amount thereof,
plus a "make-whole" premium of $17.0 million, as well as to refinance a portion of the Company's $500 million prior term loan
facility.
In November 2021, the Company paid $221.5 million for the purchase of $200 million in aggregate principal amount of the
2027 Notes, including an early tender premium of $21.0 million and related fees of $0.5 million. In connection with this
transaction, the Company recognized a loss of $23.9 million on the extinguishment of debt.
Prior to June 15, 2027, the Company, at its option, may redeem the 2027 Notes, in whole or in part, at a redemption price equal
to 100% of the principal amount thereof, plus a "make-whole" premium as of, and accrued and unpaid interest to, the
redemption date. On or after June 15, 2027, but prior to the maturity date of September 15, 2027, the Company, at its option,
may redeem the 2027 Notes, in whole or in part, at a redemption price equal to 100% of the principal amount thereof, plus
accrued and unpaid interest to the redemption date.
2029 and 2049 Notes Issued in 2019
In 2019, the Company issued $375 million in aggregate principal amount at maturity of 2029 Notes and $325 million in
aggregate principal amount at maturity of 2049 Notes. The 2029 Notes have a stated coupon rate of 4.25% and were issued at
99.691% of par, resulting in a yield to maturity of 4.288%. The 2049 Notes have a stated coupon rate of 5.25% and were issued
at 98.32% of par, resulting in a yield to maturity of 5.363%.
75
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The net proceeds from the offering of $693.3 million, after original issue discount, were used to redeem $325 million in
aggregate principal amount of 5.375% senior notes due 2024 (the "2024 Notes") at a redemption price equal to 102.688% of the
principal amount of such 2024 Notes, plus accrued interest, as well as to finance the acquisition of Xevo and for general
corporate purposes.
Prior to February 15, 2029, the Company, at its option, may redeem the 2029 Notes, in whole or in part, at a redemption price
equal to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to,
but not including, the redemption date. On or after February 15, 2029, the Company, at its option, may redeem the 2029 Notes,
at any time, in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to 100% of
the principal amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
Prior to November 15, 2048, the Company, at its option, may redeem the 2049 Notes, in whole or in part, at a redemption price
equal to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to,
but not including, the redemption date. On or after November 15, 2048, the Company, at its option, may redeem the 2049
Notes, at any time, in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to
100% of the principal amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
2030 Notes and 2049 Notes Issued in 2020
In 2020, the Company issued $350 million in aggregate principal amount at maturity of 2030 Notes and $300 million in
aggregate principal amount at maturity of 2049 Notes. The 2030 Notes have a stated coupon rate of 3.5% and were issued at
99.774% of par, resulting in a yield to maturity of 3.525%. The 2049 Notes have a stated coupon rate of 5.25% and were issued
at 106.626% of par, resulting in a yield to maturity of 4.821%.
The net proceeds from the offering were $669.1 million after original issue discount. The proceeds were used to redeem
$650 million in aggregate principal amount of 5.25% senior notes due 2025 (the "2025 Notes") at a redemption price equal to
102.625% of the principal amount of such 2025 Notes, plus accrued interest.
Prior to February 28, 2030, the Company, at its option, may redeem the 2030 Notes, in whole or in part, at a redemption price
equal to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to,
but not including, the redemption date. On or after February 28, 2030, the Company, at its option, may redeem the 2030 Notes,
at any time, in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to 100% of
the principal amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
Prior to November 15, 2048, the Company, at its option, may redeem the 2049 Notes, in whole or in part, at a redemption price
equal to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to,
but not including, the redemption date. On or after November 15, 2048, the Company, at its option, may redeem the 2049
Notes, at any time, in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to
100% of the principal amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
In connection with these transactions, the Company recognized a loss of $21.1 million on the extinguishment of debt and paid
related issuance costs of $6.0 million in 2020.
2032 Notes and 2052 Notes Issued in 2021
In 2021, the Company issued $350 million in aggregate principal amount at maturity of 2032 Notes and $350 million in
aggregate principal amount at maturity of 2052 Notes. The 2032 Notes have a stated coupon rate of 2.6% and were issued at
99.782% of par, resulting in a yield to maturity of 2.624%. The 2052 Notes have a stated coupon rate of 3.55% and were issued
at 99.845% of par, resulting in a yield to maturity of 3.558%.
The net proceeds from the offering of $698.7 million, after original issue discount, were used, in part, to fund the tender of $200
million in aggregate principal amount of 2027 Notes (see "— 2027 Notes" above) and the repayment in full of $206.3 million
outstanding on the Company's $250 million term loan facility (see "— Credit Agreement" below). The remaining net proceeds
were used to finance the 2022 acquisition of Kongsberg ICS (Note 4, "Acquisition of Kongsberg ICS") and for general
corporate purposes.
Prior to October 15, 2031, the Company, at its option, may redeem the 2032 Notes, in whole or in part, at a redemption price
equal to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to,
but not including, the redemption date. On or after October 15, 2031, the Company, at its option, may redeem the 2032 Notes,
at any time, in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to 100% of
the principal amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
76
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Prior to July 15, 2051, the Company, at its option, may redeem the 2052 Notes, in whole or in part, at a redemption price equal
to 100% of the principal amount thereof, plus the applicable premium, if any, as of, and accrued and unpaid interest to, but not
including, the redemption date. On or after July 15, 2051, the Company, at its option, may redeem the 2052 Notes, at any time,
in whole or in part, on not less than 15 nor more than 60 days' prior notice, at a redemption price equal to 100% of the principal
amount thereof, plus accrued and unpaid interest to, but not including, the redemption date.
In connection with these transactions, the Company paid related issuance costs of $7.1 million in 2021.
Covenants
Subject to certain exceptions, the indentures governing the Notes contain restrictive covenants that, among other things, limit
the ability of the Company to: (i) create or permit certain liens and (ii) consolidate, merge or sell all or substantially all of the
Company's assets. The indentures governing the Notes also provide for customary events of default. As of December 31, 2022,
the Company was in compliance with all covenants under the indentures governing the Notes.
Credit Agreement
In 2017, the Company entered into an unsecured credit agreement consisting of a $1.75 billion revolving credit facility (the
"Revolving Credit Facility") and a $250 million term loan facility (the "Term Loan Facility"). In October 2021, the Company
entered into an amended and restated credit agreement (the "Credit Agreement") that increased the Revolving Credit Facility to
$2.0 billion and extended the maturity date to October 28, 2026. In connection with the amendment and restatement, the
Company recognized a loss of $0.4 million on the extinguishment of debt and paid related issuance costs of $2.8 million.
In 2022, aggregate borrowings and repayments under the Revolving Credit Facility were $65.0 million. In 2021, there were no
borrowings or repayments under the Revolving Credit Facility. In the first quarter of 2020, as a proactive measure in response
to the COVID-19 pandemic, the Company borrowed $1.0 billion under the Revolving Credit Facility, which was repaid in full
in the third quarter of 2020. As of December 31, 2022 and 2021, there were no borrowings outstanding under the Revolving
Credit Facility.
In 2021, the Company made principal payments under the Term Loan Facility of $220.3 million, including full repayment of
$206.3 million in November 2021. In connection with the full repayment, the Company recognized a loss of $0.3 million on the
extinguishment of debt. In 2020, the Company made required principal payments under the Term Loan Facility of $14.1
million.
Advances under the Revolving Credit Facility generally bear interest based on (i) the Eurocurrency Rate (as defined in the
Credit Agreement) or (ii) the Base Rate (as defined in the Credit Agreement) plus a margin, determined in accordance with a
pricing grid. As of December 31, 2022, the ranges and rates are as follows (in percentages):
Revolving Credit Facility
Eurocurrency Rate
Base Rate
Minimum
Maximum
0.925 % 1.450 %
Rate as of
December 31,
2022
Minimum
Maximum
1.125 % 0.000 % 0.450 %
Rate as of
December 31,
2022
0.125 %
The facility fee, which ranges from 0.075% to 0.20% of the total amount committed under the Revolving Credit Facility, is
payable quarterly.
Covenants
The Credit Agreement contains various customary representations, warranties and covenants by the Company, including,
without limitation, (i) covenants regarding maximum leverage, (ii) limitations on fundamental changes involving the Company
or its subsidiaries and (iii) limitations on indebtedness and liens. As of December 31, 2022, the Company was in compliance
with all covenants under the Credit Agreement.
Delayed-Draw Term Loan Facility
In December 2022, the Company entered into an unsecured $150 million committed delayed-draw term loan facility (the
"Delayed-Draw Facility") that matures 3 years after the funding date. The Delayed-Draw Facility is expected to be used to
finance the acquisition of I.G. Bauerhin ("IGB") upon closing of the transaction and for general corporate purposes. Advances
under the Delayed-Draw Facility generally bear interest based on the Daily or Term Secured Overnight Financing Rate
("SOFR"), as defined in the Delayed-Draw Facility agreement, plus a margin determined in accordance with a pricing grid that
ranges from 1.00% to 1.525%.
77
Table of Contents
As of December 31, 2022, there were no amounts drawn under the Delayed-Draw Facility.
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Covenants
The Delayed-Draw Facility contains the same covenants as the Credit Agreement. As of December 31, 2022, the Company was
in compliance with all covenants under the Delayed-Draw Facility.
Other
As of December 31, 2022 and 2021, other long-term debt, including the current portion, consisted of amounts outstanding under
an unsecured working capital loan and a finance lease agreement.
(8) Leases
The Company has operating leases for production, office and warehouse facilities, manufacturing and office equipment and
vehicles. Operating lease assets and obligations included in the accompanying consolidated balance sheet are shown below (in
millions):
December 31,
Right-of-use assets under operating leases:
Other long-term assets
Lease obligations under operating leases:
Accrued liabilities
Other long-term liabilities
Maturities of lease obligations as of December 31, 2022, are shown below (in millions):
2023
2024
2025
2026
2027
Thereafter
Total undiscounted cash flows
Less: Imputed interest
Lease obligations under operating leases
2022
2021
$
$
$
701.8 $
627.9
136.8 $
595.1
731.9 $
125.6
523.6
649.2
$
$
159.7
140.3
119.5
101.1
83.2
215.9
819.7
(87.8)
731.9
In addition to the right-of-use assets obtained in exchange for operating lease obligations shown below, the Company acquired
$34.1 million of right-of-use assets and related lease obligations in connection with its acquisition of Kongsberg ICS (Note 4,
"Acquisition of Kongsberg ICS") in 2022.
The Company entered into a lease contract that commences in the first quarter of 2023. The contract has a lease term of
approximately ten years and a right-of-use asset and related lease obligation of $15.8 million.
Cash flow information related to operating leases is shown below (in millions):
For the year ended December 31,
Non-cash activity:
2022
2021
2020
Right-of-use assets obtained in exchange for operating lease obligations
Operating cash flows:
Cash paid related to operating lease obligations
$
$
236.1 $
258.4 $
135.1
164.3 $
164.2 $
143.8
78
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Lease expense included in the accompanying consolidated statement of income is shown below (in millions):
For the year ended December 31,
Operating lease expense
Short-term lease expense
Variable lease expense
Total lease expense
2022
2021
2020
$
164.5 $
160.3 $
148.6
22.1
8.4
19.4
7.9
15.4
8.0
$
195.0 $
187.6 $
172.0
The Company's short-term lease expense excludes leases with a duration of one month or less.
Variable lease expense includes payments based on performance or usage, as well as changes to index and rate-based lease
payments. Additionally, the Company evaluated its supply contracts with its customers and concluded that variable lease
expense in these arrangements is not material.
For the years ended December 31, 2022, 2021 and 2020, the Company recognized impairment charges of $6.5 million, $7.2
million and $2.0 million, respectively, related to its right-of-use assets in conjunction with its restructuring actions (Note 5,
"Restructuring"). In the year ended December 31, 2022, the Company recognized additional right-of-use asset impairment
charges of $7.0 million related to its Russian operations (Note 2, "Current Operating Environment"). The impairment charges
are included in cost of sales in the accompanying consolidated statements of income.
The weighted average lease term and discount rate for operating leases as of December 31, 2022, are shown below:
Weighted average remaining lease term
Weighted average discount rate
(9) Income Taxes
Seven years
3.5 %
A summary of consolidated income before provision for income taxes and equity in net income of affiliates and the components
of provision for income taxes is shown below (in millions):
For the year ended December 31,
Consolidated income before provision for income taxes and equity in net
income of affiliates:
Domestic
Foreign
Domestic benefit for income taxes:
Current provision
Deferred benefit
Total domestic benefit
Foreign provision for income taxes:
Current provision
Deferred (benefit) provision
Total foreign provision
Provision for income taxes
2022
2021
2020
$
$
$
$
$
$
$
87.6 $
(110.9) $
(145.0)
421.7
694.4
509.3 $
583.5 $
444.3
299.3
35.3 $
(41.4)
(6.1) $
38.4 $
(76.6)
(38.2) $
147.8 $
154.8 $
(8.0)
139.8 $
133.7 $
21.1
175.9 $
137.7 $
29.0
(106.2)
(77.2)
149.6
21.5
171.1
93.9
The domestic current provision includes withholding taxes related to dividends and royalties paid by the Company's foreign
subsidiaries, as well as state and local taxes. In 2022, 2021 and 2020, the provision for income taxes includes the benefit of
prior unrecognized net operating loss carryforwards of $0.8 million, $2.9 million and $5.3 million, respectively.
79
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
A summary of the differences between the provision for income taxes calculated at the United States federal statutory income
tax rate of 21% and the consolidated provision for income taxes is shown below (in millions):
For the year ended December 31,
2022
2021
2020
Consolidated income before provision for income taxes and equity in net
income of affiliates multiplied by the United States federal statutory income
tax rate
Differences in income taxes on foreign earnings, losses and remittances
Valuation allowance adjustments (1)
Research and development and other tax credits
$
FDII deduction
U.S. tax impact of foreign earnings (2)
Tax audits and assessments
Other
Provision for income taxes
107.0 $
24.5
45.2
(15.0)
(16.9)
(6.3)
3.2
(8.0)
122.5 $
30.4
29.0
(19.0)
(6.0)
(9.8)
3.2
(12.6)
137.7 $
62.9
20.7
47.7
(11.8)
(14.6)
(21.1)
8.9
1.2
93.9
$
133.7 $
(1) Relates primarily to changes in valuation allowances on the deferred tax assets of foreign subsidiaries.
(2) Reflects the impact on the domestic provision for income taxes related to foreign source income, including foreign branch earnings net of the applicable
foreign tax credits in the general, foreign branch, GILTI and passive separate limitation categories. This amount includes the U.S. tax impact of
apportioning U.S. expenses against the GILTI basket in calculating the foreign tax credit limitation resulting in no tax benefit for these expenses due to the
Company's excess foreign tax credit position in the GILTI basket for 2021 and 2020. In 2020, as a result of the change in the foreign branch basket
limitation, the Company recognized tax benefits of $15.5 million related to the U.S. deferred tax effect of the foreign branches.
For the years ended December 31, 2022, 2021 and 2020, income in foreign jurisdictions with tax holidays was $40.5 million,
$55.6 million and $29.4 million, respectively. Such tax holidays generally expire from 2022 through 2035.
Deferred income taxes represent temporary differences in the recognition of certain items for financial reporting and income tax
purposes. A summary of the components of the net deferred income tax asset is shown below (in millions):
December 31,
Deferred income tax assets (liabilities):
Tax loss carryforwards
Tax credit carryforwards
Retirement benefit plans
Accrued liabilities
Self-insurance reserves
Current asset basis differences
Long-term asset basis differences
Deferred compensation
Capitalized engineering, research and development
Undistributed earnings of foreign subsidiaries
Derivative instruments and hedging activities
Other
Net deferred income tax asset before valuation allowance
Valuation allowance
Net deferred income tax asset
2022
2021
397.4 $
243.9
22.6
208.7
5.5
42.0
3.5
25.8
169.6
(71.7)
(10.7)
1.8
1,038.4
(417.9)
620.5 $
396.9
266.4
55.8
193.9
6.7
41.4
(24.2)
25.4
138.3
(74.0)
2.0
(12.3)
1,016.3
(406.9)
609.4
$
$
As of December 31, 2022 and 2021, the valuation allowance with respect to the Company's deferred tax assets was $417.9
million and $406.9 million, respectively, a net increase of $11.0 million.
Concluding that a valuation allowance is not required is difficult when there is significant negative evidence, such as
cumulative losses in recent years, which is objective and verifiable. When measuring cumulative losses in recent years, the
Company uses a rolling three-year period of pretax book income, adjusted for permanent differences between book and taxable
income and certain other items. As of December 31, 2022, the Company continues to maintain a U.S. valuation allowance of
$25.5 million, primarily related to U.S. state and local deferred tax assets that, due to their nature, are not likely to be
80
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
realized. In addition, the Company continues to maintain a valuation allowance of $392.4 million with respect to its deferred tax
assets in several international jurisdictions.
The classification of the net deferred income tax asset is shown below (in millions):
December 31,
Long-term deferred income tax assets
Long-term deferred income tax liabilities
Net deferred income tax asset
2022
2021
$
$
709.2 $
(88.7)
620.5 $
701.4
(92.0)
609.4
As of December 31, 2022, deferred income taxes have not been provided on the undistributed earnings of the Company's
foreign subsidiaries since these earnings will not be taxable upon repatriation to the United States. These earnings will be
primarily treated as previously taxed income from either the one-time transition tax or GILTI, or they will be offset with a
100% dividend received deduction. However, the Company continues to provide a deferred tax liability for foreign withholding
tax that will be incurred with respect to the undistributed foreign earnings that are not permanently reinvested.
As of December 31, 2022, the Company had tax loss carryforwards of $1.7 billion. Of the total tax loss carryforwards, $1.4
billion have no expiration date, and $263.7 million expire between 2023 and 2039. In addition, the Company had tax credit
carryforwards of $243.9 million, comprised principally of U.S. foreign tax credits of $80.7 million that expire between 2027
and 2031, U.S. research and development credits of $119.7 million that expire between 2025 and 2042 and other tax credits
primarily in international jurisdictions of $43.5 million that generally expire between 2023 and 2042.
As of December 31, 2022 and 2021, the Company's gross unrecognized tax benefits were $32.7 million and $34.9 million
(excluding interest and penalties), respectively, which is recorded in other long-term liabilities in the accompanying
consolidated balance sheets. If recognized, all of the Company's gross unrecognized tax benefits would affect the Company's
effective tax rate.
A summary of the changes in gross unrecognized tax benefits is shown below (in millions):
For the year ended December 31,
Balance at beginning of period
Additions based on tax positions related to current year
Additions (reductions) based on tax positions related to prior years
Settlements
Statute expirations
Foreign currency translation
Balance at end of period
2022
2021
2020
34.9 $
4.8
—
(1.9)
(6.3)
1.2
32.7 $
36.4 $
7.7
(4.0)
(0.3)
(5.2)
0.3
34.9 $
31.6
4.9
3.6
(1.2)
(4.7)
2.2
36.4
$
$
The Company recognizes interest and penalties with respect to unrecognized tax benefits as income tax expense. As of
December 31, 2022 and 2021, the Company had recorded gross reserves of $12.3 million and $12.7 million, respectively,
related to interest and penalties, all of which, if recognized, would affect the Company's effective tax rate.
The Company operates in multiple jurisdictions throughout the world, and its tax returns are periodically audited or subject to
review by both domestic and foreign tax authorities. During the next twelve months, it is reasonably possible that, as a result of
audit settlements, the conclusion of current examinations and the expiration of the statute of limitations in multiple jurisdictions,
the Company may decrease the amount of its gross unrecognized tax benefits by $5.1 million, all of which, if recognized, would
affect the Company's effective tax rate. The gross unrecognized tax benefits subject to potential decrease involve issues related
to transfer pricing and various other tax items in multiple jurisdictions. However, as a result of ongoing examinations, tax
proceedings in certain countries, additions to the gross unrecognized tax benefits for positions taken and interest and penalties,
if any, arising in 2023, it is not possible to estimate the potential net increase or decrease to the Company's gross unrecognized
tax benefits during the next twelve months.
The Company considers its significant tax jurisdictions to include China, Germany, Italy, Mexico, Morocco, Spain, the United
Kingdom and the United States. The Company or its subsidiaries generally remain subject to income tax examination in certain
U.S. state and local jurisdictions for years after 2016. Further, the Company or its subsidiaries remain subject to income tax
examination in Spain for years after 2007, in Mexico for years after 2013, in Germany and Italy for years after 2015, in
Morocco for years after 2017, in China and the United Kingdom for years after 2018 and in the United States generally for
years after 2020.
81
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
On August 16, 2022, the Inflation Reduction Act of 2022 ("IRA") was signed into law. The IRA contains a number of revisions
to the Internal Revenue Code, including a 15% corporate minimum tax and a 1% excise tax on share repurchases, both of which
are effective for tax years beginning after December 31, 2022, as well as numerous renewable energy credits. The Company is
evaluating the impact of the IRA; however, the tax-related provisions of the IRA are not expected to have a material impact on
the Company's consolidated financial statements.
Other
In 2021, the Brazilian Supreme Court ruled on certain matters, including the method of determining the amount of indirect tax
credits that taxpayers are entitled to monetize in future periods. As a result of the ruling, other expense, net includes a gain of
$45.0 million for the year ended December 31, 2021, for which $8.0 million of tax expense was recognized.
(10) Pension and Other Postretirement Benefit Plans
The Company has noncontributory defined benefit pension plans covering certain domestic employees and certain employees in
foreign countries, principally Canada. The Company's salaried pension plans provide benefits based on final average earnings
formulas. The Company's hourly pension plans provide benefits under flat benefit and cash balance formulas. The Company
also has contractual arrangements with certain employees which provide for supplemental retirement benefits. In general, the
Company's policy is to fund its pension benefit obligation based on legal requirements, tax and liquidity considerations and
local practices.
The Company has postretirement benefit plans covering certain domestic and Canadian retirees. The Company's postretirement
benefit plans generally provide for the continuation of medical benefits for eligible retirees. The Company does not fund its
postretirement benefit obligation. Rather, payments are made as costs are incurred by covered retirees.
Obligation
A reconciliation of the change in benefit obligation for the years ended December 31, 2022 and 2021, is shown below (in
millions):
Pension
Other Postretirement
December 31, 2022
December 31, 2021
December 31, 2022
December 31, 2021
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
$ 536.5 $ 479.9 $ 564.4 $ 529.2
$ 56.0 $ 24.5 $ 61.2 $ 27.4
—
15.5
4.2
11.2
—
14.5
5.3
10.5
—
1.5
—
0.7
—
1.4
(142.3)
(21.8)
(98.3)
(22.9)
(23.0)
(19.4)
(32.8)
(24.3)
(25.8)
(2.6)
(4.8)
(1.2)
(3.5)
(3.1)
—
0.7
(2.4)
(1.4)
—
(8.0)
$ 387.9 $ 339.5 $ 536.5 $ 479.9
(34.6)
—
—
0.2
$ 29.1 $ 17.6 $ 56.0 $ 24.5
(1.6)
—
Change in benefit obligation:
Benefit obligation at beginning of
period
Service cost
Interest cost
Actuarial gains
Benefits paid
Translation adjustment
Benefit obligation at end of period
Actuarial gains
As of December 31, 2022 and 2021, the decrease in pension and other postretirement benefit obligations attributable to actuarial
gains relates to an increase in the discount rate used to determine the benefit obligations (see assumptions below). As of
December 31, 2022, the decrease in the U.S. other postretirement benefit obligation attributable to actuarial gains also relates to
per capita and demographic updates.
82
Table of Contents
Plan Assets and Funded Status
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
A reconciliation of the change in plan assets for the years ended December 31, 2022 and 2021, and the funded status as of
December 31, 2022 and 2021, is shown below (in millions):
Pension
Other Postretirement
December 31, 2022
December 31, 2021
December 31, 2022
December 31, 2021
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
Change in plan assets:
Fair value of plan assets at
beginning of period
$ 444.2 $ 392.5 $ 418.2 $ 383.0
$ — $ — $ — $ —
Actual return on plan assets
(77.1)
(41.0)
43.0
Employer contributions
3.2
6.1
2.4
26.9
5.6
—
2.6
—
1.2
—
3.1
—
1.4
Benefits paid
(21.8)
(22.9)
(19.4)
(24.3)
(2.6)
(1.2)
(3.1)
(1.4)
Translation adjustment
Fair value of plan assets at end of
period
—
(27.7)
—
1.3
348.5
307.0
444.2
392.5
—
—
—
—
—
—
—
—
Funded status
$ (39.4) $ (32.5) $ (92.3) $ (87.4) $ (29.1) $ (17.6) $ (56.0) $ (24.5)
A summary of amounts recognized in the consolidated balance sheets as of December 31, 2022 and 2021, is shown below (in
millions):
Pension
Other Postretirement
December 31, 2022
December 31, 2021
December 31, 2022
December 31, 2021
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
Amounts recognized in the consolidated balance sheet:
Other long-term assets
$ — $ 62.3 $ — $ 41.7
$ — $ — $ — $ —
Accrued liabilities
(2.9)
(3.4)
(3.3)
(3.8)
(2.6)
(1.4)
(4.0)
(1.5)
Other long-term liabilities
(36.5)
(91.4)
(89.0) (125.3)
(26.5)
(16.2)
(52.0)
(23.0)
Funded status
$ (39.4) $ (32.5) $ (92.3) $ (87.4) $ (29.1) $ (17.6) $ (56.0) $ (24.5)
Accumulated Benefit Obligation
As of December 31, 2022 and 2021, the accumulated benefit obligation for all of the Company's pension plans was $720.5
million and $1,012.4 million, respectively.
As of December 31, 2022 and 2021, the majority of the Company's pension plans had accumulated benefit obligations in excess
of plan assets. Information related to pension plans with accumulated benefit obligations in excess of plan assets is shown
below (in millions):
December 31,
Projected benefit obligation
Accumulated benefit obligation
Fair value of plan assets
2022
2021
$
482.7 $
476.0
348.6
761.2
757.2
539.8
83
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Other Comprehensive Income (Loss) and Accumulated Other Comprehensive Loss
Pretax amounts recognized in other comprehensive income (loss) for the years ended December 31, 2022 and 2021, are shown
below (in millions):
Actuarial gains (losses) recognized:
Reclassification adjustments
Actuarial gain arising during
the period
Effect of settlements
Prior service credit recognized:
Reclassification adjustments
Translation adjustment
Pension
Other Postretirement
December 31, 2022
December 31, 2021
December 31, 2022
December 31, 2021
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
$
2.0 $
4.1 $
3.9 $
6.0
$
(1.2) $ — $
(1.1) $ —
41.3
0.4
—
—
42.2
(0.2)
42.5
0.4
—
7.3
—
—
40.1
0.1
—
1.4
25.8
—
4.8
—
3.5
—
(0.1)
—
(0.1)
—
(0.1)
—
$ 43.7 $ 53.4 $ 46.8 $ 47.6
$ 24.5 $
4.7 $
2.3 $
2.4
—
—
—
2.4
In addition, the Company recognized tax benefit (expense) in other comprehensive income (loss) related to its defined benefit
plans of ($24.9) million, ($22.7) million and $18.5 million for the years ended December 31, 2022, 2021 and 2020,
respectively.
Pretax amounts recorded in accumulated other comprehensive loss not yet recognized in net periodic benefit cost as of
December 31, 2022 and 2021, are shown below (in millions):
Pension
Other Postretirement
December 31, 2022
December 31, 2021
December 31, 2022
December 31, 2021
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
Net unrecognized actuarial gain
(loss)
$ (58.9) $ (60.7) $ (102.6) $ (114.0) $ 38.2 $
4.1 $ 13.6 $
(0.6)
Prior service credit (cost)
—
(0.5)
—
(0.6)
1.0
0.1
1.1
0.1
$ (58.9) $ (61.2) $ (102.6) $ (114.6) $ 39.2 $
4.2 $ 14.7 $
(0.5)
The Company uses the corridor approach when amortizing actuarial gains and losses. Under the corridor approach, net
unrecognized actuarial gains and losses in excess of 10% of the greater of i) the projected benefit obligation or ii) the fair value
of plan assets are amortized over future periods. For plans with little to no active participants, the amortization period is the
remaining average life expectancy of the participants. For plans with active participants, the amortization period is the
remaining average service period of the active participants. The amortization periods range from 3 to 32 years for the
Company's defined benefit pension plans and from 7 to 16 years for the Company's other postretirement benefit plans.
Net Periodic Pension and Other Postretirement Benefit Cost (Credit)
The components of the Company's net periodic pension benefit cost (credit) are shown below (in millions):
Pension
Service cost
Interest cost
Expected return on plan assets
Amortization of actuarial loss
Settlement (gains) losses
Year Ended December 31,
2022
2021
2020
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
$
— $
4.2 $
— $
5.3 $
0.1 $
15.5
11.2
14.5
10.5
16.4
5.0
12.2
(23.9)
(17.2)
(23.5)
(19.6)
(21.4)
(19.6)
2.0
0.4
4.1
(0.2)
3.9
0.4
6.1
—
2.3
0.3
5.2
13.0
15.8
Net periodic benefit cost (credit)
$
(6.0) $
2.1 $
(4.7) $
2.3 $
(2.3) $
84
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The components of the Company's net periodic other postretirement benefit cost (credit) are shown below (in millions):
Other Postretirement
Interest cost
Amortization of actuarial gain
Amortization of prior service credit
Net periodic benefit cost (credit)
Year Ended December 31,
2022
2021
2020
U.S.
Foreign
U.S.
Foreign
U.S.
Foreign
$
$
1.5 $
(1.2)
(0.1)
0.2 $
0.7 $
—
—
0.7 $
1.4 $
(1.1)
(0.1)
0.2 $
0.7 $
—
—
0.7 $
1.7 $
(1.6)
(0.2)
(0.1) $
0.7
—
—
0.7
For the year ended December 31, 2020, the Company recognized pension settlement losses of $12.9 million related to its
restructuring actions (Note 5, "Restructuring").
Assumptions
The weighted average actuarial assumptions used in determining the benefit obligations are shown below:
December 31,
Discount rate:
Domestic plans
Foreign plans
Rate of compensation increase:
Foreign plans
Pension
Other Postretirement
2022
2021
2022
2021
5.5%
5.0%
3.0%
2.5%
5.5%
5.3%
2.8%
3.1%
2.5%
3.5%
N/A
N/A
The weighted average actuarial assumptions used in determining the net periodic benefit cost (credit) are shown below:
For the year ended December 31,
Pension
Discount rate:
Domestic plans
Foreign plans
Expected return on plan assets:
Domestic plans
Foreign plans
Rate of compensation increase:
Foreign plans
Other postretirement
Discount rate:
Domestic plans
Foreign plans
2022
2021
2020
3.0 %
2.5 %
5.5 %
4.6 %
2.6 %
2.0 %
5.8 %
5.2 %
3.4 %
2.6 %
5.8 %
5.4 %
3.5 %
3.3 %
3.7 %
2.8 %
3.1 %
2.4 %
2.5 %
3.2 %
3.1 %
The expected return on plan assets is determined based on several factors, including adjusted historical returns, historical risk
premiums for various asset classes and target asset allocations within the portfolio. Adjustments made to the historical returns
are based on recent return experience in the equity and fixed income markets and the belief that deviations from historical
returns are likely over the relevant investment horizon.
As of December 31, 2022 and 2021, the weighted-average interest crediting rate used by one of the Company's U.S. pension
plans was a minimum of 4.0%.
85
Table of Contents
Healthcare Trend Rate
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The assumed healthcare cost trend rates used to measure the postretirement benefit obligation as of December 31, 2022, are
shown below:
Initial healthcare cost trend rate
Ultimate healthcare cost trend rate
Year ultimate healthcare cost trend rate achieved
Plan Assets
U.S. Plans
Foreign Plans
6.5%
4.5%
2030
4.5%
4.0%
2040
Fair value measurements and the related valuation techniques and fair value hierarchy level for the Company's pension plan
assets measured at fair value on a recurring basis as of December 31, 2022 and 2021, are shown below (in millions):
U.S. Plans:
Equity securities -
Equity funds
Common stock
Fixed income -
Fixed income funds
Corporate bonds
Government obligations
Preferred stock
Cash and short-term investments
Assets at fair value
Investments measured at net asset value -
Alternative investments
Assets at fair value
Foreign Plans:
Equity securities -
Equity funds
Common stock
Fixed income -
Fixed income funds
Corporate bonds
Government obligations
Cash and short-term investments
Assets at fair value
Investments measured at net asset value -
Alternative investments
Assets at fair value
December 31, 2022
Total
Level 1
Level 2
Level 3
Valuation
Technique
$
65.2 $
52.1 $
13.1 $
54.9
39.8
15.1
79.1
63.4
9.7
0.2
13.4
79.1
—
—
0.2
2.8
—
63.4
9.7
—
10.6
— Market
— Market
— Market
— Market
— Market
— Market
— Market
285.9 $
174.0 $
111.9 $
—
$
$
62.6
348.5
55.2 $
32.9
— $
32.9
55.2 $
—
— Market
— Market
43.4
15.9
113.2
13.3
—
—
—
3.2
43.4
15.9
113.2
10.1
— Market
— Market
— Market
— Market
273.9 $
36.1 $
237.8 $
—
33.1
$
307.0
86
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
U.S. Plans:
Equity securities -
Equity funds
Common stock
Fixed income -
Fixed income funds
Corporate bonds
Government obligations
Preferred stock
Cash and short-term investments
Assets at fair value
Investments measured at net asset value -
Alternative investments
Assets at fair value
Foreign Plans:
Equity securities -
Equity funds
Common stock
Fixed income -
Fixed income funds
Corporate bonds
Government obligations
Cash and short-term investments
Assets at fair value
Investments measured at net asset value -
Alternative investments
Assets at fair value
December 31, 2021
Total
Level 1
Level 2
Level 3
Valuation
Technique
$
100.9 $
80.0 $
20.9 $
87.1
56.3
30.8
95.1
83.8
5.2
1.2
8.5
95.1
—
—
0.4
2.1
—
83.8
5.2
0.8
6.4
— Market
— Market
— Market
— Market
— Market
— Market
— Market
381.8 $
233.9 $
147.9 $
—
62.4
$
444.2
$
147.2 $
— $
147.2 $
59.5
59.5
—
63.3
28.8
51.8
13.0
—
—
—
7.9
63.3
28.8
51.8
5.1
— Market
— Market
— Market
— Market
— Market
— Market
363.6 $
67.4 $
296.2 $
—
28.9
$
392.5
For further information on the GAAP fair value hierarchy, see Note 16, "Financial Instruments." Pension plan assets for the
foreign plans relate to the Company's pension plans primarily in Canada and the United Kingdom.
The Company's investment policies incorporate an asset allocation strategy that emphasizes the long-term growth of capital.
The Company believes that this strategy is consistent with the long-term nature of plan liabilities and ultimate cash needs of the
plans. For the domestic portfolio, the Company targets a return seeking asset (e.g., equity securities, equity mutual funds and
exchange traded funds ("ETFs") and alternative investments) allocation of 45% — 65% and a risk mitigating asset (e.g., fixed
income securities and fixed income mutual funds and ETFs) allocation of 35% — 55%. As the funding ratio for the defined
benefit pension plans covering certain domestic employees changes, the proportion of return seeking assets will be adjusted
accordingly. For the foreign portfolio, the Company targets an equity allocation of 20% — 60% of plan assets, a fixed income
allocation of 30% — 70%, an alternative investment allocation of 0% — 25% and a cash allocation of 0% — 15%. Differences
in the target allocations of the domestic and foreign portfolios are reflective of differences in the underlying plan liabilities.
Diversification within the investment portfolios is pursued by asset class and investment management style. The investment
portfolios are reviewed on a quarterly basis to maintain the desired asset allocations, given the market performance of the asset
classes and investment management styles. Alternative investments are redeemable in the near term, generally with 90 days'
notice.
The Company utilizes investment management firms to manage these assets in accordance with the Company's investment
policies. Excluding alternative investments, mutual funds and ETFs, retained investment managers are provided investment
guidelines, which restrict the use of certain assets, including commodities contracts, futures contracts, options, venture capital,
real estate, interest-only or principal-only strips and investments in the Company's own debt or equity. Derivative instruments
87
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
are also prohibited without the specific approval of the Company. Investment managers are limited in the maximum size of
individual security holdings and the maximum exposure to any one industry relative to the total portfolio. Fixed income
managers are provided further investment guidelines that indicate minimum credit ratings for debt securities and limitations on
weighted average maturity and portfolio duration.
The Company evaluates investment manager performance against market indices which the Company believes are appropriate
to the investment management style for which the investment manager has been retained. The Company's investment policies
incorporate an investment goal of aggregate portfolio returns which exceed the returns of the appropriate market indices by a
reasonable spread over the relevant investment horizon.
Contributions
In 2023, the Company's minimum required contributions to its domestic and foreign pension plans are expected to be
approximately $1 million. The Company may elect to make contributions in excess of minimum funding requirements in
response to investment performance or changes in interest rates or when the Company believes that it is financially
advantageous to do so and based on its other cash requirements. After 2023, the Company's minimum funding requirements
will depend on several factors, including investment performance and interest rates. The Company's minimum funding
requirements may also be affected by changes in applicable legal requirements.
Benefit Payments
As of December 31, 2022, the Company's estimate of expected benefit payments in each of the five succeeding years and in the
aggregate for the five years thereafter are shown below (in millions):
Year
2023
2024
2025
2026
2027
Five years thereafter
Multi-Employer Pension Plans
Pension
Other Postretirement
U.S.
Foreign
U.S.
Foreign
$
$
22.8 $
23.0
24.0
25.1
25.1
134.7
21.6
21.9
22.7
24.6
24.6
134.3
2.6 $
2.7
2.6
2.6
2.5
11.3
1.5
1.5
1.5
1.5
1.5
6.7
The Company currently participates in two multi-employer pension plans, the U.A.W. Labor-Management Group Pension Plan
(EIN 51-6099782-001) and UNITE Here National Retirement Fund (EIN 13-6130178-001), for certain of its employees.
Contributions to these plans are based on four collective bargaining agreements, which expire between July 21, 2024 and June
30, 2027.
Detailed information related to these plans is shown below (amounts in millions):
Pension Protection Act
Zone Status
Employer Identification
Number ("EIN")
51-6099782-001
13-6130178-001
December 31,
2021
Certification
December 31,
2020
Certification
FIP/RP (1)
Pending or
Implemented
Green
Red
Green
Red
Yes
Yes
Surcharge
No
No
Contributions to Multiemployer Pension Plans
Year Ended
December 31,
2022
Year Ended
December 31,
2021
Year Ended
December 31,
2020
$
0.8 $
0.7 $
0.4
0.4
0.6
0.5
(1) Funding improvement plan or rehabilitation plan as defined by Employment Retirement Security Act of 1974.
For its plan years 2022 and 2021, the Company's contributions to the U.A.W. Labor-Management Group Pension Plan
represented more than 5% of the plan's total contributions.
Defined Contribution Plan
The Company also sponsors defined contribution plans and participates in government-sponsored programs in certain foreign
countries. Contributions are determined as a percentage of each covered employee's salary. For the years ended December 31,
2022, 2021 and 2020, the aggregate cost of the defined contribution plans was $18.2 million, $16.4 million and $17.1 million,
respectively.
88
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company also has a defined contribution retirement program for its salaried employees. Contributions to this program are
determined as a percentage of each covered employee's eligible compensation. For the years ended December 31, 2022, 2021
and 2020, the Company recorded expense of $23.5 million, $20.4 million and $18.3 million, respectively, related to this
program.
(11) Revenue Recognition
A summary of the Company's revenue by reportable operating segment and geography is shown below (in millions):
For the year ended December 31,
North America
Europe and Africa
Asia
South America
For the year ended December 31,
North America
Europe and Africa
Asia
South America
For the year ended December 31,
North America
Europe and Africa
Asia
South America
2022
Seating
E-Systems
Total
$ 7,416.3 $ 1,494.4 $ 8,910.7
4,944.0
2,731.9
619.0
2,002.0
6,946.0
1,451.3
4,183.2
232.6
851.6
$ 15,711.2 $ 5,180.3 $ 20,891.5
2021
Seating
E-Systems
Total
$ 6,277.2 $ 1,271.0 $ 7,548.2
4,805.5
2,759.9
568.8
1,939.8
6,745.3
1,468.0
4,227.9
172.9
741.7
$ 14,411.4 $ 4,851.7 $ 19,263.1
2020
Seating
E-Systems
Total
$ 5,545.7 $ 1,084.8 $ 6,630.5
4,371.4
2,418.7
376.9
1,868.9
6,240.3
1,236.6
3,655.3
142.5
519.4
$ 12,712.7 $ 4,332.8 $ 17,045.5
(12) Capital Stock, Accumulated Other Comprehensive Loss and Equity
Common Stock
The Company is authorized to issue up to 300,000,000 shares of Common Stock. The Company's Common Stock is listed on
the New York Stock Exchange under the symbol "LEA" and has the following rights and privileges:
•
•
•
•
Voting Rights – All shares of the Company's common stock have identical rights and privileges. With limited
exceptions, holders of common stock are entitled to one vote for each outstanding share of common stock held of
record by each stockholder on all matters properly submitted for the vote of the Company's stockholders.
Dividend Rights – Subject to applicable law, any contractual restrictions and the rights of the holders of outstanding
preferred stock, if any, holders of common stock are entitled to receive ratably such dividends and other distributions
that the Company's Board of Directors (the "Board"), in its discretion, declares from time to time.
Liquidation Rights – Upon the dissolution, liquidation or winding up of the Company, subject to the rights of the
holders of outstanding preferred stock, if any, holders of common stock are entitled to receive ratably the assets of the
Company available for distribution to the Company's stockholders in proportion to the number of shares of common
stock held by each stockholder.
Conversion, Redemption and Preemptive Rights – Holders of common stock have no conversion, redemption, sinking
fund, preemptive, subscription or similar rights.
89
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Common Stock Share Repurchase Program
The Company may implement share repurchases through a variety of methods, including, but not limited to, open market
purchases, accelerated stock repurchase programs and structured repurchase transactions. The extent to which the Company
may repurchase its outstanding common stock and the timing of such repurchases will depend upon its financial condition,
results of operations, capital requirements, prevailing market conditions, alternative uses of capital and other factors.
The Company has a common stock share repurchase program (the "Repurchase Program") which permits the discretionary
repurchase of its common stock. Since its inception in the first quarter of 2011, the Board has authorized $6.1 billion in share
repurchases under the Repurchase Program. As of December 31, 2022, the Company has repurchased, in aggregate, $4.9 billion
of its outstanding common stock, at an average price of $91.55 per share, excluding commissions and related fees. As of
December 31, 2022, the Company has a remaining repurchase authorization of $1.2 billion under its Repurchase Program,
which expires on December 31, 2024.
In March 2020, as a proactive measure in response to the COVID-19 pandemic, the Company suspended share repurchases
under its Repurchase Program. Share repurchases were reinstated in the second quarter of 2021. Share repurchases are shown
below (in millions, except for shares and per share amounts):
For the year ended December 31,
2022
2021
2020
(1) Excludes commissions.
Aggregate
Repurchases
Cash paid for
Repurchases
Number of
Shares
Average Price
per Share (1)
$
$
$
100.3 $
100.3 $
70.0 $
100.3
100.3
70.0
763,309 $
131.37
589,717 $
170.03
641,149 $
109.22
In addition to shares repurchased under the Repurchase Program described above, the Company classifies shares withheld from
the settlement of the Company's restricted stock unit and performance share awards to cover tax withholding requirements as
common stock held in treasury in the consolidated balance sheet.
Quarterly Dividend
In 2022, the Board declared quarterly cash dividends of $0.77 per share of common stock in all quarters.
In 2021, the Board declared quarterly cash dividends of $0.25 per share of common stock in the first and second quarters, a
quarterly cash dividend of $0.50 per share of common stock in the third quarter and a quarterly cash dividend of $0.77 per share
of common stock in the fourth quarter.
In 2020, the Board declared a quarterly cash dividend of $0.77 per share of common stock in the first quarter. In March 2020,
as a proactive measure in response to the COVID-19 pandemic, the Company suspended its quarterly cash dividend. The
quarterly cash dividend was reinstated in the fourth quarter of 2020 at $0.25 per share of common stock.
Dividends declared and paid are shown below (in millions):
For the year ended December 31,
2022
2021
2020
Dividends declared
Dividends paid
$
$
186.2 $
107.9 $
185.5 $
106.7 $
62.1
67.3
Dividends payable on common shares to be distributed under the Company's stock-based compensation program will be paid
when such common shares are distributed.
Comprehensive Income
Comprehensive income is defined as all changes in the Company's net assets except changes resulting from transactions with
stockholders. It differs from net income in that certain items recorded in equity are included in comprehensive income.
90
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Accumulated Other Comprehensive Loss
A summary of changes in accumulated other comprehensive income (loss), net of tax, is shown below (in millions):
For the year ended December 31,
Defined benefit plans:
Balance at beginning of year
Reclassification adjustments (net of tax expense of $1.0 million in 2022, $2.1
million in 2021 and $4.7 million in 2020)
Other comprehensive income (loss) recognized during the period (net of tax
benefit (expense) of ($23.9) million in 2022, ($20.6) million in 2021 and $23.2
million in 2020)
Balance at end of year
Derivative instruments and hedge activities:
Balance at beginning of year
Reclassification adjustments (net of tax benefit (expense) of $8.5 million in 2022,
$8.7 million in 2021 and ($1.8) million in 2020)
Other comprehensive income (loss) recognized during the period (net of tax
benefit (expense) of ($19.1) million in 2022, ($1.2) million in 2021 and $1.0
million in 2020)
Balance at end of year
Currency translation adjustments:
Balance at beginning of year
Other comprehensive income (loss) recognized during the period (net of tax
benefit (expense) of ($4.7) million in 2022, ($4.1) million in 2021 and $3.8
million in 2020)
Balance at end of year
2022
2021
2020
$
(199.4) $
(276.9) $
(217.6)
4.0
7.1
14.3
99.7
(95.7) $
70.4
(199.4) $
(73.6)
(276.9)
(18.6) $
12.6 $
(35.3)
(36.0)
9.8
7.5
87.3
33.4 $
4.8
(18.6) $
(4.7)
12.6
$
$
$
$
(552.2) $
(440.8) $
(564.9)
(190.6)
(742.8) $
(111.4)
(552.2) $
124.1
(440.8)
$
For the years ended December 31, 2022, 2021 and 2020, other comprehensive income (loss) related to currency translation
adjustments includes pretax losses related to intercompany transactions for which settlement is not planned or anticipated in the
foreseeable future of $2.6 million, $0.4 million and $0.6 million, respectively.
For the years ended December 31, 2022, 2021 and 2020, other comprehensive income (loss) related to currency translation
adjustments also includes net investment hedge gains (losses) of $25.3 million, $17.9 million and ($18.3) million, respectively.
Redeemable Noncontrolling Interest
In accordance with GAAP, the Company records redeemable noncontrolling interests at the greater of (1) the initial carrying
amount adjusted for the noncontrolling interest holder's share of total comprehensive income or loss and dividends
("noncontrolling interest carrying value") or (2) the redemption value as of and based on conditions existing as of the reporting
date. Required redeemable noncontrolling interest adjustments are recorded as an increase to redeemable noncontrolling
interests, with an offsetting adjustment to retained earnings. Redeemable noncontrolling interest is classified in mezzanine
equity.
In 2020, the noncontrolling interest holder in Shanghai Lear STEC Automotive Parts Co., Ltd. exercised its option requiring the
Company to purchase its 45% redeemable noncontrolling interest. The transaction was completed in the fourth quarter of 2020
for $95.5 million plus undistributed retained earnings of $26.8 million. These amounts are reflected in cash flows from
financing activities in the accompanying statement of cash flows for the year ended December 31, 2020.
Noncontrolling Interests
In 2021, the Company sold a 49% equity interest in its wholly owned consolidated subsidiary, Shenyang Lear Jinbei
Automotive Systems Co., Ltd. ("Shenyang Lear"), for $36.2 million. The Company continues to control Shenyang Lear, and as
a result, the operating results and cash flows of Shenyang Lear continue to be included in the Company's consolidated financial
statements. Noncontrolling interest of $7.6 million was recorded in conjunction with the transaction. The difference between the
consideration paid and the carrying value of the noncontrolling interest recorded is reflected in additional paid-in capital in the
accompanying consolidated balance sheets. The proceeds from the sale are classified within cash flows used in financing
activities in the accompanying consolidated statement of cash flows for the year ended December 31, 2021.
91
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
(13) Stock-Based Compensation
As of November 9, 2009, the Company adopted the Lear Corporation 2009 Long-Term Stock Incentive Plan (as amended, the
"2009 LTSIP"). The 2009 LTSIP reserved 11,815,748 shares of common stock for issuance under stock option, restricted stock,
restricted stock unit, restricted unit, performance share, performance unit and stock appreciation right awards. As of May 16,
2019, the Company adopted the Lear Corporation 2019 Long-Term Stock Incentive Plan (the "2019 LTSIP"), after which no
awards will be issued under the 2009 LTSIP. The 2019 LTSIP reserves 2,526,858 shares of common stock plus shares of
common stock awarded under the 2009 LTSIP that are cancelled subsequent to May 16, 2019, for issuance under stock option,
restricted stock, restricted stock unit, restricted unit, performance share, performance unit and stock appreciation right awards.
In addition, the Company adopted the Lear Corporation 2019 Inducement Grant Plan ("Inducement Plan") as of April 17, 2019,
in conjunction with the Xevo acquisition. The Inducement Plan reserved 146,516 shares of common stock for issuance under
restricted stock and restricted stock unit awards, of which 145,202 awards were granted on April 17, 2019. The remaining
shares under the Inducement Plan will not be awarded.
Under the 2009 LTSIP, the 2019 LTSIP and the Inducement Plan, the Company has granted restricted stock units, performance
shares and stock options to certain of its employees, all of which generally vest in one to three years following the grant date.
For the years ended December 31, 2022, 2021 and 2020, the Company recognized compensation expense related to these
awards of $50.3 million, $58.7 million and $39.0 million, respectively. Unrecognized compensation expense related to these
awards of $58.7 million will be recognized over the next 1.6 years on a weighted average basis. In accordance with the
provisions of the awards, the Company withholds shares from the settlement of such awards to cover minimum statutory tax
withholding requirements. The withheld shares are classified as common stock held in treasury in the accompanying
consolidated balance sheets as of December 31, 2022 and 2021.
A summary of restricted stock units, performance shares and stock options for the year ended December 31, 2022, is shown
below:
Outstanding as of December 31, 2021
567,891
Restricted
Stock Units
Weighted
Average Grant
Date
Fair Value
$129.58
Performance
Shares
780,544
Weighted
Average Grant
Date
Fair Value
$156.56
Weighted
Average Grant
Date
Fair Value
$32.65
Stock Options
202,702
Granted
Distributed (vested)
Cancelled
189,213
$164.57
244,717
$196.83
(242,307)
(20,336)
(104,551)
(194,225)
—
—
—
Outstanding as of December 31, 2022 (1)
494,461
$145.64
726,485
$201.83
202,702
$32.65
Vested or expected to vest as of
December 31, 2022
494,461
435,217
202,702
(1) Outstanding performance shares are reflected at the maximum possible payout that may be earned during the relevant performance periods.
The grant date fair value of restricted stock units is based on the share price on the grant date. The weighted average grant date
fair value of restricted stock units granted in 2021 and 2020 was $165.28 and $129.40, respectively. The grant date fair value of
performance shares is based on the share price on the grant date or a Monte Carlo simulation. The weighted average grant date
fair value of performance shares granted in 2021 and 2020 was $188.11 and $147.53, respectively. The grant date fair value of
stock options is based on a Black-Scholes model. The grant date fair value of options granted in 2021 and 2020 was $35.33 and
$30.32, respectively.
(14) Commitments and Contingencies
Legal and Other Contingencies
As of December 31, 2022 and 2021, the Company had recorded reserves for pending legal disputes, including commercial
disputes, product liability claims and other legal matters, of $15.9 million and $19.5 million, respectively. Such reserves reflect
amounts recognized in accordance with GAAP and typically exclude the cost of legal representation. Product warranty and
recall reserves are recorded separately from legal reserves, as described below.
92
Table of Contents
Commercial Disputes
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company is involved from time to time in legal proceedings and claims, including, without limitation, commercial or
contractual disputes with its customers, suppliers and competitors. These disputes vary in nature and are usually resolved by
negotiations between the parties.
Product Warranty and Recall Matters
In the event that use of the Company's products results in, or is alleged to result in, bodily injury and/or property damage or
other losses, the Company may be subject to product liability lawsuits and other claims. Such lawsuits generally seek
compensatory damages, punitive damages and attorneys' fees and costs. In addition, if any of the Company's products are, or
are alleged to be, defective, the Company may be required or requested by its customers to participate in a recall or other
corrective action involving such products. Certain of the Company's customers have asserted claims against the Company for
costs related to recalls or other corrective actions involving its products. The Company can provide no assurances that it will
not experience material claims in the future or that it will not incur significant costs to defend such claims.
To a lesser extent, the Company is a party to agreements with certain of its customers, whereby these customers may pursue
claims against the Company for contribution of all or a portion of the amounts sought in connection with product warranty and
recall matters.
In certain instances, allegedly defective products may be supplied by the Company's suppliers. The Company may seek
recovery from its suppliers of materials or services included within the Company's products that are associated with product
liability claims and product warranty and recall matters. The Company carries insurance for certain legal matters, including
product liability claims, but such coverage may be limited. The Company does not maintain insurance for product warranty or
recall matters.
The Company records product warranty and recall reserves when liability is probable and related amounts are reasonably
estimable.
A summary of the changes in reserves for product warranty and recall matters for each of the periods in the two years ended
December 31, 2022, is shown below (in millions):
Balance as of January 1, 2021
Expense, net (including changes in estimates)
Settlements
Foreign currency translation and other
Balance as of January 1, 2022
Expense, net (including changes in estimates)
Settlements
Foreign currency translation and other
Balance as of December 31, 2022
Environmental Matters
$
$
48.7
12.7
(13.7)
(1.7)
46.0
6.6
(19.6)
(2.6)
30.4
The Company is subject to local, state, federal and foreign laws, regulations and ordinances, which govern activities or
operations that may have adverse environmental effects and which impose liability for clean-up costs resulting from past spills,
disposals or other releases of hazardous wastes and environmental compliance. The Company's policy is to comply with all
applicable environmental laws and to maintain an environmental management program based on ISO 14001 to ensure
compliance with this standard. However, the Company currently is, has been and in the future may become the subject of
formal or informal enforcement actions or procedures.
As of December 31, 2022 and 2021, the Company had recorded environmental reserves of $7.9 million and $8.0 million,
respectively. The Company does not believe that the environmental liabilities associated with its current and former properties
will have a material adverse impact on its business, financial condition, results of operations or cash flows; however, no
assurances can be given in this regard.
Other Matters
The Company is involved from time to time in various other legal proceedings and claims, including, without limitation,
intellectual property matters, tax claims and employment matters. Although the outcome of any legal matter cannot be predicted
93
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
with certainty, the Company does not believe that any of the other legal proceedings or claims in which the Company is
currently involved, either individually or in the aggregate, will have a material adverse impact on its business, financial
condition, results of operations or cash flows. However, no assurances can be given in this regard.
Although the Company records reserves for legal disputes, product warranty and recall matters and environmental and other
matters in accordance with GAAP, the ultimate outcomes of these matters are inherently uncertain. Actual results may differ
significantly from current estimates.
Insurance Recoveries
The Company incurred losses and incremental costs related to the destruction of assets caused by a typhoon in the Philippines
in December 2021. In 2022, the Company reached an installment settlement for the recovery of such costs under applicable
insurance policies. Anticipated proceeds from insurance recoveries related to losses and incremental costs that have been
incurred ("loss recoveries") are recognized when receipt is probable. Anticipated proceeds from insurance recoveries in excess
of the net book value of destroyed property, plant and equipment ("insurance gain contingencies") are recognized when all
contingencies related to the claim have been resolved. Loss recoveries related to the destruction of inventory and incremental
costs are included in costs of sales and loss recoveries and insurance gain contingencies related to the destruction of property,
plant and equipment are included in other expense, net. Cash proceeds related to the destruction of inventory and incremental
costs are included in cash flows from operating activities and cash proceeds related to the destruction of property, plant and
equipment are included in cash flows from investing activities.
The Company incurred cumulative losses and incremental costs of $26.5 million related to the typhoon, of which $13.3 million
was incurred in 2022. In 2022, the Company recognized insurance recoveries of $14.7 million, of which $13.3 million is
recognized in cost of sales and $1.4 million is recognized in other expense, net. In 2022, the Company received cumulative cash
proceeds of $13.3 million, of which $12.8 million is reflected in cash flows from operating activities and $0.5 million is
reflected in cash flows from investing activities in the accompanying statement of cash flows.
Employees
Approximately 48% of the Company's employees are members of industrial trade unions and are employed under the terms of
various labor agreements. Labor agreements covering approximately 74% of the Company's global unionized workforce of
approximately 81,300 employees, including labor agreements in the United States and Canada covering approximately 2% of
the Company's global unionized workforce, are scheduled to expire in 2023. Management does not anticipate any significant
difficulties with respect to the renewal of these agreements.
(15) Segment Reporting
A summary of revenues from external customers and other financial information by reportable operating segment is shown
below (in millions):
Revenues from external customers
Segment earnings (1)
Depreciation and amortization
Capital expenditures
Total assets
Revenues from external customers
Segment earnings (1)
Depreciation and amortization
Capital expenditures
Total assets
Year Ended December 31, 2022
Seating
E-Systems
Other
Consolidated
$
15,711.2 $
893.0
5,180.3 $
74.4
— $
(313.1)
20,891.5
654.3
369.5
369.4
7,897.4
188.2
241.3
3,684.7
18.8
27.5
576.5
638.2
2,180.9
13,763.0
Year Ended December 31, 2021
Seating
E-Systems
Other
Consolidated
$
14,411.4 $
4,851.7 $
— $
19,263.1
851.3
362.6
340.7
121.2
195.7
217.2
(297.1)
15.6
27.2
675.4
573.9
585.1
7,414.0
3,584.8
2,353.6
13,352.4
94
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Revenues from external customers
Segment earnings (1)
Depreciation and amortization
Capital expenditures
Year Ended December 31, 2020
Seating
E-Systems
Other
Consolidated
$
12,712.7 $
4,332.8 $
— $
17,045.5
590.5
348.1
257.2
98.1
176.6
179.3
(234.5)
15.2
15.8
454.1
539.9
452.3
(1) For a definition of segment earnings, see Note 3 , "Summary of Significant Accounting Policies — Segment Reporting."
A reconciliation of segment earnings to consolidated income before provision for income taxes and equity in net income of
affiliates is shown below (in millions):
For the year ended December 31,
Segment earnings
2022
2021
2020
$
967.4 $
972.5 $
688.6
Corporate and regional headquarters and elimination of intercompany
activity ("Other")
Consolidated income before interest, other expense, provision for income
taxes and equity in net income of affiliates
Interest expense
Other expense, net
(313.1)
(297.1)
(234.5)
654.3
98.6
46.4
675.4
91.8
0.1
454.1
99.6
55.2
Consolidated income before provision for income taxes and equity in net
income of affiliates
$
509.3 $
583.5 $
299.3
Revenues from external customers and tangible long-lived assets for each of the geographic areas in which the Company
operates is shown below (in millions):
For the year ended December 31,
Revenues from external customers
United States
Mexico
China
Germany
Other countries
Total
December 31,
Tangible long-lived assets (1)
United States
Mexico
China
Germany
Other countries
Total
(1) Tangible long-lived assets include property, plant and equipment and right-of-use assets.
2022
2021
2020
4,751.6 $
3,182.7
2,976.1
1,211.0
8,770.1
20,891.5 $
4,410.7 $
2,465.8
3,018.1
1,309.9
8,058.6
19,263.1 $
3,599.1
2,528.4
2,592.7
1,288.3
7,037.0
17,045.5
2022
2021
688.3 $
735.5
463.8
186.8
1,481.4
3,555.8 $
593.0
691.6
460.8
189.2
1,413.4
3,348.0
$
$
$
$
95
Table of Contents
The following is a summary of the percentage of revenues from major customers:
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
For the year ended December 31,
General Motors
Ford
Mercedes-Benz
Volkswagen
Stellantis
(16) Financial Instruments
Debt Instruments
2022
20.2%
13.5%
11.3%
10.8%
10.3%
2021
18.2%
13.5%
11.2%
11.8%
10.9%
2020
18.7%
13.5%
11.9%
11.7%
11.2%
The carrying values of the Notes vary from their fair values. The fair values of the Notes were determined by reference to the
quoted market prices of these securities (Level 2 input based on the GAAP fair value hierarchy). The estimated fair value, as
well as the carrying value, of the Company's debt instruments are shown below (in millions):
December 31,
Estimated aggregate fair value (1)
Aggregate carrying value (1) (2)
2022
2021
$
2,142.3 $
2,868.6
2,600.0
2,600.0
(1) Excludes "other" debt.
(2) Excludes the impact of unamortized debt issuance costs and unamortized original issue premium (discount).
Cash, Cash Equivalents and Restricted Cash
The Company has cash on deposit that is legally restricted as to use or withdrawal. A reconciliation of cash and cash
equivalents reported on the accompanying consolidated balance sheets to cash, cash equivalents and restricted cash reported on
the consolidated statements of cash flows is shown below (in millions):
December 31,
Balance sheet — cash and cash equivalents
Restricted cash included in other current assets
Restricted cash included in other long-term assets
2022
2021
2020
$ 1,114.9 $ 1,318.3 $ 1,306.7
0.3
2.2
1.4
1.6
5.1
2.7
Statement of cash flows — cash, cash equivalents and restricted cash
$ 1,117.4 $ 1,321.3 $ 1,314.5
Marketable Equity Securities
Marketable equity securities, which the Company accounts for under the fair value option, are included in the accompanying
consolidated balance sheets as shown below (in millions):
December 31,
Other current assets
Other long-term assets
2022
2021
$
$
3.6 $
53.6
57.2 $
3.5
58.8
62.3
Unrealized gains and losses arising from changes in the fair value of the marketable equity securities are recognized in other
expense, net in the accompanying consolidated statements of income. The fair value of the marketable equity securities is
determined by reference to quoted market prices in active markets (Level 1 input based on the GAAP fair value hierarchy).
Equity Securities Without Readily Determinable Fair Values
As of December 31, 2022 and 2021, investments in equity securities without readily determinable fair values of $18.2 million
and $15.4 million, respectively, are included in other long-term assets in the accompanying consolidated balance sheets. Such
investments are valued at cost, less cumulative impairments and adjusted for changes resulting from observable, orderly
transactions for identical or similar securities. For the years ended December 31, 2021 and 2020, the Company recognized
96
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
impairment charges of $1.0 million and $4.0 million, respectively, and investments in equity securities without readily
determinable fair values have been reduced for cumulative impairments of $10.0 million as of December 31, 2022 and 2021.
Derivative Instruments and Hedging Activities
Foreign Exchange
The Company uses forwards, swaps and other derivative contracts to reduce the effects of fluctuations in foreign exchange rates
on known foreign currency exposures. Gains and losses on the derivative instruments are intended to offset gains and losses on
the hedged transaction in an effort to reduce exposure to fluctuations in foreign exchange rates. The principal currencies hedged
by the Company include the Mexican peso, various European currencies, the Chinese renminbi, the Philippine peso and the
Japanese yen.
Foreign currency derivative contracts not designated as hedging instruments consist principally of hedges of cash transactions,
intercompany loans and certain other balance sheet exposures.
Net Investment Hedges
The Company uses cross-currency interest rate swaps which are designated as net investment hedges of the foreign currency
rate exposure of its investment in certain Euro-denominated subsidiaries. Contra interest expense on net investment hedges was
$4.6 million, $6.5 million and $6.5 million for the years ended December 31, 2022, 2021 and 2020, respectively, and is
included in interest expense in the accompanying consolidated statements of income.
Balance Sheet Classification
The notional amount, estimated aggregate fair value and related balance sheet classification of the Company's foreign currency
and net investment hedge contracts are shown below (in millions, except for maturities):
December 31,
Fair value of foreign currency contracts designated as cash flow hedges:
2022
2021
Other current assets
Other long-term assets
Other current liabilities
Other long-term liabilities
Notional amount
Outstanding maturities in months, not to exceed
Fair value of derivatives designated as net investment hedges:
Other long-term assets
Other current liabilities
Other long-term liabilities
Notional amount
Outstanding maturities in months, not to exceed
Fair value of foreign currency contracts not designated as hedge instruments:
Other current assets
Other current liabilities
Notional amount
Outstanding maturities in months, not to exceed
Total fair value
Total notional amount
97
$
63.4 $
10.3
(6.7)
(0.2)
66.8
19.4
0.1
(10.1)
(2.8)
6.6
$ 1,546.9 $ 1,077.6
23
24
$
$
4.8 $
—
—
4.8
150.0 $
39
—
(3.2)
(1.6)
(4.8)
300.0
33
$
9.5 $
(13.4)
(3.9)
758.6 $
7
67.7 $
2.2
(3.3)
(1.1)
445.5
12
0.7
$
$ 2,455.5 $ 1,823.1
$
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
Accumulated Other Comprehensive Loss — Derivative Instruments and Hedge Activities
Pretax amounts related to foreign currency contracts and net investment hedges that were recognized in and reclassified from
accumulated other comprehensive loss are shown below (in millions):
For the year ended December 31,
Gains (losses) recognized in accumulated other comprehensive loss:
Foreign currency contracts
Net investment hedges
(Gains) losses reclassified from accumulated other comprehensive loss to:
Net sales
Cost of sales
Interest expense
Other expense, net
Comprehensive income (loss)
2022
2021
2020
$
106.4 $
25.3
131.7
6.0 $
17.9
23.9
(12.4)
(33.8)
2.4
—
(43.8)
87.9 $
(4.4)
(42.7)
2.4
—
(44.7)
(20.8) $
$
(5.7)
(18.3)
(24.0)
(0.6)
7.6
2.4
(0.1)
9.3
(14.7)
As of December 31, 2022 and 2021, pretax net gains (losses) of $71.8 million and ($16.1) million, respectively, related to the
Company's derivative instruments and hedge activities were recorded in accumulated other comprehensive loss.
During the next twelve month period, net gains (losses) expected to be reclassified into earnings are shown below (in millions):
Foreign currency contracts
Interest rate swap contracts
Total
$
$
56.7
(2.4)
54.3
Such gains and losses will be reclassified at the time that the underlying hedged transactions are realized.
For the years ended December 31, 2022, 2021 and 2020, the Company recognized tax benefit (expense) of ($10.6) million, $7.5
million and ($0.8) million, respectively, in other comprehensive income related to its derivative instruments and hedge
activities.
Fair Value Measurements
GAAP provides that fair value is an exit price, defined as a market-based measurement that represents the amount that would be
received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. Fair value
measurements are based on one or more of the following three valuation techniques:
Market:
Income:
This approach uses prices and other relevant information generated by market transactions involving identical
or comparable assets or liabilities.
This approach uses valuation techniques to convert future amounts to a single present value amount based on
current market expectations.
Cost:
This approach is based on the amount that would be required to replace the service capacity of an asset
(replacement cost).
Further, GAAP prioritizes the inputs and assumptions used in the valuation techniques described above into a three-tier fair
value hierarchy as follows:
Level 1:
Level 2:
Level 3:
Observable inputs, such as quoted market prices in active markets for identical assets or liabilities that are
accessible at the measurement date.
Inputs, other than quoted market prices included in Level 1, that are observable either directly or indirectly for
the asset or liability.
Unobservable inputs that reflect the entity's own assumptions about the exit price of the asset or liability.
Unobservable inputs may be used if there is little or no market data for the asset or liability at the measurement
date.
98
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The Company discloses fair value measurements and the related valuation techniques and fair value hierarchy level for its
assets and liabilities that are measured or disclosed at fair value.
Items Measured at Fair Value on a Recurring Basis
Fair value measurements and the related valuation techniques and fair value hierarchy level for the Company's assets and
liabilities measured at fair value on a recurring basis as of December 31, 2022 and 2021, are shown below (in millions):
Frequency
Asset
(Liability)
Valuation
Technique
Level 1
Level 2
Level 3
December 31, 2022
Foreign currency contracts, net
Recurring
$
62.9 Market / Income $
— $
62.9 $
Net investment hedges
Marketable equity securities
Recurring
Recurring
4.8 Market / Income
57.2
Market
—
57.2
4.8
—
—
—
—
Frequency
Asset
(Liability)
Valuation
Technique
Level 1
Level 2
Level 3
December 31, 2021
Foreign currency contracts, net
Recurring
$
5.5 Market / Income $
— $
5.5 $
Net investment hedges
Marketable equity securities
Recurring
Recurring
(4.8) Market / Income
62.3
Market
—
62.3
(4.8)
—
—
—
—
The Company determines the fair value of its derivative contracts using quoted market prices to calculate the forward values
and then discounts such forward values to the present value. The discount rates used are based on quoted bank deposit or swap
interest rates. If a derivative contract is in a net liability position, the Company adjusts these discount rates, if required, by an
estimate of the credit spread that would be applied by market participants purchasing these contracts from the Company's
counterparties. If an estimate of the credit spread is required, the Company uses significant assumptions and factors other than
quoted market rates, which would result in the classification of its derivative liabilities within Level 3 of the fair value
hierarchy. As of December 31, 2022 and 2021, there were no derivative contracts that were classified within Level 3 of the fair
value hierarchy. In addition, there were no transfers in or out of Level 3 of the fair value hierarchy during 2022 and 2021.
For further information on fair value measurements and the Company's defined benefit pension plan assets, see Note 10,
"Pension and Other Postretirement Benefit Plans."
Items Measured at Fair Value on a Non-Recurring Basis
The Company measures certain assets and liabilities at fair value on a non-recurring basis, which are not included in the table
above. As these non-recurring fair value measurements are generally determined using unobservable inputs, these fair value
measurements are classified within Level 3 of the fair value hierarchy.
In 2022 and 2020, the Company completed quantitative goodwill impairment analyses for selected reporting units (Note 3,
"Summary of Significant Accounting Policies — Impairment of Goodwill"). The Level 3 fair value estimate of the reporting
units was based on a third-party valuation and/or management's estimates, using a combination of the discounted cash flow
method and/or guideline public company method.
In 2022, as a result of the acquisition of Kongsberg ICS (Note 4, "Acquisition of Kongsberg ICS"), Level 3 fair value estimates
related to property, plant and equipment of $124.1 million, right-of-use assets of $34.1 million and developed technology
intangible assets of $11.1 million are recorded in the accompanying consolidated balance sheet as of December 31, 2022. Fair
value estimates of property, plant and equipment were based on independent appraisals, giving consideration to the highest and
best use of the assets. Key assumptions used in the appraisals were based on a combination of market and cost approaches, as
appropriate. Fair value estimates of right-of-use assets were based on a market approach. Fair value estimates of developed
technology intangible asset were based on a relief from royalty approach.
In 2022 and 2021, the Company completed impairment assessments related to certain of its intangible assets resulting from
changes in the intended uses of such assets and recorded impairment charges of $8.9 million and $8.5 million, respectively. The
fair value estimate of the related asset group was based on management's estimates using a discounted cash flow method (Note
3, "Summary of Significant Accounting Policies — Impairment of Long-Lived Assets").
In 2022, the Company completed impairment assessments related to substantially all of its operating assets in Russia and
recorded charges of $19.4 million related to impairments of inventory, property, plant and equipment and right-of-use assets.
99
Table of Contents
Lear Corporation and Subsidiaries
Notes to Consolidated Financial Statements (continued)
The fair value estimates of the related assets were based on management's estimates using a discounted cash flow method (Note
2, "Current Operating Environment").
As of December 31, 2022 and 2021, there were no additional significant assets or liabilities measured at fair value on a non-
recurring basis.
(17) Accounting Pronouncements
The Company considers the applicability and impact of all Accounting Standards Updates ("ASU") issued by the Financial
Accounting Standards Board ("FASB"), as summarized below.
Pronouncements adopted in 2022:
Reference Rate Reform
The FASB issued ASU 2022-06, 2021-01 and 2020-04, "Reference Rate Reform (Topic 848)." The guidance provides
temporary optional expedients and exceptions to the current guidance on contract modifications and hedge accounting to ease
the financial reporting burdens related to the expected market transition from the London Interbank Offered Rate ("LIBOR")
and other interbank offered rates to alternative reference rates. The guidance was effective upon issuance and generally can be
applied to applicable contract modifications and hedge relationships prospectively through December 31, 2024. The adoption of
this guidance did not have a significant impact on the Company's financial statements.
Government Assistance
The FASB issued ASU 2021-10, "Disclosures by Business Entities about Government Assistance." The guidance, effective
January 1, 2022, requires disclosures about certain government assistance transactions. The adoption of this guidance did not
have a significant impact on the Company's financial statements.
Pronouncements effective after 2022:
Supplier Finance Programs
The FASB issued ASU 2022-04, "Liabilities - Supplier Finance Programs." The guidance requires disclosure of key terms of
supplier finance programs, including payment terms and assets pledged, amounts outstanding at end of period and applicable
balance sheet line item(s), and a rollforward of obligations. The guidance does not affect the existing recognition, measurement
or financial statement presentation of supplier finance program obligations. The guidance is effective January 1, 2023, with the
exception of rollforward information which is effective January 1, 2024. Early adoption is permitted. The adoption of this
guidance is not expected to have a significant impact on the Company's financial statements.
100
Table of Contents
LEAR CORPORATION AND SUBSIDIARIES
SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS
Balance
as of Beginning
of Period
Additions
Retirements
Other
Changes
Balance
as of End
of Period
For the year ended December 31, 2022
Valuation of accounts deducted from related
assets:
Allowance for doubtful accounts
Allowance for deferred tax assets
Total
$
$
35.5 $
12.0 $
(10.3) $
(1.9) $
406.9
41.4
(5.3)
(25.1)
442.4 $
53.4 $
(15.6) $
(27.0) $
35.3
417.9
453.2
Balance
as of Beginning
of Period
Additions
Retirements
Other
Changes
Balance
as of End
of Period
For the year ended December 31, 2021
Valuation of accounts deducted from related
assets:
Allowance for doubtful accounts
Allowance for deferred tax assets
Total
$
$
35.3 $
8.2 $
(8.3) $
0.3 $
397.7
44.7
(17.7)
(17.8)
433.0 $
52.9 $
(26.0) $
(17.5) $
35.5
406.9
442.4
Balance
as of Beginning
of Period
Additions
Retirements
Other
Changes
Balance
as of End
of Period
For the year ended December 31, 2020
Valuation of accounts deducted from related
assets:
Allowance for doubtful accounts
Allowance for deferred tax assets
Total
$
$
36.0 $
7.0 $
(9.8) $
2.1 $
344.8
81.4
(43.5)
15.0
380.8 $
88.4 $
(53.3) $
17.1 $
35.3
397.7
433.0
101
Table of Contents
None.
ITEM 9 – CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON
ACCOUNTING AND FINANCIAL DISCLOSURE
(a) Disclosure Controls and Procedures
ITEM 9A – CONTROLS AND PROCEDURES
The Company has evaluated, under the supervision and with the participation of the Company's management, including
the Company's President and Chief Executive Officer along with the Company's Senior Vice President and Chief
Financial Officer, the effectiveness of the Company's disclosure controls and procedures (as defined in Rules 13a-15(e)
and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) as of the end of the period
covered by this Report. The Company's disclosure controls and procedures are designed to provide reasonable assurance
of achieving their objectives. Because of the inherent limitations in all control systems, no evaluation of controls can
provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected.
Based on the evaluation described above, the Company's President and Chief Executive Officer along with the Company's
Senior Vice President and Chief Financial Officer have concluded that the Company's disclosure controls and procedures
were effective to provide reasonable assurance that the desired control objectives were achieved as of the end of the
period covered by this Report.
(b) Management's Annual Report on Internal Control over Financial Reporting
The Company's management is responsible for establishing and maintaining adequate internal control over financial
reporting, as such term is defined in Exchange Act Rule 13a-15(f). Under the supervision and with the participation of the
Company's management, including the Company's President and Chief Executive Officer along with the Company's
Senior Vice President and Chief Financial Officer, the Company conducted an evaluation of the effectiveness of internal
control over financial reporting based on the Internal Control-Integrated Framework issued by the Committee of
Sponsoring Organizations of the Treadway Commission (2013 framework). In February 2022, the Company completed
the acquisition of substantially all of Kongsberg Automotive's Interior Comfort Systems business unit ("Kongsberg ICS")
and is currently integrating Kongsberg ICS into its operations, compliance programs and internal control processes.
Kongsberg ICS constituted approximately 2.8% of the Company's total assets as of December 31, 2022, including
goodwill and intangible assets recorded as part of the purchase price allocations, and approximately 1.2% of the
Company's net sales in the year ended December 31, 2022. Securities and Exchange Commission rules and regulations
allow companies to exclude acquisitions from their assessment of internal control over financial reporting during the first
year following an acquisition while integrating the acquired company. The Company has excluded the acquired operations
of Kongsberg ICS from its assessment of the Company's internal control over financial reporting as of December 31,
2022. Based on this evaluation, management concluded that the Company's internal control over financial reporting was
effective as of December 31, 2022.
(c) Attestation Report of the Registered Public Accounting Firm
The attestation report of the Company's independent registered public accounting firm regarding internal control over
financial reporting is set forth in Item 8, "Consolidated Financial Statements and Supplementary Data," under the caption
"Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting" and
incorporated herein by reference.
(d) Changes in Internal Control over Financial Reporting
There was no change in the Company's internal control over financial reporting that occurred during the fiscal quarter
ended December 31, 2022, that has materially affected, or is reasonably likely to materially affect, the Company's internal
control over financial reporting.
None.
ITEM 9B – OTHER INFORMATION
102
Table of Contents
ITEM 9C – DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS
Not applicable.
103
Table of Contents
PART III
ITEM 10 – DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
The information required by Item 10 regarding our directors and corporate governance matters is incorporated by reference
herein to the Proxy Statement sections entitled "Election of Directors" and "Directors and Corporate Governance." The
information required by Item 10 regarding our executive officers appears as a supplementary item following Item 4 under Part I
of this Report. The information required by Item 10 regarding compliance with section 16(a) of the Securities Exchange Act of
1934, as amended, is incorporated by reference herein to the Proxy Statement section entitled "Directors and Corporate
Governance — Section 16(a) Beneficial Ownership Reporting Compliance."
Code of Ethics
We have adopted a Code of Business Conduct and Ethics that applies to our executive officers, including our Principal
Executive Officer, our Principal Financial Officer and our Principal Accounting Officer, which can be found on our website at
http://www.lear.com. We will post any amendment to or waiver from the provisions of the Code of Business Conduct and
Ethics that applies to the executive officers above on the same website and will provide it to stockholders free of charge upon
written request by contacting Lear Corporation at 21557 Telegraph Road, Southfield, Michigan 48033, Attention: Investor
Relations.
ITEM 11 – EXECUTIVE COMPENSATION
The information required by Item 11 is incorporated by reference herein to the Proxy Statement sections entitled "Directors and
Corporate Governance — Director Compensation," "Compensation Discussion and Analysis," "Executive Compensation,"
"Compensation Committee Interlocks and Insider Participation" and "Compensation Committee Report." Notwithstanding
anything indicating the contrary set forth in this Report, the "Compensation Committee Report" section of the Proxy Statement
shall be deemed to be "furnished" not "filed" for purposes of the Securities Exchange Act of 1934, as amended.
ITEM 12 – SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND
RELATED STOCKHOLDER MATTERS
Except as set forth herein, the information required by Item 12 is incorporated by reference herein to the Proxy Statement
section entitled "Directors and Corporate Governance — Security Ownership of Certain Beneficial Owners, Directors and
Management."
Equity Compensation Plan Information
As of December 31, 2022
Equity compensation plans approved by
security holders
Equity compensation plans not approved by
security holders
Total
Number of securities to be
issued upon exercise of
outstanding options,
warrants and rights
(a)
Weighted average
exercise price of
outstanding options,
warrants and rights
(b)
Number of securities
available for future
issuance under equity
compensation plans
(excluding securities
reflected in column (a))
(c)
1,478,152 (1)
$
20.32 (2)
—
1,478,152
$
—
20.32
1,135,253
—
1,135,253
(1) Includes 494,461 of outstanding restricted stock units, 780,989 of outstanding performance shares and 202,702 of outstanding stock options. Outstanding
performance shares are reflected at the maximum possible payout that may be earned during the relevant performance periods.
(2) Reflects outstanding restricted stock units and performance shares at a weighted average price of zero. Reflects outstanding stock options at a weighted
average exercise price of $148.16.
104
Table of Contents
ITEM 13 – CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by Item 13 is incorporated by reference herein to the Proxy Statement sections entitled "Certain
Relationships and Related Party Transactions" and "Directors and Corporate Governance — Independence of Directors."
ITEM 14 – PRINCIPAL ACCOUNTING FEES AND SERVICES
The information required by Item 14 is incorporated by reference herein to the Proxy Statement section entitled "Fees of
Independent Accountants."
PART IV
ITEM 15 – EXHIBITS AND FINANCIAL STATEMENT SCHEDULE
The following documents are filed as part of this Form 10-K.
(a) 1. Consolidated Financial Statements:
Reports of Ernst & Young LLP, Independent Registered Public Accounting Firm (PCAOB ID: 42)
Consolidated Balance Sheets as of December 31, 2022 and 2021
Consolidated Statements of Income for the years ended December 31, 2022, 2021 and 2020
Consolidated Statements of Comprehensive Income for the years ended December 31, 2022, 2021 and 2020
Consolidated Statements of Equity for the years ended December 31, 2022, 2021 and 2020
Consolidated Statements of Cash Flows for the years ended December 31, 2022, 2021 and 2020
Notes to Consolidated Financial Statements
2.
Financial Statement Schedule:
Schedule II — Valuation and Qualifying Accounts
All other financial statement schedules are omitted because such schedules are not required or the information
required has been presented in the aforementioned financial statements.
3.
The exhibits listed on the "Index to Exhibits" are filed with this Form 10-K or incorporated by reference as set forth
below.
(b) The exhibits listed on the "Index to Exhibits" are filed with this Form 10-K or incorporated by reference as set forth
below.
(c) Additional Financial Statement Schedules
None.
None.
ITEM 16 – FORM 10-K Summary
105
Table of Contents
Exhibit
Number
3.1
3.2
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
Index to Exhibits
Exhibit Name
Amended and Restated Certificate of Incorporation of the Company (incorporated by reference to
Exhibit 3.1 to the Company's Current Report on Form 8-K filed on November 9, 2009).
Amended and Restated Bylaws of the Company (incorporated by reference to Exhibit 3.2 to the
Company's Current Report on Form 8-K filed on November 9, 2009).
Indenture, dated August 17, 2017, among the Company and U.S. Bank National Association, as
Trustee (incorporated by reference to Exhibit 4.1 to the Company's Current Report on Form 8-K
filed on August 17, 2017).
First Supplemental Indenture, dated August 17, 2017, among the Company and U.S. Bank
National Association, as Trustee (incorporated by reference to Exhibit 4.2 to the Company's
Current Report on Form 8-K filed on August 17, 2017).
Second Supplemental Indenture, dated May 1, 2019, among the Company and U.S. Bank National
Association, as Trustee (incorporated by reference to Exhibit 4.1 to the Company's Current Report
on Form 8-K filed on May 1, 2019).
Third Supplemental Indenture, dated May 1, 2019, among the Company and U.S. Bank National
Association, as Trustee (incorporated by reference to Exhibit 4.2 to the Company's Current Report
on Form 8-K filed on May 1, 2019).
Fourth Supplemental Indenture, dated February 24, 2020, among the Company and U.S. Bank
National Association, as Trustee (incorporated by reference to Exhibit 4.1 to the Company's
Current Report on Form 8-K filed on February 24, 2020).
Indenture, dated November 8. 2021, between the Company and U.S. Bank National Association,
as Trustee (incorporated by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-
K filed on November 8, 2021).
First Supplemental Indenture, dated November 8, 2021, between the Company and U.S. Bank
National Association, as Trustee (incorporated by reference to Exhibit 4.2 to the Company’s
Current Report on Form 8-K filed on November 8, 2021).
Second Supplemental Indenture, dated November 28, 2021, between the Company and U.S. Bank
National Association, as Trustee (incorporated by reference to Exhibit 4.3 to the Company's
Current Report on Form 8-K filed on November 8, 2021).
*
*
*
*
*
*
*
*
Description of Lear Corporation's securities (incorporated by reference to Exhibit 4.8 to the
Company’s Annual Report on Form 10-K for the year ended December 31, 2019).
Lear Corporation 2009 Long-Term Stock Incentive Plan, amended and restated effective
January 1, 2014 (incorporated by reference to Exhibit 10.2 to the Company’s Annual Report on
Form 10-K for the year ended December 31, 2013).
Lear Corporation Pension Equalization Program, as amended through August 15, 2003
(incorporated by reference to Exhibit 10.37 to the Company’s Annual Report on Form 10-K for
the year ended December 31, 2004).
First Amendment to the Lear Corporation Pension Equalization Program, dated as of December
21, 2006 (incorporated by reference to Exhibit 10.45 to the Company’s Annual Report on Form
10-K for the year ended December 31, 2006).
Second Amendment to the Lear Corporation Pension Equalization Program, dated as of May 9,
2007 (incorporated by reference to Exhibit 10.49 to the Company’s Annual Report on Form 10-K
for the year ended December 31, 2007).
Third Amendment to the Lear Corporation Pension Equalization Program, effective as of
December 18, 2007 (incorporated by reference to Exhibit 10.1 to the Company’s Current Report
on Form 8-K filed on December 19, 2007).
Lear Corporation Outside Directors Compensation Plan, amended and restated effective January 1,
2016 (incorporated by reference to Exhibit 10.7 to the Company’s Annual Report on Form 10-K
for the year ended December 31, 2015).
Lear Corporation Outside Directors Compensation Plan - Form of Cash Retainer Deferral Election,
effective as of September 13, 2017 (incorporated by reference to Exhibit 10.4 to the Company’s
Quarterly Report on Form 10-Q for the quarter ended September 30, 2017).
Form of 2019 Performance Share Terms and Conditions under the Lear Corporation 2009 Long-
Term Stock Incentive Plan (incorporated by reference to Exhibit 10.3 to the Company’s Quarterly
Report on Form 10-Q for the quarter ended March 30, 2019).
106
Table of Contents
Exhibit
Number
10.9
10.10
10.11
10.12
10.13
10.14
10.15
10.16
10.17
10.18
10.19
10.20
10.21
10.22
Index to Exhibits
Exhibit Name
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Form of 2019 Restricted Stock Unit Terms and Conditions under the Lear Corporation 2009 Long-
Term Stock Incentive Plan (incorporated by reference to Exhibit 10.4 to the Company’s Quarterly
Report on Form 10-Q for the quarter ended March 30, 2019).
Form of 2018 Restricted Stock Unit "Career Shares" Award Agreement under the Lear
Corporation 2009 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 10.9 to
the Company’s Annual Report on Form 10-K for the year ended December 31, 2017).
Form of 2019 Restricted Stock Unit "Career Shares” Award Agreement under the Lear
Corporation 2019 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 10.11 to
the Company’s Annual Report on Form 10-K for the year ended December 31, 2019).
Lear Corporation Salaried Retirement Restoration Program (f/k/a Lear Corporation PSP Excess
Plan), amended and restated effective December 29, 2017 (incorporated by reference to Exhibit
10.13 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2017).
First Amendment to the Lear Corporation Salaried Retirement Restoration Program (amended and
restated effective December 29, 2017) effective as of November 18, 2020 (incorporated by
reference to Exhibit 10.13 to the Company's Annual Report on Form 10-K for the year ended
December 31, 2021).
Form of 2016 Restricted Stock Unit "Career Shares" Award Agreement under the Lear
Corporation 2009 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 10.14 to
the Company’s Annual Report on Form 10-K for the year ended December 31, 2015).
Form of 2018 Restricted Stock Unit Terms and Conditions under the Lear Corporation 2009 Long-
Term Stock Incentive Plan (incorporated by reference to Exhibit 10.15 to the Company’s Annual
Report on Form 10-K for the year ended December 31, 2017).
Lear Corporation Outside Directors Compensation Plan, amended and restated effective May 16,
2019 (incorporated by reference to Exhibit 10.4 to the Company’s Quarterly Report on Form 10-Q
for the quarter ended June 29, 2019).
Lear Corporation 2019 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 4.3
to the Company’s Registration Statement on Form S-8 filed on July 26, 2019).
Form of RSU Grant Deferral Election under the Lear Corporation Outside Directors Compensation
Plan, effective as of May 16, 2019 (incorporated by reference to Exhibit 10.5 to the Company’s
Quarterly Report on Form 10-Q for the quarter ended June 29, 2019).
Form of 2019 Restricted Stock Unit Terms and Conditions for Non-Employee Directors under the
Lear Corporation 2019 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 10.6
to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 29, 2019).
Form of 2020 Performance-Based Career Shares Award Agreement under the Lear Corporation
2019 Long-Term Stock Incentive Plan (incorporated by reference to Exhibit 10.1 to the
Company’s Current Report on Form 8-K filed November 19, 2020).
Form of 2021 Performance Share Terms and Conditions under the Lear Corporation 2019 Long-
Term Stock Incentive Plan (incorporated by reference to Exhibit 10.21 to the Company's Annual
Report on Form 10-K for the year ended December 31, 2021).
Second Amended and Restated Employment Agreement, dated February 14, 2018, between the
Company and Raymond E. Scott (incorporated by reference to Exhibit 10.1 to the Company’s
Current Report on Form 8-K filed on February 14, 2018).
10.23
* Waiver Agreement, dated April 10, 2020, between Lear Corporation and Raymond E. Scott
(incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended July 4, 2020).
10.24
*
Employment Agreement, dated September 27, 2019, between Lear Corporation and Jason M.
Cardew (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K
filed on October 1, 2019).
10.25
* Waiver Agreement, dated April 10, 2020, between Lear Corporation and Jason M. Cardew
(incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended July 4, 2020).
10.26
*
Amended and Restated Employment Agreement, dated September 21, 2022, between the
Company and Thomas A. DiDonato (incorporated by referenced to Exhibit 10.1 to the Company's
Quarterly Report on Form 10-Q for the quarter ended October 1, 2022).
107
Table of Contents
Exhibit
Number
10.27
Index to Exhibits
Exhibit Name
* Waiver Agreement, dated April 10, 2020, between Lear Corporation and Thomas A. DiDonato
(incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended July 4, 2020).
10.28
*
Employment Agreement, dated August 8, 2019, between Lear Corporation and Carl A. Esposito
(incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on
August 14, 2019).
10.29
* Waiver Agreement, dated April 10, 2020, between Lear Corporation and Carl A. Esposito
(incorporated by reference to Exhibit 10.4 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended July 4, 2020).
10.30
*
Second Amended and Restated Employment Agreement, dated March 1, 2018, between the
Company and Frank C. Orsini (incorporated by reference to Exhibit 10.1 to the Company’s
Current Report on Form 8-K filed on March 1, 2018).
10.31
* Waiver Agreement, dated April 10, 2020, between Lear Corporation and Frank C. Orsini
*
*
*
*
*
*
*
*
*
*
(incorporated by reference to Exhibit 10.5 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended July 4, 2020).
Amended and Restated Employment Agreement, dated September 21, 2022, between the
Company and Harry A. Kemp (incorporated by referenced to Exhibit 10.2 to the Company's
Quarterly Report on Form 10-Q for the quarter ended October 1, 2022).
Lear Corporation Annual Incentive Plan (Amended and Restated as of January 1, 2014)
(incorporated by reference to Appendix B to the Company’s definitive proxy statement on
Schedule 14A filed with the Securities and Exchange Commission on April 1, 2014).
First Amendment to the Lear Corporation 2009 Long-Term Stock Incentive Plan (amended and
restated as of January 1, 2014), effective as of January 1, 2017 (incorporated by reference to
Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended April 1,
2017).
Amended and Restated Credit Agreement, dated as of October 28, 2021, among the Company, the
foreign subsidiary borrowers from time to time party thereto, the lenders from time to time party
thereto, Barclays Bank PLC, Bank of America, N.A., Citibank N.A. and HSBC Bank USA,
National Association, as syndication agents, and JPMorgan Chase Bank, N.A., as administrative
agent (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K
filed on October 28, 2021).
First Amendment to the Lear Corporation Annual Incentive Plan (amended and restated as of
January 1, 2014), effective February 9, 2017 (incorporated by reference to Exhibit 10.2 to the
Company's Quarterly Report on Form 10-Q for the quarter ended April 1, 2017).
Second Amendment to the Lear Corporation Annual Incentive Plan (amended and restated January
1, 2014), effective December 19, 2019 (incorporated by reference to Exhibit 10.33 to the
Company’s Annual Report on Form 10-K for the year ended December 31, 2019).
Statement on Confidential Information, effective as of August 9, 2017 (incorporated by reference
to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended September
30, 2017).
First Amendment to the Lear Corporation Outside Directors Compensation Plan, effective
September 13, 2017 (incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report
on Form 10-Q for the quarter ended September 30, 2017).
Lear Corporation Outside Directors Compensation Plan - Form of Stock Grant Deferral Election,
effective as of September 13, 2017 (incorporated by reference to Exhibit 10.5 to the Company’s
Quarterly Report on Form 10-Q for the quarter ended September 30, 2017).
Anti-Hedging and Anti-Pledging Policy, amended and restated as of September 13, 2017
(incorporated by reference to Exhibit 10.6 to the Company’s Quarterly Report on Form 10-Q for
the quarter ended September 30, 2017).
Lear Corporation 2019 Inducement Grant Plan (incorporated by reference to Exhibit 4.3 to the
Company's Registration Statement on Form S-8 filed on April 17, 2019).
List of subsidiaries of the Company.
Consent of Ernst & Young LLP.
Rule 13a-14(a)/15d-14(a) Certification of Principal Executive Officer.
10.32
10.33
10.34
10.35
10.36
10.37
10.38
10.39
10.40
10.41
10.42
** 21.1
** 23.1
** 31.1
108
Table of Contents
Exhibit
Number
Exhibit Name
Index to Exhibits
** 31.2
** 32.1
** 32.2
99.1
Rule 13a-14(a)/15d-14(a) Certification of Principal Financial Officer.
Certification by Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant
to Section 906 of the Sarbanes-Oxley Act of 2002.
Certification by Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant
to Section 906 of the Sarbanes-Oxley Act of 2002.
Debtors' First Amended Joint Plan of Reorganization Under Chapter 11 of the Bankruptcy Code
dated September 18, 2009 (incorporated by reference to Exhibit 99.1 to the Company’s Current
Report on Form 8-K filed on November 5, 2009).
*** 101.INS
**** 101.SCH
**** 101.CAL
**** 101.LAB
**** 101.PRE
**** 101.DEF
*** 104
XBRL Instance Document.
XBRL Taxonomy Extension Schema Document.
XBRL Taxonomy Extension Calculation Linkbase Document.
XBRL Taxonomy Extension Label Linkbase Document.
XBRL Taxonomy Extension Presentation Linkbase Document.
XBRL Taxonomy Extension Definition Linkbase Document.
Cover Page Interactive Data File
______________________
*
**
***
****
Compensatory plan or arrangement.
Filed herewith.
The XBRL Instance Document and Cover Page Interactive Data File do not appear in the Interactive Data
File because their XBRL tags are embedded within the Inline XBRL document.
Submitted electronically with the Report.
109
Table of Contents
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the registrant has duly
caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized on February 9, 2023.
Signatures
Lear Corporation
By:
/s/ Raymond E. Scott
Raymond E. Scott
President and Chief Executive Officer and a Director (Principal Executive Officer)
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Report has been signed below by the
following persons on behalf of Lear Corporation and in the capacities indicated on February 9, 2023.
/s/ Raymond E. Scott
Raymond E. Scott
President and Chief Executive Officer and a Director
(Principal Executive Officer)
/s/ Jason M. Cardew
Jason M. Cardew
Senior Vice President and Chief Financial Officer
(Principal Financial Officer)
/s/ Amy A. Doyle
Amy A. Doyle
Vice President and Chief Accounting Officer
(Principal Accounting Officer)
/s/ Mei-Wei Cheng
Mei-Wei Cheng
a Director
/s/ Jonathan F. Foster
Jonathan F. Foster
a Director
/s/ Bradley M. Halverson
Bradley M. Halverson
a Director
/s/ Mary Lou Jepsen
Mary Lou Jepsen
a Director
/s/ Roger A. Krone
Roger A. Krone
a Director
/s/ Patricia L. Lewis
Patricia L. Lewis
a Director
/s/ Kathleen A. Ligocki
Kathleen A. Ligocki
a Director
/s/ Conrad L. Mallett, Jr.
Conrad L. Mallett, Jr.
a Director
/s/ Gregory C. Smith
Gregory C. Smith
Non-Executive Chairman of the Board of Directors and
a Director
110