UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM 10-K
(Mark One)
☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES AND EXCHANGE ACT OF 1934
for the fiscal year ended April 3, 2021
☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
for the transition period from __________to _________
Commission file number 333-124824
RBC BEARINGS INCORPORATED
(Exact name of registrant as specified in its charter)
Delaware
(State or other jurisdiction of
incorporation or organization)
One Tribology Center, Oxford, CT
(Address of principal executive offices)
95-4372080
(I.R.S. Employer
Identification No.)
06478
(Zip Code)
(203) 267-7001
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
Common Stock, par value $0.01 per share
Trading Symbol
ROLL
Name of Each Exchange on Which Registered
Nasdaq NMS
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☑ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☑
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or Section 15(d) of the Securities
Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been
subject to such filing requirements for the past 90 days. Yes ☑ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted and posted
pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was
required to submit such files). Yes ☑ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting
company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging
growth company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer ☑
Smaller reporting company ☐
Accelerated filer ☐
Non-accelerated filer ☐
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with
any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its
internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that
prepared or issued its audit report. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☑
The aggregate market value of the registrant’s Common Stock held by non-affiliates of the registrant on September 26, 2020 (based on the September 25,
2020 closing sales price of $119.31 of the registrant’s Common Stock, as reported by the Nasdaq National Market) was approximately $2,994,734,690.
Number of shares outstanding of the registrant’s Common Stock at May 14, 2021:
25,226,055 Shares of Common Stock, par value $0.01 per share.
Documents Incorporated by Reference:
Portions of the registrant’s proxy statement to be filed within 120 days of the close of the registrant’s fiscal year in connection with the registrant’s Annual
Meeting of Shareholders to be held September 8, 2021 are incorporated by reference into Part III of this Form 10-K.
TABLE OF CONTENTS
Business
Risk Factors
Unresolved Staff Comments
Properties
Legal Proceedings
Mine Safety Disclosures
Executive Officers of the Registrant
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Selected Financial Data
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures About Market Risk
Consolidated Financial Statements and Supplementary Data
Changes in and Disagreements With Accountants on Accounting and Financial Disclosure
Controls and Procedures
Other Information
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships, Related Transactions and Director Independence
Principal Accounting Fees and Services
Exhibits and Financial Statement Schedules
PART I
Item 1
Item 1A
Item 1B
Item 2
Item 3
Item 4
Item 4A
PART II
Item 5
Item 6
Item 7
Item 7A
Item 8
Item 9
Item 9A
Item 9B
PART III
Item 10
Item 11
Item 12
Item 13
Item 14
PART IV
Item 15
Signatures
Signatures
i
Page
1
7
14
15
16
16
17
18
20
21
34
35
65
65
67
68
68
68
68
68
68
71
ITEM 1. BUSINESS
RBC Bearings Incorporated
PART I
RBC Bearings Incorporated, together with its subsidiaries, is an international manufacturer and marketer of highly engineered precision bearings
and products, which are integral to the manufacture and operation of most machines, aircraft and mechanical systems, to reduce wear to moving parts,
facilitate proper power transmission, reduce damage and energy loss caused by friction, and control pressure and flow. The terms “we,” “us,” “our,” “RBC”
and the “Company” mean RBC Bearings Incorporated and its subsidiaries, unless the context indicates another meaning. While we manufacture products in
all major categories, we focus primarily on highly technical or regulated bearing products and engineered products for specialized markets that require
sophisticated design, testing and manufacturing capabilities. We believe our unique expertise has enabled us to garner leading positions in many of the
product markets in which we primarily compete. Over the past several years, we have broadened our end markets, products, customer base and geographic
reach. We currently have 43 facilities in seven countries, of which 31 are manufacturing facilities.
The Bearing and Engineered Products Industry
The bearing and engineered products industry is a fragmented multi-billion dollar market. Purchasers of bearings and engineered products include
producers of commercial and military aircraft, submarine and vehicle equipment, energy equipment, machinery manufacturers, industrial equipment and
machinery manufacturers, construction machinery manufacturers, rail and train equipment manufacturers, and mining and specialized equipment
manufacturers.
Demand for bearings and precision components in the diversified industrial market is influenced by growth factors in industrial machinery and
equipment shipments, and construction, mining, energy, marine and general industrial activity. In addition, usage of existing machinery will impact
aftermarket demand for replacement products. In the aerospace market, new aircraft build rates along with carrier traffic volume worldwide determines
demand for our solutions. Lastly, activity in the defense market is being influenced by modernization programs necessitating spending on new equipment,
as well as continued utilization of deployed equipment supporting aftermarket demand for replacement bearings and engineered products.
Customers and Markets
We serve a broad range of end markets where we can add value with our specialty precision bearings and engineered products, components, and
applications. We classify our customers into two principal categories: industrial and aerospace. These principal end markets utilize a large number of both
commercial and specialized bearings and engineered products. Although we provide a relatively small percentage of total bearing and engineered products
supplied to each of our principal markets, we believe we have leading market positions in many of the specialized product markets in which we primarily
compete. Financial information regarding geographic areas is set forth in Part II, Item 8. “Financial Statements and Supplementary Data,” Note 19 –
“Reportable Segments” of this Annual Report on Form 10-K.
Industrial Market (42% of net sales for the fiscal year ended April 3, 2021)
We manufacture bearings and engineered products for a wide range of diversified industrial markets, including construction and mining, oil and
natural resource extraction, heavy truck, marine, rail and train, packaging, semiconductor machinery, wind, canning and the general industrial markets. Our
products target market applications in which our engineering and manufacturing capabilities provide us with a competitive advantage in the marketplace.
Our largest industrial customers include Caterpillar, LM Wind, Newport News Shipbuilding, Komatsu and various aftermarket distributors
including Applied Industrial, BDI, Kaman, McMaster Carr, and Motion Industries. We believe that the diversification of our sales among the various
segments of the industrial market reduces our exposure to downturns in any individual segment. We believe opportunities exist for growth and margin
improvement in this market as a result of the introduction of new products, the expansion of aftermarket sales, and continued manufacturing process
improvements.
Aerospace Market (58% of net sales for the fiscal year ended April 3, 2021)
We supply bearings and engineered products for use in commercial, private and military aircraft and aircraft engines, guided weaponry, space and
satellites and vision and optical systems. We supply precision products for many of the commercial aircraft currently operating worldwide and are the
primary bearing supplier for many of the aircraft OEMs’ product lines. Commercial aerospace customers generally require precision products, often of
special materials, made to unique designs and specifications. Many of our aerospace bearings and engineered component products are designed and
certified during the original development of the aircraft being served, which often makes us the primary bearing supplier for the life of that aircraft.
1
We manufacture bearings and engineered products used by the U.S. Department of Defense (the “DOD”) and certain foreign governments for use
in fighter jets, troop transports, naval vessels, helicopters, gas turbine engines, armored vehicles, guided weaponry, spaceflight and satellites. We
manufacture an extensive line of standard products that conform to many domestic military application requirements, as well as customized products
designed for unique applications. Our bearings and engineered products are manufactured to conform to U.S. military specifications and are typically
custom-designed during the original product design phase, which often makes us the sole or primary supplier for the life of that product. Product approval
for use on military equipment is often a lengthy process ranging from six months to six years.
Our largest aerospace customers include the U.S. Department of Defense, Airbus, Boeing, Precision Castparts, Lockheed Martin, Safran,
Raytheon Technologies Corp and various aftermarket distributors including National Precision Bearing, Jamaica Bearings, Wencor, and Wesco Aircraft.
We believe our strong relationships with OEMs help drive our aftermarket sales since a portion of OEM sales are ultimately intended for use as
replacement parts. We believe that growth and margin expansion in this market will be driven primarily by expanding our international presence, new
commercial aircraft introductions, new products, share gains and the refurbishment and maintenance of existing commercial and military aircraft.
In fiscal 2021, approximately 5.8% of our net sales were made directly, and we estimate that approximately an additional 25.5% of our net sales
were made indirectly, to the U.S. government. The contracts or subcontracts for these sales may be subject to renegotiation of profit or termination at the
election of the U.S. government. Based on experience, we believe that no material renegotiations or refunds will be required. See Part I, Item 1A. “Risk
Factors – Future reductions or changes in U.S. government spending could negatively affect our business” of this Annual Report on Form 10-K.
Products
Bearings and engineered products are employed to perform several functions including reduction of friction, transfer of motion, carriage of loads,
and control of pressure and flows. We design, manufacture and market a broad portfolio of bearings and engineered products. We operate through operating
segments for which separate financial information is available, and for which operating results are evaluated regularly by our chief operating decision
maker in determining resource allocation and assessing performance. Those operating segments that have similar economic characteristics and meet all
other required criteria, including nature of the products and production processes, distribution patterns and classes of customers, are aggregated as
reportable segments.
The following table provides a summary of our four reportable product segments: Plain Bearings; Roller Bearings; Ball Bearings; and Engineered
Products:
Segment
Plain Bearings
Roller Bearings
Ball Bearings
Net Sales and Percent of Sales for the
Fiscal Year Ended
March 28,
2020
April 3,
2021
March 30,
2019
Representative Applications
$
$
$
293,990
$
48.3%
358,291
$
49.3%
323,251 ● Aircraft engine controls and landing gear
46.0% ● Missile launchers
● Mining, energy, construction and wind equipment
91,657
$
15.1%
132,642
$
18.2%
143,832 ● Aircraft hydraulics
20.5% ● Military and commercial truck chassis
●
Packaging machinery and canning
83,704
$
13.7%
74,231
$
10.2%
72,307 ● Radar and night vision systems
10.3% ● Airframe control and actuation
●
Semiconductor equipment
Engineered Products
$
139,633
$
22.9%
162,297
$
22.3%
163,126 ● Hydraulics, valves, fasteners and engines
Industrial gears, components and collets
23.2% ●
Plain Bearings. Plain bearings are primarily used to rectify inevitable misalignments in various mechanical components, such as aircraft controls,
helicopter rotors, or heavy mining and construction equipment. Such misalignments are either due to machining inaccuracies or result when components
change position relative to each other. Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes,
including rod end bearings, spherical plain bearings and journal bearings.
2
Roller Bearings. Roller bearings are anti-friction products that utilize cylindrical rolling elements. We produce three main designs: tapered roller
bearings, needle roller bearings and needle bearing track rollers and cam followers. We offer several needle roller bearing designs that are used in both
industrial applications and certain U.S. military aircraft platforms where there are high loads and the design is constrained by space considerations. A
significant portion of our sales of needle roller bearings is to the aftermarket rather than to OEMs. Needle bearing track rollers and cam followers have
wide and diversified use in the industrial market and are often prescribed as a primary component in articulated aircraft wings.
Ball Bearings. Ball bearings are devices that utilize high precision ball elements to reduce friction in high speed applications. We specialize in four
main types of ball bearings: high precision aerospace, airframe control, thin section, and industrial ball bearings. High precision aerospace bearings are
primarily sold to customers in the defense industry that require more technically sophisticated bearing products providing a high degree of fault tolerance
given the criticality of the applications in which they are used. Airframe control ball bearings are precision ball bearings that are plated to resist corrosion
and are qualified under a military specification. Thin section ball bearings are specialized bearings that use extremely thin cross sections and give
specialized machinery manufacturers many advantages. We produce a general line of industrial ball bearings sold primarily to the aftermarket.
Engineered Products. Engineered products consist primarily of highly engineered hydraulics and valves, fasteners, precision mechanical
components and machine tool collets. Engineered hydraulics and valves are used in aircraft and submarine applications and aerospace and defense
aftermarket services. Precision mechanical components are used in all general industrial applications where some form of movement is required. Machine
tool collets are cone-shaped metal sleeves used for holding circular or rod-like pieces in a lathe or other machine that provide effective part holding and
accurate part location during machining operations.
Product Design and Development
We produce specialized bearings and engineered products that are often tailored to the specifications of a customer or application. Our sales
professionals are highly experienced engineers who collaborate with our customers to develop bearing and engineered product solutions. The product
development cycle can follow many paths, which are dependent on the end market or sales channel. The process normally takes between three and six
years from concept to sale depending upon the application and the market. A typical process for a major OEM project begins when our design engineers
meet with the customer at the machine design conceptualization stage and work with them through the conclusion of the product development.
Often, at the early stage, a bearing or engineered product design is produced that addresses the expected demands of the application including
load, stress, heat, thermal gradients, vibration, lubricant supply, pressure and flows, and corrosion resistance, with one or two of these environmental
constraints being predominant in the design consideration. A bearing or engineered product design must perform reliably for the period of time required by
the customer’s product objectives.
Once a bearing or engineered product is designed, a mathematical simulation is created to replicate the expected application environment and
thereby allow optimization with respect to these design variables. Upon conclusion of the design and simulation phase, samples are produced and
laboratory testing commences at one of our test laboratories. The purpose of this testing phase is not only to verify the design and the simulation model but
also to allow further design improvement where needed. The last phase is field testing by the customer, after which the product is ready for sale.
For the majority of our products, the culmination of this lengthy process is the receipt of a product approval or certification, generally obtained
from either the OEM, the DOD or the Federal Aviation Administration (“FAA”), which allows us to supply the product to the OEM customer and to the
aftermarket. We currently have a significant number of such approvals, which often gives us a competitive advantage, and in many of these instances we
are the only approved supplier of a given bearing or engineered product.
Manufacturing and Operations
Our manufacturing strategies are focused on product reliability, quality and service. Custom and standard products are produced according to
manufacturing schedules that ensure maximum availability of popular items for immediate sale while carefully considering the economies of lot production
and special products. Capital programs and manufacturing methods development are focused on quality improvement, production costs and service. A
monthly review of product line production performance assures an environment of continuous attainment of profitability and quality goals.
3
Capacity. Our plants currently run on a full first shift with second and third shifts at select locations to meet the demands of our customers. We
believe that current capacity levels and future annual estimated capital expenditures on equipment up to approximately 3.0% to 3.5% of net sales should
permit us to effectively meet demand levels for the foreseeable future.
Inventory Management. We operate an inventory management program designed to balance customer delivery requirements with economically
optimal inventory levels. In this program, each product is categorized based on characteristics including order frequency, number of customers and sales
volume. Using this classification system, our primary goal is to maintain a sufficient supply of standard items while minimizing costs. In addition,
production cost savings are achieved by optimizing plant scheduling around inventory levels and customer delivery requirements. This leads to more
efficient utilization of manufacturing facilities and minimizes plant production changes while maintaining sufficient inventories to service customer needs.
Sales, Marketing and Distribution
Our marketing strategy is aimed at increasing sales within our two primary markets, targeting specific applications in which we can exploit our
competitive strengths. To affect this strategy, we seek to expand into geographic areas not previously served by us and we continue to capitalize on new
markets and industries for existing and new products. We employ a technically proficient sales force and utilize marketing managers, product managers,
customer service representatives and product application engineers in our selling efforts.
We have developed our sales force through the hiring of sales personnel with prior industry experience, complemented by an in-house training
program. We intend to continue to hire and develop expert sales professionals and strategically locate them to implement our expansion strategy. Today, our
direct sales force is located to service North America, Europe, Asia and Latin America and is responsible for selling all of our products. This selling model
leverages our relationship with key customers and provides opportunities to market multiple product lines to both established and potential customers. We
also sell our products through a well-established, global network of industrial and aerospace distributors. This channel primarily provides our products to
smaller OEM customers and the end users of bearings and engineered products that require local inventory and service. We intend to continue to focus on
building distributor sales volume.
The sale of our products is supported by a well-trained and experienced customer service organization, which provides customers with instant
access to key information regarding their purchases. We also provide customers with updated information through our website, and we have developed on-
line integration with specific customers, enabling more efficient ordering and timely order fulfillment for those customers.
We store product inventory in warehouses located in the Midwest, Southwest and on the East and West coasts of the U.S. as well as in France and
Switzerland. The inventory is located in these locations based on analysis of customer demand to provide superior service and product availability.
Competition
Our principal competitors include SKF, New Hampshire Ball Bearings, Rexnord, Precision Castparts and Timken, although we compete with
different companies for each of our product lines. We believe that for the majority of our products, the principal competitive factors affecting our business
are product qualifications, product line breadth, service, quality and price. Although some of our current and potential competitors may have greater
financial, marketing, personnel and other resources than us, we believe that we are well-positioned to compete with regard to each of these factors in each
of the markets in which we operate.
Product Qualifications. Many of the products we produce are qualified for the application by the OEM, the DOD, the FAA or a combination of
these. These credentials have been achieved for thousands of distinct items after years of design, testing and improvement. Several of our products are
protected by patents, and we believe that in many cases we have strong brand identity or we are the sole source for products for a particular application.
Product Line Breadth. Our products encompass a broad range of designs which often create a critical mass of complementary bearings and
engineered products for our markets. This position provides many of our industrial and aerospace customers with a single manufacturer to provide the
engineering service and product breadth needed to achieve a series of OEM design objectives and/or aftermarket requirements. This enhances our value to
the OEM considerably while strengthening our overall market position.
4
Service. Product design, performance, reliability, availability, quality, and technical and administrative support are elements that define the service
standard for this business. Our customers are sophisticated and demanding, as our products are fundamental and enabling components to the construction or
operation of their machinery. We maintain inventory levels of our most popular items for immediate sale and service. Our customers have high expectations
regarding product availability and quality, and the primary emphasis of our service efforts is to provide the widest possible range of available products
delivered on a timely basis.
Price. We believe our products are priced competitively in the markets we serve and we continually evaluate our manufacturing and other
operations to maximize efficiencies in order to maintain competitive prices while maximizing our profit margins. We invest considerable effort to develop
our price to value algorithms and we price to market levels where required by competitive pressures.
Suppliers and Raw Materials
We obtain raw materials, component parts and supplies from a variety of sources and generally from more than one supplier. Our principal raw
material is steel. Our suppliers and sources of raw materials are based in the U.S., Europe and Asia. We purchase steel at market prices, which fluctuate as a
result of supply and demand driven by economic conditions in the marketplace. For further discussion of the possible effects of changes in the cost of raw
materials on our business, see Part I, Item 1A. “Risk Factors” of this Annual Report on Form 10-K.
Backlog
As of April 3, 2021, we had order backlog of $394.8 million compared to a backlog of $478.6 million in the prior fiscal year. Orders included in
our backlog are subject to cancellation, delay or modifications by our customers prior to fulfillment. We sell many of our products pursuant to contractual
agreements, single-source relationships or long-term purchase orders, each of which may permit early termination by the customer. However, we believe
that the unique nature of many of our products prevents other suppliers from being able to satisfy customer orders on a timely or cost-effective basis,
thereby making it impracticable for our customers to shift their purchase of these products to other suppliers.
Human Capital
RBC employs 2,990 people at our 31 U.S. facilities, approximately 5% of which are exempt and 95% are non-exempt. In addition, we employ 895
people at our 12 facilities located in Mexico, France, Switzerland, Germany, Poland and China. Nearly all of our personnel are RBC employees rather than
independent contractors, temporaries or third-party labor provider personnel.
Our human capital objective is to attract and retain high-performing people who can work in a culture that fosters innovation and continuous
improvement. To achieve that objective, we maintain an aggressive talent recruitment program, a fair and competitive compensation program, an on-going
training and development program, and an ethical and safe work environment.
Talent Recruitment. Critical to our success is that we have a deep and talented pool of engineers who oversee the production of our current
products to the highest standards, work directly with customers on applications, and direct the research and development for new products. To maintain that
talent pool, we actively recruit engineers from over 40 colleges and universities around the U.S. In addition, we have developed deep collaborative
relationships with a select group of schools, including internship and trainee programs with several of these schools.
Compensation. We offer fair and competitive compensation to our employees. Our employee benefits package includes medical, dental and vision
coverage, life insurance, supplemental disability coverage, and 401(k) and supplemental employee retirement plans. In addition, participation in our long-
term equity incentive plan goes very deep in our organization, providing employees with equity compensation/awards that they might not receive if they
worked for one of our competitors.
Training. An important part of achieving our human capital objective is our in-house training programs – RBC University, Materials University,
and Mechanical Engineering Training. These programs provide our employees with a uniform foundation regarding how we do business, expand their
subject matter expertise, and develop the various leadership positions across our organization, including plant management and general management. We
also offer a tuition reimbursement program for many employees wishing to further their classroom education in their chosen field.
5
Ethics. We expect our personnel to conduct the business of RBC in a legal and ethical manner. To ensure that they do that, our people are required
to comply at all times with our corporate Code of Conduct, which among other things requires them to:
● deal fairly with their coworkers and RBC’s customers, suppliers and competitors,
● comply with all applicable laws,
● protect RBC’s proprietary information and other assets, and
● avoid conflicts of interest with RBC.
Workplace Safety. Safety is of paramount importance to RBC and so we go to great lengths in striving for a zero-incident workplace that is
consistent with our mandate to produce the highest quality, highly engineered products for our customers. Our general managers and operations managers
are charged with creating and maintaining the highest standards of safety for employees, visitors and the local community through the use of industry best
practices at their facilities. Monthly, each of our facilities reports to senior leadership on key safety metrics and we maintain a proactive approach in
assessing and mitigating risk through root cause analysis, communication, training and teamwork.
As part of the nation’s critical infrastructure sectors (defense industrial base sector and critical manufacturing sector) RBC has been required to
operate our manufacturing facilities during the COVID-19 pandemic using a mostly in-person workforce. We implemented strict cleaning, social
distancing, quarantining and other safety measures to minimize the risk to our employees of contracting COVID-19 at work and these measures have
proved thus far to be very successful as the infection rate among our workforce has been very low.
Intellectual Property
We own U.S. and foreign patents and trademark registrations and U.S. copyright registrations, and have U.S. trademark and patent applications
pending. We file patent applications and maintain patents to protect certain technology, inventions and improvements that are important to the development
of our business, and we file trademark applications and maintain trademark registrations to protect product names that have achieved brand-name
recognition among our customers. We also rely upon trade secrets, know-how and continuing technological innovation to develop and maintain our
competitive position. Many of our brands are well recognized by our customers and are considered valuable assets of our business. We do not believe,
however, that any individual item of intellectual property is material to our business.
Regulation
Product Approvals. Essential to servicing the aerospace and defense markets is the ability to obtain product approvals. We have a substantial
number of product approvals in the form of OEM approvals or Parts Manufacturer Approvals, or “PMAs,” from the FAA. We also have a number of active
PMA applications in process. These approvals enable us to provide products used in virtually all domestic aircraft platforms presently in production or
operation.
We are subject to various other federal laws, regulations and standards. Although we are not presently aware of any pending legal or regulatory
changes that may have a material impact on us, new laws, regulations or standards or changes to existing laws, regulations or standards could subject us to
significant additional costs of compliance or liabilities, and could result in material reductions to our results of operations, cash flow or revenues.
Environmental Matters
We are subject to federal, state and local environmental laws and regulations, including those governing discharges of pollutants into the air and
water, the storage, handling and disposal of wastes and the health and safety of employees. We also may be liable under the Comprehensive Environmental
Response, Compensation, and Liability Act or similar state laws for the costs of investigation and clean-up of contamination at facilities currently or
formerly owned or operated by us, or at other facilities at which we have disposed of hazardous substances. In connection with such contamination, we
may also be liable for natural resource damages, U.S. government penalties and claims by third parties for personal injury and property damage. Agencies
responsible for enforcing these laws have authority to impose significant civil or criminal penalties for non-compliance. We believe we are currently in
material compliance with all applicable requirements of environmental laws. We do not anticipate material capital expenditures for environmental
compliance in fiscal year 2022.
6
Available Information
We file our annual, quarterly and current reports, proxy statements, and other documents with the Securities Exchange Commission (“SEC”) under
the Securities Exchange Act of 1934. The public may read and copy any materials filed with the SEC at the SEC’s Office of Investor Education and
Advocacy at 100F Street, NE, Washington, D.C. 20549. The public may obtain information on the operation of the Office of Investor Education and
Advocacy by calling the SEC at 1–800–SEC–0330. Also, the SEC maintains an Internet website that contains reports, proxy and information statements,
and other information regarding issuers that file electronically with the SEC. The public can obtain any documents that are filed by us at
http://www.sec.gov.
In addition, this Annual Report on Form 10-K, as well as our quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to
any of the foregoing reports, and our governance documents, are made available free of charge on our website (http://www.rbcbearings.com) as soon as
reasonably practicable after such reports are electronically filed with or furnished to the SEC. Copies of the above filings will also be provided free of
charge upon written request to us.
ITEM 1A. RISK FACTORS
Cautionary Statement As To Forward-Looking Information
This report includes “forward-looking statements” within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation
Reform Act of 1995. All statements other than statements of historical fact are “forward-looking statements” for purposes of federal and state securities
laws, including: projections of earnings, cash flows, revenue or other financial items; statements of the plans, strategies and objectives of management for
future operations; statements concerning proposed new services or developments; statements regarding future economic conditions or performance or
future growth rates in the markets we serve; statements regarding future raw material costs or supply; statements of belief; and statements of assumptions
underlying any of the foregoing. Forward-looking statements may include the words “may,” “could,” “estimate,” “intend,” “plan,” “continue,” “believe,”
“expect,” “anticipate” or other comparable terminology, or the negative of such terms.
Although we believe that the expectations and assumptions reflected in any of our forward-looking statements are reasonable, actual results could
differ materially from those projected or assumed in any of our forward-looking statements. Our future financial condition, results of operations, and cash
flows, as well as any forward-looking statements, are subject to change and to inherent risks and uncertainties, such as those disclosed in this Annual
Report on Form 10-K. Factors that could cause our actual results, performance and achievements or industry results to differ materially from estimates or
projections contained in forward-looking statements include, among others, the following:
● Effects of the COVID-19 pandemic;
● Weaknesses or cyclicality in any of the industries in which our customers operate;
● Changes in marketing, product pricing and sales strategies, or development of new products by us or our competitors;
● Future reductions in U.S. governmental spending or changes in governmental programs, particularly military equipment procurement programs;
● Conditions that adversely affect the business of any of our significant customers;
● Our ability to obtain and retain product approvals;
● Supply and costs of raw materials (particularly steel) and energy resources, the imposition of import tariffs, and our ability to pass through these
costs on a timely basis;
● Our ability to acquire and integrate complementary businesses;
● Unanticipated liabilities of acquired businesses;
● Unexpected equipment failures or catastrophic events;
● Our ability to attract and retain our management team and other highly skilled personnel;
● Work stoppages and other labor problems affecting us or our customers or suppliers;
● Changes in trade agreements or treaties and the imposition of tariffs on our goods exported to other countries;
● Regulatory changes or developments in the U.S. or in foreign countries where we produce or sell products;
● Developments or disputes concerning patents or other proprietary rights;
● Risks associated with utilizing information technology systems;
● Risks associated with operating internationally, including currency translation risks;
● Investors’ perceptions of us and our industry; and
● Other risks and uncertainties including but not limited to those described from time to time in our current and quarterly reports filed with the SEC.
7
These and additional factors that could cause actual results to differ materially from our forward-looking statements are set forth in this Annual
Report on Form 10-K under Part I, Item 1. “Business,” Part I, Item 1A. “Risk Factors,” Part II, Item 7. “Management’s Discussion and Analysis of
Financial Condition and Results of Operations,” and Part II, Item 8. “Financial Statements and Supplementary Data.” All forward-looking statements
contained in this report and any subsequently filed reports are expressly qualified in their entirety by these cautionary statements.
We have no duty to update any forward-looking statements after the date of this report to conform such statements to actual results or to changes
in our expectations. You are advised, however, to review any disclosures we make on related subjects in our future periodic filings with the SEC.
Risk Factors Relating to Our Company
Our business, operating results, cash flows or financial condition could be materially adversely affected by any of the following risks. The trading
price of our common stock could decline due to any of these risks, and you could lose all or part of your investment. You should carefully consider these
risks before investing in shares of our common stock.
The bearing and engineered products industries are highly competitive, and competition could reduce our profitability or limit our ability to grow.
The global bearing and engineered products industries are highly competitive, and we compete with many U.S. and non-U.S. companies, some of
which benefit from lower labor costs and fewer regulatory burdens than us. We compete primarily based on product qualifications, product line breadth,
service and price. Certain competitors may be better able to manage costs than us or may have greater financial resources than we have. Due to the
competitiveness in the bearing and engineered products industries we may not be able to increase prices for our products to cover increases in our costs,
and we may face pressure to reduce prices, which could materially reduce our revenues, cash flows and profitability. Competitive factors, including
changes in market penetration, increased price competition and the introduction of new products and technology by existing and new competitors, could
result in a material reduction in our revenues, cash flows and profitability.
The loss of a major customer, or a material adverse change in a major customer’s business, could result in a material reduction in our revenues, cash
flows and profitability.
Our top ten customers generated approximately 36%, 34% and 35% of our net sales during fiscal 2021, 2020 and 2019, respectively. Accordingly,
the loss of one or more of those customers or a substantial decrease in those customers’ purchases from us could result in a material reduction in our
revenues, cash flows and profitability. If one of our major customers were to experience an adverse change in its business, that customer could reduce its
purchases from us. For example, due to Boeing’s 737 MAX production shutdown that began in 2019 we experienced the suspension or cancellation of
orders for product used in the 737 MAX airframe and engines. In addition, in fiscal 2021 we experienced reduced purchasing from customers whose
businesses were constrained by the COVID-19 pandemic.
The consolidation and combination of defense or other manufacturers could eliminate customers from the industry and/or put downward pricing
pressures on sales of component parts. For example, the consolidation that has occurred in the defense industry in recent years has significantly reduced the
overall number of defense contractors in the industry. In addition, if one of our customers is acquired or merged with another entity, the new entity may
discontinue using us as a supplier because of an existing business relationship between one of our competitors and the acquiring company, or because it
may be more efficient to consolidate certain suppliers within the newly formed enterprise. The significance of the impact that such consolidation could
have on our business is difficult to predict because we do not know when or if one or more of our customers will engage in merger or acquisition activity.
However, if such activity involved our material customers it could materially impact our revenues, cash flows and profitability.
Our results have been and are likely to continue to be impacted by the COVID-19 pandemic.
The public health issues resulting from COVID-19 and the precautionary measures instituted by governments and businesses to mitigate its spread
have caused, and are expected to continue to cause, world-wide business disruption, plant closures, inventory shortages, delivery delays, supply chain
disruptions, and order cancellations and deferrals. As a result, the pandemic had an adverse effect on our financial results and business operations
throughout fiscal 2021, which contributed to the 16.3% decline in our revenue from the prior fiscal year. The lower demand for our products made it
necessary to reduce our workforce and consolidate certain of our production facilities. It is expected that the pandemic will continue to adversely affect our
business during fiscal 2022, although the severity and duration depend on future developments that are highly uncertain and unpredictable.
8
While we have been able to keep our operations open for the most part during the pandemic and COVID-19 vaccines are now being administered
throughout the world, it remains possible that there could be a future increase in the COVID-19 infection rate that results in governmental orders or
COVID-19 outbreaks among the local workforce that necessitate the closure of any of our operations or those of any of our critical suppliers, which would
adversely affect our production. In addition, operations that remain open may be adversely affected by personnel shortages, which could impair the
operation’s efficiency.
Demand for our products would be affected if the pandemic leads to the closure of any operations of our significant customers. For example,
Boeing’s temporary shut-down of its two primary production facilities in April 2020 led to the cancellation or deferral of various orders for our products
that support Boeing production. In addition, demand for our commercial aerospace products has been adversely affected by the significant reduction in
commercial air travel during the pandemic.
Weakness in any of the industries in which our customers operate, as well as the cyclical nature of our customers’ businesses generally, could
materially reduce our revenues, cash flows and profitability.
The commercial aerospace, mining and construction equipment and other diversified industrial industries to which we sell our products are, to
varying degrees, cyclical and tend to decline in response to overall declines in industrial production. Margins in those industries are highly sensitive to
demand cycles, and our customers (or our customers’ customers) in those industries historically have tended to delay large capital purchases and projects,
including expensive maintenance and upgrades, during economic downturns. As a result, our business is also cyclical, and the demand for our products by
these customers depends, in part, on overall levels of industrial production, general economic conditions, and business confidence levels. Many of our
customers have historically experienced periodic downturns, which often have had a negative effect on demand for our products. Future downward
economic cycles or customer downturns could reduce sales of our products resulting in reductions in our revenues, cash flows and profitability.
The COVID-19 pandemic has caused a significant reduction in air travel, which has lead to various airlines delaying or cancelling previously-
scheduled aircraft purchases as they reassess their fleet needs and/or take advantage of opportunities to purchase aircraft that have become available in the
used aircraft market. This reduction in new aircraft purchases has had an adverse effect on our sales of bearings and component parts.
Future reductions or changes in U.S. government spending could negatively affect our business.
In fiscal 2021, approximately 5.8% of our net sales were made directly, and we estimate that approximately an additional 25.5% of our net sales
were made indirectly, to the U.S. government to support military or other government projects. Our failure (or the failure of our customers that are prime
contractors to the government) to obtain new government contracts, the cancellation of government contracts relating to our products, or reductions in
federal budget appropriations for programs in which our products are used could materially reduce our revenues, cash flows and profitability. A reduction
in federal budget appropriations relating to our products could result from a shift in government defense spending to other programs in which we are not
involved or a reduction in U.S. government defense spending generally (due to budget reduction initiatives or a shift in government spending priorities).
Fluctuating supply and costs of subcomponents, raw materials and energy resources, or the imposition of import tariffs, could materially reduce our
revenues, cash flows and profitability.
Our business is dependent on the availability and costs of subcomponents, raw materials, particularly steel (generally in the form of stainless and
chrome steel, which are commodity steel products), and energy resources. The availability and prices of subcomponents, raw materials and energy
resources may be subject to change due to, among other things, new laws or regulations, suppliers’ allocations to other purchasers, interruptions in
production or deliveries by suppliers (including interruption caused by the COVID-19 pandemic), and changes in exchange rates and supplier costs and
profit expectations. The United States has imposed tariffs on steel and aluminum imports, and could impose tariffs on other items that we import, which
could increase the cost of raw materials and decrease the available supply. Although we currently maintain alternative supply sources, our business is
subject to the risk of price fluctuations and periodic delays in the delivery of certain subcomponents or raw materials. Disruptions in the supply of
subcomponents, raw materials or energy resources could temporarily impair our ability to manufacture our products for our customers or require us to pay
higher prices in order to obtain these items from other sources, which could thereby affect our net sales and profitability.
9
Where our customer contracts permit us to do so, we seek to pass through a significant portion of our additional costs to our customers through
steel surcharges or price increases. However, many of our contracts are fixed-price contracts under which we are not able to pass these additional costs on
to our customers. Even where we are able to pass these steel surcharges or price increases to our customers, there may be a lag of several months between
the time we experience a cost increase and the time we are able to implement surcharges or price increases, particularly for orders already in our backlog.
Competitive pressures and the terms of certain of our long-term contracts may require us to absorb at least part of these cost increases. As a result, our
gross margin percentage could decline. We cannot provide assurances that we will be able to continue to pass these additional costs on to our customers at
all or on a timely basis or that our customers will not seek alternative sources of supply if there are significant or prolonged increases in the price of
subcomponents or other raw materials or energy resources.
Our results could be impacted by governmental trade policies and tariffs relating to our supplies imported from foreign vendors or our finished goods
exported to other countries.
The U.S. government has imposed tariffs on the importation of various products that we use to produce our finished goods, and various foreign
countries, including the People’s Republic of China, could impose retaliatory tariffs on our products exported to those countries. While this situation has
not had a material adverse effect on our business, a further escalation of tariffs on our foreign-sourced supplies and/or the imposition of tariffs on our
finished goods exported to other countries could adversely impact our operating costs or demand for our products.
Our products are subject to certain approvals and government regulations and the loss of such approvals, or our failure to comply with such
regulations, could materially reduce our revenues, cash flows and profitability.
Essential to servicing the aerospace market is the ability to obtain product approvals. We have a substantial number of product approvals, which
enable us to provide products used in virtually all domestic aircraft platforms presently in production or operation. Product approvals are typically issued
by the FAA to designated OEMs who are Production Approval Holders of FAA-approved aircraft. These Production Approval Holders provide quality
control oversight and generally limit the number of suppliers directly servicing the commercial aerospace market. Regulations enacted by the FAA provide
for an independent process (the PMA process) that enables suppliers who currently sell their products to the Production Approval Holders to also sell
products to the aftermarket. Our foreign sales may be subject to similar approvals or U.S. export control restrictions. We cannot assure you that we will not
lose approvals for our products in the future. The loss or suspension of product approvals could result in lost sales and materially reduce our revenues, cash
flows and profitability.
The repair and overhaul of aircraft parts and accessories throughout the world is highly regulated by government agencies, including the FAA. Our
repair and overhaul operations are subject to certification pursuant to regulations established by the FAA and foreign government agencies, with regulations
varying from country to country, although compliance with FAA requirements generally satisfies regulatory requirements in other countries. Our failure to
comply with these regulations, or our compliance with new and more stringent government regulations, if enacted, could have an adverse effect on our
business, financial condition and results of operations.
Our U.S. government business is subject to specific procurement regulations and other requirements that increase our performance and compliance
costs. These costs might increase in the future, reducing our profitability. Although we have procedures designed to assure compliance with these
regulations and requirements, failure to do so under certain circumstances could lead to suspension or debarment from future government contracting or
subcontracting for a period of time, which would result in lost sales and reduce our revenues, cash flows and profitability and could adversely impact our
reputation.
The retirement of commercial aircraft could reduce our revenues, cash flows and profitability.
We sell replacement parts used in the repair and overhaul of jet engine and aircraft components, as well as provide such repair and overhaul
services ourselves. As aircraft or engines for which we offer replacement parts or repair and overhaul services are retired, demand for these parts and
services could decline and could reduce our revenue, cash flows and profitability.
Risks associated with utilizing information technology systems could adversely affect our operations.
We rely upon our information technology (“IT”) systems to process, transmit and store electronic information to manage and operate our business.
Further, in the ordinary course of business we store sensitive data, including intellectual property, on our networks. The secure maintenance and
transmission of this information is critical to our business operations.
10
We may face cyber events and other IT security threats, including malware, ransomware, phishing and other intrusions, to our IT infrastructure,
attempts to gain unauthorized access to proprietary, classified or confidential information, and threats to the physical security of our IT systems. As a U.S.
government contractor, our risk of cyber events may be greater than the risk faced by other companies that are not government contractors. In addition to
security threats, our IT systems may also be subject to network, software or hardware failures. The unavailability of our IT systems, the failure of these
systems to perform as anticipated, or any significant breach of data security could cause loss of data, disrupt our operations, require significant management
attention and resources, subject us to liability to third parties, regulatory actions, or contract termination, and negatively impact our reputation among our
customers and the public, which could have a negative impact on our financial and competitive position, results of operations and liquidity. In addition, our
business with our customers and vendors could be impacted by cyber events on their IT systems.
To address the risk to our IT systems and data, we maintain an IT security program designed to resist cyber events and to mitigate the damage
from successful events. A cyber event occurred during the last week of February 2021 that disrupted our IT systems. We took immediate steps to address
the incident, including engaging two IT security and forensics experts to assess the impact to any affected data and to correct the security weakness that
was exploited in the event. Based upon the forensic review, there is no evidence of data access or exfiltration and no material impact to the operations of
the Company. The Company has implemented a variety of measures to enhance and modernize its systems to guard against similar incidents in the future,
and is also enhancing the Company’s recovery capabilities in the event of future incidents. We continue to evaluate the need to upgrade and/or replace our
systems and network infrastructure to protect our IT environment, improve the effectiveness of our systems, and strengthen our cybersecurity program.
However, these upgrades and replacements may not result in the protection or improvements anticipated.
Work stoppages and other labor problems could materially reduce our ability to operate our business.
We currently have three collective bargaining agreements covering employees at our Plymouth, Indiana, Fairfield, Connecticut and West Trenton,
New Jersey facilities, representing approximately 8.2% of our hourly employees as of April 3, 2021. While we believe our relations with our employees are
satisfactory, the inability to satisfactorily negotiate and enter into new collective bargaining agreements upon expiration, or a lengthy strike or other work
stoppage at any of our facilities, particularly at some of our larger facilities, could materially reduce our ability to operate our business. In addition, any
attempt by our employees not currently represented by a union to join a union could result in additional expenses, including with respect to wages, benefits
and pension obligations.
In addition, work stoppages at one or more of our customers or suppliers (including suppliers of transportation services), many of which have
large unionized workforces, could also cause disruptions to our business that we cannot control, and these disruptions could materially reduce our revenues,
cash flows and profitability.
Unexpected equipment failures or catastrophic events could increase our costs and reduce our sales due to production curtailments or shutdowns.
Our manufacturing processes are dependent upon critical pieces of turning, milling, grinding, and electrical equipment, and this equipment could,
on occasion, be out of service as a result of unanticipated failures. In addition to equipment failures, our facilities are also subject to the risk of catastrophic
loss due to unanticipated events such as fires, explosions, earthquakes or violent weather conditions. In the future, we could experience material plant
shutdowns or periods of reduced production as a result of these types of equipment failures or catastrophes. Interruptions in production capabilities will
inevitably increase our production costs and reduce revenues, cash flows and profitability for the affected period.
We may not be able to continue to make the acquisitions necessary for us to realize our growth strategy.
The acquisition of businesses that complement or expand our operations has been and continues to be an important element of our business
strategy. We frequently engage in evaluations of potential acquisitions and negotiations for possible acquisitions, some of which, if consummated, could be
significant to us. We cannot assure you that we will be successful in identifying attractive acquisition candidates or completing acquisitions on favorable
terms in the future. Our inability to acquire businesses, or to operate them profitably once acquired, could have a material adverse effect on our business,
financial position, cash flow and growth.
11
Our ability to realize anticipated benefits and synergies from our acquisitions could be affected by a number of factors, including: the need for
greater than expected cash or other financial resources or management time in order to implement or integrate acquisitions; increases in other expenses
related to an acquisition, including restructuring and other exit costs; the timing and impact of purchase accounting adjustments; difficulties in employee or
management integration, including labor disruptions or disputes; and unanticipated liabilities associated with acquired businesses.
Any potential cost-saving opportunities may take several quarters following an acquisition to implement, and any results of these actions may not
be realized for several quarters thereafter, if at all.
Businesses that we have acquired or that we may acquire in the future may have liabilities which are not known to us.
In certain cases, we have assumed liabilities of acquired businesses and may assume liabilities of businesses that we acquire in the future. There
may be liabilities or risks that we are required to assume in order to complete an acquisition, or that we do not discover, or that we underestimate, in the
course of performing our due diligence investigations of the acquired business. Additionally, businesses that we have acquired or may acquire in the future
may have made previous acquisitions, and we could be subject to certain liabilities and risks relating to these prior acquisitions as well. We cannot assure
you that our rights to indemnification contained in definitive acquisition agreements that we have entered or may enter into will be sufficient in amount,
scope or duration to fully offset the risk of liabilities relating to acquired businesses. Any such liabilities, individually or in the aggregate, could have a
material adverse effect on our business, financial condition or results of operations. As we begin to operate acquired businesses, we may learn additional
information about them that adversely affects us, such as unknown or contingent liabilities, issues relating to compliance with applicable laws, or issues
related to ongoing supply chain or customer relationships or order demand.
Goodwill and indefinite-lived intangibles comprise a significant portion of our total assets, and if we determine that goodwill and indefinite-lived
intangibles have become impaired in the future, our results of operations and financial condition in such years may be materially and adversely
affected.
Goodwill represents the excess of cost over the fair market value of net assets acquired in business combinations. Indefinite-lived intangibles
represent repair station certifications obtained in business combinations and assumed to have indefinite lives. We review goodwill and indefinite-lived
intangibles at least annually for impairment and any excess in carrying value over the estimated fair value is charged to the results of operations. Our
estimates of fair value are based on assumptions about the future operating cash flows, growth rates, discount rates applied to these cash flows, and current
market estimates of value. If we are required to record a charge to earnings because of an impairment of goodwill or indefinite-lived intangibles, our results
of operations and financial condition could be materially and adversely affected.
We depend heavily on our senior management and other key personnel, the loss of whom could materially affect our financial performance and
prospects.
Our business is managed by a number of key personnel, including our CEO Dr. Michael J. Hartnett. Our future success will depend on, among
other things, our ability to keep the services of these personnel and to hire their successors and other highly qualified employees at all levels.
Our international operations are subject to risks inherent in such activities.
We have operations in Mexico, France, Switzerland, Poland, China and Germany. Of our 43 facilities in seven countries, 12 are located outside the
U.S., including ten manufacturing facilities in three countries.
In fiscal 2021, 10.3% of our net sales were generated by our international operations. We expect that this proportion is likely to increase as we
seek to increase our penetration of foreign markets, including through acquisitions. Our foreign operations are subject to the risks inherent in such activities
such as: currency devaluations, logistical and communication challenges, costs of complying with a variety of foreign laws and regulations, greater
difficulties in protecting and maintaining our rights to intellectual property, difficulty in staffing and managing geographically diverse operations, acts of
terrorism or war or other acts that may cause social disruption which are difficult to quantify or predict, and general economic conditions in these foreign
markets. Our international operations may be negatively impacted by changes in government policies, such as changes in laws and regulations, restrictions
on imports and exports, sources of supply, duties or tariffs, the introduction of measures to control inflation, and changes in the rate or method of taxation.
To date we have not experienced significant difficulties with the foregoing risks associated with our international operations.
12
Currency translation risks may have a material impact on our results of operations.
Our Swiss operation utilizes the Swiss franc as the functional currency, our French and German operations utilize the euro as the functional
currency and our Polish operation utilizes the Polish zloty as the functional currency. Foreign currency transaction gains and losses are included in
earnings. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to another within the group and
to foreign currency denominated trade receivables. Unrealized currency translation gains and losses are recognized upon translation of the foreign
operations’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency exchange rates between
the U.S. dollar and the currencies used by our international operations have had, and will continue to have, an impact on our earnings. We periodically enter
into derivative financial instruments such as forward exchange contracts to reduce the effect of fluctuations in exchange rates on certain third-party sales
transactions denominated in non-functional currencies. Currency fluctuations may affect our financial performance in the future and we cannot predict the
impact of future exchange rate fluctuations on our results of operations. See Part II, Item 7A. “Quantitative and Qualitative Disclosures about Market Risk
—Foreign Currency Exchange Rates” of this Annual Report on Form 10-K.
We may incur material losses for product liability and recall-related claims.
We are subject to a risk of product and recall-related liability in the event that the failure, use or misuse of any of our products results in personal
injury, death or property damage or our products do not conform to our customers’ specifications. In particular, our products are installed in a number of
types of vehicle fleets, including airplanes, trains, automobiles, heavy trucks and farm equipment, many of which are subject to government–ordered recalls
as well as voluntary recalls by the manufacturer. If one of our products is found to be defective, causes a fleet to be disabled or otherwise results in a
product recall, significant claims may be brought against us. We currently maintain insurance coverage for product liability claims but not for recall-related
claims. We cannot assure you that product liability claims, if made, would be covered by our insurance or would not exceed our insurance coverage limits.
Claims that are not covered by insurance, or that exceed insurance coverage limits, could result in material losses. Claims that are covered by insurance
could result in increased future insurance costs.
Our intellectual property and proprietary information are valuable, and any inability to protect them could adversely affect our business and results of
operations; in addition, we may be subject to infringement claims by third parties.
Our ability to compete effectively is dependent upon our ability to protect and preserve the intellectual property and proprietary information
owned, licensed or otherwise used by us. We have numerous U.S. and foreign trademark registrations and patents. We also have U.S. and foreign trademark
and patent applications pending. We cannot assure you that our pending trademark and patent applications will result in trademark registrations and issued
patents, and our failure to secure rights under these applications may limit our ability to protect the intellectual property rights that these applications were
intended to cover. Although we have attempted to protect our intellectual property and proprietary information both in the United States and in foreign
countries through a combination of patent, trademark, copyright and trade secret protection, and non-disclosure agreements, these steps may be insufficient
to prevent unauthorized use of our intellectual property and proprietary information, particularly in foreign countries where the protection available for
such intellectual property and proprietary information may be limited. We cannot assure you that any of our intellectual property rights will not be infringed
upon or that our trade secrets will not be misappropriated or otherwise become known to or independently developed by competitors. We may not have
adequate remedies available for any such infringement or other unauthorized use. We cannot assure you that any infringement claims asserted by us will
not result in our intellectual property being challenged or invalidated, that our intellectual property will be held to be of adequate scope to protect our
business, or that we will be able to deter current and former employees, contractors or other parties from breaching confidentiality obligations and
misappropriating trade secrets.
We could become subject to litigation claiming that our intellectual property or proprietary information infringes the rights of a third party. In that
event, we could incur substantial defense costs and, if such litigation is successful, we could be required to pay the claimant damages and royalties for our
past and future use of such intellectual property or proprietary information, or we could be prohibited from using it in the future. Our inability to use our
intellectual property and proprietary information on a cost-effective basis in the future could have a material adverse effect on our revenue, cash flow and
profitability. See Part I, Item 1. “Business—Intellectual Property” of this Annual Report on Form 10-K.
Cancellation of orders in our backlog could negatively impact our revenues, cash flows and profitability.
As of April 3, 2021, we had an order backlog of $394.8 million. However, orders included in our backlog are subject to cancellation, delay or
other modifications by our customers and we cannot assure you that these orders will ultimately be fulfilled.
13
Risk Factors Related to our Common Stock
Provisions in our charter documents may prevent or hinder efforts to acquire a controlling interest in us.
Provisions of our certificate of incorporation and bylaws may discourage, delay or prevent a merger, acquisition or other change in control that
stockholders may consider favorable, including transactions that might benefit our stockholders or in which our stockholders might otherwise receive a
premium for their shares. These provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management.
Pursuant to our charter documents, our Board of Directors (the “Board”) consists of eight members serving staggered three-year terms and divided
into three classes. As a result, two annual meetings are required to change a majority of the Board members. In addition, our certificate of incorporation
authorizes the issuance of preferred stock, with such designations, rights and preferences as may be determined from time to time by the Board, without
stockholder approval. If we were to issue preferred stock in the future, it could be utilized, under certain circumstances, as a method of discouraging,
delaying or preventing a change in control of us, or could impede our stockholders’ ability to approve a transaction they consider in their best interests.
Although we have no present intention to issue any preferred stock, we may do so in the future. Holders of our common stock do not have preemptive
rights to subscribe for a pro rata portion of preferred stock or any other capital stock that we may issue in the future.
We may not pay cash dividends in the foreseeable future.
Except for a $2.00 per common share special dividend paid in 2014, we have not paid any cash dividends on our common stock and may not pay
cash dividends in the future. Instead, we plan to apply earnings and excess cash, if any, to the expansion and development of our business. Thus, the return
on your investment, if any, could depend solely on an increase, if any, in the market value of our common stock.
ITEM 1B. UNRESOLVED STAFF COMMENTS
None
14
ITEM 2. PROPERTIES
Our principal executive office consists of 42,000 square feet located at One Tribology Center, Oxford, Connecticut. We also own or lease
manufacturing facilities in the United States, Mexico, Switzerland and Poland as follows:
Manufacturing Facility Location
Arizona: Tucson
California:
Baldwin Park
Fountain Valley
Garden Grove
Rancho Dominguez
San Diego
Santa Ana
Santa Fe Springs
Torrance
Connecticut:
Fairfield
Middlebury
Oxford
Torrington
Georgia: Ball Ground
Indiana:
Bremen
Franklin
Plymouth
New Jersey: West Trenton
Ohio: Mentor
Oklahoma: Oklahoma City
South Carolina:
Hartsville
Westminster
Mexico:
Guaymas, Sonora
Reynosa, Tamaulipas
Tecate, Baja
Poland: Mielec
Switzerland:
Bürglen
Delémont
Owned/Leased
owned
Square
Footage
155,000
leased
leased
leased
owned
leased
owned
leased
leased
owned
owned
owned
owned
owned
owned
owned
owned
leased
leased
leased
owned
owned
leased
leased
leased
owned
leased
owned
30,000
22,000
18,000
70,000
38,000
70,000
40,000
72,000
80,000
60,000
89,000
137,000
40,000
50,000
30,000
40,000
86,000
57,000
75,000
148,000
78,000
70,000
202,000
38,000
44,000
20,000
132,000
15
We also own or lease the following distribution centers:
Distribution Center Location
California: Rancho Dominguez
Illinois: Hoffman Estates
South Carolina: Bishopville
Texas: Grand Prairie
Owned/Leased
owned
leased
owned
leased
Square
Footage
4,000
2,200
77,000
5,000
In addition, we lease several sales offices in various locations throughout the United States and in Les Ulis, France; Shanghai, China; and
Langenselbold, Germany to support our sales activities.
We believe that as the term for each of our leased facilities expires we will be able to either secure a renewal or enter into a lease for an alternate
location on market terms.
We believe that our existing facilities and equipment are generally in good condition, are well maintained and adequate to carry on our current
operations. We also believe that our existing manufacturing facilities have sufficient capacity to meet increased customer demand.
ITEM 3. LEGAL PROCEEDINGS
From time to time, we are involved in litigation and administrative proceedings that arise in the ordinary course of our business. We do not believe
that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse effect on our
business, financial condition, operating results, cash flow or prospects.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
16
ITEM 4A. EXECUTIVE OFFICERS OF THE REGISTRANT
Our executive officers are appointed by the Board normally for a term of one year and/or until the appointment of their successors. All executive
officers have been employed by the Company at their current positions during the past five-year period except as noted below. Our executive officers as of
May 14, 2021 are as follows:
Name
Michael J. Hartnett
Daniel A. Bergeron
Patrick S. Bannon
Richard J. Edwards
John J. Feeney
Robert M. Sullivan
Age
75
61
56
65
52
37
Year
Appointed
Current Position and Previous Positions During Last Five Years
1992
Chairman, President and Chief Executive Officer.
2003
2017
Director, Vice President and Chief Operating Officer. Prior thereto, served as
the Company’s Vice President, Chief Operating Officer and Chief Financial
Officer from 2017 to 2020. Prior thereto, served as Vice President and Chief
Financial Officer from 2003 to 2017.
Appointed Vice President and General Manager in 2017. Prior thereto,
served as the Company’s General Manager of its Aircraft Products, Mexico
and AeroStructures operations and has been with the Company in various
positions for 26 years.
1996
Vice President and General Manager.
2020
2020
Appointed Vice President, General Counsel and Secretary in October
2020. Prior thereto, served as the Company’s Assistant General Counsel
from 2014 to 2020.
Appointed Vice President and Chief Financial Officer in October 2020. Prior
thereto, served as Corporate Controller from 2017 to 2020. Prior thereto,
served as the Company’s Assistant Corporate Controller from 2016 to 2017.
17
PART II
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF
EQUITY SECURITIES
Price range of our Common Stock
Our common stock is quoted on the Nasdaq National Market under the symbol “ROLL.” As of May 14, 2021, there was one holder of record of
our common stock.
The following table shows the high and low sales prices of our common stock as reported by the Nasdaq National Market during the periods
indicated:
First Quarter
Second Quarter
Third Quarter
Fourth Quarter
Fiscal 2021
Fiscal 2020
High
Low
High
Low
$
159.04 $
145.55
184.83
206.64
103.09 $
113.40
114.49
160.51
167.47 $
171.54
174.94
185.06
125.30
149.98
152.55
77.63
The last reported sale price of our common stock on the Nasdaq National Market on May 14, 2021 was $196.87 per share.
Issuer Purchases of Equity Securities
In 2019, our Board of Directors authorized us to repurchase up to $100.0 million of our common stock from time to time on the open market, in
block trade transactions, and through privately negotiated transactions, in compliance with SEC Rule 10b-18 depending on market conditions, alternative
uses of capital, and other relevant factors. Purchases may be commenced, suspended, or discontinued at any time without prior notice.
Total share repurchases under the 2019 plan for the three months ended April 3, 2021 are as follows:
Period
12/27/2020 – 01/30/2021
01/31/2021 – 02/27/2021
02/28/2021 – 04/3/2021
Total
Approximate
dollar value
of shares still
available
to be
purchased
under the
program
(000’s)
Number of
shares
purchased
as part of the
publicly
announced
program
Total number
of shares
purchased
Average
price paid
per share
- $
3,575
30
3,605 $
-
177.01
193.93
177.15
- $
3,575
30 $
3,605
88,218
87,585
87,579
During the fourth quarter of fiscal 2021, we did not issue any common stock that was not registered under the Securities Act of 1933.
Equity Compensation Plans
Information regarding equity compensation plans required to be disclosed pursuant to this Item is included in Part II, Item 8. “Financial
Statements and Supplementary Data,” Note 16 “Stockholders’ Equity-Stock Option Plans” of this Annual Report on Form 10-K.
18
Performance Graph
The following graph shows the total return to our stockholders compared to the Russell 3000 Index and the Nasdaq Composite Index over the
period from April 2, 2016 to April 3, 2021. Because of the diversity of our markets and products, we do not believe that a combination of peer issuers can
be selected on an industry or line-of-business basis to provide a meaningful basis for comparing shareholder return. Accordingly, the Russell 3000 Index,
which is comprised of issuers with generally similar market capitalizations to that of the Company, is included in the graph as permitted by applicable
regulations. Each line on the graph assumes that $100 was invested in our common stock or in the respective indices on April 2, 2016 based on the closing
price on that date. The graph then presents the value of these investments, assuming reinvestment of dividends, through the close of trading on April 3,
2021.
RBC Bearings Incorporated
Nasdaq Composite Index
Russell 3000 Index
$
100.00 $
100.00
100.00
131.83 $
121.76
117.38
168.64 $
147.04
133.59
172.67 $
162.67
145.30
149.36 $
159.56
129.94
269.03
289.02
217.35
April 2,
2016
April 1,
2017
March 31,
2018
March 30,
2019
March 28,
2020
April 3,
2021
The cumulative total return shown on the stock performance graph indicates historical results only and may not be indicative of future results.
19
ITEM 6. SELECTED FINANCIAL DATA
Not applicable.
20
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The financial and business analysis below provides information which we believe is relevant to an assessment and understanding of our
consolidated financial position, results of operations and cash flows. This financial and business analysis should be read in conjunction with the
consolidated financial statements and related notes. All references to “Notes” in this Item 7 refer to the “Notes to Consolidated Financial Statements”
included in Item 8 of this Annual Report on Form 10-K.
The following discussion contains statements reflecting our views about our future performance that constitute “forward-looking statements”
within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. See the information provided in Part I, Item
1A. “Risk Factors” of this Annual Report on Form 10-K under the heading “Cautionary Statement as to Forward-Looking Information.”
We have omitted our discussion of fiscal 2019 from this section as permitted by Regulation S-K. Discussion and analysis of our financial
condition and results of operations for fiscal 2019 can be found within Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and
Results of Operations” of our Annual Report on Form 10-K filed with the SEC on May 20, 2020.
Overview
We are a well-known international manufacturer of highly engineered precision bearings and components. Our precision solutions are integral to
the manufacture and operation of most machines and mechanical systems, reduce wear to moving parts, facilitate proper power transmission and reduce
damage and energy loss caused by friction. While we manufacture products in all major bearing categories, we focus primarily on the higher end of the
bearing market where we believe our value added manufacturing and engineering capabilities enable us to differentiate ourselves from our competitors and
enhance profitability. We believe our unique expertise has enabled us to garner leading positions in many of the product markets in which we primarily
compete. With 43 facilities in seven countries, of which 31 are manufacturing facilities, we have been able to significantly broaden our end markets,
products, customer base and geographic reach. We have a fiscal year consisting of 52 or 53 weeks, ending on the Saturday closest to March 31. Based on
this policy, fiscal year 2021 had 53 weeks and fiscal year 2020 had 52 weeks. We currently operate under four reportable business segments: Plain
Bearings; Roller Bearings; Ball Bearings; and Engineered Products. The following further describes these reportable segments:
Plain Bearings. Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes, including rod
end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are
primarily used to rectify inevitable misalignments in various mechanical components.
Roller Bearings. Roller bearings are anti-friction bearings that use rollers instead of balls. We manufacture four basic types of roller bearings:
heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.
Ball Bearings. We manufacture four basic types of ball bearings: high precision aerospace, airframe control, thin section and commercial ball
bearings which are used in high-speed rotational applications.
Engineered Products. Engineered Products consist of highly engineered hydraulics, fasteners, collets, tool holders and precision components used
in aerospace, marine and industrial applications.
Purchasers of bearings and engineered products include industrial equipment and machinery manufacturers, producers of commercial and military
aerospace equipment, agricultural machinery manufacturers, construction, energy, mining and specialized equipment manufacturers, and marine products,
automotive and commercial truck manufacturers. The markets for our products are cyclical, and we have endeavored to mitigate this cyclicality by entering
into sole-source relationships and long-term purchase agreements, through diversification across multiple market segments within the aerospace and
industrial segments, by increasing sales to the aftermarket, and by focusing on developing highly customized solutions.
21
Currently, our strategy is built around maintaining our role as a leading manufacturer of precision bearings and components through the following
efforts:
● Developing innovative solutions. By leveraging our design and manufacturing expertise and our extensive customer relationships, we
continue to develop new products for markets in which there are substantial growth opportunities.
● Expanding customer base and penetrating end markets. We continually seek opportunities to access new customers, geographic locations
and bearing platforms with existing products or profitable new product opportunities.
● Increasing aftermarket sales. We believe that increasing our aftermarket sales of replacement parts will further enhance the continuity and
predictability of our revenues and enhance our profitability. Such sales include sales to third party distributors, and sales to OEMs for
replacement products and aftermarket services. We expect to increase the percentage of our revenues derived from the replacement market by
continuing to implement several initiatives.
● Pursuing selective acquisitions. The acquisition of businesses that complement or expand our operations has been and continues to be an
important element of our business strategy. We believe that there will continue to be consolidation within the industry that may present us
with acquisition opportunities.
We have demonstrated expertise in acquiring and integrating bearing and precision engineered component manufacturers that have complementary
products or distribution channels and have provided significant margin enhancement. We have consistently increased the profitability of acquired
businesses through a process of methods and systems improvement coupled with the introduction of complementary and proprietary new products. Since
1992 we have completed 26 acquisitions, which have broadened our end markets, products, customer base and geographic reach.
Recent Significant Events
Acquisition
On August 15, 2019, the Company, through its Schaublin SA subsidiary, acquired all of the outstanding shares of Swiss Tool for a purchase price
of approximately $33.6 million (CHF 32.8 million). We have finalized the purchase price allocation with no material adjustments subsequent to March 28,
2020.
Restructuring and Consolidation
Throughout fiscal 2021, the Company consolidated certain manufacturing facilities to increase efficiencies of our operations. This resulted in $7.2
million of restructuring charges incurred during the year, including $3.1 million of inventory rationalization costs included within cost of sales, $2.0 million
of which were attributable to the Roller segment and $1.1 million of which were attributable to the Plain segment. The restructuring charges also included
$1.3 million of fixed asset disposals included within other operating costs, a $0.1 million lease impairment charge, $0.7 million of personnel-related costs
and $2.0 million of other items. Of these $4.1 million of other operating costs, $1.5 million are related to the Plain segment, $0.8 million are related to the
Roller segment, less than $0.1 million are related to the Ball segment, $1.1 million are related to the Engineered Products segment and $0.6 million are
Corporate costs. The Company secured operating lease assets obtained in exchange for new operating lease liabilities of $7.7 million as part of this
restructuring. The Company anticipates additional costs associated with these consolidation efforts of $0.3 million to $0.5 million to be incurred in the first
quarter of fiscal 2022.
Outlook
We ended fiscal 2021 with a backlog of $394.8 million compared to $478.6 million for the same period last fiscal year. Our net sales decreased
16.3% year over year due to a 24.8% decrease in sales in the aerospace markets and a 0.9% decrease in sales to the industrial markets.
The COVID-19 health crisis, which was declared a pandemic in March 2020, has led to governments around the world implementing measures to
reduce the spread. These measures include quarantines, “shelter in place” orders, travel restrictions, and other measures and have resulted in a slowdown of
worldwide economic activity.
Our business is operating as an essential business, and as such, our facilities have remained open, with the exception of a few temporary closures
at some of our international locations. The COVID-19 pandemic impacted our commercial aerospace and industrial sales in fiscal 2021. Our commercial
aerospace sales continue to face headwinds associated with build rate changes within the industry, while the general decline in global economic activity has
had an impact on the industrial markets.
22
Our production and sales have been negatively affected by the economic implications of the pandemic. We anticipate that our production and sales
in fiscal 2022 will continue to be affected by the economic implications of the pandemic. The commercial aerospace OEM and aftermarket will continue to
be impacted by reduced air travel and changes in production rates in the first half of fiscal 2022, but are expected to grow over the next year. Our sales to
defense markets are expected to continue to improve in the second half of the fiscal year. Our sales to industrial markets have begun to show signs of
recovery, growing 12.9% in the fourth quarter of fiscal 2021 as compared to the same period last year, and are expected to continue to improve throughout
the course of the next fiscal year. We expect to see demand increasing as “shelter in place” directives are eliminated. Management is continuously
evaluating the status of our orders and operations, and restructuring efforts have been implemented where necessary to align our cost structure to the new
demand levels we experience in the marketplace.
We experienced strong cash flow generation during fiscal 2021 (as discussed in the section “Liquidity and Capital Resources” below). We expect
this trend to continue during fiscal 2022. Management believes that these operating cash flows and available credit under all credit agreements will provide
adequate resources to fund internal and external growth initiatives for the foreseeable future, including at least the next 12 months. As of April 3, 2021, we
had cash and cash equivalents and highly liquid marketable securities of $241.3 million of which approximately $13.9 million was cash held by our foreign
operations.
Sources of Revenue
A contract with a customer exists when there is commitment and approval from both parties involved, the rights of the parties are identified,
payment terms are defined, the contract has commercial substance and collectability of consideration is probable. The Company has determined that the
contract with the customer is established when the customer purchase order is accepted or acknowledged. Long-term agreements (LTAs) are used by the
Company and certain of its customers to reduce their supply uncertainty for a period of time, typically multiple years. While these LTAs define commercial
terms including pricing, termination rights and other contractual requirements, they do not represent the contract with the customer for revenue recognition
purposes.
Approximately 96% and 95% of the Company’s revenue was generated from the sale of products to customers in the industrial and aerospace
markets for each of the years ended April 3, 2021 and March 28, 2020, respectively. During fiscal 2021, approximately 4% of the Company’s revenue was
derived from services performed for customers, which included repair and refurbishment work performed on customer-controlled assets as well as design
and test work, compared to approximately 5% for fiscal 2020.
Refer to Note 2 – “Summary of Significant Accounting Policies” for further discussion regarding the Company’s revenue policy.
Cost of Sales
Cost of sales includes employee compensation and benefits, raw materials, outside processing, depreciation of manufacturing machinery and
equipment, supplies and manufacturing overhead.
Approximately 20% to 30% of our costs, depending on product mix, are attributable to raw materials, purchased components and outside
processing. When we experience raw material inflation, we offset these cost increases by changing our buying patterns, expanding our vendor network and
passing through price increases when possible. The overall impact on raw material costs for this fiscal year was not material as a percent change on a year-
over-year basis.
We monitor gross margin performance through a process of monthly operation reviews with all our divisions. We develop new products to target
certain markets allied to our strategies by first understanding volume levels and product pricing and then constructing manufacturing strategies to achieve
defined margin objectives. We only pursue product lines where we believe that the developed manufacturing process will yield the targeted margins.
Management monitors gross margins of all product lines on a monthly basis to determine which manufacturing processes or prices should be adjusted.
23
Fiscal 2021 Compared to Fiscal 2020
Results of Operations
Net sales
Net income
Net income per common share: Diluted
Weighted average common shares: Diluted
FY21
FY20
$ Change
% Change
$
$
$
609.0 $
89.6 $
3.58 $
25,048,451
727.5 $
126.0 $
5.06
24,922,631
(118.5)
(36.4)
(16.3)%
(28.9)%
Net sales for the twelve months ended April 3, 2021 decreased $118.5 million, or 16.3%, for fiscal 2021 compared to fiscal 2020. This was mainly
the result of a 24.8% decrease in net sales to the aerospace markets and a decrease of 0.9% in the industrial markets. The decrease in aerospace sales during
the year was primarily driven by reduced air travel and changes to production rates within the industry. This reduction in commercial aerospace was
partially offset by increases in our defense OEM and aftermarket business. The slight decrease in industrial sales year over year was due primarily to
mining and energy markets, which was partially offset by increases in semiconductor, military vehicles, wind, nuclear, and our marine business. Further,
our industrial sales evidenced growth during the fourth quarter of fiscal 2021, which provides a positive indication of recovery in the market.
Net income decreased by $36.4 million to $89.6 million for fiscal 2021 compared to fiscal 2020. The year-over-year decrease was primarily driven
by decreased sales volume during fiscal 2021. The net income of $89.6 million in fiscal 2021 was impacted by $5.8 million of after-tax costs associated
with restructuring, $1.3 million of after-tax costs associated with the cyber event, and $0.2 million of losses on foreign exchange, partially offset by $3.1
million of tax benefits associated with share-based compensation. The net income of $126.0 million in fiscal 2020 was impacted by $1.1 million of after-
tax gain on the sale of our Houston facility, and $5.9 million of discrete tax benefits including share-based compensation, partially offset by $1.1 million of
after-tax costs associated with the acquisition of Swiss Tool, $0.8 million of restructuring and integration costs, and $0.7 million of loss on foreign
exchange.
Gross Margin
Gross Margin
Gross Margin %
FY21
FY20
$ Change
% Change
$
234.1
$
38.4%
289.1
$
39.7%
(55.0)
(19.0)%
Gross margin decreased $55.0 million, or 19.0%, for fiscal 2021 compared to the same period last fiscal year. The decrease in gross margin was
mainly driven by decreased volume, partially offset by cost efficiencies achieved during the current period related to restructuring and consolidation efforts.
Gross margins in fiscal 2021 were impacted by $3.1 million of inventory rationalization costs associated with the consolidation of certain manufacturing
facilities and $0.8 million of capacity inefficiencies driven by the decrease in volume. Gross margins in fiscal 2020 were impacted by $0.4 million of
purchase accounting adjustments associated with the acquisition of Swiss Tool.
Selling, General and Administrative
SG&A
% of net sales
FY21
FY20
$ Change
% Change
$
106.0
$
17.4%
122.6
$
16.8%
(16.6)
(13.5)%
SG&A expenses decreased by $16.6 million to $106.0 million for fiscal 2021 compared to fiscal 2020. This decrease was primarily due to $16.5
million of reduced personnel-related costs and $0.1 million of other items.
24
Other, Net
Other, net
% of net sales
FY21
FY20
$ Change
% Change
$
$
16.7
2.7%
$
9.8
1.3%
6.9
70.7%
Other operating expenses for fiscal 2021 totaled $16.7 million compared to $9.8 million for fiscal 2020. For fiscal 2021, other operating expenses
were comprised of $10.2 million of amortization of intangible assets, $2.9 million of restructuring and consolidation costs, $1.5 million of forensic
specialist and remediation costs related to a cyber event, $1.3 million loss on disposal of assets, $0.5 million of bad debt expense, and $0.3 million of other
items. For fiscal 2020, other operating expenses were comprised of $9.6 million of amortization of intangible assets, $0.9 million of acquisition costs, and
$1.0 million of restructuring costs, partially offset by $1.2 million of gain on disposal of assets and $0.5 million of other income.
Interest Expense, Net
Interest expense
% of net sales
FY21
FY20
$ Change
% Change
$
1.4
$
0.2%
1.9
$
0.3%
(0.5)
(24.1)%
Interest expense, net, generally consists of interest charged on our debt and amortization of debt issuance costs offset by interest income (see
“Liquidity and Capital Resources – Liquidity” below). Interest expense, net was $1.4 million for fiscal 2021 compared to $1.9 million for fiscal 2020. This
included amortization of debt issuance costs of $0.5 million for fiscal 2021 and $0.5 million for fiscal 2020. The decrease in interest expense is a result of
the Company having substantially less outstanding debt throughout fiscal 2021 compared to 2020.
Other Non-Operating Expense
Other non-operating expense
% of net sales
FY21
FY20
$ Change
% Change
$
$
(0.0)
(0.0)%
$
0.8
0.1%
(0.8)
(104.1)%
Other non-operating expense for fiscal 2020 totaled $0.8 million, consisting primarily of $1.0 million associated with loss on foreign exchange
partially offset by $0.2 million of other non-operating income.
Income Taxes
Income tax expense
Effective tax rate with discrete items
Effective tax rate without discrete items
$
FY21
FY20
$
20.4
18.6%
20.6%
28.1
18.2%
22.1%
Income tax expense for fiscal 2021 was $20.4 million compared to $28.1 million for fiscal 2020. Our effective income tax rate for fiscal 2021 was
18.6% compared to 18.2% for fiscal 2020. The effective income tax rates are different from the U.S. statutory rate due to the U.S. credits for increasing
research activities and foreign-derived intangible income provision which decrease the rate and differences in foreign and state income taxes which
increase the rate. The effective income tax rate for fiscal 2021 of 18.6% included discrete items of $2.2 million benefit which are comprised substantially of
a benefit associated with share-based compensation and unrecognized tax benefits associated with the expiration of statutes of limitations. The effective
income tax rate for fiscal 2021 without these discrete items would have been 20.6%. The effective income tax rate for fiscal 2020 of 18.2% includes
discrete items of $5.9 million benefit which are comprised substantially of a benefit associated with share-based compensation, tax benefit of other
permanent adjustments from filing the Company’s tax returns and unrecognized tax benefits associated with the expiration of statutes of limitations. The
effective income tax rate for fiscal 2020 without these discrete items would have been 22.1%.
25
Segment Information
We have four reportable product segments: Plain Bearings, Roller Bearings, Ball Bearings and Engineered Products. We use net sales and gross
margin as the primary measurement to assess the financial performance of each reportable segment.
Plain Bearing Segment:
Net sales
Gross margin
Gross margin %
SG&A
% of segment net sales
$
$
$
FY21
FY20
$ Change
% Change
294.0
$
358.3
$
(64.3)
(17.9)%
118.5
$
40.3%
21.6
$
7.4%
145.0
$
40.5%
26.3
$
7.3%
(26.5)
(18.2)%
(4.7)
(17.6)%
Net sales decreased $64.3 million, or 17.9%, for fiscal 2021 compared to fiscal 2020. Total industrial sales were $83.8 million, which increased
3.9% from $80.7 million in fiscal 2020. The increase was driven by energy and certain general industrial markets. Aerospace sales were $210.2 million,
down 24.3% from sales of $277.6 million in fiscal 2020. The decrease was driven by reductions in our commercial aerospace OEM and aftermarket
business, offset by year over year increases in our defense OEM business.
Gross margin was $118.5 million, or 40.3% of sales, in fiscal 2021 compared to $145.0 million, or 40.5% of sales, for the same period in fiscal
2020. Approximately $1.1 million of inventory rationalization costs associated with the consolidation of certain manufacturing facilities impacted gross
margin during fiscal 2021.
Roller Bearing Segment:
Net sales
Gross margin
Gross margin %
SG&A
% of segment net sales
$
$
$
FY21
FY20
$ Change
% Change
91.7
$
132.6
$
(40.9)
(30.9)%
$
31.6
34.5%
4.7
$
5.2%
$
55.5
41.9%
6.4
$
4.8%
(23.9)
(43.1)%
(1.7)
(25.4)%
Net sales decreased $40.9 million, or 30.9%, during fiscal 2021 compared to the same period last year. Total industrial sales were $48.2 million,
which were down 21.4% from sales of $61.2 million in fiscal 2020. The decrease in industrial sales was driven primarily by the energy and mining
markets. Total aerospace sales were $43.5 million as compared to $71.4 million in fiscal 2020. The 39.1% reduction was driven primarily by reduced air
travel and the impact of changes in the build rates of commercial aircraft.
The Roller Bearings segment achieved a gross margin of $31.6 million, or 34.5% of sales, in fiscal 2021 compared to $55.5 million, or 41.9% of
sales, in fiscal 2020. Approximately $2.0 million of inventory rationalization costs associated with the consolidation of certain manufacturing facilities and
$0.3 million of capacity inefficiencies driven by the impact of the COVID-19 pandemic impacted gross margins during fiscal 2021. The remaining decrease
in gross margin was due to decreased volume and product mix during the period.
26
Ball Bearing Segment:
Net sales
Gross margin
Gross margin %
SG&A
% of segment net sales
FY21
FY20
$ Change
% Change
$
$
$
83.7
$
74.2
$
37.1
$
44.3%
5.4
$
6.4%
33.0
$
44.5%
6.5
$
8.7%
9.5
4.1
12.8%
12.2%
(1.1)
(17.4)%
Net sales increased $9.5 million, or 12.8%, for fiscal 2021 compared to fiscal 2020. Total industrial sales were $55.5 million, which increased
9.2% from sales of $50.8 million in fiscal 2020. The increase in industrial sales was driven primarily by the semiconductor and general industrial markets.
Total aerospace sales were $28.2 million, which increased 20.5% from sales of $23.4 million in fiscal 2020. The increase in aerospace sales was driven by
strength in the defense OEM market during the year.
Gross margin for the year was $37.1 million, or 44.3% of sales, compared to $33.0 million, or 44.5% of sales, during fiscal 2020. This change
resulted from cost efficiencies achieved during the year.
Engineered Products Segment:
Net sales
Gross margin
Gross margin %
SG&A
% of segment net sales
$
$
$
FY21
FY20
$ Change
% Change
139.6
$
162.3
$
(22.7)
(14.0)%
46.9
$
33.6%
15.4
$
11.0%
55.6
$
34.2%
17.7
$
10.9%
(8.7)
(15.6)%
(2.3)
(13.3)%
Net sales decreased $22.7 million, or 14.0%, in fiscal 2021 compared to the same period last fiscal year. Total industrial sales were $68.4 million,
an increase of 4.5% as compared to sales of $65.5 million in fiscal 2020. The increase in sales year over year was driven by growth in the marine market.
Total aerospace sales were $71.2 million as compared to $96.8 million in fiscal 2020. The decrease, year over year, was driven by reduced air travel and the
impact of changes in production schedules of commercial aircraft.
Gross margin for the year was $46.9 million, or 33.6% of sales compared to $55.6 million or 34.2% of sales during fiscal 2020. Gross margin in
fiscal 2021 was impacted by approximately $0.5 million of capacity inefficiencies driven by the impact of the COVID-19 pandemic.
Corporate:
SG&A
% of total net sales
FY21
FY20
$ Change
% Change
$
58.9
$
9.7%
65.7
$
9.0%
(6.8)
(10.4)%
Corporate SG&A decreased $6.8 million or 10.4% for fiscal 2021 compared to fiscal 2020. This was due to reductions in personnel-related costs
of $8.2 million and other costs of $0.4 million partially offset by increases in share-based compensation expense of $1.1 million and professional fees of
$0.7 million.
27
Liquidity and Capital Resources
Our business is capital-intensive. Our capital requirements include manufacturing equipment and materials. In addition, we have historically
fueled our growth, in part, through acquisitions. We have historically met our working capital, capital expenditure requirements and acquisition funding
needs through our net cash flows provided by operations, various debt arrangements and sale of equity to investors. We believe that operating cash flows
and available credit under the Revolver and Foreign Revolver (see below) will provide adequate resources to fund internal and external growth initiatives
for the foreseeable future.
Our ability to meet future working capital, capital expenditures and debt service requirements will depend on our future financial performance,
which will be affected by a range of economic, competitive and business factors, particularly the COVID-19 pandemic, interest rates, cyclical changes in
our end markets, and prices for steel and our ability to pass through price increases on a timely basis, many of which are outside of our control. In addition,
future acquisitions could have a significant impact on our liquidity position and our need for additional funds.
From time to time, we evaluate our existing facilities and operations and their strategic importance to us. If we determine that a given facility or
operation does not have future strategic importance, we may sell, partially or completely, relocate production lines, consolidate or otherwise dispose of
those operations. Although we believe our operations would not be materially impaired by such dispositions, relocations or consolidations, we could incur
significant cash or non-cash charges in connection with them.
Liquidity
As of April 3, 2021, we had cash and cash equivalents and highly liquid marketable securities of $241.3 million, of which, approximately $13.9
million was cash held by our foreign operations. We expect that our undistributed foreign earnings will be re-invested indefinitely for working capital,
internal growth and acquisitions for and by our foreign subsidiaries.
Domestic Credit Facility
The Company’s credit agreement with Wells Fargo Bank, National Association, as Administrative Agent, Collateral Agent, Swingline Lender and
Letter of Credit Issuer, and the other lenders party thereto (the “Credit Agreement”) provides the Company with a $250.0 million revolving credit facility
(the “Revolver”), which expires on January 31, 2024. Debt issuance costs associated with the Credit Agreement totaled $0.9 million and will be amortized
through January 31, 2024 along with the unamortized debt issuance costs remaining from the Company’s prior credit agreement. As of April 3, 2021, $1.1
million in unamortized debt issuance costs remain.
Amounts outstanding under the Revolver generally bear interest at (a) a base rate determined by reference to the higher of (1) Wells Fargo’s prime
lending rate, (2) the federal funds effective rate plus 1/2 of 1% and (3) the one-month LIBOR rate plus 1%, or (b) LIBOR plus a specified margin,
depending on the type of borrowing being made. The applicable margin is based on the Company’s consolidated ratio of total net debt to consolidated
EBITDA at each measurement date. Currently, the Company’s margin is 0.00% for base rate loans and 0.75% for LIBOR loans.
The Credit Agreement requires the Company to comply with various covenants including, among other things, a financial covenant to maintain a
ratio of consolidated net debt to adjusted EBITDA not greater than 3.50 to 1. The Credit Agreement allows the Company to, among other things, make
distributions to shareholders, repurchase its stock, incur other debt or liens, or acquire or dispose of assets provided that the Company complies with certain
requirements and limitations of the Credit Agreement. As of April 3, 2021, the Company was in compliance with all such covenants.
The Company’s domestic subsidiaries have guaranteed the Company’s obligations under the Credit Agreement, and the Company’s obligations
and the domestic subsidiaries’ guarantee are secured by a pledge of substantially all of the domestic assets of the Company and its domestic subsidiaries.
Approximately $3.5 million of the Revolver is being utilized to provide letters of credit to secure the Company’s obligations relating to certain
insurance programs. The Company has the ability to borrow up to an additional $246.5 million under the Revolver as of April 3, 2021.
28
Foreign Term Loan and Revolving Credit Facility
On August 15, 2019, one of our foreign subsidiaries, Schaublin SA (“Schaublin”), entered into two separate credit agreements (the “Foreign
Credit Agreements”) with Credit Suisse (Switzerland) Ltd. to finance the acquisition of Swiss Tool and provide future working capital. The Foreign Credit
Agreements provided Schaublin with a CHF 15.0 million (approximately $15.4 million) term loan (the “Foreign Term Loan”), which expires on July 31,
2024 and a CHF 15.0 million (approximately $15.4 million) revolving credit facility (the “Foreign Revolver”), which continues in effect until terminated
by either Schaublin or Credit Suisse. Debt issuance costs associated with the Foreign Credit Agreements totaled CHF 0.3 million (approximately $0.3
million) and will be amortized throughout the life of the Foreign Credit Agreements. As of April 3, 2021, approximately $0.1 million in unamortized debt
issuance costs remain.
Amounts outstanding under the Foreign Term Loan and the Foreign Revolver generally bear interest at LIBOR plus a specified margin. The
applicable margin is based on Schaublin’s ratio of total net debt to consolidated EBITDA at each measurement date. Currently, Schaublin’s margin is
1.00%.
The Foreign Credit Agreements require Schaublin to comply with various covenants, which are tested annually on March 31. These covenants
include, among other things, a financial covenant to maintain a ratio of consolidated net debt to adjusted EBITDA not greater than 2.50 to 1 as of March
31, 2021 and thereafter. Schaublin is also required to maintain an economic equity of CHF 20.0 million at all times. The Foreign Credit Agreements allow
Schaublin to, among other things, incur other debt or liens and acquire or dispose of assets provided that Schaublin complies with certain requirements and
limitations of the Foreign Credit Agreements. As of April 3, 2021, Schaublin was in compliance with all such covenants.
Schaublin’s parent company, Schaublin Holding, has guaranteed Schaublin’s obligations under the Foreign Credit Agreements. Schaublin
Holding’s guaranty and the Foreign Credit Agreements are secured by a pledge of the capital stock of Schaublin. In addition, the Foreign Term Loan is
secured with pledges of the capital stock of the top company and the three operating companies in the Swiss Tool group of companies.
As of April 3, 2021, there was approximately $11.7 million outstanding under the Foreign Term Loan and no amounts outstanding under the
Foreign Revolver. These borrowings have been classified as Level 2 of the valuation hierarchy. Schaublin has the ability to borrow up to an additional
$15.9 million under the Foreign Revolver as of April 3, 2021.
Schaublin’s required future annual principal payments are approximately $2.1 million for fiscal 2022, $3.2 million for both fiscal 2023 and fiscal
2024 and $3.2 million for fiscal 2025.
Other Notes Payable
On October 1, 2012, Schaublin purchased the land and building that it occupied and had been leasing for approximately $14.9 million. Schaublin
obtained a 20-year fixed-rate mortgage of approximately $9.9 million at an interest rate of 2.9%. The balance of the purchase price of approximately $5.1
million was paid from cash on hand. The balance on this mortgage as of April 3, 2021 was approximately $5.7 million.
The Company’s required future annual principal payments for the next five years are $0.5 million for each year from fiscal 2022 through fiscal
2026 and $3.2 million thereafter.
Cash Flows
Fiscal 2021 Compared to Fiscal 2020
The following table summarizes our cash flow activities:
Net cash provided by (used in):
Operating activities
Investing activities
Financing activities
Effect of exchange rate changes on cash
Increase in cash and cash equivalents
FY21
FY20
$ Change
$
$
152.4 $
(101.5)
(3.4)
0.3
47.8 $
155.6 $
(62.8)
(20.3)
0.9
73.4 $
(3.2)
(38.7)
16.9
(0.6)
(25.6)
29
During fiscal 2021 we generated cash of $152.4 million from operating activities compared to $155.6 million for fiscal 2020. The decrease of $3.2
million for fiscal 2021 was mainly the result of a $36.4 million decrease in net income partially offset by a net change in operating assets and liabilities of
$31.1 million and $2.1 million fewer non-cash charges. The favorable change in operating assets and liabilities is detailed in the table below. The change in
non-cash charges were primarily driven by a $2.5 million favorable change related to the disposal of assets, $2.2 million favorable change in consolidation
and restructuring charges, an additional $1.1 million in share-based compensation, $0.7 million more depreciation and $0.6 million more amortization of
intangible assets. This was partially offset by a $5.0 million decrease in deferred taxes.
The following chart summarizes the favorable change in operating assets and liabilities of $31.1 million for fiscal 2021 versus fiscal 2020 and
$29.1 million for fiscal 2020 versus fiscal 2019.
Cash provided by (used in):
Accounts receivable
Inventory
Prepaid expenses and other current assets
Other noncurrent assets
Accounts payable
Accrued expenses and other current liabilities
Other noncurrent liabilities
Total change in operating assets and liabilities
FY21
FY20
$
$
15.7 $
26.3
3.5
(7.0)
(15.7)
2.6
5.7
31.1 $
20.6
12.5
(3.4)
2.4
(5.0)
2.5
(0.5)
29.1
During fiscal 2021, we used $101.5 million for investing activities as compared to $62.8 million for fiscal 2020. This increase in cash used was
attributable to the purchase of $100.1 million of highly liquid marketable securities during the current period and $8.2 million fewer proceeds from the sale
of assets compared to the prior year when we sold a building in Houston, Texas. This was partially offset by a $25.5 million decrease in capital
expenditures, $10.0 million in proceeds received from the sale of marketable securities in the current year, the use of $33.8 million in the prior year for the
acquisition of Swiss Tool and a purchase price adjustment in the current year related to the Swiss Tool acquisition of $0.3 million.
During fiscal 2021, we used $3.4 million for financing activities compared to $20.3 million in fiscal 2020. This decrease in cash used was
primarily attributable to $38.3 million less payments made on outstanding debt, $0.3 million less financing fees paid in connection with credit facilities,
and $5.3 million less treasury stock purchases, partially offset by proceeds received from borrowings of $24.8 million for the acquisition of Swiss Tool in
the prior year and $2.2 million less exercises of share-based awards
Capital Expenditures
Our capital expenditures in fiscal 2021 were $11.8 million compared to $37.3 million in fiscal 2020. We expect to make capital expenditures of
approximately $14.0 million to $16.0 million during fiscal 2022 in connection with our existing business. We funded our fiscal 2021 capital expenditures,
and expect to fund fiscal 2022 capital expenditures, principally through existing cash and internally generated funds. We may also make substantial
additional capital expenditures in connection with acquisitions.
30
Quarterly Results of Operations
Net sales
Gross margin
Operating income
Net income
Net income per common
share:
Basic(1)(2)
Diluted(1)(2)
$
$
$
$
Apr. 3,
2021
Dec. 26,
2020
Sep. 26,
2020
Jun. 27,
2020
Mar. 28,
2020
Dec. 28,
2019
Sep. 28,
2019
Jun. 29,
2019
Quarter Ended
(Unaudited)
(in thousands, except per share data)
160,295 $
62,469
29,740
24,954 $
145,861 $
55,588
26,541
21,569 $
146,335 $
56,596
26,363
20,421 $
156,493 $
59,453
28,814
22,689 $
185,843 $
76,584
43,520
33,752 $
177,019 $
70,711
37,466
30,515 $
181,909 $
71,114
37,309
31,270 $
182,690
70,694
38,490
30,499
1.00 $
0.99 $
0.87 $
0.86 $
0.82 $
0.82 $
0.92 $
0.91 $
1.36 $
1.35 $
1.24 $
1.22 $
1.27 $
1.26 $
1.24
1.23
(1) See Note 2 “Summary of Significant Accounting Policies-Net Income Per Common Share.”
(2) Net income per common share is computed independently for each of the quarters presented. Therefore, the sum of the quarterly earnings per share
may not necessarily equal the total for the year.
Critical Accounting Policies and Estimates
Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have
been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these financial statements requires us to make
estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and related disclosure of contingent assets and
liabilities. We evaluate our estimates on an on-going basis. Estimates are used for, but not limited to, the accounting for the allowance for doubtful
accounts, valuation of inventories, goodwill and intangible assets, depreciation and amortization, income taxes and tax reserves and the valuation of
options. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the
results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We
believe our judgments related to these accounting estimates are appropriate. Actual results may differ from these estimates under different assumptions or
conditions.
Revenue Recognition. The performance obligations for the majority of RBC’s product sales are satisfied at the point in time in which the products
are shipped, consistent with the pattern of revenue recognition under the previous accounting standard. The Company has determined that the customer
obtains control upon shipment of the product based on the shipping terms (either when it ships from RBC’s dock or when the product arrives at the
customer’s dock) and recognizes revenue accordingly. Once a product has shipped, the customer is able to direct the use of, and obtain substantially all of
the remaining benefits from, the asset. Approximately 96% of the Company’s revenue was recognized in this manner based on sales for the year ended
April 3, 2021 compared to approximately 95% for the year ended March 28, 2020.
31
The Company has determined performance obligations are satisfied over time for customer contracts where RBC provides services to customers
and also for a limited number of product sales. RBC has determined revenue recognition over time is appropriate for our service revenue contracts as they
create or enhance an asset that the customer controls throughout the duration of the contract. Approximately 4% of the Company’s revenue was recognized
in this manner based on sales for the year ended April 3, 2021 compared to approximately 5% for the year ended March 28, 2020. Revenue recognition
over time is appropriate for customer contracts with product sales in which the product sold has no alternative use to RBC without significant economic
loss and an enforceable right to payment exists, including a normal profit margin from the customer, in the event of contract termination. These types of
contracts comprised less than 1% of total sales for the year ended April 3, 2021 and the year ended March 28, 2020. For both of these types of contracts,
revenue is recognized over time based on the extent of progress towards completion of the performance obligation. The Company utilizes the cost-to-cost
measure of progress for over-time revenue recognition contracts as we believe this measure best depicts the transfer of control to the customer, which
occurs as we incur costs on contracts. Revenues, including profits, are recorded proportionally as costs are incurred. Costs to fulfill include labor, materials,
subcontractors’ costs, and other direct and indirect costs.
Pursuant to the over-time revenue recognition model, revenue may be recognized prior to the customer being invoiced. An unbilled receivable is
recorded to reflect revenue that is recognized when (1) the cost-to-cost method is applied and (2) such revenue exceeds the amount invoiced to the
customer. Contract assets are included within prepaid expenses and other current assets or other assets on the consolidated balance sheets.
Accounts Receivable. We are required to estimate the collectability of our accounts receivable, which requires a considerable amount of judgment
in assessing the ultimate realization of these receivables, including the current credit-worthiness of each customer. Changes in required reserves may occur
in the future as conditions in the marketplace change.
Inventory. Inventories are stated at the lower of cost or net realizable value. Cost is determined by the first-in, first-out method. We account for
inventory under a full absorption method. We record adjustments to the value of inventory based upon past sales history and forecasted plans to sell our
inventories. The physical condition, including age and quality, of the inventories is also considered in establishing its valuation. These adjustments are
estimates, which could vary significantly, either favorably or unfavorably, from actual requirements if future economic conditions, customer inventory
levels or competitive conditions differ from our expectations.
Goodwill and Indefinite-Lived Intangible Assets. Goodwill (representing the excess of the amount paid to acquire a company over the estimated
fair value of the net assets acquired) and indefinite lived intangible assets are not amortized but instead are tested for impairment annually, or when events
or circumstances indicate that the carrying value of such asset may not be recoverable. Separate tests are performed for goodwill and indefinite lived
intangible assets. We completed a quantitative test of impairment on the indefinite lived intangible assets with no impairment noted in the current year. The
determination of any goodwill impairment is made at the reporting unit level. The Company determines the fair value of a reporting unit and compares it to
its carrying amount. If the carrying amount of the reporting unit exceeds its fair value, an impairment loss is recognized for any amount by which the
carrying amount exceeds the reporting unit’s fair value up to the value of goodwill. The Company applies the income approach (discounted cash flow
method) in testing goodwill for impairment. The key assumptions used in the discounted cash flow method used to estimate fair value include discount
rates, revenue growth rates, terminal growth rates and cash flow projections. Discount rates, revenue growth rates and cash flow projections are the most
sensitive and susceptible to change as they require significant management judgment. Discount rates are determined by using a weighted average cost of
capital (“WACC”). The WACC considers market and industry data as well as Company-specific risk factors for each reporting unit in determining the
appropriate discount rate to be used. The discount rate utilized for each reporting unit for our fiscal 2021 test was 9.5% and is indicative of the return an
investor would expect to receive for investing in such a business. Terminal growth rate determination follows common methodology of capturing the
present value of perpetual cash flow estimates beyond the last projected period assuming a constant WACC and long-term growth rates. The terminal
growth rate used for our fiscal 2021 test was 2.5%. The Company has determined that, to date, no impairment of goodwill exists and fair value of the
reporting units exceeded the carrying value in total by approximately 137.4%. The fair value of the reporting units exceeds the carrying value by a
minimum of 49.2% at each of the four reporting units. A decrease of 1.0% in our terminal growth rate would not result in impairment of goodwill for any
of our reporting units. An increase of 1.0% in our discount rate would not result in impairment of goodwill for any of our reporting units. The Company
performs the annual impairment testing during the fourth quarter of each fiscal year. Although no changes are expected, if the actual results of the Company
are less favorable than the assumptions the Company makes regarding estimated cash flows, the Company may be required to record an impairment charge
in the future.
Income Taxes. As part of the process of preparing the consolidated financial statements, we are required to estimate the income taxes in each
jurisdiction in which we operate. This process involves estimating the actual current tax liabilities together with assessing temporary differences resulting
from the differing treatment of items for tax and financial reporting purposes. These differences result in deferred tax assets and liabilities, which are
included in the consolidated balance sheets. We must then assess the likelihood that the deferred tax assets will be recovered, and to the extent that we
believe that recovery is not more than likely, we are required to establish a valuation allowance. If a valuation allowance is established or increased during
any period, we are required to include this amount as an expense within the tax provision in the consolidated statements of operations. Significant judgment
is required in determining our provision for income taxes, deferred tax assets and liabilities, accrual for uncertain tax positions and any valuation allowance
recognized against net deferred tax assets.
32
Stock-Based Compensation. We recognize compensation cost relating to all share-based payment transactions in the financial statements based
upon the grant-date fair value of the instruments issued over the requisite service period.
The fair value for our options was estimated at the date of grant using the Black-Scholes option pricing model with the following weighted-
average assumptions:
Dividend yield
Expected weighted-average life (yrs.)
Risk-free interest rate
Expected volatility
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
0.00%
5.0
0.35%
41.35%
0.00%
5.0
1.82%
26.93%
0.00%
5.0
2.77%
25.16%
The Black-Scholes option pricing model was developed for use in estimating the fair value of traded options which have no vesting restrictions
and are fully transferable. In addition, option valuation models require the input of highly subjective assumptions, including the expected stock price
volatility. Because our options have characteristics significantly different from those of traded options, and because changes in the subjective input
assumptions can materially affect the fair value estimate, the existing models do not necessarily provide a reliable single measure of the fair value of our
options.
33
Recent Accounting Pronouncements
For a discussion of recent accounting pronouncements, see Note 2 - “Summary of Significant Accounting Policies – Recent Accounting
Pronouncements.”
Impact of Inflation, Changes in Prices of Raw Materials and Interest Rate Fluctuations
In fiscal 2021, inflation in the economy as a whole has not significantly affected our operations. We started to experience inflation in our fourth
quarter. We purchase steel at market prices, which fluctuate as a result of supply and demand in the marketplace. To date, we have managed price increases
by changing our buying patterns, expanding our vendor network, and passing increases on to our customers through price increases on our products, the
assessment of steel surcharges on our customers, or entry into long-term agreements with our customers containing escalator provisions tied to our invoiced
price of steel. However, even if we are able to pass these steel surcharges or price increases to our customers, there may be a time lag of several months
between the time a price increase goes into effect and our ability to implement surcharges or price increases, particularly for orders already in our backlog.
As a result, our gross margin percentage may decline.
Competitive pressures and the terms of certain of our long-term contracts may require us to absorb at least part of these cost increases, particularly
during periods of high inflation. Our principal raw materials are stainless and 52100 wire and rod steel (types of high alloy steel), which have historically
been readily available. We have never experienced a work stoppage due to a supply shortage. We maintain multiple sources for raw materials including
steel and have various supplier agreements. Through sole-source arrangements, supplier agreements and pricing, we have been able to minimize our
exposure to fluctuations in raw material prices.
Our suppliers and sources of raw materials are based in the U.S., Europe and Asia. We believe that our sources are adequate for our needs in the
foreseeable future, that there exist alternative suppliers for our raw materials and that in most cases readily available alternative materials can be used for
most of our raw materials.
Off-Balance Sheet Arrangements
As of April 3, 2021, we had no significant off-balance sheet arrangements other than $3.5 million of outstanding standby letters of credit, all of
which were under the Revolver.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to market risks, which arise during the normal course of business from changes in interest rates and foreign currency exchange
rates.
Interest Rates. We have exposure to risk associated with interest rates on the Revolver. See “Liquidity and Capital Resources” in Item 7 of this
Annual Report on Form 10-K.
Foreign Currency Exchange Rates. Our Swiss operations utilize the Swiss franc as the functional currency, our French and German operations
utilize the euro as the functional currency, and our Polish operations utilize the Polish zloty as the functional currency. As a result, we are exposed to risk
associated with fluctuating currency exchange rates between the U.S. dollar and these currencies. Foreign currency transaction gains and losses are
included in earnings. Approximately 9% of our net sales were impacted by foreign currency fluctuations in fiscal 2021 compared to approximately 9% of
our net sales in fiscal 2020. We expect that this proportion is likely to increase as we seek to increase our penetration of foreign markets, particularly within
the aerospace and defense markets. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to
another within the group, and to foreign-currency-denominated trade receivables. Unrealized currency translation gains and losses are recognized upon
translation of the foreign operations’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency
exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our earnings. We periodically enter into
derivative financial instruments in the form of forward exchange contracts to reduce the effect of fluctuations in exchange rates on certain third-party sales
transactions denominated in non-functional currencies. Based on the accounting guidance related to derivatives and hedging activities, we record derivative
financial instruments at fair value. For derivative financial instruments designated and qualifying as cash flow hedges, the effective portion of the gain or
loss on these hedges is reported as a component of accumulated other comprehensive income, and is reclassified into earnings when the hedged transaction
affects earnings. As of April 3, 2021, we had no derivatives.
34
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of RBC Bearings Incorporated
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of RBC Bearings Incorporated (the Company) as of April 3, 2021 and March 28,
2020, the related consolidated statements of operations, comprehensive income, stockholders’ equity and cash flows for each of the three years in the
period ended April 3, 2021, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated
financial statements present fairly, in all material respects, the financial position of the Company at April 3, 2021 and March 28, 2020 and the results of its
operations and its cash flows for each of the three years in the period ended April 3, 2021, in conformity with U.S. generally accepted accounting
principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the
Company’s internal control over financial reporting as of April 3, 2021, based on criteria established in Internal Control-Integrated Framework issued by
the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated May 21, 2021 expressed an unqualified
opinion thereon.
Basis for Opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s
financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the
Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the
PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain
reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included
performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures
that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial
statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the
overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated
or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2)
involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion
on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion
on the critical audit matter or on the account or disclosures to which it relates.
Description of the
Matter
How We Addressed
the Matter in Our
Audit
Valuation of Goodwill – Annual impairment evaluation
At April 3, 2021, the Company’s goodwill was $277.5 million. As discussed in Notes 2 and 10 of the consolidated financial
statements, goodwill is tested for impairment at the reporting unit level annually, or when events or circumstances indicate that the
carrying value of such asset may not be recoverable. The estimates of fair value of a reporting unit are determined using an
income approach, specifically a discounted cash flow analysis.
Auditing management’s annual goodwill impairment test was complex and highly judgmental due to the significant estimation
required to determine the fair value of the reporting units. The fair value estimates were sensitive to changes in significant
assumptions such as the discount rates, revenue growth rates and cash flow projections which are affected by expectations about
future market or economic conditions.
We obtained an understanding, evaluated the design and tested the operating effectiveness of controls over the Company’s
goodwill impairment review process, including controls over management’s review of the significant assumptions described
above.
To test the estimated fair value of the Company’s reporting units, we performed audit procedures, with the assistance of our
valuation specialists, that included, among others, assessing the methodologies utilized and testing the significant assumptions
discussed above and the underlying data used by the Company in its analysis. We compared the significant assumptions used by
management to current industry and economic trends and evaluated whether changes to the Company’s business model,
customers, products, or other factors would affect the significant assumptions. We assessed the historical accuracy of
management’s estimates and performed sensitivity analyses of significant assumptions to evaluate the changes in the fair value of
the reporting units that would result from changes in the underlying assumptions. In addition, we evaluated the reconciliation of
the fair value of the reporting units to the market capitalization of the Company.
/s/ Ernst & Young LLP
We have served as the Company’s auditor since 2002.
Stamford, Connecticut
May 21, 2021
35
RBC Bearings Incorporated
Consolidated Balance Sheets
(dollars in thousands, except share and per share data)
Current assets:
ASSETS
Cash and cash equivalents
Marketable securities
Accounts receivable, net of allowance for doubtful accounts of $1,792 at April 3, 2021 and $1,627 at March 28,
$
2020
Inventory
Prepaid expenses and other current assets
Total current assets
Property, plant and equipment, net
Operating lease assets, net
Goodwill
Intangible assets, net of accumulated amortization of $63,371 at April 3, 2021 and $55,732 at March 28, 2020
Other assets
Total assets
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable
Accrued expenses and other current liabilities
Current operating lease liabilities
Current portion of long-term debt
Total current liabilities
Long-term debt, less current portion
Long-term operating lease liabilities
Deferred income taxes
Other noncurrent liabilities
Total liabilities
Commitments and contingencies (Note 17)
Stockholders’ equity:
Preferred stock, $.01 par value; authorized shares: 10,000,000 in fiscal 2021 and fiscal 2020; none issued or
outstanding
Common stock, $.01 par value; authorized shares: 60,000,000 at April 3, 2021 and March 28, 2020, respectively;
issued shares: 26,110,320 and 25,881,415 at April 3, 2021 and March 28, 2020, respectively
Additional paid-in capital
Accumulated other comprehensive income
Retained earnings
Treasury stock, at cost, 884,701 shares and 838,982 shares at April 3, 2021 and March 28, 2020, respectively
Total stockholders’ equity
Total liabilities and stockholders’ equity
See accompanying notes.
36
$
$
$
April 3,
2021
March 28,
2020
151,086 $
90,249
103,255
—
110,472
364,147
12,248
728,202
208,264
35,664
277,536
154,399
30,195
1,434,260 $
128,995
367,494
12,262
612,006
219,846
28,953
277,776
162,747
20,584
1,321,912
36,336 $
43,564
5,726
2,612
88,238
13,495
29,982
17,178
55,416
204,309
51,038
40,580
5,708
6,429
103,755
16,583
23,396
16,560
43,619
203,913
—
—
261
445,073
(10,409)
858,852
(63,826)
1,229,951
1,434,260 $
259
412,400
(6,898)
769,219
(56,981)
1,117,999
1,321,912
Net sales
Cost of sales
Gross margin
Operating expenses:
Selling, general and administrative
Other, net
Total operating expenses
Operating income
Interest expense, net
Other non-operating expense
Income before income taxes
Provision for income taxes
Net income
Net income per common share:
Basic
Diluted
Weighted average common shares:
Basic
Diluted
RBC Bearings Incorporated
Consolidated Statements of Operations
(dollars in thousands, except share and per share data)
$
$
$
$
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
608,984 $
374,878
234,106
106,000
16,648
122,648
111,458
1,430
(31)
110,059
20,426
89,633 $
727,461 $
438,358
289,103
122,565
9,753
132,318
156,785
1,885
761
154,139
28,103
126,036 $
702,516
425,863
276,653
117,504
27,114
144,618
132,035
5,173
772
126,090
20,897
105,193
3.61 $
3.58 $
5.12 $
5.06 $
4.32
4.26
24,851,344
25,048,451
24,632,637
24,922,631
24,357,684
24,716,213
See accompanying notes.
37
RBC Bearings Incorporated
Consolidated Statements of Comprehensive Income
(dollars in thousands)
Net income
Pension and postretirement liability adjustments, net of taxes (1)
Foreign currency translation adjustments
Total comprehensive income
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
$
89,633 $
(4,538)
1,027
86,122 $
126,036 $
(861)
2,719
127,894 $
105,193
332
(5,514)
100,011
(1) These adjustments were net of a tax benefit of $911, tax benefit of $262 and tax expense of $101 in fiscal 2021, 2020 and 2019, respectively.
See accompanying notes.
38
Balance at March 31, 2018
Net income
Share-based compensation
Repurchase of common stock
Exercise of equity awards
Change in net prior service cost and
actuarial losses, net of taxes of $101
Issuance of restricted stock, net of
forfeitures
Other
Impact from adoption of ASU 2014-09
Currency translation adjustments
Balance at March 30, 2019
Net income
Share-based compensation
Repurchase of common stock
Exercise of equity awards
Change in net prior service cost and
actuarial losses, net of tax benefit of
$262
Issuance of restricted stock, net of
forfeitures
Impact from adoption of ASU 2018-02
Currency translation adjustments
Balance at March 28, 2020
Net income
Share-based compensation
Repurchase of common stock
Exercise of equity awards
Change in net prior service cost and
actuarial losses, net of tax benefit of
$911
Issuance of restricted stock, net of
forfeitures
Currency translation adjustments
Balance at April 3, 2021
RBC Bearings Incorporated
Consolidated Statements of Stockholders’ Equity
(dollars in thousands)
Additional
Accumulated
Other
Common Stock
Paid-in
Shares
25,123,694 $
—
—
—
352,552
Amount Capital
251 $
—
—
—
5
339,148 $
—
16,087
—
23,266
Comprehensive Retained
Income/(Loss) Earnings
(2,285) $
—
—
—
—
536,978
105,193
—
—
—
Treasury Stock
Amount
Total
Stockholders’
Equity
Shares
(713,687) $
—
—
(39,226)
—
(39,540) $
—
—
(5,232)
—
834,552
105,193
16,087
(5,232)
23,271
—
—
—
332
—
—
—
332
130,950
—
—
—
25,607,196 $
—
—
—
179,897
—
—
—
—
256 $
—
—
—
3
—
154
—
—
378,655 $
—
20,150
—
13,595
—
—
—
(5,514)
(7,467) $
—
—
—
—
—
—
(277)
—
641,894
126,036
—
—
—
—
—
—
—
(752,913) $
—
—
(86,069)
—
—
—
—
—
(44,772)
—
—
(12,209)
—
—
154
(277)
(5,514)
968,566
126,036
20,150
(12,209)
13,598
—
—
—
(861)
—
—
—
(861)
94,322
—
—
25,881,415 $
—
—
—
141,767
—
—
—
259 $
—
—
—
2
—
—
—
412,400 $
—
21,299
—
11,374
—
(1,289)
2,719
(6,898) $
—
—
—
—
—
1,289
—
769,219
89,633
—
—
—
—
—
—
—
—
—
(838,982) $
—
—
(45,719)
—
(56,981) $
—
—
(6,845)
—
—
—
2,719
1,117,999
89,633
21,299
(6,845)
11,376
—
—
—
(4,538)
—
—
—
(4,538)
87,138
—
26,110,320 $
—
—
261 $
—
—
445,073 $
—
1,027
(10,409) $
—
—
858,852
—
—
(884,701) $
—
—
(63,826) $
—
1,027
1,229,951
See accompanying notes.
39
RBC Bearings Incorporated
Consolidated Statements of Cash Flows
(dollars in thousands)
Cash flows from operating activities:
Net income
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation
Deferred income taxes
Amortization of intangible assets
Amortization of deferred financing costs
Consolidation and restructuring charges
Loss on extinguishment of debt
Stock-based compensation
Loss/(gain) on disposition of assets
Changes in operating assets and liabilities, net of acquisitions:
Accounts receivable
Inventory
Prepaid expenses and other current assets
Other noncurrent assets
Accounts payable
Accrued expenses and other current liabilities
Other noncurrent liabilities
Net cash provided by operating activities
Cash flows from investing activities:
Purchase of property, plant and equipment
Acquisition of businesses, net of cash acquired
Purchase of marketable securities
Proceeds from sale of marketable securities
Proceeds from sale of assets
Proceeds from sale of business
Net cash used in investing activities
Cash flows from financing activities:
Proceeds from revolving credit facilities
Proceeds from term loans
Repayments of revolving credit facilities
Repayments of term loans
Finance fees paid in connection with credit facilities
Payments of notes payable
Repurchase of common stock
Exercise of stock options
Net cash used in financing activities
Effect of exchange rate changes on cash
Cash and cash equivalents:
Increase/(decrease) during the year
Cash and cash equivalents, at beginning of year
Cash and cash equivalents, at end of year
Supplemental disclosures of cash flow information:
Cash paid for:
Income taxes
Interest
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
89,633 $
126,036 $
105,193
22,527
1,509
10,217
472
2,510
—
21,299
1,314
18,969
905
(353)
(10,904)
(14,836)
2,573
6,618
152,453
(11,772)
245
(100,075)
10,020
58
—
(101,524)
—
—
(3,028)
(4,362)
—
(504)
(6,845)
11,376
(3,363)
21,808
6,502
9,612
506
358
—
20,150
(1,227)
3,305
(25,371)
(3,878)
(3,946)
837
(14)
943
155,621
(37,297)
(33,842)
—
—
8,354
—
(62,785)
9,435
15,383
(45,821)
—
(276)
(477)
(12,209)
13,598
(20,367)
19,992
(4,904)
9,666
921
16,906
987
16,087
853
(17,307)
(37,841)
(506)
(6,331)
5,881
(2,475)
1,425
108,547
(41,346)
—
—
—
1,920
22,284
(17,142)
149,250
—
(110,500)
(168,750)
(852)
(471)
(5,232)
23,271
(113,284)
265
902
(2,400)
47,831
103,255
151,086 $
73,371
29,884
103,255 $
(24,279)
54,163
29,884
16,692 $
1,080
27,071 $
1,288
22,141
4,228
$
$
See accompanying notes.
40
RBC Bearings Incorporated
Notes to Consolidated Financial Statements
(dollars in thousands, except share and per share data)
1. Organization and Business
RBC Bearings Incorporated, together with its subsidiaries, is an international manufacturer and marketer of highly engineered precision bearings
and products, which are integral to the manufacture and operation of most machines, aircraft and mechanical systems, to reduce wear to moving parts,
facilitate proper power transmission, reduce damage and energy loss caused by friction and control pressure and flow. The terms “we,” “us,” “our,” “RBC”
and the “Company” mean RBC Bearings Incorporated and its subsidiaries, unless the context indicates another meaning. While we manufacture products in
all major categories, we focus primarily on highly technical or regulated bearing products and engineered products for specialized markets that require
sophisticated design, testing and manufacturing capabilities. We believe our unique expertise has enabled us to garner leading positions in many of the
product markets in which we primarily compete. Over the past 16 years, we have broadened our end markets, products, customer base and geographic
reach. We currently have 43 facilities in seven countries, of which 31 are manufacturing facilities.
The Company operates in four reportable business segments—roller bearings, plain bearings, ball bearings and engineered products—in which it
manufactures roller bearing components and assembled parts and designs and manufactures high-precision roller and ball bearings. The Company sells to a
wide variety of original equipment manufacturers (“OEMs”) and distributors who are widely dispersed geographically. No one customer accounted for
more than 7% of the Company’s net sales in fiscal 2021 and no more than 9% of net sales in fiscal 2020 or fiscal 2019. The Company’s segments are
further discussed in Note 19 “Reportable Segments.”
2. Summary of Significant Accounting Policies
General
The consolidated financial statements include the accounts of RBC Bearings Incorporated, Roller Bearing Company of America, Inc. (“RBCA”)
and its wholly-owned subsidiaries, Industrial Tectonics Bearings Corporation (“ITB”), RBC Nice Bearings, Inc. (“Nice”), RBC Precision Products -
Bremen, Inc. (“Bremen (MBC)”), RBC Precision Products - Plymouth, Inc. (“Plymouth”), RBC Lubron Bearing Systems, Inc. (“Lubron”), RBC
Oklahoma, Inc. (“RBC Oklahoma”), RBC Aircraft Products, Inc. (“API”), RBC Southwest Products, Inc. (“SWP”), All Power Manufacturing Co. (“All
Power”), RBC Aerostructures LLC (“AeroS”), Western Precision Aero LLC (“WPA”), Climax Metal Products Company (“CMP”), RBC Turbine
Components LLC (“TCI”), Sonic Industries, Inc. (“Sonic”), Sargent Aerospace and Defense LLC (“Sargent”), Airtomic LLC (“Airtomic”), Schaublin
Holding S.A. and its wholly-owned subsidiaries Schaublin SA, RBC Bearings Polska sp. Z.o.o., RBC France SAS, Vianel Holding AG, Beck Bühler
Mutschler Capital AG, Bär und Mettler AG, MBM Monstein Bär Mettler Modulare Werkzeugsysteme AG, Swiss Tool Systems AG and Schaublin GmbH
(“Schaublin”), RBC de Mexico S DE RL DE CV (“Mexico”), RBC Bearings U.K. Limited, Allpower de Mexico S DE RL DE CV (“Tecate”) and RBC
Bearings Canada, Inc. Divisions of RBCA include: RBC Corporate, RBC E-Shop, RBC Aerospace sales office and warehouse, Transport Dynamics
(“TDC”), Heim (“Heim Bearings Company”), Engineered Components (“ECD”), RBC Aerocomponents (“AeroC”), PIC Design (“PIC Design”), RBC
Hartsville, RBC West Trenton, RBC Bishopsville, RBC Eastern Distribution Center, Shanghai Representative office of Roller Bearing Company of
America, Inc. (“RBC Shanghai”) and RBC Grand Prarie TX location. U.S. Bearings (“USB”) is a division of SWP and Schaublin USA is a division of
Nice. All intercompany balances and transactions have been eliminated in consolidation.
The Company has a fiscal year consisting of 52 or 53 weeks, ending on the Saturday closest to March 31. Based on this policy, fiscal year 2021
contained 53 weeks and fiscal years 2020 and 2019 each contained 52 weeks. The amounts are shown in thousands, unless otherwise indicated.
Use of Estimates
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and
assumptions that affect the reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities, at the date of the financial
statements, and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Estimates are
used for, but not limited to, the accounting for the allowance for doubtful accounts, valuation of inventories, goodwill and intangible assets, depreciation
and amortization, income taxes and tax reserves and the valuation of options.
41
Revenue Recognition
A contract with a customer exists when there is commitment and approval from both parties involved, the rights of the parties are identified,
payment terms are defined, the contract has commercial substance, and collectability of consideration is probable. The Company has determined that the
contract with the customer is established when the customer purchase order is accepted or acknowledged. Long-term agreements (LTAs) are used by the
Company and certain of its customers to reduce their supply uncertainty for a period of time, typically multiple years. While these LTAs define commercial
terms including pricing, termination rights and other contractual requirements, they do not represent the contract with the customer for revenue recognition
purposes.
When the Company accepts or acknowledges the customer purchase order, the type of good or service is defined on a line-by-line basis. Individual
performance obligations are established by virtue of the individual line items identified on the sales order acknowledgment at the time of issuance. The
majority of the Company’s revenue relates to the sale of goods and contains a single performance obligation for each distinct good. The remainder of the
Company’s revenue from customers is generated from services performed. These services include repair and refurbishment work performed on customer-
controlled assets as well as design and test work. The performance obligations for these services are also identified on the sales order acknowledgement at
the time of issuance on a line-by-line basis.
Transaction price reflects the amount of consideration that the Company expects to be entitled to in exchange for transferred goods or services. A
contract’s transaction price is allocated to each distinct performance obligation and revenue is recognized as the performance obligation is satisfied. For the
majority of our contracts, the Company either provides distinct goods or services. Where both distinct goods and services are provided, we separate the
contract into more than one performance obligation (i.e., a good or service is individually listed in a contract or sold individually to a customer). The
Company generally sells products and services with observable standalone selling prices.
The performance obligations for the majority of RBC’s product sales are satisfied at the point in time in which the products are shipped, consistent
with the pattern of revenue recognition under the previous accounting standard. The Company has determined that the customer obtains control upon
shipment of the product based on the shipping terms (either when it ships from RBC’s dock or when the product arrives at the customer’s dock) and
recognizes revenue accordingly. Once a product has shipped, the customer is able to direct the use of, and obtain substantially all of the remaining benefits
from, the asset. Approximately 96%, 95% and 94% of the Company’s revenue was recognized in this manner based on sales for the years ended April 3,
2021, March 28, 2020 and March 30, 2019, respectively.
The Company has determined performance obligations are satisfied over time for customer contracts where RBC provides services to customers
and also for a limited number of product sales. RBC has determined revenue recognition over time is appropriate for our service revenue contracts as they
create or enhance an asset that the customer controls throughout the duration of the contract. Approximately 4%, 5% and 6% of the Company’s revenue
was recognized in this manner based on sales for the years ended April 3, 2021, March 28, 2020 and March 30, 2019, respectively. Revenue recognition
over time is appropriate for customer contracts with product sales in which the product sold has no alternative use to RBC without significant economic
loss and an enforceable right to payment exists, including a normal profit margin from the customer, in the event of contract termination. These types of
contracts comprised less than 1% of total sales for the years ended April 3, 2021, March 28, 2020 and March 30, 2019, respectively. For both of these types
of contracts, revenue is recognized over time based on the extent of progress towards completion of the performance obligation. The Company utilizes the
cost-to-cost measure of progress for over-time revenue recognition contracts as we believe this measure best depicts the transfer of control to the customer,
which occurs as we incur costs on contracts. Revenues, including profits, are recorded proportionally as costs are incurred. Costs to fulfill include labor,
materials, subcontractors’ costs, and other direct and indirect costs.
Contract costs are the incremental costs of obtaining and fulfilling a contract (i.e., costs that would not have been incurred if the contract had not
been obtained) to provide goods and services to customers. Contract costs largely consist of design and development costs for molds, dies and other tools
that RBC will own and that will be used in producing the products under the supply arrangements. These contract costs are amortized to expense on a
systematic and rational basis over a period consistent with the transfer to the customer of the goods or services to which the asset relates. Costs incurred to
obtain a contract are primarily related to sales commissions and are expensed as incurred as they are generally not tied to specific customer contracts. These
costs are included within selling, general and administrative costs on the consolidated statements of operations.
In certain contracts, the Company facilitates shipping and handling activities after control has transferred to the customer. The Company has
elected to record all shipping and handling activities as costs to fulfill a contract. In situations where the shipping and handling costs have not been incurred
at the time revenue is recognized, the estimated shipping and handling costs are accrued.
42
Cash and Cash Equivalents and Marketable Securities
The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents. The
Company maintains its cash accounts primarily with Bank of America, N.A., Credit Suisse Group AG and Wells Fargo & Company. The domestic balances
are insured by the Federal Deposit Insurance Company up to $250. The Company has not experienced any losses in such accounts.
At April 3, 2021, the Company held $90,249 of short-term marketable securities comprised of mutual funds as part of the Company’s investment
strategy. These investments are measured at fair value by using quoted prices in active markets and are classified as Level 1 of the valuation hierarchy.
These mutual funds can be liquidated at the Company’s discretion. They are held for investment and are not considered debt securities. Preservation of
principal is the primary goal of our cash and investment policy. Pursuant to our established investment guidelines, we strive to achieve high levels of credit
quality, liquidity and diversification. Our investment guidelines do not permit us to invest in puts, calls, strips, short sales, straddles, options, commodities,
precious metals, futures or investments on margin.
Accounts Receivable, Net and Concentration of Credit Risk
Accounts receivable include amounts billed and currently due from customers. The amounts due are stated at their estimated net realizable value.
The Company maintains an allowance for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments.
The Company uses an expected credit loss model to estimate the credit losses expected over the life of an exposure (or pool of exposures). The estimate of
expected credit losses considers historical information, current information and reasonable and supportable forecasts, including estimates of prepayments.
Financial instruments with similar risk characteristics are grouped together when estimating expected credit losses. The Company will write-off accounts
receivable after reasonable collection efforts have been made and the accounts are deemed uncollectible.
The Company sells to a large number of OEMs and distributors who service the aftermarket. The Company’s credit risk associated with accounts
receivable is minimized due to its customer base and wide geographic dispersion. The Company performs ongoing credit evaluations of its customers’
financial condition and generally does not require collateral or charge interest on outstanding amounts. The Company had no concentrations of credit risk
with any one customer greater than approximately 7% of accounts receivables at April 3, 2021 and 7% at March 28, 2020.
Inventory
Inventories are stated at the lower of cost or net realizable value. Cost is determined by the first-in, first-out method. The Company accounts for
inventory under a full absorption method, and records adjustments to the value of inventory based upon past sales history and forecasted plans to sell our
inventories. The physical condition, including age and quality, of the inventories is also considered in establishing its valuation. These adjustments are
estimates, which could vary significantly, either favorably or unfavorably, from actual requirements if future economic conditions, customer inventory
levels or competitive conditions differ from our expectations.
Contract Assets (Unbilled Receivables)
Pursuant to the over-time revenue recognition model, revenue may be recognized prior to the customer being invoiced. An unbilled receivable is
recorded to reflect revenue that is recognized when (1) the cost-to-cost method is applied and (2) such revenue exceeds the amount invoiced to the
customer. Contract assets are included within prepaid expenses and other current assets or other assets on the consolidated balance sheets.
Property, Plant and Equipment
Property, plant and equipment are recorded at cost. Depreciation and amortization of property, plant and equipment, is provided for by the straight-
line method over the estimated useful lives of the respective assets. Depreciation of assets is reported within depreciation and amortization. Expenditures
for normal maintenance and repairs are charged to expense as incurred.
43
The estimated useful lives of the Company’s property, plant and equipment are as follows:
Buildings and improvements
Machinery and equipment
Leasehold improvements
Leases
20-30 years
3-15 years
Shorter of the term of lease or estimated useful life
The Company adopted ASC 842, Leases, on March 31, 2019. The Company has elected not to apply the recognition requirements to short-term
leases, and recognizes lease payments in the income statement on a straight-line basis over the lease term and variable payments in the period in which the
obligation for those payments is incurred. The Company has elected the following practical expedients (which must be elected as a package and applied
consistently to all leases): an entity need not reassess whether any expired or existing contracts are or contain leases; an entity need not reassess the lease
classification for any expired or existing leases; and an entity need not reassess initial direct costs for any existing leases. The Company has also elected the
practical expedient that permits the inclusion of lease and nonlease components as a single component and accounts for it as a lease; this election has been
made for all asset classes. We also elected the hindsight practical expedient to determine the reasonably certain lease term for existing leases, which
resulted in the extension of lease terms for certain existing leases.
The Company determines if an arrangement is a lease at contract inception. For leases where the Company is the lessee, it recognizes lease assets
and related lease liabilities at the lease commencement date based on the present value of lease payments over the lease term. The lease term is the
noncancellable period for which a lessee has the right to use an underlying asset, including periods covered by an option to extend the lease if the lessee is
reasonably certain to exercise that option and periods covered by an option to terminate the lease if the lessee is reasonably certain not to exercise that
option. For renewal options, the Company performs an assessment at commencement if it is reasonably likely to exercise the option. The assessment is
based on the Company’s intentions, past practices, estimates and factors that create an economic incentive for the Company. Generally, the Company is not
reasonably certain to exercise the renewal option in a lease contract, with the exception of some of our leased manufacturing facilities. While some of the
Company’s leases include options allowing early termination of the lease, the Company historically has not terminated its lease agreements early unless
there is an economic, financial or business reason to do so; therefore, the Company does not typically consider the termination option in its lease term at
commencement.
Most of the Company’s leases do not provide an implicit interest rate. As a result, the Company uses its incremental borrowing rate based on the
information available at the commencement date in determining the present value of lease payments.
Lease expense for operating leases is recognized on a straight-line basis over the lease term as an operating expense while the expense for finance
leases is recognized as depreciation expense and interest expense using the accelerated interest method of recognition.
Goodwill and Indefinite-Lived Intangible Assets
Goodwill (representing the excess of the amount paid to acquire a company over the estimated fair value of the net assets acquired) and indefinite
lived intangible assets are not amortized but instead are tested for impairment annually, or when events or circumstances indicate that the carrying value of
such asset may not be recoverable. Separate tests are performed for goodwill and indefinite lived intangible assets. We completed a quantitative test of
impairment on the indefinite lived intangible assets with no impairment noted in the current year. The determination of any goodwill impairment is made at
the reporting unit level. The Company determines the fair value of a reporting unit and compares it to its carrying amount. If the carrying amount of the
reporting unit exceeds its fair value, an impairment loss is recognized for any amount by which the carrying amount exceeds the reporting unit’s fair value
up to the value of goodwill. The Company applies the income approach (discounted cash flow method) in testing goodwill for impairment. The key
assumptions used in the discounted cash flow method used to estimate fair value include discount rates, revenue growth rates, terminal growth rates and
cash flow projections. Discount rates, revenue growth rates and cash flow projections are the most sensitive and susceptible to change as they require
significant management judgment. Discount rates are determined by using a weighted average cost of capital (“WACC”). The WACC considers market and
industry data as well as Company-specific risk factors for each reporting unit in determining the appropriate discount rate to be used. The discount rate
utilized for each reporting unit for our fiscal 2021 test was 9.5% and is indicative of the return an investor would expect to receive for investing in such a
business. Terminal growth rate determination follows common methodology of capturing the present value of perpetual cash flow estimates beyond the last
projected period assuming a constant WACC and long-term growth rates. The terminal growth rate used for our fiscal 2021 test was 2.5%. The Company
has determined that, to date, no impairment of goodwill exists and fair value of the reporting units exceeded the carrying value in total by approximately
137.4%. The fair value of the reporting units exceeds the carrying value by a minimum of 49.2% at each of the four reporting units. A decrease of 1.0% in
our terminal growth rate would not result in impairment of goodwill for any of our reporting units. An increase of 1.0% in our discount rate would not
result in impairment of goodwill for any of our reporting units. The Company performs the annual impairment testing during the fourth quarter of each
fiscal year. Although no changes are expected, if the actual results of the Company are less favorable than the assumptions the Company makes regarding
estimated cash flows, the Company may be required to record an impairment charge in the future.
44
Deferred Financing Costs
Deferred financing costs are amortized on a straight-line basis over the lives of the related credit agreements.
Contract Liabilities (Deferred Revenue)
The Company may receive a customer advance or deposit, or have an unconditional right to receive a customer advance, prior to revenue being
recognized. Since the performance obligations related to such advances may not have been satisfied, a contract liability is established. Contract liabilities
are included within accrued expenses and other current liabilities or other noncurrent liabilities on the consolidated balance sheets until the respective
revenue is recognized. Advance payments are not considered a significant financing component as the timing of the transfer of the related goods or services
is at the discretion of the customer.
Income Taxes
The Company accounts for income taxes using the liability method, which requires it to recognize a current tax liability or asset for current taxes
payable or refundable and a deferred tax liability or asset for the estimated future tax effects of temporary differences between the financial statement and
tax reporting bases of assets and liabilities to the extent that they are realizable. Deferred tax expense (benefit) results from the net change in deferred tax
assets and liabilities during the year. A valuation allowance is recorded to reduce deferred tax assets to the amount that is more likely than not to be
realized. The Company is exposed to certain tax contingencies in the ordinary course of business and records those tax liabilities in accordance with the
guidance for accounting for uncertain tax positions.
Temporary differences relate primarily to the timing of deductions for depreciation, stock-based compensation, goodwill amortization relating to
the acquisition of operating divisions, basis differences arising from acquisition accounting, pension and retirement benefits, and various accrued and
prepaid expenses. Deferred tax assets and liabilities are recorded at the rates expected to be in effect when the temporary differences are expected to
reverse.
Net Income Per Common Share
Basic net income per common share is computed by dividing net income available to common stockholders by the weighted-average number of
common shares outstanding.
Diluted net income per common share is computed by dividing net income available to common stockholders by the sum of the weighted-average
number of common shares and dilutive common share equivalents then outstanding using the treasury stock method. Common share equivalents consist of
the incremental common shares issuable upon the vesting or exercise of stock awards.
The table below reflects the calculation of weighted-average shares outstanding for each year presented as well as the computation of basic and
diluted net income per common share:
Net income
Denominator:
Denominator for basic net income per common share—weighted-average shares
Effect of dilution due to employee stock options
Denominator for diluted net income per common share—adjusted
weighted-average shares
Basic net income per common share
Diluted net income per common share
45
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
89,633 $
126,036 $
105,193
24,851,344
197,107
24,632,637
289,994
24,357,684
358,529
25,048,451
3.61 $
3.58 $
24,922,631
5.12 $
5.06 $
24,716,213
4.32
4.26
$
$
At April 3, 2021, 457,324 employee stock options and 35,780 restricted shares have been excluded from the calculation of diluted earnings per
share. At March 28, 2020, 350,540 employee stock options and 1,350 restricted shares have been excluded from the calculation of diluted earnings per
share. At March 30, 2019, 256,990 employee stock options and 1,500 restricted shares have been excluded from the calculation of diluted earnings per
share. The inclusion of these employee stock options and restricted shares would be anti-dilutive.
Impairment of Long-Lived Assets
The Company assesses the net realizable value of its long-lived assets and evaluates such assets for impairment whenever indicators of impairment
are present. For amortizable long-lived assets to be held and used, if indicators of impairment are present, management determines whether the sum of the
estimated undiscounted future cash flows is less than the carrying amount. The amount of asset impairment, if any, is based on the excess of the carrying
amount over its fair value, which is estimated based on projected discounted future operating cash flows using a discount rate reflecting the Company’s
average cost of funds. To date, no indicators of impairment exist other than those resulting in the restructuring charges already recorded.
Long-lived assets to be disposed of by sale or other means are reported at the lower of carrying amount or fair value, less costs to sell.
Foreign Currency Translation and Transactions
Assets and liabilities of the Company’s foreign operations are translated into U.S. dollars using the exchange rate in effect at the balance sheet
date. Results of operations are translated using the average exchange rate prevailing throughout the period. The effects of exchange rate fluctuations on
translating foreign currency assets and liabilities into U.S. dollars are included in accumulated other comprehensive income (loss), while gains and losses
resulting from foreign currency transactions are included in other non-operating expense (income).
Fair Value of Measurements
Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at
the measurement date (exit price). Inputs used to measure fair value are within a hierarchy consisting of three levels. Level 1 inputs represent unadjusted
quoted prices in active markets for identical assets or liabilities. Level 2 inputs represent unadjusted quoted prices in active markets for similar assets or
liabilities, or unadjusted quoted prices for identical or similar assets or liabilities in markets that are not active, or inputs other than quoted prices that are
observable for the asset or liability. Level 3 inputs represent unobservable inputs for the asset or liability. Financial assets and liabilities are classified in
their entirety based on the lowest level of input that is significant to the fair value measurement.
The carrying amounts reported in the balance sheet for cash and cash equivalents, short-term investments, accounts receivable, prepaids and other
current assets, and accounts payable and accruals, and other current liabilities approximate their fair value due to their short-term nature.
The carrying amounts of the Company’s borrowings under the Revolver, Foreign Revolver and Foreign Term Loan approximate fair value, as
these obligations have interest rates which vary in conjunction with current market conditions. The carrying value of the mortgage on our Schaublin
building approximates fair value as the rates since entering into the mortgage in fiscal 2013 have not significantly changed. All borrowings have been
classified as Level 2 in the valuation hierarchy.
Accumulated Other Comprehensive Income (Loss)
The components of comprehensive income (loss) that relate to the Company are net income, foreign currency translation adjustments and pension
plan and postretirement benefits, all of which are presented in the consolidated statements of stockholders’ equity and comprehensive income (loss).
46
The following summarizes the activity within each component of accumulated other comprehensive income (loss), net of taxes:
Balance at March 28, 2020
Amounts recorded in/ reclassified from accumulated other comprehensive loss
Net current period other comprehensive income
Balance at April 3, 2021
Share-Based Compensation
Currency
Translation
Pension and
Postretirement
Liability
$
$
(582) $
—
1,027
445 $
(6,316) $
(4,538)
(4,538)
(10,854) $
Total
(6,898)
(4,538)
(3,511)
(10,409)
The Company recognizes compensation cost relating to all share-based payment transactions in the financial statements based upon the grant-date
fair value of the instruments issued over the requisite service period. The fair value of each option grant was estimated on the date of grant using the Black-
Scholes pricing model.
Recent Accounting Pronouncements
Recent Accounting Standards Adopted
In September 2016, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) No. 2016-13, Financial
Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, which changes how entities measure credit losses for
most financial assets and certain other instruments that are not measured at fair value through net income. The guidance replaces the former incurred loss
approach with a new expected credit loss impairment model. The new model applies to most financial assets measured at amortized cost and certain other
instruments, including trade and other receivables, loans, held-to-maturity debt instruments, net investments in leases, loan commitments and standby
letters of credit. Upon initial recognition of the exposure, the expected credit loss model requires entities to estimate the credit losses expected over the life
of an exposure (or pool of exposures). The estimate of expected credit losses considers historical information, current information and reasonable and
supportable forecasts, including estimates of prepayments. Financial instruments with similar risk characteristics are grouped together when estimating
expected credit losses. ASU 2016-13 does not prescribe a specific method to make the estimate, so its application requires significant judgment. The
Company adopted this accounting standard update in the first quarter of fiscal 2021 and it did not have a material impact on the Company’s consolidated
financial statements.
In January 2017, the FASB issued ASU No. 2017-04, Intangibles – Goodwill and Other (Topic 350): Simplifying the Test for Goodwill
Impairment. The objective of this standard update is to simplify the subsequent measurement of goodwill, eliminating Step 2 from the goodwill impairment
test. Under this ASU, an entity should perform its annual goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount.
An entity would recognize an impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value, assuming the loss
recognized does not exceed the total amount of goodwill for the reporting unit. The adoption of this ASU did not have a material impact on the Company’s
consolidated financial statements.
Recent Accounting Standards Yet to Be Adopted
In December 2019, the FASB issued ASU No. 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes. The objective of
this standard update is to simplify the accounting for income taxes by removing certain exceptions to the general principles in Topic 740. This ASU also
attempts to improve consistent application of and simplify GAAP for other areas of Topic 740 by clarifying and amending existing guidance. This standard
update is effective for fiscal years beginning after December 15, 2020, including interim periods within those fiscal years. The Company is currently
evaluating the effect that the adoption of this ASU will have on the Company’s consolidated financial statements.
Other new pronouncements issued but not effective until after April 3, 2021 are not expected to have a material impact on our financial position,
results of operations or liquidity.
47
3. Revenue from Contracts with Customers
Disaggregation of Revenue
The Company operates in four business segments with similar economic characteristics, including nature of the products and production
processes, distribution patterns and classes of customers. Revenue is disaggregated within these business segments by our two principal end markets:
aerospace and industrial. Comparative information of the Company’s overall revenues for the years ended April 3, 2021, March 28, 2020 and March 30,
2019 are as follows:
Principal End Markets:
Plain
Roller
Ball
Engineered Products
Plain
Roller
Ball
Engineered Products
Plain
Roller
Ball
Engineered Products
Aerospace
$
For the Fiscal Year Ended
April 3, 2021
Industrial
210,166 $
43,488
28,254
71,173
353,081 $
83,824 $
48,169
55,450
68,460
255,903 $
For the Fiscal Year Ended
March 28, 2020
Industrial
277,601 $
71,386
23,453
96,806
469,246 $
80,690 $
61,256
50,778
65,491
258,215 $
For the Fiscal Year Ended
March 30, 2019
Industrial
238,259 $
70,682
21,621
100,571
431,133 $
84,992 $
73,150
50,686
62,555
271,383 $
Total
293,990
91,657
83,704
139,633
608,984
Total
358,291
132,642
74,231
162,297
727,461
Total
323,251
143,832
72,307
163,126
702,516
$
$
$
Aerospace
$
Aerospace
$
In addition to disaggregating revenue by segment and principal end markets, the Company believes information about the timing of transfer of
goods or services, type of customer and distinguishing service revenue from product sales is also relevant. Refer to Note 2 – “Summary of Significant
Accounting Policies – Revenue Recognition” for further details.
48
Remaining Performance Obligations
Remaining performance obligations represent the transaction price of orders meeting the definition of a contract in the new revenue standard for
which work has not been performed or has been partially performed and excludes unexercised contract options. The duration of the majority of our
contracts, as defined by ASC Topic 606, is less than one year. The Company has elected to apply the practical expedient, which allows companies to
exclude remaining performance obligations with an original expected duration of one year or less. The aggregate amount of the transaction price allocated
to remaining performance obligations for such contracts with a duration of more than one year was approximately $265,021 at April 3, 2021. The Company
expects to recognize revenue on approximately 60% and 83% of the remaining performance obligations over the next 12 and 24 months, respectively, with
the remainder recognized thereafter.
Contract Balances
The timing of revenue recognition, invoicing and cash collections affect accounts receivable, unbilled receivables (contract assets) and customer
advances and deposits (contract liabilities) on the consolidated balance sheets. These assets and liabilities are reported on the consolidated balance sheets
on an individual contract basis at the end of each reporting period.
Contract Assets (Unbilled Receivables) - Pursuant to the over-time revenue recognition model, revenue may be recognized prior to the customer
being invoiced. An unbilled receivable is recorded to reflect revenue that is recognized when (1) the cost-to-cost method is applied and (2) such revenue
exceeds the amount invoiced to the customer.
As of April 3, 2021 and March 28, 2020, current contract assets were $5,584 and $2,604, respectively, and included within prepaid expenses and
other current assets on the consolidated balance sheets. The increase in contract assets was primarily due to the recognition of revenue related to the
satisfaction or partial satisfaction of performance obligations prior to billing partially offset by amounts billed to customers during the period. As of April 3,
2021 and March 28, 2020, the Company did not have any contract assets classified as noncurrent on the consolidated balance sheets. There were no
impairment losses related to the Company’s contract assets during the year ended April 3, 2021.
Contract Liabilities (Deferred Revenue) - The Company may receive a customer advance or deposit, or have an unconditional right to receive a
customer advance, prior to revenue being recognized. Since the performance obligations related to such advances may not have been satisfied, a contract
liability is established. Advance payments are not considered a significant financing component as the timing of the transfer of the related goods or services
is at the discretion of the customer.
As of April 3, 2021 and March 28, 2020, current contract liabilities were $16,998 and $11,116, respectively, and included within accrued expenses
and other current liabilities on the consolidated balance sheets. The increase in current contract liabilities was primarily due to advance payments received
and the reclassification of a portion of advance payments received from the noncurrent portion of contract liabilities partially offset by revenue recognized
on customer contracts. For the year ended April 3, 2021, the Company recognized revenues of $10,355 that were included in the contract liability balance
as of March 28, 2020. For the year ended March 28, 2020, the Company recognized revenues of $7,849 that were included in the contract liability balance
at March 30, 2019.
As of April 3, 2021 and March 28, 2020, noncurrent contract liabilities were $3,754 and $2,427, respectively, and included within other
noncurrent liabilities on the consolidated balance sheets. The increase in noncurrent contract liabilities was primarily due to advance payments received
partially offset by the reclassification of a portion of advance payments received to the current portion of contract liabilities.
Accounts Receivable - As of April 3, 2021 and March 28, 2020, accounts receivable with customers, net, were $110,472 and $128,995,
respectively.
49
4. Allowance for Doubtful Accounts
The activity in the allowance for doubtful accounts consists of the following:
Fiscal Year Ended
April 3, 2021
March 28, 2020
March 30, 2019
Balance at
Beginning of
Year
Additions
Other*
Write-offs
$
1,627 $
1,430
1,326
480 $
263
203
(86) $
13
(85)
(229) $
(79)
(14)
Balance at
End of Year
1,792
1,627
1,430
* Foreign currency, price discrepancies, customer returns, disposition and acquisition transactions.
5. Inventory
Inventories are summarized below:
Raw materials
Work in process
Finished goods
6. Property, Plant and Equipment
Property, plant and equipment consist of the following:
Land
Buildings and improvements
Machinery and equipment
Less: accumulated depreciation and amortization
7. Leases
April 3,
2021
March 28,
2020
57,764 $
86,183
220,200
364,147 $
51,362
97,286
218,846
367,494
April 3,
2021
March 28,
2020
17,658 $
90,668
322,949
431,275
(223,011)
208,264 $
17,621
90,834
321,580
430,035
(210,189)
219,846
$
$
$
$
The Company enters into operating leases for manufacturing facilities, warehouses, sales offices, information technology equipment, plant
equipment, vehicles and certain other equipment with varying end dates from April 2021 to March 2038, including renewal options.
The following table represents the impact of leasing on the consolidated balance sheets:
Operating Leases:
Lease assets:
Operating lease assets, net
Lease liabilities:
Current operating lease liabilities
Long-term operating lease liabilities
Total operating lease liabilities
50
April 3,
2021
March 28,
2020
$
35,664 $
28,953
5,726
29,982
35,708 $
5,708
23,396
29,104
$
The Company did not have any finance leases as of April 3, 2021 or March 28, 2020. Cash paid included in the measurement of lease liabilities
was $6,869 and $5,771 for the twelve-month periods ended April 3, 2021 and March 28, 2020, respectively. Lease assets obtained in exchange for new
operating lease liabilities were $1,637 and $5,586 for the twelve-month periods ended April 3, 2021 and March 28, 2020, respectively. Lease modifications
which resulted in newly obtained lease assets in exchange for new operating lease liabilities were $11,110 for the twelve-month period ended April 3, 2021
and were immaterial for the twelve-month period ended March 28, 2020.
Total operating lease expense was $7,647, $7,079 and $7,172 for the twelve-month periods ended April 3, 2021, March 28, 2020 and March 30,
2019, respectively. Short-term and variable lease expense were immaterial.
Future undiscounted lease payments for the remaining lease terms as of April 3, 2021, including renewal options reasonably certain of being
exercised, are as follows:
Within one year
One to two years
Two to three years
Three to four years
Four to five years
Thereafter
Total future undiscounted lease payments
Less: imputed interest
Total operating lease liabilities
Operating
Leases
$
$
5,841
5,267
3,921
3,724
3,360
21,286
43,399
(7,691)
35,708
The weighted-average remaining lease term on April 3, 2021 for our operating leases is 11.4 years. The weighted-average discount rate on April 3,
2021 for our operating leases is 4.0%.
8. Acquisition
On August 15, 2019, the Company, through its Schaublin SA subsidiary, acquired all of the outstanding shares of Swiss Tool for a purchase price
of approximately $33,597 (CHF 32,768). We have finalized the purchase price allocation with no material adjustments subsequent to March 28, 2020.
9. Restructuring and Consolidation
Throughout fiscal 2021, the Company consolidated certain manufacturing facilities to increase efficiencies of our operations. This resulted in
$7,247 of restructuring charges incurred during the year, including $3,071 of inventory rationalization costs included within cost of sales, $1,994 of which
were attributable to the Roller segment and $1,077 of which were attributable to the Plain segment. The restructuring charges also included $1,314 of fixed
asset disposals included within other operating costs, a $138 lease impairment charge, $681 of personnel-related costs and $2,043 of other items. Of these
$4,176 of other operating costs, $1,595 are related to the Plain segment, $823 are related to the Roller segment, $21 are related to the Ball segment, $1,120
are related to the Engineered Products segment and $617 are Corporate costs. The Company secured operating lease assets obtained in exchange for new
operating lease liabilities of $7,662 as part of this restructuring. The Company anticipates additional costs associated with these consolidation efforts of
$250 to $500 to be incurred in the first quarter of fiscal 2022.
10. Goodwill and Intangible Assets
Goodwill
Goodwill balances, by segment, consist of the following:
March 28, 2020
Acquisition (1)
Translation adjustments
April 3, 2021
Roller
Plain
Ball
Engineered
Products
$
$
16,007 $
—
—
16,007 $
79,597 $
—
—
79,597 $
5,623 $
—
—
5,623 $
176,549 $
(383)
143
176,309 $
Total
277,776
(383)
143
277,536
(1) Includes a reduction of goodwill recognized due to opening balance sheet adjustments made during the measurement period of the Company’s
acquisition of Vianel Holding AG (“Swiss Tool”) on August 15, 2019.
51
Intangible Assets
Product approvals
Customer relationships and lists
Trade names
Distributor agreements
Patents and trademarks
Domain names
Other
Non-amortizable repair station certifications
Total
Weighted
Average
$
Useful Lives
24
23
10
5
16
10
3
n/a
21
$
April 3, 2021
March 28, 2020
Gross
Carrying
Amount
Accumulated
Amortization
Gross
Carrying
Amount
50,878 $
109,762
16,333
722
11,612
437
3,745
193,489
24,281
217,770 $
14,691 $
28,253
10,392
722
6,211
437
2,665
63,371
—
63,371 $
Accumulated
Amortization
12,597
23,557
8,906
722
6,045
437
3,468
55,732
—
55,732
50,878 $
109,645
16,330
722
11,553
437
4,633
194,198
24,281
218,479 $
Amortization expense for definite-lived intangible assets during fiscal years 2021, 2020 and 2019 was $10,217, $9,612 and $9,666, respectively.
Estimated amortization expense for the five succeeding fiscal years and thereafter is as follows:
2022
2023
2024
2025
2026
2027 and thereafter
11. Accrued Expenses and Other Current Liabilities
The significant components of accrued expenses and other current liabilities are as follows:
Employee compensation and related benefits
Taxes
Contract Liabilities
Workers compensation and insurance
Legal
Other
12. Debt
Domestic Credit Facility
$
9,658
9,462
9,332
9,245
7,112
85,309
April 3,
2021
March 28,
2020
11,846 $
2,896
16,998
2,915
380
8,529
43,564 $
16,275
2,751
11,116
3,500
250
6,688
40,580
$
$
The Company’s credit agreement with Wells Fargo Bank, National Association, as Administrative Agent, Collateral Agent, Swingline Lender and
Letter of Credit Issuer, and the other lenders party thereto (the “Credit Agreement”) provides the Company with a $250,000 revolving credit facility (the
“Revolver”), which expires on January 31, 2024. Debt issuance costs associated with the Credit Agreement totaled $852 and will be amortized through
January 31, 2024 along with the unamortized debt issuance costs remaining from the Company’s prior credit Agreement. As of April 3, 2021, $1,121 in
unamortized debt issuance costs remain.
Amounts outstanding under the Revolver generally bear interest at (a) a base rate determined by reference to the higher of (1) Wells Fargo’s prime
lending rate, (2) the federal funds effective rate plus 1/2 of 1% and (3) the one-month LIBOR rate plus 1%, or (b) LIBOR plus a specified margin,
depending on the type of borrowing being made. The applicable margin is based on the Company’s consolidated ratio of total net debt to consolidated
EBITDA at each measurement date. Currently, the Company’s margin is 0.00% for base rate loans and 0.75% for LIBOR loans.
52
The Credit Agreement requires the Company to comply with various covenants including, among other things, a financial covenant to maintain a
ratio of consolidated net debt to adjusted EBITDA not greater than 3.50 to 1. The Credit Agreement allows the Company to, among other things, make
distributions to shareholders, repurchase its stock, incur other debt or liens, or acquire or dispose of assets provided that the Company complies with certain
requirements and limitations of the Credit Agreement. As of April 3, 2021, the Company was in compliance with all such covenants.
The Company’s domestic subsidiaries have guaranteed the Company’s obligations under the Credit Agreement, and the Company’s obligations
and the domestic subsidiaries’ guarantee are secured by a pledge of substantially all of the domestic assets of the Company and its domestic subsidiaries.
Approximately $3,550 of the Revolver is being utilized to provide letters of credit to secure the Company’s obligations relating to certain
insurance programs. The Company has the ability to borrow up to an additional $246,450 under the Revolver as of April 3, 2021.
Foreign Term Loan and Revolving Credit Facility
On August 15, 2019, one of our foreign subsidiaries, Schaublin SA (“Schaublin”), entered into two separate credit agreements (the “Foreign
Credit Agreements”) with Credit Suisse (Switzerland) Ltd. to (i) finance the acquisition of Swiss Tool, which is discussed in further detail in Note 8, and
(ii) provide future working capital. The Foreign Credit Agreements provided Schaublin with a CHF 15,000 (approximately $15,383) term loan (the
“Foreign Term Loan”), which expires on July 31, 2024 and a CHF 15,000 (approximately $15,383) revolving credit facility (the “Foreign Revolver”),
which continues in effect until terminated by either Schaublin or Credit Suisse. Debt issuance costs associated with the Foreign Credit Agreements totaled
CHF 270 (approximately $277) and will be amortized throughout the life of the Foreign Credit Agreements. As of April 3, 2021, approximately $95 in
unamortized debt issuance costs remain.
Amounts outstanding under the Foreign Term Loan and the Foreign Revolver generally bear interest at LIBOR plus a specified margin. The
applicable margin is based on Schaublin’s ratio of total net debt to consolidated EBITDA at each measurement date. Currently, Schaublin’s margin is
1.00%.
The Foreign Credit Agreements require Schaublin to comply with various covenants, which are tested annually on March 31. These covenants
include, among other things, a financial covenant to maintain a ratio of consolidated net debt to adjusted EBITDA not greater than 2.50 to 1 as of March
31, 2021 and thereafter. Schaublin is also required to maintain an economic equity of CHF 20,000 at all times. The Foreign Credit Agreements allow
Schaublin to, among other things, incur other debt or liens and acquire or dispose of assets provided that Schaublin complies with certain requirements and
limitations of the Foreign Credit Agreements. As of April 3, 2021, Schaublin was in compliance with all such covenants.
Schaublin’s parent company, Schaublin Holding, has guaranteed Schaublin’s obligations under the Foreign Credit Agreements. Schaublin
Holding’s guaranty and the Foreign Credit Agreements are secured by a pledge of the capital stock of Schaublin. In addition, the Foreign Term Loan is
secured with pledges of the capital stock of the top company and the three operating companies in the Swiss Tool System group of companies.
As of April 3, 2021, there was approximately $11,657 outstanding under the Foreign Term Loan and no amounts outstanding under the Foreign
Revolver. Schaublin has the ability to borrow up to an additional $15,896 under the Foreign Revolver as of April 3, 2021.
Schaublin’s required future annual principal payments are approximately $2,119 for fiscal 2022, $3,179 for both fiscal 2023 and fiscal 2024 and
$3,180 for fiscal 2025.
Other Notes Payable
In 2012 Schaublin purchased the land and building that it occupies for approximately $14,910. Schaublin obtained a 20-year fixed-rate mortgage
of approximately $9,857 at an interest rate of 2.9%. The balance of the purchase price of approximately $5,053 was paid from cash on hand. The balance
on this mortgage as of April 3, 2021 was approximately $5,666 and has been classified as Level 2 of the valuation hierarchy.
The Company’s required future annual principal payments are approximately $493 for each year from fiscal 2022 through fiscal 2026 and $3,201
thereafter.
53
The balances payable under all borrowing facilities are as follows:
Revolver and term loan facilities
Debt issuance cost
Other
Total debt
Less: current portion
Long-term debt
April 3,
2021
March 28,
2020
11,657 $
(1,216)
5,666
16,107
2,612
13,495 $
18,593
(1,687)
6,106
23,012
6,429
16,583
$
$
The current portion of long-term debt as of April 3, 2021 includes the current portion of the Foreign Term Loan and the Schaublin mortgage. The
current portion of long-term debt as of March 28, 2020 includes the current portion of the Foreign Term Loan, Foreign Revolver and the Schaublin
mortgage.
13. Other Noncurrent Liabilities
The significant components of other noncurrent liabilities consist of:
Other postretirement benefits
Noncurrent income tax liability
Deferred compensation
Contract liabilities
Other
14. Employee Benefit Plans
April 3,
2021
March 28,
2020
7,807 $
18,658
25,189
3,754
8
55,416 $
2,485
19,936
18,275
2,427
496
43,619
$
$
At April 3, 2021, the Company has one consolidated noncontributory defined benefit pension plan covering union employees in its Heim division
plant in Fairfield, Connecticut, its Plymouth subsidiary plant in Plymouth, Indiana and former union employees of the Tyson subsidiary in Glasgow,
Kentucky and the Nice subsidiary in Kulpsville, Pennsylvania.
Plan assets are comprised primarily of equity and fixed income investments. As of April 3, 2021 and March 28, 2020, plan assets were $27,238
and $26,381, respectively.
The fair value of the above investments is determined using quoted market prices of identical instruments. Therefore, the valuation inputs within
the fair value hierarchy established by ASC 820 are classified as Level 1 of the valuation hierarchy.
Benefits under the union plans are not a function of employees’ salaries; thus, the accumulated benefit obligation equals the projected benefit
obligation. At April 3, 2021 and March 28, 2020, the projected benefit obligation was $25,380 and $25,260, respectively.
The discount rates used in determining the funded status as of April 3, 2021 and March 28, 2020 were 2.70% and 2.80%, respectively.
The funded status of the Company’s defined benefit pension plan and the amount recognized in the balance sheet at April 3, 2021 and March 28,
2020 were $1,858 and $1,121, respectively. These overfunded amounts are included within noncurrent assets on the consolidated balance sheets.
Net periodic benefit cost for fiscal years 2021, 2020 and 2019 was $529, $276 and $506, respectively. The discount rate used to determine net
periodic benefit cost for fiscal years 2021, 2020 and 2019 was 2.80%, 3.50% and 3.70%, respectively.
Two of the Company’s foreign operations, Schaublin and Swiss Tool, sponsor pension plans for their approximately 136 and 32 employees,
respectively, in conformance with Swiss pension law. The Schaublin plan is funded with an independent semi-autonomous collective provident foundation
whereas the Swiss Tool plan is funded with a reputable Swiss insurer. The unfunded liabilities of these plans at April 3, 2021 were $5,250. For fiscal years
2021, 2020 and 2019, net periodic benefit cost for these plans was $1,123, $1,101 and $887, respectively.
54
The Company has defined contribution plans under Section 401(k) of the Internal Revenue Code for all of its employees not covered by a
collective bargaining agreement. Employer contributions under this plan, ranging from 10%-100% of eligible amounts contributed by employees,
amounted to $2,162, $2,212 and $1,889 in fiscal 2021, 2020 and 2019, respectively.
The Company maintains a non-qualified Supplemental Executive Retirement Plan (“SERP”) for a select group of senior management employees.
When the SERP was initially adopted in 1996, it allowed eligible employees to elect to defer, until termination of their employment, the receipt of up to
25% of their salary. In August 2008, the plan was modified to allow eligible employees to elect to defer up to 75% of their current salary and up to 100% of
bonus compensation. As of April 3, 2021 and March 28, 2020, the SERP assets were $27,856 and $18,944, respectively, and are included within other
assets on the consolidated balance sheets. As of April 3, 2021 and March 28, 2020, the SERP liabilities were $24,178 and $16,141, respectively, and are
included within accrued expenses and other current liabilities and other noncurrent liabilities on the balance sheets.
The Company, for the benefit of employees at its Heim, West Trenton, Plymouth and PIC facilities and former union employees of its Tyson and
Nice subsidiaries, sponsors contributory defined benefit health care plans that provide postretirement medical and life insurance benefits to union
employees who have attained certain age and/or service requirements while employed by the Company. The plans are unfunded and costs are paid as
incurred. Postretirement benefit obligations were $2,646 and $2,661 at April 3, 2021 and March 28, 2020, respectively. Of these amounts, $174 and $176
are considered current and are included within accrued expenses and other current liabilities on the consolidated balance sheets as of April 3, 2021 and
March 28, 2020, respectively. The remainder of the balances are included in other noncurrent liabilities in the consolidated balance sheets.
15. Income Taxes
Income before income taxes for the Company’s domestic and foreign operations is as follows:
Domestic
Foreign
Total income before income taxes
The provision for income taxes consists of the following:
Current tax expense:
Federal
State
Foreign
Deferred tax expense:
Federal
State
Foreign
Total income taxes
55
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
$
105,434 $
4,625
110,059 $
148,154 $
5,985
154,139 $
115,747
10,343
126,090
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
$
15,171 $
1,100
2,646
18,917
336
1,210
(37)
1,509
20,426 $
16,370 $
2,578
2,653
21,601
6,210
1,076
(784)
6,502
28,103 $
18,200
2,908
4,693
25,801
(4,111)
(756)
(37)
(4,904)
20,897
An analysis of the difference between the provision for income taxes and the amount computed by applying the U.S. statutory income tax rate to
pre-tax income follows:
Income taxes using U.S. federal statutory rate
State income taxes, net of federal benefit
Revaluation of deferred tax liabilities due to federal rate change
Stock-based compensation
Foreign rate differential
Transition tax
Research and development credits
Company-owned life insurance
Foreign derived intangible income (FDII)
U.S. unrecognized tax positions
Other - net
Net deferred tax assets (liabilities) are comprised of the following:
Deferred tax assets:
Pension and postretirement benefits
Employee compensation accruals
Inventory
Operating lease liabilities
Stock compensation
Tax loss and credit carryforwards
State tax
Total gross deferred tax assets
Valuation allowance
Total deferred tax assets
Deferred tax liabilities:
Property, plant and equipment
Pension
Operating lease assets
Other
Intangible assets
Total deferred tax liabilities
Total net deferred liabilities
56
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
23,113 $
2,083
—
(2,056)
1,638
—
(1,258)
(1,173)
(1,088)
4
(837)
20,426 $
32,369 $
2,851
—
(3,834)
613
135
(1,737)
334
(1,569)
(146)
(913)
28,103 $
26,479
1,714
282
(5,155)
2,484
(161)
(1,765)
(13)
(1,772)
(951)
(245)
20,897
$
$
April 3,
2021
March 28,
2020
1,021 $
7,080
9,269
8,527
6,132
10,942
1,441
44,412
(6,292)
38,120 $
(20,744) $
—
(8,492)
(505)
(25,557)
(55,298) $
591
4,886
9,479
7,252
5,289
9,726
1,460
38,683
(4,250)
34,433
(21,029)
(262)
(7,218)
(603)
(21,881)
(50,993)
(17,178) $
(16,560)
$
$
$
$
$
The Company evaluates deferred tax assets to ensure that the estimated future taxable income will be sufficient in character (i.e. capital versus
ordinary income treatment), amount and timing to result in their recovery. After considering the positive and negative evidence, a valuation allowance has
been recorded on foreign tax credits and on certain state and foreign credits and net operating losses as it is more likely than not (i.e. greater than a 50%
likelihood) that these items will not be utilized. For the Company’s fiscal year ended April 3, 2021 the valuation allowance increased by $2,042, which
pertained to an increase of U.S. federal and state credits. For the Company’s fiscal year ended March 28, 2020 the valuation allowance increased by $607,
which pertained to an increase of U.S. federal and state credits. These valuation allowances are required because management has determined, based on
financial projections and available tax strategies, that it is unlikely the net operating losses and credits will be utilized before they expire. If events or
circumstances change, valuation allowances are adjusted at that time resulting in an income tax benefit or charge.
At April 3, 2021, the Company had state net operating loss carryovers in different jurisdictions at varying amounts up to $7,332, which expire at
various dates through 2036. At April 3, 2021, the Company had foreign net operating loss carryovers in different jurisdictions at varying amounts up to
$1,377 which will expire at various dates through fiscal 2026. At April 3, 2021, the Company had U.S. federal and state credits in different jurisdictions at
varying amounts up to $7,364 which will expire at various dates through 2036. At April 3, 2021, the Company had foreign credits in different jurisdictions
at varying amounts up to $936 which will expire at various dates through 2037.
Under accounting standards (ASC 740) a deferred tax liability is not recorded for the excess of the tax basis over the financial reporting (book)
basis of an investment in a foreign subsidiary if the indefinite reinvestment criteria is met. The Tax Cuts and Jobs Act (TCJA) required a mandatory
deemed repatriation of certain undistributed earnings of the Company’s foreign subsidiaries as of December 31, 2017, and income taxes were accrued
accordingly. If these deemed repatriated earnings were distributed in the form of cash dividends, the Company would not be subject to additional U.S.
income taxes, other than tax arising from the movement of foreign exchange rates on previously taxed earnings, but could be subject to foreign income and
withholding taxes. A provision has not been made for additional U.S. and foreign taxes at April 3, 2021 on approximately $27,349 of undistributed
earnings of foreign subsidiaries or for any additional tax on the deemed repatriated earnings because the Company intends to reinvest these funds
indefinitely to support foreign growth opportunities. Due to the inherent complexity of the multinational tax environment in which the company operates, it
is not practicable to estimate the unrecognized deferred tax liability on these undistributed earnings. These earnings could become subject to additional tax
under certain circumstances including, but not limited to, loans to the Company, or upon sale or pledging of the foreign subsidiary’s stock.
Uncertain Tax Positions
Unrecognized income tax benefits represent income tax positions taken on income tax returns but not yet recognized in the consolidated financial
statements. If recognized, substantially all of the unrecognized tax benefits for the Company’s fiscal years ended April 3, 2021 and March 28, 2020 would
affect the effective income tax rate.
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:
Balance, beginning of year
Gross increases (decreases) – tax positions taken during a prior period
Gross increases – tax positions taken during the current period
Reductions due to lapse of the applicable statute of limitations
Balance, end of year
April 3,
2021
March 28,
2020
March 30,
2019
$
$
14,212 $
(166)
2,016
(1,445)
14,617 $
13,479 $
123
1,702
(1,092)
14,212 $
11,935
624
2,697
(1,777)
13,479
The Company recognizes the interest and penalties accrued related to unrecognized tax benefits in income tax expense. The Company recognized
expense of $86, $213 and $45 of interest and penalties on its statement of operations for the fiscal years ended April 3, 2021, March 28, 2020 and March
30, 2019, respectively. The Company had approximately $1,492 and $1,406 of accrued interest and penalties at April 3, 2021 and March 28, 2020,
respectively.
The Company believes it is reasonably possible that some of its unrecognized tax positions may be effectively settled by the end of the Company’s
fiscal year ending April 2, 2022 due to the closing of audits and the statute of limitations expiring in various jurisdictions. The decrease, pertaining
primarily to federal and state credits and state tax, is estimated to be $1,513.
The Company files income tax returns in numerous U.S. and foreign jurisdictions, with returns subject to examination for varying periods, but
generally back to and including the year ending April 2, 2005. The Company is no longer subject to U.S. federal tax examination by the Internal Revenue
Service for years ending before March 31, 2018.
57
16. Stockholders’ Equity
Long-Term Equity Incentive Plans
2013 Long-Term Incentive Plan
The 2013 Long-Term Incentive Plan provides for grants of stock options, stock appreciation rights, restricted stock and performance awards. The
purpose of the Plan is to provide our directors, officers and other employees and persons who engage in services for us with incentives to maximize
stockholder value and otherwise contribute to our success and to enable us to attract, retain and reward the best available persons for positions of
responsibility.
1,500,000 shares of common stock were authorized for issuance under the Plan, subject to adjustment in the event of a reorganization, stock split,
merger or similar change in the Company’s corporate structure or in the outstanding shares of common stock. The Company may grant shares of restricted
stock to its employees and directors in the future under the Plan. The Company’s Compensation Committee administers the Plan. The Company’s Board
also has the authority to administer the Plan and to take all actions that the Compensation Committee is otherwise authorized to take under the Plan. The
terms and conditions of each award made under the Plan, including vesting requirements, is set forth consistent with the Plan in a written agreement with
the grantee.
2017 Long-Term Incentive Plan
The 2017 Long-Term Incentive Plan provides for grants of stock options, stock appreciation rights, restricted stock and performance awards.
Directors, officers and other employees and persons who engage in services for the Company are eligible for grants under the Plan. The purpose of the Plan
is to provide these individuals with incentives to maximize stockholder value and otherwise contribute to the Company’s success and to enable the
Company to attract, retain and reward the best available persons for positions of responsibility.
1,500,000 shares of common stock were authorized for issuance under the Plan, subject to adjustment in the event of a reorganization, stock split,
merger or similar change in the Company’s corporate structure or in the outstanding shares of common stock. The Company may grant shares of restricted
stock to its employees and directors in the future under the Plan. The Company’s Compensation Committee administers the Plan. The Company’s Board
also has the authority to administer the Plan and to take all actions that the Compensation Committee is otherwise authorized to take under the Plan. The
terms and conditions of each award made under the Plan, including vesting requirements, is set forth consistent with the Plan in a written agreement with
the grantee.
58
Stock Options. Under the 2013 and 2017 Long-Term Incentive Plans, the Compensation Committee or the Board may approve the award of grants
of incentive stock options and other non-qualified stock options. The Compensation Committee also has the authority to approve the grant of options that
will become fully vested and exercisable automatically upon a change in control. The Compensation Committee may not, however, approve an award to
any one person in any calendar year for options to purchase common stock equal to more than 10% of the total number of shares authorized under the
relevant Plan, and it may not approve an award of incentive options first exercisable in any calendar year whose underlying shares have a fair market value
greater than $100 determined at the time of grant. The Compensation Committee will approve the exercise price and term of any option in its discretion;
however, the exercise price may not be less than 100% of the fair market value of a share of common stock on the date of grant. Under the 2013 Long-Term
Incentive Plan, any incentive stock option must be exercised within seven years of the date of grant. Under the 2017 Long-Term Incentive Plan, any
incentive stock option must be exercised within seven years of the date of grant. Under both Plans, the exercise price of an incentive option awarded to a
person who owns stock constituting more than 10% of the Company’s voting power may not be less than 110% of such fair market value on such date and
the option must be exercised within five years of the date of grant. There were 237,228 outstanding options to purchase shares of common stock granted
under the 2013 Long-Term Incentive Plan, 113,734 of which were exercisable. There were 458,174 outstanding options to purchase shares of common
stock granted under the 2017 Long-Term Incentive Plan, 89,575 of which were exercisable.
Restricted Stock. Under the 2013 and 2017 Long-Term Incentive Plans, the Compensation Committee may approve the award of restricted stock
subject to the conditions and restrictions, and for the duration that it determines in its discretion. Under the 2017 Long-Term Incentive Plan, the number of
shares that may be used for restricted stock or restricted unit grants under the Plan may not exceed 50% of the total authorized number of shares under the
Plan. As of April 3, 2021, there were 63,459 and 183,391 shares of restricted stock outstanding under the 2013 and 2017 Long-Term Incentive Plans,
respectively.
Stock Appreciation Rights. The Compensation Committee may approve the grant of stock appreciation rights, or SARs, subject to the terms and
conditions contained in the Plan. Under the 2013 and 2017 Long-Term Incentive Plans, the exercise price of a SAR must equal the fair market value of a
share of the Company’s common stock on the date the SAR was granted. Upon exercise of a SAR, the grantee will receive an amount in shares of our
common stock equal to the difference between the fair market value of a share of common stock on the date of exercise and the exercise price of the SAR,
multiplied by the number of shares as to which the SAR is exercised. There were no SARs issued or outstanding under the 2013 or 2017 Long-Term
Incentive Plans as of April 3, 2021.
Performance Awards. The Compensation Committee may approve the grant of performance awards contingent upon achievement by the grantee
or by the Company, of set goals and objectives regarding specified performance criteria, over a specified performance cycle. Awards may include specific
dollar-value target awards, performance units, the value of which is established at the time of grant, and/or performance shares, the value of which is equal
to the fair market value of a share of common stock on the date of grant. The value of a performance award may be fixed or fluctuate on the basis of
specified performance criteria. A performance award may be paid out in cash and/or shares of common stock or other securities. There were no
performance awards issued or outstanding under the 2013 or 2017 Long-Term Incentive Plans as of April 3, 2021.
Amendment and Termination of the Plans. The Board may amend or terminate the 2013 and 2017 Long-Term Incentive Plans at its discretion,
except that no amendment will become effective without prior approval of the Company’s stockholders if such approval is necessary for continued
compliance with the performance-based compensation exception of Section 162(m) of the Internal Revenue Code or any stock exchange listing
requirements. Subject to the provisions of an Award Agreement, which may be more restrictive, no termination of the Plan shall materially and adversely
affect any of the rights or obligations of any person, without his or her written consent, under any grant of options or other incentives theretofore granted
under the Plan.
59
A summary of the status of the Company’s stock options outstanding as of April 3, 2021 and changes during the year then ended is presented
below. All cashless exercises of options and warrants are handled through an independent broker.
Outstanding, March 28, 2020
Awarded
Exercised
Forfeitures
Outstanding, April 3, 2021
Exercisable, April 3, 2021
Number Of
Common
Stock
Options
Weighted
Average
Exercise
Price
Weighted
Average
Contractual
Life (Years)
Intrinsic
Value
713,911 $
137,210
(141,767)
(13,952)
695,402 $
111.41
145.59
80.24
124.90
124.24
4.5 $
9,270
4.4 $
51,391
203,309 $
110.77
3.6 $
17,763
The fair value for the Company’s options was estimated at the date of grant using the Black-Scholes option pricing model with the following
weighted-average assumptions, which are updated to reflect current expectations of the dividend yield, expected life, risk-free interest rate and using
historical volatility to project expected volatility:
Dividend yield
Expected weighted-average life (yrs.)
Risk-free interest rate
Expected volatility
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
0.00%
5.0
0.35%
41.35%
0.00%
5.0
1.82%
26.93%
0.00%
5.0
2.77%
25.16%
The weighted average fair value per share of options granted was $52.78 in fiscal 2021, $39.34 in fiscal 2020 and $37.02 in fiscal 2019.
The Company recorded $4,494 (net of taxes of $1,351) in compensation in fiscal 2021 related to option awards. As of April 3, 2021, there was
$15,079 of unrecognized compensation costs related to options which is expected to be recognized over a weighted average period of 3.3 years. The total
intrinsic value of options exercised in fiscal 2021, 2020 and 2019 was $12,726, $15,273 and $26,060, respectively.
Of the total awards outstanding at April 3, 2021, 687,092 are either fully vested or are expected to vest. These shares have a weighted average
exercise price of $124.06, an intrinsic value of $50,897 and a weighted average contractual term of 4.4 years.
A summary of the status of the Company’s restricted stock outstanding as of April 3, 2021 and the changes during the year then ended is presented
below.
Non-vested, March 28, 2020
Granted
Vested
Forfeitures
Non-vested, April 3, 2021
Number Of
Restricted
Stock
Shares
288,710 $
94,205
(128,998)
(7,067)
246,850 $
Weighted-
Average
Grant Date
Fair Value
125.54
153.70
117.34
131.72
140.39
The weighted average fair value per share of restricted stock awards granted was $153.70 in fiscal 2021, $145.72 in fiscal 2020 and $133.05 in
fiscal 2019.
The Company recorded $11,881 (net of taxes of $3,573) in compensation in fiscal 2021 related to restricted stock awards. These awards were
valued at the fair market value of the Company’s common stock on the date of issuance and are being amortized as expense over the applicable vesting
period. The total fair value of restricted stock awards that vested during fiscal 2021, 2020, and 2019 was $19,470, $19,916 and $15,819, respectively.
Unrecognized expense for restricted stock was $24,848 at April 3, 2021. This cost is expected to be recognized over a weighted average period of
approximately 2.7 years.
60
17. Commitments and Contingencies
As of April 3, 2021, approximately 8.2% of the Company’s hourly employees in the U.S. and abroad were represented by labor unions.
The Company enters into U.S. government contracts and subcontracts that are subject to audit by the U.S. government. In the opinion of the
Company’s management, the results of such audits, if any, are not expected to have a material impact on the cash flows, financial condition or results of
operations of the Company.
For fiscal 2021, 2020 and 2019, there were no audits by the U.S. government, the results of which, in the opinion of the Company’s management,
had a material impact on the cash flows, financial condition or results of operations of the Company.
The Company is subject to federal, state and local environmental laws and regulations, including those governing discharges of pollutants into the
air and water, the storage, handling and disposal of wastes and the health and safety of employees. The Company also may be liable under the
Comprehensive Environmental Response, Compensation, and Liability Act or similar state laws for the costs of investigation and cleanup of contamination
at facilities currently or formerly owned or operated by the Company, or at other facilities at which the Company may have disposed of hazardous
substances. In connection with such contamination, the Company may also be liable for natural resource damages, U.S. government penalties and claims
by third parties for personal injury and property damage. Agencies responsible for enforcing these laws have authority to impose significant civil or
criminal penalties for non-compliance. The Company believes it is currently in material compliance with all applicable requirements of environmental
laws. The Company does not anticipate material capital expenditures for environmental compliance in fiscal years 2022 or 2023.
Investigation and remediation of contamination is ongoing at some of the Company’s sites. In particular, state agencies have been overseeing
groundwater monitoring activities at the Company’s facility in Hartsville, South Carolina and a corrective action plan at the Company’s property in
Clayton, Georgia. At Hartsville, the Company is monitoring low levels of contaminants in the groundwater caused by former operations. Plans are
currently underway to conclude remediation and monitoring activities. In connection with the purchase of the Fairfield, Connecticut facility in 1996, the
Company agreed to assume responsibility for completing clean-up efforts previously initiated by the prior owner. The Company submitted data to the state
that the Company believes demonstrates that no further remedial action is necessary, although the state may require additional clean-up or monitoring. In
connection with the purchase of the Company’s Clayton, Georgia property, the Company agreed to take assignment of the hazardous waste permit covering
such facility and to assume certain responsibilities to implement a corrective action plan concerning the remediation of certain soil and groundwater
contamination present at that facility. The corrective action plan is ongoing. Although there can be no assurance, the Company does not expect the costs
associated with the above sites to be material.
From time to time, we are involved in litigation and administrative proceedings which arise in the ordinary course of our business. We do not
believe that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse
effect on our business, financial condition, operating results, cash flow or prospects.
18. Other, Net
Other, net is comprised of the following:
Plant consolidation and restructuring costs
Acquisition costs
Provision for doubtful accounts
Amortization of intangibles
Loss (gain) on disposal of assets
Other expense (income)
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
$
2,862 $
—
480
10,217
1,314
1,775
16,648 $
1,087 $
901
263
9,612
(1,227)
(883)
9,753 $
16,906
—
203
9,666
853
(514)
27,114
61
19. Reportable Segments
The Company operates through operating segments for which separate financial information is available, and for which operating results are
evaluated regularly by the Company’s chief operating decision maker in determining resource allocation and assessing performance. Those operating
segments with similar economic characteristics and that meet all other required criteria, including nature of the products and production processes,
distribution patterns and classes of customers, are aggregated as reportable segments.
The Company has four reportable business segments, Plain Bearings, Roller Bearings, Ball Bearings and Engineered Products, which are
described below.
Plain Bearings. Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes, including rod
end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are
primarily used to rectify inevitable misalignments in various mechanical components.
Roller Bearings. Roller bearings are anti-friction bearings that use rollers instead of balls. The Company manufactures four basic types of roller
bearings: heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.
Ball Bearings. The Company manufactures four basic types of ball bearings: high precision aerospace, airframe control, thin section and
commercial ball bearings which are used in high-speed rotational applications.
Engineered Products. Engineered Products consist of highly engineered hydraulics, fasteners, collets, tool holders and precision components used
in aerospace, marine and industrial applications.
The accounting policies of the reportable segments are the same as those described in Note 2 “Summary of Significant Accounting Policies.”
Segment performance is evaluated based on segment net sales and gross margin. Items not allocated to segment operating income include corporate
administrative expenses and certain other amounts. Identifiable assets by reportable segment consist of those directly identified with the segment’s
operations.
62
Net External Sales
Plain
Roller
Ball
Engineered Products
Gross Margin
Plain
Roller
Ball
Engineered Products
Selling, General and Administrative Expenses
Plain
Roller
Ball
Engineered Products
Corporate
Operating Income
Plain
Roller
Ball
Engineered Products
Corporate
Total Assets
Plain
Roller
Ball
Engineered Products
Corporate
Capital Expenditures
Plain
Roller
Ball
Engineered Products
Corporate
Depreciation & Amortization
Plain
Roller
Ball
Engineered Products
Corporate
Geographic External Sales
Domestic
Foreign
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
293,990 $
91,657
83,704
139,633
608,984 $
118,535 $
31,616
37,058
46,897
234,106 $
21,630 $
4,744
5,354
15,388
58,884
106,000 $
92,080 $
26,048
31,592
25,593
(63,855)
111,458 $
358,291 $
132,642
74,231
162,297
727,461 $
144,958 $
55,519
33,041
55,585
289,103 $
26,256 $
6,359
6,481
17,739
65,730
122,565 $
115,028 $
48,615
26,454
32,266
(65,578)
156,785 $
323,251
143,832
72,307
163,126
702,516
129,297
61,559
29,846
55,951
276,653
25,617
6,266
6,428
19,664
59,529
117,504
100,048
55,148
23,222
16,183
(62,566)
132,035
415,222 $
152,323
68,126
513,962
284,627
1,434,260 $
423,925 $
179,711
70,138
504,649
143,489
1,321,912 $
393,014
166,733
66,443
458,058
63,119
1,147,367
4,530 $
2,099
1,375
3,619
149
11,772 $
10,518 $
4,161
2,351
12,484
3,230
32,744 $
13,695 $
6,362
2,420
14,645
175
37,297 $
10,230 $
4,339
2,199
11,442
3,210
31,420 $
13,185
5,328
3,276
18,715
842
41,346
9,849
4,029
1,971
10,412
3,397
29,658
546,018 $
62,966
608,984 $
651,381 $
76,080
727,461 $
633,381
69,135
702,516
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
63
Geographic Long-Lived Assets
Domestic
Foreign
Intersegment Sales
Plain
Roller
Ball
Engineered Products
April 3,
2021
Fiscal Year Ended
March 28,
2020
March 30,
2019
$
$
$
$
188,366 $
55,562
243,928 $
190,215 $
58,584
248,799 $
165,533
42,362
207,895
5,547 $
8,812
2,554
32,687
49,600 $
6,687 $
15,579
2,947
44,964
70,177 $
6,292
14,650
3,363
38,948
63,253
The net loss of $16,544 related to the sale of the Miami division during fiscal 2019 was included within the Engineered Products segment and was
recognized within other, net on the consolidated statements of operations. All intersegment sales are eliminated in consolidation.
64
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A. CONTROLS AND PROCEDURES
The Company’s management is responsible for establishing and maintaining effective disclosure controls and procedures, as defined under Rule
13a-15(e) of the Securities Exchange Act of 1934. As of the end of the period covered by this report, the Company performed an evaluation, under the
supervision and with the participation of the Company’s management, including its Chief Executive Officer and Chief Financial Officer, of the
effectiveness of the Company’s disclosure controls and procedures. Based upon that evaluation, the Company’s Chief Executive Officer and Chief
Financial Officer concluded that the Company’s disclosure controls and procedures provide reasonable assurance that the material information required to
be disclosed by the Company in the reports that it files or submits to the Securities and Exchange Commission under the Securities Exchange Act of 1934
is recorded, processed, summarized and reported within the time periods specified in the Commission’s rules and forms. No changes were made to the
Company’s internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934) during the last fiscal quarter
that materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting. The Company’s management
believes that its disclosure controls and procedures were effective as of April 3, 2021.
Management’s Report on Internal Control Over Financial Reporting
Management of RBC Bearings Incorporated is responsible for establishing and maintaining adequate internal control over financial reporting, as
such term is defined in Securities Exchange Act of 1934.
The Company’s internal control over financial reporting is supported by written policies and procedures that (i) pertain to the maintenance of
records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the Company’s assets; (ii) provide reasonable assurance
that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and
that receipts and expenditures of the Company are being made only in accordance with authorizations of the Company’s management and directors; and
(iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that
could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation
of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of
compliance with the policies or procedures may deteriorate.
Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we
conducted an evaluation of the effectiveness of the Company’s internal control over financial reporting as of April 3, 2021 as required by Securities
Exchange Act of 1934. In making this assessment, we used the criteria set forth in the framework in Internal Control-Integrated Framework (2013
Framework) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal
Control-Integrated Framework, our management concluded that our internal control over financial reporting was effective as of April 3, 2021.
The effectiveness of our internal control over financial reporting as of April 3, 2021 has been audited by Ernst & Young LLP, an independent
registered public accounting firm, as stated in their report which appears on the following page.
/s/ RBC Bearings Incorporated
Oxford, Connecticut
May 21, 2021
65
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of RBC Bearings Incorporated
Opinion on Internal Control over Financial Reporting
We have audited RBC Bearings Incorporated’s internal control over financial reporting as of April 3, 2021, based on criteria established in Internal Control
—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), (the COSO criteria). In
our opinion, RBC Bearings Incorporated (the Company) maintained, in all material respects, effective internal control over financial reporting as of April 3,
2021, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated
balance sheets of the Company as of April 3, 2021 and March 28, 2020, the related consolidated statements of operations, comprehensive income,
stockholders’ equity and cash flows for each of the three years in the period ended April 3, 2021 and the related notes and our report dated May 21, 2021
expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of
internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our
responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm
registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the
applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable
assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and
evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered
necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting
and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control
over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly
reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit
preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are
being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding
prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial
statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of
effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of
compliance with the policies or procedures may deteriorate.
/s/ Ernst & Young LLP
Stamford, Connecticut
May 21, 2021
66
ITEM 9B. OTHER INFORMATION
Board Committee Assignments
Audit Committee *
Alan B. Levine, Chairman
Michael H. Ambrose
Edward D. Stewart
Compensation Committee
Richard R. Crowell, Chairman
Alan B. Levine
Dolores J. Ennico
Nominating and Governance Committee
Edward D. Stewart
Dr. Steven H. Kaplan
* At least one member of the Audit Committee qualifies as an “audit committee financial expert” as defined by applicable SEC rules.
67
The information called for by Part III (Items 10, 11, 12, 13 and 14) of Form 10-K will be included in the Company’s Proxy Statement for its 2020
Annual Meeting of Shareholders, which the Company intends to file within 120 days after the close of its fiscal year ended April 3, 2021 and which is
incorporated herein by reference.
PART III
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) (1) Financial Statements
PART IV
The following Consolidated Financial Statements and Supplementary Data of the Company are included in Item 8, “Financial Statements and
Supplementary Data” of this Annual Report on Form 10-K:
Report of Independent Registered Public Accounting Firm;
Consolidated Balance Sheets at April 3, 2021 and March 28, 2020;
Consolidated Statements of Operations for the years ended April 3, 2021, March 28, 2020 and March 30, 2019;
Consolidated Statements of Comprehensive Income for the years ended April 3, 2021, March 28, 2020 and March 30, 2019;
Consolidated Statements of Stockholders’ Equity for the years ended April 3, 2021, March 28, 2020 and March 30, 2019;
Consolidated Statements of Cash Flows for the years ended April 3, 2021, March 28, 2020 and March 30, 2019; and
Notes to Consolidated Financial Statements.
(a) (2) Financial Statement Schedules
See Financial Statement Schedules under Item 15(c) of this Annual Report on Form 10-K
(a) (3) See Item 15(b) of this Annual Report on Form 10-K.
35
36
37
38
39
40
41
(b) The Exhibits required by Item 601 of Regulation S-K are filed as exhibits to this Annual Report on Form 10-K and indexed below immediately
following Item 15(c), which index is incorporated herein by reference.
(c) All Financial Statement Schedules are included in the Financial Statements and Supplementary Data under Item 15(a)(1) of this Annual Report on Form
10-K and incorporated herein by reference.
68
The following exhibits are filed as part of this Annual Report on Form 10-K. The exhibits that are indicated below as having been previously filed
by RBC Bearings Incorporated with the SEC are incorporated herein by reference. Our Commission file number is 333-124824.
Exhibit Index
Exhibit
Number
3.1
3.2
4.1
4.2
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
Description of Document
Amended and Restated Certificate of Incorporation of RBC Bearings Incorporated dated August 13, 2005 (filed with Amendment No. 4 to
Registration Statement on Form S-1 dated August 8, 2005).
Amended and Restated Bylaws of RBC Bearings Incorporated (filed as Exhibit 3.1 to Current Report on Form 8-K dated September 15,
2017).
Form of stock certificate for common stock (filed as Exhibit 4.3 to Amendment No. 3 to Registration Statement on Form S-1 dated August
4, 2005).
Description of Capital Stock (filed as Exhibit 4.1 to Quarterly Report on Form 10-Q dated November 1, 2019).
Form of Change in Control Letter Agreement for Named Executive Officers (filed as Exhibit 10.1 to Quarterly Report on Form 10-Q dated
February 1, 2010).
Change in Control Letter Agreement for Patrick S. Bannon (filed as Exhibit 10.1 to Current Report on Form 8-K dated November 3, 2017).
RBC Bearings Incorporated Amended and Restated 2013 Long Term Incentive Plan (filed as Exhibit 10.1 to Current Report on Form 8-K
dated August 21, 2013).
Credit Agreement, dated April 24, 2015, among Roller Bearing Company of America, Inc. as Borrower, RBC Bearings Incorporated and
various lenders signatory thereto (filed as Exhibit 10.1 to Current Report on Form 8-K dated April 24, 2015).
Guarantee, dated April 24, 2015, by and between RBC Bearings Incorporated, the subsidiary guarantors party thereto and Wells Fargo
Bank, National Association, as Administrative Agent (filed as Exhibit 10.2 to Current Report on Form 8-K dated April 24, 2015).
Security Agreement, dated April 24, 2015 by and between Roller Bearing Company of America, Inc., RBC Bearing Incorporated, the
subsidiary grantors party thereto and Wells Fargo Bank, National Association, as Collateral Agent for the benefit of the Secured Creditors
(filed as Exhibit 10.4 to Current Report on Form 8-K dated April 24, 2015).
Pledge Agreement, dated April 24, 2015, by and between Roller Bearing Company of America, Inc., RBC Bearings Incorporated, the
subsidiary pledgors party thereto and Wells Fargo Bank, National Association, as Collateral Agent for the benefit of the Secured Creditors
(filed as Exhibit 10.4 to Current Report on Form 8-K dated April 24, 2015).
Amendment No. 1 to Credit Agreement, dated as of January 31, 2019, among Roller Bearing Company of America, Inc., RBC Bearings
Incorporated, the subsidiary guarantors party thereto, the lenders party thereto, and Wells Fargo Bank, National Association, as
administrative agent for the lenders (filed as Exhibit 10.1 to Quarterly Report on Form 10-Q dated February 5, 2019).
69
10.9
10.10
10.11
10.12
21
23
31.1
31.2
32.1
32.2
Restated and Amended Employment Agreement, effective April 2, 2017, between RBC Bearings Incorporated and Michael J. Hartnett,
Ph.D. (filed as Exhibit 10.1 to Current Report on Form 8 K dated June 7, 2017).
Employment Agreement, effective April 2, 2017, between RBC Bearings Incorporated and Daniel A. Bergeron (filed as Exhibit 10.2 to
Current Report on Form 8 K dated June 7, 2017).
RBC Bearings Incorporated Executive Officer Performance Based Compensation Plan (filed as Exhibit 10.1 to Current Report on Form 8-K
dated July 27, 2017).
RBC Bearings Incorporated 2017 Long-Term Equity Incentive Plan (filed as Exhibit 10.2 to Current Report on Form 8-K dated July 27,
2017).
Subsidiaries of the Registrant.
Consent of Ernst & Young LLP.
Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley
Act of 2002.*
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act
of 2002.*
101.INS
101.SCH
101.CAL
101.DEF
101.LAB
101.PRE
XBRL Instance Document.
XBRL Taxonomy Extension Schema Document.
XBRL Taxonomy Extension Calculation Linkbase Document.
XBRL Taxonomy Extension Definition Linkbase Document.
XBRL Taxonomy Extension Label Linkbase Document.
XBRL Taxonomy Extension Presentation Linkbase Document.
* This certification is not deemed filed with the SEC and is not to be incorporated by reference into any of our filings under the Securities Act of 1933 or
the Securities Exchange Act of 1934 (whether made before or after the date of this Annual Report on Form 10-K) irrespective of any general
incorporation language contained in such filing.
70
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be
signed on its behalf by the undersigned, thereunto duly authorized.
SIGNATURES
RBC BEARINGS INCORPORATED
(Registrant)
By:
/s/ MICHAEL J. HARTNETT
Name: Michael J. Hartnett
Title: Chief Executive Officer
Date: Date: May 21, 2021
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed by the following persons on behalf of the
Registrant and in the capacities and on the dates indicated.
Signature
/s/ MICHAEL J. HARTNETT
Michael J. Hartnett
Date: May 21, 2021
/s/ DANIEL A. BERGERON
Daniel A. Bergeron
Date: May 21, 2021
/s/ ROBERT M. SULLIVAN
Robert M. Sullivan
Date: May 21, 2021
/s/ RICHARD R. CROWELL
Richard R. Crowell
Date: May 21, 2021
/s/ ALAN B. LEVINE
Alan B. Levine
Date: May 21, 2021
/s/ DOLORES J. ENNICO
Dolores J. Ennico
Date: May 21, 2021
/s/ EDWARD D. STEWART
Edward D. Stewart
Date: May 21, 2021
/s/ DR. STEVEN H. KAPLAN
Dr. Steven H. Kaplan
Date: May 21, 2021
/s/ MICHAEL H. AMBROSE
Michael H. Ambrose
Date: May 21, 2021
Title
Chairman, President and Chief Executive Officer
(Principal Executive Officer and Chairman)
Chief Operating Officer
Chief Financial Officer
(Principal Financial Officer)
Director
Director
Director
Director
Director
Director
71
Exhibit 21
Subsidiaries of the Registrant*
Roller Bearing Company of America, Inc. – Delaware
RBC Precision Products—Plymouth, Inc. – Delaware
Industrial Tectonics Bearings Corporation – Delaware
RBC Precision Products—Bremen, Inc. – Delaware
RBC Nice Bearings, Inc. – Delaware
RBC Lubron Bearing Systems, Inc. – Delaware
RBC Oklahoma, Inc. – Delaware
RBC Aircraft Products, Inc. – Delaware
RBC Southwest Products, Inc. – Delaware
All Power Manufacturing Co. – California
RBC Aerostructures LLC – South Carolina
Western Precision Aero LLC – California
Climax Metal Products Company – Ohio
RBC Turbine Components LLC – Delaware
Sargent Aerospace and Defense LLC – Delaware
Airtomic LLC – Delaware
Sonic Industries, Inc. – California
RBC de Mexico S DE RL DE CV – Mexico
Schaublin Holding SA – Switzerland
Schaublin SA – Switzerland
RBC France SAS – France
Shanghai Representative Office of Roller Bearing Company of America, Inc. – People’s Republic of China
RBC Bearings U.K. Limited – U.K.
RBC Bearings Polska sp. z o.o. – Poland
All Power de Mexico, S DE RL DE CV – Mexico
RBC Bearings Canada, Inc. – Canada
Schaublin GmbH – Germany
Vianel Holding AG – Switzerland
Beck Bühler Mutschler Capital AG – Switzerland
Bär und Mettler AG – Switzerland
MBM Monstein Bär Mettler Modulare Werkzeugsysteme AG – Switzerland
Swiss Tool Systems AG - Switzerland
* All of which are, directly or indirectly, wholly-owned by the registrant.
We consent to the incorporation by reference in the following Registration Statements:
Consent of Independent Registered Public Accounting Firm
(1) Registration Statement (Form S-8 No. 333-221329) pertaining to the RBC Bearings Incorporated 2017 Long-Term Equity Incentive Plan and
(2) Registration Statement (Form S-8 No. 333-192164) pertaining to the RBC Bearings Incorporated 2013 Long-Term Equity Incentive Plan
of our reports dated May 21, 2021, with respect to the consolidated financial statements of RBC Bearings Incorporated and the effectiveness of internal
control over financial reporting of RBC Bearings Incorporated included in this Annual Report (Form 10-K) of RBC Bearings Incorporated for the year
ended April 3, 2021.
Exhibit 23
/s/ Ernst & Young LLP
Stamford, Connecticut
May 21, 2021
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
Exhibit 31.1
I, Dr. Michael J. Hartnett, certify that:
1. I have reviewed this Report on Form 10-K of RBC Bearings Incorporated;
2. Based on my knowledge, this Report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this Report;
3. Based on my knowledge, the financial statements, and other financial information included in this Report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this Report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange
Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the
registrant and have:
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this Report is being prepared;
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles; and
c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this Report based on such evaluation; and
d) disclosed in this Report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: May 21, 2021
By:
/s/ Michael J. Hartnett
Michael J. Hartnett
President and Chief Executive Officer
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
Exhibit 31.2
I, Robert M. Sullivan, certify that:
1. I have reviewed this Report on Form 10-K of RBC Bearings Incorporated;
2. Based on my knowledge, this Report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this Report;
3. Based on my knowledge, the financial statements, and other financial information included in this Report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this Report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange
Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the
registrant and have:
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this Report is being prepared;
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles; and
c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this Report based on such evaluation; and
d) disclosed in this Report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: May 21, 2021
By:
/s/ Robert M. Sullivan
Robert M. Sullivan
Vice President and Chief Financial Officer
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO
18 U.S.C SECTION 1350
Exhibit 32.1
In connection with the Annual Report of RBC Bearings Incorporated (the “Company”) Form 10-K for the year ended April 3, 2021, as filed with the
Securities and Exchange Commission on the date hereof (the “Report”), the undersigned, Dr. Michael J. Hartnett, the President and Chief Executive Officer
of the Company, pursuant to 18 U.S.C. §1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, hereby certifies to the best of his
knowledge that:
(i) the Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
Dated: May 21, 2021
/s/ Michael J. Hartnett
Michael J. Hartnett
President and Chief Executive Officer
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350
Exhibit 32.2
In connection with the Annual Report of RBC Bearings Incorporated (the “Company”) Form 10-K for the year ended April 3, 2021, as filed with the
Securities and Exchange Commission on the date hereof (the “Report”), the undersigned, Robert M. Sullivan, Chief Financial Officer, of the Company,
pursuant to 18 U.S.C. §1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, hereby certifies to the best of his knowledge that:
(i) the Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
Dated: May 21, 2021
/s/ Robert M. Sullivan
Robert M. Sullivan
Vice President and Chief Financial Officer