Table of Contents
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
(Mark One)
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended August 31, 2017
or
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to
Commission File Number 0-22496
SCHNITZER STEEL INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)
OREGON
(State of Incorporation)
93-0341923
(I.R.S. Employer Identification No.)
299 SW Clay Street, Suite 350
Portland, Oregon
(Address of principal executive offices)
97201
(Zip Code)
Registrant’s telephone number, including area code: (503) 224-9900
Securities registered pursuant to Section 12(b) of the Act:
Class A Common Stock, $1.00 par value
(Title of Each Class)
The NASDAQ Global Select Market
(Name of each Exchange on which registered)
Securities registered pursuant to Section 12(g) of the Act:
None
No
No
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act
of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject
to such filing requirements for the past 90 days. Yes
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data
File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or
for such shorter period that the registrant was required to submit and post such files). Yes
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will
not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this
Form 10-K or any amendment to this Form 10-K.
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company,
or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging
growth company" in Rule 12b-2 of the Exchange Act. (check one)
No
No
Large accelerated filer
Accelerated filer
Non-accelerated filer
Smaller reporting company
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes
The aggregate market value of the registrant’s outstanding common stock held by non-affiliates on February 28, 2017 was $623,145,280.
The registrant had 26,862,569 shares of Class A common stock, par value of $1.00 per share, and 200,000 shares of Class B common stock, par
value of $1.00 per share, outstanding as of October 20, 2017.
No
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s definitive Proxy Statement for the January 2018 Annual Meeting of Shareholders are incorporated by reference into
Part III of this report.
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
FORM 10-K
TABLE OF CONTENTS
FORWARD LOOKING STATEMENTS
PART I
Business
Item 1
Item 1A Risk Factors
Item 1B Unresolved Staff Comments
Item 2
Properties
Item 3
Item 4
Legal Proceedings
Mine Safety Disclosures
PART II
Item 5
Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of
Equity Securities
Item 6
Selected Financial Data
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Item 7
Item 7A Quantitative and Qualitative Disclosures about Market Risk
Item 8
Financial Statements and Supplementary Data
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
Item 9
Item 9A Controls and Procedures
Item 9B Other Information
PART III
Item 10
Item 11
Item 12
Item 13
Item 14
PART IV
Item 15
Item 16
SIGNATURES
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships and Related Transactions, and Director Independence
Principal Accountant Fees and Services
Exhibits and Financial Statement Schedules
Form 10-K Summary
PAGE
1
2
13
22
23
23
24
25
27
28
50
51
95
95
95
96
97
97
97
97
98
102
103
Table of Contents
FORWARD-LOOKING STATEMENTS
Statements and information included in this Annual Report on Form 10-K by Schnitzer Steel Industries, Inc. (the
“Company”) that are not purely historical are forward-looking statements within the meaning of Section 21E of the
Securities Exchange Act of 1934 and are made pursuant to the “safe harbor” provisions of the Private Securities Litigation
Reform Act of 1995. Except as noted herein or as the context may otherwise require, all references to “we,” “our,” “us,”
and “SSI” refer to the Company and its consolidated subsidiaries.
Forward-looking statements in this Annual Report on Form 10-K include statements regarding future events or our
expectations, intentions, beliefs and strategies regarding the future, which may include statements regarding trends,
cyclicality and changes in the markets we sell into; the Company's outlook, growth initiatives or expected results or
objectives, including pricing, margins, sales volumes and profitability; strategic direction or goals; targets; changes to
manufacturing and production processes; the cost of and the status of any agreements or actions related to our compliance
with environmental and other laws; expected tax rates, deductions and credits; the realization of deferred tax assets;
planned capital expenditures; liquidity positions; ability to generate cash from continuing operations; the potential impact
of adopting new accounting pronouncements; obligations under our retirement plans; benefits, savings or additional costs
from business realignment, cost containment and productivity improvement programs; and the adequacy of accruals.
Forward-looking statements by their nature address matters that are, to different degrees, uncertain, and often contain
words such as “outlook,” “target,” “aim,” “believes,” “expects,” “anticipates,” “intends,” “assumes,” “estimates,”
“evaluates,” “may,” “will,” “should,” “could,” “opinions,” “forecasts,” “projects,” “plans,” “future,” “forward,”
“potential,” “probable,” and similar expressions. However, the absence of these words or similar expressions does not mean
that a statement is not forward-looking.
We may make other forward-looking statements from time to time, including in reports filed with the Securities and
Exchange Commission, press releases, presentations and on public conference calls. All forward-looking statements we
make are based on information available to us at the time the statements are made, and we assume no obligation to update
any forward-looking statements, except as may be required by law. Our business is subject to the effects of changes in
domestic and global economic conditions and a number of other risks and uncertainties that could cause actual results to
differ materially from those included in, or implied by, such forward-looking statements. Some of these risks and
uncertainties are discussed in "Item 1A. Risk Factors" of Part I of this Form 10-K. Examples of these risks include: potential
environmental cleanup costs related to the Portland Harbor Superfund site or other locations; the cyclicality and impact
of general economic conditions; instability in international markets; volatile supply and demand conditions affecting prices
and volumes in the markets for both our products and raw materials we purchase; imbalances in supply and demand
conditions in the global steel industry; the impact of goodwill impairment charges; the impact of long-lived asset and cost
and equity method investment impairment charges; inability to sustain the benefits from productivity and restructuring
initiatives; difficulties associated with acquisitions and integration of acquired businesses; customer fulfillment of their
contractual obligations; increases in the relative value of the U.S. dollar; the impact of foreign currency fluctuations;
potential limitations on our ability to access capital resources and existing credit facilities; restrictions on our business and
financial covenants under our bank credit agreement; the impact of consolidation in the steel industry; inability to realize
expected benefits from investments in technology; freight rates and the availability of transportation; the impact of
equipment upgrades, equipment failures and facility damage on production; product liability claims; the impact of legal
proceedings and legal compliance; the adverse impact of climate change; the impact of not realizing deferred tax assets;
the impact of tax increases and changes in tax rules; the impact of one or more cybersecurity incidents; environmental
compliance costs and potential environmental liabilities; inability to obtain or renew business licenses and permits or renew
facility leases; compliance with greenhouse gas emission laws and regulations; reliance on employees subject to collective
bargaining agreements; and the impact of the underfunded status of multiemployer plans in which we participate.
1 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
PART I
ITEM 1. BUSINESS
General
Founded in 1906, Schnitzer Steel Industries, Inc. ("SSI"), an Oregon corporation, is one of North America’s largest recyclers of
ferrous and nonferrous scrap metal, including end-of-life vehicles, and a manufacturer of finished steel products. Worldwide
demand for recycled scrap metal is driven primarily by steel production levels. Steel mill production using electric arc furnace
(“EAF”) technology relies on recycled scrap metal as its primary feedstock, and steel manufacturing using blast furnace technology
also uses recycled scrap metal for a portion of its raw materials. Steel mills around the world, including those in the North American
domestic market in which our own steel mill operates, are the primary end markets for our recycled scrap metal. Our steel mill in
Oregon produces finished steel products using internally sourced recycled scrap metal as the primary raw material and sells to
industrial customers primarily in North America.
Prior to the fourth quarter of fiscal 2017, our internal organizational and reporting structure supported two operating and reportable
segments: the Auto and Metals Recycling ("AMR") business and the Steel Manufacturing Business ("SMB"). In the fourth quarter
of fiscal 2017, in accordance with our plan announced in June 2017, we modified our internal organizational and reporting structure
to combine our steel manufacturing operations, which had been reported as our SMB segment, with our Oregon metals recycling
operations, which had been reported within our AMR segment, forming a new division named Cascade Steel and Scrap ("CSS").
The Oregon metals recycling operations include our collection, shredding, and export facilities in Portland, Oregon, and also
include four metals recycling feeder yard operations located in Oregon and Southern Washington and one joint venture ownership
interest. The Oregon metals recycling operations source substantially all of the scrap raw material needs of our steel manufacturing
operations. This change in organizational structure is intended to enhance our flexibility, generate internal synergies, and enable
us to more effectively adjust to market changes across our recycling and steel manufacturing operations. We began reporting on
this new segment structure in the fourth quarter of fiscal 2017 as reflected in this Annual Report on Form 10-K. The segment data
for the comparable periods presented has been recast to conform to the current period presentation for all activities of the reorganized
segments. Recasting this historical information did not have an impact on the consolidated financial performance of SSI for any
of the periods presented.
SSI collects and recycles autobodies, rail cars, home appliances, industrial machinery, manufacturing scrap and construction and
demolition scrap through its 97 auto and metals recycling facilities. We source material through well-developed, regional supply
chains that collect scrap from large and small businesses and individuals. Our largest source of autobodies is our own network of
53 retail self-service auto parts stores, which operate under the commercial brand-name Pick-n-Pull. All of our auto parts stores
are reported within the AMR segment, and a majority of the stores are located in close geographic proximity to our regional metals
recycling operations which have large-scale shredders and deep water port access. The level of vertical integration of our auto
parts stores and metals recycling operations provides for efficient processing of salvaged automobiles into recycled metal products
for new metal production in steel mills and smelters globally.
We process recycled metals ranging from iron and steel to aluminum, copper, lead, stainless steel and zinc for use in the manufacture
of new products. With scrap recycling facilities located in 23 States, Puerto Rico and Western Canada, we are well-positioned to
efficiently collect scrap metal throughout North America and deliver recycled metal products to customers around the world from
our seven deep water ports, and also to our steel mill in Oregon. In fiscal 2017, we sold our products to customers located in 24
countries, including the United States ("U.S.") and Canada, and we sold to external customers or delivered to our steel mill an
aggregate of 3.6 million tons of ferrous recycled scrap metal and sold 585 million pounds of nonferrous recycled scrap metal to
external customers.
AMR is our largest segment, representing 80% of our total revenues from sales to external customers in fiscal 2017. AMR generated
91% of its revenues in fiscal 2017 from sales of ferrous and nonferrous scrap metal, with the remainder generated from retail auto
parts and other sales. AMR's revenues from sales of recycled scrap metal, disaggregated by major product category, were 68%
ferrous scrap metal and 32% nonferrous scrap metal in fiscal 2017. The remainder of our revenues from external scrap metal sales
are generated by our metals recycling operations reported within the CSS segment. The significant majority of ferrous scrap metal
processed by the CSS metals recycling operations is used by our steel mill to produce finished steel products, and a minority
portion is sold to the export market.
CSS produces finished steel products such as rebar, wire rod, coiled rebar, merchant bar and other specialty products using ferrous
recycled scrap metal and other raw materials. CSS's finished steel products are primarily used in nonresidential and infrastructure
construction in North America. In fiscal 2017, CSS sold 496 thousand short tons of finished steel products.
2 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Tabular presentation of our active recycling and steel facilities by geographic region and segment is as follows:
Auto Parts
Stores
Metals
Recycling
Facilities(1)
Total
Recycling
Facilities
Large-Scale
Shredders(2)
Deep
Water
Ports
Steel
Facilities(3)
Segment
Northwest
WA, OR, MT
Southwest and Hawaii
CA, NV, UT, HI
Midwest and South
IL, IN, OH, MO, KS, TX, AR
Northeast
MA, ME, NH, RI
Southeast and Puerto Rico
GA, AL, TN, FL, VA, PR
Western Canada
BC, AB
Total
_____________________
(1) Excludes joint venture facilities.
7
—
22
—
15
2
3
4
53
3
5
7
—
—
9
16
4
44
10
5
29
—
15
11
19
8
97
1
1
2
—
—
1
1
—
6
1
1
2
—
—
2
1
—
7
—
1
—
1
—
—
—
—
2
AMR
CSS
AMR
CSS
AMR
AMR
AMR
AMR
(2) All large-scale shredding operations employ advanced nonferrous extraction and separation equipment.
(3)
Includes one steel mini-mill in Oregon and one distribution center in California.
During the past five years, we implemented a number of cost reduction, productivity improvement, and restructuring initiatives
to more closely align our business with market conditions. The combined benefit of the measures initiated since the beginning of
fiscal 2015 represents a targeted annual improvement to operating performance of approximately $95 million. In fiscal 2017, we
achieved approximately $95 million in combined benefits related to these measures, compared to approximately $78 million and
$28 million of benefits in fiscal 2016 and 2015, respectively. In total, we have achieved approximately $160 million in combined
annual benefits to operating performance since announcing the initial phase of these cost savings and productivity initiatives at
the end of fiscal 2012.
We incurred restructuring charges and other exit-related activities during fiscal 2017, 2016, and 2015 in connection with cost
reduction, productivity improvement, and restructuring initiatives. See Management's Discussion and Analysis of Financial
Condition and Results of Operations in Part II, Item 7 of this report for further discussion of restructuring initiatives, benefits and
costs.
See Note 18 – Segment Information in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report for a
discussion of the primary activities of each reportable segment, total assets by reportable segment, operating results from continuing
operations, revenues from external customers and concentration of sales to foreign countries.
AMR
Business
AMR sells and brokers ferrous recycled scrap metal (containing iron) to foreign and domestic steel producers and nonferrous
recycled scrap metal (not containing iron) to both foreign and domestic markets. AMR buys, collects, processes and recycles
autobodies, rail cars, home appliances, industrial machinery, manufacturing scrap and construction and demolition scrap through
its 92 auto and metals recycling facilities. Our largest source of autobodies is our own network of retail auto parts stores, which
operate under the commercial brand-name Pick-n-Pull. AMR procures salvaged vehicles and sells serviceable used auto parts
from these vehicles through its 53 self-service auto parts stores located across the U.S. and Western Canada. Upon acquiring a
salvaged vehicle, we remove catalytic converters, aluminum wheels and batteries for separate processing and sale prior to placing
the vehicle in our retail lot. After retail customers have removed desired parts from a vehicle, we remove remaining major component
parts containing ferrous and nonferrous materials such as engines, transmissions and alternators, which are primarily sold to
wholesalers. The remaining autobodies are crushed and shipped to our metals recycling facilities to be shredded, or sold to third
parties where geographically more economical.
3 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
To prepare scrap metal, we crush, sort and bale the material by product grade for easier handling and sale. AMR processes mixed
and large pieces of scrap metal into smaller pieces by crushing, torching, shearing, shredding and sorting, resulting in scrap metal
pieces of a size, density and metal content required by customers to meet their production needs. The manufacturing process
includes physical separation of ferrous and nonferrous materials through automated and manual processes into various sub-
classifications, each of which has a value and metal content of importance to different customers for their end products. One of
the most efficient ways to process and sort recycled scrap metal is through the use of shredding and separation systems.
AMR operates six deep water port locations, five of which are equipped with large-scale shredders. AMR's largest port facilities
in Everett, Massachusetts; Oakland, California; and Tacoma, Washington each operate a mega-shredder with 7,000 to 9,000
horsepower. Our port facilities in Salinas, Puerto Rico and Kapolei, Hawaii each operate a shredder with 1,500 to 6,000 horsepower.
Our port facility in Providence, Rhode Island does not operate a shredder. Our shredders are designed to provide a denser product
and, in conjunction with advanced separation equipment, a more refined form of ferrous scrap metal which is used efficiently by
steel mills in the production of new steel. The shredding process reduces autobodies and other scrap metal into fist-size pieces of
shredded recycled scrap metal. The shredded material is then carried by conveyor under magnetized drums that attract the ferrous
scrap metal and separate it from the nonferrous scrap metal and other residue found in the shredded material, resulting in a consistent
and high-quality shredded ferrous product. The nonferrous scrap metal and residue then pass through a series of additional
mechanical sorting systems designed to separate the nonferrous metal from the residue. The remaining nonferrous metal is then
further sorted by product and size grade before being sold. AMR invests in nonferrous metal extraction and separation technologies
in order to maximize the recoverability of valuable nonferrous metal. AMR also purchases nonferrous metal directly from industrial
vendors and other suppliers and prepares this metal for shipment to customers by ship, rail or truck.
Products
AMR's primary products consist of recycled ferrous and nonferrous scrap metal. Ferrous recycled scrap metal is a key feedstock
used in the production of finished steel and is largely categorized into heavy melting steel (“HMS”), plate and structural (“bonus”)
and shredded scrap (“shred”), although there are various grades of each category depending on metal content and the size and
consistency of individual pieces. These attributes affect the product’s relative value. Our nonferrous products include aluminum,
copper, stainless steel, nickel, brass, titanium, lead, high temperature alloys and joint products such as zorba (primarily mixed
aluminum nonferrous material) and zurik (predominantly stainless steel).
Prior to the shredding process, AMR sells serviceable used auto parts from salvaged vehicles through its self-service auto parts
stores located across the U.S. and Western Canada. Each retail self-service store offers an extensive selection of vehicles (including
domestic and foreign cars, vans and light trucks) from which customers can remove parts. We employ proprietary information
technology systems to centrally manage and operate the geographically diverse network of auto parts stores, and we regularly
rotate the inventory to provide customers with greater access to parts. In general, we believe the list prices of auto parts at our
self-service stores are significantly lower than those offered at full-service auto dismantlers, retail car parts stores and car
dealerships.
Customers
AMR sells its ferrous and nonferrous recycled metal products globally to steel mills, foundries and smelters. AMR's self-service
auto parts stores also serve retail customers seeking to obtain serviceable used auto parts at a competitive price. Retail customers
remove the parts without the assistance of store employees and pay a listed price for the part. AMR also supplies a small portion
of its scrap metal to CSS's shredding operation in Portland, Oregon, the substantial majority of which is processed and delivered
to CSS's steel mill.
Presented below are AMR revenues by continent for the last three fiscal years ended August 31 (dollars in thousands):
North America(1)
Asia
Europe(2)
Africa
South America
Intercompany sales to CSS
$
571,620
593,332
167,576
11,932
19,158
(15,647)
Total (net of intercompany)
$
1,347,971
____________________________
(1)
(2)
Includes intercompany sales to CSS.
Includes sales to customers in Turkey.
2017
% of
Revenue
42 % $
44 %
12 %
1 %
1 %
(1)%
2016
429,997
433,415
174,038
—
23,142
(12,081)
1,048,511
$
% of
Revenue
41 % $
% of
Revenue
41 %
40 %
16 %
4 %
1 %
(2)%
2015
612,275
586,519
233,970
61,568
18,983
(33,029)
1,480,286
$
41 %
17 %
— %
2 %
(1)%
4 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
In fiscal 2017, the five countries from which AMR derived its largest revenues from external customers were the United States,
China, Turkey, Bangladesh, and India, which collectively accounted for 81% of total AMR external revenues. In fiscal 2016 and
2015, the five countries from which AMR derived its largest revenues from external customers accounted for 85% and 81%,
respectively, of total AMR external revenue. We attribute revenues from external customers to individual countries based on the
country in which the customer takes delivery of the goods.
AMR’s five largest external ferrous scrap metal customers accounted for 31% of external recycled ferrous metal revenues in fiscal
2017, compared to 37% and 33% in fiscal 2016 and 2015, respectively. AMR had no external customers that accounted for 10%
or more of consolidated revenues in fiscal 2017, 2016 and 2015. Total sales volumes of ferrous scrap metal vary from year-to-
year due to the level of demand, availability of supply, economic growth, infrastructure spending, relative currency values,
availability of credit and other factors. Ferrous scrap metal sales are primarily denominated in U.S. dollars, and nearly all of the
large shipments of ferrous scrap metal to foreign customers are supported by letters of credit.
The table below sets forth, on a revenue and volume basis, the amount of recycled ferrous scrap metal sold by AMR to foreign
and domestic customers, including sales to CSS, during the last three fiscal years ended August 31:
Ferrous Recycled Metal
2017
2016
2015
Foreign
Domestic
Total
Revenues(1)
608,339
$
234,883
Volume(2)
2,197
948
Revenues(1)
452,242
$
173,275
Volume(2)
2,040
859
Revenues(1)
653,440
$
280,617
$
843,222
3,145
$
625,517
2,899
$
934,057
Volume(2)
2,183
1,003
3,186
_____________________________
(1) Revenues stated in thousands of dollars.
(2) Volume stated in thousands of long tons (one long ton = 2,240 pounds).
AMR sells nonferrous recycled scrap metal to specialty steelmakers, foundries, aluminum sheet and ingot manufacturers, copper
refineries and smelters, brass and bronze ingot manufacturers, wholesalers, and wire and cable producers globally. AMR invests
in advanced separation technologies in order to extract higher nonferrous yields from the shredding process and to enhance the
separation of nonferrous metals in order to maximize the grade and value of the individual metals.
The table below sets forth, on a revenue and volume basis, the amount of recycled nonferrous scrap metal sold by AMR to foreign
and domestic customers during the last three fiscal years ended August 31:
Nonferrous Recycled Metal
2017
2016
2015
Foreign
Domestic
Total
Revenues(1)
216,362
$
178,615
$
394,977
Volume(2)
319,629
221,162
540,791
Revenues(1)
186,989
$
143,362
$
330,351
Volume(2)
290,430
183,307
473,737
Revenues(1)
260,209
$
189,606
$
449,815
Volume(2)
326,059
213,791
539,850
____________________________
(1) Revenues stated in thousands of dollars.
(2) Volume stated in thousands of pounds and volume information excludes PGM metals in catalytic converters.
AMR's retail auto parts sales account for less than 10% of SSI's consolidated revenues in all of the periods presented.
Pricing
Domestic and foreign prices for ferrous and nonferrous recycled scrap metal are generally based on prevailing market rates, which
differ by region, and are subject to market cycles that are influenced by worldwide demand from steel and other metal producers
as well as by the availability of materials that can be processed into saleable scrap metal, among other factors. Ferrous scrap metal
export sales contracts generally provide for shipment within 30 to 60 days after the price is agreed to which, in most cases, includes
freight. Nonferrous scrap metal sales contracts generally provide for shipment within 30 days after the price is agreed to, which
also typically includes freight.
5 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
AMR responds to changes in selling prices for processed metal by seeking to adjust purchase prices for unprocessed scrap metal
in order to manage the impact on its operating income. The spread between selling prices and the cost of purchased material is
subject to a number of factors, including differences in the market conditions between the domestic regions where unprocessed
scrap metal is acquired and the areas in the world to which the processed materials are sold, market volatility from the time the
selling price is agreed upon with the customer until the time the unprocessed material is purchased, and changes in the estimated
costs of transportation to the customer's facility. We believe AMR generally benefits from sustained periods of rising recycled
scrap metal selling prices, which allow it to better maintain or increase both operating income and unprocessed scrap metal flow
into its facilities. When recycled scrap metal selling prices decline for a sustained period, AMR's operating margins typically
compress.
The sales prices for auto parts from salvaged vehicles are deeply discounted from prevailing national new and refurbished sales
prices offered at full-service auto dismantlers, retail car parts stores and car dealerships. Our stores provide a list price, available
at each location and online. Prices for autobodies sold to third parties and for major component parts, such as engines, transmissions,
and alternators sold to wholesalers, are based on prevailing scrap market rates which differ by region and are subject to market
cycles. Prices for catalytic converters sold to third-party processors are based on prevailing market rates for the extracted metals.
By consolidating shipments of component parts and autobodies, we are able to optimize prices by focusing on larger wholesale
customers that pay a premium for volume and consistency of shipments.
Markets
Global production of finished steel products drives demand for materials used in the steel-making process, including ferrous
recycled scrap metal which is the primary feedstock used in EAFs and can also be used in blast furnaces to manufacture steel.
AMR exports ferrous recycled scrap metal primarily to countries in Asia, the Mediterranean region and North, Central and South
America. Ferrous exports made up approximately 70% of AMR's total ferrous sales volume in fiscal 2017, 2016, and 2015. In
fiscal 2017, the combination of improved U.S. and global economic growth and lower Chinese steel exports driven by higher
domestic demand and reductions in less efficient steel-making capacity contributed to improved demand and prices for ferrous
recycled scrap metal. We believe long-term demand for recycled metals will continue to be driven by factors including global
economic growth and an increased focus on environmental policies promoting natural resource conservation, lower greenhouse
gas emissions, and lower energy costs. We believe the significant environmental benefits and production efficiencies associated
with EAF steel-making, which uses scrap metal as a primary raw material, compared to blast furnace steel-making, which primarily
uses iron ore mined from natural resources, will positively contribute to worldwide long-term demand for ferrous recycled scrap
metal.
Nonferrous exports made up approximately 60% of AMR’s total nonferrous sales volumes in fiscal 2017, 2016 and 2015. China
and the U.S. have been the largest sales destinations in the nonferrous markets, unlike the ferrous market which is highly diversified
with no single country other than the U.S. being the dominant destination for our products from year to year.
Distribution
AMR delivers recycled ferrous and nonferrous scrap metal to foreign customers by ship and to domestic customers by barge, rail
and road transportation networks. Cost efficiencies are achieved by operating deep water terminal facilities in Everett,
Massachusetts; Oakland, California; Tacoma, Washington; and Providence, Rhode Island, all of which are owned, except for the
Providence, Rhode Island facility which is operated under a long-term lease. We also have access to deep water terminal facilities
at Kapolei, Hawaii and Salinas, Puerto Rico through public docks. AMR's deep water terminals enable us to load ferrous material
in large vessels capable of holding up to 50,000 tons for trans-oceanic shipments. Additionally, because we own most of the
terminal facilities at which we operate, AMR is not normally subject to the same berthing delays often experienced by users of
unaffiliated terminals. We believe that AMR’s loading costs are lower than at terminal facilities operated by third parties. From
time to time, AMR may enter into contracts of affreightment, which guarantee the availability of ocean going vessels, in order to
manage the risks associated with ship availability and freight costs.
Our nonferrous products are shipped in containers, which hold 20 to 30 tons, from container ports and rail ramps located in close
proximity to our recycling facilities. Containerized shipments are exported by marine vessels to customers globally and domestic
shipments are typically shipped by rail or by truck.
AMR sells used auto parts from its self-service retail stores. Once customers have pulled desirable parts from the vehicle, we
remove other valuable ferrous and nonferrous parts which are consolidated and shipped primarily to wholesale customers by truck.
The salvaged autobodies are crushed and shipped by truck to our metals recycling facilities where geographically feasible, or to
third-party recyclers, for shredding.
6 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Sources of Unprocessed Metal
The most common forms of purchased unprocessed metal are obsolete machinery and equipment, such as automobiles, railroad
cars, railroad tracks, home appliances and other consumer goods, waste metal from manufacturing operations and demolition
metal from buildings and other infrastructure. Unprocessed metal is acquired from a diverse base of suppliers who unload at our
facilities, from drop boxes at suppliers’ industrial sites, and through negotiated purchases from other large suppliers, including
railroads, manufacturers, automobile salvage facilities, metal dealers, various government entities and individuals. We typically
seek to locate our retail auto parts stores in major population centers with convenient road access. Our auto parts store network
spans 15 states in the U.S. and two provinces in Western Canada, with a majority of the stores concentrated in regions where our
large shredders are located. Through our network of auto parts stores, we seek to obtain salvaged vehicles from five primary
sources: private parties, tow companies, charities, auto auctions and municipal and other contracts. AMR has a program to purchase
vehicles from private parties called “Cash for Junk Cars” which is advertised in local markets. Private parties either call a toll-
free number and receive a quote for their vehicle or obtain an instant online quote. The private party can either deliver the vehicle
to one of our retail locations or arrange for the vehicle to be picked up. AMR also employs car buyers who travel to vendors and
bid on vehicles.
The majority of AMR’s scrap metal collection and processing facilities receive unprocessed metal via major railroad routes,
waterways or highways. Metals recycling facilities situated near industrial manufacturing and major transportation routes have
the competitive advantage of reduced freight costs because of the significant cost of freight relative to the cost of metal. The
locations of AMR’s West Coast facilities provide access to sources of unprocessed metal in the Northern California region,
northward to Western Canada and Alaska, and to the East, including Idaho, Montana, Utah, Colorado and Nevada. The locations
of the East Coast facilities provide access to sources of unprocessed metal in New York, Connecticut, Maine, Massachusetts, New
Hampshire, Rhode Island, Vermont, Eastern Canada and, from time to time, the Midwest. In the Southeastern U.S., approximately
half of AMR’s ferrous and nonferrous unprocessed metal volume is purchased from industrial companies, including auto
manufacturers, with the remaining volume being purchased from smaller dealers and individuals. These industrial companies
provide AMR with metals that are by-products of their manufacturing processes.
The supply of scrap metal from these various sources can fluctuate with the level of economic activity in the U.S. and can be
sensitive to variability in scrap metal prices, particularly in the short term. The supply of scrap metal can also fluctuate, to a lesser
degree, due to seasonal factors, such as severe weather conditions, which can inhibit scrap metal collections at our facilities and
production levels in our yards. Severe weather conditions can also adversely impact the timing of shipments of our products, the
level of manufacturing activity utilizing our products, and retail admissions at our auto parts stores.
Backlog
As of September 30, 2017, AMR had a backlog of orders to sell $96 million of export ferrous metal compared to $55 million at
the same time in the prior year primarily due to increased selling prices and the timing of sales. Additionally, as of September 30,
2017, AMR had a backlog of orders to sell $34 million of export nonferrous metal compared to $27 million in the prior year
primarily due to increased selling prices. We expect to fill the entirety of the backlog of orders for export ferrous and nonferrous
metal during fiscal 2018.
Competition
AMR competes in the U.S. and in Western Canada for the purchase of scrap metal with large, well-financed recyclers of scrap
metal, steel mills that own scrap yards, and with smaller metal facilities and dealers. AMR's auto stores compete for the purchase
of end-of-life vehicles with other auto dismantlers, used car dealers, auto auctions and metal recyclers. In general, the competitive
factors impacting the purchase of scrap metal are the price offered by the purchaser and the proximity of the purchaser to the
source of scrap metal and end-of-life vehicles. AMR also competes with brokers that buy scrap metal on behalf of domestic and
foreign steel mills.
AMR competes globally for the sale of processed recycled metal to finished steel and other metal product producers. The
predominant competitive factors that impact recycled metal sales are price (including shipping cost), reliability of service, product
quality, the relative value of the U.S. dollar and the availability and price of raw material alternatives, including scrap metal
substitutes such as pig iron and direct-reduced iron (both derived from iron ore), and semi-finished products, such as steel billets.
Commencing in fiscal 2012 and spanning through the first half of fiscal 2016, low-priced steel billets using iron ore as their primary
raw material contributed to lower scrap metal demand and prices. These challenging market conditions led to an industry trend
of reductions in capacity through idling of equipment and curtailment of operations, including by large and well-capitalized
companies, while a number of smaller competitors consolidated or exited the scrap market due to the protracted cyclical downturn.
In fiscal 2015, we idled a large-scale shredder in Johnston, Rhode Island and another in Surrey, British Columbia, and in fiscal
2016, we idled a small shredder in Concord, New Hampshire to more closely align our business with the prevalent market conditions.
Market conditions improved in fiscal 2017 mainly due to higher demand from steel manufacturers in the domestic and export
markets resulting in higher selling prices for raw materials used in steel production and increased supply flows of scrap metal,
7 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
including end-of-life vehicles. Higher average selling prices and supply volumes, in combination with increased sales diversification
and the benefits to our operating efficiency from our multi-year cost savings and productivity initiatives, led to significant
improvements in our operating performance year over year.
AMR also competes for the sale of used auto parts to retail customers with other self-service and full-service auto dismantlers.
The auto parts industry is characterized by diverse and fragmented competition and comprises a large number of aftermarket and
used auto parts suppliers of all sizes, ranging from large, multinational corporations which serve both original equipment
manufacturers and the aftermarket on a worldwide basis to small, local entities which have more limited supply. The main
competitive factors impacting the retail sale of auto parts are price, availability of product, quality and convenience of the retail
stores to customers.
AMR's ability to process substantial volumes of scrap metal products, advanced processing equipment, number of locations, access
to a variety of different modes of transportation, geographic dispersion and the operating synergies of its integrated platform
provide its business with the ability to compete successfully in varying market conditions.
CSS
Business
CSS operates a steel mini-mill in McMinnville, Oregon that produces a range of finished steel long products such as reinforcing
bar (rebar) and wire rod. The primary feedstock for the manufacture of its products is recycled scrap metal. CSS's steel mill obtains
substantially all of its scrap metal raw material requirements from its integrated metals recycling and joint venture operations.
CSS's metals recycling operations are comprised of a collection, shredding and export operation in Portland, Oregon, four feeder
yard operations located in Oregon and Southern Washington, and one metals recycling joint venture ownership interest.
Additionally, CSS purchases small volumes of ferrous scrap metal from AMR and sells ferrous and nonferrous recycled scrap
metal into the export market. CSS's revenues from external sales of recycled scrap metal account for less than 10% of SSI's
consolidated revenues in all of the periods presented.
Manufacturing
CSS’s melt shop includes an EAF, a ladle refining furnace with enhanced steel chemistry refining capabilities, and a five-strand
continuous billet caster, permitting the mill to produce special alloy grades of steel not currently produced by other mills on the
West Coast of the U.S. The melt shop produced 489 thousand, 499 thousand and 600 thousand short tons of steel in the form of
billets during fiscal 2017, 2016 and 2015, respectively. The substantial majority of these billets are used by CSS in its rolling mill
to produce finished steel products.
Through the end of fiscal 2016, CSS operated two computerized rolling mills. In the first quarter of fiscal 2017, we implemented
a plan to shut down and decommission the older rolling mill, which was entered into service over 40 years ago, and which in
recent years had been producing only a small proportion of CSS's finished steel products. This action, in conjunction with an
initiative to enhance the operating efficiency of the newer and more technologically advanced rolling mill, is expected to improve
product quality, while expanding its overall effective annual production capacity. The newer rolling mill has an effective annual
production capacity of 580 thousand tons of finished steel products.
Billets produced in CSS’s melt shop are reheated in a natural gas-fueled furnace and are then hot-rolled through the rolling mill
to produce finished products. CSS continues to monitor the market for new products and, through discussions with customers, to
identify additional opportunities to expand its product lines and sales.
CSS has an operating permit issued under Title V of the Clean Air Act Amendments of 1990, which governs certain air quality
standards. The permit is based upon an annual production capacity of 950 thousand tons. The permit was first issued in 1998 and
has since been renewed through February 1, 2018. The permit renewal process occurs every five years and is underway for the
next renewal period.
Products
CSS produces semi-finished goods (billets) and finished goods, consisting of rebar, coiled rebar, wire rod, merchant bar and other
specialty products. Semi-finished goods are predominantly used for CSS’s finished products, but also have been produced for sale
to other steel mills. Rebar is produced in either straight length steel bars or coils and used to increase the strength of poured
concrete. Coiled rebar is preferred by some manufacturers because it reduces the waste generated by cutting individual lengths to
meet customer specifications and, therefore, improves yield. Wire rod is steel rod, delivered in coiled form, used by manufacturers
to produce a variety of products such as chain link fencing, nails, wire, stucco netting, and pre-stressed concrete strand. Merchant
bar consists of rounds and square steel bars used by manufacturers to produce a wide variety of products, including bolts, threaded
bars, and dowel bars. CSS is also certified to produce high-quality rebar to support nuclear power plant construction and has a
license to produce certain patented high-strength specialty steels.
8 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
The table below sets forth, on a revenue and volume basis, the sales of finished steel products during the last three fiscal years
ended August 31:
Finished steel products
2017
2016
2015
Revenues(1)
280,206
$
Volume(2)
495,516
Revenues(1)
269,355
$
Volume(2)
488,212
Revenues(1)
363,795
$
Volume(2)
539,984
_____________________________
(1) Revenues stated in thousands of dollars.
(2) Volume stated in short tons (one short ton = 2,000 pounds).
The metals recycling operations within CSS produce substantially the same recycled scrap metal products as those produced by
the metals recycling operations within AMR and are exposed to similar market and competitive forces.
Customers
CSS’s finished steel customers are primarily steel service centers, construction industry subcontractors, steel fabricators, wire
drawers and major farm and wood products suppliers. During fiscal 2017, CSS sold its finished steel products to customers located
primarily in the Western U.S. and Western Canada. Customers in California accounted for 53%, 48%, and 46% of CSS's steel
revenues in fiscal 2017, 2016 and 2015, respectively. CSS’s ten largest steel customers accounted for 51%, 45% and 42% of its
steel revenues during fiscal 2017, 2016 and 2015, respectively. No CSS steel customer accounted for 10% or more of consolidated
revenues in fiscal 2017, 2016 and 2015.
The metals recycling operations within CSS also sell ferrous and nonferrous recycled metal products, primarily to steel mills,
foundries and smelters in Asia.
Distribution
CSS sells finished steel products directly from its mini-mill in McMinnville, Oregon and its owned distribution center in City of
Industry, California (Los Angeles area). Finished steel products are shipped from the mini-mill to the distribution center primarily
by rail. The distribution center facilitates sales by maintaining an inventory of products close to major customers for just-in-time
delivery. CSS communicates regularly with major customers to determine their anticipated needs and plans its rolling mill
production schedule accordingly. Finished steel shipments to customers are made by common carrier, primarily truck or rail.
CSS delivers recycled ferrous scrap metal to export customers by bulk ship using its deep water terminal facility in Portland,
Oregon, and nonferrous recycled scrap metal to export customers in containers by ship.
Supply of Scrap Metal
We believe CSS operates the only mini-mill in the Western U.S. that obtains its scrap metal requirements from an integrated metals
recycler. CSS's metals recycling operations provide its steel mill with a mix of recycled metal grades, which allows the mill to
achieve optimum efficiency in its melting operations.
Energy Supply
CSS needs electricity to run its steel manufacturing operations, primarily its EAF. CSS purchases electricity under a long-term
contract with McMinnville Water & Light (“MW&L”), which in turn relies on the Bonneville Power Administration (“BPA”). We
entered into our current contract with MW&L in October 2011 that will expire in September 2028.
CSS's steel manufacturing operations also need natural gas to run its reheat furnace, which is used to reheat billets prior to running
them through the rolling mill. CSS meets this demand through a natural gas agreement with a utility provider that obligates CSS
at each month-end to purchase a volume of gas based on its projected needs for the immediately subsequent month on a take-or-
pay basis priced using published natural gas indices.
Energy costs represented 5% of CSS’s cost of goods sold in fiscal 2017 and 6% in each of fiscal 2016 and 2015.
Backlog
CSS's steel manufacturing operations generally ship products within days after the receipt of a purchase order. As of September 30,
2017 and 2016, CSS had a backlog of finished steel orders of $19 million and $5 million, respectively.
9 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Competition
The primary domestic competitors of CSS for the sale of finished steel products include Nucor Corporation’s manufacturing
facilities in Arizona, Utah and Washington; Gerdau Long Steel North America’s facility in California; and Commercial Metals
Company’s manufacturing facility in Arizona. In addition to domestic competition, CSS competes with foreign steel producers,
principally located in Asia, Canada, Mexico and Central and South America, primarily in shorter length rebar and certain wire rod
grades. In recent years, a trend of increasing volumes of imported steel products has occurred in CSS's primary domestic markets,
driven by global overcapacity in steel-making production and by the relative strength of the U.S. dollar which increases the
competitiveness of imports. The principal competitive factors in CSS’s market are price, quality, service, product availability and
the relative value of the U.S. dollar.
Large volumes of low-priced imports have negatively impacted, and have the potential to continue to negatively impact, the ability
of CSS to compete. For more than a decade, CSS's steel manufacturing operations, as part of a U.S. industry coalition, has petitioned
the U.S. Government under our international trade laws for relief in the form of antidumping and countervailing duties against
wire rod and rebar products from a number of foreign countries. Many of those cases have been successful and as of the start of
fiscal 2017, antidumping duty orders were in effect related to imports of rebar from Belarus, China, Indonesia, Latvia, Mexico,
Moldova, Poland and Ukraine; a countervailing duty order was in effect related to imports of rebar from Turkey; antidumping
duty orders were in effect related to imports of wire rod from Brazil, China, Indonesia, Mexico, Moldova and Trinidad and Tobago;
and a countervailing duty order was in effect related to imports of wire rod from Brazil. During 2017, following a petition by the
U.S. domestic industry and successful resolution, new antidumping duty orders were imposed against rebar from Japan, Taiwan
and Turkey.
The duties imposed as part of these orders are periodically reassessed through the administrative review process. In addition, every
five years the U.S. government conducts sunset reviews to determine whether revocation of the orders would likely lead to
resumption of dumping and subsidization and negatively impact the U.S. domestic industry. Affirmative decisions allow the orders
to continue for an additional five years. The next sunset reviews for rebar from Belarus, China, Indonesia, Latvia, Moldova, Poland
and Ukraine will be in 2018, and for Mexico and Turkey (from the 2014 investigation) will be in 2019. The administrative reviews
for rebar from the newest order covering imports from Japan, Taiwan and Turkey will be in 2022. The next sunset reviews for
wire rod from all countries will be in 2019.
During fiscal 2017, the antidumping margin on one large Mexican wire rod manufacturer was increased significantly in the
administrative review process.
In May 2017, following successful resolution of a petition from the Canadian domestic industry, the Canada Border Services
Agency issued antidumping duty orders covering rebar from Belarus, Chinese Taipei, Hong Kong, Japan, Portugal and Spain.
Along with the current orders against rebar from China, Korea and Turkey, these orders are expected to generally lead to a reduction
in the volume of imports into Canada from these countries.
In March 2017, the U.S. domestic steel manufacturing industry filed a new petition targeting wire rod from Belarus, Italy, Korea,
Russia, South Africa, Spain, Turkey, Ukraine, the United Arab Emirates and the United Kingdom. The petition alleges dumping
of wire rod from all countries, and additional unfair subsidization of wire rod from Italy and Turkey. The U.S. International Trade
Commission made an affirmative preliminary injury determination in May and the case is currently with the Department of
Commerce for determination of dumping and subsidization margins.
The long-term effectiveness of existing antidumping and countervailing duty orders related to imports of wire rod and rebar
products is largely uncertain and is impacted by the U.S. Government's ability to efficiently identify and respond to violations of
U.S. international trade laws affecting CSS's steel manufacturing operations.
In addition to antidumping and countervailing duty activity, in April 2017, the U.S. Department of Commerce self-initiated a
national security investigation under Section 232(B) of the Trade Expansion Act of 1962. The purpose of this law is to provide an
exemption from normal international trade rules if imports of a product, or products, are harming national security. The Secretary
of Commerce has 270 days (or until January 2018) to present the U.S. President with a report and recommendations. If remedies
are imposed on steel imports (such as additional tariffs, quotas or a combination of the two), this could result in a decrease in
imports and higher prices for those imports which are sold into the U.S.
10 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Strategic Focus
Use of our Operating Platform to Meet Both Domestic and Global Demand
Our operating platform includes a wide-ranging network of locations that allows us to diversify our sales by directly accessing
customers domestically and around the world to meet demand for recycled metal wherever it is greatest. Our seven deep water
terminal facilities enable us to bulk load large vessels capable of trans-oceanic shipments, thereby allowing us to efficiently ship
products globally. We achieve cost efficiencies because we own the majority of these terminal facilities, which reduces the likelihood
of berthing delays often experienced by users of unaffiliated terminals, and because we are able to ship bulk cargoes of up to
50,000 tons, which generally have lower freight costs on a per-ton basis than containerized shipments that hold 20 to 30 tons per
container. We also use an internal and third-party logistics network to transport both ferrous and nonferrous metals by truck, rail
and barge to efficiently meet regional domestic demand in our North American market.
Integrated Operations Maximize Opportunities for Synergies, Cost Efficiencies and Volumes
We have historically focused on, and will continue to emphasize, continuous improvement programs, including productivity
initiatives and technology investments which seek to maximize ferrous and nonferrous scrap metal recovery and to improve
productivity in our steel manufacturing operations. The objective of these programs is to identify areas in existing processes that
could be made more efficient, or where current performance could be improved, and to recommend and implement solutions that
could increase revenues or reduce costs by increasing output, recovery and productivity.
In recent years, we undertook a number of productivity improvements and restructuring initiatives designed to reduce operating
expenses and improve profitability, including further integration among our operating platforms. In fiscal 2012, we implemented
restructuring initiatives which achieved a reduction in annual pre-tax operating costs of $25 million and were completed by the
end of fiscal 2013. In fiscal 2014, we implemented productivity improvement and restructuring initiatives which achieved a
reduction in annual pre-tax operating costs of $40 million and were completed by the end of fiscal 2015. In fiscal 2015, we initiated
and implemented restructuring initiatives including idling underutilized metals recycling assets and closing seven auto parts stores
to more closely align our business to the prevalent market conditions. We also implemented measures focused on further reducing
our annual operating expenses through headcount reductions, reducing organizational layers, consolidating shared services
functions and other non-headcount measures. Additional cost savings and productivity improvement initiatives, including
additional reductions in personnel, savings from procurement activities, streamlining of administrative and supporting services
functions, and adjustments to our operating capacity through additional facility closures, were identified and initiated in fiscal
2016 as an expansion of the fiscal 2015 restructuring initiatives. Together, these fiscal 2015 and 2016 initiatives targeted an
improvement in annual pre-tax operating results of approximately $95 million. In fiscal 2017, we achieved the approximately $95
million in combined benefits related to these measures, compared to $78 million and $28 million of benefits in fiscal 2016 and
2015, respectively. In total, we have achieved approximately $160 million in combined annual benefits to operating performance
since announcing the initial phase of these cost savings and productivity initiatives at the end of fiscal 2012. See Note 8 -
Discontinued Operations and Note 10 - Restructuring Charges and Other Exit-Related Activities in the Notes to the Consolidated
Financial Statements in Part II, Item 8 of this report for further details.
In the fourth quarter of fiscal 2015, we combined our auto parts and metals recycling businesses into a single operating platform,
AMR, to further optimize the efficiencies within the platform, enable additional synergies to be captured throughout our supply
chain and global sales channel, and more effectively leverage our shared services functions. In the fourth quarter of fiscal 2017,
we combined our steel manufacturing operations with our Oregon metals recycling operations, forming CSS, which is intended
to enhance our flexibility, generate internal synergies, and enable us to more effectively adjust to market changes across our
recycling and steel manufacturing operations. Through our integrated platforms, we seek to generate operational efficiencies
through the use of regionally-based supply networks, automation, enhanced logistics, and national commercial market activities.
During fiscal 2017, 2016 and 2015, we spent $45 million, $35 million and $32 million, respectively, on capital improvements.
These capital expenditures primarily reflect our significant investments in modern equipment to improve the efficiency and
capabilities of our businesses in order to further maximize our economies of scale and to comply with environmental regulations.
Our capital expenditures in fiscal 2017 included costs to upgrade our equipment and infrastructure and expand on our investments
in environmental and safety-related assets. We currently plan to invest in the range of $55 to $70 million in capital expenditures
on similar projects in fiscal 2018, including approximately $20 million on environmental projects.
11 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Environmental Matters
Impact of Legislation and Regulation
Compliance with environmental laws and regulations is a significant factor in our operations. Our businesses are subject to extensive
local, state and federal environmental protection, health, safety and transportation laws and regulations relating to, among others:
•
•
•
•
•
•
•
•
The U.S. Environmental Protection Agency (“EPA”);
Remediation under the Comprehensive Environmental Response, Compensation and Liability Act
(“CERCLA”);
The discharge of materials and emissions into the air;
The prevention and remediation of soil and groundwater contamination;
The management and treatment of wastewater and storm water;
Global climate change;
The treatment, handling and/or disposal of solid waste and hazardous waste; and
The protection of our employees’ health and safety.
These environmental laws regulate, among other things, the release and discharge of hazardous materials into the air, water and
ground; exposure to hazardous materials; and the identification, storage, treatment, handling and disposal of hazardous materials.
Environmental legislation and regulations have changed rapidly in recent years, and it is likely that we will be subject to even
more stringent environmental standards in the future.
Concern over climate change, including the impact of global warming, has led to significant U.S. and international regulatory and
legislative initiatives to limit greenhouse gas (“GHG”) emissions. In 2007, the U.S. Supreme Court ruled that the EPA was authorized
to regulate carbon dioxide under the U.S. Clean Air Act. As a consequence, the EPA initiated a series of regulatory efforts aimed
at addressing greenhouse gases as pollutants, including finding that GHG emissions endanger public health, implementing
mandatory GHG emission reporting requirements, setting carbon emission standards for light-duty vehicles and taking other steps
to address GHG emissions. Legislation has also been proposed in the U.S. Congress to address GHG emissions and global climate
change, including “cap and trade” programs, and some form of federal climate change legislation or additional federal regulation
is possible. In addition, we are required to annually report GHG emissions from our steel mill to the State of Oregon Department
of Environmental Quality and the EPA. A number of other states, including states in which we have operations and facilities, have
considered, are considering or have already enacted legislation to develop information or address climate change and GHG
emissions, as well.
Although our objective is to maintain compliance with applicable environmental laws and regulations, we have, in the past, been
found to be not in compliance with certain environmental laws and regulations and have incurred liabilities, expenditures, fines
and penalties associated with such violations. In December 2000, we were notified by the EPA that we are one of the potentially
responsible parties that owns or operates, or formerly owned or operated, sites which are part of or adjacent to the Portland Harbor
Superfund site (see discussion in Risk Factors in Part I, Item 1A and Note 9 – Commitments and Contingencies in the Notes to
the Consolidated Financial Statements in Part II, Item 8 of this report). In fiscal 2017, capital expenditures related to environmental
projects were $17 million, and we expect to spend up to $20 million on capital expenditures related to environmental projects in
fiscal 2018.
Indirect Consequences of Future Legislation and Regulation
Future legislation or increased regulation regarding climate change and GHG emissions could impose significant costs on our
business and our customers and suppliers, including increased energy, capital equipment, environmental monitoring and reporting
and other costs in order to comply with laws and regulations concerning climate change and GHG emissions. The potential costs
of allowances, taxes, fees, offsets or credits that may be part of “cap and trade” programs or similar future legislative or regulatory
measures are still uncertain. Any adopted future climate change and GHG laws or regulations could negatively impact our ability
(and that of our customers and suppliers) to compete with companies situated in areas not subject to such limitations. Furthermore,
even without such laws or regulations, increased awareness and any adverse publicity in the global marketplace about the GHGs
emitted by companies in the metals recycling and steel manufacturing industries could harm our reputation and reduce customer
demand for our products.
GHG legislation and regulation is also expected to have an effect on the price of electricity, especially when generated using
carbon-based fuels. Since the electricity supply for CSS includes a significant element of hydro-generated production, CSS’s
energy costs are less likely to be impacted than those of competitors using electricity generated by carbon-based fuels. In addition,
demand for scrap metal may increase as a result of mills with blast furnaces seeking to maximize the scrap metal component of
raw material infeed, as melting scrap metal involves less energy than is required for melting iron ore.
12 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Since the use of recycled iron and steel instead of iron ore to make new steel results in savings in the consumption of energy, virgin
materials and water and reduces mining wastes, we believe our recycled metal products position us to be more competitive in the
future for business from companies wishing to reduce their carbon footprint and impact on the environment. In addition, our EAF
generates significantly less GHG emissions than traditional blast furnaces.
Physical Impacts of Climate Change on Our Costs and Operations
There has been public discussion that climate change may be associated with rising sea levels as well as extreme weather conditions
such as more intense hurricanes, thunderstorms, tornadoes and snow or ice storms. Extreme weather conditions may increase our
costs or cause damage to our facilities, and any damage resulting from extreme weather may not be fully insured. As many of our
recycling facilities are located near deep water ports, significantly rising sea levels may disrupt our ability to receive scrap metal,
process the scrap metal through our mega-shredders and ship product to our customers. Periods of extended adverse weather
conditions may inhibit the supply of scrap metal to AMR and CSS. In addition, sustained periods of increased temperature levels
in the summer in areas where our retail auto parts operations are located could result in less customer traffic, thus resulting in
reduced admissions and parts sales.
Employees
As of September 30, 2017, we had 3,183 full-time employees, consisting of 2,464 employees at AMR, 546 employees at CSS and
173 corporate administrative and shared services employees. Of these employees, 665 were covered by collective bargaining
agreements. The Cascade Steel Rolling Mills contract with the United Steelworkers of America, which covers 289 of these
employees, was renewed and ratified in April 2016 and will expire on March 31, 2019. We believe that in general our labor relations
are good.
Available Information
Our internet address is www.schnitzersteel.com. The content of our website is not incorporated by reference into this Annual
Report on Form 10-K. We make available on our website, free of charge, under the caption “Investors – SEC Filings” our annual
reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports, as
soon as reasonably practicable after electronically filing with or furnishing such materials to the Securities and Exchange
Commission (“SEC”) pursuant to Sections 13(a) or 15(d) of the Securities Exchange Act of 1934.
We may use our website as a channel of distribution of material Company information. Financial and other material information
regarding our Company is routinely posted on and accessible at http://www.schnitzersteel.com/investors.aspx. In addition, you
may automatically receive e-mail alerts and other information about our Company by visiting the “E-mail Alerts” section at http://
www.schnitzersteel.com/investors.aspx and registering your email address.
ITEM 1A. RISK FACTORS
Described below are risks, which are categorized as “Risk Factors Relating to Our Business,” “Risk Factors Relating to the
Regulatory Environment” and “Risk Factors Relating to Our Employees,” that could have a material adverse effect on our results
of operations, financial condition and cash flows or could cause actual results to differ materially from the results contemplated
by the forward-looking statements contained in this Annual Report. See “Forward-Looking Statements” that precedes Part I of
this report. Additional risks and uncertainties that we are unaware of or that we currently deem immaterial may in the future have
a material adverse effect on our results of operations, financial condition and cash flows.
Risk Factors Relating to Our Business
Potential costs related to the environmental cleanup of Portland Harbor may be material to our financial position and liquidity
In December 2000, we were notified by the EPA under CERCLA that we are one of the potentially responsible parties (“PRPs”)
that owns or operates or formerly owned or operated sites which are part of or adjacent to the Portland Harbor Superfund site (the
“Site”). The precise nature and extent of any cleanup of the Site, the parties to be involved, the timing of any specific remedial
action and the allocation of the costs for any cleanup among responsible parties have not yet been determined. The process of site
investigation, remedy selection, identification of additional PRPs and allocation of costs has been underway for a number of years,
but significant uncertainties remain. It is unclear to what extent we will be liable for environmental costs or natural resource
damage claims or third party contribution or damage claims with respect to the Site.
While we participated in certain preliminary Site study efforts, we were not party to the consent order entered into by the EPA
with certain other PRPs, referred to as the “Lower Willamette Group” (“LWG”), for a remedial investigation/feasibility study
(“RI/FS”). During fiscal 2007, we and certain other parties agreed to an interim settlement with the LWG under which we made
a cash contribution to the LWG RI/FS. The LWG has indicated that it had incurred over $115 million in investigation-related costs
over an approximately ten year period working on the RI/FS. Following submittal of draft RI and FS documents which the EPA
largely rejected, the EPA took over the RI/FS process.
13 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
We have joined with approximately 100 other PRPs, including the LWG members, in a voluntary process to establish an allocation
of costs at the Site, including the costs incurred by the LWG in the RI/FS process. The LWG members have also commenced
federal court litigation, which has been stayed, seeking to bring additional parties into the allocation process.
In January 2008, the Natural Resource Damages Trustee Council (“Trustees”) for Portland Harbor invited us and other PRPs to
participate in funding and implementing the Natural Resource Injury Assessment for the Site. Following meetings among the
Trustees and the PRPs, a funding and participation agreement was negotiated under which the participating PRPs agreed to fund
the first phase of the natural resource damage assessment. We joined in that Phase I agreement and paid a portion of those costs.
We did not participate in funding the second phase of the natural resource damage assessment.
A former Trustee, the Confederated Tribes and Bands of the Yakama Nation, which withdrew from the council in 2009, filed a
suit on January 30, 2017 against approximately 30 parties, including us, seeking reimbursement of certain past and future response
costs in connection with remedial action at the Site and recovery of assessment costs related to natural resources damages from
releases at and from the Site to the Multnomah Channel and the Lower Columbia River. We intend to defend against such claims
and do not have sufficient information to determine the likelihood of a loss in this matter or to estimate the amount of damages
being sought or the amount of such damages that could be allocated to us.
Estimates of the cost of remedial action for the cleanup of the in-river portion of the Site in various drafts of the FS and in the
EPA’s final FS issued in June 2016 have varied widely, from approximately $170 million to over $2.5 billion (net present value),
depending on the remedy alternative and a number of other factors. In addition, we and certain other stakeholders have identified
a number of serious concerns regarding the EPA's risk and remedial alternatives assessments and the EPA's cost estimates,
scheduling assumptions and conclusions regarding the feasibility, effectiveness and assignment of remediation technologies,
including that the EPA’s FS was based on data that are more than a decade old and may not accurately represent site or background
conditions.
In January 2017, the EPA issued a Record of Decision (“ROD”) that identified the selected remedy for the Site. The selected
remedy is a modified version of one of the alternative remedies in the EPA’s FS that expands the scope of the cleanup and has an
estimated cost which is significantly more than the Proposed Plan identified by the EPA in the final FS. The EPA has estimated
the total cost of the selected remedy at $1.7 billion with a net present value cost of $1.05 billion (at a 7% discount rate) and an
estimated construction period of 13 years following completion of the remedial designs. In the ROD, the EPA stated that the cost
estimate is an order-of-magnitude engineering estimate that is expected to be within +50% to -30% of the actual project cost and
that changes in the cost elements are likely to occur as a result of new information and data collected during the engineering design.
We have identified a number of concerns regarding the EPA's estimated cost and time required for the selected remedy. Because
of questions regarding cost-effectiveness and other concerns, such as technical feasibility, use of stale data and the need for new
baseline data, it is uncertain whether the ROD will be implemented as issued. In addition, the ROD does not determine or allocate
the responsibility for remediation costs.
In the ROD, the EPA acknowledged that the assumptions used to estimate costs for the selected remedy were developed based on
the existing data and will be finalized during the remedial design, after design level data to refine the baseline conditions are
obtained. Moreover, the ROD provides only Site-wide cost estimates and does not provide sufficient detail or ranges of certainty
and finality to estimate costs for specific sediment management areas. Accordingly, the EPA has indicated and we anticipate that
additional pre-remedial design investigative work, such as new baseline sampling and monitoring, will be conducted in order to
provide a re-baseline and delineate particular remedial actions for specific areas within the Site. This re-baselining will need to
occur prior to proceeding with the next phase in the process which is the remedial design. The remedial design phase is an
engineering phase during which additional technical information and data will be collected, identified and incorporated into
technical drawings and specifications developed for the subsequent remedial action. The EPA is seeking a new coalition of PRPs
to perform the re-baselining and remedial design activities. We are considering whether to become a party to a new Administrative
Order on Consent to perform such pre-remedial design investigative activities, if an acceptable consent order can be finalized. We
do not believe that our share of the costs of performing such work would be material, and we believe that such costs would be
allocable and that they would be reimbursable under the insurance policies discussed below.
Remediation activities are not expected to commence for a number of years and responsibility for implementing and funding the
remedy will be determined in a separate allocation process. While an allocation process is currently underway as discussed above,
the EPA's ROD has raised questions and uncertainty as to when and how that allocation process will proceed. We would not expect
the allocation process to proceed until after additional pre-remedial design data is collected.
Because there has not been a determination of the specific remediation actions that will be required, the amount of natural resource
damages or how the costs of the investigations and any remedy and natural resource damages will be allocated among the PRPs,
we believe it is not possible to reasonably estimate the amount or range of costs which we are likely to or which it is reasonably
possible that we will incur in connection with the Site, although such costs could be material to our financial position, results of
14 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
operations, cash flows and liquidity. Among the facts currently being developed are detailed information on the history of ownership
of and the nature of the uses of and activities and operations performed on each property within the Site, which are factors that
will play a substantial role in determining the allocation of investigation and remedy costs among the PRPs. We have insurance
policies that we believe will provide reimbursement for costs we incur for defense, remediation and mitigation for natural resource
damages claims in connection with the Site, although there is no assurance that those policies will cover all of the costs which we
may incur. Significant cash outflows in the future related to the Site could reduce the amount of our borrowing capacity that could
otherwise be used for investment in capital expenditures, dividends, share repurchases and acquisitions. Any material liabilities
incurred in the future related to the Site could result in our failure to maintain compliance with certain covenants in our debt
agreements. See “Contingencies – Environmental” in Note 9 – Commitments and Contingencies in the Notes to the Consolidated
Financial Statements in Part II, Item 8 of this report.
We operate in industries that are cyclical and sensitive to general economic conditions, which could have a material adverse
effect on our operating results, financial condition and cash flows
Demand for most of our products is cyclical in nature and sensitive to general economic conditions. The timing and magnitude
of the cycles in the industries in which our products are used, including global steel manufacturing and residential construction
in the U.S., are difficult to predict. The cyclical nature of our operations tends to reflect and be amplified by changes in economic
conditions, both domestically and internationally, and foreign currency exchange fluctuations. The impact of recent political events,
such as the United Kingdom referendum to exit the European Union declared in June 2016, on global economic conditions is
currently uncertain. Economic downturns or a prolonged period of slow growth in the U.S. and foreign markets or any of the
industries in which we operate could have a material adverse effect on our results of operations, financial condition and cash flows.
Instability in international markets may adversely affect our business, financial position and results of operations
We generate a substantial portion of our revenues from sales to customers located outside the U.S. including countries in Asia,
the Mediterranean region and North, Central and South America. Our ability to sell our products profitably, or at all, to international
markets is subject to a number of risks including adverse impacts of political, military, terrorist or major pandemic events; local
labor and social issues; legal and regulatory requirements or limitations imposed by foreign governments including quotas, tariffs
or other protectionist trade barriers, adverse tax law changes, nationalization, currency restrictions, or import restrictions for certain
types of products we export; and disruptions or delays in shipments caused by customs compliance or government agencies.
For example, in fiscal 2017, regulators in China began implementing the National Sword initiative involving inspections of Chinese
industrial enterprises, including recyclers, in order to identify rules violations with respect to discharge of pollutants or illegally
transferred scrap imports. The scope of the National Sword initiative, which could include import bans on certain recycled products,
is still being developed. Based on the most current information available, we believe that a potential impact on our recycling
operations could include additional processing of certain nonferrous recycled scrap metal products prior to export to China. If
necessary to address additional regulatory developments, we may assess the potential for further investments in nonferrous
processing equipment where economically justified.
The occurrence of such events and conditions may adversely affect our business, financial position and results of operations.
Changes in the availability or price of raw materials and end-of-life vehicles could reduce our sales
Our businesses require certain materials that are sourced from third-party suppliers. Although the synergies from our integrated
operations allow us to be our own source for some raw materials, particularly with respect to scrap metal for our steel manufacturing
operations, we rely on other suppliers for most of our raw material needs, including inputs to steel production such as graphite
electrodes and other required consumables. Industry supply conditions generally involve risks, including the possibility of shortages
of raw materials, increases in raw material costs and reduced control over delivery schedules. We procure our scrap inventory
from numerous sources. These suppliers generally are not bound by long-term contracts and have no obligation to sell scrap metal
to us. In periods of declining or lower scrap metal prices, such as the declining price environment we experienced in fiscal 2015
and the first half of fiscal 2016, suppliers may elect to hold scrap metal to wait for higher prices or intentionally slow their metal
collection activities, tightening supply. If a substantial number of suppliers cease selling scrap metal to us, we will be unable to
recycle metal at desired levels, and our results of operations and financial condition could be materially adversely affected. A
slowdown of industrial production in the U.S. may also reduce the supply of industrial grades of metal to the metals recycling
industry, resulting in less recyclable metal available to process and market. Increased competition for domestic scrap metal,
including as a result of overcapacity in the scrap recycling industry in the U.S. and Canada, may also reduce the supply of scrap
metal available to us. Failure to obtain a steady supply of scrap material could both adversely impact our ability to meet sales
commitments and reduce our operating margins. Failure to obtain an adequate supply of end-of-life vehicles could adversely
impact our ability to attract customers and charge admission fees and reduce our parts sales. Failure to obtain raw materials and
other inputs to steel production such as alloys, graphite electrodes and other required consumables, could adversely impact our
ability to make steel to the specifications of our customers.
15 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Significant decreases in scrap metal prices may adversely impact our operating results
The timing and magnitude of the cycles in the industries in which we operate are difficult to predict and are influenced by different
economic conditions in the domestic market, where we typically acquire our raw materials, and foreign markets, where we typically
sell the majority of our products. Purchase prices for scrap metal including end-of-life vehicles and selling prices for recycled
scrap metal are subject to market forces beyond our control. For instance, in fiscal 2015 and the first half of fiscal 2016, scrap
metal prices experienced a significant downward trend caused primarily by the weak macroeconomic conditions and global steel-
making overcapacity, which was further exacerbated by the impact of lower iron ore prices, a raw material used in steel-making
in blast furnaces which compete with EAF steel-making production that uses ferrous scrap as its primary feedstock. While we
attempt to respond to changing recycled scrap metal selling prices through adjustments to our metal purchase prices, our ability
to do so is limited by competitive and other market factors. As a result, we may not be able to reduce our metal purchase prices
to fully offset a sharp reduction in recycled scrap metal sales prices, which may adversely impact our operating income and cash
flows. In fiscal 2015 and the first half of fiscal 2016, lower demand for recycled scrap metal relative to demand and competition
for supply of unprocessed scrap metal in the domestic market compressed operating margins due to selling prices decreasing at a
faster rate than purchase prices for unprocessed scrap metal. In addition, a rapid decrease in selling prices may compress our
operating margins due to the impact of average inventory cost accounting, which causes cost of goods sold recognized in the
Consolidated Statements of Operations to decrease at a slower rate than metal purchase prices and net selling prices.
Imbalances in supply and demand conditions in the global steel industry may reduce demand for our products
Economic expansions and contractions in global economies can result in supply and demand imbalances in the global steel industry
that can significantly affect the price of commodities used and sold by our business, as well as the price of and demand for finished
steel products. In a number of foreign countries, such as China, steel producers are generally government-owned and may therefore
make production decisions based on political or other factors that do not reflect free market conditions. In recent years, overcapacity
and excess steel production in these foreign countries resulted in the export of aggressively priced semi-finished and finished steel
products. This led to disruptions in steel-making operations within other countries, negatively impacting demand for our recycled
scrap metal products used by EAF mills globally as their primary feedstock. Further, the import of foreign steel products into the
U.S. at similarly aggressive prices adversely impacted finished steel sales prices and sales volumes at CSS. Existing trade laws
and regulations may be inadequate to prevent disadvantageous trade practices, which could have a material adverse effect on our
financial condition and results of operations. Although trade regulations restrict or impose duties on the importation of certain
products, if foreign steel production significantly exceeds consumption in those countries, global demand for our recycled scrap
metal products could decline and imports of steel products into the U.S. could increase, resulting in lower volumes and selling
prices for our recycled metal products and finished steel products.
Goodwill impairment charges may adversely affect our operating results
Goodwill represents the excess purchase price over the net amount of identifiable assets acquired and liabilities assumed in a
business combination measured at fair value. We have a substantial amount of goodwill on our balance sheet, all of which was
carried by a single reporting unit within AMR as of August 31, 2017. We test the goodwill balance for impairment on an annual
basis and when events occur or circumstances change that indicate that the fair value of the reporting unit may be below its carrying
amount. When testing goodwill for impairment, we may be required to measure the fair value of the reporting unit in order to
determine the amount of impairment, if any. Fair value determinations require considerable judgment and are sensitive to inherent
uncertainties and changes in estimates and assumptions regarding revenue growth rates, operating margins, capital expenditures,
working capital requirements, tax rates, terminal growth rates, discount rates, benefits associated with a taxable transaction and
synergistic benefits available to market participants. Declines in market conditions, a trend of weaker than anticipated financial
performance for our single reporting unit with allocated goodwill, a decline in our share price for a sustained period of time, or
an increase in the market-based weighted average cost of capital, among other factors, are indicators that the carrying value of
our goodwill may not be recoverable. We may be required to record a goodwill impairment charge that, if incurred, could have a
material adverse effect on our financial condition and results of operations. For example, in the second quarter of fiscal 2015,
management identified a triggering event requiring an interim impairment test of goodwill, which resulted in impairment of a
reporting unit's goodwill totaling $141 million, and in the second quarter of fiscal 2016, management identified a triggering event
requiring an interim impairment test of goodwill, which resulted in impairment of a different reporting unit's goodwill totaling $9
million. Both of these impairment charges are reported within the results of AMR in this report.
16 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Impairment of long-lived assets and cost and equity method investments may adversely affect our operating results
Our long-lived asset groups are subject to an impairment assessment when certain triggering events or circumstances indicate that
their carrying value may be impaired. If the carrying value exceeds our estimate of future undiscounted cash flows of the operations
related to the asset group, an impairment is recorded for the difference between the carrying amount and the fair value of the asset
group. The results of these tests for potential impairment may be adversely affected by unfavorable market conditions, our financial
performance trends, or an increase in interest rates, among other factors. If as a result of the impairment test we determine that
the fair value of any of our long-lived asset groups is less than its carrying amount, we may incur an impairment charge that could
have a material adverse effect on our financial condition and results of operations. We recorded impairment charges on long-lived
tangible and intangible assets associated with certain regional metals recycling operations and used auto parts store locations in
the amount of $8 million and $44 million during fiscal 2016 and 2015, respectively. With respect to our investments in
unconsolidated entities accounted for under the cost and equity methods, a loss in value of an investment that is other than a
temporary decline is recognized. Once we determine that an other-than-temporary impairment exists, we may incur an impairment
charge that could have a material adverse effect on our results of operations. We recorded impairment charges of $1 million and
$2 million during fiscal 2017 and 2016, respectively, related to investments in joint ventures accounted for under the equity method.
See Note 2 - Summary of Significant Accounting Policies in the Notes to the Consolidated Financial Statements in Part II, Item 8
of this report for further detail on long-lived asset and joint venture investment impairment charges.
Inability to sustain the benefits from productivity and restructuring initiatives may adversely impact our operating results
We have undertaken a number of productivity improvement and restructuring initiatives designed to reduce operating expenses
and improve profitability and to achieve further integration and synergistic cost efficiencies in our operating platform. These
initiatives included idling underutilized assets and closing facilities to more closely align our business to market conditions,
implementing productivity initiatives to increase production efficiency and material recovery, and further reducing our annual
operating expenses through headcount reductions, reducing organizational layers, consolidating shared service functions, savings
from procurement activities, streamlining of administrative and supporting services functions, and other non-headcount measures.
We incurred restructuring charges and other exit-related activities in fiscal 2017, 2016 and 2015 as a result of these initiatives.
Failure to sustain the expected cost reductions and other benefits related to these productivity and restructuring initiatives could
have a material adverse effect on our results of operations and cash flows.
Acquisitions and integration of acquired businesses may result in operating difficulties and other unintended consequences
We may make acquisitions of complementary businesses to enable us to enhance our customer base and grow our revenues.
Execution of any past or potential future acquisition involves a number of risks, including:
•
•
•
•
•
•
•
Difficulty integrating the acquired businesses’ personnel and operations;
Potential loss of key employees or customers of the acquired business;
Difficulties in realizing anticipated cost savings, efficiencies and synergies;
Unexpected costs;
Inaccurate assessment of or undisclosed liabilities;
Inability to maintain uniform standards, controls and procedures; and
Difficulty in managing growth.
If we do not successfully execute on acquisitions and the acquired businesses do not perform as projected, our financial condition
and results of operations could be materially adversely affected.
Changing economic conditions may result in customers not fulfilling their contractual obligations
We enter into export ferrous sales contracts preceded by negotiations that include fixing price, quantity, shipping terms and other
contractual terms. Upon finalization of these terms and satisfactory completion of other contractual contingencies, the customer
typically opens a letter of credit to satisfy its payment obligation under the contract prior to our shipment of the cargo. Although
not considered normal course of business, in times of changing economic conditions, including during periods of sharply falling
scrap metal prices such as those experienced in fiscal 2015 and the first half of fiscal 2016, there is an increased risk that customers
may not be willing or able to fulfill their contractual obligations or open letters of credit. For example, in fiscal 2015, the resale
or modification of the terms, each at significantly lower prices, of certain previously contracted bulk shipments had a $7 million
negative impact on our operating results. As of August 31, 2017 and 2016, 33% and 34%, respectively, of our trade accounts
receivable balance were covered by letters of credit.
17 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Increases in the value of the U.S. dollar relative to other currencies may reduce the demand for our products
A significant portion of our recycled scrap metal revenues is generated from sales to foreign customers, which are denominated
in U.S. dollars, including customers located in Asia, Africa and Europe. A strengthening U.S. dollar, as experienced during fiscal
2015 and fiscal 2016, makes our products more expensive for non-U.S. customers, which may negatively impact export sales. A
strengthening U.S. dollar also makes imported metal products less expensive, which may result in an increase in imports of steel
products into the U.S. As a result, our finished steel products, which are made in the U.S., may become more expensive for our
U.S. customers relative to imported steel products thereby reducing demand for our products.
We are exposed to translation and transaction risks associated with fluctuations in foreign currency exchange rates
Hedging instruments may not be effective in mitigating such risks and may expose us to losses or limit our potential gains
Our operations in Canada expose us to translation and transaction risks associated with fluctuations in foreign currency exchange
rates as compared to the U.S. dollar, our reporting currency. As a result, we are subject to foreign currency exchange risks due to
exchange rate movements in connection with the translation of the operating costs and the assets and liabilities of our foreign
operations into our functional currency for inclusion in our Consolidated Financial Statements.
We are also exposed to foreign currency exchange transaction risk. As part of our risk management program, we may use financial
instruments, including foreign currency exchange forward contracts. While intended to reduce the effects of fluctuations in foreign
currency exchange rates, these instruments may not be effective in reducing all risks related to such fluctuations and may limit
our potential gains or expose us to losses. Although we do not enter into these instruments for trading purposes or speculation,
and our management believes all such instruments are entered into as hedges of underlying physical transactions, these instruments
are dependent on timely performance by our counterparties. Should our counterparties to such instruments or the sponsors of the
exchanges through which these transactions are offered fail to honor their obligations due to financial distress or otherwise, we
would be exposed to potential losses or the inability to recover anticipated gains from the transactions covered by these instruments.
Potential limitations on our ability to access capital resources may restrict our ability to operate
Our operations are capital intensive. Our business also requires substantial expenditures for routine maintenance. While we expect
that our cash requirements, including the funding of capital expenditures, debt service, dividends, share repurchases and
investments, will be financed by internally generated funds or from borrowings under our secured committed bank credit facilities,
there can be no assurance that this will be the case. Additional acquisitions could require financing from external sources. Although
we believe we have adequate access to contractually committed borrowings, we could be adversely affected if our banks were
unable to honor their contractual commitments or ceased lending. Failure to access our credit facilities could restrict our ability
to fund operations, make capital expenditures or execute acquisitions.
The agreement governing our bank credit facility imposes certain restrictions on our business and contains financial
covenants
Our secured bank credit facilities contain certain restrictions on our business which limit (subject to certain exceptions) our ability
to, among other things, incur or suffer to exist certain liens, make investments, incur or guaranty additional indebtedness, enter
into consolidations, mergers, acquisitions, and sales of assets, make distributions and other restricted payments, change the nature
of our business, engage in transactions with affiliates and enter into restrictive agreements, including agreements that restrict the
ability of our subsidiaries to make distributions. These restrictions may affect our ability to operate our business or execute our
strategy and may limit our ability to take advantage of potential business opportunities as they arise. Our bank credit agreement
also requires that we maintain certain financial and other covenants, including a consolidated fixed charge coverage ratio, a
consolidated leverage ratio, and a consolidated asset coverage ratio. Our ability to comply with these covenants may be affected
by events beyond our control, including prevailing economic, financial and industry conditions. Our failure to comply with any
of these restrictions or financial covenants could result in an event of default under the bank credit agreement, and permit our
lenders to cease lending to us and declare all amounts borrowed from them to be due and payable, together with accrued and
unpaid interest. This could require us to refinance our bank facilities, which we may not be able to do at terms acceptable to us,
or at all.
Consolidation in the steel industry may reduce demand for our products
There has been a significant amount of consolidation in the steel industry in recent years that has included steel mills acquiring
steel fabricators to ensure demand for their products. If any of our steel mill's significant remaining customers were to be acquired
by competing steel mills, this could reduce the demand for our products and force us to lower our prices, reducing our revenues,
or to reduce production, which could increase our unit costs and have a material adverse effect on our financial condition and
results of operations.
18 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Failure to realize expected benefits from investments in processing and manufacturing technology may impact our operating
results and cash flows
We make significant investments in processing and manufacturing technology improvements aimed at increasing the efficiency
and capabilities of our businesses and to maximize our economies of scale. Failure to realize the anticipated benefits and generate
adequate returns on such capital improvement projects may have a material adverse effect on our results of operations and cash
flows.
Reliance on third party shipping companies may restrict our ability to ship our products
We generally rely on third parties to handle and transport raw materials to our production facilities and products to customers.
Despite our practice of utilizing a diversified group of suppliers of transportation, factors beyond our control, including changes
in fuel prices, political events, governmental regulation of transportation, changes in market rates, carrier availability, carrier
bankruptcy, shipping industry consolidation and disruptions in transportation infrastructure, may adversely impact our ability to
ship our products. These impacts could include delays or other disruptions in shipments in transit or third party shipping companies
increasing their charges for transportation services or otherwise reducing or eliminating the availability of their vehicles or ships.
As a result, we may not be able to transport our products in a timely and cost-effective manner, which could have a material adverse
effect on our financial condition and results of operations and may harm our reputation.
Equipment upgrades, equipment failures and facility damage may lead to production curtailments or shutdowns
Our recycling and manufacturing processes depend on critical pieces of equipment, including shredders, nonferrous sorting
technology, furnaces and a rolling mill, which may be out of service occasionally for scheduled upgrades or maintenance or as a
result of unanticipated failures. Our facilities are subject to equipment failures and the risk of catastrophic loss due to unanticipated
events such as fires, earthquakes, accidents or violent weather conditions. For instance, our metals recycling operations in Puerto
Rico were briefly interrupted in September 2017 as a result of Hurricane Maria, although the damages to and losses incurred by
the operations were not material. We have insurance to cover certain of the risks associated with equipment damage and resulting
business interruption, but there are certain events that would not be covered by insurance and there can be no assurance that
insurance will continue to be available on acceptable terms. Interruptions in our processing and production capabilities and
shutdowns resulting from unanticipated events could have a material adverse effect on our financial condition, results of operations
and cash flows.
Product liability claims may adversely impact our operating results
We could inadvertently acquire radioactive scrap metal that could potentially be included in mixed scrap metal shipped to consumers
worldwide. Although we have invested in radiation detection equipment in the majority of our locations, including the facilities
from which we ship directly to customers, failure to detect radioactive scrap metal remains a possibility. Even though we maintain
insurance to address the risk of this failure in detection, there can be no assurance that the insurance coverage would be adequate
or will continue to be available on acceptable terms. In addition, if we fail to meet contractual requirements for a product, we may
be subject to product warranty costs and claims. These costs and claims could both have a material adverse effect on our financial
condition and results of operations and harm our reputation.
We are subject to legal proceedings and legal compliance risks that may adversely impact our financial condition, results of
operations and liquidity
We spend substantial resources ensuring that we comply with domestic and foreign regulations, contractual obligations and other
legal standards. Notwithstanding this, we are subject to a variety of legal proceedings and compliance risks in respect of various
matters, including regulatory, safety, environmental, employment, transportation, intellectual property, contractual, import/export,
international trade and governmental matters that arise in the course of our business and in our industry. For example, legal
proceedings can include those arising from accidents involving Company-owned vehicles, including Company tractor trailers. In
some instances, such accidents and the related litigation involve accidents that have resulted in third party fatalities. A negative
outcome in an unusual or significant legal proceeding or compliance investigation in excess of insurance recoveries could adversely
affect our financial condition and results of operations. For information regarding our current significant legal proceedings, see
“Legal Proceedings” in Part I, Item 3 of this report.
19 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Climate change may adversely impact our facilities and our ongoing operations
The potential physical impacts of climate change on our operations are highly uncertain and depend upon the unique geographic
and environmental factors present, for example rising sea levels at our deep water port facilities, changing storm patterns and
intensities, and changing temperature levels. As many of our recycling facilities are located near deep water ports, rising sea levels
may disrupt our ability to receive scrap metal, process the scrap metal through our mega-shredders and ship products to our
customers. Periods of extended adverse weather conditions may inhibit the supply of scrap metal to our recycling facilities, which
could have an adverse effect on our sales or cause us to fail to meet our sales commitments. In addition, sustained periods of
increased temperature levels in the summer in areas where our auto store operations are located could result in reduced customer
traffic, thus resulting in lower admissions and parts sales.
We may not realize our deferred tax assets in the future
The assessment of recoverability of our deferred tax assets is based on an evaluation of existing positive and negative evidence
as to whether it is more likely than not that they will be realized. If negative evidence outweighs positive evidence, a valuation
allowance is required. Impairment of deferred tax assets may result from significant negative industry or economic trends, a
decrease in earnings performance and projections of future taxable income, adverse changes in laws or regulations and a variety
of other factors. Impairment of deferred tax assets could have a material adverse impact on our results of operations and financial
condition and could result in not realizing the deferred tax assets. In recent years, we have recorded significant valuation allowances
against our deferred tax assets, and our low annual effective tax rates in the fiscal years presented in this report are primarily the
result of our full valuation allowance position. Deferred tax assets generated in future periods may require further valuation
allowances if it is not more likely than not that the deferred tax assets will be realized.
Tax increases and changes in tax rules may adversely affect our financial results
As a company conducting business on a global basis with physical operations throughout North America, we are exposed, both
directly and indirectly, to the effects of changes in U.S., state, local and foreign tax rules. Taxes for financial reporting purposes
and cash tax liabilities in the future may be adversely affected by changes in such tax rules. In many cases, such changes put us
at a competitive disadvantage compared to some of our major competitors, to the extent we are unable to pass the tax costs through
to our customers.
One or more cybersecurity incidents may adversely impact our financial condition, results of operations and reputation
We face global cybersecurity risks and threats on a continual and ongoing basis. These risks and threats range from inadvertent
release of sensitive information to sophisticated and targeted measures directed at us. Our operations involve use of multiple
systems that process, store and transmit sensitive information about our customers, suppliers, employees, financial position,
operating results and strategies. While we are not aware of any material cyber-attacks or breaches of our systems to date, we have
and continue to implement measures to safeguard our systems and mitigate potential risks, but there is no assurance that such
actions will be sufficient to prevent cyber-attacks or security breaches that manipulate or improperly use our systems, compromise
sensitive information, destroy or corrupt data, or otherwise disrupt our operations. The occurrence of such events could negatively
impact our reputation and our competitive position and could result in litigation with third parties, regulatory action, loss of
business, potential liability and increased remediation costs, any of which could have a material adverse effect on our financial
condition and results of operations.
Risk Factors Relating to the Regulatory Environment
Environmental compliance costs and potential environmental liabilities may have a material adverse effect on our financial
condition and results of operations
Compliance with environmental laws and regulations is a significant factor in our business. We are subject to local, state and
federal environmental laws and regulations in the U.S. and other countries relating to, among other matters:
•
•
•
•
•
•
•
Waste disposal;
Air emissions;
Waste water and storm water management and treatment;
Soil and groundwater contamination remediation;
Global climate change;
Discharge, storage, handling and disposal of hazardous materials; and
Employee health and safety.
20 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
We are also required to obtain environmental permits from governmental authorities for certain operations. Violation of or failure
to obtain permits or comply with these laws or regulations could result in our business being fined or otherwise sanctioned by
regulators or becoming subject to litigation by private parties. Future environmental compliance costs may increase because of
new laws and regulations, changing interpretations and stricter enforcement of current laws and regulations by regulatory
authorities, uncertainty regarding adequate pollution control levels, the future costs of pollution control technology and issues
related to global climate change.
Our operations use, handle and generate hazardous substances. In addition, previous operations by others at facilities that we
currently or formerly owned, operated or otherwise used may have caused contamination from hazardous substances. As a result,
we are exposed to possible claims, including government fines and penalties, costs for investigation and clean-up activities, claims
for natural resources damages and claims by third parties for personal injury and property damage, under environmental laws and
regulations, especially for the remediation of waterways and soil or groundwater contamination. These laws can impose liability
for the cleanup of hazardous substances even if the owner or operator was neither aware of nor responsible for the release of the
hazardous substances. We have, in the past, been found not to be in compliance with certain of these laws and regulations, and
have incurred liabilities, expenditures, fines and penalties associated with such violations. In addition, we have been notified that
we are or may be a potentially responsible party for actual or possible investigation and cleanup costs from historical contamination
at sites currently or formerly owned or operated by us or at other sites where we may have responsibility for such costs due to
past disposal or other activities. Environmental compliance costs and potential environmental liabilities could have a material
adverse effect on our financial condition, results of operations and cash flows. See also the risk factor “Potential costs related to
the environmental cleanup of Portland Harbor may be material to our financial position and liquidity” in this Item 1A.
Governmental agencies may refuse to grant or renew our licenses and permits, and we may be unable to renew facility
leases, thus restricting our ability to operate
We conduct certain of our operations subject to licenses, permits and approvals from state and local governments. Governmental
agencies often resist the establishment of certain types of facilities in their communities, including auto parts facilities. In addition,
from time to time, both the U.S. and foreign governments impose regulations and restrictions on trade in the markets in which we
operate. In some countries, governments can require us to apply for certificates or registration before allowing shipment of recycled
metal to customers in those countries. There can be no assurance that future approvals, licenses and permits will be granted or
that we will be able to maintain and renew the approvals, licenses and permits we currently hold. Failure to obtain these approvals
could cause us to limit or discontinue operations in these locations or prevent us from developing or acquiring new facilities, which
could have a material adverse effect on our financial condition and results of operations.
We lease a significant portion of our facilities, including the substantial majority of our auto parts facilities. Failure to renew these
leases may impact our ability to continue operations within certain geographic areas, which could have a material adverse effect
on our financial condition, results of operations and cash flows.
Compliance with existing and new greenhouse gas emission laws and regulations may adversely impact our operating
results
Future legislation or increased regulation regarding climate change and GHG emissions could impose significant costs on our
business and our customers and suppliers, including increased energy, capital equipment, environmental monitoring and reporting
and other costs in order to comply with laws and regulations concerning and limitations imposed on climate change and GHG
emissions. The potential costs of allowances, taxes, fees, offsets or credits that may be part of “cap and trade” programs or similar
future legislative or regulatory measures are still uncertain and the future of these programs or measures is unknown. Any adopted
future climate change and GHG laws or regulations could negatively impact our ability (and that of our customers and suppliers)
to compete with companies situated in areas not subject to such limitations. Until the timing, scope and extent of any future laws
or regulations becomes known, we cannot predict the effect on our financial condition, operating performance or ability to compete.
Furthermore, even without such laws or regulations, increased awareness and any adverse publicity in the global marketplace
about the GHGs emitted by companies in the metals recycling and steel manufacturing industries could harm our reputation and
reduce customer demand for our products. See “Business - Environmental Matters” in Part I, Item 1 of this report for further detail.
Risk Factors Relating to Our Employees
Reliance on employees subject to collective bargaining may restrict our ability to operate
Approximately 21% of our full-time employees are represented by unions under collective bargaining agreements, including
substantially all of the manufacturing employees at our CSS steel manufacturing facility. As these agreements expire, we may not
be able to negotiate extensions or replacements of such agreements on acceptable terms. Any failure to reach an agreement with
one or more of our unions may result in strikes, lockouts or other labor actions, including work slowdowns or stoppages, which
could have a material adverse effect on our results of operations.
21 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
The underfunded status of our multiemployer pension plans may cause us to increase our contributions to the plans
As discussed in Note 13 – Employee Benefits in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report,
we contribute to the Steelworkers Western Independent Shops Pension Plan (“WISPP”), a multiemployer plan benefiting union
employees of CSS. Because we have no current intention of withdrawing from the WISPP, we have not recognized a withdrawal
liability in our consolidated financial statements. However, if such a liability were triggered, it could have a material adverse effect
on our results of operations, financial position, liquidity and cash flows. Our contributions to the WISPP could also increase as a
result of a diminished contribution base due to the insolvency or withdrawal of other employers who currently contribute to it,
the inability or failure of withdrawing employers to pay their withdrawal liabilities, or other funding deficiencies, as we would
need to fund the retirement obligations of these employers.
In 2004, the Internal Revenue Service (“IRS”) approved a seven-year extension of the period over which the WISPP may amortize
unfunded liabilities, conditioned upon maintenance of certain minimum funding levels. In 2014, the WISPP obtained relief from
the specified funding requirements from the IRS, which requires that the WISPP meet a minimum funded percentage on each
valuation date and achieve a funded percentage of 100% as of October 1, 2029. Based on the actuarial valuation for the WISPP
as of October 1, 2016, the funded percentage (based on the ratio of the market value of assets to the accumulated benefits liability
(present value of accrued benefits) using the valuation method prescribed by the IRS) was 76.4%, which satisfies the minimum
funded percentage requirements of the IRS.
ITEM 1B. UNRESOLVED STAFF COMMENTS
None.
22 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
ITEM 2. PROPERTIES
Our facilities and administrative offices by type, including their total acreage, were as follows as of August 31, 2017:
Division
Corporate offices – Domestic
Auto and Metals Recycling:
Domestic:(1)
Administrative offices
Collection and processing
Collection
Auto parts stores
Non-operating sites(4)
Foreign:(2)
Collection and processing
Collection
Auto parts stores
Non-operating sites(4)
Cascade Scrap and Steel:
Domestic:
Steel mill and administrative offices
Collection and processing
Collection
Non-operating sites(4)
Total company:
Domestic
Foreign(2)
Total(3)
_____________________________
No. of
Facilities
Leased
Acreage
Owned
Total
1
3
31
4
49
17
3
1
4
7
2
3
2
2
114
15
129
—
—
47
5
583
47
28
6
50
24
—
—
—
—
682
108
790
—
—
445
14
166
160
4
—
—
—
85
98
8
50
—
—
492
19
749
207
32
6
50
24
85
98
8
50
1,026
4
1,030
1,708
112
1,820
(1) We jointly own 36 acres in California at three of our sites and 19 acres in Indiana at one of our sites with minority interest partners.
(2) All foreign facilities are located in Canada.
(3) For long-lived assets by geography, see Note 18 – Segment Information in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report.
(4) Non-operating sites are comprised of owned and leased real properties, some of which are sublet to external parties.
We consider all properties, both owned and leased, to be well-maintained, in good operating condition and suitable and adequate
to carry on our business.
ITEM 3. LEGAL PROCEEDINGS
From time to time, we are involved in various litigation matters that arise in the ordinary course of business involving normal and
routine claims, including environmental compliance matters. Such proceedings include, but are not limited to, proceedings relating
to our status as a potentially responsible party with respect to the Portland Harbor Superfund Site, proceedings relating to other
legacy environmental issues, and proceedings arising from accidents involving Company-owned vehicles, including Company
tractor trailers. For additional information regarding such matters, see Note 9 – Commitments and Contingencies in the Notes to
the Consolidated Financial Statements in Part II, Item 8 of this report. Except as described in such Note, we currently believe that
the ultimate outcome of these proceedings, individually or in the aggregate, will not have a material adverse effect on our
consolidated financial position, results of operations, cash flows or business.
23 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
In fiscal 2013, the Commonwealth of Massachusetts advised us of alleged violations of environmental requirements, including
but not limited to those related to air emissions and hazardous waste management, at our operations in the Commonwealth. We
actively engaged in discussions with the Commonwealth's representatives, which resulted in a settlement agreement to resolve
the alleged violations. A consent judgment was jointly filed with and entered by the Superior Court for the County of Suffolk,
Commonwealth of Massachusetts on September 24, 2015. The settlement involved a $450,000 cash payment, an additional
$450,000 in suspended payments to be waived upon completion of a shredder emission control system and certain other specified
milestones, and $350,000 in supplemental environmental projects that we have completed.
The Alameda County District Attorney and the California Office of the Attorney General, the latter on behalf of certain state
agencies, are jointly investigating alleged violations of environmental requirements, including but not limited to those related to
hazardous waste management and water quality, at one of our operations in the California. We are currently engaged in extensive
discussions with the governmental representatives concerning the nature, extent and schedule for implementation of various facility
upgrades and remedial activities that have been completed or that are underway and are included in our capital expenditure budget
and that we believe will resolve the underlying environmental concerns identified by the agencies. We have also continued to
dispute certain of the allegations that have been raised and maintain that the operational practices giving rise to those allegations
were in compliance with applicable laws. To date, no complaint has been filed by the District Attorney or the State of California
although we anticipate that the settlement of this matter will ultimately involve the simultaneous filing of a complaint and a
stipulation (settlement) that involves a commitment to complete agreed-upon actions, payment of a civil penalty, and reimbursement
of the agencies’ enforcement costs. Completion of a Supplemental Environmental Project may offset some portion of the
penalty. The government has not yet presented a penalty demand or disclosed its enforcement costs, but based on similar
enforcement proceedings that have recently been concluded in the State of California and the government’s positive response to
the facility improvements that have been completed or are underway, we do not believe that the potential penalty or enforcement
costs associated with resolution of this enforcement proceeding will be material to our financial position, results of operations,
cash flows or liquidity.
The California Office of the Attorney General has also received a formal enforcement referral relating to another facility that we
operate in California. This matter grew out of an agency inspection of the facility and subsequent issuance of a Summary of
Violations setting forth a number of alleged violations relating to hazardous waste management requirements. We were notified
by the agency that our response to the Summary of Violations was not accepted and that the matter had been referred to the Attorney
General. We are currently engaged in settlement discussions to resolve this matter. Based on the nature of the specific allegations
and the fact that the activities in question were conducted several years ago and are not ongoing, as well as the settlement discussions
to date and resolution of a similar enforcement proceeding that has recently been concluded in California, we do not believe the
resolution of this threatened enforcement proceeding will be material to our financial position, results of operations, cash flows
or liquidity.
In addition, we were informed in late July 2017 that the New Hampshire Office of the Attorney General is contemplating bringing
a civil action in connection with a legacy environmental issue at a closed facility in New Hampshire owned and previously operated
by New England Metal Recycling LLC (NEMR), an indirectly wholly-owned subsidiary. This matter had been formally referred
to the New Hampshire Office of Attorney General and relates to subsurface automotive shredder residue (ASR) located at the site
that we discovered and self-reported in response to findings from a routine inspection of the site by the New Hampshire Department
of Environmental Services (NHDES) in May 2015. It appears that this subsurface ASR dates back to 2006 or before and may have
resulted from the failure to complete a corrective action plan in 2006, although a former NEMR employee reported at the time
that the work had been completed. In April 2017, NEMR received a letter of deficiency alleging violations of environmental
requirements relating to the characterization and disposal of hazardous waste in connection with the subsurface ASR. We are
continuing to work with the NHDES to prepare and implement a remedial action plan and have accrued for our expected cost of
such work. We expect to enter into settlement negotiations with the Attorney General’s Office prior to filing of any petition in the
event they proceed with an enforcement case. Based on the nature of the specific allegations and the fact that the activities in
question were conducted over ten years ago, as well as our self-reporting of the matter and cooperation to date in pro-actively
pursuing a remediation action plan, we do not believe the resolution of this threatened enforcement proceeding will be material
to our financial position, results of operations, cash flows or liquidity.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
EXECUTIVE OFFICERS OF THE REGISTRANT
Information about our executive officers is incorporated by reference from Part III, Item 10 of this annual report.
24 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
PART II
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND
ISSUER PURCHASES OF EQUITY SECURITIES
Our Class A common stock is listed on the NASDAQ Global Select Market (“NASDAQ”) under the symbol SCHN. There were
192 holders of record of Class A common stock on October 20, 2017. Our Class A common stock has been trading since
November 16, 1993. The following table sets forth the high and low trading stock prices reported on NASDAQ and the dividends
paid per share for the periods indicated.
First Quarter
Second Quarter
Third Quarter
Fourth Quarter
First Quarter
Second Quarter
Third Quarter
Fourth Quarter
Fiscal 2017
High Price
Low Price
Dividends Per Share
$
$
$
$
30.33
30.60
25.00
27.70
$
$
$
$
17.30
22.55
17.50
18.65
$
$
$
$
Fiscal 2016
0.1875
0.1875
0.1875
0.1875
High Price
Low Price
Dividends Per Share
$
$
$
$
17.81
16.93
21.57
20.65
$
$
$
$
12.64
11.70
14.49
14.83
$
$
$
$
0.1875
0.1875
0.1875
0.1875
Our Class B common stock is not publicly traded. There was one holder of record of Class B common stock on October 20, 2017.
Issuer Purchases of Equity Securities
Pursuant to a share repurchase program as amended in 2001 and 2006, we were authorized to repurchase up to 6 million shares
of our Class A common stock when management deems such repurchases to be appropriate. In November 2008, our Board of
Directors approved an increase in the shares authorized for repurchase by 3 million, to 9 million. As of the beginning of fiscal
2015, we had repurchased approximately 6.9 million shares of our Class A common stock under the program. We repurchased
approximately 68 thousand shares for a total of $1 million and 203 thousand shares for a total of $3 million in open-market
transactions in fiscal 2015 and 2016, respectively. We did not repurchase any shares in fiscal 2017. As of August 31, 2017, there
were approximately 1.8 million shares available for repurchase under the program.
The share repurchase program does not require us to acquire any specific number of shares, and we may suspend, extend or
terminate the program at any time without prior notice and the program may be executed through open-market purchases, privately
negotiated transactions or utilizing Rule 10b5-1 programs. We evaluate long- and short-range forecasts as well as anticipated
sources and uses of cash before determining the course of action that would best enhance shareholder value.
Securities Authorized for Issuance under Equity Compensation Plans
See Note 14 - Share-Based Compensation in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report
for information regarding securities authorized for issuance under share-based compensation plans.
25 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Performance Graph
The following graph and related information compares cumulative total shareholder return on our Class A common stock for the
five-year period from September 1, 2012 through August 31, 2017, with the cumulative total return for the same period of (i) the
S&P 500 Index, (ii) the S&P Steel Index and (iii) the NASDAQ Composite Index. These comparisons assume an investment of
$100 at the commencement of the period and that all dividends are reinvested. The stock performance outlined in the performance
graph below is not necessarily indicative of our future performance, and we do not endorse any predictions as to future stock
performance.
Year Ended August 31,
2012
2013
2014
2015
2016
2017
Schnitzer Steel Industries(1)
NASDAQ
$
S&P 500
S&P Steel Index
100
100
100
100
$
94
$
119
119
99
106
153
149
125
$
69
$
78
$
162
149
97
179
168
108
116
223
195
123
_____________________________
(1) Because we operate in two distinct but related businesses, we have no direct market peer issuers.
26 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
ITEM 6. SELECTED FINANCIAL DATA
The following table sets forth selected consolidated financial data for each of the five years in the period ended August 31, 2017.
The selected consolidated financial data presented below should be read in conjunction with Management's Discussion and Analysis
of Financial Condition and Results of Operations set forth in Part II, Item 7 of this Annual Report on Form 10-K and the consolidated
financial statements and the accompanying notes set forth in Part II, Item 8 of this Annual Report on Form 10-K.
2017
Year Ended August 31,
2015
2014
2016
2013
STATEMENT OF OPERATIONS DATA:
(in thousands, except per share and dividend data)
Revenues
Operating income (loss)(1)
Income (loss) from continuing operations
Loss from discontinued operations, net of
tax(2)
Net income (loss) attributable to SSI
Income (loss) per share from continuing
operations attributable to SSI (diluted)
Net income (loss) per share attributable to
SSI (diluted)
Dividends declared per common share
OTHER DATA:
Sales volumes (in thousands)(3):
AMR recycled ferrous metal (tons)(4)
AMR recycled nonferrous metal (pounds)
CSS finished steel products (tons)
Average net selling price(3)(5):
AMR recycled ferrous metal (per ton)
AMR recycled nonferrous metal (per
pound)
CSS finished steel products (per ton)
BALANCE SHEET DATA (in thousands):
Total assets
Long-term debt, net of current maturities
$
$
$
$
$
$
$
$
$
$
$
$
$ 1,687,591
$ 1,352,543
$ 1,915,399
$ 2,534,926
56,013
47,368
$
$
(7,842) $
(16,240) $
(195,529) $
(187,849) $
24,364
12,400
$ 2,616,792
(323,178)
(275,781)
$
$
(390) $
44,511
1.60
1.58
0.750
3,145
540,791
496
242
0.63
534
$
$
$
$
$
$
$
(1,348) $
(19,409) $
(7,227) $
(197,009) $
(2,809) $
$
5,924
(4,242)
(281,442)
(0.66) $
(7.03) $
0.32
(0.71) $
$
0.750
(7.29) $
$
0.750
0.22
0.750
2,899
473,737
488
3,186
539,850
540
3,591
563,530
533
193
0.60
522
$
$
$
264
0.74
639
$
$
$
347
0.82
677
$
$
$
$
$
$
(10.40)
(10.56)
0.750
3,666
528,846
488
351
0.89
680
2017
2016
August 31,
2015
2014
2013
933,755
144,403
$
$
891,429
184,144
$
$
962,299
$ 1,355,210
$ 1,405,512
227,572
$
318,842
$
372,663
_____________________________
(1) Operating income in fiscal 2017 includes other asset impairment charges (recoveries), net, of $(1) million and a net gain from restructuring charges and other
exit-related activities of less than $1 million. Operating loss in fiscal 2016 includes a goodwill impairment charge of $9 million, other asset impairment
charges of $21 million, and restructuring charges and other exit-related activities of $7 million. Operating loss in fiscal 2015 includes a goodwill impairment
charge of $141 million, other asset impairment charges of $45 million, and restructuring charges and other exit-related activities of $13 million. Operating
income in fiscal 2014 includes other asset impairment charges of $1 million and restructuring charges and other exit-related activities of $7 million. Operating
loss in fiscal 2013 includes a goodwill impairment charge of $321 million, other asset impairment charges of $13 million and restructuring charges and other
exit-related activities of $8 million.
(2)
In fiscal 2015, the Company ceased operations at seven auto parts stores, six of which qualified for discontinued operations reporting and whose results have
been removed from other data for all periods presented, as applicable. In fiscal 2014, the Company also released an environmental liability of $1 million
associated with operations disposed in fiscal 2010. See Note 8 - Discontinued Operations in the Notes to the Consolidated Financial Statements in Part II,
Item 8 of this report for further discussion.
(3) Tons for recycled ferrous metal are long tons (2,240 pounds) and for finished steel products are short tons (2,000 pounds).
(4) The Company sold to external customers or delivered to its steel mill an aggregate of 3,628 thousand, 3,289 thousand, 3,708 thousand, 4,309 thousand, and
4,506 thousand tons of ferrous recycled scrap metal in fiscal 2017, 2016, 2015, 2014 and 2013, respectively. Company-wide ferrous volumes include total
ferrous sales volumes for AMR, ferrous tons sold externally by CSS, and ferrous tons delivered by CSS's metals recycling operations to its steel mill, net of
inter-segment eliminations.
(5)
In accordance with generally accepted accounting principles, the Company reports revenues that include amounts billed for freight to customers; however,
average net selling prices are shown net of amounts billed for freight.
27 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF
OPERATIONS
This section includes a discussion of our operations for the three fiscal years ended August 31, 2017, 2016, and 2015. The following
discussion and analysis provides information which management believes is relevant to an assessment and understanding of our
results of operations and financial condition. The discussion should be read in conjunction with the Consolidated Financial
Statements and the related notes thereto in Part II, Item 8 of this report and the Selected Financial Data contained in Part II, Item 6
of this report.
Business
We are one of North America’s largest recyclers of ferrous and nonferrous scrap metal, including end-of-life vehicles, and a
manufacturer of finished steel products.
Prior to the fourth quarter of fiscal 2017, our internal organizational and reporting structure supported two operating and reportable
segments: the Auto and Metals Recycling ("AMR") business and the Steel Manufacturing Business ("SMB"). In the fourth quarter
of fiscal 2017, in accordance with our plan announced in June 2017, we modified our internal organizational and reporting structure
to combine our steel manufacturing operations, which had been reported as our SMB segment, with our Oregon metals recycling
operations, which had been reported within our AMR segment, forming a new division named Cascade Steel and Scrap ("CSS").
The Oregon metals recycling operations include our shredding and export facilities in Portland, Oregon, and also include four
metals recycling feeder yard operations located in Oregon and Southern Washington and one metals recycling joint venture
ownership interest. The Oregon metals recycling operations source substantially all of the scrap raw material needs of our steel
manufacturing operations. This change in organizational structure is intended to enhance our flexibility, generate internal synergies,
and enable us to more effectively adjust to market changes across our recycling and steel manufacturing operations. We began
reporting on this new segment structure in the fourth quarter of fiscal 2017 as reflected in this Annual Report on Form 10-K. The
segment data for the comparable periods presented has been recast to conform to the current period presentation for all activities
of the reorganized segments. Recasting this historical information did not have an impact on the consolidated financial performance
of SSI for any of the periods presented.
We use operating income to measure our segment performance. Restructuring charges and other exit-related activities are not
allocated to segment operating income because we do not include this information in our measurement of the segments’ performance.
Expense related to shared services that support operational activities and transactions is allocated from Corporate to the segments.
Unallocated Corporate expense consists primarily of expense for management and certain administrative services that benefit both
segments. The results of discontinued operations are excluded from segment operating income and are presented separately, net
of tax, from the results of ongoing operations for all periods presented. See Note 18 – Segment Information in the Notes to the
Consolidated Financial Statements in Part II, Item 8 of this report for a discussion of the primary activities of each reportable
segment, total assets by reportable segment, operating results from continuing operations, revenues from external customers and
concentration of sales to foreign countries.
Our results of operations depend in large part on the demand and prices for recycled metal in foreign and domestic markets and
on the supply of raw materials, including end-of-life vehicles, available to be processed at our facilities. We respond to changes
in selling prices for processed metal by seeking to adjust purchase prices for unprocessed scrap metal in order to manage the
impact on our operating income. We believe we generally benefit from sustained periods of rising recycled scrap metal selling
prices, which allow us to better maintain or increase both operating income and unprocessed scrap metal flow into our facilities.
When recycled scrap metal selling prices decline for a sustained period, our operating margins typically compress.
Our deep water port facilities on both the East and West Coasts of the United States (in Everett, Massachusetts; Providence, Rhode
Island; Oakland, California; Tacoma, Washington; and Portland, Oregon) and access to public deep water port facilities (in Kapolei,
Hawaii; and Salinas, Puerto Rico) allow us to efficiently meet the global demand for recycled ferrous metal by shipping bulk
cargoes to steel manufacturers located in Europe, Africa, the Middle East, Asia, and North, Central and South America. Our exports
of nonferrous recycled metal are shipped in containers through various public docks to specialty steelmakers, foundries, aluminum
sheet and ingot manufacturers, copper refineries and smelters, brass and bronze ingot manufacturers and wire and cable producers
globally. We also transport both ferrous and nonferrous metals by truck, rail and barge in order to transfer scrap metal between
our facilities for further processing, to load shipments at our export facilities and to meet regional domestic demand.
Our quarterly operating results fluctuate based on a variety of factors including, but not limited to, changes in market conditions
for ferrous and nonferrous recycled metal and finished steel products, the supply of scrap metal in our domestic markets, and
varying demand for used auto parts from our self-service retail stores. These factors are influenced, to a degree, by the impact of
seasonal changes including severe weather conditions, which can impact the timing of shipments and inhibit construction activity
utilizing our products, scrap metal collection at our facilities, and retail admissions at our auto parts stores.
28 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Strategic Priorities
As we continue to closely monitor economic conditions, we remain focused on the following core strategies and plans to meet
our business goals and objectives:
•
•
•
•
•
•
Long-term expansion of ferrous scrap metal supply and processing, sales volumes and operating margins;
Use of our seven deep water ports and ground-based logistics network to directly access customers domestically
and internationally to meet demand for our products wherever it is greatest;
Further optimization of our integrated operating platform to maximize opportunities for synergies, cost
efficiencies and volumes;
Continuous improvement initiatives to increase production efficiency, enhance effectiveness in our commercial
activities and reduce operating expense;
Technology and process improvement investments to increase the separation and recovery of recycled materials
from our shredding process and to generate more value-added products; and
Increase market share through initiatives to maximize volumes and through selective partnerships, alliances and
acquisitions.
Our auto parts stores are key suppliers to our metal recycling facilities, and we look to enhance the geographic proximity of
operations among those facilities. We have a recycling presence in the Northwestern U.S., in Northern California and in the
Northeastern U.S., near our export facilities in Tacoma, Washington, Portland, Oregon, Oakland, California and Everett,
Massachusetts, which enhances our access to regional supplies of scrap metal and end-of-life vehicles.
In fiscal 2015, we initiated and implemented restructuring initiatives consisting of idling underutilized metals recycling assets,
including a shredder in Johnston, Rhode Island and another shredder in Surrey, British Columbia, and closing seven auto parts
stores at AMR to more closely align our business to market conditions. Additional cost savings and productivity improvement
initiatives, including adjustments to our operating capacity through additional facility closures, were identified and initiated in
fiscal 2016. Facility closures in fiscal 2016 included a small shredding facility in Concord, New Hampshire. Six of the auto parts
stores closed in fiscal 2015 qualified for discontinued operations reporting beginning in fiscal 2015. See Note 8 - Discontinued
Operations and Note 10 - Restructuring Charges and Other Exit-Related Activities in the Notes to the Consolidated Financial
Statements in Part II, Item 8 of this report.
Key economic factors and trends affecting the industries in which we operate
We sell recycled metals to the global steel industry for the production of finished steel. Our financial results largely depend on
supply of raw materials in the U.S. and Western Canada and demand for recycled metal in foreign and domestic markets and for
finished steel products in the Western U.S. and Western Canada. Global economic conditions, changes in supply and demand
conditions, the strength of the U.S. dollar, and the availability and price of raw material alternatives affect market prices for and
sales volumes of recycled ferrous and nonferrous metal in global markets and steel products in the Western U.S. and Western
Canada and can have a significant impact on the results of operations for our reportable segments.
Commencing in fiscal 2012 and spanning through the first half of fiscal 2016, our markets were adversely impacted by a slowdown
of economic activity globally. The macroeconomic uncertainty, combined with global steel-making overproduction and a
strengthening of the U.S. dollar had resulted in deteriorating market conditions for global steel manufacturers and volatile pricing
swings. The weak price environment for recycled metals in fiscal 2015 and the first half of fiscal 2016 was exacerbated by a
decline in iron ore prices, a raw material used in steel-making blast furnaces which compete with EAF mills that use ferrous scrap
metal as their primary feedstock. Low-priced steel billets which use iron ore as their primary raw material, and which are direct
substitutes for ferrous scrap metal in the manufacture of finished steel, also contributed to lower scrap metal demand and prices
during these years. The low economic growth in the U.S. and the lower scrap metal price environment contributed to constrained
scrap flows in the domestic supply markets which led to significantly lower margins in our AMR business during fiscal 2015 and
the first half of fiscal 2016 before prices and margins recovered during the second half of fiscal 2016. In fiscal 2017, the combination
of improved U.S. and global economic growth and lower Chinese steel exports driven by higher domestic demand and reductions
in less efficient steel-making capacity contributed to improved demand and prices for ferrous recycled scrap metal, positively
impacting our operating results.
29 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Our operating results in fiscal 2017 benefited from improved market conditions, increased sales diversification, improved supply
volumes, expanded nonferrous metal recovery, and additional benefits from our multi-year cost reduction and productivity
improvement measures compared to the prior two years. The higher price environment for scrap metal during fiscal 2017 together
with benefits from commercial initiatives to improve supply channels and an improved trend in U.S. economic conditions led to
an increase in the supply of scrap metal in our domestic market, including end-of-life vehicles, resulting in higher processed
volumes compared to fiscal 2016. The higher price environment also positively impacted the spread between direct purchase costs
and selling prices of ferrous recycled metal compared to the prior year.
Executive Overview of Financial Results
We generated consolidated revenues of $1.7 billion in fiscal 2017, an increase of 25% from the $1.4 billion of consolidated revenues
generated in fiscal 2016, primarily due to improved market conditions for recycled metals in the domestic and export markets
resulting in higher average net selling prices and increased sales volumes compared to the prior year, including benefits from
increased sales diversification.
Consolidated operating income was $56 million in fiscal 2017, compared to consolidated operating loss of $8 million in fiscal
2016. Adjusted consolidated operating income in fiscal 2017 was $54 million, compared to $28 million in the prior year. Adjusted
results in fiscal 2017 exclude net recoveries on previously impaired assets of $1 million, a net gain from restructuring and exit-
related activities of less than $1 million, and recoveries related to the resale or modification of previously contracted shipments
of $1 million. Adjusted results in fiscal 2016 exclude the impact of a goodwill impairment charge of $9 million, other asset
impairment charges of $21 million, restructuring charges and other exit-related activities of $7 million, and recoveries related to
the resale or modification of previously contracted shipments of $1 million. See the reconciliation of adjusted consolidated operating
income (loss) in Non-GAAP Financial Measures at the end of this Item 7.
Operating results in fiscal 2017 benefited from better market conditions, increased sales diversification, improved supply volumes,
expanded nonferrous metal recovery, and additional benefits from cost savings and productivity improvement initiatives compared
to fiscal 2016. The higher price environment for scrap metal in fiscal 2017 together with benefits from commercial initiatives to
improve supply channels and an improved trend in U.S. economic conditions also led to an increase in the supply of scrap metal,
including end-of-life vehicles, resulting in higher processed volumes and improved operating results, primarily at AMR, compared
to the prior year. The stronger price environment also positively impacted the spread between direct purchase costs and selling
prices of ferrous recycled metal at AMR, with the metal spread for fiscal 2017 expanding by approximately 10% compared to the
prior year. Operating results in fiscal 2016 were adversely impacted by a lower price environment which included sharp declines
in commodity selling prices during the first half of fiscal 2016 resulting in an unfavorable impact from average inventory accounting
during the year. This compares to a favorable impact from average inventory accounting in fiscal 2017 which, relative to performance
benefits from other drivers, was not a major contributor to the improvement in operating results year over year. CSS's operating
results improved, with operating income of just over $5 million for fiscal 2017, compared to just under $5 million for the prior
year. CSS's operating results included a net recovery on previously impaired assets of $1 million in fiscal 2017, compared to asset
impairments of $4 million in fiscal 2016. The benefits to CSS from higher finished steel selling prices and sales volumes in fiscal
2017 were more than offset by continued pressure from low-priced imports and the adverse impact of the downtime and costs
associated with major equipment upgrades at our steel mill during the first quarter of fiscal 2017.
Operating results in fiscal 2016 were also adversely impacted by a non-cash goodwill impairment charge of $9 million in a reporting
unit within AMR and non-cash other asset impairment charges of $21 million primarily at AMR. See Results of Operations, Asset
Impairment Charges (Recoveries), net in this Item 7 for further details on asset impairment charges.
Consolidated selling, general and administrative ("SG&A") expense in fiscal 2017 increased by $23 million, or 15%, compared
to the prior year primarily due to higher employee-related expenses, including an increase in incentive compensation accruals
resulting from improved financial performance, other expenses related to higher volumes, and increased environmental liabilities.
This increase was partially offset by incremental benefits from cost savings and productivity improvement measures. SG&A
expense in fiscal 2016 included a $6 million benefit from an insurance reimbursement.
In recent years, we implemented a number of cost reduction and productivity improvement measures to more closely align our
business to market conditions. The combined benefit of the measures initiated since the beginning of fiscal 2015 represents a
targeted annual improvement to operating performance of approximately $95 million. In fiscal 2017, we achieved the full $95
million in combined benefits related to these measures, compared to $78 million and $28 million of benefits in fiscal 2016 and
2015, respectively. In total, we have achieved approximately $160 million in combined annual benefits to operating performance
since announcing the initial phase of these cost savings and productivity initiatives at the end of fiscal 2012. Charges incurred in
connection with the foregoing initiatives are discussed in Results of Operations, Restructuring Charges and Other Exit-Related
Activities in this Item 7.
30 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Net income from continuing operations attributable to SSI in fiscal 2017 was $45 million, or $1.60 per diluted share, compared
to net loss from continuing operations attributable to SSI of $18 million, or $(0.66) per diluted share, in the prior year. Adjusted
net income from continuing operations attributable to SSI in fiscal 2017 was $43 million, or $1.53 per diluted share, compared to
$19 million, or $0.69 per diluted share, in the prior year. See the reconciliation of adjusted net income (loss) from continuing
operations attributable to SSI in Non-GAAP Financial Measures at the end of this Item 7.
The following items further highlight selected liquidity and capital structure metrics:
•
•
•
Net cash provided by operating activities of $100 million in fiscal 2017, compared to $99 million in the prior year;
Debt of $145 million as of August 31, 2017, compared to $193 million as of the prior year-end; and
Debt, net of cash, of $138 million as of August 31, 2017, compared to $166 million as of the prior year-end (see the
reconciliation of debt, net of cash, in Non-GAAP Financial Measures at the end of this Item 7).
31 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Results of Operations
($ in thousands)
Revenues:
For the Year Ended August 31,
% Increase / (Decrease)
2017
2016
2015
2017 vs 2016
2016 vs 2015
Auto and Metals Recycling
$ 1,363,618
$ 1,060,592
$ 1,513,315
Cascade Steel and Scrap
Intercompany revenue eliminations(1)
Total revenues
Cost of goods sold:
Auto and Metals Recycling
Cascade Steel and Scrap
Intercompany cost of goods sold eliminations(1)
Total cost of goods sold
Selling, general and administrative expense:
Auto and Metals Recycling
Cascade Steel and Scrap
Corporate(2)
Total selling, general and administrative
expense
(Income) from joint ventures:
Auto and Metals Recycling
Cascade Steel and Scrap
Total (income) from joint ventures
Goodwill impairment charges:
Auto and Metals Recycling
Other asset impairment charges (recoveries), net:
Auto and Metals Recycling
Cascade Steel and Scrap
Corporate
Total other asset impairment charges
(recoveries), net
Operating income (loss):
Auto and Metals Recycling
Cascade Steel and Scrap
Segment operating income (loss)
Restructuring charges and other exit-related
activities(3)
Corporate expense(2)
Change in intercompany profit elimination(4)
339,620
(15,647)
1,687,591
304,032
(12,081)
1,352,543
435,113
(33,029)
1,915,399
1,158,154
905,863
1,372,456
322,013
(15,659)
1,464,508
283,006
(12,881)
1,175,988
402,374
(32,152)
1,742,678
116,461
106,691
122,279
14,321
40,788
12,571
29,646
12,998
35,315
171,570
148,908
170,592
—
8,845
141,021
(184)
(533)
—
16,411
4,192
79
44,374
—
745
(717)
20,682
45,119
91,405
5,275
96,680
109
(40,788)
12
23,168
4,696
27,864
(166,119)
20,535
(145,584)
(6,781)
(29,725)
800
(13,008)
(36,060)
(877)
(7,842) $ (195,529)
(2,218)
(1,456)
(3,674)
(386)
(433)
(819)
(696)
(794)
(1,490)
475 %
236 %
349 %
29 %
12 %
30 %
25 %
28 %
14 %
22 %
25 %
9 %
14 %
38 %
15 %
NM
NM
NM
NM
NM
295 %
12 %
247 %
NM
37 %
(99)%
NM
(30)%
(30)%
(63)%
(29)%
(34)%
(30)%
(60)%
(33)%
(13)%
(3)%
(16)%
(13)%
(45)%
(45)%
(45)%
(94)%
(63)%
NM
(89)%
(54)%
(114)%
(77)%
(119)%
(48)%
(18)%
NM
(96)%
Total operating income (loss)
$
56,013
$
_____________________________
NM = Not Meaningful
(1) AMR sells a small portion of its recycled ferrous metal to CSS at prices that approximate local market rates. These intercompany revenues and cost of goods
sold are eliminated in consolidation.
(2) Corporate expense consists primarily of unallocated expenses for management and certain administrative services that benefit both reportable segments.
(3) Restructuring charges consist of expense for severance, contract termination and other restructuring costs that management does not include in its measurement
of the performance of the reportable segments. Other exit-related activities consist of asset impairments and accelerated depreciation, net of gains on exit-
related disposals, related to site closures.
Intercompany profits are not recognized until the finished products are sold to third parties; therefore, intercompany profit is eliminated while the products
remain in inventory.
(4)
32 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
We operate our business across two reportable segments: AMR and CSS. Additional financial information relating to these
reportable segments is contained in Note 18 - Segment Information in the Notes to the Consolidated Financial Statements in Part
II, Item 8 of this report.
Auto and Metals Recycling
($ in thousands, except for prices)
2017
2016
2015
2017 vs 2016
2016 vs 2015
For the Year Ended August 31,
% Increase / (Decrease)
$
843,222
$
625,517
$
Ferrous revenues
Nonferrous revenues
Retail and other revenues
Total segment revenues
Cost of goods sold
Selling, general and administrative expense
(Income) from joint ventures
Goodwill impairment charges
Other asset impairment charges (recoveries),
net
Segment operating income (loss)
Average recycled ferrous metal sales prices
($/LT):(1)
Domestic
Foreign
Average
$
$
$
$
Ferrous sales volume (LT, in thousands):
Domestic
Foreign
Total ferrous sales volume (LT, in
thousands)
Average nonferrous sales price ($/pound)(1)(2) $
Nonferrous sales volumes (pounds, in
thousands)(2)
Cars purchased (in thousands)(3)
Number of auto parts stores at period end
394,977
125,419
1,363,618
1,158,154
116,461
(2,218)
—
(184)
91,405
236
244
242
948
2,197
3,145
$
$
$
$
330,351
104,724
1,060,592
905,863
106,691
(386)
8,845
16,411
23,168
188
196
193
859
2,040
2,899
$
$
$
$
0.63
$
0.60
$
934,057
449,815
129,443
1,513,315
1,372,456
122,279
(696)
141,021
44,374
(166,119)
261
265
264
1,003
2,183
3,186
0.74
540,791
473,737
539,850
411
53
319
52
337
55
Outbound freight included in cost of goods
sold
$
97,400
$
77,477
$
110,789
_____________________________
LT = Long Ton, which is 2,240 pounds
NM = Not meaningful
(1) Price information is shown after netting the cost of freight incurred to deliver the product to the customer.
(2) Average sales price and volume information excludes platinum group metals ("PGMs") in catalytic converters.
(3) Cars purchased by auto parts stores only.
Fiscal 2017 compared with fiscal 2016
AMR Segment Revenues
35%
20%
20%
29%
28%
9%
475%
NM
NM
295%
26%
24%
25%
10%
8%
9%
5%
14%
29%
2%
26%
(33)%
(27)%
(19)%
(30)%
(34)%
(13)%
(45)%
(94)%
(63)%
NM
(28)%
(26)%
(27)%
(14)%
(7)%
(9)%
(19)%
(12)%
(5)%
(5)%
(30)%
Revenues in fiscal 2017 increased by 29% compared to fiscal 2016 primarily due to improved market conditions for recycled
metals in the domestic and export markets resulting in higher average net selling prices and increased sales volumes compared to
the prior year, including benefits from increased sales diversification. Average net selling prices for shipments of ferrous scrap
metal in fiscal 2017 increased by 25% compared to the prior year. Ferrous sales volumes in fiscal 2017 also increased by 9%
compared to the prior year due to higher export and domestic shipments in fiscal 2017. Additionally, nonferrous sales volumes in
fiscal 2017 were higher by 14% compared to the prior year, and nonferrous average net selling prices were higher by 5%.
33 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
AMR Segment Operating Income
Operating income for fiscal 2017 was $91 million, compared to $23 million in fiscal 2016. Adjusted operating income in fiscal
2017 was $90 million, compared to $48 million in the prior year. See the reconciliation of AMR adjusted operating income (loss)
in Non-GAAP Financial Measures at the end of this Item 7.
Operating results in fiscal 2017 benefited from better market conditions, increased sales diversification, improved supply volumes,
expanded nonferrous metal recovery, and additional benefits from cost savings and productivity improvement initiatives compared
to fiscal 2016. The higher price environment for scrap metal in fiscal 2017 together with benefits from commercial initiatives to
improve supply channels and an improved trend in U.S. economic conditions also led to an increase in the supply of scrap metal,
including end-of-life vehicles, resulting in higher processed volumes compared to the prior year. The stronger price environment
also positively impacted the spread between direct purchase costs and selling prices of ferrous recycled metal at AMR, with the
metal spread for fiscal 2017 expanding by approximately 10% compared to the prior year. Operating results in fiscal 2016 were
adversely impacted by a lower price environment which included sharp declines in commodity selling prices during the first half
of fiscal 2016 resulting in an unfavorable impact from average inventory accounting during the year. This compares to a favorable
impact from average inventory accounting in fiscal 2017 which, relative to performance benefits from other drivers, was not a
major contributor to the improvement in AMR's operating results year over year.
In the second quarter of fiscal 2016, we identified a triggering event requiring an interim impairment test of goodwill allocated
to our reporting units. The impairment test resulted in a non-cash goodwill impairment charge of $9 million at a reporting unit
within AMR. We also recorded non-cash impairment charges and accelerated depreciation on certain long-lived and other assets
at AMR of $16 million primarily related to certain regional metals recycling operations and used auto parts store locations and
certain previously-idled recycling equipment assets. See Results of Operations, Asset Impairment Charges (Recoveries), net in
this Item 7 for further details on asset impairment charges.
AMR SG&A expense in fiscal 2017 increased by $10 million, or 9%, compared to the prior year primarily due to higher employee-
related expenses, including an increase in incentive compensation accruals resulting from improved financial performance, other
expenses related to higher volumes, and increased environmental liabilities. This increase was partially offset by incremental
benefits from cost savings and productivity improvement measures to reduce direct costs of production and SG&A expense. AMR
operating results in fiscal 2017 were positively impacted by $11 million of incremental benefits from these measures.
AMR's results of operations do not include operating results from discontinued operations. See Note 8 – Discontinued Operations
in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report.
Fiscal 2016 compared with fiscal 2015
AMR Segment Revenues
The 33% decrease in ferrous revenues and 27% decrease in nonferrous revenues in fiscal 2016 were primarily due to significantly
lower average net selling prices for ferrous and nonferrous scrap metal, as well as reduced sales volumes compared to the prior
year. After experiencing sharp declines in the first half of fiscal 2016, net selling prices for shipments of ferrous scrap metal
increased significantly during the third quarter of fiscal 2016, primarily due to improved demand, before decreasing in the fourth
quarter and returning to the levels seen at the beginning of the fiscal year. Overall demand for recycled metals in our end-markets
was weaker than in the prior year primarily due to continued low global economic growth, the relative strength of the U.S. dollar
and the impact of lower iron ore prices during most of the fiscal year. This resulted in significantly lower average net selling prices
for ferrous and nonferrous scrap metal and reduced sales volumes in fiscal 2016 compared to the prior year.
AMR Segment Operating Income (Loss)
Operating income for fiscal 2016 was $23 million , compared to operating loss of $166 million in the prior year. Adjusted operating
income in fiscal 2016 was $48 million, which excludes a goodwill impairment charge of $9 million, other asset impairment charges
of $16 million and benefits from contract settlements of $1 million. Adjusted operating income in fiscal 2015 was $26 million,
which excludes a goodwill impairment charge of $141 million, other asset impairment charges of $44 million and the impact of
reselling or modifying the terms of certain previously contracted bulk ferrous shipments of $7 million. See the reconciliation of
AMR adjusted operating income (loss) in Non-GAAP Financial Measures at the end of this Item 7.
Operating results during fiscal 2016 and 2015 were adversely impacted by the lower price environment which included sharp
declines in commodity selling prices during the first half of each year and asset impairment charges recorded in each year. Operating
results in the second half of fiscal 2016 benefited from an increase in ferrous average net selling prices after experiencing sharp
declines during the first half of the fiscal year which resulted in the adverse impact from average inventory accounting in fiscal
2016 being significantly less than the adverse impact in fiscal 2015. Operating results in fiscal 2016 also benefited from cost
savings and productivity improvement measures initiated in fiscal 2015, and further expanded in fiscal 2016, to reduce direct costs
of production and SG&A expense. Excluding the adverse impact of asset impairment charges, these benefits contributed to higher
34 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
operating margins per ferrous ton sold at AMR compared to fiscal 2015 despite lower average net selling prices and sales volumes.
SG&A expense in fiscal 2016 decreased by $16 million, or 13%, compared to fiscal 2015 primarily resulting from reduced
employee-related expenses.
In the second quarter of fiscal 2016, we identified a triggering event requiring an interim impairment test of goodwill allocated
to our reporting units. The impairment test resulted in a non-cash goodwill impairment charge of $9 million at a reporting unit
within the AMR operating segment. We also recorded non-cash impairment charges and accelerated depreciation on certain long-
lived and other assets at AMR of $16 million primarily related to certain regional metals recycling operations and used auto parts
store locations and certain recycling equipment assets which were previously idled.
In the second quarter of fiscal 2015, we identified a triggering event requiring an interim impairment test of goodwill which
resulted in a non-cash goodwill impairment charge of $141 million. We also recorded non-cash impairment charges and accelerated
depreciation on certain long-lived and other assets at AMR of $44 million primarily in connection with certain strategic actions
we undertook to improve our operating performance which included reducing shredding capacity and closing auto parts stores.
Cascade Steel and Scrap
($ in thousands, except for price)
Steel revenues(1)
Recycling revenues(2)
Total segment revenues
Cost of goods sold
Selling, general and administrative expense
(Income) from joint ventures
Other asset impairment charges (recoveries), net
Segment operating income
Finished steel average sales price ($/ST)(3)
Finished steel products sold (ST, in thousands)
Rolling mill utilization(4)
_____________________________
ST = Short Ton, equivalent to 2,000 pounds
For the Year Ended August 31,
2017
$ 280,767
58,853
339,620
322,013
14,321
(1,456)
(533)
5,275
534
$
$
2016
$ 269,905
34,127
304,032
283,006
12,571
(433)
4,192
4,696
522
$
$
2015
$ 375,037
60,076
435,113
402,374
12,998
(794)
—
20,535
639
$
$
% Increase / (Decrease)
2017 vs 2016
4%
72%
12%
14%
14%
236%
NM
12%
2%
2016 vs 2015
(28)%
(43)%
(30)%
(30)%
(3)%
(45)%
NM
(77)%
(18)%
496
83%
488
63%
540
73%
2%
32%
(10)%
(14)%
(1) Steel revenues include primarily sales of finished steel products, semi-finished goods (billets) and manufacturing scrap.
(2) Recycling revenues include primarily sales of ferrous and nonferrous recycled scrap metal to export markets.
(3) Price information is shown after netting the cost of freight incurred to deliver the product to the customer.
(4) Rolling mill utilization for fiscal 2017 is based on effective annual production capacity under current conditions of 580 thousand tons of finished steel
products, reflecting a decrease in the effective finished steel production capacity resulting from the decommissioning of the older rolling mill during the first
quarter of fiscal 2017.
Fiscal 2017 compared with fiscal 2016
CSS Segment Revenues
Revenues in fiscal 2017 increased by $36 million, or 12%, compared to fiscal 2016 primarily due to increased export sales of
ferrous recycled scrap metal, higher average selling prices for our finished steel products reflecting the impact of higher steel-
making raw material costs, and higher sales volumes for finished steel products due to stronger demand in the West Coast markets.
CSS Segment Operating Income
Operating income for fiscal 2017 was just over $5 million, compared to operating income of just under $5 million in the prior
year. Adjusted operating income in fiscal 2017 was $5 million, compared to adjusted operating income of $9 million in fiscal
2016. Adjusted results in fiscal 2017 exclude a net recovery on previously impaired assets of $1 million. Adjusted results in fiscal
2016 exclude other asset impairment charges of $4 million. See the reconciliation of CSS adjusted operating income in Non-
GAAP Financial Measures at the end of this Item 7.
35 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Operating results in fiscal 2017 benefited from stronger demand for our finished steel products in the West Coast markets during
the fourth quarter and improved market conditions for ferrous and nonferrous recycled scrap metal in the export markets. The
benefits from the improved conditions were partially offset by continued pressure from low-priced imports and costs of $2 million
associated with a major equipment upgrade at our steel mill in the first quarter of fiscal 2017. Operating results for both fiscal
years were adversely impacted by selling prices for finished steel products falling faster than cost of goods sold, primarily during
the first half of each year, resulting in compressed operating margins. Operating results in fiscal 2016 were adversely affected by
impairment charges of $2 million on steel mill supplies inventory and $2 million on an investment in a metals recycling joint
venture. Fiscal 2017 operating results included a net recovery on previously impaired assets of $1 million consisting primarily of
a gain on the sale of a previously impaired metals recycling joint venture investment.
Fiscal 2016 compared with fiscal 2015
CSS Segment Revenues
Revenues decreased by $131 million, or 30%, for fiscal 2016 compared to the prior year. This decrease was primarily due to
reduced average selling prices and sales volumes for our finished steel products driven by increased competition from lower-
priced imports of finished steel products and the impact on selling prices of reduced steel-making raw material costs primarily
during the first half of fiscal 2016. Finished steel sales volumes improved in the second half of fiscal 2016 compared to the first
half of the fiscal year primarily due to the impact of seasonally stronger construction activity, but remained lower than levels
achieved in fiscal 2015. Weaker demand in the export markets for ferrous and nonferrous recycled scrap metal contributed to
reduced recycled metal revenues compared to the prior year.
CSS Segment Operating Income
Operating income for fiscal 2016 was $5 million, a decrease of $16 million compared to $21 million in the prior year. Adjusted
operating income in fiscal 2016, excluding other asset impairment charges of $4 million, was $9 million, compared to adjusted
operating income of $21 million in fiscal 2015. See the reconciliation of CSS adjusted operating income in Non-GAAP Financial
Measures at the end of this Item 7.
The year-over-year reduction in operating results was primarily due to the declining price environment for our finished steel
products during the first half of fiscal 2016 which led to selling prices falling faster than cost of goods sold. Additionally, finished
steel sales volumes decreased primarily due to increased competition from imported steel products. The rolling mill utilization
rate decreased primarily due to lower sales volumes compared to the prior year and the optimization of inventory levels.
36 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Asset Impairment Charges (Recoveries), net
During the periods presented, we recorded non-cash impairment charges and accelerated depreciation on certain long-lived and
other assets, as well as recoveries on certain previously impaired assets. The following asset impairment charges and subsequent
recoveries, excluding goodwill impairment charges, were recorded in the Consolidated Statements of Operations (in thousands):
Reported within other asset impairment charges (recoveries), net:
Year Ended August 31,
2017
2016
2015
Auto and Metals Recycling
Long-lived assets
Accelerated depreciation
Investments in joint ventures
Assets held for sale
Other assets
Total Auto and Metals Recycling
Cascade Steel and Scrap
Accelerated depreciation
Investments in joint ventures
Supplies inventory
Total Cascade Steel and Scrap
Corporate - Other assets
Reported within restructuring charges and other exit-related activities:
Long-lived assets
Accelerated depreciation
Supplies inventory
Other assets
Exit-related gains
Reported within discontinued operations:
Long-lived assets
Accelerated depreciation
Total
Corporate
$
— $
—
860
(1,044)
—
(184)
401
(934)
—
(533)
—
(717)
—
96
—
62
(565)
(407)
—
—
—
(1,124) $
$
7,336
$
41,676
6,208
—
1,659
1,208
16,411
—
1,968
2,224
4,192
79
20,682
468
630
1,047
35
(1,337)
843
673
274
947
22,472
$
—
—
2,558
140
44,374
—
—
—
—
745
45,119
—
3,836
—
—
—
3,836
2,666
—
2,666
51,621
Corporate expense is comprised almost entirely of unallocated SG&A expense for management and certain administrative services
that benefit both reportable segments. Corporate SG&A expense was $41 million, $30 million and $35 million for the fiscal years
2017, 2016, and 2015, respectively. The higher level of expense for fiscal 2017 is due to an increase in incentive compensation
accruals resulting from improved financial performance and the inclusion of a $6 million benefit from an insurance reimbursement
in fiscal 2016.
37 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Restructuring Charges and Other Exit-Related Activities
Consolidated operating results in fiscal 2017 also included a net benefit from restructuring charges and other exit-related activities
of less than $1 million, compared to charges of $7 million in fiscal 2016 and $13 million in fiscal 2015. Additional restructuring
charges and other exit-related activities of less than $1 million were included in the results of discontinued operations in fiscal
2017, compared to charges of $1 million for fiscal 2016 and $4 million for fiscal 2015. Restructuring charges consisted of severance,
contract termination and other restructuring costs. Other exit-related activities of less than $1 million in fiscal 2017 included a
gain recorded in connection with the disposition of business assets related to the elimination of a metals recycling feeder yard
operation, resulting in a net benefit from restructuring charges and other exit-related activities for the period. Other exit-related
activities of $2 million and $7 million in fiscal 2016 and 2015, respectively, consisted of asset impairments and accelerated
depreciation of assets in connection with the closure of certain operations, net of gains on exit-related disposals. The charges
incurred during the periods presented primarily pertain to restructuring initiatives announced in the second quarter of fiscal 2015
and expanded in subsequent periods (the "Q2'15 Plan"). Consolidated operating results for the periods presented also reflect
benefits from cost reduction and productivity improvement measures initiated prior to the second quarter of fiscal 2015 and an
immaterial amount of associated costs.
Since the beginning of fiscal 2015, we have initiated and implemented a number of additional cost reduction and productivity
improvement measures with a combined targeted annual benefit of approximately $95 million. These initiatives included those
announced in the first quarter of fiscal 2015 ( the "Q1'15 Plan") followed by further cost-saving and exit-related measures as part
of the Q2'15 Plan targeting a combined benefit to annual operating performance of approximately $60 million, subsequently
increased by $5 million in the first quarter of fiscal 2016. In the second quarter of fiscal 2016, we expanded the Q2'15 Plan
initiatives by an additional $30 million.
The cost reduction and productivity improvements associated with the Q1'15 Plan were driven by a combination of revenue drivers
and production and SG&A cost reduction initiatives with a targeted aggregate annual improvement of $14 million, which was
achieved in fiscal 2016. The improvements to performance associated with the Q2'15 Plan included two components. The first
component reflected strategic actions initiated in the second quarter of fiscal 2015 consisting of idling shredding equipment and
closing seven auto parts stores at AMR to align our business to market conditions, targeting a benefit to annual operating performance
of approximately $18 million, of which approximately one-third was from reduced depreciation expense. As part of the second
component of the Q2'15 Plan, in April 2015, we initiated measures, and also announced the integration of the former Metals
Recycling Business and Auto Parts Business into the combined AMR platform, in order to achieve operational synergies and
further reduce our annual operating expenses, primarily SG&A expense, by approximately $28 million through personnel
reductions, eliminating organizational layers, consolidating shared service functions and reducing other administrative costs. We
expanded the Q2'15 Plan and target by initiating measures primarily in the first and second quarters of fiscal 2016 with an additional
$35 million in expected benefits primarily through further reductions in personnel, savings from procurement activities,
streamlining of administrative and supporting services functions, and adjustments to our operating capacity through additional
facility closures, with approximately two-thirds of the target coming from a reduction in SG&A expense and the rest from a
reduction in production costs, primarily at AMR. In fiscal 2017, we achieved the approximately $95 million in combined benefits
related to these measures, compared to $78 million and $28 million of benefits in fiscal 2016 and 2015, respectively.
In total, we have achieved approximately $160 million in combined annual benefit to operating performance since announcing
the first cost savings and productivity initiatives at the end of fiscal 2012, which includes approximately $95 million of the benefits
described above.
38 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Restructuring charges and other exit-related activities incurred in connection with cost reduction and productivity improvement
plans for the last three fiscal years ended August 31 were comprised of the following (in thousands):
2017
2016
2015
All
Other
Plans
Q2’15
Plan
Total
Charges
All
Other
Plans
Q2’15
Plan
Total
Charges
All
Other
Plans
Q2’15
Plan
Total
Charges
Restructuring charges:
Severance costs
$ — $
(24) $
(24)
$ — $ 4,915
$ 4,915
$
139
—
115
394
—
370
311
—
311
796
—
1,107
—
5,711
6,022
391
377
1,223
1,991
$ 5,330
$ 5,721
1,245
2,048
8,623
1,622
3,271
10,614
Contract termination costs
Other restructuring costs
Total restructuring charges
Other exit-related activities:
Asset impairments and
accelerated depreciation
Gains on exit-related
disposals
Total other exit-related
activities
Total restructuring charges and
exit-related activities
255
—
255
—
—
—
158
158
— 3,127
3,127
— 6,502
6,502
(565)
(565)
— (1,337)
(1,337)
—
—
—
(407)
(407)
— 1,790
1,790
— 6,502
6,502
$
255
$ (292) $
(37)
$
311
$ 7,501
$ 7,812
$ 1,991
$15,125
$17,116
Restructuring charges and other exit-related
activities included in continuing operations
Restructuring charges and other exit-related
activities included in discontinued operations
$ (109)
$
72
$ 6,781
$ 1,031
$13,008
$ 4,108
We do not include restructuring charges and other exit-related activities in the measurement of the performance of our reportable
segments. The significant majority of restructuring charges require us to make cash payments.
See Note 10 - Restructuring Charges and Other Exit-Related Activities in the Notes to the Consolidated Financial Statements in
Part II, Item 8 of this report.
Other Income, net
Other income, net was $1 million, $1 million and $4 million for fiscal 2017, 2016 and 2015, respectively. The change between
fiscal 2015 and 2016 was primarily due to changes in foreign currency gains and losses on transactions denominated in Canadian
dollars. For more information about our foreign currency transactions, see Note 2 – Summary of Significant Accounting Policies
in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report.
Interest Expense
Interest expense was $8 million, $9 million and $9 million for fiscal 2017, 2016 and 2015, respectively. The impact on fiscal 2017
interest expense of reduced average borrowings under our bank credit facilities compared to fiscal 2016 was offset by higher
interest rates. The impact on fiscal 2016 interest expense of reduced average borrowings compared to fiscal 2015 was offset by
higher interest rates and the write-off of debt issuance costs of $1 million. For more information about our outstanding debt
balances, see Note 7 – Debt in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report.
Income Tax (Expense) Benefit
Income (loss) from continuing operations before income taxes
Income tax (expense) benefit
Effective tax rate
Year Ended August 31,
$
$
2017
$
$
48,690
(1,322)
2.7%
2016
(15,505)
(735)
(4.7)%
$
$
2015
(200,464)
12,615
6.3%
Income tax (expense) benefit from continuing operations was $(1) million, $(1) million and $13 million for fiscal 2017, 2016 and
2015, respectively.
39 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Our effective tax rate from continuing operations in fiscal 2017 was an expense of 2.7%, which was lower than the U.S. federal
statutory rate of 35% primarily due to our full valuation allowance positions and federal income tax refund claims, partially offset
by increases in deferred tax liabilities from indefinite-lived assets in all jurisdictions. The valuation allowances on our deferred
tax assets are the result of negative objective evidence, including the effects of historical losses in our tax jurisdictions, outweighing
positive objective and subjective evidence, indicating that it is more likely than not that the associated tax benefit will not be
realized.
Our effective tax rate from continuing operations in fiscal 2016 was an expense of 4.7%, which was lower than the U.S. federal
statutory rate of 35%. The effective tax rate was reduced for valuation allowances on deferred tax assets and the aggregate impact
of foreign income taxed at different rates. Those reductions were partially offset by the realization of deductible foreign investment
basis for tax purposes. Our income tax expense is comprised primarily of the increase in deferred tax liabilities from indefinite-
lived assets plus certain state cash tax expenses. The increase in valuation allowance on deferred tax assets was recognized as a
result of negative evidence, including recent losses in all tax jurisdictions, outweighing the more subjective positive evidence,
indicating that it is more likely than not that the associated tax benefit will not be realized.
Our effective tax rate from continuing operations in fiscal 2015 was a benefit of 6.3%, which was lower than the U.S. federal
statutory rate of 35%. The effective tax rate was reduced by 33% for valuation allowances on deferred tax assets and the aggregate
impact of excluding foreign income taxed at different rates. Those expenses were partially offset by the recognition of a $13 million
benefit related to the realization of deductible foreign investment basis for tax purposes. The increase in valuation allowance on
deferred tax assets was recognized as a result of negative evidence, including recent losses in all tax jurisdictions, outweighing
the more subjective positive evidence, indicating that it is more likely than not that the associated tax benefit will not be realized.
Realization of the deferred tax assets is dependent upon generating sufficient taxable income in the associated tax jurisdictions in
future years to benefit from the reversal of net deductible temporary differences and from the utilization of net operating losses.
We will continue to regularly assess the realizability of deferred tax assets. Changes in historical earnings performance and future
earnings projections, among other factors, may cause us to adjust our valuation allowance on deferred tax assets, which would
impact our results of operations in the period we determine that these factors have changed. It is reasonably possible that sufficient
positive evidence required to release a portion of our valuation allowance within the next twelve months may result in a reduction
to the valuation allowance, which could be material.
See Note 15 - Income Taxes in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report for further
discussion.
Discontinued Operations
In fiscal 2015, we ceased operations at seven auto parts stores, six of which qualified for discontinued operations reporting. The
operations of the six qualifying stores had previously been reported within the AMR reportable segment. In fiscal 2016 and 2015,
we recorded impairment charges and accelerated depreciation of $1 million and $3 million, respectively, on the long-lived assets
of discontinued auto parts stores. Impaired assets in fiscal 2016 consisted primarily of capital lease assets associated with the
buildings on two leased properties.
The results of discontinued operations were comprised of the following (in thousands):
Revenues
Loss from discontinued operations before income taxes
Income tax benefit
Loss from discontinued operations, net of tax
Year Ended August 31,
2017
2016
2015
$
$
$
— $
(390) $
—
(390) $
— $
(1,348) $
—
(1,348) $
8,263
(7,227)
—
(7,227)
See Note 8 - Discontinued Operations in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this report for
further discussion.
40 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Liquidity and Capital Resources
We rely on cash provided by operating activities as a primary source of liquidity, supplemented by current cash on hand and
borrowings under our existing credit facilities.
Sources and Uses of Cash
We had cash balances of $7 million and $27 million as of August 31, 2017 and 2016, respectively. Cash balances are intended to
be used primarily for working capital, capital expenditures, dividends, share repurchases, investments and acquisitions. We use
excess cash on hand to reduce amounts outstanding under our credit facilities. As of August 31, 2017, debt was $145 million,
compared to $193 million as of August 31, 2016, and debt, net of cash, was $138 million, compared to $166 million as of August
31, 2016 (refer to Non-GAAP Financial Measures below). Debt, net of cash, decreased by $28 million primarily as a result of the
positive cash flows generated by operating activities.
Operating Activities
Net cash provided by operating activities in fiscal 2017 was $100 million, compared to $99 million in fiscal 2016 and $145 million
in fiscal 2015.
Net cash provided by operating activities in fiscal 2017 primarily benefited from improved operating performance compared to
the prior year. Sources of cash in fiscal 2017 included a $33 million increase in accounts payable primarily due to higher raw
material purchase prices and the timing of payments, and a $12 million increase in accrued payroll and related liabilities due to
increases in incentive compensation accruals resulting from improved financial performance. Uses of cash in fiscal 2017 included
a $22 million increase in inventory due to higher raw material purchase prices, higher volumes on hand and the impact of timing
of purchases and sales, and a $36 million increase in accounts receivable primarily due to increases in recycled metal selling prices
and sales volumes, and the timing of sales and collections.
Sources of cash in fiscal 2016 included a $28 million decrease in inventories due to the impact of lower raw material prices and
timing of purchases and sales, a $6 million decrease in refundable income taxes due to collection of tax refunds, and a $6 million
insurance reimbursement. Uses of cash included a $11 million increase in accounts receivable due to the timing of sales and
collections. A significant amount of cash generated by operating activities in fiscal 2015 and 2016 stemmed from a reduction in
net working capital primarily as a result of the declining price environment for ferrous and nonferrous scrap metal and finished
steel and to a lesser extent lower inventory volumes, as well as positive operating performance.
Sources of cash in fiscal 2015 included a $56 million decrease in accounts receivable primarily due to the timing of sales and
collections and a $69 million decrease in inventories due to the impacts of decreasing raw materials prices and timing of purchases
and sales. Uses of cash included a $36 million decrease in accounts payable due to lower raw material purchase prices and the
timing of payments.
Investing Activities
Net cash used in investing activities in fiscal 2017 was $45 million, compared to $30 million in fiscal 2016 and $28 million in
fiscal 2015.
Cash used in investing activities in fiscal 2017, 2016 and 2015 included $45 million, $35 million and $32 million, respectively,
in capital expenditures to upgrade our equipment and infrastructure and for additional investments in environmental and safety-
related assets. For all fiscal years presented, the significant majority of capital expenditures were associated with projects at AMR.
Financing Activities
Net cash used in financing activities for fiscal 2017 was $75 million, compared with $65 million in fiscal 2016 and $119 million
in fiscal 2015.
Cash used in financing activities in fiscal 2017, 2016 and 2015 included $20 million for cash dividends in each fiscal year and
$48 million, $36 million and $91 million, respectively, in net repayments of debt. Refer to Non-GAAP Financial Measures below.
41 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Debt
Following is a summary of our outstanding balances and availability on credit facilities and long-term debt, exclusive of capital
lease obligations (in thousands):
Bank secured revolving credit facilities(1)
Other debt obligations
_____________________________
Outstanding
as of
8/31/2017
Remaining
Availability
$
$
140,000
$
197,040
706
N/A
(1) Remaining availability is net of $10 million of outstanding stand-by letters of credit as of August 31, 2017.
Our senior secured revolving credit facilities, which provide for revolving loans of $335 million and C$15 million, mature in April
2021 pursuant to a credit agreement with Bank of America, N.A., as administrative agent, and other lenders party thereto. Interest
rates on outstanding indebtedness under the agreement are based, at our option, on either the London Interbank Offered Rate
("LIBOR"), or the Canadian equivalent, plus a spread of between 1.75% and 2.75%, with the amount of the spread based on a
pricing grid tied to the Company’s leverage ratio, or the greater of (a) the prime rate, (b) the federal funds rate plus 0.50%, or (c)
the daily rate equal to one-month LIBOR plus 1.75%, in each case plus a spread of between zero and 1.00% based on a pricing
grid tied to the Company's leverage ratio. In addition, commitment fees are payable on the unused portion of the credit facilities
at rates between 0.20% and 0.40% based on a pricing grid tied to our leverage ratio.
We had borrowings outstanding under the credit facilities of $140 million and $180 million as of August 31, 2017 and 2016,
respectively. The weighted average interest rate on amounts outstanding under this facility was 3.48% and 3.01% as of August
31, 2017 and 2016, respectively.
We use the credit facilities to fund working capital, capital expenditures, dividends, share repurchases, investments and acquisitions.
The credit agreement contains various representations and warranties, events of default and financial and other customary covenants
which limit (subject to certain exceptions) our ability to, among other things, incur or suffer to exist certain liens, make investments,
incur or guaranty additional indebtedness, enter into consolidations, mergers, acquisitions, and sales of assets, make distributions
and other restricted payments, change the nature of our business, engage in transactions with affiliates and enter into restrictive
agreements, including agreements that restrict the ability of our subsidiaries to make distributions. The financial covenants under
the credit agreement include (a) a consolidated fixed charge coverage ratio, defined as the four-quarter rolling sum of consolidated
adjusted EBITDA less defined maintenance capital expenditures divided by consolidated fixed charges; (b) a consolidated leverage
ratio, defined as consolidated funded indebtedness divided by the sum of consolidated net worth and consolidated funded
indebtedness; and (c) a consolidated asset coverage ratio, defined as the consolidated asset value of eligible assets divided by the
consolidated funded indebtedness.
As of August 31, 2017, we were in compliance with the financial covenants under the credit agreement. The consolidated fixed
charge coverage ratio was required to be no less than 1.50 to 1.00 and was 3.16 to 1.00 as of August 31, 2017. The consolidated
leverage ratio was required to be no more than 0.55 to 1.00 and was 0.22 to 1.00 as of August 31, 2017. The asset coverage ratio
was required to be no less than 1.00 to 1.00 and was 1.80 to 1.00 as of August 31, 2017.
The Company's obligations under the credit agreement are guaranteed by substantially all of our subsidiaries. The credit facilities
and the related guarantees are secured by senior first priority liens on certain of our and our subsidiaries’ assets, including equipment,
inventory and accounts receivable.
While we expect to remain in compliance with the financial covenants under the credit agreement, there can be no assurances that
we will be able to do so in the event market conditions or other negative factors which adversely impact our results of operations
and financial position lead to a trend of consolidated net losses. If we do not maintain compliance with our financial covenants
and are unable to obtain an amendment or waiver from our lenders, a breach of a financial covenant would constitute an event of
default and allow the lenders to exercise remedies under the agreements, the most severe of which is the termination of the credit
facility under our committed bank credit agreement and acceleration of the amounts owed under the agreement. In such case, we
would be required to evaluate available alternatives and take appropriate steps to obtain alternative funds. There can be no assurances
that any such alternative funds, if sought, could be obtained or, if obtained, would be adequate or on acceptable terms.
As of August 31, 2016, we had $8 million of tax-exempt economic development revenue bonds outstanding with the State of
Oregon and scheduled to mature in January 2021. In August 2016, we exercised our option to redeem the bonds prior to maturity.
We repaid the bonds in full in September 2016. The obligation is reported as a current liability within short-term borrowings as
of August 31, 2016 on the Consolidated Balance Sheet, and the $8 million repayment is reported as a cash outflow from financing
activities for the year ended August 31, 2017 on the Consolidated Statement of Cash Flows.
42 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Capital Expenditures
Capital expenditures totaled $45 million, $35 million and $32 million for fiscal 2017, 2016 and 2015, respectively. Capital
expenditures in each of these years were primarily to upgrade our equipment and infrastructure and for additional investments in
environmental and safety-related projects. We currently plan to invest in the range of $55 million to $70 million in capital
expenditures in fiscal 2018, an increase from the expenditures made in fiscal 2017 and 2016 primarily due to increased equipment
replacement and upgrades, further investment in nonferrous processing technologies, and environmental projects using cash
generated from operations and available credit facilities.
Environmental Compliance
Building on our commitment to recycling and operating our business in an environmentally responsible manner, we continue to
invest in facilities that improve our environmental presence in the communities in which we operate. As part of our capital
expenditures, we invested $17 million, $14 million and $10 million for environmental projects in fiscal 2017, 2016 and 2015,
respectively. We plan to invest up to $20 million in capital expenditures for environmental projects in fiscal 2018. These projects
include investments in storm water systems and equipment to ensure ongoing compliance with air quality and other environmental
regulations.
We have been identified by the United States Environmental Protection Agency (“EPA”) as one of the potentially responsible
parties that own or operate or formerly owned or operated sites which are part of or adjacent to the Portland Harbor Superfund
site (“the Site”). See Note 9 – Commitments and Contingencies in the Notes to the Consolidated Financial Statements in Part II,
Item 8 of this report for a discussion of this matter. We believe it is not possible to reasonably estimate the amount or range of
costs which we are likely to or which it is reasonably possible that we will incur in connection with the Site, although such costs
could be material to our financial position, results of operations, cash flows and liquidity. We have insurance policies that we
believe will provide reimbursement for costs we incur for defense, remediation and mitigation for natural resource damages claims
in connection with the Site, although there are no assurances that those policies will cover all of the costs which we may incur.
Significant cash outflows in the future related to the Site could reduce the amounts available for borrowing that could otherwise
be used for working capital, capital expenditures, dividends, share repurchases, investments and acquisitions and could result in
our failure to maintain compliance with certain covenants in our debt agreements, and could adversely impact our liquidity.
Share Repurchase Program
Pursuant to our amended share repurchase program, we have existing authorization to repurchase up to approximately 1.8 million
shares of our Class A common stock when we deem such repurchases to be appropriate. We evaluate long- and short-range forecasts
as well as anticipated sources and uses of cash before determining the course of action in our share repurchase program. As of the
beginning of fiscal 2015, we had repurchased approximately 6.9 million shares of our Class A common stock under the program.
We repurchased approximately 68 thousand shares for a total of $1 million and 203 thousand shares for a total of $3 million in
open-market transactions in fiscal 2015 and 2016, respectively. We did not repurchase any shares in fiscal 2017.
Assessment of Liquidity and Capital Resources
Historically, our available cash resources, internally generated funds, credit facilities and equity offerings have financed our
acquisitions, capital expenditures, working capital and other financing needs.
We generally believe our current cash resources, internally generated funds, existing credit facilities and access to the capital
markets will provide adequate short-term and long-term liquidity needs for working capital, capital expenditures, share repurchases,
dividends, joint ventures, debt service requirements, environmental obligations, investments and acquisitions. However, in the
event of a sustained market deterioration, we may need additional liquidity, which would require us to evaluate available alternatives
and take appropriate steps to obtain sufficient additional funds. There can be no assurances that any such supplemental funding,
if sought, could be obtained or, if obtained, would be adequate or on acceptable terms.
Off-Balance Sheet Arrangements
None requiring disclosure pursuant to Item 303 of Regulation S-K under the Securities Exchange Act of 1934.
43 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Contractual Obligations and Commitments
We have certain contractual obligations to make future payments. The following table summarizes these future obligations as of
August 31, 2017 (in thousands):
2018
2019
Payment Due by Period
2022
2021
2020
Thereafter
Total
Contractual Obligations
Long-term debt(1)
Interest payments on long-term debt(2)
Capital leases, including interest
Operating leases
Purchase obligations(3)
Other(4)
Total
$
41
$
153
$
92
$140,050
$
4,904
1,169
19,572
73,230
217
4,914
1,043
16,824
15,143
314
4,900
1,022
13,333
14,985
311
3,135
885
7,894
3,591
308
53
26
753
5,317
2,067
305
$
317
$140,706
61
1,824
22,410
5,600
3,325
17,940
6,696
85,350
114,616
4,780
$ 99,133
$ 38,391
$ 34,643
$155,863
$
8,521
$
33,537
$370,088
_____________________________
(1) Long-term debt represents the principal amounts of all outstanding long-term debt, maturities of which extend to 2027.
(2)
Interest payments on long-term debt are based on interest rates in effect as of August 31, 2017. As contractual interest rates and the amount of debt outstanding
is variable in certain cases, actual cash payments may differ from the estimates provided.
(3) Purchase obligations include all enforceable, legally binding agreements to purchase goods or services that specify all significant terms, regardless of the
duration of the agreement, including purchases of inventory items to be sold in the ordinary course of business.
(4) Other contractual obligations consist of pension funding obligations and other accrued liabilities.
We maintain stand-by letters of credit to provide support for certain obligations, including workers’ compensation and performance
bonds. At August 31, 2017, we had $10 million outstanding under these arrangements.
Critical Accounting Policies and Estimates
The preparation of financial statements in accordance with accounting principles generally accepted in the United States of America
requires us to make certain judgments, estimates, and assumptions regarding uncertainties that affect the reported amounts of
assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. An accounting policy is deemed
to be critical if it requires an accounting estimate to be made based on assumptions and judgments about matters that are inherently
uncertain at the time the estimate is made, if different estimates reasonably could have been used, or if changes in the estimate
that are reasonably likely to occur could materially impact our consolidated financial statements. We deem critical accounting
policies to be those that are most important to the portrayal of our financial condition and results of operations. Because of the
uncertainty inherent in these matters, actual results could differ from the estimates we use in applying the critical accounting
policies. We are not currently aware of any reasonably likely events or circumstances that would result in materially different
amounts being reported.
Our critical accounting estimates include those related to goodwill, long-lived assets, environmental costs, inventories, accounting
for business combinations and revenue recognition.
Goodwill
We evaluate goodwill for impairment annually and upon the occurrence of certain triggering events or substantive changes in
circumstances that indicate that the fair value of goodwill may be impaired. Impairment of goodwill is tested at the reporting unit
level. A reporting unit is an operating segment or one level below an operating segment (referred to as a ‘component’).
When testing goodwill for impairment, we have the option to first assess qualitative factors to determine whether the existence
of events or circumstances leads to a determination that it is more likely than not that the estimated fair value of a reporting unit
is less than its carrying amount. If we elect to perform a qualitative assessment and determine that an impairment is more likely
than not, we are then required to perform the quantitative impairment test, otherwise no further analysis is required. We also may
elect not to perform the qualitative assessment and, instead, proceed directly to the quantitative impairment test.
As of the beginning of the third quarter of fiscal 2017, we early-adopted an accounting standard update that revises the quantitative
goodwill impairment test with no impact to the Consolidated Financial Statements. Under the revised guidance, we apply a one-
step quantitative test and record the amount of goodwill impairment as the excess of a reporting unit's carrying amount over its
fair value, not to exceed the total amount of goodwill allocated to that reporting unit.
44 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
We estimate the fair value of the reporting units using an income approach based on the present value of expected future cash
flows utilizing a market-based weighted average cost of capital (“WACC”) determined separately for each reporting unit. To
estimate the present value of the cash flows that extend beyond the final year of the discounted cash flow model, we employ a
terminal value technique, whereby we use estimated operating cash flows minus capital expenditures, adjust for changes in working
capital requirements in the final year of the model, and then discount these estimated cash flows by the WACC to establish the
terminal value.
The determination of fair value using the income approach requires judgment and involves the use of significant estimates and
assumptions about expected future cash flows derived from internal forecasts and the impact of market conditions on those
assumptions. Critical assumptions primarily include revenue growth rates driven by future commodity prices and volume
expectations, operating margins, capital expenditures, working capital requirements, tax rates, terminal growth rates, discount
rates, benefits associated with a taxable transaction and synergistic benefits available to market participants.
We also use a market approach based on earnings multiple data and our Company’s market capitalization to corroborate our
reporting units’ valuations. We reconcile the Company’s market capitalization to the aggregated estimated fair value of our reporting
units, including consideration of a control premium representing the estimated amount a market participant would pay to obtain
a controlling interest.
As a result of the inherent uncertainty associated with forming the estimates described above, actual results could differ from those
estimates. Future events and changing market conditions may impact our assumptions as to future revenue and operating margin
growth rates, market-based WACC, and other factors that may result in changes in our estimates of the reporting units' fair value.
Although we believe the assumptions used in testing our reporting units’ goodwill for impairment are reasonable, declines in
market conditions from current levels, a trend of weaker than anticipated financial performance for the reporting unit with allocated
goodwill, a decline in our share price from current levels for a sustained period of time, or an increase in the market-based WACC,
among other factors, could significantly impact our impairment analysis and may result in future goodwill impairment charges
that, if incurred, could have a material adverse effect on our financial condition and results of operations.
In the fourth quarter of fiscal 2017, we performed the annual goodwill impairment test as of July 1, 2017. As of the testing date,
the balance of the Company's goodwill of $167 million was carried by a single reporting unit within the AMR operating segment.
We elected to first assess qualitative factors to determine whether the existence of events or circumstances led to a determination
that it is more likely than not that the estimated fair value of the reporting unit is less than its carrying amount. As a result of the
qualitative assessment, we concluded that it is not more likely than not that the fair value of the reporting unit is less than its
carrying value as of the testing date and, therefore, no further impairment testing was required.
Long-Lived Assets
We test long-lived tangible and intangible assets for impairment at the asset group level, which is determined based on the lowest
level for which identifiable cash flows are largely independent of the cash flows of other groups of assets and liabilities. For our
metals recycling operations reported within AMR, an asset group is generally comprised of the regional shredding and export
operation along with surrounding feeder yards. For regions with no shredding and export operations, each metals recycling yard
is an asset group. For our auto parts operations, generally each auto parts store is an asset group. The combined steel manufacturing
and metals recycling operations within CSS are a single asset group. Prior to their combination into CSS in the fourth quarter of
fiscal 2017, our steel manufacturing operations and Oregon metals recycling operations were distinct asset groups. We test our
asset groups for impairment when certain triggering events or changes in circumstances indicate that the carrying value of the
asset group may be impaired. If the carrying value of the asset group is not recoverable because it exceeds the estimate of future
undiscounted cash flows from the use and eventual disposition of the asset group, an impairment loss is recognized by the amount
the carrying value exceeds its fair value, if any. The impairment loss is allocated to the long-lived assets of the group on a pro rata
basis using the relative carrying amounts of those assets, except that the loss allocated to an individual long-lived asset of the
group shall not reduce the carrying amount of that asset below its fair value. Fair value is determined primarily using the cost and
market approaches.
With respect to individual long-lived assets, changes in circumstances may merit a change in the estimated useful lives or salvage
values of the assets, which are accounted for prospectively in the period of change. For such assets, the useful life is shortened
based on our current plans to dispose of or abandon the asset before the end of its original useful life and depreciation is accelerated
beginning when that determination is made.
45 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Environmental Costs
We operate in industries that inherently possess environmental risks. To manage these risks, we employ both our own environmental
staff and outside consultants. Environmental staff and finance personnel meet regularly to discuss environmental risks. We estimate
future costs for known environmental remediation requirements and accrue for them on an undiscounted basis when it is probable
that we have incurred a liability and the related costs can be reasonably estimated but the timing of incurring the estimated costs
is unknown. The regulatory and government management of these projects is complex, which is one of the primary factors that
make it difficult to assess the cost of potential and future remediation. When only a wide range of estimated amounts can be
reasonably established and no other amount within the range is better than any other, the low end of the range is recorded in the
financial statements. If further developments or resolution of an environmental matter result in facts and circumstances that are
significantly different than the assumptions used to develop these liabilities, the accrual for environmental remediation could be
materially understated or overstated. Adjustments to these liabilities are made when additional information becomes available that
affects the estimated costs to study or remediate any environmental issues or when expenditures for which accruals are established
are made. The factors we consider in the recognition and measurement of environmental liabilities include:
•
•
•
•
•
Current regulations, both at the time the liability is established and during the course of the investigation or
remediation process, which specify standards for acceptable remediation;
Information about the site which becomes available as the site is studied and remediated;
The professional judgment of senior level internal staff, who take into account similar, recent instances of
environmental remediation issues, and studies of our sites, among other considerations;
Available technologies that can be used for remediation; and
The number and financial condition of other potentially responsible parties and the extent of their responsibility
for the costs of study and remediation.
Our accrued environmental liabilities as of August 31, 2017 included $1 million related to third party investigation costs for the
Portland Harbor Superfund site. Because there has not been a determination of the total cost of the investigations, the remediation
that will be required, the amount of natural resource damages or how the costs of the ongoing investigations and any remedy and
natural resource damages will be allocated among the PRPs, we believe it is not possible to reasonably estimate the amount or
range of costs which are likely or reasonably possible that we may incur in connection with the Site, although such costs could
be material to our financial position, results of operations, cash flows and liquidity. Therefore, no additional amounts have been
accrued. See Contingencies – Environmental in Note 9 – Commitments and Contingencies in the Notes to the Consolidated
Financial Statements in Part II, Item 8 of this report.
Inventories
Our inventories consist of processed and unprocessed scrap metal (ferrous, nonferrous, and nonferrous recovered joint product
arising from the manufacturing process), semi-finished steel products (billets), finished steel products (primarily rebar, merchant
bar and wire rod), used and salvaged vehicles, and supplies. Inventories are stated at the lower of cost or market. We consider
estimated future selling prices when determining the estimated net realizable value for our inventory. As we generally sell our
recycled ferrous metal under contracts that provide for shipment within 30 to 60 days after the price is agreed, we utilize the selling
prices under committed contracts and sales orders for determining the estimated market price of quantities on hand.
The accounting process we use to record metal quantities relies on significant estimates. With respect to unprocessed metal
inventory, we rely on weighed quantities that are reduced by estimated amounts that are moved into production. These estimates
utilize estimated recoveries and yields that are based on historical trends. Over time, these estimates are reasonably good indicators
of what is ultimately produced; however, actual recoveries and yields can vary depending on product quality, moisture content
and source of the unprocessed metal. If ultimate recoveries and yields are significantly different than estimated, the value of our
inventory could be materially overstated or understated. To assist in validating the reasonableness of these estimates, we periodically
review shrink factors and perform monthly physical inventory estimates. However, due to variations in product density, holding
period and production processes utilized to manufacture the product, physical inventories will not necessarily detect all variances.
To mitigate this risk, we adjust the ferrous physical inventories when the volume of a commodity is low and a physical inventory
count can more accurately estimate the remaining volume.
Revenue Recognition
We recognize revenue when we have a contract or purchase order from a customer with a fixed or determinable price, the title
and risk of loss transfer to the buyer and collectibility is reasonably assured. Title for both metal and finished steel products transfers
based on contract terms. A significant portion of our ferrous export sales of recycled metal are made with letters of credit, reducing
46 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
credit risk. However, domestic recycled ferrous metal sales, nonferrous sales and sales of finished steel are generally made on
open account. Nonferrous export sales typically require a deposit prior to shipment. All sales made on open account are evaluated
for collectibility prior to revenue recognition. Additionally, when contractual terms support revenue recognition based on transfer
of title and risk of loss we recognize revenues on partially loaded shipments, which requires an estimate of the product weight
involved in any partial shipments at period end. Retail revenues are recognized when customers pay for parts. Historically, there
have been very few sales returns and adjustments that impact the ultimate collection of revenues; therefore, no material provisions
have been made when the sale is recognized. We present taxes assessed by governmental authorities collected from customers on
a net basis. Therefore, the taxes are excluded from revenue and are shown as a liability on our Consolidated Balance Sheets until
remitted. See the discussion on credit risk contained in Item 7A of this report.
Recently Issued Accounting Standards
For a description of recent accounting pronouncements that may have an impact on our financial condition, results of operations
or cash flows, see Note 3 – Recent Accounting Pronouncements in the Notes to the Consolidated Financial Statements in Part II,
Item 8 of this report.
Non-GAAP Financial Measures
Debt, net of cash
Debt, net of cash is the difference between (i) the sum of long-term debt and short-term borrowings (i.e., total debt) and (ii) cash
and cash equivalents. We believe that debt, net of cash is a useful measure for investors because, as cash and cash equivalents can
be used, among other things, to repay indebtedness, netting this against total debt is a useful measure of our leverage.
The following is a reconciliation of debt, net of cash (in thousands):
Short-term borrowings
Long-term debt, net of current maturities
Total debt
Less: cash and cash equivalents
Total debt, net of cash
Net borrowings (repayment) of debt
August 31, 2017 August 31, 2016 August 31, 2015
$
$
721
$
8,374
$
144,403
145,124
7,287
184,144
192,518
26,819
137,837
$
165,699
$
584
227,572
228,156
22,755
205,401
Net borrowings (repayment) of debt is the sum of borrowings from long-term debt, repayments of long-term debt, proceeds from
line of credit, and repayment of line of credit. We present this amount as the net change in our borrowings (repayments) for the
period because we believe it is useful for investors as a meaningful presentation of the change in debt.
The following is a reconciliation of net borrowings (repayments) of debt (in thousands):
Borrowings from long-term debt
Proceeds from line of credit
Repayment of long-term debt
Repayment of line of credit
Net repayments of debt
Fiscal 2017
433,336
$
—
(481,757)
—
(48,421) $
Fiscal 2016
152,311
$
135,500
(187,951)
(135,500)
(35,640) $
Fiscal 2015
140,536
$
266,500
(231,103)
(266,500)
(90,567)
$
47 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Adjusted consolidated operating income (loss), adjusted AMR operating income (loss), adjusted CSS operating income, adjusted
net income (loss) from continuing operations attributable to SSI, and adjusted diluted earnings (loss) per share from continuing
operations attributable to SSI
Management believes that providing these non-GAAP financial measures adds a meaningful presentation of our results from
business operations excluding adjustments for goodwill impairment charges, other asset impairment charges net of recoveries,
restructuring charges and other exit-related activities, recoveries related to the resale or modification of previously contracted
shipments, the non-cash write-off of debt issuance costs, and income tax expense (benefit) associated with these adjustments, items
which are not related to underlying business operational performance, and improves the period-to-period comparability of our
results from business operations. Adjusted operating results in fiscal 2015 excluded the impact from the resale or modification of
the terms, each at significantly lower prices due to sharp decline in selling prices, of certain previously contracted bulk shipments
for delivery during fiscal 2015. Recoveries resulting from settlements with the original contract parties, which began in fiscal
2016, are reported within SG&A expense in the Consolidated Statements of Operations and are also excluded from the measures.
The following is a reconciliation of adjusted consolidated operating income (loss), adjusted AMR operating income (loss), and
adjusted CSS operating income (in thousands):
Fiscal 2017
Fiscal 2016
Fiscal 2015
Consolidated operating income (loss):
As reported
Goodwill impairment charges
Other asset impairment charges (recoveries), net
Restructuring charges and other exit-related activities
Resale or modification of previously contracted shipments, net of recoveries
Adjusted
AMR operating income (loss):
As reported
Goodwill impairment charges
Other asset impairment charges (recoveries), net
Resale or modification of previously contracted shipments, net of recoveries
Adjusted
CSS operating income (loss):
As reported
Other asset impairment charges (recoveries), net
Adjusted
$
$
$
$
$
$
56,013
$
—
(717)
(109)
(1,144)
54,043
$
(7,842) $
8,845
(195,529)
141,021
20,682
6,781
(694)
27,772
$
45,119
13,008
6,928
10,547
91,405
$
23,168
$
—
(184)
(1,144)
90,077
5,275
(533)
4,742
$
$
$
8,845
16,411
(694)
47,730
4,696
4,192
8,888
$
$
$
(166,119)
141,021
44,374
6,928
26,204
20,535
—
20,535
48 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
The following is a reconciliation of adjusted net income (loss) from continuing operations attributable to SSI and adjusted diluted
earnings (loss) per share from continuing operations attributable to SSI (in thousands, except per share data):
Fiscal 2017
Fiscal 2016
Fiscal 2015
Net income (loss) from continuing operations attributable to SSI:
As reported
Goodwill impairment charges
Other asset impairment charges (recoveries), net
Restructuring charges and other exit-related activities
Resale or modification of previously contracted shipments, net of recoveries
Non-cash write-off of debt issuance costs
Income tax expense (benefit) allocated to adjustments(1)
Adjusted
Diluted earnings (loss) per share from continuing operations attributable to SSI:
As reported
Goodwill impairment charges, per share
Other asset impairment charges (recoveries), net, per share
Restructuring charges and other exit-related activities, per share
Resale or modification of certain previously contracted shipments, net of
recoveries, per share
Non-cash write-off of debt issuance costs, per share
Income tax expense (benefit) allocated to adjustments, per share(1)
Adjusted
$
$
(18,061) $
8,845
(189,782)
141,021
$
44,901
$
—
(717)
(109)
(1,144)
—
—
20,682
6,781
(694)
768
529
42,931
$
18,850
$
1.60
$
—
(0.03)
—
(0.04)
—
—
$
1.53
$
(0.66) $
0.32
0.76
0.25
(0.03)
0.03
0.02
0.69
$
45,119
13,008
6,928
—
(12,703)
3,591
(7.03)
5.22
1.67
0.48
0.26
—
(0.47)
0.13
___________________________
(1)
Income tax allocated to the aggregate adjustments reconciling reported and adjusted net income (loss) from continuing operations attributable to SSI and
diluted earnings (loss) per share from continuing operations attributable to SSI is determined based on a tax provision calculated with and without the
adjustments.
We believe that these non-GAAP financial measures allow for a better understanding of our operating and financial performance.
These non-GAAP financial measures should be considered in addition to, but not as a substitute for, the most directly comparable
U.S. GAAP measures. Although we find these non-GAAP financial measures useful in evaluating the performance of our business,
our reliance on these measures is limited because the adjustments often have a material impact on our consolidated financial
statements presented in accordance with GAAP. Therefore, we typically use these adjusted amounts in conjunction with our GAAP
results to address these limitations.
49 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Commodity Price Risk
We are exposed to commodity price risk, mainly associated with variations in the market price for ferrous and nonferrous metals,
including scrap metal, finished steel products, autobodies and other commodities. The timing and magnitude of industry cycles
are difficult to predict and are impacted by general economic conditions. We respond to increases and decreases in forward selling
prices by adjusting purchase prices. We actively manage our exposure to commodity price risk and monitor the actual and expected
spread between forward selling prices and purchase costs and processing and shipping expense. Sales contracts are based on prices
negotiated with our customers, and generally orders are placed 30 to 60 days ahead of shipment date. However, financial results
may be negatively impacted when forward selling prices fall more quickly than we can adjust purchase prices or when customers
fail to meet their contractual obligations. We assess the net realizable value of inventory (“NRV”) each quarter based upon contracted
sales orders and estimated future selling prices. Based on contracted sales and estimates of future selling prices, a 10% decrease
in the selling price of inventory would not have had a material NRV impact on any of our reportable segments as of August 31,
2017 and 2016.
Interest Rate Risk
We are exposed to market risk associated with changes in interest rates related to our debt obligations. Our revolving credit facility
is subject to variable interest rates and therefore have exposure to changes in interest rates. If market interest rates had changed
10% from actual interest rate levels in fiscal 2017 or 2016, the effect on our interest expense and net income would not have been
material.
Credit Risk
Credit risk relates to the risk of loss that might occur as a result of non-performance by counterparties of their contractual obligations
to take delivery of scrap metal and finished steel products and to make financial settlements of these obligations, or to provide
sufficient quantities of scrap metal or payment to settle advances, loans and other contractual receivables in connection with
demolition and scrap extraction projects. We manage our exposure to credit risk through a variety of methods, including shipping
ferrous scrap metal exports under letters of credit, collection of deposits prior to shipment for certain nonferrous export customers,
establishment of credit limits for sales on open terms, credit insurance and designation of collateral and financial guarantees
securing advances, loans and other contractual receivables.
We ship nearly all ferrous bulk sales to foreign customers under contracts supported by letters of credit issued or confirmed by
banks it deems creditworthy. The letters of credit ensure payment by the customer. As we generally sell export recycled ferrous
metal under contracts or orders that generally provide for shipment within 30 to 60 days after the price is agreed, our customers
typically do not have difficulty obtaining letters of credit from their banks in periods of rising ferrous prices, as the value of the
letters of credit are collateralized by the value of the inventory on the ship. However, in periods of significantly declining prices,
our customers may not be able to obtain letters of credit for the full sales value of the inventory to be shipped.
As of August 31, 2017 and 2016, 33% and 34%, respectively, of our trade accounts receivable balance were covered by letters of
credit. Of the remaining balance, 88% and 94% was less than 60 days past due as of August 31, 2017 and 2016, respectively.
Foreign Currency Exchange Rate Risk
We are exposed to foreign currency exchange rate risk, mainly associated with sales transactions and related accounts receivable
denominated in the U.S. Dollar by our Canadian subsidiary with a functional currency of the Canadian Dollar. In certain instances,
we use derivatives to manage some portion of this risk. As of August 31, 2017, we did not have any derivative contracts.
50 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Management’s Annual Report on Internal Control Over Financial Reporting
Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting,
as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company’s internal
control over financial reporting is a process designed by, or under the supervision of, the Company’s principal executive and
principal financial officers and effected by the Company’s Board of Directors, management and other personnel to provide
reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes
in accordance with generally accepted accounting principles.
The Company’s internal control over financial reporting includes policies and procedures that relate to the maintenance of records
that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of assets of the Company; provide reasonable
assurance that transactions are recorded as necessary to permit the preparation of the Company’s consolidated financial statements
in accordance with generally accepted accounting principles and that the receipts and expenditures of the Company are being
made only in accordance with authorization of the Company’s management and directors; and provide reasonable assurance
regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have
a material effect on the Company’s consolidated financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projection
of any evaluation of effectiveness to future periods is subject to the risk that controls may become inadequate because of changes
in conditions or that the degree of compliance with the policies and procedures may deteriorate.
Management of the Company assessed the effectiveness of the Company’s internal control over financial reporting using the
criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of
the Treadway Commission (COSO). Based on its assessment, management determined that the Company’s internal control over
financial reporting was effective as of August 31, 2017.
PricewaterhouseCoopers LLP, the independent registered public accounting firm that audited the Company’s consolidated financial
statements included in this Annual Report, also audited the effectiveness of the Company’s internal control over financial reporting
as of August 31, 2017, as stated in their report included herein.
Tamara L. Lundgren
President and Chief Executive Officer
Richard D. Peach
Senior Vice President, Chief Financial Officer and Chief of
Corporate Operations
October 24, 2017
October 24, 2017
51 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Shareholders of Schnitzer Steel Industries, Inc.:
In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of operations, comprehensive
income (loss), equity and cash flows present fairly, in all material respects, the financial position of Schnitzer Steel Industries,
Inc. and its subsidiaries as of August 31, 2017 and 2016, and the results of their operations and their cash flows for each of the
three years in the period ended August 31, 2017 in conformity with accounting principles generally accepted in the United States
of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents
fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial
statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting
as of August 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee
of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial
statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment
of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on
Internal Control Over Financial Reporting. Our responsibility is to express opinions on these financial statements, on the financial
statement schedule, and on the Company's internal control over financial reporting based on our integrated audits. We conducted
our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards
require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of
material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our
audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the
financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the
overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding
of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design
and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures
as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability
of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted
accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain
to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets
of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial
statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are
being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable
assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that
could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also,
projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because
of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ PricewaterhouseCoopers LLP
PricewaterhouseCoopers LLP
Portland, Oregon
October 24, 2017
52 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
CONSOLIDATED BALANCE SHEETS
(in thousands)
Assets
Current assets:
Cash and cash equivalents
Accounts receivable, net
Inventories
Refundable income taxes
Prepaid expenses and other current assets
Total current assets
Property, plant and equipment, net
Investments in joint ventures
Goodwill
Intangibles, net
Other assets
Total assets
Current liabilities:
Liabilities and Equity
Short-term borrowings
Accounts payable
Accrued payroll and related liabilities
Environmental liabilities
Accrued income taxes
Other accrued liabilities
Total current liabilities
Deferred income taxes
Long-term debt, net of current maturities
Environmental liabilities, net of current portion
Other long-term liabilities
Total liabilities
Commitments and contingencies (Note 9)
Schnitzer Steel Industries, Inc. (“SSI”) shareholders’ equity:
Preferred stock – 20,000 shares $1.00 par value authorized, none issued
Class A common stock – 75,000 shares $1.00 par value authorized,
26,859 and 26,482 shares issued and outstanding
Class B common stock – 25,000 shares $1.00 par value authorized,
200 and 306 shares issued and outstanding
Additional paid-in capital
Retained earnings
Accumulated other comprehensive loss
Total SSI shareholders’ equity
Noncontrolling interests
Total equity
Total liabilities and equity
See Notes to the Consolidated Financial Statements.
53 / Schnitzer Steel Industries, Inc. Form 10-K 2017
August 31,
2017
2016
$
$
$
7,287
138,998
166,942
2,366
22,357
337,950
390,629
11,204
167,835
4,424
21,713
933,755
721
94,674
41,593
2,007
9
37,256
176,260
19,147
144,403
46,391
10,061
396,262
26,819
113,952
132,972
1,254
24,809
299,806
392,820
13,616
166,847
4,931
13,409
891,429
8,374
58,439
29,116
1,967
—
35,758
133,654
16,682
184,144
44,383
11,134
389,997
—
—
26,859
26,482
200
38,050
503,770
(35,293)
533,586
3,907
537,493
933,755
$
306
30,948
480,100
(40,115)
497,721
3,711
501,432
891,429
$
$
$
$
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except per share amounts)
Revenues
Operating expense:
Cost of goods sold
Selling, general and administrative
(Income) from joint ventures
Goodwill impairment charges
Other asset impairment charges (recoveries), net
Restructuring charges and other exit-related activities
Operating income (loss)
Interest expense
Other income, net
Income (loss) from continuing operations before income taxes
Income tax (expense) benefit
Income (loss) from continuing operations
Loss from discontinued operations, net of tax
Net income (loss)
Net income attributable to noncontrolling interests
Net income (loss) attributable to SSI
Net income (loss) per share attributable to SSI:
Basic:
Income (loss) per share from continuing operations attributable to SSI
Loss per share from discontinued operations attributable to SSI
Net income (loss) per share attributable to SSI(1)
Diluted:
Income (loss) per share from continuing operations attributable to SSI
Loss per share from discontinued operations attributable to SSI
Net income (loss) per share attributable to SSI(1)
Weighted average number of common shares:
Basic
Diluted
Dividends declared per common share
____________________________
(1) May not foot due to rounding.
Year Ended August 31,
2016
2015
2017
$ 1,687,591
$ 1,352,543
$ 1,915,399
1,464,508
1,175,988
1,742,678
171,570
(3,674)
—
(717)
(109)
56,013
(8,081)
758
48,690
(1,322)
47,368
(390)
46,978
(2,467)
44,511
1.63
(0.01)
1.62
1.60
(0.01)
1.58
$
$
$
$
$
148,908
(819)
8,845
20,682
6,781
(7,842)
(8,889)
1,226
(15,505)
(735)
(16,240)
(1,348)
(17,588)
(1,821)
(19,409) $
170,592
(1,490)
141,021
45,119
13,008
(195,529)
(9,191)
4,256
(200,464)
12,615
(187,849)
(7,227)
(195,076)
(1,933)
(197,009)
(0.66) $
(0.05)
(0.71) $
(0.66) $
(0.05)
(0.71) $
(7.03)
(0.27)
(7.29)
(7.03)
(0.27)
(7.29)
27,537
28,141
27,229
27,229
0.750
$
0.750
$
27,010
27,010
0.750
$
$
$
$
$
$
See Notes to the Consolidated Financial Statements.
54 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
(in thousands)
Net income (loss)
Other comprehensive income (loss), net of tax:
Foreign currency translation adjustments
Cash flow hedges, net
Pension obligations, net
Total other comprehensive income (loss), net of tax
Comprehensive income (loss)
Less comprehensive income attributable to noncontrolling interests
Comprehensive income (loss) attributable to SSI
$
$
2017
Year Ended August 31,
2016
(17,588) $ (195,076)
2015
$
46,978
2,711
—
2,111
4,822
51,800
(2,467)
49,333
$
(530)
(23,346)
(298)
240
(1,303)
(2,237)
(1,593)
(25,881)
(19,181)
(220,957)
(1,933)
(1,821)
(21,002) $ (222,890)
See Notes to the Consolidated Financial Statements.
55 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF EQUITY
(in thousands)
Balance as of August 31, 2014
Net income (loss)
Other comprehensive loss, net of tax
Distributions to noncontrolling interests
Share repurchases
Restricted stock withheld for taxes
Issuance of restricted stock
Share-based compensation expense
Cash dividends
Balance as of August 31, 2015
Net income (loss)
Other comprehensive loss, net of tax
Distributions to noncontrolling interests
Share repurchases
Restricted stock withheld for taxes
Issuance of restricted stock
Share-based compensation expense
Cash dividends
Net income
Other comprehensive income, net of tax
Distributions to noncontrolling interests
Conversion of common stock
Restricted stock withheld for taxes
Issuance of restricted stock
Share-based compensation expense
Cash dividends
Balance as of August 31, 2017
Balance as of August 31, 2016
26,482
26,482
Common Stock
Class A
Class B
Shares
Amount
Shares
Amount
Additional
Paid-in
Capital
Retained
Earnings
Accumulated
Other
Comprehensive
Loss
Total SSI
Shareholders’
Equity
Noncontrolling
Interests
Total
Equity
26,384
$ 26,384
306
$
306
$
19,164
$
737,571
$
(12,641) $
770,784
$
5,193
$
775,977
—
—
—
(68)
(92)
250
—
—
—
—
—
(68)
(92)
250
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(1,279)
(1,905)
(250)
10,481
(197,009)
—
—
—
—
—
—
—
(20,496)
26,474
26,474
306
306
26,211
520,066
—
—
—
(203)
(132)
343
—
—
—
—
—
(203)
(132)
343
—
—
—
—
—
106
(148)
419
—
—
—
—
—
106
(148)
419
—
—
—
—
—
—
—
—
—
—
306
—
—
—
—
—
—
—
—
—
—
—
306
—
—
—
(106)
(106)
—
—
—
—
—
—
—
—
—
—
—
(3,276)
(2,081)
(343)
10,437
(19,409)
—
—
—
—
—
—
—
(20,557)
30,948
—
—
—
—
(3,326)
(419)
10,847
480,100
44,511
—
—
—
—
—
—
—
(20,841)
—
(25,881)
(197,009)
(25,881)
—
—
—
—
—
—
(38,522)
—
(1,593)
—
—
—
—
—
—
(40,115)
—
4,822
—
—
—
—
—
—
—
(1,347)
(1,997)
—
10,481
(20,496)
534,535
(19,409)
(1,593)
—
(3,479)
(2,213)
—
10,437
(20,557)
497,721
44,511
4,822
—
—
(3,474)
—
10,847
(20,841)
1,933
—
(3,110)
—
—
—
—
—
4,016
1,821
—
(2,126)
—
—
—
—
—
3,711
2,467
—
(2,271)
—
—
—
—
—
(195,076)
(25,881)
(3,110)
(1,347)
(1,997)
—
10,481
(20,496)
538,551
(17,588)
(1,593)
(2,126)
(3,479)
(2,213)
—
10,437
(20,557)
501,432
46,978
4,822
(2,271)
—
(3,474)
—
10,847
(20,841)
26,859
$ 26,859
200
$
200
$
38,050
$
503,770
$
(35,293) $
533,586
$
3,907
$
537,493
See Notes to the Consolidated Financial Statements.
56 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands)
Cash flows from operating activities:
Net income (loss)
Adjustments to reconcile net income (loss) to cash provided by operating activities:
Goodwill impairment charges
Other asset impairment charges (recoveries), net
Exit-related (gains), asset impairments and accelerated depreciation, net
Depreciation and amortization
Inventory write-downs
Deferred income taxes
Undistributed equity in earnings of joint ventures
Share-based compensation expense
Loss (gain) on the disposal of assets
Unrealized foreign exchange (gain) loss, net
Bad debt expense (recoveries), net
Write-off of debt issuance costs
Excess tax benefit from share-based payment arrangements
Changes in assets and liabilities, net of acquisitions:
Accounts receivable
Inventories
Income taxes
Prepaid expenses and other current assets
Other long-term assets
Accounts payable
Accrued payroll and related liabilities
Other accrued liabilities
Environmental liabilities
Other long-term liabilities
Distributed equity in earnings of joint ventures
Net cash provided by operating activities
Cash flows from investing activities:
Capital expenditures
Purchase of cost method investment
Acquisitions, net of cash acquired
Joint venture receipts (payments), net
Proceeds from sale of assets
Net cash used in investing activities
Cash flows from financing activities:
Borrowings from long-term debt
Repayment of long-term debt
Proceeds from line of credit
Repayment of line of credit
Payment of debt issuance costs
Repurchase of Class A common stock
Taxes paid related to net share settlement of share-based payment arrangements
Excess tax benefit from share-based payment arrangements
Distributions to noncontrolling interests
Contingent consideration paid relating to business acquisitions
Dividends paid
Net cash used in financing activities
Effect of exchange rate changes on cash
Net increase (decrease) in cash and cash equivalents
Cash and cash equivalents as of beginning of year
Cash and cash equivalents as of end of year
$
Year Ended August 31,
2016
2015
2017
$
46,978
$
(17,588) $
(195,076)
—
(717)
(407)
49,840
—
2,278
(3,674)
10,847
448
361
126
—
—
(36,195)
(22,207)
(1,086)
(1,704)
537
33,062
12,389
5,073
1,884
(1,101)
3,638
100,370
(44,940)
(6,017)
—
405
5,158
(45,394)
433,336
(481,757)
—
—
(112)
—
(3,474)
—
(2,271)
—
(20,396)
(74,674)
166
(19,532)
26,819
7,287
8,845
20,682
1,790
54,630
710
507
(819)
10,437
(465)
(109)
131
768
—
(10,693)
27,504
5,861
(1,864)
266
(763)
3,633
(4,362)
(451)
30
560
99,240
(34,571)
—
—
(11)
4,106
(30,476)
152,311
(187,951)
135,500
(135,500)
(1,011)
(3,479)
(2,213)
—
(2,126)
—
(20,444)
(64,913)
213
4,064
22,755
26,819
$
$
141,021
45,119
6,502
67,936
3,031
(1,988)
(1,490)
10,481
(2,875)
(1,909)
(264)
—
(343)
55,600
69,256
(5,846)
2,403
1,064
(35,638)
(6,330)
(2,710)
(702)
(3,384)
770
144,628
(32,297)
—
(150)
(1)
4,270
(28,178)
140,536
(231,103)
266,500
(266,500)
(978)
(1,347)
(1,997)
343
(3,110)
(759)
(20,336)
(118,751)
(616)
(2,917)
25,672
22,755
57 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SUPPLEMENTAL DISCLOSURES:
Cash paid (received) during the year for:
Interest
Income taxes paid (refunds received), net
Schedule of noncash investing and financing transactions:
Purchases of property, plant and equipment included in current liabilities
Year Ended August 31,
2016
2015
2017
$
$
$
7,016
148
11,082
$
$
$
6,077
$
(5,691) $
7,138
(1,866)
8,268
$
6,086
See Notes to the Consolidated Financial Statements.
58 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Note 1 – Nature of Operations
Founded in 1906, Schnitzer Steel Industries, Inc. (the “Company”), an Oregon corporation, is one of North America’s largest
recyclers of ferrous and nonferrous scrap metal, including end-of-life vehicles, and a manufacturer of finished steel products.
Prior to the fourth quarter of fiscal 2017, the Company's internal organizational and reporting structure supported two operating
and reportable segments: the Auto and Metals Recycling ("AMR") business and the Steel Manufacturing Business ("SMB"). In
the fourth quarter of fiscal 2017, in accordance with its plan announced in June 2017, the Company modified its internal
organizational and reporting structure to combine its steel manufacturing operations, which had been reported as the SMB segment,
with its Oregon metals recycling operations, which had been reported within the AMR segment, forming a new division named
Cascade Steel and Scrap ("CSS"). This resulted in a realignment of how the Chief Executive Officer, who is considered the
Company's chief operating decision maker, reviews performance and makes decisions on resource allocation. The Company began
reporting on this new segment structure in the fourth quarter of fiscal 2017 as reflected in this Annual Report on Form 10-K. The
segment data for the comparable periods presented has been recast to conform to the current period presentation for all activities
of the reorganized segments. Recasting this historical information did not have an impact on the Company's consolidated financial
performance for any of the periods presented.
AMR buys and processes ferrous and nonferrous scrap metal for sale to foreign and domestic steel producers or their representatives
and procures salvaged vehicles and sells serviceable used auto parts from these vehicles through a network of self-service auto
parts stores. These auto parts stores also supply the Company's shredding facilities with autobodies that are processed into saleable
recycled scrap metal. CSS operates a steel mini-mill that produces a range of finished steel long products using recycled scrap
metal and other raw materials. CSS's steel mill obtains substantially all of its scrap metal raw material requirements from its
integrated metals recycling and joint venture operations.
As of August 31, 2017, all of the Company’s facilities were located in the United States ("U.S.") and its territories and Canada.
Note 2 – Summary of Significant Accounting Policies
Principles of Consolidation
The Consolidated Financial Statements include the accounts of the Company and its majority-owned and wholly-owned
subsidiaries. The equity method of accounting is used for investments in joint ventures over which the Company has significant
influence but does not have effective control. The cost method of accounting is used for investments in entities over which the
Company is not able to exercise significant influence. All significant intercompany account balances, transactions, profits and
losses have been eliminated. All transactions and relationships with potential variable interest entities are evaluated to determine
whether the Company is the primary beneficiary of the entities, therefore requiring consolidation. The Company does not have
any variable interest entities requiring consolidation.
Discontinued Operations
The results of discontinued operations are presented separately, net of tax, from the results of ongoing operations for all periods
presented. The expenses included in the results of discontinued operations are the direct operating expenses incurred by the disposed
components that may be reasonably segregated from the costs of the ongoing operations of the Company. Asset impairments
related to the disposed components are also included in the results of discontinued operations. See Note 8 - Discontinued Operations
and the Asset Impairment Charges (Recoveries), net section of this Note for further detail.
Cash and Cash Equivalents
Cash and cash equivalents include short-term securities that are not restricted by third parties and have an original maturity date
of 90 days or less. Included in accounts payable are book overdrafts representing outstanding checks in excess of funds on deposit
of $21 million and $3 million as of August 31, 2017 and 2016, respectively.
59 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Accounts Receivable, net
Accounts receivable represent amounts primarily due from customers on product and other sales. These accounts receivable, which
are reduced by an allowance for doubtful accounts, are recorded at the invoiced amount and do not bear interest. The Company
evaluates the collectability of its accounts receivable based on a combination of factors, including whether sales were made pursuant
to letters of credit or credit insurance is in place. In cases where management is aware of circumstances that may impair a customer’s
ability to meet its financial obligations, management records a specific allowance against amounts due and reduces the receivable
to the amount the Company believes will be collected. For all other customers, the Company maintains an allowance that considers
the total receivables outstanding, historical collection rates and economic trends. Accounts are written off when all efforts to collect
have been exhausted. The allowance for doubtful accounts was $2 million as of August 31, 2017 and 2016.
Inventories
The Company’s inventories consist of processed and unprocessed scrap metal (ferrous, nonferrous, and nonferrous recovered joint
product arising from the manufacturing process), semi-finished steel products (billets), finished steel products (primarily rebar,
wire rod and merchant bar), used and salvaged vehicles, and supplies. Inventories are stated at the lower of cost or market. The
Company determines the cost of ferrous and nonferrous scrap metal inventories using the average cost method and capitalizes
substantially all direct processing costs and yard costs into inventory. The Company allocates material and production costs to
joint products using the gross margin method. AMR determines the cost of used and salvaged vehicle inventory at its auto parts
stores, which is reported within finished goods, based on the average price the Company pays for a vehicle and capitalizes the
vehicle cost and substantially all production costs into inventory. CSS determines the cost of its semi-finished and finished steel
product inventories based on average costs and capitalizes all direct and indirect costs of manufacturing into inventory. Indirect
costs of manufacturing include general plant costs, maintenance and yard costs. The Company determines the cost of its supplies
inventory using the average cost method and reduces the carrying value for losses due to obsolescence. The Company considers
estimated future selling prices when determining the estimated net realizable value of its inventory. As the Company generally
sells its export recycled ferrous metal under contracts that provide for shipment within 30 to 60 days after the price is agreed, it
utilizes the selling prices under committed contracts and sales orders for determining the estimated market price of quantities on
hand that will be shipped under these contracts and orders.
The Company performs periodic physical inventories to verify the quantity of inventory on hand. Due to the inherent nature of
the Company's scrap metal inventories, including variations in product density, holding period and production processes utilized
to manufacture the products, physical inventories will not necessarily detect all variances for scrap metal inventory such that
estimates of quantities are required. To mitigate this risk, the Company adjusts its ferrous physical inventories when the volume
of a commodity is low and a physical inventory count can more accurately estimate the remaining volume.
Property, Plant and Equipment, net
Property, plant and equipment are recorded at cost. Expenditures for major additions and improvements are capitalized, while
routine repair and maintenance costs are expensed as incurred. Interest related to the construction of qualifying assets is capitalized
as part of the construction costs and was not material to any of the periods presented. When assets are retired or sold, the related
cost and accumulated depreciation are removed from the accounts and resulting gains or losses are generally included in operating
expense. Gains and losses from sales of assets related to an exit activity are reported within restructuring charges and other exit-
related activities in the Consolidated Statements of Operations. Depreciation is recorded on a straight-line basis over the estimated
useful lives of the assets. Upon idling an asset, depreciation continues to be recorded. Leasehold improvements are amortized over
the shorter of their estimated useful lives or the remaining lease term.
As of August 31, 2017, the useful lives used for depreciation and amortization were as follows:
Machinery and equipment
Land improvements
Buildings and leasehold improvements
Office equipment
Enterprise Resource Planning (“ERP”) systems
Useful Life
(In Years)
3 to 40
3 to 35
5 to 40
3 to 20
6 to 17
60 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Other Assets
The Company’s other assets, exclusive of prepaid expenses, consist primarily of receivables from insurers, a cost method investment,
debt issuance costs, notes and other contractual receivables from suppliers, and assets held for sale. Other assets are reported within
either prepaid expenses and other current assets or other assets in the Consolidated Balance Sheets based on their expected use
either during or beyond the current operating cycle of one year from the reporting date.
Receivables from insurers represent the portion of insured losses expected to be recovered from the Company’s insurance carriers.
The receivable is recorded at an amount not to exceed the recorded loss and only if the terms of legally enforceable insurance
contracts support that the insurance recovery will not be disputed and is deemed collectible.
During fiscal 2017, the Company invested $6 million in a privately-held waste and recycling entity. The Company's influence
over the operating and financial policies of the entity is not significant and, thus, the investment is accounted for under the cost
method. Under the cost method, the investment is carried at cost and adjusted only for other-than-temporary impairments, certain
distributions, and additional investments. The investment is presented as part of AMR and reported within other assets in the
Consolidated Balance Sheets. The Company does not hold any other cost-method investments. As of August 31, 2017, the Company
had not identified any events or changes in circumstances that may have a significant adverse effect on the fair value of the
investment or indicators of other-than-temporary impairment.
Debt issuance costs consist primarily of costs incurred by the Company to enter into or modify its credit facilities. The Company
reports deferred debt issuance costs within other assets in the Consolidated Balance Sheets and amortizes them to interest expense
on a straight-line basis over the contractual term of the arrangement.
Notes and other contractual receivables from suppliers consist primarily of advances to entities in the business of extracting scrap
metal through demolition and other activities. Repayment of these advances is in either cash or scrap metal. The Company performs
periodic reviews of its notes and other contractual receivables from suppliers to identify credit risks and to assess the overall
collectability of the receivables, which typically involves consideration of the value of collateral in the form of scrap metal extracted
from demolition and construction projects. A note or other contractual receivable from a supplier is considered impaired when,
based on current information and events, it is probable that the Company will be unable to collect all amounts due in accordance
with the contractual terms of the agreement. Once a note or other contractual receivable from a supplier has been identified as
impaired, it is measured based on the present value of payments expected to be received, discounted at the receivable’s contractual
interest rate, or for arrangements that are solely dependent on collateral for repayment, the estimated fair value of the collateral
less estimated costs to sell. If the carrying value of the receivable exceeds its recoverable amount, an impairment is recorded for
the difference.
An asset is classified as held for sale upon meeting criteria specified in the accounting standards. An asset classified as held for
sale is measured at the lower of its carrying amount or fair value less cost to sell with no further adjustments for depreciation. An
impairment loss is recognized for any initial or subsequent write-down of the asset to its fair value less cost to sell. The Company
generally determines fair value using Level 3 inputs under the fair value hierarchy consisting of information provided by brokers
and other external sources along with management’s own assumptions. See the Asset Impairment Charges (Recoveries), net section
of this Note below for tabular presentation of impairment charges recorded by the Company on assets held for sale during the
periods presented. In fiscal 2017, the Company sold equipment assets that had been classified as held for sale prior to being fully
impaired in fiscal 2015. The Company recorded a gain on the sale of $1 million in fiscal 2017, which is reported within other asset
impairment charges (recoveries), net in the Consolidated Statements of Operations. The Company did not have any assets held
for sale as of August 31, 2017. As of August 31, 2016, the Company reported less than $1 million of assets held for sale within
prepaid expenses and other current assets in the Consolidated Balance Sheets.
61 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Long-Lived Assets
The Company tests long-lived tangible and intangible assets for impairment at the asset group level, which is determined based
on the lowest level for which identifiable cash flows are largely independent of the cash flows of other groups of assets and
liabilities. For the Company's metals recycling operations reported within AMR, an asset group is generally comprised of the
regional shredding and export operation along with surrounding feeder yards. For regions with no shredding and export operations,
each metals recycling yard is an asset group. For the Company's auto parts operations, generally each auto parts store is an asset
group. The combined steel manufacturing and metals recycling operations within CSS are a single asset group. Prior to their
combination into CSS in the fourth quarter of fiscal 2017, the Company's steel manufacturing operations and Oregon metals
recycling operations were distinct asset groups. The Company tests its asset groups for impairment when certain triggering events
or changes in circumstances indicate that the carrying value of the asset group may be impaired. If the carrying value of the asset
group is not recoverable because it exceeds the Company’s estimate of future undiscounted cash flows from the use and eventual
disposition of the asset group, an impairment loss is recognized by the amount the carrying value exceeds its fair value, if any.
The impairment loss is allocated to the long-lived assets of the group on a pro rata basis using the relative carrying amounts of
those assets, except that the loss allocated to an individual long-lived asset of the group shall not reduce the carrying amount of
that asset below its fair value. Fair value is determined primarily using the cost and market approaches.
During fiscal 2016 and 2015, the Company recorded impairment charges on long-lived asset groups associated with certain regional
metals recycling operations and retail auto parts store locations.
With respect to individual long-lived assets, changes in circumstances may merit a change in the estimated useful lives or salvage
values of the assets, which are accounted for prospectively in the period of change. For such assets, the useful life is shortened
based on the Company's current plans to dispose of or abandon the asset before the end of its original useful life and depreciation
is accelerated beginning when that determination is made. During fiscal 2017, the Company recognized accelerated depreciation
primarily due to shortening the useful lives of idled and decommissioned machinery and equipment assets. During fiscal 2016
and 2015, the Company recognized accelerated depreciation due to shortened useful lives in connection with site closures and
idled equipment.
See the Asset Impairment Charges (Recoveries), net section of this Note for tabular presentation of long-lived asset impairment
charges and accelerated depreciation. Long-lived asset impairment charges and accelerated depreciation are reported in the
Consolidated Statements of Operations within (1) other asset impairment charges (recoveries), net; (2) restructuring charges and
other exit-related activities if related to a site closure not qualifying for discontinued operations reporting; or (3) loss from
discontinued operations, if related to a component of the Company qualifying for discontinued operations reporting.
Investments in Joint Ventures
As of August 31, 2017, the Company had four 50%-owned joint venture interests which were accounted for under the equity
method of accounting. Three of the joint venture interests are presented as part of AMR operations, and one interest is presented
as part of CSS operations. The joint ventures sell recycled metal to AMR and to CSS at prices that approximate local market rates,
which produces intercompany profit. This intercompany profit is eliminated while the products remain in inventory and is not
recognized until the finished products are sold to third parties. As of August 31, 2017, the Company’s investments in equity method
joint ventures have generated $9 million in cumulative undistributed earnings.
A loss in value of an investment in a joint venture is recognized when the decline is other than temporary. Management considers
all available evidence to evaluate the realizable value of its investments including the length of time and the extent to which the
fair value has been less than cost, the financial condition and near-term prospects of the joint venture business, and the Company’s
intent and ability to retain the investment for a period of time sufficient to allow for any anticipated recovery in fair value. Once
management determines that an other-than-temporary impairment exists, the investment is written down to its fair value, which
establishes a new cost basis. The Company determines fair value using Level 3 inputs under the fair value hierarchy using an
income approach based on a discounted cash flow analysis. During fiscal 2017 and 2016, the Company recorded impairment
charges of $1 million and $2 million, respectively, related to its investments in joint ventures, which are reported within other
asset impairment charges (recoveries), net in the Consolidated Statements of Operations.
During fiscal 2017, one of the Company's joint venture interests sold real estate resulting in recognition of a $6 million gain by
the joint venture, $3 million of which is attributable to the Company's investment. The Company's share of the gain is reported
within (income) loss from joint ventures in the Consolidated Statements of Operations. Also during fiscal 2017, the Company sold
one of its 50% joint venture interests presented as part of CSS operations, resulting in recognition of a $1 million gain on the sale.
The gain represents a recovery of impairments recorded against the investment in prior years and is reported within other asset
impairment charges (recoveries), net.
62 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
See Note 17 - Related Party Transactions for further detail on transactions with joint ventures.
Asset Impairment Charges (Recoveries), net
The following asset impairment charges and subsequent recoveries, excluding goodwill impairment charges discussed below in
this Note, were recorded in the Consolidated Statements of Operations (in thousands):
Reported within other asset impairment charges (recoveries), net:
Auto and Metals Recycling
Long-lived assets
Accelerated depreciation
Investments in joint ventures
Assets held for sale
Other assets
Total Auto and Metals Recycling
Cascade Steel and Scrap
Accelerated depreciation
Investments in joint ventures
Supplies inventory
Total Cascade Steel and Scrap
Corporate - Other assets
Reported within restructuring charges and other exit-related activities:
Long-lived assets
Accelerated depreciation
Supplies inventory
Other assets
Exit-related gains
Reported within discontinued operations:
Long-lived assets
Accelerated depreciation
Total
Goodwill and Other Intangible Assets, net
Year Ended August 31,
2017
2016
2015
$
— $
—
860
(1,044)
—
(184)
401
(934)
—
(533)
—
(717)
—
96
—
62
(565)
(407)
—
—
—
(1,124) $
$
7,336
$
41,676
6,208
—
1,659
1,208
16,411
—
1,968
2,224
4,192
79
20,682
468
630
1,047
35
(1,337)
843
673
274
947
—
—
2,558
140
44,374
—
—
—
—
745
45,119
—
3,836
—
—
—
3,836
2,666
—
2,666
22,472
$
51,621
Goodwill represents the excess of the purchase price over the net amount of identifiable assets acquired and liabilities assumed
in a business combination measured at fair value. The Company evaluates goodwill for impairment annually on July 1 and upon
the occurrence of certain triggering events or substantive changes in circumstances that indicate that the fair value of goodwill
may be impaired. Impairment of goodwill is tested at the reporting unit level. A reporting unit is an operating segment or one level
below an operating segment (referred to as a component). A component of an operating segment is required to be identified as a
reporting unit if the component is a business for which discrete financial information is available and segment management regularly
reviews its operating results.
63 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
When testing goodwill for impairment, the Company has the option to first assess qualitative factors to determine whether the
existence of events or circumstances leads to a determination that it is more likely than not that the estimated fair value of a
reporting unit is less than its carrying amount. If the Company elects to perform a qualitative assessment and determines that an
impairment is more likely than not, the Company is then required to perform the quantitative impairment test, otherwise no further
analysis is required. The Company also may elect not to perform the qualitative assessment and, instead, proceed directly to the
quantitative impairment test.
Under the accounting guidance in effect for the Company prior to the third quarter of fiscal 2017, in the first step of the two-step
quantitative impairment test, the fair value of a reporting unit was compared to its carrying value. If the carrying value of a reporting
unit exceeded its fair value, the second step of the impairment test was performed for purposes of measuring the impairment. In
the second step, the fair value of the reporting unit was allocated to all of the assets and liabilities of the reporting unit to determine
an implied goodwill value. If the carrying amount of the reporting unit’s goodwill exceeded the implied fair value of goodwill, an
impairment loss was recognized in an amount equal to that excess.
As of the beginning of the third quarter of fiscal 2017, the Company adopted an accounting standard update that eliminates the
second step of the two-step goodwill impairment test with no impact to the Consolidated Financial Statements. Under the revised
guidance, the Company applies a one-step quantitative test and records the amount of goodwill impairment as the excess of a
reporting unit's carrying amount over its fair value, not to exceed the total amount of goodwill allocated to that reporting unit. The
new guidance does not amend the optional qualitative assessment of goodwill impairment.
When the Company is required to perform a quantitative goodwill impairment test, it estimates the fair value of its reporting units
using an income approach based on the present value of expected future cash flows, including terminal value, utilizing a market-
based weighted average cost of capital (“WACC”) determined separately for each reporting unit. The determination of fair value
involves the use of significant estimates and assumptions, including revenue growth rates driven by future commodity prices and
volume expectations, operating margins, capital expenditures, working capital requirements, tax rates, terminal growth rates,
discount rates, benefits associated with a taxable transaction and synergistic benefits available to market participants. In addition,
to corroborate the reporting units’ valuation, the Company uses a market approach based on earnings multiple data and a
reconciliation of the Company’s estimate of the aggregate fair value of the reporting units to the Company’s market capitalization,
including consideration of a control premium. See Note 6 - Goodwill and Other Intangible Assets, net for further detail including
the recognition of goodwill impairment charges of $9 million and $141 million during fiscal 2016 and 2015, respectively.
The Company tests indefinite-lived intangible assets for impairment by first assessing qualitative factors to determine whether it
is necessary to perform a quantitative impairment test. If the Company believes, as a result of its qualitative assessment, that it is
more likely than not that the fair value of the indefinite-lived intangible asset is less than its carrying amount, the quantitative
impairment test is required. Otherwise, no further testing is required. The Company did not record impairment charges on indefinite-
lived intangible assets in any of the periods presented.
Restructuring Charges
Restructuring charges consist of severance, contract termination and other restructuring-related costs. A liability for severance
costs is typically recognized when the plan of termination has been communicated to the affected employees and is measured at
its fair value at the communication date. Contract termination costs consist primarily of costs that will continue to be incurred
under operating leases for their remaining terms without economic benefit to the Company. A liability for contract termination
costs is recognized at the date the Company ceases using the rights conveyed by the lease contract and is measured at its fair value,
which is determined based on the remaining contractual lease rentals reduced by estimated sublease rentals. A liability for other
restructuring-related costs is measured at its fair value in the period in which the liability is incurred. See Note 10 - Restructuring
Charges and Other Exit-Related Activities for further detail.
Accrued Workers’ Compensation Costs
The Company is self-insured for the significant majority of workers’ compensation claims with exposure limited by various stop-
loss insurance policies. The Company estimates the costs of workers’ compensation claims based on the nature of the injury
incurred and on guidelines established by the applicable state. An accrual is recorded based upon the amount of unpaid claims as
of the balance sheet date. Accrued amounts recorded for individual claims are reviewed periodically as treatment progresses and
adjusted to reflect additional information that becomes available. The estimated cost of claims incurred but not reported is included
in the accrual. The Company accrued $10 million for the estimated cost of unpaid workers’ compensation claims as of August 31,
2017 and 2016, which are included in other accrued liabilities in the Consolidated Balance Sheets.
64 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Environmental Liabilities
The Company estimates future costs for known environmental remediation requirements and accrues for them on an undiscounted
basis when it is probable that the Company has incurred a liability and the related costs can be reasonably estimated but the timing
of incurring the estimated costs is unknown. The Company considers various factors when estimating its environmental liabilities.
Adjustments to the liabilities are recorded to selling, general and administrative expense and made when additional information
becomes available that affects the estimated costs to study or remediate any environmental issues or when expenditures are made
for which liabilities were established. Legal costs incurred in connection with environmental contingencies are expensed as incurred.
When only a wide range of estimated amounts can be reasonably established and no other amount within the range is a better
estimate than another, the low end of the range is recorded in the financial statements. In a number of cases, it is possible that the
Company may receive reimbursement through insurance or from other potentially responsible parties for a site. In these situations,
recoveries of environmental remediation costs from other parties are recognized when the claim for recovery is either realized or
realizable. The amounts recorded for environmental liabilities are reviewed periodically as site assessment and remediation
progresses at individual sites and adjusted to reflect additional information that becomes available. Due to evolving remediation
technology, changing regulations, possible third party contributions, the subjective nature of the assumptions used and other factors,
amounts accrued could vary significantly from amounts paid. See “Contingencies – Environmental” in Note 9 – Commitments
and Contingencies for further detail.
Loss Contingencies
The Company is subject to certain legal proceedings and contingencies in addition to those related to environmental liabilities
discussed above in this Note, the outcomes of which are subject to significant uncertainty. The Company accrues for estimated
losses if it is probable that a liability has been incurred and the amount of the loss can be reasonably estimated. The Company uses
judgment and evaluates whether a loss contingency arising from litigation or an unasserted claim should be disclosed or recorded.
The outcome of legal proceedings and other contingencies is inherently uncertain and often difficult to estimate. As of August 31,
2017 and 2016, accruals for legal contingencies net of corresponding receivables from insurers were not material.
Financial Instruments
The Company’s financial instruments include cash and cash equivalents, accounts receivable, accounts payable, and debt. The
Company uses the market approach to value its financial assets and liabilities, determined using available market information.
The net carrying amounts of cash and cash equivalents, accounts receivable and accounts payable approximate fair value due to
the short-term nature of these instruments. For long-term debt, which is primarily at variable interest rates, fair value is estimated
using observable inputs (Level 2) and approximates its carrying value.
Fair Value Measurements
Fair value is measured using inputs from the three levels of the fair value hierarchy. Classification within the hierarchy is determined
based on the lowest level input that is significant to the fair value measurement. The three levels are described as follows:
• Level 1 – Unadjusted quoted prices in active markets for identical assets and liabilities.
• Level 2 – Inputs other than quoted prices included within Level 1 that are observable for the determination of the fair
value of the asset or liability, either directly or indirectly.
• Level 3 – Unobservable inputs that are significant to the determination of the fair value of the asset or liability.
When developing the fair value measurements, the Company uses quoted market prices whenever available or seeks to maximize
the use of observable inputs and minimize the use of unobservable inputs when quoted market prices are not available.
65 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Derivatives
The Company records derivative instruments in prepaid expenses and other current assets or other accrued liabilities in the
Consolidated Balance Sheets at fair value, and changes in the fair value are either recognized in other comprehensive income
(loss) in the Consolidated Statements of Comprehensive Income (Loss) or net income (loss) in the Consolidated Statements of
Operations, as applicable, depending on the nature of the underlying exposure, whether the derivative has been designated as a
hedge and, if designated as a hedge, the extent to which the hedge is effective. Amounts included in accumulated other
comprehensive loss are reclassified to earnings in the period in which earnings are impacted by the hedged items, in the period
that the hedged transaction is deemed no longer likely to occur, or in the period that the derivative is terminated. For cash flow
hedges, a formal assessment is made, both at the hedge’s inception and on an ongoing basis, to determine whether the derivatives
that are designated as hedging instruments have been highly effective in offsetting changes in the cash flows of hedged items and
whether those derivatives may be expected to remain highly effective in future periods. To the extent the hedge is determined to
be ineffective, the ineffective portion is immediately recognized in earnings. When available, quoted market prices or prices
obtained through external sources are used to measure a derivative instrument’s fair value. The fair value of these instruments is
a function of underlying forward commodity prices or foreign currency exchange rates, related volatility, counterparty
creditworthiness and duration of the contracts. Cash flows from derivatives are recognized in the Consolidated Statements of Cash
Flows in a manner consistent with the underlying transactions. See Note 12 - Derivative Financial Instruments for further detail.
Derivative contracts for commodities used in normal business operations that are settled by physical delivery, among other criteria,
are eligible for and may be designated as normal purchases and normal sales. Contracts that qualify as normal purchases or normal
sales are not marked-to-market. The Company does not use derivative instruments for trading or speculative purposes.
Foreign Currency Translation and Transactions
Assets and liabilities of the Company’s operations in Canada are translated into U.S. dollars at the period-end exchange rate,
revenues and expenses of these operations are translated into U.S. dollars at the average exchange rate for the period, and cash
flows of these operations are translated into U.S. dollars using the exchange rates in effect at the time of the cash flows. Translation
adjustments are not included in determining net income (loss) for the period, but are recorded in accumulated other comprehensive
loss, a separate component of shareholders’ equity. Foreign currency transaction gains and losses are generated from the effects
of exchange rate changes on transactions denominated in a currency other than the functional currency. Gains and losses on foreign
currency transactions are generally included in determining net income (loss) for the period. The Company reports these gains
and losses within other income, net in the Consolidated Statements of Operations. Net realized and unrealized foreign currency
transaction gains and losses were not material for fiscal years 2017, 2016 and 2015.
Common Stock
Each share of Class A and Class B common stock is entitled to one vote. Additionally, each share of Class B common stock may
be converted to one share of Class A common stock. As such, the Company reserves one share of Class A common stock for each
share of Class B common stock outstanding. There are currently no meaningful distinctions between the rights of holders of Class
A shares and Class B shares.
Share Repurchases
The Company accounts for the repurchase of stock at par value. All shares repurchased are deemed retired. Upon retirement of
the shares, the Company records the difference between the weighted average cost of such shares and the par value of the stock
as an adjustment to additional paid-in capital, with the excess recorded to retained earnings when additional paid-in capital is not
sufficient.
Revenue Recognition
The Company recognizes revenue when it has a contract or purchase order from a customer with a fixed or determinable price,
the title and risk of loss transfer to the buyer, and collectibility is reasonably assured. Title for both recycled scrap metal and
finished steel products transfers based on contract terms. Nearly all of the Company’s ferrous export sales are made with letters
of credit, reducing credit risk. However, ferrous domestic sales, nonferrous sales and sales of finished steel products are generally
made on open account. Nonferrous export sales typically require a deposit prior to shipment. All sales made on open account are
evaluated for collectability prior to revenue recognition. Additionally, the Company recognizes revenue on partially loaded
shipments of ferrous recycled scrap metal when contractual terms support revenue recognition based on transfer of title and risk
of loss. The Company reports revenue net of the payments made to the supplier of scrap metal when the supplier, and not the
Company, is responsible for fulfillment, including the acceptability of the products purchased by the customer. Retail auto parts
revenue is recognized when the customer pays for the part. Historically, there have been very few sales returns and adjustments
that impact the ultimate collection of revenues; therefore, no material provisions for returns have been made when sales are
66 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
recognized. The Company presents taxes assessed by governmental authorities collected from customers on a net basis. Therefore,
the taxes are excluded from revenues and are shown as a liability on the Consolidated Balance Sheets until remitted.
Freight Costs
The Company classifies shipping and handling costs billed to customers as revenue and the related costs incurred as a component
of cost of goods sold.
Advertising Costs
The Company expenses advertising costs when incurred. Advertising expense was $6 million in fiscal 2017, and $5 million in
each of fiscal 2016 and 2015.
Share-Based Compensation
The Company recognizes compensation cost relating to share-based payment transactions with employees and non-employee
directors over the vesting period, with the cost measured based on the grant-date fair value of the equity instruments issued, net
of an estimated forfeiture rate. See Note 14 – Share-Based Compensation for further detail.
Income Taxes
Income taxes are accounted for using the asset and liability method. This requires the recognition of taxes currently payable or
refundable and the recognition of deferred tax assets and liabilities for the future tax consequences of events that are recognized
in one reporting period on the Consolidated Financial Statements but in a different reporting period on the tax returns. Tax credits
are recognized as a reduction of income tax expense in the year the credit arises. Valuation allowances are recorded to reduce
deferred tax assets when it is more likely than not that a tax benefit will not be realized. Tax benefits arising from uncertain tax
positions are recognized when it is more likely than not that the position will be sustained upon examination by the relevant tax
authorities. The amount recognized in the financial statements is the largest amount of tax benefit that is greater than 50 percent
likely of being realized upon ultimate settlement with a taxing authority that has full knowledge of all relevant information. The
Company recognizes interest and penalties, if any, related to uncertain tax positions in income tax expense. See Note 15 – Income
Taxes for further detail.
Net Income (Loss) Per Share
Basic net income (loss) per share attributable to SSI is computed by dividing net income (loss) attributable to SSI by the weighted
average number of outstanding common shares during the periods presented including vested deferred stock units (“DSUs”) and
restricted stock units (“RSUs”) meeting certain criteria. Diluted net income (loss) per share attributable to SSI is computed by
dividing net income (loss) attributable to SSI by the weighted average number of common shares outstanding, assuming dilution.
Potentially dilutive common shares include the assumed exercise of stock options and assumed vesting of performance share,
DSU and RSU awards using the treasury stock method. Certain of the Company’s stock options and RSU and performance share
awards were excluded from the calculation of diluted net income (loss) per share attributable to SSI because they were antidilutive;
however, certain of these RSU and performance share awards could be dilutive in the future. Net income attributable to
noncontrolling interests is deducted from income (loss) from continuing operations to arrive at income (loss) from continuing
operations attributable to SSI for the purpose of calculating income (loss) per share from continuing operations attributable to SSI.
Loss per share from discontinued operations attributable to SSI is presented separately in the Consolidated Statements of Operations.
See Note 16 – Net Income (Loss) Per Share for further detail.
Use of Estimates
The preparation of the Company’s Consolidated Financial Statements in accordance with generally accepted accounting principles
in the United States of America (“U.S. GAAP”) requires management to make estimates and assumptions that affect the reported
amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the Consolidated Financial Statements
and reported amounts of revenue and expenses during the reporting period. Examples include revenue recognition; the allowance
for doubtful accounts; estimates of contingencies, including environmental liabilities and other legal liabilities; goodwill, long-
lived asset and indefinite-lived intangible asset valuation; valuation of equity method and cost method investments; valuation of
certain share-based awards; other asset valuation; inventory valuation; pension plan assumptions; and the assessment of the
valuation of deferred income taxes and income tax contingencies. Actual results may differ from estimated amounts.
67 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Concentration of Credit Risk
Financial instruments that potentially subject the Company to significant concentration of credit risk consist primarily of cash and
cash equivalents, accounts receivable, and notes and other contractual receivables from suppliers. The majority of cash and cash
equivalents is maintained with major financial institutions. Balances with these and certain other institutions exceeded the Federal
Deposit Insurance Corporation insured amount of $250,000 as of August 31, 2017. Concentration of credit risk with respect to
accounts receivable is limited because a large number of geographically diverse customers make up the Company’s customer base.
The Company controls credit risk through credit approvals, credit limits, credit insurance, letters of credit or other collateral, cash
deposits and monitoring procedures. The Company is exposed to a residual credit risk with respect to open letters of credit by
virtue of the possibility of the failure of a bank providing a letter of credit. The Company had $48 million and $40 million of open
letters of credit as of August 31, 2017 and 2016, respectively.
Note 3 – Recent Accounting Pronouncements
In May 2014, an accounting standard update was issued that clarifies the principles for recognizing revenue from contracts with
customers. The update will supersede the existing standard for recognizing revenue. Additional updates have been issued since
May 2014 amending aspects of the initial update and providing implementation guidance. The guidance is applicable to all contracts
with customers regardless of industry-specific or transaction-specific fact patterns. Further, the guidance requires improved
disclosures to help users of financial statements better understand the nature, amount, timing, and uncertainty of revenue that is
recognized. The standard is effective for the Company beginning in fiscal 2019, including interim periods within that fiscal year.
Upon becoming effective, an entity may adopt the standard either retrospectively to each prior reporting period presented, or
retrospectively with the cumulative effect of initially applying the guidance recognized at the date of initial application. The
Company is in the process of examining its current revenue streams and significant contracts with customers under the requirements
of the new standard and, based on the progress of this examination to date, does not believe the standard will have a material
impact on its financial position, net income or cash flows. The Company is currently examining certain scrap metal purchase and
sale arrangements to determine if it is the principal or the agent in the transaction under the new guidance, the outcome of which
could result in a different classification of the cost of scrap metal purchased compared to the Company's treatment under the
existing revenue standard. The Company is also analyzing the expanded disclosure requirements under the new standard, the
method of adoption, and potential changes to its accounting policies, processes, systems and internal controls that may be required
to support the new standard.
In January 2016, an accounting standard update was issued that amends certain aspects of the reporting model for financial
instruments. Most prominent among the amendments is the requirement for equity investments, with certain exceptions including
those accounted for under the equity method of accounting, to be measured at fair value with changes in fair value recognized in
net income. An entity may choose to measure equity investments that do not have readily determinable fair values, such as certain
cost method investments, at cost minus impairment, plus or minus changes resulting from observable price changes. The
amendments also require a qualitative assessment to identify impairment of equity investments without readily determinable fair
values. The standard is effective for the Company beginning in fiscal 2019, including interim periods within that fiscal year. The
Company is evaluating the impact of adopting this standard on its consolidated financial position, results of operations and cash
flows.
In February 2016, an accounting standard was issued that will supersede the existing lease standard and requiring a lessee to
recognize a lease liability and a lease asset on its balance sheet for all leases, including those classified as operating leases under
the existing lease standard. The update also expands the required quantitative and qualitative disclosures surrounding leases. This
standard is effective for the Company beginning in fiscal 2020, including interim periods within that fiscal year. This standard
will be applied using a modified retrospective transition approach for leases existing at, or entered into after, the beginning of the
earliest comparative period presented in the financial statements. The Company is in the process of identifying its population of
leases within the scope of the new accounting standard and documenting salient lease terms to support the initial and subsequent
measurement of lease liabilities and lease assets. The Company is evaluating the impact of adopting this standard on its financial
position, results of operations, cash flows and disclosures.
In March 2016, an accounting standard update was issued that amends several aspects of the accounting for share-based payments,
including accounting for income taxes, forfeitures and statutory tax withholding requirements, and classification within the
statement of cash flows. The standard is effective for the Company beginning in fiscal 2018, including interim periods within that
fiscal year. The Company does not expect adoption to have an immediate material impact on its consolidated financial position,
results of operations and cash flows.
In August 2016, an accounting standard update was issued that addresses how certain cash receipts and cash payments are presented
and classified in the statement of cash flows. Among the cash flow matters addressed in the update are payments for costs related
to debt prepayments or extinguishments, payments related to settlement of certain types of debt instruments, payments of contingent
68 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
consideration made after a business combination, proceeds from insurance claims and corporate-owned life insurance policies,
and distributions received from equity method investees, among others. The standard is effective for the Company beginning in
the first quarter of fiscal 2019, including interim periods within that fiscal year. Early adoption is permitted, including adoption
in an interim period. If an entity early adopts the amendments in an interim period, any adjustments should be reflected as of the
beginning of the fiscal year that includes that interim period, and all of the amendments must be adopted together in the same
period. The amendments will be applied using a retrospective transition method to each period presented, unless impracticable
for specific cash flow matters, in which case the amendments would be applied prospectively as of the earliest date practicable.
The Company is evaluating the impact of adopting this standard on its consolidated statement of cash flows.
In October 2016, an accounting standard update was issued that amends the existing guidance on the accounting for the income
tax effects of intra-entity transfers of assets other than inventory. Current accounting standards prohibit the recognition of current
and deferred income taxes for an intra-entity asset transfer until the asset has been sold to an outside party. The amendments in
the update require that entities recognize the income tax effects of an intra-entity transfer of an asset other than inventory when
the transfer occurs. The amendments do not change accounting standards for the pre-tax effects of an intra-entity asset transfer
under accounting standards applicable to consolidation, or for an intra-entity transfer of inventory. The standard is effective for
the Company beginning in fiscal 2019, including interim periods within that fiscal year. Early adoption is permitted in the first
interim period of a fiscal year. The amendments will be applied on a modified retrospective basis through a cumulative-effect
adjustment directly to retained earnings as of the beginning of the period of adoption. The Company is evaluating the impact of
adopting this standard on its consolidated financial position, results of operations and cash flows.
In March 2017, an accounting standard update was issued that modifies the presentation requirements for net periodic pension
cost and net periodic postretirement benefit cost within an entity's income statement. The amendments in the update require that
an employer report the service cost component in the same line item or items as other compensation costs arising from services
rendered by the pertinent employees during the period. The amendments also require the other components of net periodic pension
cost and net periodic postretirement benefit cost to be presented in the income statement separately from the service cost component
and outside a subtotal of income from operations. Additionally, only the service cost component is eligible for capitalization, when
applicable. The standard is effective for the Company beginning in fiscal 2019, including interim periods within that fiscal year.
Early adoption is permitted beginning with the first quarter of fiscal 2018. Aspects of the update affecting income statement
presentation must be applied retrospectively, while aspects affecting the capitalization of the service cost component in assets
must be applied prospectively on and after the effective date. The Company is evaluating the impact of adopting this standard on
its consolidated financial position, results of operations and cash flows.
Note 4 – Inventories
Inventories consisted of the following as of August 31 (in thousands):
Processed and unprocessed scrap metal
Semi-finished goods (billets)
Finished goods
Supplies
Inventories
2017
2016
88,441
$
3,243
40,462
34,796
49,061
8,320
40,646
34,945
166,942
$
132,972
$
$
69 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Note 5 – Property, Plant and Equipment, net
Property, plant and equipment, net consisted of the following as of August 31 (in thousands):
Machinery and equipment
Land and improvements
Buildings and leasehold improvements
Office equipment
ERP systems
Construction in progress
Property, plant and equipment, gross
Less: accumulated depreciation
Property, plant and equipment, net
2017
2016
$
$
683,364
260,854
111,077
48,517
17,884
25,427
1,147,123
(756,494)
390,629
$
$
659,641
245,266
104,121
49,924
17,735
31,098
1,107,785
(714,965)
392,820
Depreciation expense for property, plant and equipment, which includes amortization expense for assets under capital leases, was
$49 million, $53 million and $66 million for the years ended August 31, 2017, 2016 and 2015, respectively. Depreciation expense
of $1 million was reported within discontinued operations for the year ended August 31, 2015. No depreciation expense was
reported within discontinued operations for the years ended August 31, 2017 and 2016.
Note 6 – Goodwill and Other Intangible Assets, net
The Company evaluates goodwill for impairment annually on July 1 and upon the occurrence of certain triggering events or
substantive changes in circumstances that indicate that the fair value of goodwill may be impaired. In the second quarter of fiscal
2015, management identified the combination of a significant further weakening in market conditions at such time, continued
constrained supply of raw materials due to the lower price environment which negatively impacted volumes, the planned idling
or closure of certain production facilities and retail stores, the Company’s financial performance and a decline in the Company’s
market capitalization during the first half of fiscal 2015 as a triggering event requiring an interim impairment test of goodwill
allocated to its reporting units, which resulted in impairment of the remaining carrying amount of a reporting unit's goodwill
totaling $141 million. The impairment charge is reported within the results of AMR in this report.
In the second quarter of fiscal 2016, management identified the combination of sustained weak market conditions at such time,
including the adverse effects of lower commodity selling prices and the constraining impact of the lower price environment on
the supply of raw materials which negatively impacted volumes, the Company’s financial performance and a decline in the
Company’s market capitalization at such time as a triggering event requiring an interim impairment test of goodwill allocated to
its reporting units, which resulted in impairment of the entire carrying amount of goodwill allocated to a reporting unit within
AMR totaling $9 million.
In the fourth quarter of fiscal 2017, the Company performed the annual goodwill impairment test as of July 1, 2017. As of the
testing date, the balance of the Company's goodwill of $167 million was carried by a single reporting unit within AMR. The
Company elected to first assess qualitative factors to determine whether the existence of events or circumstances led to a
determination that it was more likely than not that the estimated fair value of the reporting unit was less than its carrying amount.
As a result of the qualitative assessment, the Company concluded that it was not more likely than not that the fair value of the
reporting unit was less than its carrying value as of the testing date and, therefore, no further impairment testing was required.
The gross changes in the carrying amount of goodwill by reportable segment for the years ended August 31, 2017 and 2016 were
as follows (in thousands):
Balance as of August 31, 2015
Foreign currency translation adjustment
Goodwill impairment charge
Balance as of August 31, 2016
Foreign currency translation adjustment
Balance as of August 31, 2017
$
AMR
175,676
16
(8,845)
166,847
988
$
167,835
Accumulated goodwill impairment charges were $471 million as of August 31, 2017 and 2016.
The following table presents the Company’s intangible assets as of August 31 (in thousands):
2017
2016
Gross
Carrying
Amount
Accumulated
Amortization
Net
Gross
Carrying
Amount
Accumulated
Amortization
Net
Covenants not to compete
$
6,094
$
(3,140) $
2,954
$
6,145
$
(2,791) $
3,354
Other intangible assets subject to
amortization(1)
Indefinite-lived intangibles(2)
Total
1,162
1,081
$
8,337
$
(773)
—
(3,913) $
389
1,081
1,162
1,081
4,424
$
8,388
$
(666)
—
(3,457) $
496
1,081
4,931
_____________________________
(1) Other intangible assets subject to amortization include leasehold interests, permits and licenses.
(2)
Indefinite-lived intangibles include trade names, permits and licenses, and real property options.
Total intangible asset amortization expense was $1 million, $1 million and $2 million for the years ended August 31, 2017, 2016
and 2015, respectively. Amortization expense of less than $1 million was reported within discontinued operations for the year
ended August 31, 2015. No amortization expense was reported within discontinued operations for the years ended August 31,
2017 and 2016. Impairments of intangible assets were immaterial for all periods presented.
The estimated amortization expense, based on current intangible asset balances, during the next five fiscal years and thereafter is
as follows (in thousands):
Years Ending August 31,
2018
2019
2020
2021
2022
Thereafter
Total
Note 7 – Debt
Estimated
Amortization
Expense
$
$
456
303
274
274
273
1,763
3,343
Debt consisted of the following as of August 31 (in thousands):
Bank revolving credit facilities, interest at LIBOR plus a spread
$
140,000
$
180,000
2017
2016
Tax-exempt economic development revenue bonds due January 2021, redeemed and
repaid in full in September 2016
Capital lease obligations due through February 2028
Other debt obligations
Total debt
Less current maturities
Debt, net of current maturities
—
4,418
706
145,124
(721)
144,403
$
$
7,700
4,053
765
192,518
(8,374)
184,144
The Company's senior secured revolving credit facilities, which provide for revolving loans of $335 million and C$15 million
mature in April 2021 pursuant to a credit agreement with Bank of America, N.A., as administrative agent, and other lenders party
thereto. Subject to the terms and conditions of the agreement, the Company may request that the commitments under the U.S.
credit facility be increased by an aggregate amount not exceeding $100 million if certain conditions are met including pre-approval
by the lenders and achievement of certain pro forma financial results. As of August 31, 2017 and 2016, borrowings outstanding
71 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
under the credit facilities were $140 million and $180 million, respectively. The weighted average interest rate on amounts
outstanding under the credit facilities was 3.48% and 3.01% as of August 31, 2017 and 2016, respectively.
Interest rates on outstanding indebtedness under the credit agreement are based, at the Company’s option, on either the London
Interbank Offered Rate ("LIBOR"), or the Canadian equivalent, plus a spread of between 1.75% and 2.75%, with the amount of
the spread based on a pricing grid tied to the Company’s leverage ratio but no less than 2.50% for the fiscal quarters ended May
31, 2016, August 31, 2016 and November 30, 2016, or the greater of the prime rate, the federal funds rate plus 0.50% or the daily
rate equal to one-month LIBOR plus 1.75%, in each case plus a spread of between zero and 1.00% based on a pricing grid tied to
the Company's leverage ratio. In addition, commitment fees are payable on the unused portion of the credit facilities at rates
between 0.20% and 0.40% based on a pricing grid tied to the Company’s leverage ratio.
The credit agreement contains certain customary covenants, including covenants that limit the ability of the Company and its
subsidiaries to enter into certain types of transactions. Financial covenants include covenants requiring maintenance of a minimum
fixed charge coverage ratio, a maximum leverage ratio and a minimum asset coverage ratio. The Company’s obligations under
the credit agreement are guaranteed by substantially all of its subsidiaries. The credit facilities and the related guarantees are
secured by senior first priority liens on certain of the Company's and its subsidiaries’ assets, including equipment, inventory and
accounts receivable.
As of August 31, 2016, the Company had $8 million of tax-exempt economic development revenue bonds outstanding with the
State of Oregon and scheduled to mature in January 2021. In August 2016, the Company exercised its option to redeem the bonds
prior to maturity. The Company repaid the bonds in full in September 2016. The obligation is reported as a current liability within
short-term borrowings as of August 31, 2016 on the Consolidated Balance Sheet, and the $8 million repayment is reported as a
cash outflow from financing activities for the fiscal year ended August 31, 2017 on the Consolidated Statement of Cash Flows.
Principal payments on long-term debt and capital lease obligations during the next five fiscal years and thereafter are as follows
(in thousands):
Year Ending August 31,
2018
2019
2020
2021
2022
Thereafter
Total
Amounts representing interest and executory costs
Total less interest
Long-Term
Debt
Capital
Lease
Obligations
Total
$
41
$
1,169
$
153
92
140,050
53
317
140,706
—
$
140,706
$
1,043
1,022
885
753
1,824
6,696
(2,278)
4,418
$
1,210
1,196
1,114
140,935
806
2,141
147,402
(2,278)
145,124
The Company maintains stand-by letters of credit to provide for certain obligations including workers’ compensation and
performance bonds. The Company had $10 million outstanding under these arrangements as of August 31, 2017 and $16 million
as of August 31, 2016.
The Company also had an unsecured, uncommitted $25 million credit line with Wells Fargo Bank, N.A. that expired on April 1,
2016.
Note 8 - Discontinued Operations
In fiscal 2015, the Company ceased operations at seven auto parts stores, six of which qualified for discontinued operations
reporting. The operations of the six qualifying stores had previously been reported within the AMR segment. In fiscal 2016 and
2015, the Company recorded impairment charges and accelerated depreciation of $1 million and $3 million , respectively, on the
long-lived assets of discontinued auto parts stores. Impaired assets in fiscal 2016 consisted primarily of capital lease assets associated
with the buildings on two leased properties.
72 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Operating results of discontinued operations were comprised of the following for the years ended August 31 (in thousands):
Revenues
Loss from discontinued operations before income taxes
Income tax expense
Loss from discontinued operations, net of tax
Note 9 – Commitments and Contingencies
Commitments
2017
2016
2015
$
$
$
— $
(390) $
—
(390) $
— $
8,263
(1,348) $
—
(1,348) $
(7,227)
—
(7,227)
The Company leases a portion of its capital equipment and certain of its facilities under leases that expire at various dates through
fiscal 2047. The majority of the Company's facility lease agreements include renewal options and rent escalation clauses. Rent
expense was $25 million, $24 million and $26 million for fiscal 2017, 2016 and 2015, respectively.
The table below sets forth the Company’s future minimum obligations under non-cancelable operating leases as of August 31,
2017 (in thousands):
Year Ending August 31,
2018
2019
2020
2021
2022
Thereafter
Total
Contingencies – Environmental
Operating
Leases
19,572
16,824
13,333
7,894
5,317
22,410
85,350
$
$
Changes in the Company’s environmental liabilities for the years ended August 31, 2017 and 2016 were as follows (in thousands):
Liabilities
Established
(Released),
Net
Balance
8/31/2015
Payments
and Other
Ending
Balance
8/31/2016
Liabilities
Established
(Released),
Net
Payments
and Other
Ending
Balance
8/31/2017
Short-Term Long-Term
$
46,793
$
480
$
(923) $
46,350
$
2,560
$
(512) $
48,398
$
2,007
$
46,391
Portland Harbor
In December 2000, the Company was notified by the United States Environmental Protection Agency (“EPA”) under the
Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”) that it is one of the potentially responsible
parties (“PRPs”) that own or operate or formerly owned or operated sites which are part of or adjacent to the Portland Harbor
Superfund site (the “Site”). The precise nature and extent of any cleanup of the Site, the parties to be involved, the timing of any
specific remedial action and the allocation of the costs for any cleanup among responsible parties have not yet been determined.
The process of site investigation, remedy selection, identification of additional PRPs and allocation of costs has been underway
for a number of years, but significant uncertainties remain. It is unclear to what extent the Company will be liable for environmental
costs or natural resource damage claims or third party contribution or damage claims with respect to the Site.
While the Company participated in certain preliminary Site study efforts, it was not party to the consent order entered into by the
EPA with certain other PRPs, referred to as the “Lower Willamette Group” (“LWG”), for a remedial investigation/feasibility study
(“RI/FS”). During fiscal 2007, the Company and certain other parties agreed to an interim settlement with the LWG under which
the Company made a cash contribution to the LWG RI/FS. The LWG has indicated that it had incurred over $115 million in
investigation-related costs over an approximately 10 year period working on the RI/FS. Following submittal of draft RI and FS
documents which the EPA largely rejected, the EPA took over the RI/FS process.
73 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The Company has joined with approximately 100 other PRPs, including the LWG members, in a voluntary process to establish
an allocation of costs at the Site, including the costs incurred by the LWG in the RI/FS process. The LWG members have also
commenced federal court litigation, which has been stayed, seeking to bring additional parties into the allocation process.
In January 2008, the Natural Resource Damages Trustee Council (“Trustees”) for Portland Harbor invited the Company and other
PRPs to participate in funding and implementing the Natural Resource Injury Assessment for the Site. Following meetings among
the Trustees and the PRPs, a funding and participation agreement was negotiated under which the participating PRPs agreed to
fund the first phase of the natural resource damage assessment. The Company joined in that Phase I agreement and paid a portion
of those costs. The Company did not participate in funding the second phase of the natural resource damage assessment.
A former Trustee, the Confederated Tribes and Bands of the Yakama Nation, which withdrew from the council in 2009, filed a
suit on January 30, 2017 against approximately 30 parties, including the Company, seeking reimbursement of certain past and
future response costs in connection with remedial action at the Site and recovery of assessment costs related to natural resources
damages from releases at and from the Site to the Multnomah Channel and the Lower Columbia River. The Company intends to
defend against such claims and does not have sufficient information to determine the likelihood of a loss in this matter or to estimate
the amount of damages being sought or the amount of such damages that could be allocated to the Company.
Estimates of the cost of remedial action for the cleanup of the in-river portion of the Site in various drafts of the FS and in the
EPA’s final FS issued in June 2016 have varied widely, from approximately $170 million to over $2.5 billion (net present value),
depending on the remedy alternative and a number of other factors. In addition, the Company and certain other stakeholders have
identified a number of serious concerns regarding the EPA's risk and remedial alternatives assessments and the EPA's cost estimates,
scheduling assumptions and conclusions regarding the feasibility, effectiveness and assignment of remediation technologies,
including that the EPA’s FS was based on data that are more than a decade old and may not accurately represent site or background
conditions.
In January 2017, the EPA issued a Record of Decision (“ROD”) that identified the selected remedy for the Site. The selected
remedy is a modified version of one of the alternative remedies in the EPA’s FS that expands the scope of the cleanup and has an
estimated cost which is significantly more than the Proposed Plan identified by the EPA in the final FS. The EPA has estimated
the total cost of the selected remedy at $1.7 billion with a net present value cost of $1.05 billion (at a 7% discount rate) and an
estimated construction period of 13 years following completion of the remedial designs. In the ROD, the EPA stated that the cost
estimate is an order-of-magnitude engineering estimate that is expected to be within +50% to -30% of the actual project cost and
that changes in the cost elements are likely to occur as a result of new information and data collected during the engineering design.
The Company has identified a number of concerns regarding the EPA's estimated cost and time required for the selected remedy.
Because of questions regarding cost-effectiveness and other concerns, such as technical feasibility, use of stale data and the need
for new baseline data, it is uncertain whether the ROD will be implemented as issued. In addition, the ROD does not determine
or allocate the responsibility for remediation costs.
In the ROD, the EPA acknowledged that the assumptions used to estimate costs for the selected remedy were developed based on
the existing data and will be finalized during the remedial design, after design level data to refine the baseline conditions are
obtained. Moreover, the ROD provides only Site-wide cost estimates and does not provide sufficient detail or ranges of certainty
and finality to estimate costs for specific sediment management areas. Accordingly, the EPA has indicated and the Company
anticipates that additional pre-remedial design investigative work, such as new baseline sampling and monitoring, will be conducted
in order to provide a re-baseline and delineated particular remedial actions for specific areas within the Site. This re-baselining
will need to occur prior to proceeding with the next phase in the process which is the remedial design. The remedial design phase
is an engineering phase during which additional technical information and data will be collected, identified and incorporated into
technical drawings and specifications developed for the subsequent remedial action. The EPA is seeking a new coalition of PRPs
to perform the re-baselining and remedial design activities. The Company is considering whether to become a party to a new
Administrative Order on Consent to perform such pre-remedial design investigative activities, if an acceptable consent order can
be finalized. The Company does not believe that its share of the costs of performing such work would be material, and the Company
believes that such costs would be allocable and that they would be reimbursable under the insurance policies discussed below.
Remediation activities are not expected to commence for a number of years and responsibility for implementing and funding the
remedy will be determined in a separate allocation process. While an allocation process is currently underway as discussed above,
the EPA's ROD has raised questions and uncertainty as to when and how that allocation process will proceed. The Company would
not expect the allocation process to proceed until after additional pre-remedial design data is collected.
Because there has not been a determination of the specific remediation actions that will be required, the amount of natural resource
damages or how the costs of the investigations and any remedy and natural resource damages will be allocated among the PRPs,
the Company believes it is not possible to reasonably estimate the amount or range of costs which it is likely to or which it is
74 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
reasonably possible that it will incur in connection with the Site, although such costs could be material to the Company’s financial
position, results of operations, cash flows and liquidity. Among the facts currently being developed are detailed information on
the history of ownership of and the nature of the uses of and activities and operations performed on each property within the Site,
which are factors that will play a substantial role in determining the allocation of investigation and remedy costs among the PRPs.
The Company has insurance policies that it believes will provide reimbursement for costs it incurs for defense, remediation and
mitigation for natural resource damages claims in connection with the Site, although there is no assurance that those policies will
cover all of the costs which the Company may incur. The Company previously recorded a liability for its estimated share of the
costs of the investigation of $1 million.
The Oregon Department of Environmental Quality is separately providing oversight of voluntary investigations by the Company
involving the Company’s sites adjacent to the Portland Harbor which are focused on controlling any current “uplands” releases
of contaminants into the Willamette River. No liabilities have been established in connection with these investigations because
the extent of contamination (if any) and the Company’s responsibility for the contamination (if any) have not yet been determined.
Recycling Operations
As of August 31, 2017 and 2016, the Company's auto and metals recycling operations had environmental liabilities of $48 million
and $46 million, respectively, for the potential remediation of locations where it has conducted business or has environmental
liabilities from historical or recent activities. The liabilities relate to the investigation and potential future remediation of soil
contamination, groundwater contamination, storm water runoff issues and other natural resource damages and were not individually
material at any site.
Steel Manufacturing Operations
The Company's steel manufacturing operations had no environmental liabilities as of August 31, 2017 and 2016.
The steel mill's electric arc furnace generates dust (“EAF dust”) that is classified as hazardous waste by the EPA because of its
zinc and lead content. As a result, the Company captures the EAF dust and ships it in specialized rail cars to a firm that applies a
treatment that allows the EAF dust to be delisted as hazardous waste.
The Company's steel mill has an operating permit issued under Title V of the Clean Air Act Amendments of 1990, which governs
certain air quality standards. The permit is based upon an annual production capacity of 950 thousand tons. The permit was first
issued in 1998 and has since been renewed through February 1, 2018.
Legacy Environmental Loss Contingencies
The Company’s environmental loss contingencies as of August 31, 2017 and 2016, other than Portland Harbor, include actual or
possible investigation and cleanup costs from historical contamination at sites currently or formerly owned or operated by the
Company or at other sites where the Company may have responsibility for such costs due to past disposal or other activities
("legacy environmental loss contingencies"). These legacy environmental loss contingencies relate to the potential remediation
of waterways and soil and groundwater contamination and may also involve natural resource damages, governmental fines and
penalties and claims by third parties for personal injury and property damage. The Company has been notified that it is or may be
a potentially responsible party at certain of these sites, and investigation and cleanup activities are ongoing or may be required in
the future. The Company recognizes a liability for such matters when the loss is probable and can be reasonably estimated. Where
investigation and cleanup activities are ongoing or where the Company has not yet been identified as having responsibility or the
contamination has not yet been identified, it is reasonably possible that the Company may need to recognize additional liabilities
in connection with such sites but the Company cannot currently reasonably estimate the possible loss or range of loss absent
additional information or developments. Such additional liabilities, individually or in the aggregate, may have a material adverse
effect on the Company's results of operations, financial condition or cash flows.
Summary - Environmental Contingencies
Other than the Portland Harbor Superfund site and legacy environmental loss contingencies, which are discussed separately above,
management currently believes that adequate provision has been made for the potential impact of these issues and that the ultimate
outcomes will not have a material adverse effect on the Consolidated Financial Statements of the Company as a whole. Historically,
the amounts the Company has ultimately paid for such remediation activities have not been material in any given period.
75 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Contingencies - Other
The Company is a party to various legal proceedings arising in the normal course of business. The Company recognizes a liability
for such matters when the loss is probable and can be reasonably estimated. Legal proceedings include those arising from accidents
involving Company-owned vehicles, including Company tractor trailers. In some instances, such accidents and the related litigation
involve accidents that have resulted in third party fatalities. It is reasonably possible that the Company may recognize additional
losses in connection with such lawsuits at the time such losses are probable and can be reasonably estimated. Such losses may be
material to the Company's consolidated financial statements. The Company believes that such losses, if incurred, will be
substantially covered by existing insurance coverage. The Company does not anticipate that the resolution of legal proceedings
arising in the normal course of business, after taking into consideration expected insurance recoveries, will have a material adverse
effect on its results of operations, financial condition, or cash flows.
Note 10 - Restructuring Charges and Other Exit-Related Activities
The Company has implemented a number of restructuring initiatives designed to reduce operating expenses and improve
profitability and to achieve further integration and synergistic cost efficiencies in its operating platform. The restructuring charges
incurred by the Company during the periods presented pertain primarily to the plan announced in the second quarter of fiscal 2015
and expanded in subsequent periods (the "Q2'15 Plan").
At the end of the second quarter of fiscal 2015, the Company commenced additional restructuring and exit-related initiatives by
undertaking strategic actions consisting of idling underutilized assets at AMR and initiating the closure of seven auto parts stores
to align the Company's business to market conditions. The Company expanded these initiatives in April 2015 and also announced
the integration of the former Metals Recycling Business and Auto Parts Business into the combined AMR platform in order to
achieve operational synergies and reduce the Company's annual operating expenses, primarily selling, general and administrative
expenses, through headcount reductions, reducing organizational layers, consolidating shared service functions and other non-
headcount measures. Additional cost savings and productivity improvement initiatives, including additional reductions in
personnel, savings from procurement activities, streamlining of administrative and supporting services functions, and adjustments
to its operating capacity through facility closures, were identified and initiated in subsequent periods. Collectively, these initiatives
are referred to as the Q2'15 Plan.
The Company incurred restructuring charges of less than $1 million, $6 million and $11 million in fiscal 2017, 2016 and 2015,
respectively. Charges relating to these initiatives were substantially complete by the end of fiscal 2017. However, the Company
may incur additional restructuring charges after fiscal 2017 as a result of remeasuring lease contract termination liabilities to reflect
changes in contractual lease rentals and sublease rentals that are not currently estimable.
In addition to the restructuring charges recorded related to these initiatives, the Company recognized a net gain from other exit-
related activities of less than $1 million during fiscal 2017, primarily related to a gain recorded in connection with the disposition
of business assets related to the elimination of a metals recycling feeder yard operation. Other exit-related activities in fiscal 2016
also included $1 million in gains recorded in connection with the disposition of business assets leading to the elimination of certain
auto and metals recycling operations. The Company incurred charges associated with other exit-related activities of $2 million
and $7 million in fiscal 2016 and 2015, respectively, consisting primarily of asset impairments and accelerated depreciation of
assets in connection with site closures.
76 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
Restructuring charges and other exit-related activities were comprised of the following (in thousands):
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
2017
2016
2015
All
Other
Plans
Q2’15
Plan
Total
Charges
All
Other
Plans
Q2’15
Plan
Total
Charges
All
Other
Plans
Q2’15
Plan
Total
Charges
Restructuring charges:
Severance costs
$ — $
(24) $
(24)
$ — $ 4,915
$ 4,915
$
391
$ 5,330
$ 5,721
Contract termination
costs
Other restructuring costs
Total restructuring
charges
Other exit-related activities:
Asset impairments and
accelerated depreciation
Gains on exit-related
disposals
Total other exit-related
activities
Total restructuring charges
and other exit-related
activities
255
—
255
—
—
—
139
—
115
394
—
370
311
—
796
—
1,107
—
377
1,223
1,245
2,048
1,622
3,271
311
5,711
6,022
1,991
8,623
10,614
158
158
—
3,127
3,127
(565)
(565)
— (1,337)
(1,337)
(407)
(407)
—
1,790
1,790
—
—
—
6,502
6,502
—
—
6,502
6,502
$
255
$ (292) $
(37)
$
311
$ 7,501
$ 7,812
$ 1,991
$15,125
$17,116
Restructuring charges and other exit-related
activities included in continuing operations
Restructuring charges and other exit-related
activities included in discontinued operations
$ (109)
$
72
$ 6,781
$ 1,031
Total restructuring charges to date
Total expected restructuring charges
$13,008
$ 4,108
Q2’15 Plan
$
$
14,449
14,480
The following illustrates the reconciliation of the restructuring liability by major type of cost for the years ended August 31, 2017
and 2016 (in thousands):
Q2’15 Plan
Balance
8/31/2015
Charges
Payments
and Other
Balance
8/31/2016
Charges
Payments
and Other
Balance
8/31/2017
Severance costs
$
1,226
$
4,915
$
Contract termination costs
Other restructuring costs
1,320
—
796
—
Total
$
2,546
$
5,711
$
(5,223) $
(957)
—
(6,180) $
918
$
1,159
—
(24) $
139
—
2,077
$
115
$
(859) $
(409)
—
(1,268) $
35
889
—
924
Severance costs
Contract termination costs
Other restructuring costs
Total
Total Charges to Date(1)
10,251
$
$
2,149
2,049
$
14,449
$
Total Expected
Charges(1)
10,251
2,180
2,049
14,480
___________________________
(1) Total charges to date and total expected charges by major type of cost reflect amounts related to the Q2'15 Plan only. Remaining charges related to prior
plans are not expected to be material.
77 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Restructuring charges and other exit-related activities by reportable segment were as follows (in thousands):
Fiscal 2017
Charges
Fiscal 2016
Charges
Fiscal 2015
Charges
Total
Charges to
Date(2)
Total
Expected
Charges(2)
Restructuring charges:
AMR and CSS(1)
Unallocated (Corporate)
Discontinued operations
Total restructuring charges
Other exit-related activities:
Asset impairments and accelerated depreciation:
AMR
Discontinued operations
Total asset impairments and accelerated
depreciation
Gains on exit-related disposals:
AMR
Total gains on exit-related disposals
Total exit-related activities
Total restructuring charges and other exit-related
activities
$
250
$
4,995
$
943
84
6,944
2,228
1,442
$
9,488
$
3,226
1,735
9,504
3,226
1,750
6,022
10,614
14,449
$
14,480
48
72
370
158
—
158
2,180
947
3,836
2,666
3,127
6,502
(565)
(565)
(407)
(1,337)
(1,337)
1,790
—
—
6,502
4,272
3,613
7,885
(1,902)
(1,902)
5,983
$
(37) $
7,812
$
17,116
$
20,432
___________________________
(1) CSS's steel manufacturing operations, formerly the SMB reportable segment, did not incur restructuring charges during the periods presented. CSS's metals
recycling operations, formerly part of the AMR reportable segment, incurred an immaterial amount of restructuring charges during the periods presented.
Therefore, the Company presents restructuring charges related to AMR and CSS on a combined basis.
(2) Total charges to date and total expected charges by reportable segment and discontinued operations reflect amounts related to the Q2'15 Plan only. Remaining
charges related to prior plans are not expected to be material.
The Company does not allocate restructuring charges and other exit-related activities to the segments' operating results because
management does not include this information in its measurement of the performance of the operating segments.
78 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Note 11 – Accumulated Other Comprehensive Loss
The components of accumulated other comprehensive loss, net of tax, are as follows as of August 31, 2017, 2016 and 2015 (in
thousands):
Balance as of August 31, 2014
$
(10,663) $
(2,036) $
58
$
(12,641)
Foreign
Currency
Translation
Adjustments
Pension
Obligations, net
Net Unrealized
Gain (Loss) on
Cash Flow
Hedges
Total
Other comprehensive loss before reclassifications
Income tax benefit
Other comprehensive loss before reclassifications,
net of tax
Amounts reclassified from accumulated other
comprehensive loss
Income tax benefit
Amounts reclassified from accumulated other
comprehensive loss, net of tax
Net periodic other comprehensive loss
Balance as of August 31, 2015
Other comprehensive loss before reclassifications
Income tax benefit
Other comprehensive loss before reclassifications,
net of tax
Amounts reclassified from accumulated other
comprehensive loss
Income tax benefit
Amounts reclassified from accumulated other
comprehensive loss, net of tax
Net periodic other comprehensive income (loss)
Balance as of August 31, 2016
Other comprehensive income before
reclassifications
Income tax expense
Other comprehensive income before
reclassifications, net of tax
Amounts reclassified from accumulated other
comprehensive loss
Income tax benefit
Amounts reclassified from accumulated other
comprehensive loss, net of tax
Net periodic other comprehensive income
Balance as of August 31, 2017
(23,346)
—
(2,874)
260
(5,310)
428
(31,530)
688
(23,346)
(2,614)
(4,882)
(30,842)
—
—
—
(23,346)
(34,009)
(530)
—
575
(198)
377
(2,237)
(4,273)
(2,139)
167
(530)
(1,972)
—
—
—
(530)
(34,539)
2,711
—
2,711
—
—
—
688
(19)
669
(1,303)
(5,576)
1,477
(194)
1,283
851
(23)
828
2,711
(31,828) $
$
2,111
(3,465) $
4,923
(339)
4,584
(298)
(240)
—
—
—
312
(72)
240
240
—
—
—
—
—
—
—
—
— $
5,498
(537)
4,961
(25,881)
(38,522)
(2,669)
167
(2,502)
1,000
(91)
909
(1,593)
(40,115)
4,188
(194)
3,994
851
(23)
828
4,822
(35,293)
Reclassifications from accumulated other comprehensive loss, both individually and in the aggregate, were immaterial to the
impacted captions in the Consolidated Statements of Operations in all periods presented.
79 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Note 12 – Derivative Financial Instruments
Foreign Currency Exchange Rate Risk Management
To manage exposure to foreign exchange rate risk, the Company has entered into foreign currency forward contracts to stabilize
the U.S. dollar amount of the transaction at settlement. Prior to fiscal 2016, the Company entered into a series of foreign currency
exchange forward contracts to sell U.S. dollars in order to hedge a portion of its exposure to fluctuating rates of exchange on
anticipated U.S. dollar-denominated sales by its Canadian subsidiary with a functional currency of the Canadian dollar. The
Company did not have any foreign currency exchange forward contracts as of August 31, 2017 and 2016, and the results of contracts
that expired during fiscal 2016 were immaterial. Accordingly, the results of foreign currency exchange forward contracts for fiscal
2017 and 2016 are excluded from the tabular disclosures below.
The following table summarizes the results of foreign currency exchange derivatives for the year ended August 31, 2015 (in
thousands):
Derivative Gain (Loss) Recognized in
Fiscal 2015
Other
Comprehensive
Income
Revenues -
Effective Portion
Other Income
(Expense), net
Foreign currency exchange forward contracts - designated as cash flow
hedges
$
(5,310) $
(4,923) $
Foreign currency exchange forward contracts - not designated as cash
flow hedges
—
—
216
(87)
There was no hedge ineffectiveness with respect to the foreign currency exchange cash flow hedges for the period presented.
Note 13 – Employee Benefits
The Company and certain of its subsidiaries have or contribute to qualified and nonqualified retirement plans covering substantially
all employees. These plans include a defined benefit pension plan, a supplemental executive retirement benefit plan (“SERBP”),
multiemployer pension plans and defined contribution plans.
Defined Benefit Pension Plan and Supplemental Executive Retirement Benefit Plan
The Company maintains a qualified defined benefit pension plan for certain nonunion employees. Effective June 30, 2006, the
Company froze this plan and ceased accruing further benefits for employee service. The Company reflects the funded status of
the defined benefit pension plan as a net asset or liability in its Consolidated Balance Sheets. Changes in its funded status are
recognized in comprehensive income (loss). The Company amortizes as a component of net periodic pension benefit cost a portion
of the net gain or loss reported within accumulated other comprehensive loss if the beginning-of-year net gain or loss exceeds 5%
of the greater of the benefit obligation or the market value of plan assets. Net periodic pension benefit cost was not material for
the years ended August 31, 2017, 2016 and 2015. The fair value of plan assets was $16 million and $15 million as of August 31,
2017 and 2016, respectively, and the projected benefit obligation was $13 million and $15 million as of August 31, 2017 and 2016,
respectively. The plan was fully funded with the plan assets exceeding the projected benefit obligation by $3 million and $1 million
as of August 31, 2017 and 2016, respectively. Plan assets were comprised entirely of Level 1 investments as of August 31, 2017
and 2016. Level 1 investments are valued based on quoted market prices of identical securities in the principal market. No
contributions are expected to be made to the defined benefit pension plan in the future; however, changes in the discount rate or
actual investment returns that are lower than the long-term expected return on plan assets could result in the need for the Company
to make additional contributions. The assumed discount rate used to calculate the projected benefit obligations was 3.68% and
3.22% as of August 31, 2017 and 2016, respectively. The Company estimates future annual benefit payments to be between $1
million and $2 million per year.
80 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The Company also has a nonqualified SERBP for certain executives. A restricted trust fund has been established with assets
invested in life insurance policies that can be used for plan benefits, although the fund is subject to claims of the Company’s
general creditors. The trust fund is included in other assets, the current portion of the pension liability is included in other accrued
liabilities, and the noncurrent portion of the pension liability is included in other long-term liabilities in the Company’s Consolidated
Balance Sheets. The trust fund was valued at $3 million as of August 31, 2017 and 2016. The trust fund assets’ gains and losses
are included in other income, net in the Company’s Consolidated Statements of Operations. The benefit obligation and the unfunded
amount were $4 million as of August 31, 2017 and 2016. Net periodic pension cost under the SERBP was not material for the
years ended August 31, 2017, 2016 and 2015.
Because the defined benefit pension plan and the SERBP are not material to the Consolidated Financial Statements, other disclosures
required by U.S. GAAP have been omitted.
Multiemployer Pension Plans
The Company contributes to 14 multiemployer pension plans in accordance with its collective bargaining agreements.
Multiemployer pension plans are defined benefit plans sponsored by multiple employers in accordance with one or more collective
bargaining agreements. The plans are jointly managed by trustees that include representatives from both management and labor
unions. Contributions to the plans are made based upon a fixed rate per hour worked and are agreed to by contributing employers
and the unions in collective bargaining. Benefit levels are set by a joint board of trustees based on the advice of an independent
actuary regarding the level of benefits that agreed-upon contributions can be expected to support. To the extent that the pension
obligation of other participating employers is unfunded, the Company may be required to make additional contributions in the
future to fund these obligations.
One of the multiemployer plans that the Company contributes to is the Steelworkers Western Independent Shops Pension Plan
(“WISPP”, EIN 90-0169564, Plan No. 001) benefiting the union employees of the Company's steel manufacturing operations,
which are covered by a collective bargaining agreement that will expire on March 31, 2019. As of October 1, 2016, the WISPP
was certified by the plan’s actuaries as being in the Green Zone, as defined by the Pension Protection Act of 2006. The Company
contributed $3 million to the WISPP for each of the years ended August 31, 2017, 2016 and 2015. These contributions represented
more than 5% of total contributions to the WISPP for each year.
In 2004, the Internal Revenue Service (“IRS”) approved a seven-year extension of the period over which the WISPP may amortize
unfunded liabilities, conditioned upon maintenance of certain minimum funding levels. In 2014, the WISPP obtained relief from
the specified funding requirements from the IRS, which requires that the WISPP meet a minimum funded percentage on each
valuation date and achieve a funded percentage of 100% as of October 1, 2029. Based on the actuarial valuation for the WISPP
as of October 1, 2016, the funded percentage (based on the ratio of the market value of assets to the accumulated benefits liability
(present value of accrued benefits) using the valuation method prescribed by the IRS) was 76.4%, which satisfies the minimum
funded percentage requirements of the IRS.
Company contributions to all of the multiemployer plans were $4 million for the years ended August 31, 2017, 2016 and 2015.
Defined Contribution Plans
The Company has several defined contribution plans covering certain employees. Company contributions to the defined
contribution plans totaled $3 million for each of the years ended August 31, 2017, 2016 and 2015.
81 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Note 14 – Share-Based Compensation
The Company’s 1993 Stock Incentive Plan, as amended, (“the Plan”) was established for its employees, consultants and directors.
There are 12.2 million shares of Class A common stock reserved for issuance under the Plan, of which 4.3 million are available
for future grants as of August 31, 2017. Share-based compensation expense was $11 million, $10 million and $10 million for the
years ended August 31, 2017, 2016 and 2015, respectively.
Restricted Stock Units
The Plan provides for the issuance of RSUs. The estimated fair value of the RSUs is based on the market closing price of the
underlying Class A common stock on the date of grant. The compensation expense associated with RSUs is recognized over the
respective requisite service period of the awards, net of estimated forfeitures.
During the years ended August 31, 2017, 2016 and 2015, the Compensation Committee granted 314,862 RSUs, 361,131 RSUs
and 287,180 RSUs, respectively, to its key employees, officers and employee directors under the Plan. The RSUs generally vest
20% per year over five years commencing October 31 of the year after grant. In addition, in the first quarter of fiscal 2016 the
Compensation Committee granted 48,163 RSUs with a two-year vesting term and no retirement-eligibility provisions under the
SIP. The estimated fair value of the RSUs granted during the years ended August 31, 2017, 2016 and 2015 was $7 million, $7
million and $6 million, respectively.
A summary of the Company’s restricted stock unit activity is as follows:
Outstanding as of August 31, 2014
Granted
Vested
Forfeited
Outstanding as of August 31, 2015
Granted
Vested
Forfeited
Outstanding as of August 31, 2016
Granted
Vested
Forfeited
Outstanding as of August 31, 2017
Weighted
Number of
Average Grant
Shares
Date Fair Value
(in thousands)
33.97
$
389
22.58
287
$
(151) $
35.96
(40) $
26.59
27.21
$
485
18.28
409
$
(145) $
30.86
(14) $
22.61
21.59
$
735
20.95
315
$
(218) $
22.94
23.55
— $
21.00
$
832
$
$
$
Fair Value(1)
20.34
16.36
23.50
____________________________
(1) Amounts represent the weighted average value of the Company’s Class A common stock on the date that the restricted stock units vested.
The Company recognized compensation expense associated with RSUs of $6 million, $6 million and $7 million for the years
ended August 31, 2017, 2016 and 2015, respectively. As of August 31, 2017, total unrecognized compensation costs related to
unvested RSUs amounted to $7 million, which is expected to be recognized over a weighted average period of 2.5 years.
Performance Share Awards
The Plan authorizes performance-based awards to certain employees subject to certain conditions and restrictions. A participant
generally must be employed by the Company on October 31 following the end of the performance period to receive an award
payout, although adjusted awards will be paid if employment terminates earlier on account of death, disability, retirement,
termination without cause after the first year of the performance period or a sale of the Company or the reportable segments for
which the participant works. Awards will be paid in Class A common stock as soon as practicable after October 31 following the
end of the performance period.
82 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The Company accrues compensation cost for performance share awards based on the probable outcome of specified performance
conditions, net of estimated forfeitures. The Company accrues compensation cost if it is probable that the performance conditions
will be achieved. The Company reassesses whether achievement of the performance conditions are probable at each reporting
date. If it is probable that the actual performance results will exceed the stated target performance conditions, the Company accrues
additional compensation cost for the additional performance shares to be awarded. If, upon reassessment, it is no longer probable
that the actual performance results will exceed the stated target performance conditions, or that it is no longer probable that the
target performance condition will be achieved, the Company reverses any recognized compensation cost for shares no longer
probable of being issued. If the performance conditions are not achieved at the end of the service period, all related compensation
cost previously recognized is reversed.
Fiscal 2015 – 2016 Performance Share Awards
The Compensation Committee approved performance-based awards under the Plan with a grant date of November 25, 2014. The
performance targets are based on the Company's EBITDA (weighted at 50%) and return on equity (weighted at 50%) for the two
years of the performance period, with award payouts ranging from a threshold of 50% to a maximum of 200% for each portion
of the awards.
Fiscal 2016 – 2018 (November) Performance Share Awards
In the first quarter of fiscal 2016, the Compensation Committee approved performance-based awards under the Plan with a grant
date of November 9, 2015. The 201,702 performance share awards granted by the Compensation Committee are comprised of
two separate and distinct awards with different vesting conditions.
The Compensation Committee granted 99,860 of the performance share awards based on a relative Total Shareholder Return
("TSR") metric over a performance period spanning November 9, 2015 to August 31, 2018. Award share payouts range from a
threshold of 50% to a maximum of 200% based on the relative ranking of the Company's TSR among a designated peer group of
16 companies. The TSR award stipulates certain limitations to the payout in the event the payout reaches a defined ceiling level
or the Company's TSR is negative. The TSR awards contain a market condition and, therefore, once the award recipients complete
the requisite service period, the related compensation expense based on the grant-date fair value is not changed, regardless of
whether the market condition has been satisfied. The estimated fair value of the TSR awards at the date of grant was $2 million.
The Company estimated the fair value of the TSR awards using a Monte-Carlo simulation model utilizing several key assumptions
including expected Company and peer company share price volatility, correlation coefficients between peers, the risk-free rate of
return, the expected dividend yield and other award design features.
The remaining 101,842 performance share awards have a three-year performance period consisting of the Company’s fiscal 2016,
2017 and 2018. The performance targets are based on the Company's cash flow return on investment (“CFROI”) over the three-
year performance period, with award payouts ranging from a threshold of 50% to a maximum of 200%. The fair value of the
awards granted was based on the market closing price of the underlying Class A common stock on the grant date and totaled $2
million.
Fiscal 2016 – 2018 (April) Performance Share Awards
In the third quarter of fiscal 2016, the Compensation Committee approved the second half of the fiscal 2016 performance-based
awards with a grant date of April 27, 2016. The Compensation Committee granted 152,221 performance share awards consisting
of 73,546 TSR awards and 78,675 CFROI awards to the Company's key employees and officers under the Plan with terms
substantially similar to the awards granted in the first quarter of fiscal 2016, as described above in this Note, except that the
performance period for the TSR awards started on April 27, 2016 and for the CFROI awards on March 1, 2016. The estimated
fair value of each of the TSR awards and CFROI awards at the date of grant was $2 million.
Fiscal 2017 – 2019 (November) Performance Share Awards
In the first quarter of fiscal 2017, the Compensation Committee approved performance-based awards under the Plan with a grant
date of November 1, 2016. The 134,899 performance share awards granted by the Compensation Committee are comprised of
two separate and distinct awards with different vesting conditions.
The Compensation Committee granted 65,506 performance share awards based on a relative TSR metric over a performance
period spanning November 1, 2016 to August 31, 2019. Award share payouts range from a threshold of 50% to a maximum of
200% based on the relative ranking of the Company's TSR among a designated peer group of 16 companies. The TSR award
stipulates certain limitations to the payout in the event the payout reaches a defined ceiling level or the Company's TSR is negative.
The TSR awards contain a market condition and, therefore, once the award recipients complete the requisite service period, the
related compensation expense based on the grant-date fair value is not changed, regardless of whether the market condition has
been satisfied. The estimated fair value of the TSR awards at the date of grant was $2 million. The Company estimated the fair
value of the TSR awards using a Monte-Carlo simulation model utilizing several key assumptions including expected Company
83 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
and peer company share price volatility, correlation coefficients between peers, the risk-free rate of return, the expected dividend
yield and other award design features.
The remaining 69,393 performance share awards have a three-year performance period consisting of the Company’s fiscal 2017,
2018 and 2019. The performance targets are based on the Company's cash flow return on investment ("CFROI") over the three-
year performance period, with award payouts ranging from a threshold of 50% to a maximum of 200%. The fair value of the
awards granted was based on the market closing price of the underlying Class A common stock on the grant date and totaled $2
million.
Fiscal 2017 – 2019 (April) Performance Share Awards
In the third quarter of fiscal 2017, the Compensation Committee approved the second half of the fiscal 2017 performance-based
awards with a grant date of April 27, 2017. The Compensation Committee granted 167,358 performance share awards consisting
of 81,262 TSR awards and 86,096 CFROI awards to the Company's key employees and officers under the Plan with terms
substantially similar to the awards granted in the first quarter of fiscal 2017, as described above in this Note, except that the
performance period for the TSR awards started on April 27, 2017, and the performance period for the CFROI awards started on
March 1, 2017. The estimated fair value of each of these TSR awards and CFROI awards at the date of grant was $2 million.
A summary of the Company’s performance-based awards activity is as follows:
Outstanding as of August 31, 2014
Granted
Vested
Forfeited
Outstanding as of August 31, 2015
Granted
Vested
Forfeited
Outstanding as of August 31, 2016
Granted
Vested
Forfeited
Outstanding as of August 31, 2017
Number of
Shares
(in thousands)
Weighted
Average Grant
Date Fair Value
Fair Value(1)
623
$
$
269
(98) $
(159) $
$
635
364
$
(194) $
(210) $
$
595
302
$
(163) $
(83) $
$
651
27.93
24.02
26.27
$
23.60
26.36
26.92
19.19
28.82
$
16.86
28.48
21.02
21.52
24.02
$
24.15
24.02
20.12
_____________________________
(1) Amounts represent the weighted average value of the Company’s Class A common stock on the date that the performance share awards vested.
Compensation expense associated with performance-based awards was calculated using management’s current estimate of the
expected level of achievement of the performance targets under the Plan. Compensation expense for anticipated awards based on
the Company’s financial performance was $3 million, $4 million and $2 million for the years ended August 31, 2017, 2016 and
2015, respectively. As of August 31, 2017, unrecognized compensation costs related to non-vested performance shares amounted
to $7 million, which is expected to be recognized over a weighted average period of 1.6 years.
Deferred Stock Units
The Deferred Compensation Plan for Non-Employee Directors (“DSU Plan”) provides for the issuance of DSUs to non-employee
directors to be granted under the Plan. Each DSU gives the director the right to receive one share of Class A common stock at a
future date. Immediately following the annual meeting of shareholders, each non-employee director will receive DSUs which will
become fully vested on the day before the next annual meeting, subject to continued service on the Board. The compensation
expense associated with the DSUs granted is recognized over the respective requisite service period of the awards.
The Company will issue Class A common stock to a director pursuant to vested DSUs in a lump sum in January of the first year
after the director ceases to be a director of the Company, subject to the right of the director to elect an installment payment program
under the DSU Plan.
84 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
DSUs granted during the years ended August 31, 2017, 2016 and 2015 totaled 42,771 shares, 57,780 shares and 48,590 shares,
respectively. The compensation expense associated with DSUs and the total value of shares vested during each of the years ended
August 31, 2017, 2016 and 2015, as well as the unrecognized compensation expense as of August 31, 2017, were not material.
Stock Options
No options were granted in fiscal 2017, 2016, and 2015, and all of the options outstanding during the periods presented had expired
as of August 31, 2017. Compensation expense associated with stock options, the total proceeds received from option exercises
and the tax benefits realized from options exercised was zero for the years ended August 31, 2017, 2016 and 2015.
A summary of the Company’s stock option activity and related information is as follows:
Outstanding as of August 31, 2014
Granted
Exercised
Canceled
Outstanding as of August 31, 2015
Granted
Exercised
Canceled
Outstanding as of August 31, 2016
Granted
Exercised
Canceled
Outstanding as of August 31, 2017
Options
(in thousands)
Weighted
Average
Exercise
Price
526
$
— $
— $
(122) $
$
404
— $
— $
(182) $
$
222
— $
— $
(222) $
— $
32.25
—
—
24.95
34.46
—
—
34.11
34.75
—
—
34.75
—
Weighted
Average
Remaining
Contractual
Term (in years)
2.2
Aggregate
Intrinsic Value
(in thousands)(1)
335
$
1.3
$
1.0
$
$
—
—
—
____________________________
(1) Amounts represent the difference between the exercise price and the closing price of the Company’s stock on the last trading day of the corresponding fiscal
year, multiplied by the number of in-the-money options.
85 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Note 15 – Income Taxes
Income (loss) from continuing operations before income taxes was as follows for the years ended August 31 (in thousands):
United States
Foreign
Total
2017
2016
2015
$
$
43,871
4,819
48,690
$
$
(4,303) $
(11,202)
(15,505) $
(113,084)
(87,380)
(200,464)
Income tax expense (benefit) from continuing operations consisted of the following for the years ended August 31 (in thousands):
Current:
Federal
State
Foreign
Total current tax expense (benefit)
Deferred:
Federal
State
Foreign
Total deferred tax expense (benefit)
Total income tax expense (benefit)
2017
2016
2015
$
$
$
$
(1,130) $
190
(16)
(956) $
2,046
$
232
—
2,278
23
$
$
$
180
25
228
502
54
(49)
507
1,322
$
735
$
(11,275)
(84)
732
(10,627)
(4,752)
2,805
(41)
(1,988)
(12,615)
A reconciliation of the difference between the federal statutory rate and the Company’s effective tax rate for the years ended August
31 is as follows:
Federal statutory rate
State taxes, net of credits
Foreign income taxed at different rates
Non-deductible officers’ compensation
Noncontrolling interests
Research and development credits
Valuation allowance on deferred tax assets
Unrecognized tax benefits
Non-deductible goodwill
Realized foreign investment basis
Other
Effective tax rate
2017
2016
2015
35.0%
35.0 %
35.0%
1.8
(1.9)
2.2
(1.8)
(1.5)
(31.2)
1.3
—
(0.9)
(0.3)
2.7%
1.3
(12.0)
(2.0)
4.1
2.4
(59.0)
(3.6)
(0.9)
29.4
0.6
(4.7)%
1.1
(7.7)
(0.1)
0.3
0.3
(25.2)
(0.6)
(2.5)
6.3
(0.6)
6.3%
The Company's effective tax rate from continuing operations in fiscal 2017 was an expense of 2.7%, which was lower than the
U.S. federal statutory rate of 35% primarily due to the Company's full valuation allowance positions and federal income tax refund
claims, partially offset by increases in deferred tax liabilities from indefinite-lived assets in all jurisdictions. The valuation
allowances on the Company's deferred tax assets are the result of negative objective evidence, including the effects of historical
losses in our tax jurisdictions, outweighing positive objective and subjective evidence, indicating that it is more likely than not
that the associated tax benefit will not be realized.
86 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The Company's effective tax rate from continuing operations in fiscal 2016 was an expense of 4.7%, which was lower than the
U.S. federal statutory rate of 35%. The effective tax rate was reduced for valuation allowances on deferred tax assets and the
aggregate impact of foreign income taxed at different rates. Those reductions were partially offset by the realization of deductible
foreign investment basis for tax purposes. The Company’s income tax expense is comprised primarily of the increase in deferred
tax liabilities from indefinite-lived assets plus certain state cash tax expenses. The increase in valuation allowance on deferred tax
assets was recognized as a result of negative evidence, including recent losses in all tax jurisdictions, outweighing the more
subjective positive evidence, indicating that it is more likely than not that the associated tax benefit will not be realized. Realization
of the deferred tax assets is dependent upon generating sufficient taxable income in the associated tax jurisdictions in future years
to benefit from the reversal of net deductible temporary differences and from the utilization of net operating losses.
The Company's effective tax rate from continuing operations in fiscal 2015 was a benefit of 6.3% which was lower than the U.S.
federal statutory rate of 35%. The effective tax rate was reduced by 33% for valuation allowances on deferred tax assets and the
aggregate impact of excluding foreign income taxed at different rates. Those expenses were partially offset by the recognition of
a $13 million benefit related to the realization of deductible foreign investment basis for tax purposes. The increase in valuation
allowance on deferred tax assets was recognized as a result of negative evidence, including recent losses in all tax jurisdictions,
outweighing the more subjective positive evidence, indicating that it is more likely than not that the associated tax benefit will
not be realized.
Deferred tax assets and liabilities were comprised of the following as of August 31 (in thousands):
Deferred tax assets:
Environmental liabilities
Employee benefit accruals
State income tax and other
Net operating loss carryforwards
State credit carryforwards
Inventory valuation methods
Amortizable goodwill and other intangibles
Valuation allowances
Total deferred tax assets
Deferred tax liabilities:
Accelerated depreciation and other basis differences
Prepaid expense acceleration
Inventory valuation methods
Total deferred tax liabilities
Net deferred tax liability
2017
2016
$
11,187
$
13,692
7,608
9,243
6,678
690
41,793
(70,374)
20,517
37,096
2,568
—
39,664
19,147
$
$
$
$
$
$
11,048
12,620
8,518
19,723
6,352
—
47,023
(86,917)
18,367
32,528
2,402
119
35,049
16,682
As of August 31, 2017, the Company had federal net operating loss carryforwards of $12 million, which will expire if not used
by 2036. Foreign operating loss carryforwards were $27 million, which expire if not used between 2024 and 2037. State credit
carryforwards will expire if not used between 2018 and 2025.
87 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Accounting for Uncertainty in Income Taxes
The following table summarizes the activity related to the Company’s reserve for unrecognized tax benefits, excluding interest
and penalties, for the years ended August 31 (in thousands):
Unrecognized tax benefits, as of the beginning of the year
Additions for tax positions of prior years
Reductions for tax positions of prior years
Additions for tax positions of the current year
Settlements with tax authorities
Unrecognized tax benefits, as of the end of the year
2017
2016
2015
4,724
$
3,970
$
2,780
—
(120)
944
—
—
(56)
810
—
5,548
$
4,724
$
—
—
1,571
(381)
3,970
$
$
The Company does not anticipate any material changes to the reserve in the next 12 months. Reserves pertaining to positions
claimed on the fiscal year 2013 through 2017 tax returns would result in net operating loss offsets in the event the positions were
successfully challenged. Pursuant to FASB's Accounting Standards Update 2013-11, the reserves are netted against deferred tax
assets related to net operating loss carryforwards. The Company believes that it is reasonably possible that approximately $2
million of its currently remaining unrecognized tax benefits may be recognized by the end of fiscal 2018 as a result of a lapse of
the statute of limitations.
The recognized amounts of tax-related penalties and interest were not material for all periods presented.
The Company files federal and state income tax returns in the U.S. and foreign tax returns in Puerto Rico and Canada. For U.S.
federal income tax returns, fiscal years 2013 to 2016 remain subject to examination under the statute of limitations.
Note 16 – Net Income (Loss) Per Share
The following table sets forth the information used to compute basic and diluted net income (loss) per share attributable to SSI
for the years ended August 31 (in thousands):
Income (loss) from continuing operations
Net income attributable to noncontrolling interests
Income (loss) from continuing operations attributable to SSI
Loss from discontinued operations, net of tax
Net income (loss) attributable to SSI
Computation of shares:
Weighted average common shares outstanding, basic
Incremental common shares attributable to dilutive performance
share, RSU and DSU awards
Weighted average common shares outstanding, diluted
$
$
2017
2016
2015
47,368
(2,467)
44,901
(390)
44,511
$
$
27,537
604
28,141
(16,240) $
(1,821)
(18,061)
(1,348)
(19,409) $
27,229
—
27,229
(187,849)
(1,933)
(189,782)
(7,227)
(197,009)
27,010
—
27,010
Common stock equivalent shares of 251,899, 1,016,745 and 1,018,858 were considered antidilutive and were excluded from the
calculation of diluted net income (loss) per share attributable to SSI for the years ended August 31, 2017, 2016 and 2015, respectively.
Note 17 – Related Party Transactions
The Company purchases recycled metal from its joint venture operations at prices that approximate fair market value. These
purchases totaled $14 million, $12 million and $22 million for the years ended August 31, 2017, 2016 and 2015, respectively.
88 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Thomas D. Klauer, Jr., who had been President of the Company’s former Auto Parts Business prior to his retirement on January 5,
2015, is the sole shareholder of a corporation that is the 25% minority partner in a partnership in which the Company is the 75%
partner and which operates five self-service stores in Northern California. Mr. Klauer’s 25% share of the profits of this partnership,
through the date of his retirement, totaled $1 million for the year ended August 31, 2015. The partnership leases properties from
entities in which Mr. Klauer has ownership interests under agreements that expire in December 2020 with options to renew the
leases, upon expiration, for multiple periods. The rent paid by the partnership to the entities in which Mr. Klauer has ownership
interests, through the date of his retirement, was less than $1 million for the year ended August 31, 2015.
Certain members of the Schnitzer family own significant interests in, or are related to owners of, MMGL Corp (“MMGL,” formerly
known as Schnitzer Investment Corp.), which is engaged in the real estate business and was a subsidiary of the Company prior to
1989. The Company and MMGL are involved in a cost sharing arrangement with respect to defense costs related to Portland
Harbor. MMGL was considered a related party for financial reporting purposes prior to January 2015 due to the involvement of
Kenneth M. Novack, a former member of the Company's board of directors, in the management of MMGL. As of January 2015,
Mr. Novack was no longer a member of the Company's board of directors and, thus, MMGL ceased being a related party. As of
August 31, 2014, $1 million was receivable from MMGL, which was paid in full in the first quarter of fiscal 2015.
Note 18 – Segment Information
The accounting standards for reporting information about operating segments define an operating segment as a component of an
enterprise that engages in business activities from which it may earn revenues and incur expenses for which discrete financial
information is available that is evaluated regularly by the chief operating decision maker in deciding how to allocate resources
and in assessing performance.
Prior to the fourth quarter of fiscal 2017, the Company's internal organizational and reporting structure supported two operating
and reportable segments: the Auto and Metals Recycling ("AMR") business and the Steel Manufacturing Business ("SMB"). In
the fourth quarter of fiscal 2017, in accordance with its plan announced in June 2017, the Company modified its internal
organizational and reporting structure to combine its steel manufacturing operations, which had been reported as the SMB segment,
with its Oregon metals recycling operations, which had been reported within the AMR segment, forming a new division named
Cascade Steel and Scrap ("CSS"). This resulted in a realignment of how the Chief Executive Officer, who is considered the
Company's chief operating decision maker, reviews performance and makes decisions on resource allocation. The Company began
reporting on this new segment structure in the fourth quarter of fiscal 2017 as reflected in this Annual Report on Form 10-K. The
segment data for the comparable periods presented has been recast to conform to the current period presentation for all activities
of the reorganized segments. Recasting this historical information did not have an impact on the Company's consolidated financial
performance for any of the periods presented.
AMR buys and processes ferrous and nonferrous scrap metal for sale to foreign and domestic steel producers or their representatives
and procures salvaged vehicles and sells serviceable used auto parts from these vehicles through a network of self-service auto
parts stores. These auto parts stores also supply the Company's shredding facilities with autobodies that are processed into saleable
recycled scrap metal. CSS operates a steel mini-mill that produces a range of finished steel long products using recycled scrap
metal and other raw materials. CSS's steel mill obtains substantially all of its recycled scrap metal raw material requirements from
its integrated metals recycling and joint venture operations.
The Company holds noncontrolling ownership interests in joint ventures, which are either in the metals recycling business or are
suppliers of unprocessed metal. The Company's allocable portion of the results of these joint ventures is reported within the segment
results. Three of the joint venture interests are presented as part of AMR operations, and one interest is presented as part of CSS
operations. The joint ventures sell recycled scrap metal to AMR and to CSS at prices that approximate local market rates, which
produces intercompany profit. This intercompany profit is eliminated while the products remain in inventory and is not recognized
until the finished products are sold to third parties.
Intersegment sales from AMR to CSS are made at prices that approximate local market rates. These intercompany sales tend to
produce intercompany profits which are not recognized until the finished products are ultimately sold to third parties.
89 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The information provided below is obtained from internal information that is provided to the Company’s chief operating decision
maker for the purpose of corporate management. The Company uses segment operating income to measure segment performance.
The Company does not allocate corporate interest income and expense, income taxes and other income to its reportable segments.
Certain expenses related to shared services that support operational activities and transactions are allocated from Corporate to the
segments. Unallocated Corporate expense consists primarily of expense for management and certain administrative services that
benefit both reportable segments. Because of the unallocated income and expense, the operating income of each reportable segment
does not reflect the operating income the reportable segment would report as a stand-alone business. In addition, the Company
does not allocate restructuring charges and other exit-related activities to the segment operating income because management does
not include this information in its measurement of the performance of the operating segments. The results of discontinued operations
are excluded from segment operating income and are presented separately, net of tax, from the results of ongoing operations for
all periods presented.
The following is a summary of the Company’s total assets as of August 31 (in thousands):
Total assets:
Auto and Metals Recycling(1)
Cascade Steel and Scrap
Total segment assets
Corporate and eliminations(2)
Total assets
Property, plant and equipment, net (3)
2017
2016
$
1,298,757
$
1,186,949
696,269
1,995,026
(1,061,271)
933,755
390,629
$
$
$
$
696,031
1,882,980
(991,551)
891,429
392,820
_____________________________
(1) AMR total assets include $5 million and $6 million as of August 31, 2017 and 2016, respectively, for investments in joint ventures. CSS total assets include
$7 million and $8 million as of August 31, 2017 and 2016, respectively, for investment in joint ventures.
(2) The substantial majority of Corporate and eliminations total assets is comprised of Corporate intercompany payables to the Company's operating segments
and intercompany eliminations.
(3) Property, plant and equipment, net includes $17 million and $19 million as of August 31, 2017 and 2016, respectively, at our Canadian locations.
90 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The table below illustrates the Company’s results from continuing operations by reportable segment for the years ended August 31
(in thousands):
Auto and Metals Recycling:
Revenues
Less: Intersegment revenues
AMR external customer revenues
Cascade Steel and Scrap:
Revenues
Total revenues
Depreciation and amortization:
Auto and Metals Recycling
Cascade Steel and Scrap
Segment depreciation and amortization
Corporate
Total depreciation and amortization
Capital expenditures:
Auto and Metals Recycling
Cascade Steel and Scrap
Segment capital expenditures
Corporate
Total capital expenditures
Reconciliation of the Company’s segment operating income (loss) to
income (loss) from continuing operations before income taxes:
Auto and Metals Recycling(1)
Cascade Steel and Scrap(2)
Segment operating income (loss)
Restructuring charges and other exit-related activities
Corporate and eliminations
Operating income (loss)
Interest expense
Other income, net
$
$
$
$
$
$
$
Income (loss) from continuing operations before income taxes $
2017
2016
2015
$
$
$
$
$
1,363,618
(15,647)
1,347,971
339,620
1,687,591
34,853
12,525
47,378
2,462
49,840
34,575
10,224
44,799
141
$
$
$
$
$
1,060,592
(12,081)
1,048,511
304,032
1,352,543
39,033
13,052
52,085
2,545
54,630
26,623
7,044
33,667
904
44,940
$
34,571
$
91,405
$
23,168
$
5,275
96,680
109
(40,776)
56,013
(8,081)
758
48,690
$
4,696
27,864
(6,781)
(28,925)
(7,842)
(8,889)
1,226
(15,505) $
1,513,315
(33,029)
1,480,286
435,113
1,915,399
50,126
14,164
64,290
2,825
67,115
21,845
7,816
29,661
2,636
32,297
(166,119)
20,535
(145,584)
(13,008)
(36,937)
(195,529)
(9,191)
4,256
(200,464)
_____________________________
(1) AMR operating income (loss) includes $2 million, less than $1 million and $1 million in income from joint ventures accounted for by the equity method in
fiscal 2017, 2016 and 2015, respectively. AMR operating income (loss) includes a goodwill impairment charge of $9 million in fiscal 2016, and other asset
impairment charges (recoveries), net of less than $(1) million, $16 million and $44 million in fiscal 2017, 2016 and 2015, respectively.
(2) CSS operating income includes $1 million, less than $1 million and $1 million in income from joint ventures accounted for by the equity method in fiscal
2017, 2016 and 2015, respectively. CSS operating income includes asset impairment charges (recoveries), net of $(1) million and $4 million in fiscal 2017
and 2016, respectively.
91 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
SCHNITZER STEEL INDUSTRIES, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The following revenues from external customers are presented based on the sales destination and by major product for the years
ended August 31 (in thousands):
Revenues based on sales destination:
Foreign
Domestic
Total revenues from external customers
Major product information:
Ferrous scrap metal
Nonferrous scrap metal
Retail and other
Finished steel products
Semi-finished steel products
Total revenues from external customers
$
$
$
2017
2016
2015
894,265
793,326
1,687,591
$
$
683,569
668,974
1,352,543
$
$
984,910
930,489
1,915,399
855,161
$
619,060
$
425,989
126,235
280,206
—
340,025
123,553
269,355
550
922,291
488,036
130,035
363,795
11,242
$
1,687,591
$
1,352,543
$
1,915,399
In fiscal 2017, 2016 and 2015, there were no external customers that accounted for more than 10% of the Company’s consolidated
revenues. Sales to customers in foreign countries are a significant part of the Company’s business. The schedule below identifies
those foreign countries to which the Company’s sales exceeded 10% of consolidated revenues in any of the last three years ended
August 31 (in thousands):
China
Turkey(1)
2017
$
216,231
N/A
% of
Revenue
2016
% of
Revenue
2015
% of
Revenue
13% $
150,570
N/A
163,696
11% $
240,279
12%
225,040
13%
12%
_____________________________
(1) N/A = Sales were less than the 10% threshold.
92 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
In the opinion of management, this unaudited quarterly financial summary includes all adjustments necessary for a fair statement
of the results for the periods represented (in thousands, except per share amounts):
Quarterly Financial Data (Unaudited)
Revenues
Cost of goods sold
Operating income
Loss from discontinued operations, net of tax
Net income (loss) attributable to SSI
Basic net income (loss) per share attributable to SSI
Diluted net income (loss) per share attributable to SSI
Revenues
Cost of goods sold
Operating income (loss)
Loss from discontinued operations, net of tax
Net income (loss) attributable to SSI
Basic net income (loss) per share attributable to SSI
Diluted net income (loss) per share attributable to SSI
$
$
$
$
$
$
$
$
$
$
$
$
$
$
Fiscal 2017
First
Second
Third
Fourth
334,161
295,892
$
$
382,084
326,804
$
$
477,088
411,109
$
$
494,258
430,703
587
$
(53) $
(1,326) $
(0.05) $
(0.05) $
14,171
$
(95) $
$
11,037
19,147
$
(127) $
$
16,565
0.40
0.40
$
$
0.60
0.60
Fiscal 2016
First
Second
Third
321,198
$
289,077
$
351,604
284,854
$
(4,028) $
(65) $
(5,296) $
(0.20) $
(0.20) $
259,670
$
(37,076) $
(1,024) $
(41,245) $
(1.52) $
(1.52) $
294,738
14,886
$
(116) $
$
11,000
0.40
0.40
$
$
$
$
$
$
22,108
(114)
18,235
0.66
0.64
Fourth
390,664
336,726
18,376
(143)
16,132
0.59
0.58
___________________________
The sum of quarterly amounts may not agree to the full-year equivalent due to rounding.
In the second quarter of fiscal 2016, operating results included a goodwill impairment charge of $9 million, other asset impairment
charges of $18 million and restructuring charges and other exit-related activities of $5 million. In the fourth quarter of fiscal 2016,
operating results included other asset impairment charges of $2 million and an insurance reimbursement gain of $6 million.
See Note 2 - Summary of Significant Accounting Policies, Note 6 - Goodwill and Other Intangible Assets, net, Note 8 - Discontinued
Operations, and Note 9 - Commitments and Contingencies.
93 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
Schedule II – Valuation and Qualifying Accounts
For the Years Ended August 31, 2017, 2016 and 2015
(In thousands)
Column A
Description
Column B
Balance at
beginning
of period
Column C
Column D
Charges to cost
and expenses
Deductions
Column E
Balance at
end of
period
Fiscal 2017
Allowance for doubtful accounts
Deferred tax valuation allowance
Fiscal 2016
Allowance for doubtful accounts
Deferred tax valuation allowance
Fiscal 2015
Allowance for doubtful accounts
Allowance for notes and other contractual receivables
Deferred tax valuation allowance
$
$
$
$
$
$
$
2,315
86,917
2,496
78,304
2,720
7,602
30,265
$
$
$
$
$
$
$
126
690
131
8,613
$
$
$
$
(161) $
(17,233) $
2,280
70,374
(312) $
— $
2,315
86,917
(280) $
— $
$
48,039
56
$
(7,602) $
— $
2,496
—
78,304
94 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL
DISCLOSURE
None.
ITEM 9A. CONTROLS AND PROCEDURES
Disclosure Controls and Procedures
The Company maintains disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities and
Exchange Act of 1934, as amended (the “Exchange Act”)) that are designed to ensure that information required to be disclosed
by the Company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported
within the time periods specified by the Securities and Exchange Commission’s rules and forms and that such information is
accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate,
to allow timely decisions regarding required disclosures. Any controls and procedures, no matter how well designed and operated,
can only provide reasonable assurance of achieving the desired control objectives. The Company’s management, with the
participation of the Chief Executive Officer and Chief Financial Officer, has completed an evaluation of the effectiveness of the
design and operation of the Company’s disclosure controls and procedures. Based on this evaluation, the Company’s Chief
Executive Officer and Chief Financial Officer have concluded that, as of August 31, 2017, the Company’s disclosure controls and
procedures were effective at the reasonable assurance level.
Management’s Annual Report on Internal Control Over Financial Reporting
Management’s Annual Report on Internal Control Over Financial Reporting is presented within Part II, Item 8 of this report and
is incorporated herein by reference.
Changes in Internal Control Over Financial Reporting
There was no change in the Company’s internal control over financial reporting (as that term is defined in Rules 13a-15(f) and
15d-15(f) under the Exchange Act) during its most recent fiscal quarter that has materially affected, or is reasonably likely to
materially affect, the Company’s internal control over financial reporting.
ITEM 9B. OTHER INFORMATION
None.
95 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
PART III
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information required by Item 401 of Regulation S-K regarding directors, and information required by Items 405, 407(c)(3), 407(d)
(4) and 407(d)(5) of Regulation S-K, will be included under “Election of Directors,” “Corporate Governance” and “Section 16(a)
Beneficial Ownership Reporting Compliance” in the Company’s Proxy Statement for its 2018 Annual Meeting of Shareholders
and is incorporated herein by reference.
Executive Officers of the Registrant
Name
Tamara L. Lundgren
Richard D. Peach
Michael Henderson
Steven Heiskell
Jeffrey Dyck
Peter Saba
Stefano Gaggini
Age
Office
60
54
58
48
54
56
46
President and Chief Executive Officer
Senior Vice President, Chief Financial Officer and Chief of Corporate Operations
Senior Vice President, Co-President, Auto and Metals Recycling, and Co-President,
Cascade Steel and Scrap
Senior Vice President and Co-President, Auto and Metals Recycling
Senior Vice President and Co-President, Cascade Steel and Scrap
Senior Vice President, General Counsel and Corporate Secretary
Vice President, Corporate Controller and Principal Accounting Officer
Tamara L. Lundgren has been our President and Chief Executive Officer since December 2008. She joined the Company in
September 2005 as Vice President and Chief Strategy Officer and held roles of increasing responsibility, including Executive Vice
President and Chief Operating Officer. Prior to joining us, Ms. Lundgren was an investment banker and lawyer with 25 years of
experience in the U.S. and Europe. She was a Managing Director in the Investment Banking Division of JPMorgan Chase, which
she joined in 2001, and Deutsche Bank, which she joined in 1996. Earlier she was a partner in the Washington, DC law firm of
Hogan Lovells (then Hogan & Hartson, LLP). Ms. Lundgren earned a B.A. degree from Wellesley College and a J.D. degree from
the Northwestern University School of Law.
Richard D. Peach joined us in March 2007 and was appointed Chief Financial Officer in December 2007. In September 2016, in
addition to his responsibilities as Chief Financial Officer, Mr. Peach assumed the role of Chief of Corporate Operations. Prior to
joining us, Mr. Peach was the Chief Financial Officer and Senior Vice President with the Western U.S. energy utility, PacifiCorp,
from 2003 to 2006. From 1995 to 2002, he served in senior management positions with ScottishPower, the international energy
company, including Group Controller, Managing Director of United Kingdom Customer Services and Director of Energy Supply
Finance. Prior to joining ScottishPower, Mr. Peach was a senior manager with Coopers & Lybrand. Mr. Peach is a member of the
Institute of Chartered Accountants of Scotland.
Michael Henderson joined us in April 2012 and served as Chief Operating Officer and President of the Metals Recycling Business,
prior to his promotion to Co-President of the Auto and Metals Recycling business in April 2015, and then Co-President of the
Cascade Steel and Scrap business in June 2017. Prior to joining Schnitzer, he was Eastern Region President for Sims Metal
Management where he was responsible for 26 facilities, including four shredders and five port locations. He began his career with
Naparano Iron & Metal and has more than 30 years in the scrap industry, including expertise in both the ferrous and nonferrous
sides of the business.
Steven Heiskell joined us in August 2004 and served in a variety of capacities within our Auto Parts Business, including as Vice
President Corporate Development, Chief Development Officer, General Manager and Vice President and Managing Director, prior
to his promotion to Co-President of the Auto and Metals Recycling business in April 2015. Prior to joining us, Steven served in
a variety of executive positions at Simpata, Inc., a venture capital backed internet startup in San Francisco, Enron, and BP/Amoco
Oil.
Jeffrey Dyck joined the Steel Manufacturing Business in February 1994 and served in a variety of positions, including Manager
of the Rolling Mills and Director of Operations of the Steel Manufacturing Business, before his promotion to President of SMB
in June 2005, and then Co-President of the Cascade Steel and Scrap business in June 2017.
96 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
Peter Saba joined us in July 2015 as Senior Vice President, General Counsel and Corporate Secretary. He is a member of the New
York State, District of Columbia and U.S. Supreme Court Bar, not admitted in Oregon State. Prior to joining us, Peter was the
Senior Vice President, General Counsel, Chief Compliance Officer and Corporate Secretary for Centrus Energy Corp. (formerly,
USEC, Inc.), a global energy company that enriches uranium for nuclear fuel, which he joined in 2008. USEC, Inc. filed a voluntary
petition for relief under Chapter 11 of the United States Bankruptcy Code in March 2014 and emerged from Chapter 11 as Centrus
Energy Corp. on September 30, 2014. Over a 30-year career, Peter has worked in leading international law firms focusing on
corporate and project finance, served as Chief Operating Officer and General Counsel at the Export-Import Bank of the United
States and as the Principal Deputy Assistant Secretary for Domestic and International Energy Policy at the U.S. Department of
Energy, and taught international business transactions as an Adjunct Professor at Georgetown Law School.
Stefano Gaggini joined us in July 2011 as Senior Manager of SEC Reporting and Technical Accounting and became Director of
SEC Reporting and Technical Accounting in March 2012. He became Vice President, Corporate Controller and Principal
Accounting Officer in December 2013. Prior to joining Schnitzer, Mr. Gaggini was a senior manager at KPMG LLP, where he
served in various auditing roles since 1998 in the Portland, Oregon and Zurich, Switzerland offices. He is licensed as a Certified
Public Accountant in the State of Oregon.
Code of Ethics
On April 27, 2017, the Board of Directors approved a revised Company’s Code of Conduct that is applicable to all of its directors
and employees. It includes additional provisions that apply to the Company’s principal executive officer, principal financial officer,
principal accounting officer or controller, and persons performing similar functions (the “Senior Financial Officers”). This
document is posted on the Corporate Governance page of the Company’s internet website (www.schnitzersteel.com) and is available
free of charge by calling the Company or submitting a request to ir@schn.com. The Company intends to satisfy its disclosure
obligations with respect to any amendments to or waivers of the Code for directors, executive officers or Senior Financial Officers
by posting such information on its internet website set forth above rather than by filing a Form 8-K.
ITEM 11. EXECUTIVE COMPENSATION
The information required by Items 402, 407(e)(4) and 407(e)(5) of Regulation S-K will be included under “Compensation of
Executive Officers,” “Compensation Discussion and Analysis”, “Director Compensation”, “Corporate Governance – Assessment
of Compensation Risk” and “Compensation Committee Report” in the Company’s Proxy Statement to be filed for its 2018 Annual
Meeting of Shareholders and is incorporated herein by reference.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED
STOCKHOLDER MATTERS
Information with respect to security ownership of certain beneficial owners and management, as required by Item 403 of Regulation
S-K, will be included under “Voting Securities and Principal Shareholders” in the Company’s Proxy Statement for its 2018 Annual
Meeting of Shareholders and is incorporated herein by reference. Information with respect to securities authorized for issuance
under equity compensation plans, as required by Item 201(d) of Regulation S-K, will be included under “Compensation Plan
Information” in the Company’s Proxy Statement for its 2018 Annual Meeting of Shareholders and is incorporated herein by
reference.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by Items 404 and 407(a) of Regulation S-K will be included under “Certain Transactions” and “Corporate
Governance – Director Independence” in the Company’s Proxy Statement for its 2018 Annual Meeting of Shareholders and is
incorporated herein by reference.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
Information regarding the Company’s principal accountant fees and services required by Item 9(e) of Schedule 14A will be included
under “Independent Registered Public Accounting Firm” in the Company’s Proxy Statement for its 2018 Annual Meeting of
Shareholders and is incorporated herein by reference.
97 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) 1 The following financial statements are filed as part of this report:
PART IV
The Report of Independent Registered Public Accounting Firm, the Company’s Consolidated Financial Statements,
the Notes thereto and the quarterly financial data (unaudited) are on pages 52 through 93 of this report.
2 The following financial statement schedule is filed as part of this report:
Schedule II Valuation and Qualifying Accounts is on page 94 of this report.
All other schedules are omitted as the information is either not applicable or is not required.
3 The following exhibits are filed as part of this report:
3.1
2006 Restated Articles of Incorporation (as corrected December 2, 2011) of the Registrant. Filed as Exhibit 3.1
to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended November 30, 2011, and incorporated
herein by reference.
3.2 Restated Bylaws of the Registrant. Filed as Exhibit 3.1 to the Registrant’s Current Report on Form 8-K filed on
December 13, 2013, and incorporated herein by reference.
10.1 Lease Agreement, dated September 1, 1988, between Schnitzer Investment Corp. and the Registrant, as amended,
relating to the Portland Metals Recycling operation and which has terminated except for surviving indemnity
obligations. Filed as Exhibit 10.3 to the Registrant’s Registration Statement on Form S-1 filed on September 24,
1993 (Commission File No. 33-69352), and incorporated herein by reference.
10.2 Purchase and Sale Agreement, dated May 4, 2005, between Schnitzer Investment Corp. and the Registrant, relating
to purchase by the Registrant of the Portland Metals Recycling operations real estate. Filed as Exhibit 10.1 to the
Registrant’s Current Report on Form 8-K filed on May 10, 2005, and incorporated herein by reference.
10.3 Third Amended Shared Services Agreement, dated July 26, 2006, between the Registrant, Schnitzer Investment
Corp. and Island Equipment Company, Inc. Filed as Exhibit 10.5 to the Registrant’s Current Report on Form 8-
K filed on July 28, 2006, and incorporated herein by reference.
10.4 Third Amended and Restated Credit Agreement dated as of April 6, 2016 among Schnitzer Steel Industries,
Inc., as the US Borrower, and Schnitzer Steel Canada Ltd., as a Canadian Borrower, Bank of America, N.A., as
Administrative Agent, and the other Lenders party thereto. Filed as Exhibit 10.1 to the Registrant’s Quarterly
Report on Form 10-Q for the quarter ended February 29, 2016, and incorporated herein by reference.
10.5 Security Agreement dated as of April 6, 2016 among Schnitzer Steel Industries, Inc., the other Grantor's party
thereto and Bank of America, N.A., as Administrative Agent. Filed as Exhibit 10.2 to the Registrant’s
Quarterly Report on Form 10-Q for the quarter ended February 29, 2016, and incorporated herein by reference.
10.6 General Security Agreement dated as of April 6, 2016 between Schnitzer Steel Canada Ltd. and Bank of
America, N.A., as Collateral Agent. Filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q
for the quarter ended February 29, 2016, and incorporated herein by reference.
*10.7 Amended Executive Annual Bonus Plan. Filed as Appendix A to the Registrant’s Annual Proxy Report on Form
DEF 14A filed on December 17, 2014, and incorporated herein by reference.
*10.8 Annual Incentive Compensation Plan, effective September 1, 2006. Filed as Exhibit 10.1 to the Registrant’s
Quarterly Report on Form 10-Q for the quarter ended February 28, 2007, and incorporated herein by reference.
*10.9
1993 Stock Incentive Plan of the Registrant as Amended and Restated on November 7, 2013. Filed as Appendix
A to the Registrant’s Definitive Proxy Statement filed on December 18, 2013, and incorporated herein by reference.
98 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
*10.10 Form of Deferred Stock Unit Award Agreement under the 1993 Stock Incentive Plan used for non-employee
directors. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on July 28, 2006, and
incorporated herein by reference.
*10.11 Deferred Compensation Plan for Non-Employee Directors. Filed as Exhibit 10.2 to the Registrant’s Current Report
on Form 8-K filed on July 28, 2006, and incorporated herein by reference.
*10.12 Summary Sheet for 2017 Non-Employee Director Compensation. Filed as Exhibit 10.1 to the Registrant's
Quarterly Report on Form 10-Q for the quarter ended February 28, 2017, and incorporated herein by reference.
*10.13 Amended and Restated Supplemental Executive Retirement Bonus Plan of the Registrant effective January 1,
2009. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended May 31,
2009, and incorporated herein by reference.
*10.14 Form of Change in Control Severance Agreement between the Registrant and executive officers other than Tamara
L. Lundgren and used for agreements entered into prior to 2011. Filed as Exhibit 10.1 to the Registrant’s Current
Report on Form 8-K filed on May 5, 2008, and incorporated herein by reference.
*10.15 Form of Change in Control Severance Agreement between the Registrant and executive officers and used for
agreements entered into between 2011 and 2014. Filed as Exhibit 10.19 to the Registrant's Annual Report on
Form 10-K filed October 29, 2013 and incorporated herein by reference.
*10.16 Form of Change in Control Severance Agreement between the Registrant and executive officers and used for
agreements entered into after 2014. Filed as Exhibit 10.16 to the Registrant's Annual Report on Form 10-K
filed October 27, 2015, and incorporated herein by reference.
*10.17 Amended and Restated Employment Agreement by and between the Registrant and Tamara L. Lundgren dated
October 29, 2008. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on November 4,
2008, and incorporated herein by reference.
*10.18 Amendment No. 1 dated June 29, 2011 to Amended and Restated Employment Agreement by and between the
Registrant and Tamara L. Lundgren dated October 29, 2008. Filed as Exhibit 10.1 to the Registrant’s Quarterly
Report on Form 10-Q for the quarter ended May 31, 2011 and incorporated herein by reference.
*10.19 Amendment No. 2 dated July 25, 2017 to Amended and Restated Employment Agreement by and between the
Registrant and Tamara L. Lundgren dated October 29, 2008.
*10.20 Amended and Restated Change in Control Severance Agreement by and between the Registrant and Tamara L.
Lundgren dated October 29, 2008. Filed as Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed on
November 4, 2008, and incorporated herein by reference.
*10.21 Form of Indemnification Agreement for Directors and certain officers used for agreements entered into prior to
2016. Filed as Exhibit 10.3 to the Registrant’s Current Report on Form 8-K filed on July 28, 2006, and incorporated
herein by reference.
*10.22 Form of Indemnification Agreement for Directors and certain officers used for agreements entered into after 2015.
Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on May 3, 2016, and incorporated
herein by reference.
*10.23 Amended and Restated Employment Agreement by and between the Registrant and John D. Carter dated June
29, 2011. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended May 31,
2011 and incorporated herein by reference.
*10.24 Amendment No. 1 dated November 6, 2012 to the Amended and Restated Employment Agreement by and between
the Registrant and John D. Carter dated June 29, 2011. Filed as Exhibit 10.3 to the Registrant’s Quarterly Report
on Form 10-Q for the quarter ended November 30, 2012 and incorporated herein by reference.
*10.25 Amendment No. 2 dated October 29, 2014 to the Amended and Restated Employment Agreement by and between
the Registrant and John D. Carter dated June 29, 2011.
99 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
*10.26 Form of Restricted Stock Unit Award Agreement under the 1993 Stock Incentive Plan used for award to chief
executive officer on October 28, 2015. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-
Q for the quarter ended November 30, 2015 and incorporated herein by reference.
*10.27 Form of Restricted Stock Unit Award Agreement under the 1993 Stock Incentive Plan used for awards granted
after fiscal 2012 through the first half of fiscal 2016. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report
on Form 10-Q for the quarterly period ended November 30, 2012 and incorporated herein by reference.
*10.28 Form of Restricted Stock Unit Award Agreement under the 1993 Stock Incentive Plan used for awards granted
after the first half of fiscal 2016. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the
quarter ended May 31, 2016 and incorporated herein by reference.
*10.29 Form of Restricted Stock Unit Award Agreement under the 1993 Stock Incentive Plan used for award to certain
employees on November 1, 2016. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for
the quarter ended November 30, 2016 and incorporated herein by reference.
*10.30 Form of Long-Term Incentive Award Agreement under the 1993 Stock Incentive Plan used for awards granted in
first half of fiscal 2016. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly
period ended November 30, 2015 and incorporated herein by reference.
*10.31 Form of Long-Term Incentive Award Agreement under the 1993 Stock Incentive Plan used for awards granted in
second half of fiscal 2016. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly
period ended May 31, 2016 and incorporated herein by reference.
*10.32 Form of Long-Term Incentive Award Agreement under the 1993 Stock Incentive Plan used for awards granted in
first half of fiscal 2017. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly
period ended November 30, 2016 and incorporated herein by reference.
*10.33 Form of Long-Term Incentive Award Agreement under the 1993 Stock Incentive Plan used for awards granted in
second half of fiscal 2017. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly
period ended May 31, 2017 and incorporated herein by reference.
*10.34 Fiscal 2016 Annual Performance Bonus Program for Tamara L. Lundgren. Filed as Exhibit 10.3 to the Registrant’s
Quarterly Report on Form 10-Q for the quarterly period ended November 30, 2015 and incorporated herein by
reference.
*10.35 Amendment No. 1 to Fiscal 2016 Annual Performance Bonus Program for Tamara L. Lundgren. Filed as Exhibit
10.5 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended February 28, 2016 and
incorporated herein by reference.
*10.36 Fiscal 2017 Annual Performance Bonus Program for Tamara L. Lundgren. Filed as Exhibit 10.3 to the Registrant’s
Quarterly Report on Form 10-Q for the quarterly period ended November 30, 2016 and incorporated herein by
reference.
21.1 Subsidiaries of Registrant.
23.1 Consent of Independent Registered Public Accounting Firm.
24.1 Powers of Attorney.
31.1 Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2 Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1 Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906
of the Sarbanes-Oxley Act of 2002.
32.2 Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906
of the Sarbanes-Oxley Act of 2002.
100 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
101 The following financial information from Schnitzer Steel Industries, Inc.’s Annual Report on Form 10-K for the
year ended August 31, 2017, formatted in XBRL (eXtensible Business Reporting Language): (i) Consolidated
Statements of Operations for the years ended August 31, 2017, 2016 and 2015, (ii) Consolidated Balance Sheets
as of August 31, 2017 and August 31, 2016, (iii) Consolidated Statements of Comprehensive Income (Loss) for
the years ended August 31, 2017, 2016 and 2015, (iv) Consolidated Statements of Cash Flows for the years ended
August 31, 2017, 2016 and 2015, and (v) the Notes to Consolidated Financial Statements.
*Management contract or compensatory plan or arrangement.
The agreements and other documents filed as exhibits to this report are not intended to provide factual information or other
disclosure other than with respect to the terms of the agreements or other documents themselves, and you should not rely on them
for that purpose. In particular, any representations and warranties made by us in these agreements or other documents were made
solely within the specific context of the relevant agreement or document and may not describe the actual state of affairs as of the
date they were made or at any other time.
101 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
ITEM 16. FORM 10-K SUMMARY
None.
102 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this
report to be signed on its behalf by the undersigned, thereunto duly authorized.
SIGNATURES
Dated: October 24, 2017
SCHNITZER STEEL INDUSTRIES, INC.
/s/ RICHARD D. PEACH
By:
Richard D. Peach
Senior Vice President, Chief Financial Officer
and Chief of Corporate Operations
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons
on behalf of the registrant on October 24, 2017 in the capacities indicated.
Signature
Title
Principal Executive Officer:
/s/ TAMARA L. LUNDGREN
President and Chief Executive Officer and Director
Tamara L. Lundgren
Principal Financial Officer:
/s/ RICHARD D. PEACH
Richard D. Peach
Principal Accounting Officer:
/s/ STEFANO GAGGINI
Stefano Gaggini
Directors:
*DAVID J. ANDERSON
David J. Anderson
*JOHN D. CARTER
John D. Carter
*WAYLAND R. HICKS
Wayland R. Hicks
*DAVID L. JAHNKE
David L. Jahnke
Senior Vice President, Chief Financial Officer and Chief of Corporate Operations
Vice President, Corporate Controller and Principal Accounting Officer
Director
Director
Director
Director
103 / Schnitzer Steel Industries, Inc. Form 10-K 2017
Table of Contents
Signature
*JUDITH A. JOHANSEN
Judith A. Johansen
*WILLIAM D. LARSSON
William D. Larsson
*MICHAEL SUTHERLIN
Michael Sutherlin
*By:
/s/ RICHARD D. PEACH
Attorney-in-fact, Richard D. Peach
Title
Director
Director
Director
104 / Schnitzer Steel Industries, Inc. Form 10-K 2017