UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
____________________________________________________________
FORM 10-K
____________________________________________________________
☒ ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934
For the year ended September 30, 2022
or
☐ TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
For the transition period from to
Commission File Number 001-37860
____________________________________________________________
VAREX IMAGING CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
(State or other jurisdiction of
incorporation or organization)
1678 S. Pioneer Road, Salt Lake City, Utah
(Address of principal executive offices)
81-3434516
(I.R.S. Employer
Identification Number)
84104
(Zip Code)
Securities registered pursuant to Section 12(b) of the Act:
(801) 972-5000
(Registrant’s telephone number, including area code)
____________________________________________________________
Title of each class
Common Stock
Trading Symbol(s)
Name of each exchange on which registered
VREX
The Nasdaq Global Select Market
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No ý
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No ý
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. Yes ý No ¨
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405
of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit
such files). Yes ý No ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or
an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging
growth company” in Rule 12b-2 of the Exchange Act.
Large Accelerated filer
Non-Accelerated filer
☒
☐
Accelerated filer
Smaller reporting company
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for
complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
☐
☐
☐
☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal
control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that
prepared or issued its audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒
As of April 1, 2022, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of shares of
the registrant’s common stock held by non-affiliates of the registrant (based upon the closing sale price of such shares on the NASDAQ Global Select
Market on April 1, 2022) was approximately $610.2 million. Shares of the registrant’s common stock held by the registrant’s executive officers and
directors and by each entity that owned 10% or more of the registrant’s outstanding common stock have been excluded in that such persons may be
deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of November 8, 2022, there were 40.1 million shares of the registrant’s common stock outstanding.
Portions of registrant’s proxy statement relating to registrant’s 2023 annual meeting of stockholders are incorporated by reference in Part III of this
annual report on Form 10-K.
Documents Incorporated by Reference
VAREX IMAGING CORPORATION
INDEX
Part I.
Financial Information
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
Part II.
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
Item 9C.
Part III.
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
Part IV.
Item 15.
Item 16.
Business
Risk Factors
Unresolved Staff Comments
Properties
Legal Proceedings
Mine Safety Disclosures
Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of
Equity Securities
[Reserved]
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures about Market Risk
Financial Statements and Supplementary Data
Changes in and Disagreements with Accountants on Accounting and Financial Disclosures
Controls and Procedures
Other Information
Disclosures Regarding Foreign Jurisdictions that Prevent Inspections
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships and Related Transactions, and Director Independence
Principal Accountant Fees and Services
Exhibits and Financial Statement Schedules
Form 10-K Summary
Signatures
3
3
13
37
37
37
37
38
38
38
39
47
47
47
48
50
50
50
50
50
50
51
51
52
52
54
55
1
Table of Contents
Forward-Looking Statements
This Annual Report on Form 10-K (this “Annual Report”), including the section entitled “Management’s Discussion and
Analysis of Financial Condition and Results of Operations” (“MD&A”) contains “forward-looking” statements within the meaning of
the Private Securities Litigation Reform Act of 1995, which provides a "safe harbor" for statements about future events, products and
financial performance that are based on the beliefs of, estimates made by, and information currently available to the management of
Varex Imaging Corporation (“we,” “our,” “us,” the “Company,” “Varex,” or “Varex Imaging”). Actual results and the outcome or
timing of certain events described in these forward-looking statements are subject to risk and uncertainties and may differ significantly
from those projected in these forward-looking statements. Important factors that could cause our actual results and financial condition
to differ significantly from those projections or expectations include, among other things, the risks described in the Summary of
Principal Risk Factors below and further described in the Risk Factors listed under Part I, Item 1A of this Annual Report, MD&A and
other factors described from time to time in our other filings with the U.S. Securities and Exchange Commission (the “SEC”), or other
reasons.
Statements concerning: supply chain and logistic challenges; cost increases; the impact of the ongoing coronavirus
("COVID-19") pandemic on the global economy or the Company; the effects of inflation; industry or market segment outlook; market
acceptance of or transition to new products or technology such as advanced X-ray tube and digital flat panel detector products; growth
drivers; future orders, revenues, backlog, earnings or other financial results; and any statements using the terms “believe,” “expect,”
“anticipate,” “can,” “should,” “would,” “could,” “estimate,” “may,” “intended,” “potential,” and “possible” or similar statements are
forward-looking statements that involve risks and uncertainties that could cause our actual results and the outcome and timing of
certain events to differ materially from those projected or management’s current expectations.
Any forward-looking statement made in this Annual Report (including in any exhibits or documents incorporated by
reference) is based only on information currently available to Varex and its management and speaks only as of the date on which it is
made. We have not assumed any obligation to, and you should not expect us to, update or revise those statements because of new
information, future events or otherwise.
Summary of Principal Risk Factors
Investing in our common stock involves risks. See Item 1A. “Risk Factors” beginning on page 13 of this Annual Report for a
discussion of the following principal risks and other risks that make an investment in Varex speculative or risky:
•
•
•
Current economic conditions, including supply chain disruptions and logistical challenges, as well as uncertainty caused by
the military conflict between Russia and Ukraine, have increased our costs, impacted our ability to obtain materials needed to
manufacture products, and caused product delivery delays. These challenges and disruptions are likely to continue throughout
our 2023 fiscal year.
Our business and financial results may be adversely affected by the effects of inflation and the strong U.S. Dollar.
It has become more difficult to attract and retain employees, which has impacted, and is likely to continue to impact, our
ability to manufacture products.
• We sell products and services to a limited number of original equipment manufacturer (“OEM”) customers, many of which
are also competitors, and a reduction in or loss of business of one or more of these customers may materially reduce our sales.
• We may not be able to accurately predict customer demand for our products, which is subject to matters beyond our control.
• We compete in highly competitive markets, and we may lose business to our customers or other companies with greater
•
•
•
•
•
resources or the ability to develop more effective technologies, or we could be forced to reduce our prices.
Our success depends on the successful development, introduction, and commercialization of new generations of products and
enhancements to or simplifications of existing product lines.
Changes in import/export regulatory regimes and tariffs could continue to negatively impact our business.
A disruption at our manufacturing facilities, as well as fluctuating manufacturing costs, could materially and adversely affect
our business.
Our operations, cash flow, and financial position have been adversely impacted, and in the future could continue to be
adversely impacted by the COVID-19 pandemic and associated economic disruptions.
Our international manufacturing operations subject us to volatility and other risks, including high security risks, which could
result in harm to our employees and contractors or substantial costs.
• Warranty claims may materially and adversely affect our business.
•
Product defects or misuse may result in material product liability or professional errors and omissions claims, litigation,
investigation by regulatory authorities, or product recalls that could harm our future revenues and require us to pay material
uninsured claims.
Our competitive position would be harmed if we are not able to maintain our intellectual property rights and protecting our
intellectual property can be costly.
•
2
Table of Contents
•
•
•
Disruption of critical information systems or material breaches in the security of our systems may materially and adversely
affect our business and customer relations.
Compliance with laws and regulations across the globe applicable to the marketing, manufacture, and distribution of our
products may be costly, and failure to comply may result in significant penalties and other harm to our business.
Conversion of our Convertible Notes may dilute the ownership interest of our stockholders or may otherwise depress the
market price of our common stock.
• We have significant debt obligations that could adversely affect our business, profitability and ability to meet our obligations.
Our Asset-Based Loan credit facility and our indentures impose significant operating and financial restrictions that may limit
•
current and future operating flexibility, and make it difficult to respond to economic or industry changes or to take certain
actions, which could harm our long-term interest.
Potential indemnification liabilities to Varian Medical Systems, Inc., a Siemens Healthineers Company ("Varian"), could
materially and adversely affect our business, financial condition, results of operations, and cash flows.
•
Item 1. Business
Overview
PART I
Varex Imaging Corporation is a leading innovator, designer and manufacturer of X-ray components including tubes, digital
detectors, linear accelerators, image software processing solutions and stand-alone x-ray based systems in select application areas. Our
components are used in medical diagnostic imaging, security inspection systems, and industrial quality inspection systems, as well as
for analysis and measurement applications in industrial manufacturing applications. Global OEMs incorporate our X-ray imaging
components in their systems to detect, diagnose, protect, irradiate and inspect. Varex has approximately 2,300 full-time employees
located at engineering, manufacturing and service center sites in North America, Europe, and Asia.
Our products are sold in three geographic regions: the Americas, EMEA, and APAC. The Americas includes North America
(primarily the United States) and Latin America. EMEA includes Europe, Russia, the Middle East, India and Africa. APAC includes
Asia (other than India) and Australia. Revenues by region are based on the known final destination of products sold.
Our success depends, among other things, on our ability to anticipate and respond to changes in our markets, the direction of
technological innovation and the demand from our customers. We continually invest in research and development and employ
approximately 300 individuals in product development related activities. Our focus on innovation and product performance along with
strong and long-term customer relationships allows us to collaborate with our customers to bring industry-leading products to the X-
ray imaging market. We continue to work to improve the life and quality of our imaging components and leverage our scale as one of
the largest independent X-ray imaging component suppliers to provide cost-effective solutions for our customers.
Operating Segments and Products
We have two reportable operating segments: Medical and Industrial. The segments align our products and service offerings
with customer use in medical and industrial markets.
Medical
In our Medical segment, we design, manufacture, sell and service X-ray imaging components, including X-ray tubes, digital
detectors, high voltage connectors, image-processing software and workstations, 3D reconstruction software, computer-aided
diagnostic software, collimators, automatic exposure control devices, generators, and heat exchangers. These components are used in a
range of medical imaging applications including CT, mammography, oncology, cardiac, surgery, dental, and other diagnostic
radiography uses.
Our X-ray imaging components are primarily sold to OEM customers. These OEM customers then design-in our products
into their X-ray imaging systems for a variety of medical modalities. A substantial majority of medical X-ray imaging OEMs globally
are our customers, and many of these have been our customers for over 25 years. We believe one of the reasons for customer loyalty is
that our hardware and software products are tightly integrated with our customers' systems. We work very closely with our customers
to create custom built components for their systems based on technology platforms that we have developed. Because our products are
often customized for our customers' specific equipment, it can be costly and complex for our customers to switch to another provider.
Once our components are designed into our customers' equipment, our customers will typically continue to buy from us for any
replacement components and for service and support for that equipment. Some of our products are also included in product
3
Table of Contents
registrations for our customers' equipment that require regulatory approval to change. In addition to sales to OEM customers, we sell
our products to independent service companies and distributors as well as directly to end-users for replacement purposes.
We are one of the largest global manufacturers of X-ray imaging components and each year we produce over 28,000 X-ray
tubes and 20,000 X-ray detectors. We estimate that our world-wide installed base of products includes more than 160,000 X-ray tubes,
170,000 X-ray detectors, 600,000 connect and control components and 16,000 software instances. Replacement and service of our
existing installed base makes up a significant portion of our revenue. Many of our components need to be replaced regularly
depending upon usage and other factors. For example, CT X-ray tubes generally need to be replaced every 2 to 6 years. In China, the
replacement cycle for CT X-ray tubes currently can be as frequent as every 10 to 20 months due to high utilization of imaging
equipment. Other products such as X-ray detectors have a useful life of as much as 7 years or more, but can require more frequent
service and repairs during their useful life. In addition, our detector customers often elect to upgrade products to newer technology
before the end of a current product’s useful life. X-ray imaging software is a relatively small part of our business and includes
maintenance revenue for software licenses.
The COVID-19 pandemic had a significant effect on hospitals, clinics and outpatient imaging centers as they encountered
declines in elective procedures volume. As a result, they reduced the capital purchases of imaging equipment from OEMs, which led
to lower demand for X-ray imaging components for us. Additionally, equipment installations were delayed, due to reduced access to
healthcare institutions. Partially offsetting this was an increased demand for imaging equipment used to diagnose respiratory diseases,
such as radiographic X-ray imaging systems and CT imaging systems. The Company has experienced growth in demand for its
products as health systems globally have continued to address healthcare services gaps. However, the Company has not been able to
convert all the demand into sales due to on-going supply chain related interruptions and uncertainties, particularly with the availability
of micro-controller chips and other electronic components. As a result, uncertainty in overall sales volume is expected to continue at
least through the fiscal year 2023.
In China, the government is broadening the availability of healthcare services. As a result, the number of diagnostic X-ray
imaging systems, including CT, has grown significantly. We are developing CT X-ray tubes and related subsystems for Chinese
OEMs as they introduce new systems in China. Over the long-term, our objective is to become the partner of choice both for OEMs
and in the replacement market as CT systems become more widely adopted throughout the Chinese market.
In recent years our business in China has been impacted by the trade war with the United States in three principal ways: (1)
importing raw materials from China to the United States has become more expensive, (2) importing raw materials and sub-assemblies
from the United States to China has become more expensive, and (3) importing finished U.S. manufactured products into China has
become more difficult and expensive. While the governments of both the United States and China have granted tariff exclusions that
temporarily eliminate the additional duties payable for specific commodities, providing partial relief, these exclusions are temporary
and/or must be solicited and approved on a shipment-by-shipment basis. There is no guarantee that such exclusions will be granted or
extended by either government. In order to mitigate the impact of tariffs on materials imported from China, we have implemented
changes to secure more non-China sources of materials used to manufacture our X-ray imaging products. To help mitigate the impact
of tariffs on materials imported to China, and to be closer to our global customer base, we continue to expand manufacturing
capabilities at our facilities in China, Germany, the Netherlands and the Philippines. We have also implemented local sourcing
strategies to offer local content. This local-for-local strategy has been well received by both our local customers as well as global
OEMs, and acts as a natural hedge against trade wars and other potential supply chain disruptions.
Industrial
In our Industrial segment, we design, develop, manufacture, sell and service X-ray imaging products for use in a number of
markets, including security applications for cargo screening at ports and borders and baggage screening at airports, and nondestructive
testing, irradiation and inspection applications used in a number of other vertical markets. Our industrial products include Linatron®
X-ray linear accelerators, X-ray tubes, digital detectors and high voltage connectors. In addition, we license proprietary image-
processing and detection software designed to work with other Varex products to provide packaged sub-assembly solutions to our
industrial customers. Our Industrial business benefits from the research and development investment and manufacturing economies of
scale on the Medical side of our business, as we continue to find new applications for our technology. Along with more favorable
pricing dynamics, this allows us to generally achieve higher gross profit for industrial products relative to our Medical business. In
addition, our Industrial business benefits from our long-term service agreements for our Linatron® products.
The security market primarily consists of cargo security for the screening of trucks, trains, and cargo containers at ports and
borders as well as airport security for carry-on baggage, checked baggage and palletized cargo. The end customers for border
protection systems are typically government agencies, many of which are in oil-based economies and war zones where there can be
significant variation in buying patterns.
4
Table of Contents
Non-destructive testing and inspection verticals utilize X-ray imaging to scan items for inspection of manufacturing defects
and product integrity in a wide range of industries including the aerospace, automotive, electronics, oil and gas, food packaging, metal
castings and 3D printing industries. In addition, new applications for X-ray sources are being developed, such as sterilization of food
and its packaging. We provide X-ray sources, digital detectors, high voltage connectors and image processing software to OEM
customers, system integrators and manufacturers in a variety of these verticals. We believe that the non-destructive testing market
represents a significant growth opportunity for our business, and we are actively pursuing new potential applications for our products.
The economic downturn triggered by the COVID-19 pandemic reduced the demand for X-ray imaging equipment utilized in
the non-destructive testing market as manufacturers focused on cash preservation and reduced spending for capital equipment.
However, we have seen improved conditions in this market, which continued during the twelve months ended September 30, 2022.
Customers
Our customers are primarily large OEMs. Our top five customers, measured by revenue, are Canon Medical Systems
Corporation (“Canon”), United Imaging Healthcare, General Electric Company, Siemens Healthineers AG, and Elekta AB, which
collectively accounted for approximately 40% of total revenue in fiscal year 2022. Our largest customer, Canon, accounted for
approximately 17%, 18% and 21% of our total revenue for fiscal years 2022, 2021, and 2020, respectively, while our ten largest
customers as a group accounted for approximately 52%, 51% and 52% of our revenue for fiscal years 2022, 2021 and 2020,
respectively.
Competition
The imaging components market is highly competitive. OEMs may choose to develop and manufacture X-ray imaging
components in-house or they may choose to out-source to a supplier such as Varex or our competitors. Our success depends upon our
ability to anticipate changes in our markets, the direction of technological innovation and the demand from our customers. To remain
competitive, we must continually invest in research and development focused on innovation, improve product performance and
quality, and continue to reduce the cost of our imaging components. Significant capital investment is required to manufacture imaging
components. We believe we have sufficient manufacturing scale to leverage our high volume to reduce overall costs by spreading
fixed costs over more units.
Medical
We often compete with the in-house X-ray tube manufacturing operations of major diagnostic imaging systems companies,
which are the primary OEM customers for our Medical products. To effectively compete with these in-house capabilities, we must
have a competitive advantage in one or more significant areas, such as innovative technology and greater product performance, better
product quality, better product availability or lower product price. We sell a significant volume of our X-ray tubes to OEM customers
that have in-house X-ray tube production capability. In addition, we compete with some OEM customers, such as Canon, Philips
Healthcare and other companies who sell X-ray tubes to smaller OEMs and other manufacturers, such as Industria Applicazioni
Elettroniche S.p.A, as well as emerging X-ray tube manufacturers in China. High capital costs and mastery of complex manufacturing
processes that drive production yield and product life are significant characteristics of the X-ray tube business.
The market for digital detectors is highly competitive. We sell our digital detectors to a number of OEM customers that
incorporate our detectors into their medical diagnostic, oncology, 3D dental and veterinary imaging systems. Our amorphous silicon
based digital detector technology, our photon counting technology and our complementary metal-oxide-semiconductor technology
compete with other detector technologies, such as amorphous selenium, charge-coupled devices and variations of amorphous silicon
scintillators. We believe that our products provide a competitive advantage due to product quality and performance and lower total
cost of ownership over the product lifecycle. In the digital flat panel detector market, we primarily compete against Trixell S.A.S.,
Canon, Vieworks Co., Ltd., Hamamatsu Corporation, iRay Technology (Shanghai) Limited and Jiangsu CareRay Medical Systems
Co., Ltd.
Industrial
In the low-energy market of the Industrial segment, we compete with other OEM suppliers, such as iRay, Teledyne and
Comet AG. While there are other manufacturers of low-energy X-ray tubes and digital detectors for specialized and niche industrial
applications, our products are designed for a broad range of applications in inspection, analysis, and non-destructive testing. In the
high-energy market, we compete against technologies from Nuctech Company Limited, Siemens AG, ETM Electromatic Inc., and
PMB Alcen, whose X-ray sources are used in applications that include cargo and container scanning, border security, aerospace
applications, castings and pressure vessel inspections.
5
Table of Contents
Customer Services and Support
We generally warrant our products for 12 to 24 months. In certain cases, the warranty is specified by usage metrics such as
number of scans. We provide technical advice and consultation to major OEM customers from our U.S. offices in Utah, California,
Nevada, New York and Illinois; and internationally in the Philippines, China, the Netherlands, Germany, France, Sweden,
Switzerland, Finland, the United Kingdom, Italy and Japan. Our application specialists and engineers make recommendations to meet
the customer’s technical requirements within the customer’s budgetary constraints. We often develop specifications for a unique
product that will be designed and manufactured to meet a specific customer’s requirements.
Manufacturing and Supplies
We manufacture our products at facilities in Salt Lake City, Utah; Las Vegas, Nevada; Liverpool, New York; Franklin Park,
Illinois; Doetinchem, the Netherlands; Walluf and Bremen, Germany; Espoo, Finland; Calamba City, Philippines; and Wuxi, China.
These facilities employ state-of-the-art manufacturing techniques and several have been recognized by the press, governments and
trade organizations for their commitment to quality improvement. Each of these manufacturing facilities are certified by the
International Standards Organization (“ISO”) under ISO 9001 (for industrial products) or ISO 13485 (for medical devices). In
addition, we have a regional service center in Willich, Germany. The combined medical and industrial manufacturing infrastructure
enables us to leverage production scale to achieve productivity and low cost advantage as well as research and development synergies.
Manufacturing processes at our various facilities include machining, fabrication, subassembly, system assembly and final
testing. We have invested in various automated and semi-automated equipment for the fabrication and machining of the parts and
assemblies that we incorporate into our products. We may, from time to time, invest further in such equipment. Our quality assurance
program includes various quality control measures from inspection of raw materials, purchased parts and assemblies through in-line
inspection. In some cases, we outsource the manufacturing of sub-assemblies while still performing system design, final assembly and
testing in-house. In such cases, we believe outsourcing enables us to reduce or maintain fixed costs and capital expenditures, while
also providing the flexibility to increase production capacity. We purchase material and components from various suppliers that are
either standard products or customized to our specifications. Some of the components included in our products may be sourced from a
limited group of suppliers or from a single source supplier, such as the wave guides for linear accelerators; transistor arrays and
cesium iodide coatings for digital detectors and specialized integrated circuits, X-ray tube targets, housings, bearings and various other
components. We require certain raw materials, such as copper, nickel, silver, gold, lead, tungsten, iridium, rhenium, molybdenum,
rhodium, niobium, zirconium, and various high grades of steel alloy for X-ray tubes and industrial products. Worldwide demand,
availability and pricing of these raw materials have been volatile, and we expect that availability and pricing will continue to fluctuate
in the future.
Research and Development
Innovation and developing products, systems and services based on advanced technology is essential to our ability to compete
effectively in the marketplace. We maintain a research and development and engineering staff responsible for product design and
engineering.
Research and development are primarily conducted domestically at our facilities in Salt Lake City, Utah; San Jose,
California; Las Vegas, Nevada; Liverpool, New York; and Franklin Park, Illinois and internationally at our facilities in the
Netherlands, UK, Sweden, Finland and Germany. Our research and development activities are primarily focused on developing and
improving imaging component technology. Current X-ray source development areas include smaller footprint linear accelerators,
improvements to tube life and tube stability, reductions of tube noise and tube designs that will enable OEMs to continue to reduce
dose delivered, and improve image resolution, cost effectively. Research in digital detector imaging technology is aimed at developing
new panel technologies (such as photon counting) with better dose utilization, improved image quality and materials discrimination,
lower product costs and new image processing tools for advanced applications.
Industrial products share some of the same base technology competencies and platforms as medical products and our medical
and industrial development teams are therefore co-located in Salt Lake City, Utah; San Jose, California; Doetinchem, Netherlands;
Danderyd, Sweden; Espoo, Finland and Walluf, Germany. One of our competitive advantages is that some of the foundational
technologies and software components developed for medical applications may also be applicable in industrial components, and vice
versa. In addition to these product development synergies, we are also able to realize sourcing, production, service center, and logistics
synergies across the different products and market sectors.
6
Table of Contents
Product and Other Liabilities
Our business exposes us to potential product liability claims that are inherent in the manufacture, sale, installation, servicing
and support of X-ray imaging devices, related software and other devices that contain hazardous material or deliver radiation. Because
our products are involved in the intentional delivery of radiation to the human body and other situations where people may come in
contact with radiation (for example, when our Industrial products are being used to scan cargo) as well as the detection, planning and
treatment of medical problems, the possibility for significant injury or death exists if our products fail to work or are not used properly.
We may face substantial liability to patients, our customers and others for damages resulting from the faulty, or allegedly faulty,
design, manufacture, installation, servicing, support, testing or interoperability of our products and our customers’ products, or their
misuse or failure. We may also be subject to claims for property damages or economic loss related to or resulting from any errors or
defects in our products, or the installation, servicing and support of our products. Any accident or mistreatment could subject us to
legal costs, litigation, adverse publicity and damage to our reputation, whether or not our products or services were a factor. In
addition, if a product we design or manufacture were defective (whether due to design, labeling or manufacturing defects, improper
use of the product or other reasons), or found to be so by a regulatory authority, we may be required to correct or recall the product
and notify other regulatory authorities. We maintain limited product liability, professional liability and omissions liability insurance
coverage.
Government Regulation
U.S. Regulations
Laws governing marketing a medical device. In the United States, as a manufacturer and seller of medical devices and
devices emitting radiation or utilizing radioactive by-product material, we and some of our suppliers and distributors are subject to
extensive regulation by federal governmental authorities, such as the U.S. Food and Drug Administration (the “FDA”), the Nuclear
Regulatory Commission (“NRC”), and state and local regulatory agencies, to ensure the devices are safe and effective and comply
with laws governing products that emit, produce or control radiation. Similar international regulations apply overseas. These
regulations, which include the U.S. Food, Drug and Cosmetic Act (the “FDC Act”) and regulations promulgated by the FDA, govern,
among other things, the design, development, testing, manufacturing, packaging, labeling, distribution, import/export, sale and
marketing and disposal of medical devices, post market surveillance and reporting of serious injuries and death, repairs, replacements,
recalls and other matters relating to medical devices, radiation emitting devices and devices utilizing radioactive by-product material.
State regulations are extensive and vary from state to state. Our X-ray tube products, imaging workstations and flat panel detectors are
considered medical devices. Under the FDC Act, each medical device manufacturer must comply with quality system regulations that
are strictly enforced by the FDA.
Unless an exception applies, the FDA requires that the manufacturer of a new medical device or a new indication for use of,
or other significant change in, an existing currently marketed medical device obtain 510(k) pre-market notification clearance before it
can market or sell those products in the United States. The 510(k) clearance process is applicable when the device introduced into
commercial distribution is substantially equivalent to a legally marketed device. Obtaining the 510(k) clearance generally takes at least
six months from the date an application is filed, but could take significantly longer, and generally requires submitting supporting
testing data. After a product receives 510(k) clearance, any modifications or enhancements to a product that could significantly affect
its safety or effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, labeling,
packaging, or manufacturing process, may require a new 510(k) clearance. The FDA requires each manufacturer to make this
determination in the first instance, but the FDA can review any such decision. If the FDA disagrees with the manufacturer’s decision,
it may retroactively require the manufacturer to submit a request for 510(k) pre-market notification clearance and may require the
manufacturer to cease marketing and recall the product until 510(k) clearance is obtained. The FDA adopted guidance in September
2019 that we expect will increase the number and frequency of clearances for changes made to legally marketed devices. Most of our
products are non-classified or Class I medical devices, which do not require 510(k) clearance.
Quality systems. Our manufacturing operations for medical devices, and those of our third-party manufacturers, are required
to comply with the FDA’s Quality System Regulation (“QSR”), which addresses a company’s responsibility for product design,
testing, and manufacturing quality assurance, and the maintenance of records and documentation. The QSR requires that each
manufacturer establish a quality systems program by which the manufacturer monitors the manufacturing process and maintains
records that show compliance with FDA regulations and the manufacturer’s written specifications and procedures relating to the
devices. QSR compliance is necessary to receive and maintain FDA clearance or approval to market new and existing products. The
FDA makes announced and unannounced periodic and ongoing inspections of medical device manufacturers to determine compliance
with the QSR. If in connection with these inspections the FDA believes the manufacturer has failed to comply with applicable
regulations and/or procedures, it may issue observations that would necessitate prompt corrective action. If FDA inspection
observations are not addressed and/or corrective action is not taken in a timely manner and to the FDA’s satisfaction, the FDA may
issue a warning letter (which would similarly necessitate prompt corrective action) and/or proceed directly to other forms of
7
Table of Contents
enforcement action. Failure to respond timely to FDA inspection observations, a warning letter or other notice of noncompliance and
to promptly come into compliance could result in the FDA bringing enforcement action against us, which could include the total
shutdown of our production facilities, denial of importation rights to the United States for products manufactured in overseas locations
and denial of export rights for U.S. products and criminal and civil fines.
The FDA and the Federal Trade Commission (the “FTC”) regulate advertising and promotion of our products to ensure that
the claims we make are consistent with our regulatory clearances, that we have adequate and reasonable scientific data to substantiate
the claims and that our promotional labeling and advertising is neither false nor misleading. We may not promote or advertise our
products for uses not within the scope of our intended use statement in our clearances or approvals or make unsupported safety and
effectiveness claims.
It is also important that our products comply with electrical safety and environmental standards, such as those of
Underwriters Laboratories (“UL”), the Canadian Standards Association (“CSA”), and the International Electrotechnical Commission
(“IEC”). In addition, the manufacture and distribution of medical devices utilizing radioactive material requires a specific radioactive
material license. For the United States, manufacture and distribution of these radioactive sources and devices also must be in
accordance with a model-specific certificate issued by either the NRC or by an Agreement State. In essentially every country and state,
installation and service of these products must be in accordance with a specific radioactive materials license issued by the applicable
radiation control agency. Service of these products must be in accordance with a specific radioactive materials license. We are also
subject to a variety of additional environmental laws regulating our manufacturing operations and the handling, storage, transport and
disposal of hazardous substances, and which impose liability for the cleanup of any contamination from these substances.
Other applicable U.S. regulations. As a participant in the healthcare industry, we are also subject to extensive laws and
regulations protecting the privacy and integrity of patient medical information that we receive, including the Health Insurance
Portability and Accountability Act of 1996 (“HIPAA”), new state privacy laws, “fraud and abuse” laws and regulations, including
physician self-referral prohibitions, and false claims laws. From time to time, these laws and regulations may be revised or interpreted
in ways that could make it more difficult for our customers to conduct their businesses, such as recent proposed revisions to the laws
prohibiting physician self-referrals, and such revisions could have an adverse effect on the demand for our products, and therefore our
business and results of operations. We also must comply with numerous federal, state and local laws of more general applicability
relating to such matters as environmental protection, safe working conditions, manufacturing practices, fire hazard control and other
matters.
The laws and regulations and their enforcement are constantly undergoing change, and we cannot predict what effect, if any,
changes to these laws and regulations may have on our business. For example, national and state laws regulate privacy and may
regulate our use of data. Furthermore, HIPAA was amended by the Health Information Technology for Economic and Clinical Health
Act to provide that business associates who have access to patient health information provided by hospitals and healthcare providers
are now directly subject to HIPAA, including the associated enforcement scheme and inspection requirements.
Medicare and Medicaid Reimbursement
The federal and state governments of the United States establish guidelines and pay reimbursements to hospitals and free-
standing clinics for diagnostic examinations and therapeutic procedures under Medicare at the federal level and Medicaid at the state
level. Private insurers often establish payment levels and policies based on reimbursement rates and guidelines established by the
government.
The federal government and Congress review and adjust rates annually, and from time to time consider various Medicare and
other healthcare reform proposals that could significantly affect both private and public reimbursement for healthcare services in
hospitals and free-standing clinics. In the past, we have seen demand for our customers’ systems (in which our products are
incorporated) negatively impacted by the uncertainties surrounding reimbursement rates in the United States. State government
reimbursement for services is determined pursuant to each state’s Medicaid plan, which is established by state law and regulations,
subject to requirements of federal law and regulations.
Various healthcare reform proposals have also emerged at the state level, and we are unable to predict which, if any, of these
proposals will be enacted. In addition, it is possible that changes in federal health care law and policy could result in additional
proposals and/or changes to health care system legislation which could have a material adverse effect on our business. Uncertainty
created by healthcare reform complicates our customers’ decision-making process and, therefore, may impact our business.
The sale of medical devices, the referral of patients for diagnostic examinations and treatments utilizing such devices, and the
submission of claims to third-party payors (including Medicare and Medicaid) seeking reimbursement for such services, are subject to
various federal and state laws pertaining to healthcare “fraud and abuse.” Anti-kickback laws make it illegal to solicit, induce, offer,
receive or pay any remuneration in exchange for the referral of business, including the purchase of medical devices from a particular
manufacturer or the referral of patients to a particular supplier of diagnostic services utilizing such devices. False claims laws prohibit
8
Table of Contents
anyone from knowingly and willfully presenting, or causing to be presented, claims for payment to third-party payors (including
Medicare and Medicaid) that are false or fraudulent, for services not provided as claimed, or for medically unnecessary services. The
Office of the Inspector General prosecutes violations of fraud and abuse laws and any violation may result in criminal and/or civil
sanctions, including, in some instances, imprisonment and exclusion from participation in federal healthcare programs such as
Medicare and Medicaid, which may negatively impact the demand for our products.
Foreign Regulations
Our operations, sales and service of our products outside the United States are subject to regulatory requirements that vary
from country to country and may differ significantly from those in the United States. In general, our products are regulated outside the
United States as medical devices by foreign governmental agencies similar to the FDA.
Marketing a medical device internationally. For us to market our products internationally, we must obtain clearances or
approvals for products and product modifications. We are required to affix the CE mark to our products to sell them in member
countries of the European Union (“EU”). The CE mark is an international symbol of adherence to certain essential principles of safety
and effectiveness, which once affixed enables a product to be sold in member countries of the European Economic Area ("EEA"). The
CE mark is also recognized in many countries outside the EU and can assist in the clearance process. To receive permission to affix
the CE mark to our medical device products, we must obtain approvals and Quality System certification, e.g., ISO 13485, through an
accredited Notified Body and must otherwise have a quality management system that complies with the EU Medical Device Directive,
which was superseded by the EU MDR-Medical Device Regulations in May 2021. The ISO promulgates standards for certification of
quality assurance operations. We are certified as complying with the ISO 9001 for our security and inspection products and ISO 13485
for our medical devices. Several Asian countries, including Japan and China, have adopted regulatory schemes that are comparable,
and in some cases more stringent, than the EU scheme. To import medical devices into Japan, the requirements of the Japanese
Pharmaceutical and Medical Device Act must be met and an approval to sell medical products in Japan, must be obtained. Similarly, a
registration certification issued by the National Medical Products Administration and a China Compulsory Certification mark for
certain products are required to sell medical devices in China. Obtaining such certifications on our products can be time-consuming
and can cause us to delay marketing or sales of certain products in such countries. Similarly, prior to selling a device in Canada,
manufacturers of Class II devices must obtain a medical device license from Health Canada. Additionally, many countries have laws
and regulations relating to radiation and radiation safety that apply to our products. In most countries, radiological regulatory agencies
require some form of licensing or registration by the facility prior to acquisition and operation of an X-ray generating device or a
radiation source. The handling, transportation and recycling of radioactive metals and source materials are also highly regulated.
A number of countries, including the members of the EU, have implemented or are implementing regulations that would
require manufacturers to dispose, or bear certain disposal costs, of products at the end of a product’s useful life and restrict the use of
some hazardous substances in certain products sold in those countries. While these regulations could impose a future cost on the
Company, compliance programs are in place to anticipate or establish best estimates of what the potential exposure of such costs could
be should they arise.
Manufacturing and selling a device internationally. We are subject to laws and regulations outside the United States
applicable to manufacturers of radiation-producing devices and products utilizing radioactive materials, and laws and regulations of
general applicability relating to matters such as environmental protection, safe working conditions, manufacturing practices and other
matters, in each case that are often comparable to, if not more stringent than, regulations in the United States. In addition, our sales of
products in foreign countries are subject to regulation of matters such as product standards, packaging requirements, labeling
requirements, import restrictions, environmental and product recycling requirements, tariff regulations, and duties and tax
requirements. In some countries, we rely on our foreign distributors and agents to assist us in complying with foreign regulatory
requirements.
Other applicable international regulations. In addition to the U.S. laws regarding the privacy and integrity of patient medical
information, we are subject to similar or stricter laws and regulations in foreign countries covering data privacy and other protection of
health and employee information. Particularly within Europe, data protection legislation is comprehensive and complex and there has
been a recent trend toward more stringent enforcement of requirements regarding protection and confidentiality of personal data, as
well as enactment of stricter legislation. We are also subject to international “fraud and abuse” laws and regulations, as well as false
claims and misleading advertisement laws. We also must comply with numerous international laws of more general applicability
relating to such matters as environmental protection, safe working conditions, manufacturing practices, fire hazard control and other
matters.
Anti-Corruption Laws and Regulations
We are subject to the U.S. Foreign Corrupt Practices Act and anti-corruption laws, and similar laws in foreign countries, such
as the U.K. Bribery Act of 2010 and the law “On the Fundamentals of Health Protection in the Russian Federation”. In general, there
9
Table of Contents
is a worldwide trend to strengthen anti-corruption laws and their enforcement, and the healthcare industry and medical equipment
manufacturers have been particular targets of these investigation and enforcement efforts. Any violation of these laws by us or our
agents or distributors could create substantial liability for us, subject our officers and directors to personal liability and also cause a
loss of reputation in the market.
Transparency International’s 2021 Corruption Perceptions Index measured the degree to which public sector corruption is
perceived to exist in 180 countries/territories around the world and found that two-thirds of the countries in the index, including many
that we consider to be high-growth areas for our products, such as China and India, scored below 50, on a scale from 100 (very clean)
to 0 (highly corrupt). We currently operate in many countries where the public sector is perceived as being more or highly corrupt and
our strategic business plans include expanding our business in regions and countries that are rated as higher risk for corruption activity
by Transparency International.
Increased business in higher-risk countries could subject us and our officers and directors to increased scrutiny and increased
liability. In addition, becoming familiar with and implementing the infrastructure necessary to comply with laws, rules and regulations
applicable to new business activities and mitigating and protecting against corruption risks could be quite costly. Failure by us or our
agents or distributors to comply with these laws, rules and regulations could delay our expansion into high-growth markets and could
materially and adversely affect our business.
Competition and Trade Compliance Laws
We are subject to various competition and trade compliance laws in the jurisdictions where we operate. Regulatory or
government authorities where we operate may have enforcement powers that can subject us to sanctions and can impose changes or
conditions in the way we conduct our business. For example, local authorities may disagree with how we classify our products, and we
may be required to change our classifications, which could increase our operating costs or subject us to increased taxes or fines and
penalties. In addition, an increasing number of jurisdictions also provide private rights of action for competitors or consumers to seek
damages asserting claims of anti-competitive conduct. Increased government scrutiny of our actions or enforcement or private rights
of action could materially and adversely affect our business or damage our reputation. In addition, we may conduct, or we may be
required to conduct, internal investigations or face audits or investigations by one or more domestic or foreign government or
regulatory agencies, which could be costly and time-consuming, and could divert our management and key personnel from our
business operations. An adverse outcome under any such investigation or audit could subject us to increased costs, fines or criminal or
other penalties, which could materially and adversely affect our business and financial results. Furthermore, competition laws may
prohibit or increase the cost of future acquisitions that we may desire to undertake.
International sales of certain of our Linatron® X-ray accelerators are subject to U.S. export licenses that are issued at the
discretion of the U.S. government. Orders and revenues for our security and inspection products have been and may continue to be
unpredictable as governmental agencies may place large orders with us or with our customers over a short period of time and then may
not place additional orders until complete deployment and installation of previously ordered products. Furthermore, tender awards in
this business may be subject to challenge by third parties, as we have previously encountered, which can make the conversion of
orders to revenues unpredictable for some security and inspection products. The market for border protection systems has slowed
significantly and end customers, particularly in oil-based economies and war zones in which we have a significant customer base, are
delaying system deployments or tenders and have considered moving to alternative sources.
Intellectual Property
We place considerable importance on obtaining and maintaining patent, copyright and trade secret protection for significant
new technologies, products and processes, because of the length of time and expense associated with bringing new products through
the development process and to the marketplace.
We generally rely on a combination of patents, copyrights, trademarks, trade secret and other laws, and contractual
restrictions on disclosure, copying and transferring title, including confidentiality agreements with vendors, strategic partners, co-
developers, employees, consultants and other third parties, to protect our proprietary rights in the developments, improvements and
inventions that we have originated and which are incorporated in our products or that fall within our fields of interest. As of
September 30, 2022, we own approximately 260 patents issued in the United States, approximately 400 patents issued throughout the
rest of the world and have approximately 130 patent applications pending with various patent agencies worldwide. The patents issued
or issuing from the pending applications generally expire between 2022 and 2040. We intend to file additional patent applications as
appropriate. We have trademarks, both registered and unregistered, that are maintained and enforced to provide customer recognition
for our products in the marketplace. We also have agreements with third parties that provide for licensing of patented or proprietary
technology, including royalty-bearing licenses and technology cross-licenses. These licenses generally can only be terminated for
breach. See Item 1A. “Risk Factors - Risks Relating to our Intellectual Property and Information Systems.”
10
Table of Contents
In conjunction with the January 2017 separation from Varian Medical Systems, Inc. ("Varian"), we entered into an
Intellectual Property Matters Agreement with Varian, pursuant to which, among other things, we each granted the other licenses to use
certain intellectual property. Varian was subsequently acquired by Siemens in April of 2021.
Environmental Matters
Our operations and facilities, past and present, are subject to environmental laws, including laws that regulate the handling,
storage, transport and disposal of hazardous substances. Certain of those laws impose cleanup liabilities under certain circumstances.
In connection with those laws and certain of our past and present operations and facilities, we are obligated to indemnify Varian for
20% of the cleanup liabilities related to prior corporate restructuring activities while a division of Varian and fully indemnify Varian
for other liabilities arising from the operations of the business transferred to it as part of those activities. Those include facilities sold
as part of Varian’s electron devices business in 1995 and thin film systems business in 1997. The U.S. Environmental Protection
Agency (“EPA”) or third parties have named Varian as a potentially responsible party under the amended Comprehensive
Environmental Response Compensation and Liability Act of 1980 (“CERCLA”), at sites to which Varian or the facilities of the
businesses sold in 1995 and 1997 were alleged to have shipped waste for recycling or disposal (the “CERCLA sites”). We anticipate
that we will be obligated to reimburse Varian for 20% of the liabilities of Varian related to these CERCLA sites (after adjusting for
any insurance proceeds or tax benefits received by Varian). In connection with the CERCLA sites, to date Varian has been required to
pay only a small portion of the total cleanup costs and we anticipate that any reimbursement to Varian in the future will not be
material. As of September 30, 2022, we had an existing environmental liability of approximately $1.1 million, net of expected
insurance proceeds, related to the CERCLA sites.
Working Capital
Our working capital needs and our credit practices are comparable to those of other companies manufacturing and selling
similar products in similar markets. We endeavor to carry sufficient levels of inventory to meet the product delivery needs of our
customers. We also provide payment terms to customers in the normal course of business. The product warranty obligations contained
in our standard terms and conditions typically range from 12 to 24 months, depending on the product.
Human Capital Resources
Talent Management
To remain a leading innovator, designer, and manufacturer of critical components of X-ray based diagnostic equipment, it is
crucial that we continue to attract and retain exceptional talent. Our business results depend on our ability to successfully manage our
human capital resources, including attracting, identifying, and retaining key talent. Factors that may affect our ability to attract and
retain qualified employees include employee morale, our reputation, competition from other employers, wage inflation, the increasing
trend towards hybrid work environments, and availability of qualified individuals.
As of September 30, 2022, we had approximately 2,300 full-time and part-time employees worldwide. None of our
employees based in the United States are unionized or subject to collective bargaining agreements. Employees based in some foreign
countries may, from time to time, be represented by works councils or unions or subject to collective bargaining agreements. We
consider our relations with our employees to be good.
As part of our people management strategy, we monitor employee morale and our market reputation. To better understand
how to measure the effectiveness of our people management strategy, and to establish a baseline understanding of employee loyalty
and retention, we solicit feedback from our employees through employee satisfaction and other surveys. The results of these surveys
are analyzed, and we hold meetings with employees to share and discuss areas of improvement. We believe this is a useful process to
inform how future decisions are made in order to improve employee morale and engagement.
Total Rewards
We invest in our workforce by offering a competitive total rewards package that includes a combination of salaries and
wages, health and wellness benefits, equity incentives, retirement benefits, and educational benefits. We strive to offer a competitive
total rewards package that is responsive to local markets. In the United States, where our largest employee base resides, our benefits
for eligible employees have included:
Health insurance coverage available to full-time employees;
Tuition reimbursement up to a specified dollar amount on an annual basis;
•
•
• Matching contributions to a tax-qualified defined contribution savings ("401(k)") plan, on a dollar-for-dollar basis up to four
percent of the employee’s base compensation;
11
Table of Contents
•
•
An employee assistance program; and
Training and development programs designed to help employees improve workplace performance.
Approximately 90% of our eligible employees participate in our 401(k) plan, which positions us as a top performer among
similarly situated companies. In addition, in an effort to further align the interests of eligible employees with our stockholders, we
have an equity-based incentive plan that provides for the grant of nonqualified stock options and restricted stock units to directors,
officers and other eligible employees. Additionally, to create performance incentives and to encourage share ownership by our
employees, we have implemented an employee stock purchase plan, which enables eligible employees to purchase our common stock
at a discount through payroll contributions.
During fiscal year 2020, due to the impact of COVID-19 on our business, it was necessary to modify or freeze certain
benefits historically provided to our employees, such as 401(k) plan matching contributions and tuition reimbursements. During the
second half of fiscal year 2021, we reinstated both the 401(k) matching contributions and tuition reimbursement program.
Safety and Wellness
The health and safety of our workforce is fundamental to the success of our business. We provide our employees upfront and
ongoing safety training to ensure that safety policies and procedures are effectively communicated and implemented. Personal
protective equipment is provided to those employees where needed for the employee to safely perform their job function. We have
experienced personnel on site at each of our manufacturing locations that are tasked with environmental, health and personal safety
education and compliance and, in Salt Lake City, we have an onsite nurse practitioner available to our employees for medical needs.
The COVID-19 pandemic presented challenges for our workplace. Because our business involves the manufacture of
physical products, many of our employees were unable to work from home. In an effort to keep our employees safe and to maintain
operations during the COVID-19 pandemic, we implemented a number of health-related measures and incentivized our employees to
become vaccinated. In addition, we implemented a hybrid-office work program where certain employees could work a portion of the
workweek from a home office if approved by their leadership.
Diversity and Inclusion
As one of our values states, “we embrace equality,” and we are committed to a diverse and inclusive workplace that is
respectful to all. Some of our initiatives include providing scholarships to the Society of Women Engineers ("SWE") and science,
technology, engineering, and mathematics ("STEM") programs, regularly analyzing pay equity, and engaging in on-campus events
that increase our exposure to diverse populations to promote diversity in our hiring. We do not tolerate discrimination and harassment,
and we expect our teams to conduct themselves ethically at all times in accordance with Varex’s Code of Conduct.
Information Available to Investors
The Securities and Exchange Commission (“SEC”) maintains an internet site, www.sec.gov, that contains reports, proxy and
information statements, and other information regarding the Company and other issuers that file electronically with the SEC. As soon
as reasonably practicable after filing with or furnishing to the SEC, we also make the following reports and information available free
of charge on the Investors page of our website www.vareximaging.com:
•
•
•
•
•
our annual reports on Form 10-K;
quarterly reports on Form 10-Q;
current reports on Form 8-K (including any amendments to those reports);
proxy statements; and
Section 16 ownership reports.
Additionally, our Code of Conduct, Corporate Governance Guidelines and the charters of the Audit Committee,
Compensation and Management Development Committee, and Nominating and Corporate Governance Committee are also available
on the Investors page of our website. Investors and others should note that we announce material financial and operational information
to our investors using our investor relations website (https://www.vareximaging.com/investors/), press releases, SEC filings and public
conference calls and webcasts. Please note that information on, or that can be accessed through, our website is not deemed “filed” with
the SEC and is not to be incorporated by reference into any of our filings under the Securities Act of 1933, as amended (the “Securities
Act”), or the Securities Exchange Act of 1934, as amended (the “Exchange Act”).
12
Table of Contents
Executive Officers of the Registrant
The biographical summaries of our executive officers are as follows:
Sunny S. Sanyal, 58, has served as President, Chief Executive Officer, and Director since January 2017. Prior to the
separation of Varex from Varian, Sunny served as senior vice president and president of Varian’s Imaging Components business for
Varian since February 2014. Prior to joining Varian in 2014, Sunny was chief executive officer of T-System, a privately held company
providing information technology solutions and services to hospitals and urgent care facilities. He also served as president of
McKesson Provider Technologies, where he led the company to significant market expansion with its clinical software, medical
imaging technology, and services solutions. Sunny has held executive positions at GE Healthcare, Accenture, and IDX Systems. He
received a Master of Business Administration ("MBA") from Harvard Business School, a Master of Science in industrial engineering
from Louisiana State University, and a Bachelor of Engineering in electrical engineering from the University of Bombay.
Shubham Maheshwari, 51, has served as Chief Financial Officer ("CFO") since July 2020. Shubham (Sam) joined Varex
from SiFive, Inc., a leading provider of hardware and software solutions for developing RISC-V based processors and semiconductor
chips, where he served as CFO. Before SiFive, Sam served for six years as CFO, and later as CFO and COO, of Veeco Instruments
Inc. (Nasdaq: VECO), a manufacturer of semiconductor process equipment. Previous notable positions include Senior Vice President,
Finance for semiconductor company Spansion, Inc., where he helped lead the company through its restructuring and IPO in 2010, and
more than 10 years in various senior positions, including Vice President of M&A and Corporate Controller, at KLA-Tencor Corp., a
global semiconductor equipment company. Sam holds an MBA in Finance from Wharton, and a bachelor’s degree in chemical
engineering from the Indian Institute of Technology, Delhi.
Kimberley E. Honeysett, 51, has served as Chief Legal Officer since February 2022 and as Senior Vice President, General
Counsel, and Corporate Secretary since January 2017. Prior to the separation of Varex from Varian, Kim served as vice president and
assistant general counsel and assistant corporate secretary for Varian, where she advised Varian’s Board of Directors, executive
management and corporate functions, including business development, investor relations, human resources, information technology
and was responsible for corporate governance, general compliance matters, litigation and global subsidiary governance. Prior to
joining Varian in 2005, Kim served as group director, legal affairs at Siebel Systems, Inc., an enterprise software company, and as an
associate with the law firm Brobeck, Phleger & Harrison LLP. Kim holds a juris doctor degree from Cornell Law School and a
bachelor’s degree in communications from the University of California, Los Angeles.
Brian W. Giambattista, 63, has served as Senior Vice President, and General Manager - X-ray Detectors since May 2017 and
joined Varex after the acquisition of the PerkinElmer Medical Imaging business. He has over 30 years of experience in the industry,
having held various management and engineering roles at PerkinElmer and General Electric Company, and received his doctorate
degree in physics from the University of Virginia.
Andrew Hartmann, 60, has served as Senior Vice President, Medical Sales & Marketing since July 2018. Prior to joining
Varex he worked for a number of leading OEMs in various leadership roles, most recently as General Manager of the X-ray and
Ultrasound Business for Carestream Health, Inc., a worldwide provider of X-ray imaging systems, from April 2012 to June 2018.
Prior to Carestream, Andrew worked for Siemens Medical Solutions USA, Inc. (Siemens Healthineers), a leading medical technology
company, in sales and marketing roles both domestically in the United States and internationally for Siemens’ ultrasound business.
Prior to Siemens, he held leadership roles at Acuson Corp. (subsequently acquired by Siemens), including General Manager for
Acuson’s Australia and New Zealand business. Andrew received a Master of Business Administration (“EMBA”) from Ashridge
Business School in London, United Kingdom, and received a diploma in electronics from Sydney Technical College in Australia.
Mark S. Jonaitis, 61, has served as Senior Vice President and General Manager - X-Ray Sources since January 2017. Prior to
the separation of Varex from Varian, Mark served in various management positions at Varian, including most recently as vice
president and general manager, X-ray Tube Products and global manufacturing. Mark joined Varian’s predecessor, Varian Associates,
in 1983, where he served in various product and engineering positions. Mark received his Bachelor of Science in physics from the
University of Utah.
Item 1A. Risk Factors
The following risk factors and other information included in this Annual Report on Form 10-K should be carefully
considered. Although the risk factors described below are the ones management deems material, additional risks and uncertainties not
presently known to us or that we presently deem not material may also adversely affect our business operations. If any of the
following risks or additional risks and uncertainties actually occur, our business, operating results, and financial condition could be
adversely affected.
13
Table of Contents
Risks Relating to Our Business
Current economic conditions, including supply chain disruptions and logistical challenges, as well as the military conflict between
Russia and Ukraine, have increased our costs, and have impacted, and may in the future impact, our ability to obtain materials
needed to manufacture our products, to deliver those products to our customers, and otherwise adversely impact our financial
condition and results of operations.
Current economic conditions have had, and we believe will continue to have, an adverse impact on our manufacturing
capacity, supply chain and distribution systems. We have experienced, and continue to experience, difficulties in obtaining materials
used to build our products and these difficulties have impacted our ability to deliver finished products to our customers. We believe
that it will continue to be difficult to obtain certain materials throughout fiscal year 2023. We have used more of our inventory on hand
than we have used historically and are purchasing materials that are critical to our processes, often at higher costs. Shortages of
materials, particularly micro-controller chips and associated electronic components, have caused and may continue to cause, delays in
manufacturing products for our customers. In some cases, raw material shortages and delivery delays from our suppliers are
communicated to us with very little advanced warning, which has caused operational and customer order fulfillment challenges.
During fiscal year 2022, inventory levels increased due to uneven component flow, impacting our ability to finish products and
resulting in a higher inventory count. If our actions to mitigate such challenges are not successful, material shortages could cause us to
temporarily stop production of certain products. Production delays have had and could continue to have a material adverse effect on
our business and results of operations. For example, if we are unable to deliver products to our customers without unreasonable delay,
those customers may seek alternative suppliers or decide to in-source certain products. Further, our competitors with greater financial
resources may be better able to restructure their manufacturing and supply chains in response to geopolitical and economic trends and
thereby have a competitive advantage over us.
In addition to material shortages, supply chain logistics have become more challenging, could remain challenging, and result
in higher costs and efforts. Our ability to move unfinished goods and finished products around the world has been impacted by the
decreased availability of global transportation networks. We have been subject to price increases on both the components used to make
our products, and for moving unfinished goods and finished products across the globe. Increased freight charges and shipping delays
have also become more common during the pandemic and are expected to continue into the foreseeable future. If we are not able to
mitigate these price increases and/or raise prices for our products, our operations, cash flow, and financial position could be adversely
impacted. See Management’s Discussion and Analysis of Financial Condition and Results of Operations for more information
regarding the risks related to supply chain disruptions and logistical challenges on our business.
The escalation of geopolitical tensions and the military conflict between Russia and Ukraine have introduced further
uncertainty into the economic environment, which could impact our business. Although the length and impact of the ongoing military
conflict is highly unpredictable, the conflict in Ukraine could lead to market disruptions, including significant volatility in commodity
prices, credit and capital markets, as well as supply chain interruptions. Poor relations between the United States and Russia; sanctions
by the United States, European Union, and other countries against Russia; the response by Russia and other countries to these
sanctions; and any escalation of political tensions or economic instability in the area could have an adverse impact on our business, our
customers, and our suppliers. Further, our customers, suppliers, and other third parties with whom we do business may have staff,
operations, materials or equipment located in Ukraine or Russia, which could impact our supply chain, the services being provided to
us, or our financial condition or results of operations.
Our business and financial results may be adversely affected by the effects of sustained inflation and increased interest rates.
Inflation has the potential to adversely affect our liquidity, business, financial condition and results of operations by
increasing our overall cost structure, particularly if we are unable to achieve commensurate increases in the prices we charge our
customers. The existence of sustained inflation in the economy has resulted in, and may continue to result in, higher interest rates and
capital costs, increased shipping costs, supply shortages, increased costs of labor, weakening exchange rates and other similar effects.
As interest rates rise to address inflation or otherwise, we may experience further increases in capital and other costs. Further, changes
in monetary or other policies here and abroad to combat inflation may lead to an economic downturn in some of our markets.
Although we may take measures to mitigate the impact of this inflation, if these measures are not effective, our business, financial
condition, results of operations and liquidity could be materially adversely affected. Even if such measures are effective, the benefits
of such measures may not be realized until after the costs of inflation have been incurred.
We sell our products and services to a limited number of OEM customers, many of which are also our competitors, and a reduction
in or loss of business of one or more of these customers may materially reduce our sales.
We sell our products to a limited number of OEM customers, many of which are also our competitors with in-house X-ray
component manufacturing operations. We had one customer during fiscal year 2022 that accounted for 17% of our revenue. Our ten
largest customers as a group accounted for approximately 52%, 51% and 52% of our revenue for fiscal years 2022, 2021 and 2020,
respectively. Although we seek to broaden our customer base, we will continue to depend on sales to a relatively small number of
14
Table of Contents
major customers. Because we often take significant time to replace lost business, it is likely that our operating results would be
materially and adversely affected if one or more of our major OEM customers were to cancel, delay, or reduce orders in the future.
Furthermore, we generate significant accounts receivables from the sale of our products and the provision of services directly
to our major customers. If one or more of these customers were to cancel a product order or service contract (whether in accordance
with its terms or otherwise), become insolvent or otherwise be unable or fail to pay for our products and services, our operating results
and financial condition could be materially and adversely affected.
We may not be able to accurately predict the demand for our products by our customers.
End-user product demand, economic uncertainties, the COVID-19 pandemic, natural disasters, and other matters beyond our
control make it difficult for our customers to accurately forecast and plan future business activities; which makes it difficult for us to
accurately predict the demand for our products. Because the manufacture of our products requires some lead-time, changes in
customer purchasing forecasts have previously impacted our business, resulting in excess inventory and slowdowns in sales. Similar
inventory adjustments and slowdowns in sales are likely to occur in the future. Changes to customer forecasts can occur on short
notice. Our customers also face inherent competitive issues and new product introduction delays which can result in changes in
forecasts. The market and regulatory risks faced by our customers also ultimately impact our ability to forecast future business. Our
agreements for imaging components, such as our pricing agreement with Canon Medical Systems, may contain purchasing estimates
that are based on our customers’ historical purchasing patterns rather than firm commitments, and actual purchasing volumes under
the agreements may vary significantly from these estimates. The variation from forecasted purchasing volume may be due, in part, to
the increasing life of X-ray tubes, which can result in reduced demand for replacement X-ray tubes in ways we may not be able to
accurately forecast. Reductions in purchasing patterns have in the past and may in the future materially and adversely affect our
operating results. In the past, decreased economic activity associated with the COVID-19 pandemic had a significant negative impact
on the demand for our industrial products and a similar impact could occur again.
We compete in highly competitive markets, and we may lose business to our customers or other companies with greater resources
or the ability to develop more effective technologies, or we could be forced to reduce our prices.
We compete in a market characterized by rapidly-evolving technology, intense competition and pricing pressure. We often
compete with companies that have greater financial, marketing and other resources than us. Some of the major diagnostic imaging
systems companies, which are the primary OEM customers for our X-ray components, also manufacture X-ray components, including
X-ray tubes, for use in their own imaging systems products. We must compete with these in-house manufacturing operations for
business. If these customers manufacture a greater percentage of their components in-house or otherwise decrease purchases from
external sources, which may occur for a number of reasons, including a strong U.S. Dollar or a general economic slowdown, we could
experience reductions in purchasing volume by, or loss of, one or more of these customers. Such a reduction or loss may have a
material and adverse effect on our business. In addition, we compete against other stand-alone, independent X-ray tube manufacturers
for both the OEM business of major diagnostic imaging equipment manufacturers and the independent servicing business for X-ray
tubes.
The market for flat panel detectors is also very competitive, and we face intense competition from over a dozen smaller
competitors. As a result of these competitive dynamics, to effectively retain the business of our customers and compete with our
competitors we must have an advantage in one or more significant areas, such as lower product cost, better product quality and/or
superior technology and/or performance. We have made price concessions to maintain existing customers and attract new customers,
and may have to make additional price concessions in the future.
In our Industrial segment, we compete with other OEM suppliers primarily outside of the United States. The market for our
X-ray tube and flat panel products used for nondestructive testing in industrial applications is small and highly fragmented. Some of
our competitors outside of the United States may have resources and support from their governments that we do not, such as
preferences for local manufacturers, and may not be subject to the same trade compliance regulations as us. Therefore, our ability to
compete in certain high-growth markets may be limited compared to our competitors.
Our competitors could develop technologies and products that are more effective than those we currently use or produce or
that could render our products obsolete or noncompetitive. In addition, the timing of our competitors’ introduction of products into the
market could affect the market acceptance and sales of our products. Some competitors offer specialized products that provide, or may
be perceived by customers to provide, an advantage over our products. Also, some of our non-U.S. competitors may not be subject to
the same standards, regulatory and/or other legal requirements to which we are subject and, therefore, they could have a competitive
advantage in developing, manufacturing and marketing products and services. Any inability to develop, gain regulatory approval for
and supply commercial quantities of competitive products to the market as quickly and effectively as our competitors could limit
market acceptance of our products and reduce our sales. Any of these competitive factors could negatively and materially affect our
pricing, sales, revenues, market share and gross margins and our ability to maintain or increase our operating margins.
15
Table of Contents
Our success depends on the successful development, introduction, and commercialization of new generations of products and
enhancements to or simplifications of existing product lines.
We operate in a market characterized by rapid change and technological innovation, particularly with respect to flat panel
technology. Our customers use our products in their medical diagnostic, security, and industrial imaging systems, and we must
continually introduce new products at competitive costs while also improving existing products with higher quality, lower costs, and
increased features. To be successful, we must anticipate our customers’ needs and demands, as well as potential shifts in market
preferences. Our failure to do so has in the past resulted, and may in the future result, in the loss of customers and an adverse impact to
our financial performance. With a relatively strong U.S. Dollar, our ability to meet our international customers’ pricing expectations is
particularly challenging and may result in erosion of product margin and market share.
We have in the past spent, and in the future may need to spend, more time and money than we expect to develop, market and
introduce new products or enhancements, and, even if we succeed, we may not be able to recover all or a meaningful part of our
investment. Once introduced, new products may materially and adversely impact sales of our existing products or make them less
desirable or even obsolete, which could materially and adversely impact our revenues and operating results. In addition, certain costs,
including installation and warranty costs, associated with new products may be proportionately greater than the costs associated with
other products and may therefore disproportionately, materially, and adversely affect our gross and operating margins. If we are
unable to lower these costs over time, our operating results could be materially and adversely affected. Some of the electronic
components and integrated circuits used in our flat panel detectors are susceptible to discontinuance and obsolescence risks, which
may force us to incorporate newer generations of these components, resulting in unplanned additional R&D expenses, delays in the
launch of new products, supply disruptions, or inventory write downs.
Our ability to successfully develop and introduce new products and product enhancements and simplifications, and the
revenues and costs associated with these efforts, are affected by our ability to, among other things:
•
•
•
•
•
•
•
properly identify customer needs or long-term customer demands;
prove the feasibility of new products;
properly manage and control research and development costs;
limit the time required from proof of feasibility to routine production;
timely and efficiently comply with internal quality assurance systems and processes;
limit the timing and cost of regulatory approvals;
accurately predict and control costs associated with inventory overruns caused by the phase-in of new products and the phase-
out of old products;
price our products competitively and profitably, which can be particularly difficult with a strong U.S. Dollar;
•
• manufacture, deliver, and install our products in sufficient volumes on time and accurately predict and control costs
associated with manufacturing installation, warranty, and maintenance of the products;
appropriately manage our supply chain;
•
• manage customer acceptance and payment for products; and
•
anticipate, respond to, and compete successfully with competitors.
Furthermore, as discussed in greater detail elsewhere in this “Risk Factors” section, we cannot be sure that we will be able to
successfully develop, manufacture, or introduce new products or enhancements, the roll-out of which involves compliance with
complex quality assurance processes, including the Quality System Regulation of the U.S. Food and Drug Administration (“FDA”).
Failure to complete these processes timely and efficiently could result in delays that could affect our ability to attract and retain
customers or cause customers to delay or cancel orders, which would materially and adversely affect our revenues and operating
results.
More than half of our revenues are generated from customers located outside the United States, and economic, political, and other
risks associated with international sales and operations could materially and adversely affect our sales or make them less
predictable.
We conduct business globally. Revenues generated from customers located outside the United States accounted for
approximately 69%, 68% and 66% of our total revenues during fiscal years 2022, 2021, and 2020, respectively. As a result, we must
provide significant service and support globally. We intend to continue to expand our presence in international markets and expect to
expend significant resources in doing so. We cannot be sure that we will be able to meet our sales, service, and support objectives or
obligations in these international markets or recover our investment in these international markets. Our future results could be harmed
by a variety of factors, including:
16
Table of Contents
•
•
•
•
•
•
•
•
•
•
•
•
•
currency fluctuations, and in particular the strength of the U.S. Dollar (which is our functional and reporting currency)
relative to many currencies, which have and may in the future adversely affect our financial results and cause some customers
to delay purchasing decisions, move to in-sourcing supply, migrate to lower cost alternatives, or ask for additional discounts;
the longer payment cycles associated with many customers located outside the United States;
difficulties in interpreting or enforcing agreements and collecting receivables through many foreign countries’ legal systems;
changes in restrictions on trade between the United States and other countries or unstable regional political and economic
conditions;
changes in the political, regulatory, safety or economic conditions in a country or region;
the imposition by governments of additional taxes, tariffs, global economic sanctions programs, or other restrictions on
foreign trade such as the tariffs put into place by both China and the United States;
conflicts between countries, including the current military conflict between Russia and Ukraine, and related sanctions;
any inability to obtain required export or import licenses or approvals, including the inability to obtain required export
licenses during a U.S. government shutdown;
natural disasters and pandemics;
failure to comply with export laws and requirements, which may result in civil or criminal penalties and restrictions on our
ability to export our products, particularly our industrial linear accelerator products;
risks unique to the Chinese market, including import barriers and preferences for local manufacturers;
failure to obtain proper business licenses or other documentation or to otherwise comply with local laws and requirements
regarding marketing, sales, service, or any other business we conduct in a foreign jurisdiction, which may result in civil or
criminal penalties and restrictions on our ability to conduct business in that jurisdiction; and
difficulties in protecting our intellectual property in foreign countries.
Although our sales fluctuate from period to period, in recent years our international operations have represented a larger share
of our business. The more we depend on international sales, the more vulnerable we become to these factors.
COVID-19 has adversely impacted our operations, cash flow, and financial position, and in the future we could continue to be
adversely impacted by the aftermath of the COVID-19 pandemic and continuing economic disruptions.
The pandemic caused by the spread of COVID-19 adversely impacted our operations, cash flow, and financial position. The
pandemic created significant volatility, uncertainty and economic disruption that could continue into the future. In addition, in part due
to the COVID-19 pandemic, we have observed an overall tightening and increasingly competitive labor market, which has resulted in
increased wages offered by other employers and voluntary attrition of employees in the industry, making it more difficult to recruit,
hire, and retain talent. New or continuing outbreaks of COVID-19 could have a negative impact on our business, future operating
results, cash flows and financial condition. Local government lockdowns or prohibitions on travel could adversely affect our ability to
manufacture or sell our products or to provide service to our customers or to meet and build relationships with customers, suppliers, or
other third parties. For example, the Chinese government has closed, and may in the future close, our factory in China for extended
periods of time to combat COVID-19 infection rates in the region. Even though the effects of COVID-19 have been lessening, a
resurgence of COVID-19 or other infections variants could have an adverse impact on our operating results, cash flows and financial
condition. See Management’s Discussion and Analysis of Financial Condition and Results of Operations for more information
regarding the risks related to COVID-19 on our business.
Our business may suffer if we are not able to hire and retain qualified personnel.
Our future success depends, to a great degree, on our ability to retain, attract, expand, integrate, and train our management
team and other key personnel, such as qualified engineering, service, sales, marketing, and other staff. We compete for key personnel
with other medical equipment and software manufacturers and technology companies, as well as universities and research institutions.
Competition for qualified personnel has increased over the past years. Because this competition is intense, particularly in Utah, where
unemployment rates are relatively low, compensation-related costs could increase significantly. If we are unable to hire and train
qualified personnel, we may not be able to maintain or expand our business. Additionally, if we are unable to retain key personnel, we
may not be able to replace them readily or on terms that are reasonable, which also could hurt our business.
17
Table of Contents
A change in the percentage of our total earnings from international sales or additional changes in tax laws could increase our
effective tax rate.
Our effective tax rate is impacted by tax laws in both the United States and in foreign countries. Earnings from our
international subsidiaries are generally taxed at rates that differ from U.S. rates. A change in the percentage of our total earnings from
the international subsidiaries, a change in the mix of particular tax jurisdictions between the international subsidiaries, or a change in
currency exchange rates could cause our effective tax rate to increase. Furthermore, while U.S. tax reform imposed a current tax on
cumulative undistributed earnings, these earnings could also become subject to incremental foreign withholding or U.S. state taxes
should they actually be remitted to the United States, in which case our financial results could be materially and adversely affected.
Statutory changes included in proposed U.S. legislation, if passed, including interpretive guidance, could have a material
impact on income tax expense, the effective tax rate, or the value of deferred tax assets and liabilities. Changes in the valuation of our
deferred tax assets or liabilities, additional changes in tax laws or rates, changes in the interpretation of tax laws in other jurisdictions,
or other changes beyond our control could materially and adversely affect our financial position and results of operations.
We have entities in certain jurisdictions with cumulative net operating losses for which no income tax benefit can be recorded
due to full valuation allowance positions. There could be additional future losses in these and other jurisdictions that would negatively
impact our effective tax rate.
We may face additional risks from the acquisition or development of new lines of business.
From time to time, we may acquire or develop new lines of business. There are substantial risks and uncertainties associated
with new lines of business, particularly in instances where the markets are not fully developed or are ones we have not operated in
before. Risks include developing knowledge of and experience in the new business, recruiting market professionals, new types or
greater levels of liability exposure, increasing research and development expenditures, and developing and capitalizing on new
relationships with experienced market participants. This may mean significant investment and involvement of our senior management
to acquire or develop, then integrate, the business into our operations. Timelines for integration of new businesses may not be
achieved, and price and profitability targets may not prove feasible, as new products can carry lower gross margins than existing
products. External factors, such as compliance with regulations (including in the case of some evolving end-markets, fast-changing
regulatory developments and legal uncertainties), competitive alternatives, and shifting market preferences may also impact whether
implementation of a new business will be successful. Failure to manage these risks could have a material and adverse effect on our
business, results of operations, and/or financial condition.
In addition, some of our products are multi-purpose products designed and intended to be used by OEMs and end users for a
wide range of imaging and irradiation purposes including for use in new and emerging industries. Certain of these industries may be
subject to varying, inconsistent, and rapidly changing laws, regulations, administrative practices, enforcement approaches, judicial
interpretations, and consumer perceptions. The demand for our products may be negatively impacted depending on how laws,
regulations, administrative practices, enforcement approaches, judicial interpretations, and consumer perceptions develop, and we
cannot reasonably predict the nature of these developments or the effect, if any, that these developments could have on our business.
We may be unable to complete future acquisitions or realize expected benefits from acquisitions of or investments in new
businesses, products, or technologies, which could harm our business.
Our ability to identify and take advantage of attractive acquisitions or other business development opportunities is an
important component in implementing our overall business strategy. We must grow our business in response to changing technologies,
customer demands, and competitive pressures. In some circumstances, we may decide to grow our business through the acquisition of
complementary businesses, products, or technologies, rather than through internal development; however, there is no guarantee that
these acquisitions will be successful or that we will realize a return on our investment.
Identifying suitable acquisition candidates can be difficult, time consuming, and costly, and we may not be able to identify
suitable candidates or successfully complete or finance identified acquisitions, including as a result of failing to obtain regulatory or
competition clearances, which could impair our growth and ability to compete. In addition, completing an acquisition can divert our
management and key personnel from our current business operations, which could harm our business and affect our financial results.
Even if we complete an acquisition, we may not be able to successfully integrate newly-acquired organizations, products,
technologies, or employees into our operations or may not fully realize some of the expected synergies.
18
Table of Contents
Integrating an acquisition can also be expensive and time consuming and may strain our resources. It may cost us more to
commercialize new products than originally anticipated or cause us to increase our expenses related to research and development,
either of which could materially and adversely impact our results of operations. In many instances, integrating a new business will also
involve implementing or improving internal controls appropriate for a public company into a business that lacks them. It is also
possible that an acquisition could increase our risk of litigation, as a third party may be more likely to assert a legal claim following an
acquisition because of perceived deeper pockets or a perceived greater value of a claim. In addition, we may be unable to retain the
employees of acquired companies or the acquired company’s customers, suppliers, distributors, or other partners for a variety of
reasons, including the fact that these entities may be our competitors or may have close relationships with our competitors.
Further, we may find that we need to restructure or divest acquired businesses or assets of those businesses. Completed
acquisitions may not produce the full efficiencies, growth, or benefits that were expected. If we decide to sell assets or a business, it
may be difficult to identify buyers or alternative exit strategies on acceptable terms, in a timely manner, or at all, which could delay
the accomplishment of our strategic objectives. We may be required to dispose of a business at a lower price or on less advantageous
terms, or to recognize greater losses than we had anticipated.
If we acquire a business, we allocate the total purchase price to the acquired business’ tangible assets and liabilities,
identifiable intangible assets, and liabilities based on their fair values as of the date of the acquisition and record the excess of the
purchase price over those values as goodwill. If we fail to achieve the anticipated growth from an acquisition, or if we decide to sell
assets or a business, we may be required to recognize an impairment loss on the write down of our assets and goodwill, which could
materially and adversely affect our financial results. In addition, acquisitions can result in potentially dilutive issuances of equity
securities or the incurrence of debt, contingent liabilities or expenses, or other charges, any of which could harm our business and
affect our financial results.
Additionally, we participate in joint ventures and have investments in privately-held and publicly traded companies. For
example, we hold a 40% ownership interest in dpiX LLC, our major supplier of our amorphous silicon-based thin film transistor
arrays (flat panels used in our digital detectors), and a 50% interest in VEC Imaging GmbH & Co. KG, a joint venture to develop
nanotube based x-ray sources, and we recently invested in another nanotube technology company. These and other investments and
joint ventures are subject to risk of loss of investment capital as well as other risks. These types of investments are inherently risky, in
some instances because the markets for the technologies or products these companies have under development may never
materialize. If these companies do not succeed, we could lose some or all of our investment in these companies. There is no guarantee
that the time and money invested by us in these projects will yield the expected returns.
Warranty claims may materially and adversely affect our business.
We could experience an increase in warranty claims as a result of issues with product quality or product failures as a direct
result of our design, manufacturing, or issues in our supply chain. Such an occurrence may damage our market reputation, cause sales
to decline, or require repairs or voluntary remedial measures to enhance customer satisfaction, which could materially and adversely
impact our financial results. Increased warranty claims on any given product could cause us to halt production on that product and
significantly impair our liquidity and profitability, and could cause reputational harm to us. Because some categories of products tend
to experience higher numbers of warranty claims than others, a shift in the types of products that our customers purchase could lead to
an increase in warranty claims. If actual levels of warranty claims are greater than the level of claims we estimate, cost of sales could
increase, and our financial condition could be materially and adversely affected. In addition, product quality issues could result in
significant follow-on effects for us, including, among other things, reputational harm to us and our customers, loss of customers, and
liability as a result of product quality issues. These outcomes would materially and adversely affect our business and financial
condition.
Product defects or misuse may result in material product liability or professional errors and omissions claims, litigation,
investigation by regulatory authorities, or product recalls that could harm our future revenues and require us to pay material
uninsured claims.
Our business exposes us to potential product liability claims that are inherent in the manufacture, sale, installation, servicing,
and support of components that are used in medical devices and other devices that deliver radiation. Because our products, through
incorporation into OEMs’ systems, are involved in the intentional delivery of radiation to the human body and other situations where
people may come into contact with radiation (for example, when our security and inspection products are being used to scan cargo or
in the diagnosis of medical problems), the possibility for significant personal injury or loss of life exists. Although our products are
incorporated into OEMs’ systems, and thus only perform pursuant to the design and operating systems of OEMs, we may also be
subject to claims for property damage, personal injury, or economic loss related to or resulting from any errors or defects in our
products or the installation, servicing, or support of our products. Any accident or mistreatment could subject us to legal costs,
litigation, adverse publicity, and damage to our reputation, whether or not our products or services were a factor.
19
Table of Contents
If our X-ray inspection systems fail to detect the presence of bombs, explosives, weapons, contraband, or other threats to
personal safety, we could be subject to product and other liability claims or negative publicity, which could result in increased costs,
reduced sales, and a decline in the market price of our common stock. There are many factors beyond our control that could result in
the failure of our products to detect the presence of bombs, explosives, weapons, contraband, or other threats to personal safety,
including operator error and misuse of or malfunction of our equipment. The failure of our systems to detect the presence of these
dangerous materials may lead to personal injury, loss of life, and extensive property damage and may result in potential claims against
us.
Product liability actions are subject to uncertainty and may be expensive, time consuming, and disruptive to our operations.
For these and other reasons, we may choose to settle product liability claims against us regardless of their actual merit. A product
liability action determined against us could result in adverse publicity or significant damages, including the possibility of punitive
damages, and our combined financial position, results of operations, or cash flows could be materially and adversely affected.
If a product we design or manufacture were defective (whether due to design, labeling or manufacturing defects, improper
use of the product, or other reasons), we may be required to correct or recall the product and notify regulatory authorities. The adverse
publicity resulting from a correction or recall could damage our reputation and cause customers to review and potentially terminate
their relationships with us. A product correction or recall could consume management time and have an adverse financial impact on
our business, including incurring substantial costs, losing revenues, and accruing losses.
We maintain limited product liability insurance coverage. Our product liability insurance policies are expensive and have
high deductible amounts and self-insured retentions. Our insurance coverage may prove to be inadequate, and future policies may not
be available on acceptable terms or in sufficient amounts, if at all. If a material claim is not insured or is in excess of our insurance
coverage, we could have to pay substantial damages, which could have a material and adverse effect on our financial position and/or
results of operations.
We are exposed to credit risk and fluctuations in the values of our investment portfolio.
Our investments can be negatively affected by liquidity, credit deterioration, financial results, market and economic
conditions, political risk, sovereign risk, interest rate fluctuations or other factors. As a result, the value and liquidity of our cash, cash
equivalents and marketable securities may fluctuate substantially. Therefore, although we have not realized any significant losses on
our cash, cash equivalents and marketable securities, future fluctuations in their value could result in significant losses and could have
a material adverse impact on our financial condition and operating results.
ESG issues, including those related to climate change and sustainability, may increase our costs and impose difficult and
expensive compliance requirements.
Customers, consumers, investors, and other stakeholders are increasingly focusing on environmental issues, including climate
change, water use, deforestation, waste, and other sustainability concerns. We have increased our focus on sustainability and
measurement of our progress against Environmental, Social, and Governance (“ESG”) criteria by establishing sustainability and ESG
programs that reflect our current initiatives. The implementation of these initiatives may impose additional costs on us. If our ESG
initiatives fail to satisfy investors, current or potential customers, consumers, and our other stakeholders, our reputation, our ability to
sell products and services to customers, our ability to attract or retain employees, and our attractiveness as an investment or business
partner could be negatively impacted.
In addition, our customers have adopted, and may continue to adopt, procurement policies that require us to comply with
social, and environmental responsibility provisions. An increasing number of investors have adopted, and may continue to adopt, ESG
policies for their portfolio companies, and various voluntarily sustainability initiatives and organizations have promulgated different
social and environmental responsibility and sustainability guidelines. These practices, policies, provisions, and initiatives are under
active development, subject to change, can be unpredictable and conflicting, and may prove difficult and expensive for us to comply
with and could negatively affect our reputation, business, or financial condition.
Risks Relating to the Manufacture of our Products
Supply chain disruptions, including the loss of a supplier, and any inability to obtain supplies of important components have
impacted our ability to manufacture products, have caused delays in our ability to deliver products, and have increased our costs
and may continue to do so.
As discussed under the heading "Risks Related to our Business" above, supply chain disruptions have had, and will likely
continue to have, an impact on our ability to manufacture our products. We have experienced delays in receiving materials used to
make our products due both to material shortages and shipping delays. These delays are likely to continue. In addition, poor relations
between the United States and Russia; sanctions by the United States, European Union, and other countries against Russia; the
20
Table of Contents
response by Russia and other countries to these sanctions; and any escalation of political tensions or economic instability in the area
could have an adverse impact on our business, our customers, and our suppliers. Further, our customers, suppliers, and other third
parties with whom we do business may have staff, operations, materials or equipment located in Ukraine or Russia, which could
impact our supply chain, the services being provided to us, or our financial condition or results of operations. During fiscal year 2022,
material shortages increased and have caused, and could continue to cause, us to temporarily stop production of certain products. If we
are unable to obtain the materials necessary to make our products or if we must pay more for those materials, it could have a material
adverse effect on our business and financial results.
We obtain some of the components included in our products from a limited group of suppliers or from sole-source suppliers,
such as wave guides for industrial linear accelerators, transistor arrays, cesium iodide coatings and specialized integrated circuits for
flat panel detectors, X-ray tube targets, housings, glass frames, high-voltage cable, bearings and various other components. For
example, our major supplier of our amorphous silicon-based thin film transistor arrays (flat panels) used in our digital image detectors
is dpiX LLC. Although we hold a 40% ownership interest in dpiX, we do not have majority voting rights or the power to direct the
activities of dpiX. In addition, Varian is our sole source supplier for a key component in linear accelerators used in our security and
inspection products subsystems, which are specially made for us. If current suppliers cease producing these or other components, there
can be no assurance that the components will be available from other suppliers on reasonable terms or at all.
If we lose any of these limited- or sole-source suppliers, if their operations are substantially interrupted, or if any of them fail
to meet performance or quality specifications or delivery deadlines, we may be required to obtain and qualify one or more replacement
suppliers or to manufacture the components internally. Such an event (1) may then also require us to redesign or modify our products
to incorporate new parts and/or further require us to obtain clearance, qualification, or certification of these products, including by the
FDA, or obtain other applicable regulatory approvals in other countries, or (2) could significantly increase costs for the affected
products and cause material delays in delivery of those and other related products. In addition, manufacturing capacity limitations of
any of our suppliers or other inability of these suppliers to meet increasing demand or delivery deadlines could limit growth
opportunities for the affected product lines and damage customer relationships. Shortage of, and greater demand for, components and
subassemblies could also increase manufacturing costs if the supply/demand imbalance increases the price of the components and
subassemblies. Any of these events could materially and adversely affect our business and financial results. If we decide to
manufacturer a component that was previously purchased from an external supplier, we may not be able to manufacture the
component as efficiently as the external supplier and may experience delays or problems in successfully manufacturing the
component, which could materially and adversely affect our ability to manufacture and supply products to customers.
Shortages, changes in source of, and increased in prices for, raw materials have negatively impacted our ability to manufacture
products, have caused delays, and have increased our cost of goods.
We rely on the supplies of certain raw materials such as tungsten, lead, iridium, and copper for security and inspection
products and copper, lead, tungsten, rhenium, molybdenum zirconium, and various high grades of steel alloy for X-ray tubes.
Worldwide demand, availability, and pricing of these raw materials have been volatile. We have experienced and expect that we will
continue to experience increases in raw material costs due to inflation and other market constraints. We expect that availability and
pricing will continue to fluctuate in the future. If supplies are restricted or become unavailable or if prices increase further, this could
constrain our manufacturing of affected products, reduce our profit margins, or otherwise materially and adversely affect our business.
We are required to disclose (1) the presence in a company’s products of certain metals known as “conflict minerals,” which
are metals mined from the Democratic Republic of the Congo and adjoining countries, and (2) procedures regarding a manufacturer’s
efforts to identify the sourcing of those minerals from this region. Our complex supply chain may inhibit our ability to sufficiently
verify the origins of the relevant minerals used in our products through the due diligence procedures that we implement, which may
harm our reputation. In addition, we may encounter challenges in satisfying customers who require that all of the components of our
products are certified as conflict-free, which could place us at a competitive disadvantage if we are unable to do so. Moreover,
complying with these rules requires investigative efforts, which has and will continue to cause us to incur associated costs and could
materially and adversely affect the sourcing, supply, and pricing of materials used in our products or result in process or
manufacturing modifications, all of which could materially and adversely affect our results of operations.
If we are not able to match our manufacturing capacity with demand for our products, our financial results may suffer.
Many of our products have a long production cycle, and we must anticipate demand for our products to ensure adequate
manufacturing and testing capacity. If we are unable to anticipate demand, and our manufacturing or testing capacity does not keep
pace with product demand, we will not be able to fulfill orders in a timely manner, which may negatively impact our financial results
and overall business. Conversely, if demand for our products decreases, the fixed costs associated with excess manufacturing capacity
may harm our financial results, including by decreasing gross margins and increasing research and development costs as a percentage
of revenue.
21
Table of Contents
A disruption at our manufacturing facilities, as well as fluctuating manufacturing costs, could materially and adversely affect our
business.
The majority of our products are manufactured at our facility in Salt Lake City, Utah. Our manufacturing operations are
subject to potential power failures, the breakdown, failure, or substandard performance of equipment, the improper installation or
operation of equipment, pandemics, and natural or other disasters. Loss or damage to our manufacturing facility due to any of these
factors or otherwise could materially and adversely affect our ability to manufacture sufficient quantities of our products or otherwise
deliver products to meet customer demand or contractual requirements, which may result in a loss of revenue and other adverse
business consequences. Because of the time required to obtain regulatory approval and licensing of a manufacturing facility, we may
not be able to replace any lost manufacturing capacity on a timely basis. The occurrence of these or any other operational issues at our
manufacturing facilities could have a material and adverse effect on our business, financial condition, and results of operations.
Some of our products are manufactured in Wuxi, China; Walluf, Germany; Doetinchem, the Netherlands; and Calamba City,
Philippines, which are subject to similar risks but may also face additional regulatory and political risks, which could impact our
ability to manufacture and ship products in a timely manner or at all. We also manufacture security products in Las Vegas, Nevada,
and these operations are also subject to potential power failures, the breakdown, failure, or substandard performance of equipment, the
improper installation or operation of equipment, earthquakes, and other disasters, all of which could materially and adversely affect
our ability to deliver products to meet customer demand. In addition, our costs associated with manufacturing our products can vary
significantly from quarter to quarter, and fluctuations thereof may adversely affect our business, operating results, and/or financial
condition.
Our results have been and may continue to be affected by continuing worldwide economic instability, including changes in foreign
currency exchange rates and fluctuations in the price of crude oil and other commodities.
The global economy has been impacted by a number of economic and political factors, including the political conflict
between Russia and Ukraine and sustained inflation. In many markets, these conditions have shrunk capital equipment budgets,
slowed decision-making and made it difficult for our customers and vendors to accurately forecast and plan future business activities.
This, in turn, has caused our customers to be more cautious with, and sometimes freeze, delay, or dramatically reduce purchases and
capital project expenditures. Some countries have adopted and may in the future adopt austerity or stimulus programs that could
negatively affect our results from period to period. In addition, actions taken by the current U.S. administration may also create global
economic uncertainty, which may cause our customers to reduce their spending, which, in turn, could adversely affect our business,
financial condition, operating results, and cash flows. An uncertain economic environment may also disrupt supply or affect our
service business, as customers’ constrained budgets may result in pricing pressure, extended warranty provisions, and even
cancellation of service contracts. In addition, concerns over continued economic instability could make it more difficult for us to
collect outstanding receivables. A weak or deteriorating healthcare market would inevitably materially and adversely affect our
business, financial conditions, and results of operations.
Because our products are generally priced in U.S. Dollars, the strengthening of the U.S. Dollar in the last several years has
caused, and could continue to cause, some customers to ask for discounts, delay purchasing decisions, consider moving to in-sourcing
such components, or migrate to lower cost alternatives. Further, because our business is global and some payments may be made in
local currency, fluctuations in foreign currency exchange rates can impact our results by affecting product demand, revenues and
expenses, and/or the profitability in U.S. Dollars of products and services that we provide in foreign markets.
Changes in monetary or other policies here and abroad, including efforts to combat inflation, economic and/or political
instability, or in reaction thereto, would also likely affect foreign currency exchange rates. Furthermore, if one or more European
countries were to replace the euro with another currency, our sales in these countries, or in Europe generally, would likely be
materially and adversely affected until stable exchange rates are established.
Additionally, fluctuations in commodities prices could materially and adversely affect our performance. Rising commodities
prices have increased our costs and those of our medical OEM customers, which could in turn result in reduced demand for our
products or impact our financial results. Further, our security product revenues from oil-producing countries, in which we have a
significant customer base, have in the past suffered as a result of volatility in oil prices and remain sensitive to fluctuations in the
future.
22
Table of Contents
Delivery schedules for our security, industrial, and inspection products tend to be unpredictable.
We design, manufacture, sell, and service Linatron® X-ray accelerators, image-processing software, and image detection
products for security and inspection, such as cargo screening at ports and borders and nondestructive examination for a variety of
applications, as well as industrial applications. We generally sell security and inspection products to OEMs who incorporate our
products into their inspection systems, which are then sold to customs and other government agencies, as well as to commercial
organizations in the casting, power, aerospace, chemical, petrochemical, and automotive industries. We believe growth in our security
and inspection products will be driven by security cargo screening and border protection needs, as well as by the needs of customs
agencies to verify shipments for assessing duties and taxes. This business is heavily influenced by domestic and international
government policies on border and port security, political change, and government budgets. Orders for our security and inspection
products have been and may continue to be unpredictable, as governmental agencies may place large orders with us or our OEM
customers in a short time period and then may not place any orders for a long time period thereafter. Because it is difficult to predict
our OEM customer delivery, the actual timing of sales and revenue recognition varies significantly. The market for border protection
systems has slowed significantly, and end customers, particularly in oil-based economies and war zones in which we have a significant
customer base, are delaying system deployments or tenders and considering moving to alternative sources, resulting in a decline in the
demand for security and inspection products.
The demand for our security and inspection products is heavily influenced by U.S. and foreign governmental policies on
national and homeland security, border protection, and customs activities, which depend upon government budgets and appropriations
that are subject to economic conditions, as well as political changes and oil prices. We have seen customers freeze or dramatically
reduce purchases and capital project expenditures, delay projects, or act cautiously as governments around the world wrestle with
spending priorities. As economic growth remains sluggish in various jurisdictions and appears to be deteriorating in others, and as
concerns about levels of government employment and government debt continue, we expect that these effects will also continue. Bid
awards in this business may be subject to challenge by third parties. These factors make this business more unpredictable and could
cause volatility in our revenues and earnings.
Our international manufacturing operations subject it to volatility and other risks, including high security risks, which could result
in harm to our employees and contractors or substantial costs.
We conduct certain manufacturing operations internationally to reduce costs and streamline our manufacturing operations.
There are administrative, legal, and governmental risks to operating internationally that could increase operating expenses or hamper
the development of these operations. The risks from operating internationally that could increase our operating expenses and
materially and adversely affect our operating results, financial condition, and ability to deliver our products and grow our business
include, among others:
•
•
•
•
•
•
•
•
difficulties in staffing and managing employee relations and foreign operations, particularly in attracting and retaining
personnel qualified to design, sell, test, and support our products;
fluctuations in currency exchange rates;
difficulties in coordinating our operations globally and in maintaining uniform standards, controls, procedures, and policies
across our operations;
difficulties in enforcing contracts and protecting intellectual property;
diversion of management attention;
imposition of burdensome governmental regulations, including changing laws and regulations with respect to collection and
maintenance of personally identifiable data;
regional and country-specific political and economic instability, as discussed in greater detail below; and
inadequacy of the local infrastructure to support our operations.
Our international locations expose us to higher security risks compared to our U.S. locations, which could result in both harm
to our employees and contractors or substantial costs. Some of our services are performed in or adjacent to high-risk locations where
the country or location and surrounding area is suffering from political, social, or economic turmoil, war or civil unrest, or has a high
level of criminal or terrorist activity. In those locations where we have employees or operations, we may incur substantial costs to
maintain the safety of our personnel. Despite these precautions, the safety of our personnel in these locations may continue to be at
risk, and we may in the future suffer the loss of employees and contractors, which could harm our business reputation and operating
results.
Our operations are vulnerable to interruption or loss due to natural or other disasters, power loss, strikes, and other events beyond
our control.
23
Table of Contents
We conduct some of our activities, including manufacturing, research and development, administration, and data processing
at facilities located in areas that have in the past experienced or may in the future experience natural disasters. Our insurance coverage
for such disasters may not be adequate or continue to be available at commercially-reasonable terms, or at all. A major disaster (such
as a major fire, hurricane, earthquake, flood, tsunami, volcanic eruption or terrorist attack) affecting our facilities, or those of our
suppliers, could significantly disrupt our operations and delay or prevent product manufacture and shipment during the time required
to repair, rebuild, or replace our or our suppliers’ damaged manufacturing facilities. These delays could be lengthy and costly. If any
of our customers’ facilities are adversely affected by a disaster, shipments of our products could be delayed. Additionally, customers
may delay purchases of our products until our operations return to normal. For example, following the earthquake and tsunami
disasters in Japan in 2011, the operations of Canon Medical Systems, our largest customer, were impacted, and, as a consequence,
orders to and product shipment from our business were delayed for several months. Even if our suppliers or customers are able to
quickly respond to a disaster, the ongoing effects of the disaster could create some uncertainty in the operations of our business. In
addition, our facilities may be subject to a shortage of available electrical power and other energy supplies. Any shortages may
increase our costs for power and energy supplies or could result in blackouts, which could disrupt the operations of our affected
facilities and harm our business. Further, our products are typically shipped from a limited number of ports, and any disaster, strike, or
other event blocking shipment from these ports could delay or prevent shipments and harm our business. In addition, concerns about
terrorism, the effects of a terrorist attack, political turmoil, or an outbreak of epidemic diseases could have a negative effect on our
business operations, those of our suppliers and customers, and the ability to travel, resulting in adverse consequences on our revenues
and financial performance.
Risks Relating to our Intellectual Property and Information Systems
Our competitive position would be harmed if we are not able to maintain our intellectual property rights and protecting our
intellectual property can be costly.
We file applications as appropriate for patents covering new products and manufacturing processes. We cannot be sure,
however, that patents will be issued from any of our pending or future patent applications. We also cannot be sure that our current
patents, the claims allowed under our current patents, or patents for technologies licensed to us will be sufficiently broad to protect our
technology position against competitors. Issued patents owned by, or licensed to, us may be challenged, invalidated, or circumvented,
or the rights granted under the patents may not provide us with competitive advantages. Asserting our patent rights against others in
litigation or other legal proceedings is costly and diverts managerial resources. An adverse finding in patent infringement litigation
could adversely impact our competitive position. In addition, we may not be able to detect patent infringement by others or may lose
our competitive position in the market before we are able to do so.
We also rely on a combination of copyright, trade secret, and other laws, and contractual restrictions on disclosure, copying
and transferring title (including confidentiality agreements with vendors, strategic partners, co-developers, employees, consultants, and
other third parties), to protect our proprietary, and other confidential rights. These protections may prove to be inadequate, since
agreements may still be breached, and we may not have adequate remedies for a breach. Our trade secrets may become known to or be
independently developed by others, including as a result of misappropriation by unauthorized access to our technology systems. If our
proprietary or confidential information is misappropriated, our business and financial results could be materially and adversely
impacted. We have trademarks, both registered and unregistered, that are maintained and enforced to provide customer recognition for
our products in the marketplace, but unauthorized parties may still use them. We also license certain patented or proprietary
technologies from others. In some cases, products with substantial revenues may depend on these license rights. If we were to lose the
rights to license these technologies, or our costs to license these technologies were to materially increase, our business would suffer.
As we expand our manufacturing capabilities outside of the United States, more of our intellectual property may be held in
jurisdictions that do not have robust intellectual property protections, which may make it harder for us to adequately protect our
Intellectual Property.
24
Table of Contents
Third parties may claim that we are infringing upon their intellectual property, and we could suffer significant litigation or
licensing expenses or be prevented from selling our products.
There is a substantial amount of litigation over patent and other intellectual property rights in the industries in which we
compete. Our competitors, like companies in many high technology businesses, continually review other companies’ activities for
possible conflicts with their own intellectual property rights. In addition, non-practicing entities may review our activities for conflicts
with their patent rights. Determining whether a product infringes on a party’s intellectual property rights involves complex legal and
factual issues, and the outcome of this type of litigation is often uncertain. Parties may claim that we are infringing upon their
intellectual property rights. We may not be aware of intellectual property rights of others that relate to our products, services, or
technologies. From time to time, we have received notices from parties asserting infringement, and we have been subject to lawsuits
alleging infringement of patent or other intellectual property rights. Any dispute regarding patents or other intellectual property could
be costly and time consuming and could divert our management and key personnel from our business operations. We may not prevail
in a dispute. We do not maintain insurance for intellectual property infringement, so costs of defense, whether or not we are successful
in defending an infringement claim, will be borne by us and could be significant. If we are unsuccessful in defending or appealing an
infringement claim, We may be subject to significant damages, and our combined financial position, results of operations, or cash
flows could be materially and adversely affected. We may also be subject to injunctions against development and sale of our products,
the effect of which could be to materially reduce our revenues. Furthermore, a third party claiming infringement may not be willing to
license our rights to us, and even if a third-party rights holder is willing to do so, the amounts we might be required to pay under the
associated royalty or license agreement could be significant. We could decide to alter our business strategy or voluntarily cease the
allegedly infringing actions rather than face litigation or pay a royalty, which could materially and adversely impact our business and
results of operations.
Disruption of critical information systems or material breaches in the security of our systems may materially and adversely affect
our business and customer relations.
Information technology (including technology from third party providers) helps us operate efficiently, interface with and
support our customers, maintain financial accuracy and efficiency, and produce our financial statements. In the ordinary course of our
business, we collect, process and store sensitive data, including intellectual property, proprietary business information and that of
customers, suppliers and business partners, third parties accessing our website, patient data and personally identifiable information of
customers and employees, in our data centers and on our networks, as well as in third party off-site data centers. Despite security
measures, there is an increasing threat of information security attacks, including from computer viruses or other malicious codes,
unauthorized access attempts, and cyber-attacks that pose risks to companies, including us. Because the techniques used to obtain
unauthorized access, or to sabotage systems, change frequently, have become increasingly sophisticated and generally are not
recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative
measures, which could result in data leaks or otherwise compromise our confidential or proprietary information and disrupt our
operations. If we do not allocate and effectively manage the resources necessary to build and sustain the proper technology
infrastructure, we could be subject to, among other things, transaction errors, processing inefficiencies, the loss of customers, business
disruptions, or the loss of or damage to intellectual property through a security breach or misappropriation of intellectual property.
Such security breaches could expose us to a risk of loss of information, litigation, and possible liability to employees, customers, and/
or regulatory authorities. If our data management systems do not effectively collect, secure, store, process, and report relevant data for
the operation of our business, whether due to equipment malfunction or constraints, software deficiencies, or human error, our ability
to effectively plan, forecast, and execute our business plan and comply with applicable laws and regulations will be impaired, perhaps
materially. Any such impairment could materially and adversely affect our financial condition, results of operations, cash flows, and
the timeliness with which we report our operating results internally and externally.
We use certain cloud-based software. A security breach, whether of our products, of our customers’ network security and
systems, or of third-party hosting services could disrupt access to our customers’ stored information and could lead to the loss of,
damage to or public disclosure of our customers’ stored information, including patient health information. Such an event could have
serious negative consequences, including possible patient injury, regulatory action, fines, penalties and damages, reduced demand for
our solutions, an unwillingness of our customers to use our solutions, harm to our reputation and brand, and time-consuming and
expensive litigation, any of which could have a material and adverse effect on our financial results.
25
Table of Contents
Risks Relating to Our Legal and Regulatory Environment
Changes in import/export regulatory regimes, tariffs, and national policies could continue to negatively impact our business.
Tariffs and changes in international trade agreements or trade-related laws and regulations may have an adverse impact on
our business. As a component manufacturer, our products are integrated into the systems and products of our OEM customers. If the
United States, China or other countries levy tariffs, duties or other additional taxes or restrictions on our customer’s products, the
demand for such products, and our components included in such products, could decrease, which could have a material adverse effect
on our business. Uncertainty over tariffs and trade wars could also cause our customers to delay or cancel orders for our products.
The United States has imposed tariffs on items imported from China and other countries that are incorporated into our
products. Tariffs on items imported by us from China and other countries have increased our costs and have increased prices and
lowered gross margins on some of our products, thereby having a direct adverse impact on our business and results of operations.
China has imposed retaliatory tariffs that impact a number of our products, including U.S. origin X-ray tubes, heat exchange units, and
certain flat panel detectors. The tariffs levied by China have increased our customers’ costs for products imported into China, which
has caused us to make price concessions on some products and has caused some customers to stop purchasing our products. We expect
that tariffs will continue to have a negative effect on our business and results of operations, including the possibility of continued price
concessions or loss of business. Tariffs could limit our ability to compete for increased market share in China, which could cause our
long-term prospects in China to suffer. In addition, future tariffs could have a more significant impact on our business. The imposition
of additional tariffs by the United States could result in the adoption of additional tariffs by China and other countries, as well as
further retaliatory actions by any affected country, which could negatively impact the global market for imaging equipment and could
have a significant adverse effect on our business.
In addition to tariffs, China’s stated policy of reducing its dependence on foreign manufacturers and technology companies
may result in reduced demand for our products in China. Both the United States and China could pursue policies to reduce their
dependence on foreign goods, which could have a material adverse impact on our business, results of operations and financial position.
In addition, as a consequence of such policies, there are risks that the Chinese government may, among other things, require the use of
local suppliers, compel companies that do business in China to partner with local companies to conduct business, or provide incentives
to government-backed local customers to buy from local suppliers rather than companies like ours, all of which could adversely
impact our business, results of operations and financial position.
Compliance with foreign laws and regulations applicable to the marketing, manufacture, and distribution of our products may be
costly, and failure to comply may result in significant penalties and other harm to our business.
Regulatory requirements affecting our operations and sales outside the United States vary from country to country, often
differing significantly from those in the United States. In general, outside the United States, some of our products are regulated as
medical devices by foreign governmental agencies similar to the FDA.
For us to market our products internationally, we must obtain clearances or approvals for products and product modifications.
These processes (including, for example, the processes in the EU, the European Economic Area (“EEA”), Switzerland, Brazil,
Australia, China, Japan and Canada) can be time consuming, expensive and uncertain, which can delay our ability to market products
in those countries. Delays in the receipt of or failure to receive regulatory approvals, the inclusion of significant limitations on the
indicated uses of a product, the loss of previously obtained approvals or failure to comply with existing or future regulatory
requirements could restrict or prevent us from doing business in a country or subject us to a variety of enforcement actions and civil or
criminal penalties, which would materially and adversely affect our business. In addition, compliance with changing regulatory
schemes may add additional complexity, cost and delays in marketing or selling our products.
26
Table of Contents
Within the EU/EEA, we must obtain, and in turn affix, a CE mark certification, which is a European marking of conformity
that indicates that a product meets the essential requirements of the European Union's Medical Device Directive. Compliance with the
Medical Device Directive is done through a self-certification process that is then verified by an independent certification body called a
“Notified Body,” which is an organization empowered by the legislature to conduct this verification. Once the CE mark is affixed, the
Notified Body will regularly audit us to ensure that we remain in compliance with the applicable European laws and Medical Device
Directive. By affixing the CE mark to our product, we are certifying that our products comply with the laws and regulations required
by the EU/EEA countries, thereby allowing the free movement of our products within these countries and others that accept CE mark
standards. If we cannot support our performance claims and demonstrate compliance with the applicable European laws and the
Medical Device Directive, we would lose our right to affix the CE mark to our products, which would prevent us from selling our
products within the EU/EEA/Switzerland territory and in other countries that recognize the CE mark. In April 2017, the European
Commission adopted two regulations on medical devices that impose stricter requirements for placing medical devices in the EU
market, as well as for Notified Bodies. These regulations have resulted in the limited availability of recognized Notified Bodies, which
could delay our ability to obtaining CE marks. We may be subject to risks associated with additional testing, modification,
certification, or amendment of our existing market authorizations, or we may be required to modify products already installed at our
customers’ facilities to comply with the official interpretations of these revised regulations.
We are also subject to international laws and regulations of general applicability relating to matters such as environmental
protection, safe working conditions, and manufacturing practices, as well as others. These are often comparable to, if not more
stringent than, the equivalent regulations in the United States. Sales overseas are also affected by regulation of matters such as product
standards, packaging, labeling, environmental and product recycling requirements, import and export restrictions, tariffs, duties, and
taxes.
In addition, we are required to timely file various reports with international regulatory authorities similar to the reports we are
required to timely file with U.S. regulatory authorities, including reports required by international adverse event reporting regulations.
If these reports are not timely filed, regulators may impose sanctions, including temporarily suspending our market authorizations or
CE mark, and sales of our products may suffer.
Further, as we enter new businesses or pursue new business opportunities internationally, or as regulatory schemes change,
we may become subject to additional laws, rules, and regulations. Becoming familiar with and implementing the infrastructure
necessary to comply with these laws, rules, and regulations is costly. Additionally, in some countries, we rely or may rely in the future
on foreign distributors and agents to assist in complying with foreign regulatory requirements, and we cannot be sure that they will
always do so. The failure of us or our agents to comply with these laws, rules, and regulations could delay the introduction of new
products, cause reputational harm, or result in investigations, fines, injunctions, civil penalties, criminal prosecution, or an inability to
sell our products in or to import our products into certain countries, which could materially and adversely affect our business.
Compliance with U.S. laws and regulations applicable to the marketing, manufacture, and distribution of our products may be
costly, and failure or delays in obtaining regulatory clearances or approvals or failure to comply with applicable laws and
regulations could prevent us from distributing our products, require us to recall our products, or result in significant penalties or
other harm to our business.
Some of our products and those of OEMs that incorporate our products are subject to extensive and rigorous government
regulation in the United States. Compliance with these laws and regulations is expensive and time-consuming, and failure to comply
with these laws and regulations could materially and adversely affect our business.
27
Table of Contents
Generally, our manufacturing operations for medical devices, and those of our third-party manufacturers, are required to
comply with the Quality System Regulations (“QSR”) of the FDA, as well as other federal and state regulations for medical devices
and radiation-emitting products. The FDA, through authorized auditing organizations, makes announced and unannounced periodic
and on-going inspections of medical device manufacturers to determine compliance with QSR and, in connection with these
inspections, issues reports known as Form FDA 483 reports when the FDA believes the manufacturer has failed to comply with
applicable regulations and/or procedures. If Form FDA 483 reports are not addressed or corrective action is not taken in a timely
manner and to the FDA’s satisfaction, the FDA may issue a warning letter or proceed directly to an enforcement action. Failure to
respond in a timely manner to a warning letter, or any other notice of noncompliance and to promptly come into compliance could
result in the FDA bringing an enforcement action, which could include the total shutdown of our production facilities, denial of
importation rights to the United States for products manufactured in overseas locations, adverse publicity, and criminal and civil fines.
The expense and costs of any corrective actions that we may take, which may include product recalls, correction and removal of
products from customer sites, or changes to our product manufacturing and quality systems, could materially and adversely impact our
financial results and may also divert management resources, attention, and time. Additionally, if a warning letter were issued,
customers could delay purchasing decisions or cancel orders, and we could face increased pressure from our competitors, who could
use the warning letter against us in competitive sales situations, either of which could materially and adversely affect our reputation,
business, and stock price.
In addition, we are required to timely file various reports with the FDA, including reports required by the medical device
reporting regulations (“MDRs”), that require we report to regulatory authorities if our devices may have caused or contributed to a
death or serious injury, or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction
were to recur. If we initiate a correction or removal of a device to reduce a risk to health posed by the device, we would be required to
submit a publicly-available correction and removal report to the FDA and, in many cases, similar reports to other regulatory agencies.
This report could be classified by the FDA as a device recall, which could lead to increased scrutiny by the FDA, other international
regulatory agencies, and our customers regarding the quality and safety of our devices. If these MDRs or correction and removal
reports are not filed on a timely basis, regulators may impose sanctions, sales of our products may suffer, and we may be subject to
product liability or regulatory enforcement actions, all of which could harm our business.
Government regulation may also cause significant delays or even prevent the marketing and full commercialization of future
products or services that we may develop and/or may impose costly requirements on our business. Further, as we enter new businesses
or pursue new business opportunities, we will become subject to additional laws, rules, and regulations, including FDA and foreign
rules and regulations. Becoming familiar with and implementing the infrastructure necessary to comply with these laws, rules, and
regulations is costly and time consuming. In addition, failure to comply with these laws, rules and regulations could delay the
introduction of new products and could materially and adversely affect our business.
If we or any of our suppliers, distributors, agents, or customers fail to comply with FDA, Federal Trade Commission, or other
applicable U.S. regulatory requirements or are perceived to have failed to comply with regulations, we may face:
•
•
•
•
•
•
•
•
•
•
adverse publicity affecting both us and our customers;
increased pressures from competitors;
investigations by governmental authorities;
fines, injunctions, civil penalties, and criminal prosecution;
partial suspension or total shutdown of production facilities or the imposition of operating restrictions;
increased difficulty in obtaining required clearances or approvals or losses of clearances or approvals already granted;
seizures or recalls of our products or those of our customers;
delays in purchasing decisions by customers or cancellation of existing orders;
the inability to sell our products; and
difficulty in obtaining product liability or operating insurance at a reasonable cost, or at all.
We are also subject to federal and state laws and regulations of general applicability relating to matters such as environmental
protection, safe working conditions, manufacturing practices, and other matters. Insurance coverage is not commercially available for
violations of law, including the fines, penalties, or investigatory costs that we may incur as the consequence of regulatory violations.
Consequently, we do not have insurance that would cover this type of liability.
28
Table of Contents
We sell certain X-ray tube products as replacements which are subject to medical device certification and product registration laws
and regulations, which vary by country and are subject to change, and we may be unable to receive registration approval or
renewal of existing registrations if we fail to meet regulatory approval requirements or if the approval process becomes
commercially infeasible or impractical.
We market and distribute certain X-ray tubes through distributors and third-party/multi-vendor service organizations that are
used as equivalent replacements for specific OEM tubes. We are subject to medical device certification and product registration laws,
which vary by country and are subject to periodic reviews and changes by regulatory authorities in those countries. For example, to
sell X-ray tubes for replacement applications in China, product registrations must be approved by the new National Medical Products
Administration (“NMPA”). We must comply with the requirements of the NMPA, and we may not be able to receive registration
approval or renewal of existing registrations if we fail to meet regulatory approval requirements or if the process of gaining approval
becomes commercially infeasible or impractical. Certain of these local laws and regulations have the effect of serving as a barrier to
trade and can be difficult to navigate predictably.
In addition, certain countries in which our products are sold require products to undergo re-registration if the product is
altered in any significant way.
These registration processes can be costly and time consuming, and customers may decide to purchase products from our
competitors that do not have to be involved in a re-registration process. In addition, our inability to receive or renew product
registrations may prevent us from marketing and/or distributing those particular products for replacement applications in the specific
country.
Existing and future healthcare reforms, and changes to reimbursement rates, may indirectly have a material adverse effect on our
business and results of operations.
Sales of our products to OEMs in the medical sector indirectly depend on whether adequate reimbursement is available for
our customers’ products from a variety of sources, such as government healthcare insurance programs, including U.S. Medicare and
Medicaid programs, foreign government programs, private insurance plans, health maintenance organizations, and preferred provider
organizations. Without adequate reimbursement, the demand for our customers’ products, and therefore indirectly our products, may
be limited.
Healthcare reform proposals and medical cost containment measures in the United States and in many foreign countries could
limit the use of both ours and our customers’ products, reduce reimbursement available for such use, further tax the sale or use of our
products, and further increase the administrative and financial burden of compliance. These reforms and measures, including the
uncertainty in the medical community regarding their nature and effect, could have a material and adverse effect on us and our
customers’ purchasing decisions regarding our products and treatments and could harm our business, results of operations, financial
condition, and prospects. We cannot predict the specific healthcare programs and regulations that will be ultimately implemented by
local, regional, and national governments globally. However, any changes that lower reimbursements for us or our customers’
products and/or procedures using these products, including, for example, existing reimbursement incentives to convert from analog to
digital X-ray systems, or changes that reduce medical procedure volumes or increase cost containment pressures on us or others in the
healthcare sector could materially and adversely affect our business and results of operations.
We are subject to federal, state, and foreign laws governing our business practices which, if violated, could result in substantial
penalties. Additionally, challenges to or investigations into our practices could cause adverse publicity and be costly to respond to
and thus could harm our business.
Anti-corruption laws and regulations. We are subject to the U.S. Foreign Corrupt Practices Act and anti-corruption laws, as
well as similar laws in foreign countries, such as the U.K. Bribery Act and the Law on the Fundamentals of Health Protection in the
Russian Federation. In general, there is a worldwide trend to strengthen anti-corruption laws and their enforcement, and the healthcare
industry and medical equipment manufacturers have been particular targets of these investigation and enforcement efforts. Any
violation of these laws by us or our agents or distributors could create substantial liability for us, subject our officers and directors to
personal liability, and cause a loss of reputation in the market. We operate in many countries, including India and China, where the
public sector is perceived as being corrupt. Our strategic business plans include expanding our business in regions and countries that
are rated as higher risk for corruption activity by Transparency International e.V., an international non-profit that publishes an annual
corruption perception index. Becoming familiar with and implementing the infrastructure necessary to comply with laws, rules, and
regulations applicable to new business activities and mitigating and protecting against corruption risks could be costly. Failure by us or
our agents or distributors to comply with these laws, rules, and regulations could delay our expansion into high-growth markets and
could materially and adversely affect our business. We will likely do more business, directly and potentially indirectly, in countries
where the public sector is perceived to be corrupt. Increased business in higher-risk countries could subject us and our officers and
directors to increased scrutiny and increased liability from our business operations.
29
Table of Contents
Competition and trade compliance laws. We are subject to various competition and trade compliance laws in the jurisdictions
where we operate. Regulatory authorities in those jurisdictions may have the power to subject us to sanctions and impose changes or
conditions in the way we conduct our business. An increasing number of jurisdictions provide private rights of action for competitors
or consumers to assert claims of anti-competitive conduct and seek damages. Increased government scrutiny of our actions or
enforcement or private rights of action could materially and adversely affect our business or damage our reputation. We may be
required to conduct internal investigations or face audits or investigations by one or more domestic or foreign government agencies,
which could be costly and time consuming and could divert our management and key personnel from our business operations. An
adverse outcome under any such investigation or audit could subject us to fines and criminal or other penalties, which could materially
and adversely affect our business and financial results. Furthermore, competition laws may prohibit or increase the cost of future
acquisitions that we may desire to undertake.
Laws and ethical rules governing interactions with healthcare providers. We do not generally sell our products directly to
healthcare providers, but may occasionally sell our products to healthcare providers through distributors or otherwise engage
healthcare providers to provide services. The U.S. Medicare and Medicaid “anti-kickback” laws, and similar state laws, prohibit
payments or other remuneration that is intended to induce hospitals, physicians, or others either to refer patients or to purchase, lease,
or order, or to arrange for or recommend the purchase, lease, or order of healthcare products or services for which payment may be
made under federal and state healthcare programs, such as Medicare and Medicaid. These laws affect our sales, marketing, and other
promotional activities by limiting the kinds of financial arrangements we may have with hospitals, physicians, or other potential
purchasers of our products. They particularly impact how we structure our sales offerings, including discount practices, customer
support, education and training programs, physician consulting, research grants, and other fee-for-service arrangements. These laws
are broadly written, and it is often difficult to determine precisely how these laws will be applied to specific circumstances.
Federal and state “false claims” laws generally prohibit knowingly presenting, or causing to be presented, claims for payment
from Medicare, Medicaid, or other government payors that are false or fraudulent, or for items or services that were not provided as
claimed. Although we do not submit claims directly to payors, manufacturers can be, and have been, held liable under these laws if
they are deemed to “cause” the submission of false or fraudulent claims by providing inaccurate billing or coding information to
customers or through certain other activities, including promoting products for uses not approved or cleared by the FDA, which is
called off-label promotion. Violating “anti-kickback” and “false claims” laws can result in civil and criminal penalties, which can be
substantial, as well as potential mandatory or discretionary exclusion from healthcare programs for noncompliance. Even an
unsuccessful challenge or investigation into our practices could cause adverse publicity and be costly to defend and thus could harm
our business and results of operations. Additionally, several recently-enacted state and federal laws, including laws in Massachusetts
and Vermont, and the federal Physician Payment Sunshine Act, now require, among other things, extensive tracking and maintenance
of databases regarding the disclosure of equity ownership and payments to physicians, healthcare providers, and hospitals. These laws
may require us to implement the necessary and costly infrastructure to track and report certain payments to healthcare
providers. Failure to comply with these tracking and reporting laws could subject us to significant civil monetary penalties.
Other Laws. From time to time, new laws or regulations may be adopted and compliance with these laws or regulations could
be costly or time consuming. For example, in July 2021, the U.S. government passed the Uyghur Forced Labor Prevention Act (the
“UFLPA”), which imposes importation limits on goods produced using forced labor in China, especially the Xinjiang Uyghur
Autonomous Region, and imposes related sanctions. Guidance related to compliance with the UFLPA has not yet been issued, and we
cannot yet evaluate the impact that compliance with the UFLPA will have on our business or financial condition.
We are subject to similar laws in foreign countries where we conduct business. For example, within the EU, the control of
unlawful marketing activities is a matter of national law in each of the member states. The member states of the EU closely monitor
perceived unlawful marketing activity by companies. We could face civil, criminal, and administrative sanctions if any member state
determines that we have breached our obligations under such state’s national laws. Industry associations also closely monitor the
activities of member companies. If these organizations or authorities name us as having breached our obligations under their
regulations, rules, or standards, our reputation would suffer, and our business and financial condition could be materially and
adversely affected.
30
Table of Contents
Certain of our products are subject to regulations relating to use of radioactive material, compliance with which may be costly, and
a failure to comply with these regulations may materially and adversely affect our business.
As a manufacturer and seller of medical devices and devices emitting radiation or utilizing radioactive by-product material,
we and some of our suppliers and distributors are subject to extensive regulation by United States governmental authorities, such as
the FDA, the Nuclear Regulatory Commission (“NRC”), and state and local regulatory agencies, which is intended to ensure the
devices are safe and effective and comply with laws governing products which emit, produce, or control radiation. These regulations
govern, among other things, the design, development, testing, manufacturing, packaging, labeling, distribution, import/export, sale,
and marketing and disposal of our products. We are also subject to international laws and regulations that apply to manufacturers of
radiation-emitting devices and products utilizing radioactive materials. These are often comparable to, if not more stringent than, the
equivalent regulations in the United States.
Our industrial and medical devices utilizing radioactive material are subject to NRC clearance and approval requirements,
and the manufacture and sale of these products are subject to extensive federal and state regulation that varies from state to state and
among regions. Our manufacture, distribution, installation, service, and removal of industrial devices utilizing radioactive material or
emitting radiation also requires us to obtain a number of licenses and certifications for these devices and materials. Service of these
products must also be performed in accordance with a specific radioactive materials licenses. Obtaining licenses and certifications may
be time consuming, expensive, and uncertain.
The handling and disposal of radioactive materials resulting from the manufacture, use, or disposal of our products may
impose significant costs and requirements. Disposal sites for the lawful disposal of materials generated by the manufacture, use, or
decommissioning of our products may no longer accept these substances in the future or may accept them on unfavorable terms.
If we are unable to obtain required FDA clearances or approvals for a product or are unduly delayed in doing so, or the uses of
that product are limited, our business could suffer.
Typically, our OEM customers are responsible for obtaining 510(k) pre-market notification clearance on their systems that
integrate our products. A substantial majority of our products are “Class I” devices that do not require 510(k) clearance, but we do
produce software that is classified as a Class II device subject to 510(k) clearance. Unless an exception applies, we may be required by
FDA regulations to obtain a 510(k) pre-market notification clearance in connection with the manufacture of a new medical device or a
new indication for use of, or other significant change in, an existing currently marketed medical device before we can market or sell
those products in the United States. Modifications or enhancements to a product that could significantly affect its safety or
effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, labeling, packaging, or
manufacturing process also require a new 510(k) clearance. Although manufacturers make the initial determination whether a change
to a cleared device requires a new 510(k) clearance, we cannot ensure that the FDA will agree with our decisions not to seek additional
approvals or clearances for particular modifications to our products or that we will be successful in obtaining new 510(k) clearances
for modifications. Obtaining clearances or approvals is time consuming, expensive, and uncertain. We may not be able to obtain the
necessary clearances or approvals or may be unduly delayed in doing so, which could harm our business. Furthermore, even if we are
granted regulatory clearances or approvals, they may include significant limitations on the indicated uses of the product, which may
limit the market for the product. If we are unable to obtain required FDA clearance or approval for a product or is unduly delayed in
doing so, or the uses of that product were limited, our business could suffer.
Unfavorable results of legal proceedings could materially and adversely affect our financial results.
From time to time, we are a party to or otherwise involved in legal proceedings, claims, government inspections, audits or
investigations, and other legal matters, both inside and outside the United States, arising in the ordinary course of our business or
otherwise. Legal proceedings are often lengthy, taking place over a period of years with interim motions or judgments subject to
multiple levels of review (such as appeals or rehearings) before the outcome is final. Litigation and other legal proceedings, claims,
government inspections, audits and investigations are subject to significant uncertainty and may be expensive, time consuming, and
disruptive to our operations. For these and other reasons, we may choose to settle legal proceedings and claims, regardless of their
actual merit.
If a legal proceeding were ultimately resolved against us, it could result in significant compensatory damages, and, in certain
circumstances, punitive damages, disgorgement of revenue or profits, remedial corporate measures, or injunctive relief imposed on us.
If our existing insurance does not cover the amount or types of damages awarded, or if other resolution or actions taken as a result of
such legal proceeding were to restrain our ability to market one or more of our material products or services, our combined financial
position, results of operations, or cash flows could be materially and adversely affected. In addition, legal proceedings, and any
adverse resolution thereof, can result in adverse publicity and damage to our reputation, which could materially and adversely impact
our business.
31
Table of Contents
Environmental laws impose compliance costs on our business and may also result in liability.
We are subject to environmental laws around the world. These laws regulate many aspects of our operations, including our
handling, storage, transport, and disposal of hazardous substances, such as the chemicals and materials that we use in the course of our
manufacturing operations. They can also impose cleanup liabilities, including with respect to discontinued operations. As a
consequence, we can incur significant environmental costs and liabilities, some recurring and others not recurring. Although we follow
procedures intended to comply with existing environmental laws, we, like other businesses, may mishandle or inadequately manage
hazardous substances used in our manufacturing operations and can never completely eliminate the risk of contamination or injury
from certain materials that we use in our business and, therefore, we cannot completely eliminate the prospect of resulting claims and
damage payments. We may also be assessed fines and/or other penalties for failure to comply with environmental laws and
regulations. Insurance has provided coverage for portions of cleanup costs resulting from historical occurrences, but we do not expect
to maintain insurance coverage for costs or claims that might result from any future contamination.
Future changes in environmental laws could also increase our costs of doing business, perhaps significantly. Several
countries, including some in the EU, now require medical equipment manufacturers to bear certain disposal costs of products at the
end of the product’s useful life, thereby increasing its costs. The EU has also adopted directives that may lead to restrictions on the use
of certain hazardous substances or other regulated substances in some of our products sold there. These directives, along with another
that requires substance information to be provided upon request, could increase our operating costs in order to maintain our access to
certain markets. All of these costs, and any future violations or liabilities under environmental laws or regulations, could have a
material adverse effect on our business.
Failure to maintain effective internal controls and procedures could negatively impact us.
We must, among other things, maintain effective internal controls and procedures for financial reporting and disclosure
purposes. In the past, we have not always been successful in maintaining effective internal controls and procedures. Internal control
over financial reporting is complex and may be revised over time to adapt to changes in our business or changes in applicable
accounting rules. We cannot assure that our internal control over financial reporting will be effective in the future or that material
weaknesses will not be discovered with respect to a prior period for which it had previously believed that internal controls were
effective. If our internal controls and procedures are not effective, our financial statements may not accurately reflect the results of our
business and operations. In addition, there could also be a negative reaction in the financial markets due to a loss of investor
confidence in us and the reliability of our financial statements, which could affect our stock price.
Risks Relating to Our Indebtedness
We have significant debt obligations that could adversely affect our business, profitability and ability to meet our obligations.
As of September 30, 2022, our total combined indebtedness was approximately $449.7 million. The borrowings under our
unsecured convertible senior notes due 2025 (the “Convertible Notes”) bear interest at a fixed rate of 4.00% and borrowings under our
Senior Secured Notes due 2027 (the “Senior Secured Notes”) bear interest at a fixed rate of 7.875%.
Our debt could potentially have important consequences to us and our investors, including:
limiting our flexibility in planning for, or reacting to, changes in our business and the industry;
limiting our ability to borrow additional funds as needed or increasing the costs of any such borrowing;
•
•
• make it more difficult for us to satisfy our obligations, including our debt obligations;
•
increase our vulnerability to adverse economic and general industry conditions, including interest rate fluctuations, because a
portion of our borrowings are and will continue to be at variable rates of interest;
require us to dedicate a substantial portion of our cash flow from operations to payments on our debt, which would reduce the
availability of our cash flow from operations to fund working capital, capital expenditures or other general corporate
purposes;
place us at a disadvantage compared to competitors that may have proportionately less debt; and
limit our ability to obtain additional debt or equity financing due to applicable financial and restrictive covenants in our debt
agreements.
•
•
•
32
Table of Contents
If our cash requirements in the future are greater than expected, our cash flow from operations may not be sufficient to repay
all of the outstanding debt as it becomes due, and we may not be able to borrow money, sell assets, or otherwise raise funds on
acceptable terms, or at all, to refinance our debt. For example, holders of the Convertible Notes will have the right to require us to
repurchase all or a portion of the Convertible Notes on the occurrence of a fundamental change at a repurchase price equal to 100% of
the principal amount of the Convertible Notes to be repurchased, plus accrued and unpaid interest, if any, to, but excluding, the
fundamental change repurchase date. Further, if a make-whole fundamental change as defined in the Indenture governing the
Convertible Notes occurs prior to the maturity date of the Convertible Notes, we will in some cases be required to increase the
conversion rate for a holder that elects to convert its Convertible Notes in connection with such make-whole fundamental change.
Unless we elect to deliver solely shares of common stock to settle a conversion of the Convertible Notes (other than paying cash in
lieu of delivering any fractional share), we will be required to make cash payments for those Convertible Notes being converted.
However, we may not have enough available cash or be able to obtain financing at the time we are required to make such repurchases
of the Convertible Notes surrendered or pay cash with respect to the Convertible Notes being converted.
Despite our substantial indebtedness, we may still be able to incur significantly more debt. This could intensify the risks described
above.
We and our subsidiaries may be able to incur substantial indebtedness in the future. As of September 30, 2022, we had
approximately $100 million of additional available borrowing capacity (subject to borrowing base availability) under the revolving
credit agreement that we entered into on September 30, 2020 (the “Asset-Based Loan”, or "ABL Facility"). In addition to any amounts
that might be available to us for borrowing under the ABL Facility, subject to certain conditions, we will have the right to request an
increase of aggregate commitments under the ABL Facility by an aggregate amount of up to $75 million by obtaining additional
commitments either from one or more of the lenders under the ABL Facility or other lending institutions.
Although the ABL Facility and the indenture governing our Senior Secured Notes contain restrictions on our and our
subsidiaries’ ability to incur additional indebtedness, these restrictions are subject to a number of important qualifications and
exceptions, and the indebtedness incurred in compliance with these restrictions could be substantial. Furthermore, the covenants in the
indenture governing our Convertible Notes do not restrict the incurrence of indebtedness by the company or any of its subsidiaries,
and the covenants that may be contained in any future debt instruments could allow us to incur a significant amount of additional
indebtedness.
The more leveraged we become, the more we, and in turn holders of our notes, will be exposed to certain risks described
above under “Risks Relating to Our Indebtedness—We have significant debt obligations that could adversely affect our business,
profitability and ability to meet our obligations.”
The ABL Facility and the indenture governing our Senior Secured Notes impose significant operating and financial restrictions
that may limit our current and future operating flexibility, particularly our ability to respond to changes in the economy or our
industry or to take certain actions, which could harm our long-term interests and may limit our ability to make payments on the
notes.
Our ABL Facility and the indenture governing our Senior Secured Notes impose significant operating and financial
restrictions on us limit our ability, among other things, to:
•
•
incur, assume or permit to exist additional indebtedness (including guarantees thereof);
pay dividends or certain other distributions on our capital stock or repurchase our capital stock or prepay subordinated
indebtedness;
prepay, redeem or repurchase certain debt;
issue certain preferred stock or similar equity securities;
incur liens on assets;
•
•
•
• make certain loans, investments or other restricted payments;
•
•
•
•
allow to exist certain restrictions on the ability of our restricted subsidiaries to pay dividends or make other payments to us;
engage in transactions with affiliates;
alter the business that we conduct; and
sell certain assets or merge or consolidate with or into other companies.
As a result of these restrictions, we may be:
•
•
•
limited in how we conduct our business;
unable to raise additional debt or equity financing to operate during general economic or business downturns; or
unable to compete effectively or to take advantage of new business opportunities.
33
Table of Contents
A breach of the covenants under the indenture governing our Senior Secured Notes or the ABL Facility could result in an
event of default under the applicable indebtedness. Such a default, if not cured or waived, may allow the creditors to accelerate the
related debt and may result in the acceleration of any other debt that is subject to an applicable cross-acceleration or cross-default
provision. In addition, an event of default under the ABL Facility would permit the lenders under the ABL Facility to terminate all
commitments to extend further credit under the ABL Facility. Furthermore, if we were unable to repay the amounts due and payable
under the ABL Facility, those lenders could proceed against the collateral securing such indebtedness. In the event our lenders or
holders of the notes offered hereby accelerate the repayment of our borrowings, we and our subsidiaries may not have sufficient assets
to repay that indebtedness.
Our ability to continue to have the necessary liquidity to operate our business may be adversely impacted by a number of factors,
including uncertain conditions in the credit and financial markets, which could limit the availability and increase the cost of
financing. A deterioration of our results of operations and cash flow resulting from decreases in consumer spending, could, among
other things, impact our ability to comply with the fixed charge coverage ratio contained in our ABL Facility.
Our historical sources of liquidity to fund ongoing cash requirements include cash flows from operations, cash and cash
equivalents, borrowings through our previous credit facility and convertible debt offerings. The sufficiency and availability of credit
may be adversely affected by a variety of factors, including, without limitation, the tightening of the credit markets, including lending
by financial institutions who are sources of credit for our borrowing and liquidity; an increase in the cost of capital; the reduced
availability of credit; our ability to execute our strategy; the level of our cash flows, which will be impacted by customer demand for
our products; compliance with a fixed charge coverage ratio that is included in our ABL Facility, interest rate fluctuations and the
adverse impact of the COVID-19 outbreak on the U.S. and world-wide economies and on our business. We cannot predict the future
level of interest rates or the effect of any increase in interest rates on the availability or aggregate cost of our borrowings. We cannot
be certain that any additional required financing, whether debt or equity, will be available in amounts needed or on terms acceptable to
us, if at all.
The ABL Facility contains a minimum Fixed Charge Coverage Ratio of 1.00 to 1.00 that is tested when excess availability
under the ABL is less than the greater of (i) 10.0% of the Loan Cap (the lesser of (a) the aggregate commitments under the ABL
Facility and (b) the aggregate borrowing base) and (ii) $7.5 million. If we have to borrow in excess of 10.0% of the Loan Cap and
$7.5 million, and we do not increase our earnings, we also would be at risk of not being in compliance with the ABL Facility’s fixed
charge coverage ratio. Compliance with the fixed charge coverage ratio is dependent on the results of our operations, which are subject
to a number of factors including current economic conditions. Adverse developments in the economy, including as a result of the
COVID-19 outbreak, could lead to reduced spending by our customers and end-users which could adversely impact our net sales and
cash flow, which could affect our ability to comply with the fixed charge coverage ratio. In addition, the ABL Facility contains other
affirmative and negative covenants that restrict our operating and financing activities. These provisions may limit our ability to, among
other things, incur future indebtedness, contingent obligations or liens, guarantee indebtedness, make certain investments and capital
expenditures, sell stock or assets, pay dividends and consummate certain mergers or acquisitions. Failure to comply with the fixed
charge coverage ratio and other covenants, including the requirement to timely deliver financial statements within applicable grace
periods, could result in an event of default. Upon an event of default, if the ABL Facility is not amended or the event of default is not
waived, the lender could declare all amounts then outstanding, together with accrued interest, to be immediately due and payable. If
this happens, we may not be able to make those payments or borrow sufficient funds from alternative sources to make those payments.
Even if we were to obtain additional financing, that financing may be on unfavorable terms.
We may not be able to generate sufficient cash to service all of our indebtedness, and may be forced to take other actions to satisfy
our obligations under our indebtedness, which may not be successful.
If our cash flows and capital resources are insufficient to fund our debt service obligations, we may be forced to reduce or
delay investments and capital expenditures, or to sell assets, seek additional capital or restructure or refinance our indebtedness,
including the notes. These alternative measures may not be successful and may not permit us to meet our scheduled debt service
obligations. If our operating results and available cash are insufficient to meet our debt service obligations, we could face substantial
liquidity problems and might be required to dispose of material assets or operations to meet our debt service and other obligations. We
may not be able to consummate those dispositions or to obtain the proceeds that we could realize from them, and these proceeds may
not be adequate to meet any debt service obligations then due. Any future refinancing of our indebtedness could be at higher interest
rates and may require us to comply with more onerous covenants which could further restrict our business operations. Additionally,
the indenture relating to our notes will limit the use of the proceeds from any disposition of our assets. As a result, the indenture may
prevent us from using the proceeds from such dispositions to satisfy our debt service obligations.
34
Table of Contents
Our credit rating and ability to access well-functioning capital markets are important to our ability to secure future debt financing
on acceptable terms. Our credit ratings may not reflect all risks associated with an investment in our secured notes.
Our access to the debt markets and the terms of such access depend on multiple factors including the condition of the debt
capital markets, our operating performance and our credit ratings. These ratings are based on a number of factors including an
assessment of our financial strength and financial policies. Our borrowing costs will be dependent to some extent on the rating
assigned to our debt. However, there can be no assurance that any particular rating assigned to us will remain in effect for any given
period of time or that a rating will not be changed or withdrawn by a rating agency if, in that rating agency’s judgment, future
circumstances relating to the basis of the rating so warrant. Incurrence of additional debt by us could adversely affect our credit rating.
Any disruptions or turmoil in the capital markets or any downgrade of our credit rating could adversely affect our cost of funds,
liquidity, competitive position and access to capital markets, which could materially and adversely affect our business operations,
financial condition and results of operations. In addition, downgrading the credit rating of our debt securities or placing us on a watch
list for possible future downgrading would likely have an adverse effect on the market price of our securities.
We entered into certain hedging positions that may affect the value of the Convertible Notes and the volatility and value of our
common stock.
In connection with the issuance of the Convertible Notes, we entered into certain convertible note hedge transactions. These
hedge transactions are expected generally to reduce potential dilution of our common stock on any conversion of the Convertible
Notes or offset any cash payments we are required to make in excess of the principal amount of such converted Convertible Notes, as
the case may be, with such reduction or offset subject to a cap. The counterparties to these hedging positions or their respective
affiliates may modify their hedge positions by entering into or unwinding various derivatives with respect to our common stock or
purchasing or selling our common stock in secondary market transactions prior to the maturity of the Convertible Notes (and are likely
to do so during any observation period related to a conversion of Convertible Notes or following any repurchase of Convertible Notes
by us on any fundamental change repurchase date or otherwise). This activity could cause or avoid an increase or a decrease in the
market price of our common stock or the Convertible Notes. In addition, if any such hedging positions fail to become effective, the
counterparties to these hedging positions or their respective affiliates may unwind their hedge positions, which could adversely affect
the value of our common stock.
Risks Relating to Our Common Stock
The trading price of our common stock may decline or fluctuate significantly and fluctuations in our operating results, including
quarterly revenues, and margins, may cause our stock price to be volatile, which could cause losses for our stockholders.
In the past year, our stock price has ranged from a low of $18.90 to a high of $32.65. We cannot guarantee that an active
trading market will be sustained for our common stock. Nor can we predict the prices at which shares of our common stock may trade.
We have experienced and expect in the future to experience fluctuations in our operating results, including revenues and margins,
from period to period. These fluctuations may cause our stock price to be volatile, which could cause losses for our stockholders.
Our quarterly and annual operating results, including our revenues and margins, may be affected by a number of other
factors, including:
•
•
•
•
•
•
•
•
•
•
•
•
•
the introduction and timing of announcement of new products or product enhancements by us and our competitors;
changes in our or our competitors’ pricing or discount levels;
changes in foreign currency exchange rates and other economic uncertainty;
changes in import/export regulatory regimes including the imposition of tariffs on our products or those of our customers;
changes in the relative portion of our revenues represented by our various products, including the relative mix between higher
margin and lower-margin products;
changes in the relative portion of our revenues represented by our international region as a whole and by regions within the
overall region, as well as by individual countries (notably, those in emerging markets);
fluctuation in our effective tax rate, which may or may not be known to us in advance;
the availability of economic stimulus packages or other government funding, or reductions thereof;
disruptions in the supply or changes in the costs of raw materials, labor, product components or transportation services;
changes to our organizational structure, which may result in restructuring or other charges;
disruptions in our operations, including our ability to manufacture products, caused by events such as earthquakes, fires,
floods, terrorist attacks or the outbreak of epidemic diseases;
the unfavorable outcome of any litigation or administrative proceeding or inquiry, including governmental audits, as well as
ongoing costs associated with legal proceedings and governmental audits; and
accounting changes and adoption of new accounting pronouncements.
35
Table of Contents
Because many of our operating expenses are based on anticipated capacity levels, and a high percentage of these expenses are
fixed for the short term, a small variation in the timing of revenue recognition can cause significant variations in operating results from
quarter to quarter. If our gross margins fall below the expectation of securities analysts and investors, the trading price of our common
stock may decline.
Conversion of the Convertible Notes may dilute the ownership interest of our stockholders or may otherwise depress the market
price of our common stock.
The conversion of the Convertible Notes may dilute the ownership interests of our stockholders. On conversion of the
Convertible Notes, we have the option to pay or deliver, as the case may be, cash, shares of common stock, or a combination of cash
and shares of common stock. If we elect to settle our conversion obligation in shares of common stock or a combination of cash and
shares of common stock, any sales of our common stock issuable on such conversion could adversely affect prevailing market prices
of our common stock. In addition, the existence of the Convertible Notes may encourage short selling by market participants because
the conversion of the Convertible Notes could be used to satisfy short positions, or anticipated conversion of the Convertible Notes
into shares of our common stock, any of which could depress the market price of our common stock.
The conditional conversion feature of the Convertible Notes, if triggered, may adversely affect our financial condition and
operating results.
In the event the conditions for optional conversion of the Convertible Notes by holders are met before the close of business
on the business day immediately preceding June 1, 2025, holders of the Convertible Notes will be entitled to convert the Convertible
Notes at any time during specified periods at their option. If we elect to satisfy our conversion obligation by settling all or a portion of
our conversion obligation in cash, it could adversely affect our liquidity. In addition, even if holders do not elect to convert their
Convertible Notes, we could be required under applicable accounting rules to reclassify all or a portion of the outstanding principal of
the Convertible Notes as a current rather than long-term liability, which would result in a material reduction of our net working capital
and may seriously harm our business.
Certain provisions in our Amended and Restated Certificate of Incorporation, our Amended and Restated Bylaws, our Indenture,
and of Delaware law, may prevent or delay an acquisition of our, which could decrease the trading price of our common stock.
Our Amended and Restated Certificate of Incorporation, our Amended and Restated Bylaws, and Delaware law contain,
provisions that are intended to deter coercive takeover practices and inadequate takeover bids by making such practices or bids
unacceptably expensive to the bidder and to encourage prospective acquirers to negotiate with our board of directors rather than to
attempt a hostile takeover. These provisions include, among others:
•
•
•
•
•
the inability of our stockholders to call a special meeting;
the inability of our stockholders to act without a meeting of stockholders;
rules regarding how stockholders may present proposals or nominate directors for election at stockholder meetings;
the right of our board of directors to issue preferred stock without stockholder approval; and,
the ability of our directors, and not stockholders, to fill vacancies on our board of directors.
In addition, because we did not elect to be exempt from Section 203 of the Delaware General Corporation Law (the
“DGCL”), this provision could also delay or prevent a change of control that stockholders may favor. Section 203 provides that,
subject to limited exceptions, persons that acquire, or who are affiliated with a person that acquires, more than 15% of the outstanding
voting stock of a Delaware corporation (an “interested stockholder”) shall not engage in any business combination with that
corporation, including by merger, consolidation, or acquisitions of additional shares, for a three-year period following the date on
which the person became an interested stockholder, unless: (1) prior to such time, the board of directors of such corporation approved
either the business combination or the transaction that resulted in the stockholder becoming an interested stockholder; (2) upon
consummation of the transaction that resulted in the stockholder becoming an interested stockholder, the interested stockholder owned
at least 85% of the voting stock of such corporation at the time the transaction commenced; or (3) on or subsequent to such time the
business combination is approved by the board of directors of such corporation and authorized at a meeting of stockholders by the
affirmative vote of at least two-thirds of the outstanding voting stock of such corporation not owned by the interested stockholder.
These provisions are not intended to make us immune from takeovers. However, these provisions will apply even if the offer
may be considered beneficial by some stockholders and could delay or prevent an acquisition that our board of directors determines is
not in the best interests of us and our stockholders. These provisions may also prevent or discourage attempts to remove and replace
incumbent directors.
36
Table of Contents
Furthermore, certain provisions in our indenture governing the Convertible Notes may make it more difficult or expensive for
a third party to acquire us. For example, our indenture requires us, at the holders’ election, to repurchase the Convertible Notes for
cash on the occurrence of a fundamental change and, in certain circumstances, to increase the conversion rate for a holder that
converts our Convertible Notes in connection with a make-whole fundamental change. A takeover of us may trigger the requirement
that we repurchase the Convertible Notes or increase the conversion rate, which could make it costlier for a third party to acquire us.
Our Indenture also prohibits us from engaging in a merger or acquisition unless, among other things, the surviving entity assumes the
obligations under the Convertible Notes and our Indenture. These and other provisions in our indenture could deter or prevent a third
party from acquiring us even when the acquisition may be favorable to holders of the Convertible Notes or our stockholders.
Liabilities related to our operations when we were part of Varian, or liabilities associated with our spin-off from Varian, could
materially and adversely affect our business, financial condition, results of operations, and cash flows.
We entered into a Separation and Distribution Agreement when we spun off from Varian. The agreement provides for, among
other things, indemnification obligations designed to make Varian financially responsible for liabilities allocable to Varian before the
spin-off, and to make us financially responsible for liabilities allocable to us before the spin-off and for information contained in our
registration statement that describes the separation, we, and the transactions contemplated by the Separation and Distribution
Agreement. We may be subject to substantial liabilities if it is required to indemnify Varian or if Varian is required, but unable, to
indemnify us. Either of these could negatively affect our business, financial position, results of operations, and/or cash flows.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Our corporate headquarters is located in Salt Lake City, Utah, where we own approximately 37 acres of land and
approximately 494,000 square feet of space used for manufacturing, administrative functions and research and development, for both
our Medical and Industrial segments. We also own or lease 24 other facilities throughout North America, Europe and Asia that
comprise over 1,000,000 square feet of manufacturing facilities, warehouses, sales and service, research and development and office
space, which are used for our Medical and/or Industrial segments, depending on the location.
In addition to our location in Salt Lake City, Utah, our other primary owned facilities are located in Las Vegas, Nevada;
Franklin Park, Illinois; and Doetinchem, the Netherlands. Our Las Vegas, Nevada facility has approximately 5 acres of land and
94,000 square feet of space used for manufacturing, administrative functions and research and development, for our Industrial
segment. Our Franklin Park, Illinois, facility has approximately 3 acres of land and approximately 61,000 square feet of space used for
manufacturing, administrative functions and research and development, for both our Medical and Industrial segments. Our
Doetinchem, Netherlands, facility is approximately 4 acres and approximately 100,000 square feet of space used for manufacturing,
engineering, administrative functions, and research and development, for our Medical and Industrial segments.
Primary leased facilities include approximately 288,000 square feet in Laguna, Philippines, approximately 46,000 square feet
in Wuxi, China, approximately 34,000 square feet in Bremen, Germany, approximately 34,000 of square feet in Walluf, Germany and
approximately 26,000 square feet in San Jose, California, all of which are used for manufacturing, research and development, or
administrative functions for our Medical and Industrial segments.
Item 3. Legal Proceedings
We are subject to various claims, complaints and legal actions in the normal course of business from time to time. We do not
believe we have any currently pending litigation for which the outcome could have a material adverse effect on our operations or
financial position. See Item 1A. "Risk Factors - Unfavorable results of legal proceedings could materially and adversely affect our
financial results."
Item 4. Mine Safety Disclosures
Not applicable.
37
Table of Contents
PART II
Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Varex's common stock is traded on the NASDAQ Global Select Market (the “NASDAQ”) under the symbol “VREX.”
Since our inception, we have not paid any cash dividends and have no current plan to pay cash dividends on Varex common
stock. As of November 7, 2022, there were 1,385 holders of record of Varex common stock.
This graph shows the total return on VREX common stock from September 29, 2017 through September 30, 2022, with
comparative total returns for the Russell 2000 Index (“RUT”) and the Dow Jones Medical Equipment Index (“DJUSAM”). The graph
below assumes that $100.00 was invested on September 29, 2017 in our common stock and the companies listed in the RUT and the
DJUSAM, as well as a reinvestment of dividends paid on such investments throughout the period.
Item 6. [Reserved]
38
Period EndingIndex ValueSeptember 2017 - September 2022VREX USRUTDJUSAM09/1703/1809/1803/1909/1904/2010/2004/2110/2104/2209/22050100150200250
Table of Contents
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis contains forward-looking statements relating to future events or our future financial or
operating performance that involve risks and uncertainties, as set forth above under "Forward-Looking Statements." Our actual results
could differ materially from those anticipated in these forward-looking statements as a result of certain factors described in this
Annual Report on Form 10-K.
Our Business
Varex Imaging Corporation is a leading innovator, designer and manufacturer of X-ray tubes, digital detectors, linear
accelerators and other image software processing solutions, which are critical components of a variety of X-ray based imaging
equipment. Our success depends, among other things, on our ability to anticipate and respond to changes in our markets, the direction
of technological innovation and the demands of our customers. For additional information on our business, see Part I, Item 1.
Impact of COVID-19, Inflation and the General Economic Environment
The unprecedented nature of the COVID-19 pandemic and its effect on the global economy began to significantly disrupt our
business in fiscal year 2020 by initially reducing demand for our products followed by strong recovery in demand but increasing
variability in supply of raw materials and manufacturing productivity.
During the twelve months ended September 30, 2022, demand for many of our products recovered to pre-pandemic levels
and our business has continued to grow. We believe that demand for our products has increased due to increased investments in
healthcare and diagnostics coupled with end-users (such as hospitals) making capital purchases that were previously deferred due to
the uncertainty surrounding COVID-19. While we are encouraged by the recovery that we have seen, we remain cautious as many
factors remain unpredictable and recent high rates of inflation have increased our costs and could negatively affect our future profit
margins. The existence of inflation in the economy has resulted in, and may continue to result in, higher interest rates and capital costs,
increased shipping costs, supply shortages, increased costs of labor, weakening exchange rates and other similar effects.
We continue to experience logistics, supply chain, and manufacturing challenges that we expect will continue into 2023. As
economies around the world continue to recover, shortages in raw materials have become more widespread. During the latter half of
fiscal year 2021 and throughout fiscal year 2022, we experienced shortages of certain materials and used more of our inventory on
hand than we have used historically. Shortages of materials, particularly micro-controller chips and associated electronic components,
have caused and may continue to cause, delays in manufacturing products for our customers. In some cases, raw material shortages
and delivery delays from our suppliers are communicated to us with very little advanced warning, which has caused operational and
customer order fulfillment challenges. While we are dedicating significant resources to manage, mitigate, and resolve these issues, we
currently expect supply chain challenges to continue to impact our ability to deliver products to our customers over the next several
quarters. Increased freight charges and shipping delays have also become more common and are expected to continue into the
foreseeable future. Due to the rising cost environment, in addition to ongoing expense management, we began to raise prices on
certain products in fiscal year 2022 and anticipate making further pricing adjustments throughout fiscal year 2023.
During the twelve months ended September 30, 2022, our manufacturing facilities continued to operate with minimal
disruption. Notwithstanding the foregoing, local government lockdowns, particularly in China, have impacted, and could continue to
impact, our manufacturing operations in affected countries.
The full extent to which the COVID-19 pandemic and ensuing supply chain challenges have and will directly or indirectly
impact us, including our business, financial condition, and results of operations, will depend on future developments that are highly
uncertain and cannot be accurately predicted. We will continue to actively monitor the situation and may take further actions that alter
our business operations or that we determine are in the best interests of our employees, customers, suppliers, and stockholders. For
additional information on risks related to the pandemic and other supply chain risks that could impact our results, see Part I, Item 1A -
Risk Factors.
Fiscal Year
Our fiscal year is the 52- or 53-week period ending on the Friday nearest September 30. Fiscal year 2022 was the 52-week
period that ended September 30, 2022, fiscal year 2021 was the 52-week period that ended October 1, 2021, and fiscal year 2020 was
the 53-week period that ended October 2, 2020. Set forth below is a discussion of our results of operations for fiscal years 2022, 2021
and 2020.
Results of Operations
Our annual report on Form 10-K for the fiscal year ended October 1, 2021, filed November 19, 2021, includes a discussion
and analysis of our year-over-year changes, financial condition, and results of operations for the fiscal years ended October 1, 2021
39
Table of Contents
and October 2, 2020 in Item 7 of Part II therein. Our year-over-year changes, financial condition, and results of operations for the
fiscal years ended September 30, 2022 and October 1, 2021 are set forth below.
Comparison of Results of Operations for Fiscal Year 2022 and 2021
Revenues, net
(In millions)
Medical
Industrial
Total revenues, net
Medical as a percentage of total revenues
Industrial as a percentage of total revenues
2022
% Change
2021
% Change
2020
$
$
674.7
184.7
859.4
78.5 %
21.5 %
5%
6%
5%
$
$
643.8
174.3
818.1
78.7 %
21.3 %
10%
13%
11%
$
$
584.5
153.8
738.3
79.2 %
20.8 %
Medical revenues increased $30.9 million in fiscal year 2022 compared to 2021 primarily due to increased sales of X-ray
tubes and digital detectors for CT, oncology and dental applications in fiscal year 2022.
Industrial revenues increased $10.4 million due to increased sales of X-ray tubes for airport security and digital detectors for
inspection applications in fiscal year 2022.
Revenues by Region
(In millions)
Americas
EMEA
APAC
Total revenues, net
Americas as a percentage of total revenues
EMEA as a percentage of total revenues
APAC as a percentage of total revenues
2022
% Change
2021
% Change
2020
$
$
273.3
280.8
305.3
859.4
31.8 %
32.7 %
35.5 %
2%
2%
12%
5%
$
$
268.5
276.3
273.3
818.1
32.8 %
33.8 %
33.4 %
5%
19%
9%
11%
$
$
255.0
231.5
251.8
738.3
34.5 %
31.4 %
34.1 %
The Americas revenues increased $4.8 million in fiscal year 2022 compared to 2021 primarily due to increased sales of
digital detectors, high voltage cables, and computer-aided detection software in fiscal year 2022. EMEA revenues increased
$4.5 million primarily due to increased sales of X-ray tubes and security inspection systems and machines. APAC revenues increased
$32.0 million primarily due to increased sales of OEM X-ray tubes and digital detectors in China.
Gross Profit
(In millions)
Medical
Industrial
Total gross profit
Medical gross margin
Industrial gross margin
Total gross margin
2022
% Change
2021
% Change
2020
$
$
210.5
73.0
283.5
31.2 %
39.5 %
33.0 %
4%
7%
4%
$
$
203.2
68.3
271.5
31.6 %
39.2 %
33.2 %
49%
27%
43%
$
$
136.4
53.8
190.2
23.3 %
35.0 %
25.8 %
Gross profit increased $12.0 million in fiscal year 2022 compared to 2021. The Medical segment gross profit in 2022
increased $7.3 million primarily due to the increased sales of CT X-ray tubes and oncology modalities partially offset by higher freight
and material costs. The Industrial segment gross profit in 2022 increased $4.7 million primarily as a result of increased sales of digital
detectors for dynamic imaging applications and non-destructive inspection applications, partially offset by higher freight and material
costs.
40
Table of Contents
Operating Expenses
(In millions)
Research and development
As a percentage of total revenues
Selling, general and administrative
As a percentage of total revenues
Impairment of intangible assets
As a percentage of total revenues
Operating expenses
As a percentage of total revenues
Research and Development
2022
% Change
2021
% Change
2020
$
$
$
$
77.0
9.0 %
118.3
13.8 %
—
— %
195.3
22.7 %
7%
(6)%
—%
(1)%
$
$
$
$
71.9
8.8 %
125.5
15.3 %
—
— %
197.4
24.1 %
(9)%
(12)%
(100)%
(12)%
$
$
$
$
78.9
10.7 %
142.2
19.3 %
2.8
0.4 %
223.9
30.3 %
Research and development costs for fiscal year 2022 increased to 9.0% of revenues primarily due to increased spending on
material costs supporting research and development initiatives and includes $1 million in costs related to a development agreement
entered into during the fourth quarter of fiscal year 2022 with a third-party company. See Note 12, Commitments and Contingencies,
included in the accompanying Notes to Consolidated Financial Statements. We are committed to investing in research and
development efforts to support long-term growth objectives by bringing new and innovative products to market for our customers.
Selling, General and Administrative
Selling, general and administrative expenses as a percentage of total revenues decreased to 13.8% for fiscal year 2022 from
15.3% for fiscal year 2021 due to lower compensation costs and higher revenue.
Interest and Other Expense, Net
The following table summarizes our interest and other expense, net:
(In millions)
Interest income
Interest expense
Other expense, net
Interest and other expenses, net
2022
% Change
2021
% Change
2020
$
$
0.4
(39.8)
(4.3)
(43.7)
300%
(5)%
23%
(4)%
$
$
0.1
(42.1)
(3.5)
(45.5)
—%
34%
(54)%
17%
$
$
0.1
(31.4)
(7.6)
(38.9)
Interest and other expense, net decreased in fiscal year 2022 compared to fiscal year 2021. Interest income increased
primarily due to an increase in investments made into marketable debt securities. Interest expense decreased due to the redemption of
$27 million of our Senior Secured Notes in March 2022 and the redemption of $30 million of our Senior Secured Notes in July 2021,
as well as reduced fees on the ABL Facility.
Taxes on Income
Effective tax rate
Fiscal Years
2022
2021
30.8 %
37.4 %
We had an income tax expense of $13.7 million and an income tax expense of $10.7 million, for effective rates of 30.8% and
37.4%, for fiscal years 2022 and 2021, respectively.
During fiscal year 2022, our effective tax rate varied from the U.S. federal statutory rate of 21% primarily due to the
unfavorable impact of profit in foreign jurisdictions with statutory tax rates greater than 21% and also U.S. deferred tax attributes and
losses in certain foreign jurisdictions for which a valuation allowance is provided. These unfavorable items were partially offset by the
favorable impact of U.S. tax reform regarding international provisions, return to provision adjustments, and R&D tax credits.
During fiscal year 2021, our effective tax rate varied from the U.S. federal statutory rate of 21% primarily due to the
unfavorable impact of U.S. deferred tax attributes and losses in certain foreign jurisdictions for which no benefit was recognized and a
reduction in benefit for U.S. net operating losses carried back to prior years. These unfavorable items were partially offset by the
favorable impact of R&D tax credits and U.S. tax reform regarding international provisions.
41
Table of Contents
We estimated the fiscal year 2022 GILTI (global intangible low-taxed income), BEAT (base-erosion anti-abuse tax), FDII
(foreign-derived intangible income), limitations on interest expense deductions, and other components of U.S. tax reform, and have
included these amounts in the calculation of the fiscal year 2022 tax provision. We made an accounting policy election, as allowed by
the SEC and FASB, to recognize the impact of GILTI as a period cost if and when incurred.
Liquidity and Capital Resources
We assess our liquidity in terms of our ability to generate cash to fund our operations, including working capital and
investing activities. We continue to generate cash from operating activities and believe that our operating cash flow, cash on our
balance sheet and availability under our ABL facility are sufficient to meet our anticipated operating cash needs for at least the next 12
months and will be sufficient to allow us to continue to invest in our existing businesses, consummate strategic acquisitions and
manage our capital structure on a short and long-term basis. We are currently not aware of any trends or demands, commitments,
events, or uncertainties that will result in or that are reasonably likely to result in our liquidity increasing or decreasing in any material
way that will impact our capital needs during or beyond the next 12 months. See Item 1A. “Risk Factors” for a further discussion. The
maximum availability under our ABL Facility was $100.0 million as of September 30, 2022; however, the borrowing base under the
ABL Facility fluctuates from month-to-month depending primarily on the amount of eligible accounts receivable and inventory. As of
September 30, 2022 the amount available under our ABL Facility was $94.5 million, and the ABL Facility remained undrawn. At
September 30, 2022 we had $412.3 million in long-term debt, net of discounts and deferred issuance costs of $35.3 million.
On March 18, 2022, the Company redeemed $27 million of principal of our $270.0 million, 7.875% Senior Secured Notes
due 2027 (the "Senior Secured Notes"), in accordance with the terms and conditions of the governing indenture by paying cash of
$28.7 million, inclusive of the redemption premium and accrued interest, and recognized a $1.2 million loss related to the redemption
premium and the write-off of previously recorded debt issuance costs. See Note 9, Borrowings, in the accompanying Notes to
Consolidated Financial Statements for more information regarding our indebtedness.
Our consolidated cash and cash equivalents decreased from $144.6 million as of October 1, 2021, to $89.4 as of
September 30, 2022. This decrease was primarily due to capital expenditures of $21.3 million, debt repayments of $29.4 million, and
net purchases of marketable debt securities of $16.7 million and certificates of deposit of $7.2 million, offset by cash inflows from
operating activities of $16.9 million and $4.9 million in proceeds from shares issued under employee stock purchase plan.
Cash and Cash Equivalents, Certificates of Deposit, and Marketable Debt Securities
The following table summarizes our cash and cash equivalents, certificates of deposit, and marketable debt securities:
(In millions)
Cash and cash equivalents
Marketable debt securities not included in cash
and cash equivalents
Certificates of deposit not included in cash and
cash equivalents
Total
September 30, 2022
October 1, 2021
$ Change
% Change
$
$
89.4 $
144.6 $
16.7
7.2
—
—
113.3 $
144.6 $
(55.2)
16.7
7.2
(31.3)
(38.2) %
100.0 %
100.0 %
(21.6) %
42
Table of Contents
Borrowings
The following table summarizes the changes in our debt outstanding:
(In millions, except for percentages)
September 30, 2022
October 1, 2021
$ Change
% Change
Current maturities of long-term debt
Current portion of other debt
Total current maturities of long-term debt:
Non-current maturities of long-term debt:
Convertible Senior Unsecured Notes
Senior Secured Notes
Other debt
Total non-current maturities of long-term
debt:
Unamortized issuance costs and debt discounts
Unamortized discount - Convertible Notes
$
$
$
$
$
Unamortized issuance costs - Convertible Notes
Debt issuance costs - Senior Secured Notes
Total
Total debt outstanding, net
$
$
Cash Flows
(In millions)
Net cash flow provided by (used in):
Operating activities
Investing activities
Financing activities
Effects of exchange rate changes on cash and cash equivalents
Net (decrease) increase in cash and cash equivalents
2.1 $
2.1 $
2.8 $
2.8 $
200.0 $
200.0 $
243.0
4.6
270.0
7.8
447.6 $
477.8 $
(28.7) $
(37.6) $
(3.1)
(3.5)
(35.3) $
414.4 $
(4.1)
(4.4)
(46.1) $
434.5 $
(0.7)
(0.7)
—
(27.0)
(3.2)
(30.2)
8.9
1.0
0.9
10.8
(20.1)
(25.0) %
(25.0) %
— %
(10.0) %
(41.0) %
(6.3) %
(23.7) %
(24.4) %
(20.5) %
(23.4) %
(4.6) %
2022
Fiscal Years
2021
2020
$
$
16.9 $
92.6 $
(48.4)
(23.8)
(0.2)
(16.2)
(32.3)
(0.1)
(55.5) $
44.0 $
13.2
(26.9)
83.6
0.9
70.8
Net cash provided by operating activities. Net cash provided by operating activities was $16.9 million and $92.6 million for
the fiscal years 2022 and 2021, respectively. The decrease in cash provided by operating activities was primarily due to increased
purchases of inventory during fiscal year 2022.
Net cash used in investing activities. Cash used in investing activities was $48.4 million and $16.2 million for the fiscal years
2022 and 2021, respectively. The increase in cash used in investing activities was primarily due to the purchase of investments and
higher capital spending during the twelve months ended September 30, 2022.
Net cash (used in) provided by financing activities. Net cash used in financing activity for the twelve months ended
September 30, 2022, was $23.8 million and was primarily due to our early redemption of $27 million of our Senior Secured Notes.
Net cash used in financing activities for the twelve months ended October 1, 2021, was $32.3 million and was primarily due to our
early redemption of $30 million of our Senior Secured Notes.
Days Sales Outstanding
Trade accounts receivable days sales outstanding (“DSO”) was 68 days and 62 days at September 30, 2022 and October 1,
2021, respectively. Our accounts receivable and DSO are impacted by a number of factors, primarily including the timing of product
shipments, collections performance, payment terms, the mix of revenues from different regions and the effects of economic instability.
43
Table of Contents
Contractual Obligations
The following table summarizes, as of September 30, 2022, the total amount of future payments due in various future periods:
(In millions)
Lease obligations
Principal payments on borrowings
dpiX fixed cost commitment
Dividends to MeVis noncontrolling interest
Supplier equipment acquisition
Development and share purchase commitments
Payments Due by Period
Total
Fiscal Year
2023
Fiscal Years
2024-2025
Fiscal Years
2026-2027
Beyond
$
26.9 $
5.4 $
9.1 $
5.9 $
449.7
3.3
3.1
2.5
6.6
2.1
3.3
0.4
2.5
6.6
202.8
244.8
—
0.9
—
—
—
0.9
—
—
Total
$
492.1 $
20.3 $
212.8 $
251.6 $
6.5
—
—
0.9
—
—
7.4
We lease office space under non-cancelable operating leases. For further information on our operating leases, see Note 3,
Leases, included in the accompanying Notes to Consolidated Financial Statements.
For further discussion regarding our borrowings, see Note 9, Borrowings, included in the accompanying Notes to
Consolidated Financial Statements.
In October 2013, we entered into an amended agreement with dpiX and other parties that, among other things, provides us
with the right to 50% of dpiX’s total manufacturing capacity produced after January 1, 2014. The amended agreement requires us to
pay for 50% of the fixed costs (as defined in the amended agreement), as determined at the beginning of each calendar year. For the
remainder of calendar year 2022, we estimate that we have fixed cost commitments of $3.3 million related to this amended agreement.
The fixed cost commitment for future periods will be determined and approved by the dpiX board of directors at the beginning of each
calendar year. The amended agreement will continue unless the ownership structure of dpiX changes (as defined in the amended
agreement).
In October 2015, pursuant to a Domination and Profit and Loss Transfer Agreement (the “MeVis Agreement”), we
committed to grant the noncontrolling shareholders of MeVis: (1) an annual recurring net compensation of €0.95 per MeVis share;
and, (2) a put right for their MeVis shares at €19.77 per MeVis share. The annual net payment will continue for the life of the MeVis
Agreement, which we anticipate will continue for as long as we remain as the controlling shareholder of MeVis. As of September 30,
2022, noncontrolling shareholders together held approximately 0.5 million shares of MeVis, representing 26.3% of the outstanding
shares.
Varex entered into a purchase agreement with a supplier to acquire certain equipment and intellectual property from the
supplier that is utilized to manufacture X-ray cables utilized in Varex's products. For more information about our supplier equipment
acquisition, see Note 12, Commitments and Contingencies, included in the accompanying Notes to Consolidated Financial Statements.
In the fourth quarter of fiscal year 2022, the Company entered into a development agreement and a share purchase agreement
with a third-party company. For more information about these agreements, see Note 12, Commitments and Contingencies, included in
the accompanying Notes to Consolidated Financial Statements.
Contingencies
From time to time, we are a party to or otherwise involved in legal proceedings, government inspections, investigations,
customs and duty audits, and other claims and contingency matters, both inside and outside the United States, arising in the ordinary
course of its business or otherwise. We accrue amounts for probable losses, to the extent they can be reasonably estimated, that we
believe are adequate to address any liabilities related to legal proceedings as well as other loss contingencies that we believe will result
in a probable loss (including, among other things, probable settlement value). A loss or a range of loss is disclosed when it is
reasonably possible that a material loss will be incurred and can be estimated or when it is reasonably possible that the amount of a
loss, when material, will exceed the recorded provision. We did not have any material contingent liabilities as of September 30, 2022
and October 1, 2021. Legal expenses are expensed as incurred.
See Part 1, Item 3 of this Annual Report for additional information regarding legal proceedings and Note 12, Commitments
and Contingencies, in the Notes to Consolidated Financial Statements for further information regarding certain of our contractual
obligations and contingencies, which discussion is incorporated herein by reference.
44
Table of Contents
Critical Accounting Policies and Estimates
The preparation of our consolidated financial statements and related disclosures in conformity with GAAP requires us to
make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses. These estimates and
assumptions are based on historical experience and on various other factors that we believe are reasonable under the circumstances.
Our critical accounting policies that are affected by accounting estimates require us to use judgments, often as a result of the need to
make estimates and assumptions regarding matters that are inherently uncertain, and actual results could differ materially from these
estimates.
We periodically review our accounting policies, estimates and assumptions and make adjustments when facts and
circumstances dictate. Such accounting policies require us to use judgments, often as a result of the need to make estimates and
assumptions regarding matters that are inherently uncertain, and actual results could differ materially from these estimates. Our critical
accounting policies that are affected by accounting estimates include valuation of inventories, assessment of recoverability of goodwill
and intangible assets, and income taxes. Note 1, Summary of Significant Accounting Policies, of the Notes to Consolidated Financial
Statements, Item 8 of this Form 10-K describes the significant accounting policies and methods used in the preparation of the
Company’s consolidated financial statements. Such accounting policies require us to use judgments, often as a result of the need to
make estimates and assumptions regarding matters that are inherently uncertain, and actual results could differ materially from these
estimates. For a discussion of how these estimates and other factors may affect our business, see Item 1A. “Risk Factors.”
Inventories, net
Inventory is valued at the lower of cost or net realizable value. Costs include materials, labor, external service and
manufacturing overhead and is computed using standard cost (which approximates actual cost) on a first-in-first-out basis. We
evaluate the carrying value of our inventories taking into consideration such factors as historical and anticipated future sales compared
to quantities on hand and the prices we expect to obtain for products in our various markets. We adjust excess and obsolete inventories
to net realizable value, and write-downs of excess and obsolete inventories are recorded as a component of cost of revenues.
Goodwill and Intangible Assets
Goodwill is initially recorded when the purchase price paid for a business acquisition exceeds the estimated fair value of the
net identified tangible and intangible assets acquired. Our future operating performance will be impacted by the future amortization of
these acquired intangible assets and potential impairment charges related to these intangibles or to goodwill if indicators of impairment
exist. The allocation of the purchase price from business acquisitions to goodwill and intangible assets could have a material impact on
our future operating results. In addition, the allocation of the purchase price of the acquired businesses to goodwill and intangible
assets requires us to make significant estimates and assumptions, including estimates of future cash flows expected to be generated by
the acquired assets and the appropriate discount rate for those cash flows. Should conditions differ from management’s estimates at the
time of the acquisition, material write-downs of intangible assets and/or goodwill may be required, which would adversely affect our
operating results.
We evaluate goodwill for impairment at least annually or whenever an event occurs or circumstances change that would more
likely than not reduce the fair value of a reporting unit below its carrying amount. The evaluation includes consideration of qualitative
factors including industry and market considerations, overall financial performance, and other relevant events and factors affecting the
reporting unit. If we determine that a quantitative analysis is necessary, we perform a quantitative analysis that consists of a
comparison of the fair value of a reporting unit against its carrying amount, including the goodwill allocated to each reporting unit. We
determine the fair value of our reporting units based on a combination of income and market approaches. The income approach is
based on the present value of estimated future cash flows of the reporting units and the market approach is based on a market multiple
calculated for each reporting unit based on market data of other companies engaged in similar business. If the carrying amount of the
reporting unit is in excess of its fair value, the difference between the fair value and carrying amount is recorded as an impairment
loss. The impairment test for intangible assets with indefinite useful lives, if any, consists of a comparison of fair value to carrying
value, with any excess of carrying value over fair value being recorded as an impairment loss.
In fiscal years 2022, 2021 and 2020, we performed the annual goodwill impairment test for our two reporting units and found
no impairment. We performed the annual goodwill analysis as of the first day of the fourth quarter of each fiscal year (using balances
as of the end of the third quarter of that fiscal year). For both reporting units, based upon the annual goodwill analysis that we
performed as of the first day of the fourth quarter of the respective fiscal years, either a quantitative analysis of the impairment test
was not completed based on evaluation of qualitative factors or, if quantitative analysis was completed, the fair value was substantially
in excess of carrying value. However, significant changes in our projections of our operating results or other factors could cause us to
make interim assessments of impairments in any quarter that could result in some or all of the goodwill being impaired.
45
Table of Contents
Fair value determinations require considerable judgment and are sensitive to changes in underlying assumptions, estimates,
and market factors. Estimating the fair value of individual reporting units requires us to make assumptions and estimates regarding our
future plans, as well as industry, economic, and regulatory conditions. These assumptions and estimates include estimated future
annual net cash flows, income tax rates, discount rates, revenue growth rates, forecasted gross margins, market multiples, terminal
value and other market factors. This fair value measurement was based on significant inputs not observable in the market and thus
represents a Level 3 fair value measurement. If current expectations of future revenue growth rates and forecasted gross margins, both
in size and timing, are not met, if market factors outside of our control, such as discount rates, change, if market multiples decline, or
if management’s expectations or plans otherwise change, including as a result of the development of our global five-year operating
plan, then one or more of our reporting units might become impaired in the future. The Company will continue to monitor the financial
performance of and assumptions for its reporting units. A future impairment charge for goodwill could have a material effect on the
Company's consolidated financial position and results of operations.
We will continue to make assessments of impairment on an annual basis or more frequently if indicators of potential
impairment arise.
Taxes on Income
Current income tax expense or benefit is the amount of income taxes expected to be payable or receivable for the current
year. Deferred income tax liabilities or assets are established for the expected future tax consequences resulting from the differences in
financial reporting and tax bases of assets and liabilities. Future changes in tax regulation can have a material impact, including tax
rate changes or the realization of deferred tax assets. A valuation allowance is provided if it is more likely than not that some or all of
the deferred tax assets will not be realized. U.S. tax reform introduced a limitation of business interest deduction under IRC Section
163(j), which may be difficult to utilize without significant taxable income. Also, net operating loss carryforwards in jurisdictions with
current losses provide uncertainty for realization. In addition, we provide reserves for uncertain tax positions when such tax positions
do not meet the recognition thresholds or measurement standards prescribed by the authoritative guidance for accounting for income
taxes. A portion of the U.S. general business tax credits for research outside of the financial statement line for research and
development ("R&D") have a small degree of uncertainty. A reasonable reserve is maintained on the uncertain portion until either the
Internal Revenue Service chooses to audit or the statute of limitation expires. A reserve for R&D is typical for companies who
calculate and utilize this general business credit. Amounts for uncertain tax positions are adjusted in periods when new information
becomes available or when positions are effectively settled. Interest and penalties related to uncertain tax positions are recognized as a
component of income tax expense.
During fiscal year 2022, the Company received cash tax refunds related to net operating loss carryback claims for U.S. losses
incurred in fiscal year 2020. On August 16, 2022, the Inflation Reduction Act was enacted in response to rising inflation. The
Company does not meet financial statement thresholds for the minimum tax applicability and does not anticipate other provisions will
have a material impact. The 2017 Tax Cuts and Jobs Act included a provision requiring research and development expenditures to be
capitalized for tax years beginning after December 31, 2021, which is effective for the Company starting in fiscal year 2023. The
Company has a significant amount of research and development expenditures and expects increased cash taxes in the early effective
years related to this provision.
Recent Accounting Standards or Updates Not Yet Effective
See Note 1, Summary of Significant Accounting Policies, of the Notes to Consolidated Financial Statements for a description
of recent accounting standards, including the expected dates of adoption and the estimated effects on our consolidated financial
statements.
Backlog
Backlog is the accumulation of all orders for which revenues have not been recognized and are still considered valid. Backlog
also includes a small portion of billed service contracts that are included in deferred revenue. Our estimated total backlog at
September 30, 2022 was approximately $425 million.
Orders may be revised or canceled, either according to their terms or as customers' needs change. Consequently, it is difficult
to predict with certainty the amount of backlog that will result in revenues. We perform a quarterly review to verify that outstanding
orders in the backlog remain valid. Aged orders that are not expected to be converted to revenues are deemed dormant and are
reflected as a reduction in the backlog amounts in the period identified.
In addition to orders for which revenues have not been recognized and are still considered valid, we have pricing agreements
with many of our established customers that span multi-year periods. These pricing agreements include volume ranges under which
orders are placed.
46
Table of Contents
Item 7A. Quantitative and Qualitative Disclosures about Market Risks
We are exposed to four primary types of market risks: foreign currency exchange rate risk, credit and counterparty risk,
interest rate risk and commodity price risk.
Foreign Currency Exchange Rate Risk
A significant portion of our customers are outside the United States, while our financial statements are denominated, and our
products are generally priced in U.S. Dollars. A strong U.S. Dollar may result in pricing pressure for our customers that are located
outside the United States and that conduct their businesses in currencies other than the U.S. Dollar. Such pricing pressure has caused,
and could continue to cause, some of our customers to ask for discounted prices, delay purchasing decisions, or consider moving to in-
sourcing supply of components or migrating to lower cost alternatives. In addition, because our business is global and some payments
may be made in local currency, fluctuations in foreign currency exchange rates can impact our revenues and expenses and/or the
profitability in U.S. Dollars of products and services that we provide in foreign markets.
We may enter into foreign currency forward and option contracts with financial institutions to protect against foreign
exchange risks associated with certain existing assets and liabilities, net investments in foreign subsidiaries, and forecast purchases
denominated in foreign currencies. We may hedge portions of forecasted foreign currency exposure, typically for one to three months.
In addition, we hold a cross-currency swap between the Euro and U.S. Dollar as a net investment hedge of our acquisition of Direct
Conversion. Depending on the spot rate between the Euro and U.S. Dollar at the time of settlement and whether we have sufficient
Euros available, we may have to borrow incrementally in U.S. Dollars to settle this obligation. Additionally, we may choose not to
hedge certain foreign exchange exposures for a variety of reasons including, but not limited to, accounting considerations, the
prohibitive economic cost of hedging particular exposures, or due to natural offsets among the different exposures.
Credit and Counterparty Risk
We use a centralized approach to manage substantially all of our cash and to finance our operations. Our cash and cash
equivalents and marketable securities may be exposed to a concentration of credit risk, and we may also be exposed to credit risk and
interest rate risk to the extent that we enter into credit facilities.
We perform ongoing credit evaluations of our customers and we maintain what we believe to be strong credit controls in
evaluating and granting customer credit, including performing ongoing evaluations of our customers’ financial condition and
creditworthiness and often using letters of credit or requiring certain customers to provide a down payment.
Interest Rate Risk
Borrowings under our ABL Facility bear interest at floating interest rates. At September 30, 2022, we had no borrowings
subject to floating interest rates. See Note 9, Borrowings, of the Notes to Consolidated Financial Statements for further information.
Our exposure to interest rate risk also is related to our interest-bearing assets, primarily our cash and cash equivalents and
marketable securities. Fixed rate securities may have their market value adversely affected due to a rise in interest rates, while floating
rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income
may fluctuate due to changes in interest rates or we may suffer losses in principal if we are forced to sell securities that decline in
market value due to changes in interest rates.
Commodity Price Risk
We are exposed to market risks related to volatility in the prices of raw materials used in our products. The prices of these
raw materials fluctuate in response to changes in supply and demand fundamentals and our product margins and level of profitability
tend to fluctuate with changes in these raw materials prices. We try to protect against such volatility through various business
strategies. During the fiscal year ended September 30, 2022, we did not have any commodity derivative instruments in place to
manage our exposure to price changes.
Item 8. Financial Statements and Supplementary Data.
The Consolidated Financial Statements and Schedules listed in the Index to Consolidated Financial Statements, Schedules
and Exhibits on page F-1 are filed as part of this Annual Report and incorporated in this Item 8 by reference.
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.
None.
47
Table of Contents
Item 9A. Controls and Procedures.
Evaluation of Disclosure Controls and Procedures
Our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of
1934, as amended (the "Exchange Act") are designed to provide reasonable assurance that information required to be disclosed in our
periodic reports that we file or submit under the Exchange Act are recorded, processed, summarized, and reported within the time
periods specified in the rules and forms of the Securities and Exchange Commission and that such information is accumulated and
communicated to our management, including our principal executive and financial officers, as appropriate to allow timely decisions
regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed, and operated,
can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the
cost-benefit relationship of possible controls and procedures. Based on this evaluation, the Chief Executive Officer (CEO) and Chief
Financial Officer (CFO) have concluded that our disclosure controls and procedures were effective as of September 30, 2022.
Management's Annual Report on Internal Control Over Financial Reporting
Management, under the supervision of our CEO and CFO, is responsible for establishing and maintaining adequate internal
control over our financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Our internal control over
financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of
financial statements for external purposes in accordance with generally accepted accounting principles. Our management evaluated the
design and operating effectiveness of our internal control over financial reporting based on the criteria established in the Internal
Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the
"COSO framework" (2013)). All internal control systems, no matter how well designed, have inherent limitations. Accordingly, even
effective internal controls and procedures can provide only reasonable assurance with respect to financial statement preparation and
presentation.
Under the supervision and with the participation of our management, we conducted an evaluation of the effectiveness of our
internal control over financial reporting as of September 30, 2022. Based on this evaluation, our management concluded that we
maintained effective internal control over financial reporting as of September 30, 2022.
The effectiveness of our internal control over financial reporting as of September 30, 2022 has been audited by Deloitte &
Touche LLP, an independent registered public accounting firm, as stated in their report, which appears below in “Item 9a. Controls
and Procedures".
Changes in Internal Control Over Financial Reporting
There were no changes to our internal control over financial reporting during the quarter ended September 30, 2022, that have
materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
48
Table of Contents
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and the Board of Directors of Varex Imaging Corporation
Opinion on Internal Control over Financial Reporting
We have audited the internal control over financial reporting of Varex Imaging Corporation and subsidiaries (the “Company”) as of
September 30, 2022, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of
Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects,
effective internal control over financial reporting as of September 30, 2022, based on criteria established in Internal Control —
Integrated Framework (2013) issued by COSO.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States)
(PCAOB), the consolidated financial statements as of and for the year ended September 30, 2022 of the Company and our report dated
November 18, 2022, expressed an unqualified opinion on those financial statements.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of
the effectiveness of internal control over financial reporting, included in the accompanying Management's Annual Report on Internal
Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial
reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with
respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities
and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit
to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness
exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such
other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our
opinion.
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of
financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting
principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the
maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the
company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in
accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in
accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding
prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect
on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections
of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in
conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Deloitte & Touche LLP
Salt Lake City, Utah
November 18, 2022
49
Table of Contents
Item 9B. Other Information
None.
Item 9C. Disclosures Regarding Foreign Jurisdictions that Prevent Inspections.
None.
PART III
Item 10. Directors, Executive Officers and Corporate Governance.
Directors and Executive Officers
The information required by this item with respect to our executive officers is set forth in Part I of this Annual Report on
Form 10-K and information relating to the availability of our code of conduct for executive officers and directors is set out below. The
other information required by this item is incorporated by reference from our definitive proxy statement for the 2023 Annual Meeting
of Stockholders. Our definitive proxy statement for the 2023 Annual Meeting of Stockholders will be filed with the SEC no later than
120 days after September 30, 2022.
Code of Conduct
We have adopted a Code of Conduct that applies to all of our executive officers and directors. The Code of Conduct is
available on our website at http://www.vareximaging.com.
We intend to comply with the disclosure requirements under Item 5.05(c) of Form 8-K regarding an amendment to, or waiver
from, a provision of the Code of Conduct that applies to our principal executive officer, principal financial officer, principal
accounting officer or persons performing similar functions by posting such information on our website, specified above.
Item 11. Executive Compensation
The information required by this item is incorporated by reference from our definitive proxy statement for the 2023 Annual
Meeting of Stockholders under the caption “Executive Compensation.”
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
Equity Compensation Plan Information
The following table provides information as of September 30, 2022 with respect to the shares of our common stock that may
be issued under our existing equity compensation plans.
Plan Category (amounts in thousands except per share data)
Equity compensation plans approved by security holders
Equity compensation plans not approved by security holders
Total
Number of securities to
be issued upon exercise
of outstanding options,
warrants and rights (1)
(a)
Weighted average
exercise price of
outstanding options,
warrants, and rights (2)
(b)
Number of securities
remaining available for
future issuance under
equity compensation
plans (3) (excluding
securities reflected in
columns (a) and (b))
3,947 $
—
3,947 $
28.97
—
28.97
3,981
—
3,981
(1) Consists of stock options, restricted stock units ("RSUs"), and deferred stock units ("DSUs") granted under the Varex Imaging Corporation 2017 Omnibus Stock
Plan and the 2020 Stock Plan. Excludes purchase rights under the ESPP.
(2) The weighted average exercise price does not take into account the shares issuable upon vesting of outstanding RSUs and DSUs, which have no exercise price.
(3) Includes 3,157 thousand shares available for future issuance under the 2020 Stock Plan, and also includes 824 thousand shares available for future issuance under
the ESPP. Shares available for issuance under the ESPP are subject to the number of shares remaining in the share reserve, and the maximum number of shares
purchasable by any participant on any one purchase date for any purchase period, which may not exceed 2,000 shares.
50
Table of Contents
The information required by this item with respect to the security ownership of certain beneficial owners and the security
ownership of directors and executive officers is incorporated by reference from our definitive proxy statement for the 2023 Annual
Meeting of Stockholders under the caption “Stock Ownership—Beneficial Ownership of Certain Stockholders, Directors and
Executive Officers.”
Item 13. Certain Relationships and Related Transactions and Director Independence.
The information required by this item with respect to certain relationships and related transactions is incorporated by
reference from our definitive proxy statement for the 2023 Annual Meeting of Stockholders under the caption “Certain Relationships
and Related Transactions.” The information required by this item with respect to director and committee member independence is
incorporated by reference from our definitive proxy statement for the 2023 Annual Meeting of Stockholders under the caption
“Proposal - Election of Directors.”
Item 14. Principal Accountant Fees and Services.
The information required by this item is incorporated by reference from our definitive proxy statement for the 2023 Annual
Meeting of Stockholders under the caption “Proposal - Ratification of the Appointment of Our Independent Registered Public
Accounting Firm.”
51
Table of Contents
Item 15. Exhibits, Consolidated Financial Statements and Financial Statement Schedules.
Documents filed as part of this annual report include:
PART IV
1.
2.
3.
Consolidated Financial Statements. We have filed the consolidated financial statements listed in the index to
Consolidated Financial Statements, Schedules and Exhibits on page F-1 as part of this annual report on Form 10-K.
Financial Statement Schedules and Other. All financial statement schedules have been omitted because they are not
applicable, or not material or the required information is shown in the consolidated financial statements or the notes
thereto.
Exhibits. The exhibits listed below are filed as part of this annual report on Form 10-K.
Exhibit
Number
Description
2.1*
2.2*
3.1*
3.2*
4.1
4.2*
4.3*
10.1*
10.2*
10.3*
10.4*
10.5*
Separation and Distribution Agreement, dated as of January 27, 2017, by and between Varian and (incorporated
by reference to Exhibit 2.1 to the Company’s Current Report on Form 8-K filed January 30, 2017).
Assignment and Assumption Agreement, dated January 27, 2017, by and between Varian Medical Systems, Inc.
and Varex Imaging Corporation (incorporated by reference to Exhibit 2.3 to the Company’s Quarterly Report
on Form 10-Q filed May 12, 2017).
Amended and Restated Certificate of Incorporation, dated January 27, 2017 (as corrected December 11, 2017)
(incorporated by reference to Exhibit 3.1 to the Company’s Annual Report on Form 10-K filed November 27,
2018).
Amended and Restated Bylaws of the Company, as amended February 11, 2021 (incorporated by reference to
Exhibit 3.1 to the Company’s Current Report on Form 8-K filed February 16, 2021).
Information required by Item 202(a) through (d) and (f) of Regulation S-K for each class of Company securities
that is registered under Section 12 of the Exchange Act.
Indenture, dated June 9, 2020, by and among Varex Imaging Corporation and Wells Fargo Bank, National
Association, as Trustee, including form of 4.00% Convertible Senior Notes due 2025 (incorporated by reference
to Exhibit 4.1 to the Company’s Current Report on Form 8-K filed June 9, 2020).
Indenture, dated as of September 30, 2020, by and among Varex Imaging Corporation, the Guarantors party
thereto and Wells Fargo Bank, National Association, as trustee and collateral agent, including the form of
7.875% Senior Secured Notes due 2027 as Exhibit A (incorporated by reference to Exhibit 4.3 to the
Company’s Current Report on Form 10-K filed November 30, 2021).
Transition Services Agreement, dated as of January 27, 2017, by and between Varian and Company
(incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed January 30,
2017).
Tax Matters Agreement, dated as of January 27, 2017 by and between Varian and Company (incorporated by
reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed January 30, 2017).
Employee Matters Agreement, dated as of January 27, 2017, by and between Varian and Company
(incorporated by reference to Exhibit 10.3 to the Company’s Current Report on Form 8-K filed January 30,
2017).
Intellectual Property Matters Agreement, dated as of January 27, 2017, by and between Varian and Company
(incorporated by reference to Exhibit 10.4 to the Company’s Current Report on Form 8-K filed January 30,
2017).
Trademark License Agreement, dated as of January 27, 2017, by and between Varian and Company
(incorporated by reference to Exhibit 10.5 to the Company’s Current Report on Form 8-K filed January 30,
2017).
10.6*†
Varex Imaging Corporation 2017 Omnibus Stock Plan (incorporated by reference to Exhibit 99.1 to the
Company’s Form S-8, filed January 27, 2017).
52
Table of Contents
10.7*†
10.8*†
10.9*†
10.10*†
10.11†
10.12*†
10.13*†
10.14*†
10.15*†
10.16*†
10.17*†
10.18*
10.19*
10.20*
10.21*
10.22*
10.23*
10.24*
Form of Nonqualified Stock Option Agreement under the 2017 Omnibus Stock Plan (incorporated by reference
to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed February 16, 2017).
Form of Restricted Stock Unit Award Agreement under the 2017 Omnibus Stock Plan (incorporated by
reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed February 16, 2017).
Varex Imaging Corporation 2017 Employee Stock Purchase Plan (incorporated herein by reference to Exhibit
99.2 to the Company’s Form S-8, filed January 27, 2017).
Varex Imaging Corporation Management Incentive Plan (incorporated by reference to Exhibit 10.9 to the
Company’s Current Report on Form 8-K filed January 30, 2017).
Form of Change in Control Agreement (incorporated by reference to Exhibit 10.11 to the Company’s Annual
Report on Form 10-K filed November 19, 2021).
Form of Indemnification Agreement (incorporated by reference to Exhibit 10.11 to the Company’s Current
Report on Form 8-K filed January 30, 2017).
Varex Imaging Corporation 2016 Deferred Compensation Plan (incorporated by reference to Exhibit 10.6 to
Amendment No. 2 to Form 10 filed by the Company on December 8, 2016).
Varex Imaging Corporation Frozen Deferred Compensation Plan (incorporated by reference to Exhibit 10.7 to
Amendment No. 2 to Form 10 filed by the Company on December 8, 2016).
Form of Grant Agreement for Deferred Stock Units under the 2017 Omnibus Stock Plan (incorporated by
reference to Exhibit 10.17 to the Company's Annual Report on Form 10-K filed December 13, 2017.
Form of Grant Agreement for Deferred Stock Units under the 2017 Omnibus Stock Plan (incorporated by
reference to Exhibit 10.18 to the Company's Annual Report on Form 10-K filed December 20, 2019).
Varex Imaging Corporation 2020 Omnibus Stock Plan, including the Form of Nonqualified Stock Option
Agreement, the Form of Restricted Stock Unit Agreement and the Form of Grant Agreement – Deferred Stock
Units (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on
February 14, 2020).
Credit Agreement dated as of September 30, 2020, by and among Varex Imaging Corporation, Varex Imaging
West, LLC, Varex Imaging Deutschland AG, the Guarantors party thereto and Bank of America N.A., as
administrative and collateral agent, and the lenders party thereto (incorporated by reference to Exhibit 10.18 to
the Company’s Current Report on Form 10-K filed November 30, 2021).
Form of Base Convertible Bond Hedge Confirmation, dated June 4, 2020, between Varex Imaging Corporation
and each of the counterparties thereto (incorporated by reference to Exhibit 10.1 to the Company's Current
Report on Form 8-K filed June 9, 2020).
Form of Base Warrant Confirmation, dated June 4, 2020, between Varex Imaging Corporation and each of the
counterparties thereto (incorporated by reference to Exhibit 10.2 to the Company's Current Report on Form 8-K
filed June 9, 2020).
Form of Additional Convertible Bond Hedge Confirmation, dated June 5, 2020, between Varex Imaging
Corporation and each of the counterparties thereto (incorporated by reference to Exhibit 10.3 to the Company's
Current Report on Form 8-K filed June 9, 2020).
Form of Additional Warrant Confirmation, dated June 5, 2020, between Varex Imaging Corporation and each of
the Counterparties (incorporated by reference to Exhibit 10.4 to the Company's Current Report on Form 8-K
filed June 9, 2020).
LIBOR Transition Amendment, dated as of March 9, 2022, among Varex Imaging Corporation, Varex Imaging
West, LLC, Varex Imaging Deutschland AG, the other Loan Parties, the Lenders, Issuing Banks and Swing
Line Lender, and BANK OF AMERICA, N.A., as administrative agent and collateral agent.
Share Purchase Agreement dated March 21, 2019 between Varex Imaging Corporation, Varex Imaging
Investments, B.V. and certain shareholders of Direct Conversions AB (publ) (incorporated by reference to
Exhibit 10.1 to Company's Quarterly Report on Form 10-Q filed on May 8, 2019).
10.25*†
Offer Letter dated June 8, 2020 by Varex Imaging Corporation to Shubham Maheshwari (incorporated by
reference to Exhibit 10.25 to the Company’s Current Report on Form 10-K filed November 30, 2021).
21.1
List of Subsidiaries as of November 14, 2022
53
Table of Contents
23.1
23.2
31.1
31.2
32.1
32.2
101.INS
101.SCH
101.CAL
101.DEF
101.LAB
101.PRE
104
*
†
Consent of Deloitte & Touche LLP, Independent Registered Public Accounting Firm
Consent of PricewaterhouseCoopers LLP, Independent Registered Public Accounting Firm
Chief Executive Officer Certification Pursuant to Rule 13a-14(a) of the Securities Exchange Act.
Chief Financial Officer Certification Pursuant to Rule 13a-14(a) of the Securities Exchange Act.
Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act
of 2002.
Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act
of 2002.
XBRL Instance Document - the instance document does not appear in the Interactive Data File because its
XBRL tags are embedded within the Inline XBRL document.
XBRL Taxonomy Extension Schema Document
XBRL Taxonomy Extension Calculation Linkbase Document
XBRL Taxonomy Extension Definition Linkbase Document
XBRL Taxonomy Extension Label Linkbase Document
XBRL Taxonomy Extension Presentation Linkbase Document
Cover Page Interactive Data File (formatted as inline XBRL and contained in Exhibits 101).
Incorporated herein by reference
Management contract or compensatory agreement.
Item 16. Form 10-K Summary
None
54
Table of Contents
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report
to be signed on its behalf by the undersigned thereunto duly authorized.
SIGNATURES
Date:
November 18, 2022
By:
VAREX IMAGING CORPORATION
/s/ Shubham Maheshwari
Shubham Maheshwari
Chief Financial Officer
(Duly Authorized Officer and Principal Financial Officer)
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on
behalf of the registrant and in the capacities and on the dates indicated.
Signature
Capacity
Date
/s/ SUNNY S. SANYAL
Sunny S. Sanyal
/s/ SHUBHAM MAHESHWARI
Shubham Maheshwari
President and Chief Executive Officer and Director
(Principal Executive Officer)
November 18, 2022
Chief Financial Officer
(Principal Financial and Accounting Officer)
November 18, 2022
/s/ RUEDIGER NAUMANN-ETIENNE Chairman of the Board
November 18, 2022
Ruediger Naumann-Etienne
/s/ KATHLEEN L. BARDWELL
Director
November 18, 2022
Kathleen L. Bardwell
/s/ JOCELYN D. CHERTOFF
Director
November 18, 2022
Jocelyn D. Chertoff
/s/ TIMOTHY E. GUERTIN
Timothy E. Guertin
/s/ JAY K. KUNKEL
Jay K. Kunkel
Director
Director
/s/ WALTER M ROSEBROUGH, JR.
Walter M Rosebrough, Jr.
Director
/s/ CHRISTINE A. TSINGOS
Christine A. Tsingos
Director
November 18, 2022
November 18, 2022
November 18, 2022
November 18, 2022
55
Table of Contents
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Report of Independent Registered Public Accounting Firm (PCAOB ID No. 34)
Report of Independent Registered Public Accounting Firm (PCAOB ID No. 238)
Consolidated Statements of Operations for the fiscal years ended 2022, 2021 and 2020
Consolidated Statements of Comprehensive Income (Loss) for the fiscal years ended 2022, 2021 and 2020
Consolidated Balance Sheets as of the end of fiscal years 2022 and 2021
Consolidated Statements of Stockholders' Equity for the fiscal years 2022, 2021 and 2020
Consolidated Statements of Cash Flows for the fiscal years ended 2022, 2021 and 2020
Notes to Consolidated Financial Statements
F-1
F-3
F-4
F-5
F-6
F-7
F-8
F-9
56
Table of Contents
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and the Board of Directors of Varex Imaging Corporation
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Varex Imaging Corporation and subsidiaries (the "Company") as of
September 30, 2022 and October 1, 2021, the related consolidated statements of operations, comprehensive income (loss),
stockholders' equity, and cash flows for each of the two years in the period ended September 30, 2022, and the related notes
(collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects,
the financial position of the Company as of September 30, 2022 and October 1, 2021, and the results of its operations and its cash
flows for each of the two years in the period ended September 30, 2022, in conformity with accounting principles generally accepted
in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States)
(PCAOB), the Company's internal control over financial reporting as of September 30, 2022, based on criteria established in Internal
Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our
report dated November 18, 2022, expressed an unqualified opinion on the Company's internal control over financial reporting.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the
Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to
be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and
regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit
to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud.
Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to
error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence
regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used
and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe
that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was
communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material
to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of
critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by
communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or
disclosures to which it relates.
Inventories – Valuation of Excess and Obsolete Inventories — Refer to Note 1 to the financial statements
Critical Audit Matter Description
Inventories are valued at the lower of cost or net realizable value. The Company evaluates the carrying value of its inventories taking
into consideration such factors as historical sales and anticipated future sales compared to quantities on hand and the prices the
Company expects to obtain for products in its various markets. The Company adjusts excess and obsolete inventories to net realizable
value, and write-downs of excess and obsolete inventories are recorded as a component of cost of revenues. As of September 30, 2022,
the Company’s inventories, net, were $303.2 million. For the year ended September 30, 2022, inventory write-downs were $6.4
million. Estimating the amount of excess and obsolete inventories involves significant judgment and estimates.
We identified the valuation of excess and obsolete inventories as a critical audit matter because of management’s significant judgment
and estimates in determining the valuation of excess and obsolete inventories primarily around anticipated future sales. This required a
high degree of auditor judgment and an increased extent of effort.
How the Critical Audit Matter Was Addressed in the Audit
F-1
Table of Contents
Our audit procedures related to management’s estimates of the valuation of excess and obsolete inventories included the following,
among others:
• We tested the effectiveness of controls over the valuation of excess and obsolete inventories. The controls we tested included
those over the calculation, and accuracy and completeness of underlying data used in the calculation, including historical
sales and anticipated future sales by product, product quantities on hand, and applicable prices.
• We evaluated management’s ability to accurately estimate the valuation of excess and obsolete inventories by comparing
actual inventory write-downs to management’s historical estimates.
• We performed procedures to evaluate the reasonableness of management’s methods, assumptions, and judgments used in
developing their estimate of the valuation of excess and obsolete inventories, which included consideration of historical sales,
anticipated future sales, and information obtained from production planning and supply chain employees.
• We tested the accuracy and completeness of the underlying data used in the Company’s calculations of the valuation of
excess and obsolete inventories, including historical usage, anticipated future sales, quantities on hand, and pricing
• We assessed the reasonableness of the assumptions used in the calculations of the valuation of excess and obsolete
inventories by developing an independent expectation and comparing our independent expectation to the results of the
Company’s calculations.
• We tested the mathematical accuracy of the Company’s calculations of excess and obsolete inventories.
/s/ Deloitte & Touche LLP
Salt Lake City, Utah
November 18, 2022
We have served as the Company’s auditor since 2021.
F-2
Table of Contents
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Varex Imaging Corporation
Opinion on the Financial Statements
We have audited the consolidated statements of operations, of comprehensive income (loss), of stockholders’ equity and of cash flows
of Varex Imaging Corporation and its subsidiaries (the "Company") for the year ended October 2, 2020, including the related notes
(collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly,
in all material respects, the results of operations and cash flows of the Company for the year ended October 2, 2020 in conformity with
accounting principles generally accepted in the United States of America.
Change in Accounting Principle
As discussed in Note 3 to the consolidated financial statements, the Company changed the manner in which it accounts for leases as of
September 28, 2019.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an
opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the
Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the
Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange
Commission and the PCAOB.
We conducted our audit of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards
require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free
of material misstatement, whether due to error or fraud.
Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements,
whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test
basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audit also included evaluating the
accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the
consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.
/s/ PricewaterhouseCoopers LLP
Salt Lake City, Utah
November 30, 2020
We served as the Company's auditor from 2016 to 2020.
F-3
Table of Contents
VAREX IMAGING CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
(In millions, except per share amounts)
Revenues, net
Cost of revenues
Gross profit
Operating expenses:
Research and development
Selling, general and administrative
Impairment of intangible assets
Total operating expenses
Operating income (loss)
Interest income
Interest expense
Other expense, net
Interest and other expense, net
Income (loss) before taxes
Income tax expense (benefit)
Net income (loss)
Less: Net income attributable to noncontrolling interests
Net income (loss) attributable to Varex
Net income (loss) per common share attributable to Varex
Basic
Diluted
Weighted average common shares outstanding
$
$
$
Basic
Diluted
2022
Fiscal Years
2021
2020
$
859.4 $
818.1 $
575.9
283.5
77.0
118.3
—
195.3
88.2
0.4
(39.8)
(4.3)
(43.7)
44.5
13.7
30.8
0.5
546.6
271.5
71.9
125.5
—
197.4
74.1
0.1
(42.1)
(3.5)
(45.5)
28.6
10.7
17.9
0.5
30.3 $
17.4 $
0.76 $
0.73 $
39.8
41.6
0.44 $
0.43 $
39.3
40.3
738.3
548.1
190.2
78.9
142.2
2.8
223.9
(33.7)
0.1
(31.4)
(7.6)
(38.9)
(72.6)
(15.2)
(57.4)
0.5
(57.9)
(1.49)
(1.49)
38.8
38.8
See accompanying Notes to Consolidated Financial Statements.
F-4
Table of Contents
VAREX IMAGING CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
(In millions)
Net income (loss)
Other comprehensive income (loss), net of tax
Unrealized income on interest rate swap contracts
Unrealized gain (loss) on defined benefit obligations
Unrealized loss on forward contracts
Unrealized loss on available-for-sale securities
Foreign currency translation adjustments
Total comprehensive income (loss)
Less: Comprehensive income attributable to noncontrolling interests
2022
Fiscal Years
2021
2020
$
30.8 $
17.9 $
(57.4)
—
1.4
(0.6)
(0.1)
(0.6)
30.9
0.5
—
(0.1)
—
—
(0.7)
17.1
0.5
0.4
0.6
—
—
1.5
(54.9)
0.5
(55.4)
Comprehensive income (loss) attributable to Varex
$
30.4 $
16.6 $
See accompanying Notes to Consolidated Financial Statements.
F-5
Table of Contents
(In millions, except share amounts)
Assets
Current assets:
Cash and cash equivalents
VAREX IMAGING CORPORATION
CONSOLIDATED BALANCE SHEETS
September 30, 2022
October 1, 2021
Accounts receivable, net of allowance for credit losses of $0.6 million and $1.0 million at
September 30, 2022 and October 1, 2021, respectively
Inventories, net
Prepaid expenses and other current assets
Total current assets
Property, plant and equipment, net
Goodwill
Intangible assets, net
Investments in privately-held companies
Deferred tax assets
Operating lease assets
Other assets
Total assets
Liabilities and stockholders' equity
Current liabilities:
Accounts payable
Accrued liabilities and other current liabilities
Current operating lease liabilities
Current maturities of long-term debt
Deferred revenues
Total current liabilities
Long-term debt, net
Deferred tax liabilities
Operating lease liabilities
Other long-term liabilities
Total liabilities
Commitments and contingencies (Note 12)
Stockholders' equity:
$
89.4 $
173.3
303.2
44.0
609.9
141.3
284.5
33.6
46.4
2.3
23.2
43.2
144.6
155.3
224.8
29.5
554.2
140.2
292.2
50.7
49.3
4.0
24.3
32.6
$
$
1,184.4 $
1,147.5
78.2 $
81.4
4.0
2.1
7.4
173.1
412.3
0.5
18.0
33.8
637.7
58.8
89.7
6.2
2.8
9.1
166.6
431.7
2.2
18.7
31.8
651.0
Preferred stock, $0.01 par value: 20,000,000 shares authorized, none issued
—
—
Common stock, $0.01 par value: 150,000,000 shares authorized
Shares issued and outstanding: 40,085,126 and 39,435,830 at September 30, 2022 and
October 1, 2021, respectively
Additional paid-in capital
Accumulated other comprehensive income
Retained earnings
Total Varex stockholders' equity
Noncontrolling interests
Total stockholders' equity
0.4
469.1
0.1
63.8
533.4
13.3
546.7
0.4
449.4
—
33.5
483.3
13.2
496.5
Total liabilities and stockholders' equity
$
1,184.4 $
1,147.5
See accompanying Notes to Consolidated Financial Statements.
F-6
Table of Contents
VAREX IMAGING CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
Common Stock
Shares
Amount
Additional
Paid-in
Capital
Accumulated
Other
Comprehensive
Income (Loss)
Retained
Earnings
Total
Varex
Equity
Noncontrolling
Interests
Total
Stockholders'
Equity
38.4
$
0.4
$
371.8
$
(1.7) $
74.4
$
444.9
$
3.3
$
448.2
(In millions)
September 27, 2019
Cumulative effect of accounting change
Net loss
Exercise of stock options
Common stock issued upon vesting of restricted shares
Shares withheld on vesting of restricted stock
Common stock issued under employee stock purchase plan
Share-based compensation
—
Unrealized gain on interest rate swap contracts, net of tax
—
Unrealized gain on defined benefit obligations, net of tax
—
Conversion feature of Convertible Notes, net of issuance
costs
Purchase of hedges
Issuance of warrants
Foreign currency translation adjustments
Shares issued to settle deferred consideration
Reclassification from mezzanine equity to equity for
noncontrolling interest in MeVis Medical Solutions, AG
Other
October 2, 2020
Net income
Common stock issued upon vesting of restricted shares
Shares withheld on vesting of restricted stock
Common stock issued under employee stock purchase plan
Share-based compensation
Foreign currency translation adjustments
Other
October 1, 2021
Net income
Exercise of stock options
Common stock issued upon vesting of restricted shares
Shares withheld on vesting of restricted stock
Common stock issued under employee stock purchase plan
Share-based compensation
Unrealized loss on forward contracts
Unrealized loss on change in fair value of available-for-sale
securities
Unrealized loss on defined benefit obligations, net of tax
—
—
—
0.1
0.2
(0.1)
0.2
—
—
—
—
0.3
—
—
—
0.2
(0.1)
0.2
—
—
—
—
0.1
0.4
(0.1)
0.3
—
—
—
—
—
Unrealized gain on defined benefit obligations, net of tax
—
Foreign currency translation adjustments
Other
September 30, 2022
39.1
$
0.4
$
434.4
$
0.8
$
16.1
$
451.7
$
14.1
$
465.8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1.5
—
(1.8)
3.6
13.4
—
—
49.7
(61.0)
49.8
—
7.4
—
—
—
—
—
—
—
—
—
0.4
0.6
—
—
—
1.5
—
—
—
(0.3)
(0.3)
(57.9)
(57.9)
—
—
—
—
—
—
—
—
—
—
—
—
—
1.5
—
(1.8)
3.6
13.4
0.4
0.6
49.7
(61.0)
49.8
1.5
7.4
—
(0.1)
(0.1)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
11.3
(0.5)
(0.3)
(57.9)
1.5
—
(1.8)
3.6
13.4
0.4
0.6
49.7
(61.0)
49.8
1.5
7.4
11.3
(0.6)
—
—
—
—
—
—
—
—
—
—
(1.5)
2.8
13.9
—
—
(0.2)
—
—
—
—
—
(0.1)
(0.7)
—
17.4
—
—
—
—
—
—
—
17.4
—
(1.5)
2.8
13.9
(0.1)
(0.7)
(0.2)
0.5
—
—
—
—
—
—
(1.4)
17.9
—
(1.5)
2.8
13.9
(0.1)
(0.7)
(1.6)
—
—
—
—
—
—
—
—
—
—
—
—
3.8
—
(2.8)
4.9
14.0
—
—
—
—
(0.2)
—
—
—
—
—
—
(0.6)
(0.1)
1.4
(0.6)
—
30.3
30.3
—
—
—
—
—
—
—
—
—
—
3.8
—
(2.8)
4.9
14.0
(0.6)
(0.1)
1.4
(0.6)
(0.2)
0.5
—
—
—
—
—
—
—
—
—
(0.4)
30.8
3.8
—
(2.8)
4.9
14.0
(0.6)
(0.1)
1.4
(0.6)
(0.6)
39.4
$
0.4
$
449.4
$
—
$
33.5
$
483.3
$
13.2
$
496.5
40.1
$
0.4
$
469.1
$
0.1
$
63.8
$
533.4
$
13.3
$
546.7
See accompanying Notes to Consolidated Financial Statements.
F-7
Table of Contents
VAREX IMAGING CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In millions)
Cash flows from operating activities:
2022
Fiscal Years
2021
2020
Net income (loss)
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
$
30.8
$
17.9
$
(57.4)
Share-based compensation expense
Depreciation
Amortization of intangible assets
Deferred taxes
Loss from equity method investments
Amortization of deferred loan costs
Impairment of intangible assets
Other assets impairment charges
Inventory write-down
Loss on operating lease abandonment
Other, net
Changes in assets and liabilities:
Accounts receivable
Inventories
Prepaid expenses and other assets
Accounts payable
Accrued liabilities and other current and long-term liabilities
Deferred revenues
Net cash provided by operating activities
Cash flows from investing activities:
Purchases of property, plant and equipment
Loss on settlement of cash flow hedge
Proceeds from maturities of marketable debt securities
Purchase of marketable debt securities
Purchase of marketable equity securities
Purchase of certificates of deposit
Acquisitions of businesses, net of cash acquired
Proceeds from sales of business and assets
Investments in and loans to privately-held companies
Other
Net cash used in investing activities
Cash flows from financing activities:
Proceeds from issuance of debt
Repayments of borrowings
Payment of debt issuance costs
Proceeds from issuance of warrant
Purchases of hedges
Proceeds from shares issued under employee stock purchase plan
Proceeds from exercise of stock options
Taxes related to net share settlement of equity awards
Other financing activities
Net cash (used in) provided by financing activities
Effects of exchange rate changes on cash and cash equivalents and restricted cash
Net (decrease) increase in cash and cash equivalents and restricted cash
Cash and cash equivalents and restricted cash at beginning of period
Cash and cash equivalents and restricted cash at end of period
Supplemental cash flow information:
Cash paid for interest
Cash paid for income tax, net of refunds
Supplemental non-cash activities:
Purchases of property, plant and equipment financed through accounts payable
$
$
$
14.0
19.0
14.6
0.6
2.6
10.9
—
—
6.4
1.9
4.1
(18.1)
(85.0)
10.3
19.7
(14.9)
—
16.9
(21.3)
(0.5)
2.0
(18.7)
(2.4)
(7.2)
—
1.7
(0.6)
(1.4)
(48.4)
—
(29.4)
—
—
—
4.9
3.8
(2.8)
(0.3)
(23.8)
(0.2)
(55.5)
146.1
90.6
29.5
2.2
$
$
13.9
20.5
16.8
(3.0)
3.0
10.0
—
0.5
3.5
—
1.3
(32.9)
42.8
(0.9)
(13.6)
12.2
0.6
92.6
(15.1)
—
—
—
—
—
—
—
(1.4)
0.3
(16.2)
1.5
(33.1)
—
—
—
2.8
—
(1.5)
(2.0)
(32.3)
(0.1)
44.0
102.1
146.1
21.6
14.1
$
$
1.5
$
1.5
$
13.4
22.3
17.2
(3.1)
1.3
5.1
2.8
2.7
18.1
—
4.7
17.7
(42.7)
(9.3)
14.3
8.1
(2.0)
13.2
(23.5)
—
—
—
—
—
(1.6)
—
(1.8)
—
(26.9)
593.8
(483.9)
(16.7)
49.8
(61.0)
3.6
1.5
(1.8)
(1.7)
83.6
0.9
70.8
31.3
102.1
16.7
4.2
1.6
See accompanying Notes to Consolidated Financial Statements.
F-8
Table of Contents
VAREX IMAGING CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Description of Business
Varex Imaging Corporation (the “Company,” “Varex,” or “Varex Imaging”) designs, manufactures, sells and services a broad
range of medical products, which include X-ray components including tubes, digital detectors and accessories, high voltage
connectors, image processing software and workstations, computer-aided diagnostic software, collimators, automatic exposure control
devices, generators, ionization chambers and buckys, for use in a range of applications, including radiographic or fluoroscopic
imaging, mammography, computed tomography, oncology and computer-aided detection. The Company sells its products to imaging
system original equipment manufacturer (“OEM”) customers for incorporation into new medical diagnostic, radiation therapy, dental,
and veterinary equipment, as well as to independent service companies and distributors, and directly to end-users for replacement
purposes.
The Company also designs, manufactures, sells and services industrial products, which include Linatron® X-ray linear
accelerators, digital detectors, high voltage connectors, imaging processing software and image detection products for security and
inspection purposes, such as cargo screening at ports and borders and nondestructive examination in a variety of applications. The
Company generally sells security and inspection products to OEM customers who incorporate Varex’s products into their inspection
or irradiation systems and processes. The Company conducts an active research and development program to focus on new technology
and applications in both the medical and industrial X-ray imaging markets.
Basis of Presentation
The accompanying consolidated financial statements have been prepared by the Company pursuant to the rules and
regulations of the SEC and in accordance with accounting principles generally accepted in the United States ("GAAP"). The Company
has consolidated all the majority owned subsidiaries and entities over which we have control. All intercompany balances and
transactions have been eliminated in consolidation.
Segment Reporting
The Company has two reportable operating segments; (i) Medical and (ii) Industrial. See Note 16, Segment Information,
included in this report, for further information on the Company’s segments.
Fiscal Year
The fiscal years of the Company as reported are the 52 or 53-week period ending on the Friday nearest September 30. Fiscal
year 2022 was the 52-week period that ended September 30, 2022, fiscal year 2021 was the 52-week period that ended October 1,
2021, and fiscal year 2020 was the 53-week period that ended October 2, 2020.
Variable Interest Entities
For entities in which the Company has variable interests, the Company focuses on identifying which entity has the power to
direct the activities that most significantly impact the variable interest entity’s economic performance and which entity has the
obligation to absorb losses or the right to receive residual returns from the variable interest entity. If the Company is the primary
beneficiary of a variable interest entity, the assets, liabilities and results of operations of the variable interest entity will be included in
the Company’s consolidated financial statements. As of September 30, 2022, the Company had variable interests in two entities,
neither of which were consolidated by the Company.
Use of Estimates
The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions
that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the
consolidated financial statements and the reported amounts of revenues and expenses during the reporting periods. Such estimates
include the valuation of inventories, valuation of goodwill and intangible assets, warranties, contract liabilities, long-lived asset
valuations, impairment of investments, valuation of financial instruments, and taxes on income. Actual results could differ from these
estimates.
F-9
Table of Contents
Impact of COVID-19
The coronavirus (“COVID-19”) pandemic, the emerging variants, uneven vaccination rates across the globe, and the
mitigation efforts by governments to control its spread have created uncertainties and disruptions in the economic and financial
markets. The extent to which COVID-19 will continue to impact the Company’s business and financial results depends on numerous
evolving factors including: the magnitude and duration of COVID-19, the extent to which it will continue to impact worldwide
macroeconomic conditions, including supply chain disruptions, interest rates, unemployment rates, the speed of the economic
recovery, and governmental and business reactions to the pandemic. The Company has experienced continuing supply chain
disruptions and other issues that are at least partially related to the ongoing COVID-19 pandemic. In addition, while we have from
time to time taken significant precautions to maintain employee safety, such as implementing mask requirements, encouraging
vaccination, and periodically asking non-production related employees to work from home when possible, the Company has
experienced, and may in the future experience, COVID-19 related employee absences that adversely impact our production or
business.
The Company assessed certain accounting matters that generally require consideration of forecasted financial information in
context with the information reasonably available to the Company, including the estimated future impacts of COVID-19, through the
date of filing this report. The accounting matters assessed included, but were not limited to, the Company’s carrying value of goodwill,
intangibles, long-lived assets, equity method investments, inventory and related reserves, and the allowance for credit losses. The
Company’s assessment of the magnitude and duration of COVID-19, as well as other factors, could result in material negative impacts
to the Company’s consolidated financial statements in future reporting periods. These future developments are highly uncertain and
the outcomes cannot be estimated with certainty. Actual results may differ from those estimates, and such differences may be material
to the financial statements.
Cash and Cash Equivalents
The Company considers currency on hand, demand deposits, time deposits and all highly-liquid investments with an original
maturity of three months or less at the date of purchase to be cash and cash equivalents.
Restricted Cash
Restricted cash primarily consists of cash collateral related to certain leases and inventory arrangements. Restricted cash is
included in other assets on the Company's Consolidated Balance Sheets. Cash and cash equivalents and restricted cash as reported
within the Consolidated Statements of Cash Flows consisted of the following:
(In millions)
Cash and cash equivalents
Restricted cash
Cash and cash equivalents and restricted cash as reported per statement of
cash flows
Fair Value
Twelve Months Ended
September 30, 2022
Twelve Months Ended
October 1, 2021
Beginning of
Period
End of Period
Beginning of
Period
End of Period
$
$
144.6 $
89.4
$
100.6 $
1.5
1.2
1.5
144.6
1.5
146.1 $
90.6
$
102.1 $
146.1
Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in
the principal or most advantageous market for the asset or liability in an orderly transaction between market participants at the
measurement date. There is a three-level fair value hierarchy that prioritizes the inputs used to measure fair value. This hierarchy
requires entities to maximize the use of observable inputs and minimize the use of unobservable inputs. The three levels of inputs used
to measure fair value are as follows:
Level 1—Quoted prices in active markets for identical assets or liabilities.
Level 2—Observable inputs other than quoted prices included in Level 1, such as quoted prices for similar assets and
liabilities in active markets; quoted prices for identical or similar assets and liabilities in markets that are not active;
or, other inputs that are observable or can be corroborated by observable market data.
Level 3—Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the
assets or liabilities.
F-10
Table of Contents
Derivative Instruments and Hedging Activities
The Company records all derivatives on the Consolidated Balance Sheets at fair value as of the reporting date. For derivative
instruments that are designated and qualify as cash flow hedges, the gain or loss on the derivative is reported as a component of other
comprehensive income or loss and reclassified from accumulated other comprehensive income ("OCI") into earnings when the hedged
transaction affects earnings. For derivatives that are designated and qualify as net investment hedges, the gain or loss on the derivative
is reported as a component of other comprehensive income or loss until the hedged item is sold. The portion of the change in fair value
of the Company's net investment hedges (or cross currency swaps) related to the cross-currency basis spread is an excluded component
in the assessment of the effectiveness of these net investment hedges (or cross currency swaps). A qualitative assessment of hedge
effectiveness is performed on a quarterly basis, unless facts and circumstances indicate the hedge may no longer be highly effective, in
which case, a quantitative assessment of hedge effectiveness is performed.
Concentration of Risk
Financial instruments that potentially expose the Company to concentrations of credit risk consist principally of cash, cash
equivalents, marketable securities, and trade accounts receivable. Cash held with financial institutions may exceed the Federal Deposit
Insurance Corporation insurance limits or similar limits in foreign jurisdictions. To date, the Company has not experienced any losses
on its deposits of cash and cash equivalents. The Company performs ongoing credit evaluations of its customers and, except for
government tenders, group purchases and orders with a letter of credit, its industrial customers often provide a down payment. The
Company maintains an allowance for credit losses based upon the expected collectability of all accounts receivable. The Company
obtains some of the components in its products from a limited group of suppliers or from a single-source supplier. When these
suppliers are unable to meet the Company's supply needs, the Company's production is negatively impacted.
Credit is extended to customers based on an evaluation of the customer’s financial condition, and collateral is not required. In
certain circumstances, a customer may be required to prepay all or a portion of the contract price prior to transfer of control. During
the periods presented, one of the Company's customers accounted for a significant portion of revenues, as set forth below:
Canon Medical Systems Corporation
2022
Fiscal Year
2021
2020
17.2 %
17.9 %
20.5 %
Canon Medical Systems Corporation accounted for 10.3% and 16.2% of the Company’s accounts receivable as of
September 30, 2022 and October 1, 2021, respectively.
Inventories, net
Inventory is valued at the lower of cost or net realizable value. Costs include materials, labor, external service and
manufacturing overhead and is computed on a first-in-first-out basis. The Company evaluates the carrying value of its inventories
taking into consideration such factors as historical and anticipated future sales compared to quantities on hand and the prices the
Company expects to obtain for products in its various markets. The Company adjusts excess and obsolete inventories to net realizable
value and write-downs of excess and obsolete inventories are recorded as a component of cost of revenues.
The following table summarizes the Company’s inventories, net:
(In millions)
Raw materials and parts
Work-in-process
Finished goods
Total inventories
September 30, 2022
October 1, 2021
$
$
240.3 $
23.2
39.7
303.2 $
168.0
20.4
36.4
224.8
The Company recorded inventory write-downs of $6.4 million, $3.5 million and $18.1 million for the twelve months ended
September 30, 2022, October 1, 2021 and October 2, 2020, respectively, of which $0.0 million, $3.5 million, and $15.8 million were
from certain discontinued products in relation to COVID-19.
F-11
Table of Contents
Property, Plant and Equipment, net
Property, plant and equipment are stated at cost, net of accumulated depreciation. Major improvements are capitalized, while
repairs and maintenance are expensed as incurred. Depreciation is computed using the straight-line method over the estimated useful
lives of the assets or remaining lease term. Land is not subject to depreciation, but land improvements are depreciated over fifteen
years. Land leasehold rights and leasehold improvements are depreciated over the lesser of their estimated useful lives or remaining
lease terms. Buildings are depreciated up to thirty years. Machinery and equipment are depreciated over a range from three to seven
years. Assets subject to lease are depreciated over the lesser of their estimated useful lives or remaining lease terms. Estimated useful
lives are periodically reviewed and, when appropriate, changes are made prospectively. When certain events or changes in operating
conditions occur, asset lives may be adjusted, and an impairment assessment may be performed on the recoverability of the carrying
amounts. When assets are retired or otherwise disposed of, the assets and related accumulated depreciation are removed from the
accounts.
The following table summarizes the Company’s property, plant and equipment, net:
(In millions)
Land
Buildings and leasehold improvements
Machinery and equipment
Construction in progress
Gross property, plant and equipment
Accumulated depreciation and amortization
Total property, plant and equipment, net
September 30, 2022
October 1, 2021
$
8.3 $
149.2
182.9
29.1
369.5
(228.2)
141.3 $
$
8.3
148.7
179.7
18.1
354.8
(214.6)
140.2
The Company recorded depreciation expense of $19.0 million, $20.5 million and $22.3 million in fiscal years 2022, 2021 and
2020, respectively. During fiscal years 2022, 2021 and 2020, the Company recorded accelerated depreciation of $0.0 million,
$0.2 million and $2.9 million, respectively, which primarily related to the machinery and equipment used at the Santa Clara, California
facility. See Note 5, Restructuring, included in this report, for further information.
Investments
The Company accounts for its equity investments in privately-held companies under the equity method of accounting if the
Company has the ability to exercise significant influence in these investments. Distributions received from an equity method
investment are classified using the cumulative earnings approach, which means that distributions up to the amount of cumulative
equity in earnings recognized will be treated as returns on investment and classified as operating cash flows and those in excess of that
amount will be treated as returns of investment and classified as investing cash flows. The Company reviews its equity investments in
privately-held companies for impairment whenever events or changes in business circumstances are other than temporary and indicate
that the carrying amount of the investments may not be fully recoverable. There were no impairments recorded during fiscal years
2022 and 2021. During the fiscal year 2020, the Company wrote off a $2.7 million cost investment in a privately-held company, the
related expense is included as part of other expense, net in the Company's consolidated financial statements.
Marketable Securities
The Company's marketable securities consist primarily of financial instruments such as U.S. treasury securities, U.S. agency
obligations, corporate bonds, commercial paper, money market funds, and equity securities. The Company classifies marketable debt
securities as available-for-sale at the time of purchase and reevaluates such classifications as of each balance sheet date. All
marketable debt securities are recorded at estimated fair value. Any unrealized gains or losses for marketable debt securities are
included in accumulated other comprehensive income within the Consolidated Balance Sheets. Marketable equity securities are stated
at fair value as determined by the most recently traded price of each security at the balance sheet date. All unrealized gains and losses
on equity securities are recorded as part of other expense, net in the Company's consolidated financial statements. See Note 10, Fair
Value, for further details.
When the fair value of a debt security declines below its amortized cost basis, any portion of that decline attributable to credit
losses, to the extent expected to be nonrecoverable before the sale of the security, is recognized in our Consolidated Statements of
Operations. When the fair value of a debt security declines below its amortized cost basis due to changes in interest rates, such
amounts are recorded in accumulated other comprehensive income, and are recognized in our Consolidated Statements of Operations
only if we sell or intend to sell the security before recovery of its cost basis. There were no credit losses related to marketable debt
securities recorded during the twelve months ended September 30, 2022.
F-12
Table of Contents
Goodwill and Intangible Assets
Goodwill is recorded when the purchase price of an acquisition exceeds the fair value of the net identified tangible and
intangible assets acquired. Purchased intangible assets are carried at cost, net of accumulated amortization, and are included in
intangible assets, net in the Company's Consolidated Balance Sheets. Intangible assets with finite lives are amortized over their
estimated useful lives of primarily two to seven years using the straight-line method.
Impairment of Long-lived Assets, Intangible Assets and Goodwill
The Company reviews long-lived assets and identifiable intangible assets with finite lives for impairment whenever events or
changes in circumstances indicate that the carrying amount of these assets may not be recoverable. The Company assesses these assets
for impairment based on their estimated undiscounted future cash flows. If the carrying value of the assets exceeds the estimated
future undiscounted cash flows, the Company recognizes an impairment loss based on the excess of the carrying amount over the fair
value of the assets.
The Company evaluates goodwill and indefinite lived intangible assets for impairment at least annually at the beginning of
the fourth quarter of each fiscal year or whenever an event occurs or circumstances change that would more likely than not reduce the
fair value of a reporting unit below its carrying amount. The evaluation includes consideration of qualitative factors including industry
and market considerations, overall financial performance, and other relevant events and factors affecting the reporting unit. If the
Company determines that a quantitative analysis is necessary, the Company performs a step one analysis, which consists of a
comparison of the fair value of a reporting unit against its carrying amount, including the goodwill allocated to each reporting unit.
The Company determines the fair value of its reporting units based on a combination of income and market approaches. The income
approach is based on the present value of estimated future cash flows of the reporting units, and the market approach is based on a
market multiple calculated for each reporting unit based on market data of other companies engaged in similar business. If the carrying
amount of the reporting unit is in excess of its fair value, the difference between the fair value and carrying amount is recorded as an
impairment loss. The impairment test for intangible assets with indefinite useful lives, if any, consists of a comparison of fair value to
carrying value, with any excess of carrying value over fair value being recorded as an impairment loss. In fiscal years 2022, 2021 and
2020, the Company performed the annual goodwill impairment test for our two reporting units and found no impairment.
During the fiscal years ended September 30, 2022, October 1, 2021 and October 2, 2020, the Company recognized $0.0
million, $0.0 million, and $2.8 million of impairments of intangible assets, respectively.
Loss Contingencies
From time to time, the Company is involved in legal proceedings, claims and government inspections or investigations,
customs and duties audits, other contingency matters, both inside and outside the United States, arising in the ordinary course of its
business or otherwise. The Company accrues amounts for probable losses, to the extent they can be reasonably estimated, that it
believes are adequate to address any liabilities related to legal proceedings and other loss contingencies that the Company believes will
result in a probable loss (including, among other things, probable settlement value). A loss or a range of loss is disclosed when it is
reasonably possible that a material loss will be incurred and can be estimated or when it is reasonably possible that the amount of a
loss, when material, will exceed the recorded provision. When a loss contingency is probable but not reasonably estimable the nature
of the contingency and the fact that an estimate cannot be made is disclosed. See Note 12, Commitments and Contingencies, for further
information regarding certain of our contractual obligations and contingencies.
Product Warranty
The Company warrants most of its products for a specific period of time, usually 12 to 24 months from delivery or
acceptance, against material defects. The Company provides for the estimated future costs of warranty obligations in cost of revenues
when the related revenues are recognized. The accrued warranty costs represent the best estimate at the time of sale of the total costs
that the Company will incur to repair or replace product parts that fail while still under warranty.
The amount of the accrued estimated warranty costs obligation for established products is primarily based on historical
experience as to product failures adjusted for current information on repair costs. For new products, estimates include the historical
experience of similar products, as well as a reasonable allowance for warranty expenses associated with new products. On a quarterly
basis, the Company reviews the accrued warranty costs and updates the historical warranty cost trends, if required.
F-13
Table of Contents
The following table reflects the changes in the Company’s accrued product warranty:
(In millions)
Accrued product warranty, at beginning of period
New accruals charged to cost of revenues
Product warranty expenditures
Accrued product warranty, at end of period
Leases
Fiscal Years Ended
September 30,
2022
October 1, 2021
$
$
8.5 $
11.3
(11.9)
7.9 $
8.1
13.0
(12.6)
8.5
The Company determines if an arrangement is or contains a lease at the inception of an arrangement. The Company's
operating lease right-of-use ("ROU") assets represent the right to use an underlying asset over the lease term and lease liabilities
represent its obligation to make lease payments arising from the lease. ROU assets may also include initial direct costs incurred and
prepaid lease payments, less lease incentives. Lease liabilities and their corresponding ROU assets are recognized based on the present
value of lease payments over the lease term, discounted using the Company's incremental borrowing rate. The Company recognizes
operating leases with lease terms of more than twelve months in operating lease assets, current operating lease liabilities, and
operating lease liabilities on its Consolidated Balance Sheets. The Company recognizes finance leases with lease terms of more than
twelve months in property, plant and equipment, net, accrued liabilities and other current liabilities, and other long-term liabilities on
its Consolidated Balance Sheets. For purposes of calculating lease liabilities and the corresponding ROU assets, the Company's lease
term may include options to extend or terminate the lease when it is reasonably certain that it will exercise that option.
Revenue Recognition
The Company’s revenues are derived primarily from the sale of hardware and services. The Company recognizes its revenues
net of any value-added or sales tax and net of sales discounts.
The Company sells a high proportion of its X-ray products to a limited number of OEM customers. X-ray tubes, digital
detectors and image-processing tools and security and inspection products are generally sold on a stand-alone basis. However, the
Company occasionally sells its digital detectors, X-ray tubes and imaging processing tools as a package that is optimized for digital X-
ray imaging and sells its Linatron ® X-ray accelerators together with its imaging processing software and image detection products to
OEM customers that incorporate them into their inspection systems. Service contracts are often sold with certain security and
inspection products and computer-aided detection products.
The Company determines revenue recognition through the following steps:
•
•
•
•
•
Identification of the contract, or contracts, with a customer
Identification of the performance obligations in the contract
Determination of the transaction price
Allocation of the transaction price to the performance obligations in the contract
Recognition of revenue when, or as, a performance obligation is satisfied
Transaction Price and Allocation to Performance Obligations
Transaction prices of products or services are typically based on contracted rates. To the extent that the transaction price
includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction
price utilizing the expected value method when there is a large number of transactions with similar characteristics or the most likely
amount method when there are two possible outcomes, depending on the circumstances of the transaction, to which the Company
expects to be entitled. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a
significant future reversal of cumulative revenue under the contract will not occur. Estimates of variable consideration and
determination of whether to include estimated amounts in the transaction price are based largely on an assessment of the Company’s
anticipated performance and all information (historical, current and forecasted) that is reasonably available.
The Company allows customers to return specific parts of purchased X-ray tubes for a partial refund credit, which is
identified as variable consideration. For sales with a right of return, revenue is reduced for expected returns, a liability is recorded for
expected returns, and an asset is recorded for the right to recover products from customers on settling the liability. The Company
recognizes a reduction to revenue and cost of sales at the time of sale and a corresponding contract liability and contract asset. The
Company records this estimate based on the historical volume of product returns and adjusts the estimate on a quarterly basis based on
the current quarter sales and current quarter returns.
F-14
Table of Contents
If a contract contains a single performance obligation, the entire transaction price is allocated to the single performance
obligation. Contracts that contain multiple performance obligations require an allocation of the transaction price based on the
estimated relative standalone selling prices of the promised products or services underlying each performance obligation. The
Company determines standalone selling prices based on the price at which the performance obligation is sold separately.
Contracts and Performance Obligations
The Company accounts for a contract with a customer when there is an approval and commitment from both parties, the
rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of the
consideration is probable. The Company's performance obligations consist mainly of transferring control of products and services
identified in the contracts or purchase orders. For each contract, the Company considers the obligation to transfer products and
services to the customer, which are distinct, to be performance obligations.
Recognition of Revenue
Revenue is recognized when, or as, obligations under the terms of a contract are satisfied, which occurs when control of the
promised products or services is transferred to customers. Revenue is measured as the amount of consideration the Company expects
to receive in exchange for transferring products or services to a customer.
Product revenue is generally recognized when the customer obtains control of the Company’s product, which occurs at a
point in time, and may be upon shipment or upon delivery based on the contractual shipping terms of a contract.
Service revenue is generally recognized over the term of the service contract. Services are expected to be transferred to the
customer throughout the term of the contract and the Company believes recognizing revenue ratably over the term of the contract best
depicts the transfer of value to the customer.
Disaggregation of Revenue
Revenue is disaggregated from contracts between geography and by reportable operating segment, which the Company
believes best depicts how the nature, amount, timing, and uncertainty of revenues and cash flows are affected by economic factors.
Refer to Note 16, Segment Information, included in this report, for the disaggregation of the Company’s revenue based on reportable
operating segments and disaggregated by geographic region.
Contract Balances
Contract assets are included within the prepaid expenses and other current assets, and other assets balances in the
Consolidated Balance Sheets. Contract liabilities, which also includes refund obligations, are included within the accrued liabilities
and other current liabilities, deferred revenues, and other long-term liabilities balances in the Consolidated Balance Sheets.
Costs to Obtain or Fulfill a Customer Contract
The Company has certain costs to obtain and fulfill a customer contract, such as commissions and shipping costs. The
Company recognizes the incremental costs of obtaining contracts as an expense when incurred if the amortization period of the assets
that the Company otherwise would have recognized is one year or less. Incremental costs of obtaining contracts that would be
recognized over greater than one year are not material. The Company accounts for shipping and handling activities related to contracts
with customers as costs to fulfill the promise to transfer the associated products. These costs are included as a component of cost of
revenues.
Deferred Revenues
Deferred revenue primarily represents (i) the amount received applicable to non-software products for which parts and
services under the warranty contracts have not been delivered, and (ii) the amount received for service contracts for which the services
have not been rendered.
Allowance for Credit Losses
The Company evaluates the creditworthiness of customers prior to authorizing shipment for all major sale transactions. On a
quarterly basis, the Company considers historical trends, current information and any reasonable and supportable forecasts to
determine if an amount should be included in the allowance for credit losses. The Company had an allowance for credit losses of $0.6
million and $1.0 million as of September 30, 2022 and October 1, 2021, respectively.
F-15
Table of Contents
Share-Based Compensation Expense
The Company has an equity-based incentive plan that provides for the grant of nonqualified stock options and restricted stock
units to directors, officers and other employees. The Company also permits employees to purchase shares under the Varex employee
stock purchase plan.
The Company values stock options granted and the option component of the shares of common stock purchased under the
equity-based incentive plans and stock purchased under the employee stock purchase plan using the Black-Scholes option-pricing
model. Share-based compensation expense for restricted stock units is measured using the fair value of the Company’s stock on the
date of grant and is amortized over the award’s respective service period. The Black-Scholes option-pricing model requires the input
of certain assumptions, and changes in the assumptions can materially affect the fair value estimates of share-based payment awards.
The Company measures and recognizes expense for all share-based payment awards based on their fair values. Share-based
compensation expense recognized in the Consolidated Statements of Operations includes compensation expense for the share-based
payment awards based on the grant date fair value estimated in accordance with the guidance on share-based compensation. The
Company records forfeitures as they occur. The Company attributes the value of share-based compensation to expense using the
straight-line method. The Company considers only the direct tax impacts of share-based compensation awards when calculating the
amount of tax windfalls or shortfalls. For additional information, see Note 14, Employee Stock Plans, included in this report.
Software Development Costs
Costs for the development of new software products and substantial enhancements to existing software products are expensed
as incurred until technological feasibility has been established, at which time any additional costs would be capitalized. No costs
associated with the development of software have been capitalized as the Company believes its current software development process
is essentially completed concurrent with the establishment of technological feasibility.
Research and Development
Research and development costs are expensed as incurred. These costs primarily include employees’ compensation,
consulting fees and material costs.
Taxes on Income
Current income tax expense or benefit is the amount of income taxes expected to be payable or receivable for the current
year. Deferred income tax liabilities or assets are established for the expected future tax consequences resulting from the differences in
financial reporting and tax bases of assets and liabilities. Future changes in tax regulation can have a material impact, including tax
rate changes or the realization of deferred tax assets. A valuation allowance is provided if it is more likely than not that some or all of
the deferred tax assets will not be realized. U.S. tax reform introduced a limitation of business interest deduction under IRC Section
163(j), which may be difficult to utilize without significant taxable income. Also, net operating loss carryforwards in jurisdictions with
current losses provide uncertainty for realization. In addition, we provide reserves for uncertain tax positions when such tax positions
do not meet the recognition thresholds or measurement standards prescribed by the authoritative guidance for accounting for income
taxes. A portion of the U.S. general business tax credits for research outside of the financial statement line for research and
development ("R&D") have a small degree of uncertainty. A reasonable reserve is maintained on the uncertain portion until either the
Internal Revenue Service chooses to audit or the statute of limitation expires. A reserve for R&D is typical for companies that
calculate and utilize this general business credit. Amounts for uncertain tax positions are adjusted in periods when new information
becomes available or when positions are effectively settled. Interest and penalties related to uncertain tax positions are recognized as a
component of income tax expense.
During fiscal year 2022, the Company received cash tax refunds related to net operating loss ("NOL") carryback claims for
U.S. losses incurred in fiscal year 2020. On August 16, 2022, the Inflation Reduction Act was enacted in response to rising inflation.
The Company does not meet the financial statement thresholds for the minimum tax applicability and does not anticipate other
provisions will have a material impact. The 2017 Tax Cuts and Jobs Act ("TCJA") included a provision requiring research and
development expenditures to be capitalized for tax years beginning after December 31, 2021, which will be effective for the Company
starting in fiscal year 2023. Because the Company has a significant amount of research and development expenditures, it expects
increased cash taxes in the early years following the effective date of TCJA.
F-16
Table of Contents
Foreign Currency Translation
The Company uses the U.S. Dollar predominately as the functional currency of its foreign operations. Gains and losses from
remeasurement of foreign currency balances into U.S. Dollars are included in the Consolidated Statements of Operations in other
expense, net. For the foreign subsidiaries where the local currency is the functional currency, translation adjustments of foreign
currency financial statements into U.S. Dollars are recorded to a separate component of accumulated other comprehensive income.
Recently Adopted Accounting Pronouncements
In December 2019, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU")
2019-12, Simplifying the Accounting for Income Taxes, which simplifies the accounting for income taxes by removing certain
exceptions to the current guidance, and improving the consistent application and simplification of other areas of the guidance. The
Company adopted this ASU on October 2, 2021, using a prospective approach. The adoption of ASU 2019-12 did not have a material
impact on the Company's consolidated financial statements and related disclosures.
In June 2016, the FASB issued ASU 2016-13, Measurement of Credit Losses on Financial Instruments. This pronouncement
changes the impairment model for most financial assets and certain other instruments, including trade and other receivables, held-to-
maturity debt securities and loans and replaces the incurred loss methodology with a new, forward-looking “expected loss” model that
considers the risk of loss over the asset’s contractual life, even if remote, historical experience, current conditions, and reasonable and
supportable forecasts of future relevant events. The Company adopted this ASU on October 3, 2020, using a modified retrospective
approach. The adoption of ASU 2016-13 did not have a material impact on the Company's consolidated financial statements and
related disclosures.
Recent Accounting Standards Updates Not Yet Effective
In August 2020, the FASB issued ASU 2020-06, Accounting for Convertible Instruments and Contracts in an Entity’s Own
Equity. The standard removes certain separation models in ASC 470-20 for convertible instruments, and, as a result, embedded
conversion features are no longer separated from the host contract for convertible instruments with conversion features that are not
required to be accounted for as derivatives under ASC 815. These convertible debt instruments will be accounted for as a single
liability measured at amortized cost. This will also result in the interest expense recognized for convertible debt instruments to be
typically closer to the coupon interest rate. Further, the ASU made amendments to the earnings per share (“EPS”) guidance in Topic
260 for convertible instruments, the most significant impact of which is requiring the use of the if-converted method for diluted EPS
calculation, and no longer allowing the net share settlement method. The ASU is effective for annual periods beginning after
December 15, 2021, including interim periods within those years. Adoption of the ASU can either be on a modified retrospective or
full retrospective basis. The Company will adopt the new standard effective October 1, 2022, the first day of the fiscal year ending
September 29, 2023, using the modified retrospective method. On the date of adoption, the Company estimates that its entry to adopt
this ASU will be to record a reduction in additional paid-in capital of $34.6 million, an increase to long-term debt, net of
$28.0 million, an increase to deferred tax assets of $6.7 million, and an increase to retained earnings of $13.3 million in 2023 for the
after-tax impact of previously recognized amortization of the debt discount associated with the Company’s Convertible Senior Notes.
The unamortized discount on our Convertible Notes (see Note 9, Borrowings) will be reclassified from equity to liabilities and the
interest expense from our Convertible Notes will decrease and be closer to the coupon rate of 4.00%. The impact that adoption of ASU
2020-06 will have on our net income per diluted share will depend on the amount of earnings in each period and our share price, and
could result in additional dilution.
In March 2020, the FASB issued ASU 2020-04, Facilitation of the Effects of Reference Rate Reform on Financial Reporting,
to provide optional guidance for a limited period of time to ease the potential burden in accounting for (or recognizing the effects of)
reference rate (e.g., LIBOR) reform on financial reporting. Adoption of the guidance is elective and is permitted from March 12, 2020
through December 31, 2022. The Company will evaluate transactions or contract modifications occurring as a result of reference rate
reform and determine whether to apply the optional guidance on an ongoing basis. The Company determined this ASU will not have a
material impact on its financial position, results of operations or cash flows.
F-17
Table of Contents
2. REVENUE RECOGNITION
The following tables summarize the changes in the contract assets and refund liabilities for the twelve months ended
September 30, 2022 and October 1, 2021:
(In millions)
Balance at October 2, 2020
Costs recovered from product returns during the period
Contract asset from shipments of products, subject to return during the period
Adjustment for actual vs. reserved product returns
Balance at October 1, 2021
Costs recovered from product returns during the period
Contract asset from shipments of products, subject to return during the period
Adjustment for actual vs. reserved product returns
Balance at September 30, 2022
(In millions)
Balance at October 2, 2020
Release of refund liability included in beginning of year refund liability
Additions to refund liabilities
Adjustment for actual vs. reserved product returns
Balance at October 1, 2021
Release of refund liability included in beginning of year refund liability
Additions to refund liabilities
Adjustment for actual vs. reserved product returns
Balance at September 30, 2022
Contract Assets
24.6
(4.8)
6.4
(1.9)
24.3
(5.4)
7.1
(0.6)
25.4
Refund Liabilities
27.4
(5.3)
7.1
(2.2)
27.0
(6.1)
7.9
(0.6)
28.2
$
$
$
$
$
$
During fiscal year 2022, the Company recognized revenue of $6.7 million related to deferred revenue which existed at
October 1, 2021. During fiscal year 2021, the Company recognized revenue of $6.9 million related to deferred revenue which existed
at October 2, 2020.
Remaining Performance Obligations
Remaining performance obligations represent the transaction price of firm orders for which revenue has not yet been
recognized, which are primarily related to contracts where control will be transferred to customers over the next 12 months. See Note
1, Summary of Significant Accounting Policies, for details on the nature of the remaining performance obligations within these
contracts and how they will be resolved.
3. LEASES
On September 28, 2019, the Company adopted ASC 842, which amended the guidance for the accounting and reporting of
leases. The determination of whether an arrangement is, or contains, a lease is performed at the inception of the arrangement. The
Company has operating and finance leases for office space, warehouse and manufacturing space, vehicles, and certain equipment. The
Company's lease agreements do not contain any material residual value guarantees, variable lease costs, bargain purchase options or
restrictive covenants. The Company does not have any lease transactions with related parties. Leases with an initial term of 12 months
or less are generally not recorded on the balance sheet and expense for these leases is recognized on a straight-line basis over the lease
term. The Company's leases have remaining lease terms of less than one year to approximately ten years, some of which may include
options to extend the leases for up to five years and some include options to terminate early. These options have been included in the
determination of the lease liability when it is reasonably certain that the option will be exercised.
Right-of-use assets represent the Company's right to use an underlying asset for the lease term, and lease liabilities represent
the Company's obligation to make lease payments arising from the lease contract. Operating lease liabilities and their corresponding
right-of-use assets are recorded based on the present value of fixed lease payments over the expected lease term. The interest rate
implicit in lease contracts is typically not readily determinable. As such, the Company's incremental borrowing rate is based on a
credit-adjusted risk-free rate, which best approximates a secured rate over a similar term of lease.
F-18
Table of Contents
During the twelve months ended September 30, 2022, the Company recorded a loss due to abandonment of $1.9 million,
which is included in selling, general and administrative on the Consolidated Statements of Operations.
The following table presents supplemental balance sheet information related to the Company's operating and finance leases:
(In millions)
Assets
Balance Sheet Location
September 30, 2022
October 1, 2021
Operating lease right-of-use assets
Operating lease assets
$
23.2 $
Finance lease right-of-use assets
Property, plant and equipment, net
Liabilities
Operating lease liabilities (current)
Current operating lease liabilities
Finance lease liabilities (current)
Accrued liabilities and other current
liabilities
Operating lease liabilities (non-current)
Operating lease liabilities
0.3
4.0
0.2
18.0
Finance lease liabilities (non-current)
Other long-term liabilities
$
0.1 $
The following table presents the weighted average remaining lease term and discount rate information related to the
Company's operating and finance leases:
24.3
0.5
6.2
0.2
18.7
0.3
September 30, 2022
October 1, 2021
Operating lease weighted average remaining lease term (in years)
Operating lease weighted average discount rate
Finance lease weighted average remaining lease term (in years)
Finance lease weighted average discount rate
6.4
5.6 %
2.0
3.6 %
The following table provides information related to the Company’s operating and finance leases:
(In millions)
Total operating lease costs(1)
Total finance lease costs
Operating cash flows from operating leases
Financing cash flows from finance leases
$
$
$
Total cash paid for amounts included in the measurement of lease
liabilities
$
Noncash operating right-of-use assets obtained in exchange for new
lease liabilities
Noncash finance right-of-use assets obtained in exchange for new lease
liabilities
Total right-of-use assets obtained in exchange for new lease
liabilities
$
$
2022
2021
2020
6.4 $
0.2 $
7.3 $
0.2
7.5 $
5.4 $
0.1
5.5 $
8.1 $
0.3 $
7.9 $
0.2
8.1 $
5.6 $
0.2
5.8 $
(1) Includes variable and short-term lease expense, which were immaterial for fiscal years 2022, 2021, and 2020.
5.9
5.5 %
2.5
3.6 %
8.4
0.3
8.0
0.3
8.3
10.6
0.2
10.8
F-19
Table of Contents
As of September 30, 2022, maturities of operating lease and finance lease liabilities for each of the following five years and a
total thereafter were as follows:
(In millions)
Fiscal years:
2023
2024
2025
2026
2027
Thereafter
Total future lease payments
Less: imputed interest
Present value of lease liabilities
Operating Leases
Finance Leases
$
$
$
5.2 $
4.6
4.4
3.1
2.8
6.5
26.6 $
(4.6)
22.0 $
0.2
0.1
—
—
—
—
0.3
—
0.3
As of September 30, 2022, the Company had not entered into any material leases that have not yet commenced.
4. RELATED-PARTY TRANSACTIONS
Investment in Privately-Held Companies
The Company has a 40% ownership interest in dpiX Holding LLC (“dpiX Holding”), a holding company that has a 100%
ownership interest in dpiX LLC (“dpiX”), a supplier of amorphous silicon-based thin film transistor arrays for digital flat panel image
detectors. In accordance with the dpiX Holding operating agreement, net profits or losses are allocated to the members in accordance
with their ownership interests.
The investment in dpiX Holding is accounted for under the equity method of accounting. When the Company recognizes its
share of net profits or losses of dpiX Holding, profits or losses in inventory purchased from dpiX are eliminated. In fiscal years 2022,
2021 and 2020, the Company recorded a loss on the equity investment in dpiX Holding of $2.6 million, $2.3 million and $0.8 million,
respectively. Loss on the equity investment in dpiX Holding is included in other expense, net in the Consolidated Statements of
Operations. The carrying value of the equity investment in dpiX Holding was $42.4 million and $45.0 million at September 30, 2022
and October 1, 2021, respectively.
In fiscal years 2022, 2021 and 2020, the Company purchased glass transistor arrays from dpiX totaling $21.0 million,
$18.5 million and $20.4 million, respectively. These purchases of glass transistor arrays are included as a component of inventories,
net on the Consolidated Balance Sheets or cost of revenues in the Consolidated Statements of Operations.
As of September 30, 2022 and October 1, 2021, the Company had accounts payable to dpiX totaling $3.1 million and $2.8
million, respectively.
The Company has the right to 50% of dpiX’s total manufacturing capacity. In addition, the Company is required to pay for
50% of dpiX's fixed costs, as determined at the beginning of each calendar year. In January 2022, the fixed cost commitment was
determined and approved by the dpiX board of directors to be $13.2 million for calendar year 2022. As of September 30, 2022, the
Company estimated it has fixed cost commitments of $3.3 million related to this amended agreement through the remainder of
calendar year 2022. The amended agreement will continue unless the ownership structure of dpiX changes (as defined in the amended
agreement).
The Company has determined that dpiX Holding is a variable interest entity because at-risk equity holders, as a group, lack
the characteristics of a controlling financial interest. Majority votes are required to direct the manufacturing activities, legal operations
and other activities that most significantly affect dpiX’s economic performance. The Company does not have majority voting rights
and no power to unilaterally direct the activities of dpiX Holding and therefore is not the primary beneficiary of dpiX Holding. The
Company’s exposure to loss as a result of its involvement with dpiX Holding is limited to the carrying value of the Company’s
investment of $42.4 million and fixed cost commitments.
In November 2018, the Company (through one of its wholly-owned subsidiaries) and CETTEEN GmbH (“CETTEEN”),
formed a German limited liability company that governs the affairs and conduct of the business of VEC Imaging GmbH & Co. KG
(“VEC”), a joint venture formed to develop technology for use in X-ray imaging components. In accordance with the VEC agreement,
F-20
Table of Contents
net profits or losses are allocated to the members in accordance with their ownership interest. The Company's investment in VEC is
accounted for under the equity method of accounting. The Company has determined that VEC is a variable interest entity.
In fiscal years 2022, 2021 and 2020, the Company recorded a loss on the equity investment in VEC of $0.8 million,
$1.1 million, and $1.2 million respectively. The Company's investment in VEC was $2.5 million and $3.0 million as of September 30,
2022 and October 1, 2021, respectively. In fiscal years 2022 and 2021, the Company made contributions to VEC totaling $0.3 million
and $1.2 million, respectively. As of September 30, 2022 and October 1, 2021 the Company had loans outstanding to VEC totaling
$0.6 million and $0.3 million, respectively, and other receivables from VEC of $0.3 million at September 30, 2022 and October 1,
2021, respectively, which are recorded in prepaid expenses and other current assets in the Consolidated Balance Sheets.
5. RESTRUCTURING
In July 2018, the Company committed to relocate the production of amorphous silicon glass for digital detectors, from its
Santa Clara facility, to the jointly owned dpiX fabrication facility in Colorado. In July 2019, the Company committed to close its Santa
Clara facility and to relocate the remaining production to its other existing facilities. The Company ceased all operations at the Santa
Clara facility as of October 2, 2020, and all activities related to the closure of the facility were completed by the end of December
2020. In connection with the relocation of the glass production and site closure, the Company recorded $0.0 million, $0.0 million and
$9.1 million of restructuring charges during fiscal years 2022, 2021 and 2020, respectively.
On July 29, 2020, the Company commenced the implementation of a reduction in workforce to reduce the Company’s
operating costs and address the impact of the COVID-19 pandemic. This action resulted in the reduction of the Company’s workforce
by approximately 94 employees, of whom nearly all were located within the United States. This reduction was in addition to the
reduction in workforce associated with the closure of the Company’s Santa Clara facility.
Cash outflows associated with these restructuring charges are limited to employee termination expenses, facility closure and
equipment sales and disposals. Below is a detail of restructuring charges incurred during the 2022, 2021 and 2020 fiscal years, which
predominately relate to the Company's Medical segment:
(In millions)
Location of Restructuring Charges in
Consolidated Statements of Operations
2022
2021
2020
Other assets impairment charges
Selling, general and administrative
$
1.8 $
— $
Inventory write downs
Accelerated depreciation
Severance costs
Facility closure costs
Cost of revenues
Cost of revenues
Selling, general and administrative
Selling, general and administrative
—
—
—
—
—
0.2
0.6
0.2
—
1.3
2.9
5.7
3.6
Total restructuring charges
$
1.8 $
1.0 $
13.5
6. OTHER FINANCIAL INFORMATION
The following table summarizes the Company’s accrued liabilities and other current liabilities:
(In millions)
Accrued compensation and benefits
Product warranty
Taxes payable
Right of return liability
Accrued interest
Other
September 30, 2022
October 1, 2021
$
37.5 $
7.9
11.3
6.8
11.7
6.2
44.2
8.5
8.0
6.7
12.5
9.8
89.7
Total accrued liabilities and other current liabilities
$
81.4 $
F-21
1.8
0.6
5.9
20.3
3.2
31.8
(2.1)
0.9
(2.7)
(3.7)
—
(7.6)
Table of Contents
The following table summarizes the Company’s other long-term liabilities:
(In millions)
Long-term income tax payable
Environmental liabilities
Defined benefit obligation liability
Long-term right of return liability
Long-term other
Total other long-term liabilities
The following table summarizes the Company’s other expense, net:
September 30, 2022
October 1, 2021
$
$
4.3 $
1.3
3.3
21.4
3.5
33.8 $
(In millions)
Loss from equity method investments
Change in fair value of deferred consideration
Impairment of investment
Realized losses on foreign currencies, net
Other
Total other expense, net
7. NET INCOME (LOSS) PER SHARE
2022
Fiscal Years
2021
2020
(3.0) $
(3.4) $
—
—
(1.5)
0.2
—
—
(0.2)
0.1
(4.3) $
(3.5) $
$
$
Basic net income (loss) per common share is computed by dividing the net income (loss) for the period by the weighted
average number of shares of common stock outstanding during the reporting period. Diluted net income (loss) per common share
reflects the effects of potentially dilutive securities, which is computed by dividing net income (loss) by the sum of the weighted
average number of common shares outstanding and dilutive common shares.
A reconciliation of the numerator and denominator used in the calculation of basic and diluted income per common share is
as follows:
(In millions, except per share amounts)
Net income (loss) attributable to Varex
Weighted average shares outstanding – basic
Dilutive effect of Convertible Senior Notes
Dilutive effect of share-based awards and other
Weighted average shares outstanding – diluted
Net income (loss) per share attributable to Varex – basic
Net income (loss) per share attributable to Varex – diluted
Anti-dilutive share-based awards, excluded
2022
Fiscal Year
2021
2020
$
30.3 $
17.4 $
39.8
1.3
0.5
41.6
0.76 $
0.73 $
3.0
39.3
0.6
0.4
40.3
0.44 $
0.43 $
2.8
$
$
(57.9)
38.8
—
—
38.8
(1.49)
(1.49)
3.5
Potentially dilutive shares, which are based on the weighted-average shares of common stock underlying stock options,
unvested stock awards, purchase rights granted under the employee stock purchase plan, warrants and convertible notes using the
treasury stock method or the if-converted method, as applicable, are included when calculating diluted net income (loss) per share
attributable to Varex when their effect is dilutive. Since we intend to settle in cash the principal outstanding under our Convertible
Senior Notes, we apply the treasury stock method applied using our average share price during the period when calculating their
potential dilutive effect, if any. Furthermore, in connection with the offerings of our notes, we entered into convertible note hedges and
warrants (see Note 9, Borrowings). However, our convertible note hedges are not included when calculating potentially dilutive shares
since their effect is always anti-dilutive. Warrants, which have a strike price above our average share price for the periods presented,
were out of the money and were not included in the tables above. Because the Company incurred a net loss for fiscal year 2020, none
of the potentially dilutive common shares were included in the diluted share calculation for that period as they would have been anti-
dilutive.
F-22
Table of Contents
8. FINANCIAL DERIVATIVES AND HEDGING ACTIVITIES
As part of the Company’s overall risk management practices, the Company enters into financial derivatives to manage its
financial exposures to foreign currency exchange rates and interest rates.
The Company records all derivatives on the Consolidated Balance Sheets at fair value. The accounting for changes in the fair
value of derivatives depends on the intended use of the derivative, whether the Company has elected to designate a derivative in a
hedging relationship and apply hedge accounting, and whether the hedging relationship has satisfied the criteria necessary to apply
hedge accounting. A qualitative assessment of hedge effectiveness is performed on a quarterly basis, unless facts and circumstances
indicate the hedge may no longer be highly effective, in which case the Company would test for effectiveness on a more frequent
basis. The changes in fair value for all trades that are not designated for hedge accounting are recognized in current period income.
The Company does not offset fair value amounts recognized for derivative instruments in its Consolidated Balance Sheets for
presentation purposes.
Credit risk related to derivative transactions reflects the risk that a party to the transaction could fail to meet its obligation
under the derivative contracts. Therefore, the Company’s exposure to the counterparty’s credit risk is generally limited to the amounts,
if any, by which the counterparty’s obligations to the Company exceed the Company’s obligations to the counterparty. The
Company’s policy is to enter into contracts only with financial institutions that meet certain minimum credit ratings to help mitigate
counterparty credit risk.
Derivatives Designated as Hedging Instruments - Cash Flow Hedges
During the twelve months ended October 2, 2020 the Company used interest rate swap contracts as cash flow hedges to
manage its exposure to fluctuations in LIBOR interest rates. Interest rate swap contracts effectively fix the LIBOR component of
variable interest rate debt for a specific period of time.
During the twelve months ended September 30, 2022, the Company entered into forward contracts which have been
designated as cash flow hedges and are intended to manage its risk of variability in foreign currency-denominated contracts. All
changes in fair value of the derivatives designated as cash flow hedges are reported in accumulated other comprehensive income in the
Consolidated Balance Sheet.
As of September 30, 2022, the Company had the following outstanding derivatives designated as cash flow hedging
instruments.
(In millions, except for number of instruments)
Number of Instruments
Notional Value
Forward contracts
4
$
2.5
The following table summarizes the amount of pre-tax loss recognized from derivative instruments for the periods indicated:
Amount of Loss Recognized in OCI on
Derivatives
Fiscal Year Ended
(In millions)
2022
2021
2020
Interest rate swap contracts
$
— $
Forward contracts
(0.8)
$
(0.8) $
— $
—
— $
(3.4)
—
(3.4)
Location of Loss
Reclassified from
Accumulated OCI
into Income
Interest expense
Interest expense
Amount of Loss Reclassified from
Accumulated OCI into Income
Fiscal Year Ended
2022
2021
2020
$
$
— $
—
— $
— $
—
— $
(1.5)
—
(1.5)
These derivative instruments are subject to master netting agreements giving effect to rights of offset with each counterparty.
None of the balances were eligible for netting. The following table summarizes the gross fair values of derivative instruments as of the
periods indicated and the line items in the accompanying Consolidated Balance Sheets where the instruments are recorded:
(In millions)
Derivatives designated as cash flow hedges
Balance sheet location
Derivative Liabilities
2022
Forward contracts
Accrued liabilities and other current liabilities
$
0.3
Derivatives Designated as Hedging Instruments - Net Investment Hedges
The Company uses cross currency swap contracts as net investment hedges to manage its risk of variability in foreign
currency-denominated net investments in majority-owned international operations. All changes in fair value of the derivatives
designated as net investment hedges are reported in accumulated other comprehensive income along with the foreign currency
translation adjustments on those investments. In September 2020, the Company terminated one of the net investment swaps and the
F-23
Table of Contents
loss on the swap was recorded in accumulated other comprehensive income where it will remain until substantial liquidation of the
international operations.
As of September 30, 2022, the Company had the following outstanding derivatives designated as net investment hedging
instruments:
(In millions, except for number of instruments)
Cross currency swap contracts
Number of
Instruments
Notional Value
3
$
66.6
The following table summarizes the amount of pre-tax gain (loss) recognized from derivative instruments for the periods
indicated and the line items in the accompanying statements of operations where the results are recorded for net investment hedges:
Amount of Gain or (Loss) Recognized in OCI
on Derivatives
Fiscal Year Ended
(In millions)
2022
2021
2020
Location of Gain or
(Loss) Recognized in
Income on Derivative
(Amount Excluded from
Effectiveness Testing)
Amount of Gain Recognized in Income on
Derivative (Amount Excluded from
Effectiveness Testing)
2022
2021
2020
Cross currency swap
contracts
$
8.7 $
(0.3) $
(1.3)
Interest expense
$
1.2 $
1.3 $
1.5
These derivative instruments are subject to master netting agreements giving effect to rights of offset with each counterparty.
None of the balances were eligible for netting. The following table summarizes the gross fair values of derivative instruments as of the
periods indicated and the line items in the accompanying Consolidated Balance Sheets where the instruments are recorded:
(In millions)
Derivatives Designated as Net Investment Hedges
Balance Sheet Location
Cross currency swap contracts
Cross currency swap contracts
Cross currency swap contracts
Balance Sheet Hedges
Prepaid expenses and other current assets
Other assets
Other long-term liabilities
Derivative Assets and Liabilities
2022
2021
$
$
1.2 $
6.3
— $
1.2
—
2.4
The Company also enters into foreign currency forward contracts to hedge fluctuations associated with foreign currency-
denominated monetary assets and liabilities, primarily cash, lease contracts, third-party accounts receivable and payable, and
intercompany accounts receivable and payables. These forward contracts expire within 30 days. These forward contracts are not
designated for hedge accounting treatment; therefore, the change in fair value of these derivatives is recorded as a component of other
expense, net and offsets the change in fair value of the foreign currency-denominated assets and liabilities, which are also recorded in
other expense, net. The Company has not and does not intend to use derivative financial instruments for speculative or trading
purposes.
The following table shows the notional amounts of outstanding foreign currency contracts as of September 30, 2022:
(In millions of equivalent USD)
Indian Rupee
Chinese Renminbi
Euro
Total notional value
Notional Value of Derivatives not
Designated as Hedging Instruments:
Buy contracts
Sell contracts
$
$
—
—
—
—
$
$
5.2
11.1
9.1
25.4
F-24
Table of Contents
9. BORROWINGS
The following table summarizes the Company's short-term and long-term debt:
(In millions, except for percentages)
Amount
Weighted-Avg
Effective Interest
Rate
Amount
Weighted-Avg
Effective Interest
Rate
$ Change
September 30, 2022
October 1, 2021
Current maturities of long-term debt
Other debt
Total current maturities of long-term debt
Non-current maturities of long-term debt:
Convertible Senior Unsecured Notes
Senior Secured Notes
Other debt
$
$
$
2.1
2.1
200.0
243.0
4.6
$
$
$
2.8
2.8
200.0
270.0
7.8
10.9%
8.2%
$
$
$
(0.7)
(0.7)
—
(27.0)
(3.2)
10.9%
8.2%
Total non-current maturities of long-term debt:
$
447.6
$
477.8
$
(30.2)
Unamortized issuance costs and debt discounts
Unamortized discount - Convertible Notes
$
(28.7)
$
(37.6)
Unamortized issuance costs - Convertible Notes
Debt issuance costs - Senior Secured Notes
Total
Total debt outstanding, net
Equity component of Convertible Senior Unsecured
Notes(1)
(3.1)
(3.5)
(35.3)
414.4
49.7
$
$
$
(1) Included in additional paid-in capital on the Consolidated Balance Sheets.
(4.1)
(4.4)
(46.1)
434.5
49.7
$
$
$
Future principal payments of long-term debt outstanding as of September 30, 2022 are as follows:
(In millions)
Fiscal years:
2023
2024
2025
2026
2027
Thereafter
Total debt outstanding
Less: current maturities of long-term debt
Non-current portion of long -term debt
$
$
$
$
8.9
1.0
0.9
10.8
(20.1)
—
$
$
$
2.1
1.4
201.4
1.2
243.6
—
449.7
(2.1)
447.6
F-25
Table of Contents
The following table summarizes the Company's interest expense:
Contractual interest coupon and other
Amortization/extinguishment of debt issuance costs
Amortization of debt discounts
Total interest expense
Convertible Senior Unsecured Notes
Twelve Months Ended
September 30, 2022
October 1, 2021
October 2, 2020
$
$
27.6
$
30.7
$
3.4
8.8
3.5
7.9
39.8
$
42.1
$
19.1
7.0
5.3
31.4
On June 9, 2020, Varex issued $200.0 million in aggregate principal amount of 4.00% convertible senior unsecured notes due
2025 (“Convertible Notes”). The net proceeds from the issuance of the Convertible Notes, after deducting transaction fees and offering
expense payable by the Company, were approximately $193.1 million. The Convertible Notes bear interest at the annual rate of
4.00%, payable semiannually on June 1 and December 1 of each year, beginning on December 1, 2020, and will mature on June 1,
2025, unless earlier converted or repurchased by us.
Call Spread
On June 4, 2020 and June 5, 2020, in connection with the offering of the Convertible Notes, Varex entered into privately
negotiated convertible note hedge transactions (collectively, the “Hedge Transactions”). The Hedge Transactions cover, subject to
customary anti-dilution adjustments, the number of shares of Varex common stock that initially underlie the Convertible Notes. The
Hedge Transactions are expected generally to reduce the potential dilution and/or offset any cash payments Varex is required to make
in excess of the principal amount due upon conversion of the Convertible Notes in the event that the market price of Varex common
stock is greater than the strike price of the Hedge Transactions, which was initially $20.81 per share (subject to adjustment under the
terms of the Hedge Transactions). The strike price of $20.81 corresponds to the initial conversion price of the Convertible Notes. The
number of shares underlying the Hedge Transactions is 9.6 million.
On June 4, 2020 and June 5, 2020, Varex also entered into privately negotiated warrant transactions (collectively, the
“Warrant Transactions” and, together with the Hedge Transactions, the “Call Spread Transactions”), whereby the Company sold
warrants at a higher strike price relating to the same number of shares of Varex common stock that initially underlie the Convertible
Notes, subject to customary anti-dilution adjustments. The initial strike price of the warrants is $24.975 per share (subject to
adjustment under the terms of the Warrant Transactions), which is 50% above the last reported sale price of Varex common stock on
June 4, 2020. The Warrant Transactions could have a dilutive effect to the Company's stockholders to the extent that the market price
per share of Varex common stock, as measured under the terms of the Warrant Transactions, exceeds the applicable strike price of the
warrants. The number of shares underlying the Warrant Transactions is 9.6 million. The number of warrants outstanding as of
September 30, 2022, was 9.6 million.
Senior Secured Notes
Varex issued $300.0 million aggregate principal amount of 7.875% Senior Secured Notes due 2027 (the "Senior Secured
Notes") pursuant to an indenture dated September 30, 2020, among Varex, certain of its direct or indirect wholly-owned subsidiaries
as guarantors, and Wells Fargo Bank, National Association as trustee and collateral agent. Interest payments are paid semiannually on
April 15 and October 15 of each year, beginning on April 15, 2021.
The Senior Secured Notes are secured by a first priority lien on substantially all of the assets of Varex and the assets and
capital stock of its subsidiary guarantors (subject to exceptions), except for assets for which a first priority security interest is pledged
for the ABL Facility (defined below), in which the Senior Secured Notes will have a second lien security interest. The Senior Secured
Notes include negative covenants, subject to certain exceptions, restricting or limiting Varex's ability and the ability of its restricted
subsidiaries to, among other things, incur liens on collateral; sell certain assets; incur additional indebtedness; pay dividends; issue
preferred shares; consolidate, merge, or sell all or substantially all of its assets; and enter into certain transactions with their affiliates.
On July 15, 2021, the Company redeemed $30 million of Senior Secured Notes, in accordance with the terms and conditions
of the governing indenture, by paying cash of $31.5 million, inclusive of the redemption premium and accrued interest, and recognized
a $1.4 million loss related to the redemption premium and the write-off of previously recorded debt issuance costs. The redemption
price of the redeemed notes was 103% of the principal amount, plus accrued and unpaid interest from, and including, April 15, 2021
to, but excluding, the redemption date of July 15, 2021.
F-26
Table of Contents
On March 18, 2022, the Company redeemed $27 million of Senior Secured Notes, in accordance with the terms and
conditions of the governing indenture, by paying cash of $28.7 million, inclusive of the redemption premium and accrued interest, and
recognized a $1.2 million loss related to the redemption premium and the write-off of previously recorded debt issuance costs. The
redemption price of the redeemed notes was 103% of the principal amount, plus accrued and unpaid interest from, and including,
October 15, 2021 to, but excluding, the redemption date of March 18, 2022. As of September 30, 2022, the aggregate principal amount
of the outstanding Senior Secured Notes was $243.0 million.
Asset-Based Loan
Concurrent with the termination of the Credit Agreement (defined below) and closing of the Senior Secured Notes on
September 30, 2020, the Company entered into a revolving credit agreement consisting of a $100.0 million asset-based loan revolving
credit facility (the “Asset-Based Loan”, or "ABL Facility").
From September 30, 2020 through March 9, 2022, borrowings under the Asset-Based Loan bore interest at floating rates
based on LIBOR, or a comparable rate, or a base rate, and an applicable margin based on Average Daily Excess Availability (as
defined in the Asset-Based Loan Agreement). In addition, the Company was required to pay a quarterly commitment fee of 0.375% to
0.5%, based on the aggregate unused commitments under the Asset-Based Loan.
On March 9, 2022, the ABL Facility was amended to transition the reference rate for certain dollar denominated advances to
the Secured Overnight Financing Rate ("SOFR") from the London Interbank Offered Rate ("LIBOR") and the quarterly commitment
fee was amended to 0.25%, based on the aggregate unused commitments under the Asset-Based Loan. Additionally, the applicable
margin rates were reduced by 75 basis points and the interest rate floor was reduced from 50 basis points to 0 basis points.
The ABL Facility matures on the earlier of September 30, 2025 or 91 days prior to the maturity of the Convertible Notes, at
which time all outstanding amounts under the ABL Facility will be due and payable. The maximum availability under our ABL
Facility is $100.0 million; however, the borrowing base under the ABL fluctuates from month-to-month depending on the amount of
eligible accounts receivable, inventory, and real estate. As of September 30, 2022, the amount available under our ABL Facility was
$94.5 million, and the ABL Facility remains undrawn.
The ABL Facility includes various restrictive covenants that limit our ability to engage in certain transactions, including the
incurrence of debt, payment of dividends and other restrictive payments, existence of restrictions affecting subsidiaries, sales of stock
and assets, certain affiliate transactions, modifications of debt documents and organizational documents, changes to line of business
and fiscal year, incurrence of liens, making fundamental changes, prepayments of junior indebtedness, and certain other transactions.
The ABL Facility contains a minimum Fixed Charge Coverage Ratio of 1.00 to 1.00 that is tested when excess availability
under the ABL is less than the greater of (i) 10.0% of the Loan Cap (the lesser of (a) the aggregate commitments under the ABL
Facility and (b) the aggregate borrowing base) and (ii) $7.5 million. As of September 30, 2022, the Company is compliant with the
ABL Facility covenants.
The ABL Facility will have a first lien security interest on accounts receivable, cash, and inventory as well as certain real
estate and holds second lien security interest on all other assets.
Credit Agreement
On May 1, 2017 Varex entered into a secured revolving credit facility (the “Revolving Credit Facility”) in an aggregate
principal amount of up to $200.0 million with a term of five years, and a secured term facility (the “Term Facility” and together with
the Revolving Credit Facility, the “Credit Agreement”) in an aggregate principal amount of $400.0 million, which was subsequently
amended.
On September 30, 2020, the Company terminated the Credit Agreement. The Company repaid the outstanding Term Facility
balance of $265.5 million and accrued interest of $2.0 million with proceeds received from the issuance of the Senior Secured Notes
(defined above) and wrote off approximately $3.8 million of previously recorded debt issuance costs, which resulted in a $3.8 million
loss on extinguishment of debt, recorded as interest expense within the Consolidated Statements of Operations.
10. FAIR VALUE
Assets/Liabilities Measured at Fair Value on a Recurring Basis
The fair values of certain of the Company’s financial instruments, including bank deposits included in cash and cash
equivalents, accounts receivable, net and accounts payable, approximate their fair values due to their short maturities. As of
September 30, 2022, the fair value of the Company's Convertible Notes and Senior Secured Notes, as defined in Note 9, Borrowings
F-27
Table of Contents
and measured using Level 1 inputs, were $250.2 million and $241.3 million, respectively. As of October 1, 2021, the fair values of the
Company's Convertible Notes and Senior Secured Notes, measured using Level 1 inputs, were $296.3 million and $304.8 million,
respectively. The Company has elected to use the income approach to value its derivative instruments using standard valuation
techniques and Level 2 inputs, such as currency spot rates, forward points and credit default swap spreads. There were no financial
assets or liabilities measured on a recurring basis using significant unobservable inputs (Level 3) and there were no transfers in or out
of Level 1, 2 or 3 during fiscal year 2022.
In the tables below, the Company has segregated all assets and liabilities that are measured at fair value on a recurring basis
into the most appropriate level within the fair value hierarchy based on the inputs used to determine the fair value at the measurement
date.
(In millions)
Assets:
Money market funds
Commercial paper
Corporate notes/bonds
Government agencies
US Treasury bills
Derivative assets
Marketable equity securities
Total assets measured at fair value
Liabilities:
Derivative liabilities
Total liabilities measured at fair value
$
$
$
Fair Value Measurements at September 30, 2022
Quoted Prices in
Active Markets for
Identical Assets and
Liabilities
(Level 1)
Significant Other
Observable Inputs
(Level 2)
Significant
Unobservable Inputs
(Level 3)
Total
$
— $
36.6 $
— $
—
—
—
—
—
2.5
5.9
3.6
0.3
10.2
7.5
—
—
—
—
—
—
—
2.5 $
64.1 $
— $
— $
— $
0.3 $
0.3 $
— $
— $
At October 1, 2021, the Company determined the following levels of inputs for the following assets or liabilities:
(In millions)
Assets:
Money market funds
Derivative assets
Total assets measured at fair value
Liabilities:
Derivative liabilities
Total liabilities measured at fair value
Fair Value Measurements at October 1, 2021
Quoted Prices in Active
Markets for Identical
Assets and Liabilities
(Level 1)
Significant Other
Observable Inputs
(Level 2)
Significant
Unobservable Inputs
(Level 3)
Total
$
$
$
$
— $
—
— $
— $
— $
88.2 $
1.2
89.4 $
2.4 $
2.4 $
— $
—
— $
— $
— $
The Company holds assets under its deferred compensation plan which total $5.4 million as of September 30, 2022.
F-28
36.6
5.9
3.6
0.3
10.2
7.5
2.5
66.6
0.3
0.3
88.2
1.2
89.4
2.4
2.4
Table of Contents
Marketable Debt Securities
The following is a summary of marketable debt securities, which are included within the cash and cash equivalents, prepaid
expenses and other current assets, and other assets balances on the Consolidated Balance Sheets.
(In millions)
Commercial paper
Corporate notes/bonds
US Treasury bills
Government agencies
Total marketable debt securities
$
$
Amortized Costs
Unrealized Gains
Unrealized Losses
Fair Value
5.9 $
— $
— $
September 30, 2022
3.7
10.2
0.3
—
—
—
(0.1)
—
—
20.1 $
— $
(0.1) $
On October 1, 2021, the Company did not hold any marketable debt securities.
The contractual maturities of marketable debt securities as of September 30, 2022, are shown in the table below. Actual
maturities may differ from contractual maturities because borrowers may have the right to call or prepay obligations.
(In millions)
Contractual maturities:
Due within one year
Due after one year through five years
Total marketable debt securities
September 30, 2022
Amortized Costs
Fair Value
$
$
17.8 $
2.3
20.1 $
5.9
3.6
10.2
0.3
20.0
17.7
2.3
20.0
During the twelve months ended September 30, 2022, there were no gross realized gains or losses from the sale of certain
marketable debt securities that were reclassified out of accumulated other comprehensive income.
The following table summarizes the balance sheet locations for marketable debt securities:
September 30, 2022
(In millions)
Commercial paper
Corporate notes/
bonds
Government
agencies
Treasury Bills
Total
Cash and cash equivalents
$
— $
— $
— $
3.3 $
Prepaid expenses and other current
assets
Other assets
5.9
—
1.9
1.7
0.3
—
6.4
0.5
Total marketable debt securities
$
5.9 $
3.6 $
0.3 $
10.2 $
3.3
14.5
2.2
20.0
11. GOODWILL AND INTANGIBLE ASSETS
The following table reflects goodwill by reportable segment:
(In millions)
Balance at October 1, 2021
Foreign currency translation adjustments
Balance at September 30, 2022
Medical
Industrial
Total
$
$
173.9 $
118.3 $
(4.5)
(3.2)
169.4 $
115.1 $
292.2
(7.7)
284.5
F-29
Table of Contents
The following table reflects the gross carrying amount and accumulated amortization of the Company’s finite-lived intangible
assets included in other assets in the Consolidated Balance Sheets:
September 30, 2022
October 1, 2021
(In millions)
Gross Carrying
Amount
Accumulated
Amortization
Net Carrying
Amount
Gross Carrying
Amount
Accumulated
Amortization
Net Carrying
Amount
Acquired existing technology
$
70.0 $
(49.9) $
20.1 $
74.2 $
(45.5) $
Patents, licenses and other
Customer contracts and supplier
relationship
12.3
49.6
(11.6)
(36.8)
0.7
12.8
12.8
51.1
(10.9)
(31.0)
Total intangible assets
$
131.9 $
(98.3) $
33.6 $
138.1 $
(87.4) $
28.7
1.9
20.1
50.7
Amortization expense for intangible assets was $14.6 million, $16.8 million and $17.2 million in fiscal years 2022, 2021 and
2020, respectively. The Company recognized intangible asset impairment charges of $0.0 million, $0.0 million, and $2.8 million in
fiscal years 2022, 2021, and 2020, respectively, which are included in the Consolidated Statements of Operations under impairment of
intangible assets. These impairment charges related primarily to the Company's Medical reporting segment.
As of September 30, 2022, the estimated future amortization expense of intangible assets with finite lives is as follows:
(In millions)
Fiscal years:
2023
2024
2025
2026
2027
Thereafter
Total
$
$
12.9
8.7
2.6
2.5
2.4
4.5
33.6
12. COMMITMENTS AND CONTINGENCIES
Lease Commitments
See Note 3, Leases, included in this report, for additional information about the Company's lease commitments.
Purchase Agreement With Supplier
During fiscal year 2020, Varex entered into a purchase agreement with a supplier to acquire certain equipment and
intellectual property from the supplier that is utilized to manufacture X-ray cables utilized in Varex's products. As of September 30,
2022, transfer of the underlying equipment has been completed and installation and calibration is underway. All activities related to
this asset purchase are expected to be completed during the 2023 fiscal year. Total consideration to be paid by Varex for the acquired
assets is expected to be ¥1,084.7 million, subject to potential decreases for costs incurred by the Company. On April 14, 2022, we
entered into a foreign currency hedge related to this Japanese Yen payment, which is expected to fix the purchase price of these assets
at approximately $7.9 million. As of September 30, 2022, the Company has made payments totaling $5.4 million and estimates that
our remaining cash payments to be made total $2.5 million.
Other Commitments
See Note 4, Related-Party Transactions, included in this report, for additional information about the Company’s
commitments to dpiX.
See Note 13, Noncontrolling Interests, included in this report, for additional information about the Company’s commitment
to the noncontrolling shareholders of MeVis.
The Company has an environmental liability of approximately $1.6 million as of September 30, 2022.
In the fourth quarter of fiscal year 2022, the Company entered into several agreements with a third-party company, whose
stock is publicly traded on a foreign exchange. Under these agreements, the Company will make certain milestone payments of up to
F-30
Table of Contents
$5 million upon achievement of specified milestones. During fiscal year 2022, the first of these milestones was achieved and the
Company paid $1 million to the third party company, which was recorded in research and development in the Consolidated Statements
of Operations. The remaining milestones are expected to be achieved in fiscal year 2023.
In addition, the Company agreed to acquire, through two separate purchases, a fixed number of shares for consideration of
approximately $5 million, representing 9.9% of the shares of the third-party company outstanding on the date the agreements were
signed. The Company completed the acquisition of the first tranche of shares during fiscal year 2022 for approximately $2.4 million.
The Company has recorded this investment as marketable equity securities, which is included in other assets on the Consolidated
Balance Sheet. Refer to Note 1, Summary of Significant Accounting Policies, and Note 10, Fair Value. The second tranche of the
investment is subject to foreign regulatory approval and, if approved, is expected to be completed in fiscal year 2023.
Contingencies
The Company did not have any material contingent liabilities as of September 30, 2022 and October 1, 2021. Legal expenses
are expensed as incurred.
13. NONCONTROLLING INTERESTS
In April 2019, a subsidiary of Varex acquired 98.2% of the outstanding shares of common stock of Direct Conversion. In
April 2021, the Company acquired all of the remaining shares representing the noncontrolling interests in Direct Conversion such that
the Company now owns 100% of the outstanding shares of common stock of Direct Conversion. As a result, the Company
consolidates Direct Conversion's operations in its consolidated financial statements and no longer records any noncontrolling interest
in the equity section of the Company's Consolidated Balance Sheets related to Direct Conversion
In September 2018, the Company entered into a partnership in Saudi Arabia. The Company has majority voting rights with an
approximate 75% interest. Accordingly, the Company has consolidated the operations of the Saudi Arabia partnership in the
Company's consolidated financial statements and recorded the noncontrolling interests. The noncontrolling interest related to the
partner’s 25% interest in the joint venture is included in noncontrolling interests in the equity section of the Company’s Consolidated
Balance Sheets. Income representing the noncontrolling partner's share of income from operations is included in the Company's
Consolidated Statements of Operations.
In April 2015, the Company completed the acquisition of 73.5% of the then outstanding shares of MeVis Medical Solutions
AG (“MeVis”), a public company based in Bremen, Germany that provides image processing software and services for cancer
screening. In August 2015, the Company, through one of its German subsidiaries, entered into a domination and profit and loss
transfer agreement (the “DPLTA”) with MeVis. In October 2015, the DPLTA became effective upon its registration at the local court
of Bremen, Germany. Under the DPLTA, MeVis subordinates its management to the Company and undertakes to transfer all of its
annual profits and losses to the Company. In return, the DPLTA grants the noncontrolling shareholders of MeVis: (1) an annual
recurring net compensation of €0.95 per MeVis share starting from January 1, 2015 and (2) a put right for their MeVis shares at
€19.77 per MeVis share. During fiscal year 2018, an immaterial number of MeVis’ shares were purchased under the put right. During
the fourth quarter of fiscal year 2020, the put right granted to the noncontrolling shareholders of MeVis under the DPLTA expired
unexercised, which resulted in the redeemable noncontrolling interests being reclassified to permanent equity as noncontrolling
interest in the Consolidated Balance Sheet. As of September 30, 2022, noncontrolling shareholders together held approximately 0.5
million shares of MeVis, representing 26.3% of the outstanding shares.
Changes in noncontrolling interests and redeemable noncontrolling interests were as follows:
(In millions)
Balance at beginning of period
Net income attributable to noncontrolling interests
Other, including foreign currency remeasurement
Balance at end of period
Fiscal Years
2022
2021
Noncontrolling
Interests
Noncontrolling
Interest
$
$
13.2
$
0.5
(0.4)
13.3
$
14.1
0.5
(1.4)
13.2
F-31
Table of Contents
14. EMPLOYEE STOCK PLANS
Employee Stock Plans
Certain of the Company's employees participate in the Varex Imaging Corporation 2020 Omnibus Stock Plan (the “2020
Stock Plan”), the 2017 Omnibus Stock Plan (the “2017 Stock Plan”), and the Varex Imaging Corporation 2017 Employee Stock
Purchase Plan (the “2017 ESPP”) which allow the grants of stock options, restricted stock units and performance shares among other
types of awards to eligible employees.
In January 2017, Varex stockholders approved the 2017 ESPP, which provides eligible employees with an opportunity to
purchase shares of Varex common stock at 85% of the lower of its fair market value at the start and end of a six-month purchase
period. During the fiscal year 2022, the Company's Board of Directors approved an increase in the number of shares available for
issuance under the 2017 ESPP of 0.8 million shares. As of September 30, 2022 the 2017 ESPP provides for the purchase of up
to 1.8 million shares of Varex common stock.
Share-Based Compensation Expense
Share-based compensation expense recognized in the Consolidated Statements of Operations is based on awards ultimately
expected to vest. Share-based compensation expense includes expenses related to the Company’s direct employees.
The table below summarizes the effect of recording share-based compensation expense and for the option component of the
employee stock purchase plan shares:
(In millions)
Cost of revenues
Research and development
Selling, general and administrative
Total share-based compensation expense
2022
Fiscal Year
2021
2020
$
$
1.6 $
3.1
9.3
1.4 $
3.0
9.5
14.0 $
13.9 $
1.1
2.5
9.8
13.4
The unrecognized share-based compensation cost as of September 30, 2022 was $23.2 million, and is expected to be
recognized over a weighted average period of 2.5 fiscal years. As of September 30, 2022, there were approximately 3.2 million and
0.8 million shares of common stock available for future issuances under the 2020 Stock Plan and the 2017 ESPP, respectively.
The Company utilized the Black-Scholes valuation model for estimating the fair value of stock options granted and the option
component of ESPP grants. The Company calculated the fair value of option grants and option component of ESPP grants on the
respective dates of grant using the following weighted average assumptions:
Expected term (in years)
Risk-free interest rate
Expected volatility
Expected dividend
Weighted average fair value at grant date
Employee Stock Option Plan
Employee Stock Purchase Plans
Fiscal Year
Fiscal Year
2022
2021
2020
2022
2021
2020
7.0
1.4 %
42.7 %
— %
$12.07
7.0
1.0 %
41.5 %
— %
$9.37
6.1
1.1 %
36.9 %
— %
$7.53
0.4
1.6 %
33.6 %
— %
$5.41
0.5
0.1 %
68.4 %
— %
$5.90
0.5
0.9 %
50.0 %
— %
$7.94
Option valuation methods, including Black-Scholes, require the input of subjective assumptions, which are discussed below.
Risk-Free Interest Rate
The interest rates used are based on the implied yield currently available on U.S. Treasury zero-coupon issues with an
equivalent remaining term equal to the expected life of the award.
Expected Term
Options granted generally vest over a period of 36 to 48 months and expire 7 to 10 years from date of grant. Employee stock
purchase plan offering periods are typically 6 months and provides eligible employees with an opportunity to purchase shares of Varex
F-32
Table of Contents
common stock at 85% of the lower of its fair market value at the start or end of a six-month purchase period. The Company has
elected to use the simplified method in calculating the expected term of its options due to a lack of sufficient historical information.
Expected Dividend Yield
The dividend rate used is zero as the Company has never paid any cash dividends on its common stock and does not
anticipate doing so in the foreseeable future. The Company is also restricted from paying dividends on common stock under its debt
facilities.
Expected Volatility
Authoritative accounting guidance on stock-based compensation indicates that companies should consider volatility over a
period generally commensurate with the expected or contractual term of the stock option. Adequate Company-specific data does not
exist for this time period as the Company began trading in January 2017. The volatility variable used is a blended approach by using
the Company's historic data for the years it has been publicly traded and a benchmark of other comparable companies’ volatility rates
for the prior years.
Stock Option Activity
The following table summarizes the activity for stock options under Varex’s employee incentive plans for the Company’s
employees:
(In thousands, except per share amounts and the
remaining term)
Outstanding at October 1, 2021
Granted
Canceled, expired or forfeited
Exercised
Outstanding at September 30, 2022
Exercisable at September 30, 2022
Options
Price range
2,811
$13.61 - $37.60
319
(90)
(138)
2,902
2,085
$30.95 - $30.95
$25.17 - $31.42
$13.61 - $30.74
$13.61 - $37.60
$13.61 - $37.60
Weighted
Average
Exercise
Price
Weighted
Average
Remaining
Term (in
years)
Aggregate
Intrinsic
Value (1)
$
$
$
$
$
$
28.69
30.95
30.22
27.11
28.97
29.81
4.7
$
5,161.0
4.5
3.1
$
$
1,361.4
666.1
(1) The aggregate intrinsic value represents the total pre-tax intrinsic value, which is computed based on the difference between the exercise price and
the closing price of Varex common stock of $21.14 as of September 30, 2022, the last trading date of the Company's respective fiscal years, and
which represents the amount that would have been received by the option holders had all option holders exercised their options and sold the shares
received upon exercise as of that date.
The grant-date fair value of options granted during fiscal years 2022, 2021 and 2020 was $3.9 million, $3.7 million and
$4.4 million, respectively. The total intrinsic value of the options exercised during the years ended September 30, 2022, October 1,
2021 and October 2, 2020 was $0.5 million, $0.0 million and $0.4 million, respectively.
Restricted Stock Units, Restricted Stock Awards and Deferred Stock Units
The following table summarizes the activity for restricted stock units, restricted stock awards and deferred stock units under
the 2020 Stock Plan:
(In thousands, except per share amounts)
Balance at October 1, 2021
Granted
Vested
Canceled, expired or forfeited
Balance at September 30, 2022
Number of Shares
Weighted Average
Grant-Date Fair
Value
1,080 $
392
(364)
(63)
1,045 $
23.25
27.53
24.83
22.31
24.35
The total grant-date fair value of shares granted was $10.8 million, $8.9 million and $11.9 million for fiscal years 2022, 2021
and 2020, respectively. Shares outstanding at September 30, 2022, October 1, 2021 and October 2, 2020 had an estimated market
value of $22.1 million, $30.9 million and $11.8 million, respectively.
F-33
Table of Contents
15. TAXES ON INCOME
Income tax expense or benefit is based on reported income or loss before income taxes. Deferred income taxes reflect the
effect of temporary differences between asset and liability amounts that are recognized for financial reporting purposes and the
amounts that are recognized for income tax purposes. These deferred taxes are measured by applying currently enacted tax laws.
Valuation allowances are recognized to reduce deferred tax assets to the amount that is more likely than not to be realized.
Income tax expense (benefit) was as follows:
(In millions)
Current income tax expense (benefit)
Federal
State and local
Foreign
Total current
Deferred income tax expense (benefit):
Federal
State and local
Foreign
Total deferred
Income tax expense (benefit)
2022
Fiscal Years
2021
2020
$
$
$
$
$
3.7 $
5.4 $
0.2
10.3
1.4
6.8
14.2 $
13.6 $
0.4 $
(0.9)
—
(0.5) $
13.7 $
1.8 $
(1.3)
(3.4)
(2.9) $
10.7 $
(16.3)
(1.4)
5.7
(12.0)
(1.7)
0.6
(2.1)
(3.2)
(15.2)
Income (loss) before taxes are generated from the following geographic areas:
(In millions)
United States
Foreign
Income (loss) before taxes
2022
Fiscal Years
2021
2020
$
$
16.4 $
28.1
44.5 $
(4.1) $
32.7
28.6 $
(74.1)
1.5
(72.6)
The effective tax rate differs from the U.S. federal statutory tax rate as a result of the following:
Federal statutory income tax rate
State and local taxes, net of federal tax benefit
Statutory rate change impact on prior year deferreds
Return to provision
Research and development credit
Prior year research and development credit
Foreign rate difference
Foreign research innovation box
Change in valuation allowance
U.S. tax reform - international provisions
U.S. net operating loss carryback
Other
Effective tax rate
2022
Fiscal Years
2021
2020
21.0 %
21.0 %
21.0 %
(1.4)
1.1
(2.1)
(0.9)
—
6.5
—
6.3
(4.6)
—
4.9
30.8 %
0.3
—
4.2
(4.2)
(0.3)
1.7
(3.8)
8.4
(0.7)
5.2
5.6
37.4 %
1.0
—
2.8
3.7
—
(0.4)
—
(11.0)
—
5.6
(1.8)
20.9 %
During fiscal year 2022, the Company's effective tax rate varied from the U.S. federal statutory rate of 21% primarily due to
the unfavorable impact of profit in foreign jurisdictions with statutory tax rates greater than 21% and also U.S. deferred tax attributes
and losses in certain foreign jurisdictions for which a valuation allowance is provided. These unfavorable items are partially offset by
the favorable impact of U.S. tax reform international provisions, return to provision adjustments, and R&D tax credits.
F-34
Table of Contents
During fiscal year 2021, the Company’s effective tax rate varied from the U.S. federal statutory rate of 21% primarily
because of the unfavorable impact of U.S. deferred tax attributes and losses in certain foreign jurisdictions for which a valuation
allowance is provided and a reduction in benefit for U.S. net operating losses carried back to prior years. These unfavorable items are
partially offset by the favorable impact of R&D tax credits and U.S. tax reform international provisions.
During fiscal year 2020, the Company’s effective tax rate varied from the U.S. federal statutory rate of 21% primarily
because of the favorable impact of U.S. net operating losses to be carried back to tax years with greater U.S. federal statutory rates.
These favorable tax items were mostly offset by the unfavorable impact of additional losses in certain foreign jurisdictions, limitations
on interest expense, and R&D credits for which no benefit is recognized.
The Company has estimated its fiscal year 2022 GILTI (global intangible low-taxed income), BEAT (base-erosion anti-abuse
tax), FDII (foreign-derived intangible income), limitations on interest expense deductions, and other components of U.S. tax reform,
and have included these amounts in the calculation of the fiscal year 2022 tax provision. The Company has made an accounting policy
election, as allowed by the SEC and FASB, to recognize the impact of GILTI as a period cost if and when incurred.
Significant components of deferred tax assets and liabilities are as follows:
(In millions)
Deferred tax assets:
Inventory adjustments
Share-based compensation
Product warranty
Unrealized exchange gain
Deferred compensation
Net operating loss carryforwards
Accrued vacation
Accrued incentives
Credit carryforwards
Deferred financing fees
Interest expense limitation
Capitalized interest
Lease liabilities
Other
Valuation allowance
Total deferred tax assets
Deferred tax liabilities:
Acquired intangibles
Property, plant and equipment
Investments in privately held companies
Operating lease assets
Other
Total deferred tax liabilities
Net deferred tax assets
Reported As:
Deferred tax assets
Deferred tax liabilities
Net deferred tax assets (liabilities)
(1) Certain prior year amounts have been reclassified to conform to current year presentation.
F-35
September 30, 2022
October 1, 2021 (1)
$
6.4 $
6.3
1.4
2.6
1.3
19.7
0.9
2.8
2.5
2.4
3.9
0.9
5.4
2.5
59.0 $
(32.2)
26.8 $
(7.9) $
(8.8)
(1.4)
(5.6)
(1.3)
(25.0)
1.8 $
26.8 $
(25.0)
1.8 $
$
$
$
$
$
$
4.9
5.5
1.8
1.7
1.6
25.7
1.0
4.2
3.3
3.0
4.3
—
6.8
4.7
68.5
(30.2)
38.3
(13.9)
(13.0)
(1.8)
(6.5)
(1.3)
(36.5)
1.8
38.3
(36.5)
1.8
Table of Contents
The Company is maintaining its reinvestment assertion with respect to foreign earnings for the year ended September 30,
2022, which is that all earnings prior to fiscal year 2018 are permanently reinvested for all countries, and that all earnings for Direct
Conversion, located primarily in Sweden and Finland, are also indefinitely reinvested in those countries, but post fiscal year 2017
earnings in all other countries are not permanently reinvested. Due to the level of earnings available for repatriation, the treaty benefits
applicable to jurisdictions in which those earnings are located, and the now favorable U.S. tax treatment of repatriated foreign
earnings, the amount of deferred tax liability recorded related to the potential repatriation is approximately $0.1 million. This
estimated liability is for U.S. state income taxes and foreign withholding taxes that would apply if the foreign earnings were
repatriated in the form of a dividend.
As of September 30, 2022, the Company had foreign net operating loss carryforwards ("NOL") of approximately $19.3
million with $0.9 million expiring between 2022 and 2033 and $18.4 million carried forward indefinitely. During fiscal year 2022, the
Company received cash tax refunds related to NOL carryback claims for U.S. losses incurred during fiscal year 2020.
The valuation allowance relates primarily to net operating losses in certain foreign jurisdictions, limitations on interest
expense deductions, and other deferred tax attributes where, based on the weight of available evidence, it is more likely than not that
the tax benefit will not be realized. The valuation allowance increased by $2.0 million during fiscal year 2022 and increased by $1.5
million during fiscal year 2021. The increase during the current year was primarily related to other U.S. deferred tax attributes.
Changes in the Company's valuation allowance for deferred tax assets were as follows:
(In millions)
Valuation allowance balance–beginning of fiscal year
Other increases
Other decreases
Valuation allowance balance—end of fiscal year
2022
Fiscal Years
2021
2020
$
$
30.2 $
28.7 $
6.9
(4.9)
5.4
(3.9)
32.2 $
30.2 $
18.8
10.2
(0.3)
28.7
The Company accounts for uncertainty in income taxes following a two-step approach for recognizing and measuring
uncertain tax positions. The first step is to evaluate the tax position for recognition by determining whether the weight of available
evidence indicates that it is more likely than not that, based on the technical merits, the position will be sustained on audit, including
resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is
more than 50% likely of being realized upon settlement.
Changes in the Company’s unrecognized tax benefits were as follows:
(In millions)
Unrecognized tax benefits balance–beginning of fiscal year
Additions based on tax positions related to a prior year
Additions based on tax positions related to the current year
Reductions resulting from the expiration of the applicable statute of limitations
Unrecognized tax benefits balance—end of fiscal year
Fiscal Years
2022
2021
$
$
1.1 $
0.1
—
—
1.2 $
0.8
0.4
0.1
(0.2)
1.1
As of September 30, 2022 and October 1, 2021, the total amount of gross unrecognized tax benefits was $1.2 million and
$1.1 million, respectively, all of which would affect the effective tax rate if recognized.
The Company includes interest and penalties related to income taxes within income tax expense (benefit) on the Consolidated
Statements of Operations. For the year ended September 30, 2022, $0.2 million interest and penalties have been included for this
period. For the year ended October 1, 2021, $0.2 million interest and penalties have been included for this period. For the year ended
October 2, 2020, $0.1 million interest and penalties have been included for this period.
The Company files U.S. federal and state income tax returns and non-U.S. income tax returns in various jurisdictions. All of
these returns are subject to examination by their respective taxing jurisdictions from the date of filing through each applicable statute
of limitation period. Other periods for entities acquired are still open and subject to examination. Generally, periods prior to 2012 are
no longer subject to examination.
F-36
Table of Contents
During fiscal year 2021, the New York Department of Finance and Taxation and the Utah State Tax Commission commenced
examinations of Varex’s tax returns for the years 2017, 2018, and 2019, which remain open as of September 30, 2022. The Swedish
Tax Agency commenced an examination of Direct Conversion’s tax returns for the fiscal year 2019 in fiscal year 2022 and closed the
examination with no adjustments. Although the outcome of tax audits are uncertain, based on currently available information, the
Company believes the outcomes will not have a material adverse effect on the Company’s financial position.
16. SEGMENT INFORMATION
The Company has two reportable operating segments: Medical and Industrial, which aligns with how its Chief Executive
Officer ("CEO"), who is the Company's Chief Operating Decision Maker (“CODM”), reviews the Company’s performance. The
segments align the Company’s products and service offerings with customer use in medical and industrial markets and are consistent
with how the Company’s CEO evaluates the business for the allocation of resources. The CODM allocates resources to and evaluates
the financial performance of each operating segment primarily based on revenues and gross profit. The operating and reportable
segment structure provides alignment between business strategies and operating results.
Description of Segments
The Medical segment designs, manufactures, sells and services X-ray imaging components, including X-ray tubes, digital
detectors, high voltage connectors, image-processing software and workstations, 3D reconstruction software, computer-aided
diagnostic software, collimators, automatic exposure control devices, generators, heat exchangers, ionization chambers and buckys (a
component of X-ray units that holds X-ray film cassettes). These components are used in a range of medical imaging applications
including CT, mammography, oncology, cardiac, surgery, dental, and other diagnostic radiography uses.
The Industrial segment designs, develops, manufactures, sells and services X-ray imaging products for use in a number of
markets, including security applications for cargo screening at ports and borders and baggage screening at airports, and nondestructive
testing and inspection applications used in a number of other markets. The Company's Industrial products include Linatron® X-ray
linear accelerators, X-ray tubes, digital detectors and high voltage connectors. In addition, the Company licenses proprietary image-
processing and detection software designed to work with other Varex products to provide packaged sub-assembly solutions to
Industrial customers.
Accordingly, the following information is provided for purposes of achieving an understanding of operations, but it may not
be indicative of the financial results of the reported segments were they independent organizations. In addition, comparisons of the
Company’s operations to similar operations of other companies may not be meaningful.
Information related to the Company’s segments is as follows:
(In millions)
Revenues
Medical
Industrial
Total revenues
Gross profit
Medical
Industrial
Total gross profit
Total operating expenses
Interest and other expense, net
Income (loss) before taxes
Income tax expense (benefit)
Net income (loss)
Less: Net income attributable to noncontrolling interests
Net income (loss) attributable to Varex
2022
$
Fiscal Year
2021
2020
674.7 $
184.7
859.4
210.5
73.0
283.5
195.3
(43.7)
44.5
13.7
30.8
0.5
643.8 $
174.3
818.1
203.2
68.3
271.5
197.4
(45.5)
28.6
10.7
17.9
0.5
$
30.3 $
17.4 $
584.5
153.8
738.3
136.4
53.8
190.2
223.9
(38.9)
(72.6)
(15.2)
(57.4)
0.5
(57.9)
The Company does not disclose total assets by segment as this information is not provided to the CODM.
F-37
Table of Contents
Geographic Information
(In millions)
Americas
EMEA
APAC
Total company
Revenues
Fiscal Years
2021
2022
Long-Lived Assets
Fiscal Years
2020
2022
2021
$
$
273.3 $
268.5 $
255.0 $
99.8 $
280.8
305.3
276.3
273.3
231.5
251.8
23.2
18.3
859.4 $
818.1 $
738.3 $
141.3 $
105.4
23.9
10.9
140.2
Revenue in the United States of America was $263.7 million, $262.3 million and $249.8 million in fiscal years 2022, 2021
and 2020, respectively.
The Company operates various manufacturing and marketing operations outside the United States. Americas includes North
and South America. EMEA includes Europe, Russia, the Middle East, India and Africa. APAC includes Asia and Australia. Revenues
by region are based on the known final destination of products sold.
17. EMPLOYEE BENEFIT PLANS
Varex’s 401(k) plan is intended to be qualified under Section 401(a) of the Code with the 401(k) plan’s related trust intended
to be tax exempt under Section 501(a) of the Code and intended for all full-time employees in the United States. This plan allows
employees to contribute a portion of their pretax salary up to the maximum dollar limitation prescribed by the Internal Revenue
Service. The Company made matching contributions to the plan totaling $4.4 million, $2.8 million and $4.4 million in fiscal years
2022, 2021 and 2020, respectively.
The Company also maintains defined benefit plans for certain employees located outside the US. The net pension liability is
included in other long-term liabilities on the Company's Consolidated Balance Sheets and totaled $3.3 million and $5.9 million as of
September 30, 2022 and October 1, 2021, respectively. The Company’s net periodic benefit costs for the Company’s defined benefit
plans were not material for fiscal years 2022, 2021, and 2020.
18. ACCUMULATED OTHER COMPREHENSIVE INCOME
The following tables present the changes in the accumulated balances for each component of other comprehensive income
(loss):
(In millions)
Balance at October 2, 2020
Other comprehensive loss before
reclassifications
Income tax impact
Foreign currency translation adjustment
Balance at October 1, 2021
Other comprehensive (loss) income before
reclassifications
Income tax impact
Foreign currency translation adjustment
Unrealized
(Loss) Gain on
Derivative
Financial
Instruments
Unrealized
(Loss) Gain on
Defined Benefit
Obligations
CTA, Including
Impact of Net
Investment
Hedge
Unrealized Loss
on Available-
for-Sale
Securities
Accumulated
Other
Comprehensive
Income (Loss)
$
$
— $
(0.7) $
1.5 $
— $
—
—
—
(0.1)
—
—
(0.3)
0.1
(0.5)
—
—
—
— $
(0.8) $
0.8 $
— $
(0.8)
0.2
—
2.0
(0.6)
—
8.7
(0.4)
(8.9) $
0.2 $
(0.1)
—
—
(0.1) $
0.8
(0.4)
0.1
(0.5)
—
9.8
(0.8)
(8.9)
0.1
Balance at September 30, 2022
$
(0.6) $
0.6 $
F-38